| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Although there is a kfree_skb_reason() helper function that can be used to
find the reason why this skb is dropped, but most callers didn't increase
one of rx_dropped, tx_dropped, rx_nohandler and rx_otherhost_dropped.
For the users, people are more concerned about why the dropped in ip
is increasing.
Introduce netdev_core_stats_inc() for trace the caller of
dev_core_stats_*_inc().
Also, add __code to netdev_core_stats_alloc(), as it's called with small
probability. And add noinline make sure netdev_core_stats_inc was never
inlined.
Signed-off-by: Yajun Deng <[email protected]>
Suggested-by: Alexander Lobakin <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Updating drm-misc-next to the state of Linux v6.6-rc2.
Signed-off-by: Thomas Zimmermann <[email protected]>
|
|
Correct punctuation and drop an extraneous word.
Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
VMAs are skipped if there is no recent fault activity but this represents
a chicken-and-egg problem as there may be no fault activity if the PTEs
are never updated to trap NUMA hints. There is an indirect reliance on
scanning to be forced early in the lifetime of a task but this may fail
to detect changes in phase behaviour. Force inactive VMAs to be scanned
when all other eligible VMAs have been updated within the same scan
sequence.
Test results in general look good with some changes in performance, both
negative and positive, depending on whether the additional scanning and
faulting was beneficial or not to the workload. The autonuma benchmark
workload NUMA01_THREADLOCAL was picked for closer examination. The workload
creates two processes with numerous threads and thread-local storage that
is zero-filled in a loop. It exercises the corner case where unrelated
threads may skip VMAs that are thread-local to another thread and still
has some VMAs that inactive while the workload executes.
The VMA skipping activity frequency with and without the patch:
6.6.0-rc2-sched-numabtrace-v1
=============================
649 reason=scan_delay
9,094 reason=unsuitable
48,915 reason=shared_ro
143,919 reason=inaccessible
193,050 reason=pid_inactive
6.6.0-rc2-sched-numabselective-v1
=============================
146 reason=seq_completed
622 reason=ignore_pid_inactive
624 reason=scan_delay
6,570 reason=unsuitable
16,101 reason=shared_ro
27,608 reason=inaccessible
41,939 reason=pid_inactive
Note that with the patch applied, the PID activity is ignored
(ignore_pid_inactive) to ensure a VMA with some activity is completely
scanned. In addition, a small number of VMAs are scanned when no other
eligible VMA is available during a single scan window (seq_completed).
The number of times a VMA is skipped due to no PID activity from the
scanning task (pid_inactive) drops dramatically. It is expected that
this will increase the number of PTEs updated for NUMA hinting faults
as well as hinting faults but these represent PTEs that would otherwise
have been missed. The tradeoff is scan+fault overhead versus improving
locality due to migration.
On a 2-socket Cascade Lake test machine, the time to complete the
workload is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Min elsp-NUMA01_THREADLOCAL 174.22 ( 0.00%) 117.64 ( 32.48%)
Amean elsp-NUMA01_THREADLOCAL 175.68 ( 0.00%) 123.34 * 29.79%*
Stddev elsp-NUMA01_THREADLOCAL 1.20 ( 0.00%) 4.06 (-238.20%)
CoeffVar elsp-NUMA01_THREADLOCAL 0.68 ( 0.00%) 3.29 (-381.70%)
Max elsp-NUMA01_THREADLOCAL 177.18 ( 0.00%) 128.03 ( 27.74%)
The time to complete the workload is reduced by almost 30%:
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1 /
Duration User 91201.80 63506.64
Duration System 2015.53 1819.78
Duration Elapsed 1234.77 868.37
In this specific case, system CPU time was not increased but it's not
universally true.
From vmstat, the NUMA scanning and fault activity is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Ops NUMA base-page range updates 64272.00 26374386.00
Ops NUMA PTE updates 36624.00 55538.00
Ops NUMA PMD updates 54.00 51404.00
Ops NUMA hint faults 15504.00 75786.00
Ops NUMA hint local faults % 14860.00 56763.00
Ops NUMA hint local percent 95.85 74.90
Ops NUMA pages migrated 1629.00 6469222.00
Both the number of PTE updates and hint faults is dramatically
increased. While this is superficially unfortunate, it represents
ranges that were simply skipped without the patch. As a result
of the scanning and hinting faults, many more pages were also
migrated but as the time to completion is reduced, the overhead
is offset by the gain.
