| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Immutable branch between pdx86 amd wbrf branch and wifi / amdgpu due for the v6.8 merge window
platform-drivers-x86-amd-wbrf-v6.8-1: v6.7-rc1 + AMD WBRF support
for merging into the wifi subsys and amdgpu driver for 6.8.
|
|
Use "its" for possessive form instead of "it's".
Hyphenate multi-word adjectives.
Correct some spelling.
End one line of code with ';' instead of ','. The before and after
object files are identical.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: [email protected]
Reviewed-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot process, so early that it cannot use the
flush_cache_vmap() function which may depend on structures not yet
initialized (for example in riscv, we currently send an IPI to flush
other cpus TLB).
But on some architectures, we must call flush_cache_vmap(): for example,
in riscv, some uarchs can cache invalid TLB entries so we need to flush
the new established mapping to avoid taking an exception.
So fix this by introducing a new function flush_cache_vmap_early() which
is called right after setting the new page table entry and before
accessing this new mapping. This new function implements a local flush
tlb on riscv and is no-op for other architectures (same as today).
Signed-off-by: Alexandre Ghiti <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Dennis Zhou <[email protected]>
|
|
These callbacks can be implemented by the controller drivers to perform
async read/write operation that increases the throughput.
For aiding the async operation, a completion callback is also introduced.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
|
|
In the preparation for adding async API support, let's rename the existing
APIs to read_sync() and write_sync() to make it explicit that these APIs
are used for synchronous read/write.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
|
|
In the preparation of DMA async support, let's pass the parameters to
read_from_host() and write_to_host() APIs using mhi_ep_buf_info structure.
No functional change.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
|
|
Use slab allocator for allocating the memory for objects used frequently
and are of fixed size. This reduces the overheard associated with
kmalloc().
Suggested-by: Alex Elder <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
|
|
Allow the user to set the symmetric Toeplitz hash function via:
# ethtool -X eth0 hfunc toeplitz symmetric-xor
The driver will reject any new RSS configuration if a field other than
(IP src/dst and L4 src/dst ports) is requested for hashing.
The symmetric RSS will not be supported on PFs not advertising the ADV RSS
Offload flag (ADV_RSS_SUPPORT()), for example the E700 series (i40e).
Reviewed-by: Madhu Chittim <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Refactor the driver to use a communication data structure for RSS
config. To do so we introduce the new ice_rss_hash_cfg struct, and then
pass it as an argument to several functions.
Also introduce enum ice_rss_cfg_hdr_type to specify a more granular and
flexible RSS configuration:
ICE_RSS_OUTER_HEADERS - take outer layer as RSS input set
ICE_RSS_INNER_HEADERS - take inner layer as RSS input set
ICE_RSS_INNER_HEADERS_W_OUTER_IPV4 - take inner layer as RSS input set for
packet with outer IPV4
ICE_RSS_INNER_HEADERS_W_OUTER_IPV6 - take inner layer as RSS input set for
packet with outer IPV6
ICE_RSS_ANY_HEADERS - try with outer first then inner (same as the
behaviour without this change)
Finally, move the virtchnl_rss_algorithm enum to be with the other RSS
related structures in the virtchnl.h file.
There should be no functional change due to this patch.
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Qi Zhang <[email protected]>
Co-developed-by: Jesse Brandeburg <[email protected]>
Signed-off-by: Jesse Brandeburg <[email protected]>
Co-developed-by: Ahmed Zaki <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Symmetric RSS hash functions are beneficial in applications that monitor
both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc).
Getting all traffic of the same flow on the same RX queue results in
higher CPU cache efficiency.
A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry
by XORing the source and destination fields and pass the values to the
RSS hash algorithm.
The user may request RSS hash symmetry for a specific algorithm, via:
# ethtool -X eth0 hfunc <hash_alg> symmetric-xor
or turn symmetry off (asymmetric) by:
# ethtool -X eth0 hfunc <hash_alg>
The specific fields for each flow type should then be specified as usual
via:
# ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add the RSS context parameters to struct ethtool_rxfh_param and use the
get/set_rxfh to handle the RSS contexts as well.
This is part 2/2 of the fix suggested in [1]:
- Add a rss_context member to the argument struct and a capability
like cap_link_lanes_supported to indicate whether driver supports
rss contexts, then you can remove *et_rxfh_context functions,
and instead call *et_rxfh() with a non-zero rss_context.
Link: https://lore.kernel.org/netdev/[email protected]/ [1]
CC: Jesse Brandeburg <[email protected]>
CC: Tony Nguyen <[email protected]>
CC: Marcin Wojtas <[email protected]>
CC: Russell King <[email protected]>
CC: Sunil Goutham <[email protected]>
CC: Geetha sowjanya <[email protected]>
CC: Subbaraya Sundeep <[email protected]>
CC: hariprasad <[email protected]>
CC: Saeed Mahameed <[email protected]>
CC: Leon Romanovsky <[email protected]>
CC: Edward Cree <[email protected]>
CC: Martin Habets <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/[email protected]/ [1]
Suggested-by: Jakub Kicinski <[email protected]>
Suggested-by: Jacob Keller <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some devices(eg. SDX75) take longer than expected (default, 8 seconds) to
set ready after reboot. Hence add optional ready timeout parameter and pass
the appropriate timeout value to mhi_poll_reg_field() to wait enough for
device ready as part of power up sequence.
Signed-off-by: Qiang Yu <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
|
|
This driver does not have any in-tree users but is passing a
legacy GPIO number through platform data.
Convert it to use a GPIO descriptor, new users or outoftree
users can easily be implemented using GPIO descriptor tables
or software nodes.
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The driver supports passing some GPIO lines for rows and columns
through the driver data, but there is no in-kernel user of this.
Further the use seems convoluted because the GPIO lines are unused
in the driver, then explicitly free:ed when removing it without
being requested when probing it, which is assymetric and just
a recepie for disaster.
Remove the support for these unused GPIOs, if need be support can
be reestablished in an organized fashion using GPIO descriptors.
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The Navpoint driver uses a GPIO line, convert this to use
a GPIO descriptor. There are no in-kernel users but out of tree
users can easily be added or converted using a GPIO descriptor
table as with numerous other drivers.
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Bean Huo <[email protected]> says:
Adding RTC support for embedded storage device UFS in its driver, it
is important for a few key reasons:
1. Helps with Regular Maintenance:
The RTC provides a basic way to keep track of time, making it useful for
scheduling routine maintenance tasks in the storage device. This includes
things like making sure data is spread
evenly across the storage to extend its life.
2. Figuring Out How Old Data Is:
The RTC helps the device estimate how long ago certain parts of the storage
were last used. This is handy for deciding when to do maintenance tasks to
keep the storage working well over time.
3. Making Devices Last Longer:
By using the RTC for regular upkeep, we can make sure the storage device lasts
longer and stays reliable. This is especially important for devices that need
to work well for a long time.
4.Fitting In with Other Devices:
The inclusion of RTC support aligns with existing UFS specifications (starting
from UFS Spec 2.0) and is consistent with the prevalent industry practice. Many
UFS devices currently on the market utilize RTC for internal timekeeping. By
ensuring compatibility with this widely adopted standard, the embedded storage
device becomes seamlessly integrable with existing hardware and software
ecosystems, reducing the risk of compatibility issues.
In short, adding RTC support to embedded storage device UFS helps with regular
upkeep, extends the device's life, ensures compatibility, and keeps everything
running smoothly with the rest of the system.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Introduce a sysfs node named 'rtc_update_ms' within the kernel, enabling
user to adjust the RTC periodic update frequency to suit the specific
requirements of the system and UFS. Also, this patch allows the user to
disable/enable periodic update RTC in the UFS idle time.
Signed-off-by: Bean Huo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Avri Altman <[email protected]>
Reviewed-by: Thomas Weißschuh <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add Real Time Clock (RTC) support for UFS device. This enhancement is
crucial for the internal maintenance operations of the UFS device. The
patch enables the device to handle both absolute and relative time
information. Furthermore, it includes periodic task to update the RTC in
accordance with the UFS Spec, ensuring the accuracy of RTC information for
the device's internal processes.
RTC and qTimestamp serve distinct purposes. The RTC provides a coarse level
of granularity with, at best, approximate single-second resolution. This
makes the RTC well-suited for the device to determine the approximate age
of programmed blocks after being updated by the host. On the other hand,
qTimestamp offers nanosecond granularity and is specifically designed for
synchronizing Device Error Log entries with corresponding host-side logs.