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Raghavendra K T <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
NUMA Balancing skips VMAs when the current task has not trapped a NUMA
fault within the VMA. If the VMA is skipped then mm->numa_scan_offset
advances and a task that is trapping faults within the VMA may never
fully update PTEs within the VMA.
Force tasks to update PTEs for partially scanned PTEs. The VMA will
be tagged for NUMA hints by some task but this removes some of the
benefit of tracking PID activity within a VMA. A follow-on patch
will mitigate this problem.
The test cases and machines evaluated did not trigger the corner case so
the performance results are neutral with only small changes within the
noise from normal test-to-test variance. However, the next patch makes
the corner case easier to trigger.
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Raghavendra K T <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add L1 PM Substates Control 2 Register fields (PCI_L1SS_CTL2_*).
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <[email protected]>
Acked-by: Michael Ellerman <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering)
- fix hv_kvp_daemon to support keyfile based connection profile
(Shradha Gupta)
* tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv/hv_kvp_daemon:Support for keyfile based connection profile
hyperv: reduce size of ms_hyperv_info
x86/hyperv: Add common print prefix "Hyper-V" in hv_init
x86/hyperv: Remove hv_vtl_early_init initcall
x86/hyperv: Restrict get_vtl to only VTL platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending fixes since a couple of weeks ago, which
became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply"
* tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
ALSA: hda/realtek: Change model for Intel RVP board
ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset
ALSA: hda: cs35l41: Cleanup and fix double free in firmware request
ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells
ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
ASoC: rt5682: Fix regulator enable/disable sequence
ASoC: hdmi-codec: Fix broken channel map reporting
ASoC: core: Do not call link_exit() on uninitialized rtd objects
ASoC: core: Print component name when printing log
ASoC: SOF: amd: fix for firmware reload failure after playback
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP
ASoC: simple-card: fixup asoc_simple_probe() error handling
ASoC: simple-card-utils: fixup simple_util_startup() error handling
ASoC: Intel: sof_sdw: add support for SKU 0B14
...
|
|
Extend IOMMU_HWPT_ALLOC to allocate domains to be used as parent (stage-2)
in nested translation.
Add IOMMU_HWPT_ALLOC_NEST_PARENT to the uAPI.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Yi Liu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Lu Baolu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Introduce a new iommu_domain op to create domains owned by userspace,
e.g. through IOMMUFD. These domains have a few different properties
compares to kernel owned domains:
- They may be PAGING domains, but created with special parameters.
For instance aperture size changes/number of levels, different
IOPTE formats, or other things necessary to make a vIOMMU work
- We have to track all the memory allocations with GFP_KERNEL_ACCOUNT
to make the cgroup sandbox stronger
- Device-specialty domains, such as NESTED domains can be created by
IOMMUFD.
The new op clearly says the domain is being created by IOMMUFD, that the
domain is intended for userspace use, and it provides a way to pass user
flags or a driver specific uAPI structure to customize the created domain
to exactly what the vIOMMU userspace driver requires.
iommu drivers that cannot support VFIO/IOMMUFD should not support this
op. This includes any driver that cannot provide a fully functional PAGING
domain.
This new op for now is only supposed to be used by IOMMUFD, hence no
wrapper for it. IOMMUFD would call the callback directly. As for domain
free, IOMMUFD would use iommu_domain_free().
Link: https://lore.kernel.org/r/[email protected]
Suggested-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Co-developed-by: Nicolin Chen <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
We have adjacent changes for the cs42l43 DT schema, merge the fixes
branch up so that there's a single thing for people to base future
changes on.
|
|
Add comments for nlpid, family, udlen and udata in struct nft_table, and
afinfo is no longer a member of struct nft_table, so remove the comment
for it.
Signed-off-by: George Guo <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
nf_conntrack_alter_reply doesn't do helper reassignment anymore.
Remove the comments that make this claim.
Furthermore, remove dead code from the function and place ot
in nf_conntrack.h.
Signed-off-by: Florian Westphal <[email protected]>
|
|
This makes it harder for accidental or malicious changes to
sockfs_xattr_handlers at runtime.
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: [email protected]
Signed-off-by: Wedson Almeida Filho <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
provisioned at device manufacturing.
Signed-off-by: Matt Johnston <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Add dt-bindings compatibles and interconnect IDs for
Qualcomm SDX75 platform.
Signed-off-by: Rohit Agarwal <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
NUMA balancing skips or scans VMAs for a variety of reasons. In preparation
for completing scans of VMAs regardless of PID access, trace the reasons
why a VMA was skipped. In a later patch, the tracing will be used to track
if a VMA was forcibly scanned.
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
::next_pid_reset => ::pids_active_reset
The access_pids[] field name is somewhat ambiguous as no PIDs are accessed.
Similarly, it's not clear that next_pid_reset is related to access_pids[].
Rename the fields to more accurately reflect their purpose.
[ mingo: Rename in the comments too. ]
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Document the intended usage of the fields.
[ mingo: Reformatted to take less vertical space & tidied it up. ]
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Indicate next PN update using update_pn flag in macsec_context.
Offloaded MACsec implementations does not know whether or not the
MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume
that next PN should always updated, but this is not always true.
The PN can be reset to its initial value using the following command:
$ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case
Or, the update PN command will succeed even if the driver does not support
PN updates.
$ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case
Comparing the initial PN with the new PN value is not a solution. When
the user updates the PN using its initial value the command will
succeed, even if the driver does not support it. Like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case
Signed-off-by: Radu Pirea (NXP OSS) <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In order to better estimate whether a data packet has been
retransmitted or is the result of a TLP, we save the last received
ipv6 flowlabel.
To make space for this field we resize the "ato" field in
inet_connection_sock as the current value of TCP_DELACK_MAX can be
fully contained in 8 bits and add a compile_time_assert ensuring this
field is the required size.
v2: addressed kernel bot feedback about dccp_delack_timer()
v3: addressed build error introduced by commit bbf80d713fe7 ("tcp:
derive delack_max from rto_min")
Signed-off-by: David Morley <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Tested-by: David Morley <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Current pattern in the linux kernel is that every new serial driver adds
one or more new PORT_ definitions because uart_ops::config_port()
callback documentation prescribes setting port->type according to the
type of port found, or to PORT_UNKNOWN if no port was detected.
When the specific type of the port is not important to the userspace
there's no need for a unique PORT_ value, but so far there's no suitable
identifier for that case.
Provide generic port type identifier other than PORT_UNKNOWN for ports
which type is not important to userspace.
Suggested-by: Arnd Bergmann <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Max Filippov <[email protected]>
Suggested-by: Jiri Slaby <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Correct typo of "its".
Add commas for clarity.
Capitalize L3.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: [email protected]
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: [email protected]
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Provide the generic sync_try_cmpxchg() function from the
raw_ prefixed version, also adding explicit instrumentation.
The patch amends existing scripts to generate sync_try_cmpxchg()
locking primitive and its raw_sync_try_cmpxchg() fallback, while
leaving existing macros from the try_cmpxchg() family unchanged.
The target can define its own arch_sync_try_cmpxchg() to override the
generic version of raw_sync_try_cmpxchg(). This allows the target
to generate more optimal assembly than the generic version.
Additionally, the patch renames two scripts to better reflect
whet they really do.
Signed-off-by: Uros Bizjak <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: [email protected]
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
BPF supports creating high resolution timers using bpf_timer_* helper
functions. Currently, only the BPF_F_TIMER_ABS flag is supported, which
specifies that the timeout should be interpreted as absolute time. It
would also be useful to be able to pin that timer to a core. For
example, if you wanted to make a subset of cores run without timer
interrupts, and only have the timer be invoked on a single core.
This patch adds support for this with a new BPF_F_TIMER_CPU_PIN flag.
When specified, the HRTIMER_MODE_PINNED flag is passed to
hrtimer_start(). A subsequent patch will update selftests to validate.
Signed-off-by: David Vernet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Acked-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
As it is currently declared, the xattr_handler structs are const but the
array containing their pointers is not. This patch makes it so that fs
modules can place them in .rodata, which makes it harder for
accidental/malicious modifications at runtime.
Signed-off-by: Wedson Almeida Filho <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Add rtc_bound_alarmtime() to return the requested alarm timeout bound by
the maxmum alarm timeout that is supported by a given RTC.
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
|
|
With no more users, we can remove acpi_get_and_request_gpiod().
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: From: Andy Shevchenko <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
|
|
Some drivers use one event callback for multiple widgets but still need
to perform a bit different actions based on actual widget. This is done
by comparing widget name, however drivers tend to miss possible name
prefix. Add a helper to solve common mistakes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Greco was not upstreamed so no point of mentioning it here.
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Ofir Bitton <[email protected]>
|
|
- Update copyright years
- Add missing newline at end of file
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Ofir Bitton <[email protected]>
|
|
- Update copyright years
- Align comments
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Ofir Bitton <[email protected]>
|
|
In order to get a full picture of DMA mappings (e.g. to track DMAR
errors), DMA mappings APIs should be covered.
Signed-off-by: Ohad Sharabi <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
update hl_boot_if.h from specs to include
CPU_BOOT_STATUS_FW_SHUTDOWN_PREP
Signed-off-by: Dafna Hirschfeld <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
This is the second patch for applying the eq health check mechanism
which will add support for the interrupt flow for gaudi2 asic.
More info about the interrupt mechanism:
set a dedicated msix for the eq error interrupt, and add
interrupt handler for it.
when FW detects some issue with EQ like EQ_FULL, it'll
raise that interrupt and driver should reset the device.
Driver will inform the FW which msix index to use through
the already existing handshake mechanism which will
send msix info message to fw.
Signed-off-by: farah kassabri <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Add mechanism for fw eq health check. this will be done using two flows:
using the heartbeat mechanism and raising a dedicated interrupt to
indicate an eq failure like EQ full.
This patch will add implementation for the eq heartbeat for gaudi2 asic.
More info about the heartbeat mechanism:
Expand the heartbeat mechanism to monitor a new event that
will be sent from FW upon receiving heartbeat message.
that way driver can know that the eq is working or not.
Signed-off-by: farah kassabri <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Add tsc clock to clock sync info, to enable using this clock for
sampling and sync it with device time.
Signed-off-by: Hen Alon <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
The CPUCP interface is moved to a shared folder outside of accel as
a pre-requisite to upstream the NIC drivers that will also include
this file.
Signed-off-by: David Meriin <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
To use drm_ioctl(), move the ioctls to the device specific ioctls
range at [DRM_COMMAND_BASE, DRM_COMMAND_END).
Signed-off-by: Tomer Tayar <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
User gets notification for every engine error report, but he still
lacks the exact engine information. Hence, we allow user to query
for the exact engine reported an error.
Signed-off-by: Ofir Bitton <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
The PLL requires a clock frequency in a certain platform-dependent range
after the pre-divider. The reference clock for the PLL may change due to
changes to it's parent clock. Thus, the frequency may be out of range or
unsuited for generating the high speed clock for MIPI DSI.
Try to keep the pre-devider small, and set the reference clock close to
the upper limit before recalculating the PLL configuration. Use a
divider with a power of two for the reference clock as this seems to
work best in my tests.
Reviewed-by: Marco Felsch <[email protected]>
Tested-by: Frieder Schrempf <[email protected]> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Signed-off-by: Michael Tretter <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The PLL reference clock may change at runtime when its parent clock
changes. For example, this may happen on the i.MX8M Nano if the
reference clock is a child of the Video PLL. If the pixel clock changes,
this may propagate to the Video PLL and as a side effect change the
reference clock. Thus, reading the clock rate during probe is not
sufficient to correctly configure the PLL for the expected hs clock.
Read the actual rate of the reference clock before calculating the PLL
configuration parameters.
Note that the "samsung,pll-clock-frequency" is always preferred and PLL
reference clock is only read from the clock tree if that device tree
property is not set.
Reviewed-by: Inki Dae <[email protected]>
Acked-by: Inki Dae <[email protected]>
Tested-by: Frieder Schrempf <[email protected]> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <[email protected]>
Signed-off-by: Michael Tretter <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move hash_and_copy_to_iter() to be with its only caller in networking code.
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Alexander Viro <[email protected]>
cc: Jens Axboe <[email protected]>
cc: Christoph Hellwig <[email protected]>
cc: Christian Brauner <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: Linus Torvalds <[email protected]>
cc: David Laight <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Move csum_and_copy_from_iter_full() out of line and then merge
csum_and_copy_from_iter() into its only caller.
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Alexander Viro <[email protected]>
cc: Jens Axboe <[email protected]>
cc: Christoph Hellwig <[email protected]>
cc: Christian Brauner <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: Linus Torvalds <[email protected]>
cc: David Laight <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Fold csum_and_memcpy() in to its callers.
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Alexander Viro <[email protected]>
cc: Jens Axboe <[email protected]>
cc: Christoph Hellwig <[email protected]>
cc: Christian Brauner <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: Linus Torvalds <[email protected]>
cc: David Laight <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Move csum_and_copy_to/from_iter() to net code now that the iteration
framework can be #included.
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Alexander Viro <[email protected]>
cc: Jens Axboe <[email protected]>
cc: Christoph Hellwig <[email protected]>
cc: Christian Brauner <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: Linus Torvalds <[email protected]>
cc: David Laight <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|