Given that the RTC has been a standard feature since UFS Spec 2.0, and
qTimestamp was introduced in UFS Spec 4.0, the majority of UFS devices
currently on the market rely on RTC. Therefore, it is advisable to continue
supporting RTC in the Linux kernel. This ensures compatibility with the
prevailing UFS device implementations and facilitates seamless integration
with existing hardware. By maintaining support for RTC, we ensure broad
compatibility and avoid potential issues arising from deviations in device
specifications across different UFS versions.
Signed-off-by: Bean Huo <[email protected]>
Signed-off-by: Mike Bi <[email protected]>
Signed-off-by: Luca Porzio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Avri Altman <[email protected]>
Reviewed-by: Thomas Weißschuh <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Manivannan Sadhasivam <[email protected]> says:
Hello,
This series has code some cleanups to the Qcom UFS driver. No
functional change. In this version, I've removed code supporting
legacy controllers ver < 2.0, as the respective platforms were never
supported in upstream.
Tested on: RB5 development board based on Qcom SM8250 SoC.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Instead of duplicating the enable/disable IRQ part, let's export the
helpers available in ufshcd driver and make use of them. This also fixes
the possible redundant IRQ disable before asserting reset (when IRQ was
already disabled).
Fixes: 4a791574a0cc ("scsi: ufs: ufs-qcom: Disable interrupt in reset path")
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Andrew Halaney <[email protected]> # sa8775p-ride
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
To support multiple users referencing the same fragment,
'pp_frag_count' is renamed to 'pp_ref_count', transitioning pp pages
from fragment management to reference count management after draining
based on the suggestion from [1].
The idea is that the concept of fragmenting exists before the page is
drained, and all related functions retain their current names.
However, once the page is drained, its management shifts to being
governed by 'pp_ref_count'. Therefore, all functions associated with
that lifecycle stage of a pp page are renamed.
[1]
http://lore.kernel.org/netdev/[email protected]
Signed-off-by: Liang Chen <[email protected]>
Reviewed-by: Yunsheng Lin <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Follow up commit 9690ae604290 ("ethtool: add header/data split
indication") and add the set part of Ethtool's header split, i.e.
ability to enable/disable header split via the Ethtool Netlink
interface. This might be helpful to optimize the setup for particular
workloads, for example, to avoid XDP frags, and so on.
A driver should advertise ``ETHTOOL_RING_USE_TCP_DATA_SPLIT`` in its
ops->supported_ring_params to allow doing that. "Unknown" passed from
the userspace when the header split is supported means the driver is
free to choose the preferred state.
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The transport interface send (TIS) object is responsible for performing
all transport related operations of the transmit side. Messages from
Send Queues get segmented and transmitted by the TIS including all
transport required implications, e.g. in the case of large send offload,
the TIS is responsible for the segmentation.
These are stateless objects and can be used by multiple netdevs (e.g.
representors) who share the same core device.
Providing the TISes as a service from the core layer to the netdev layer
reduces the number of replecated TIS objects (in case of multiple
netdevs), and will ease the transition to netdev with multiple mdevs.
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
MPIR register allows to query the PCIe indexes
and Socket-Direct related parameters.
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Multiple device caps and features are required to support
single netdev Socket-Direct.
Add them here in preparation for the feature implementation.
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Move part of the genphy_c45_pma_read_abilities() code to a separate
function.
Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but
do implement PMA/PMD extended ability register (Register 1.11). To make
use of it, we need to be able to access this part of code separately.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
tcf_idr_insert_many will replace the allocated -EBUSY pointer in
tcf_idr_check_alloc with the real action pointer, exposing it
to all operations. This operation is only needed when the action pointer
is created (ACT_P_CREATED). For actions which are bound to (returned 0),
the pointer already resides in the idr making such operation a nop.
Even though it's a nop, it's still not a cheap operation as internally
the idr code walks the idr and then does a replace on the appropriate slot.
So if the action was bound, better skip the idr replace entirely.
Signed-off-by: Pedro Tammela <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Reviewed-by: Vlad Buslov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
I added logic to track the sock pair for stream_unix sockets so that we
ensure lifetime of the sock matches the time a sockmap could reference
the sock (see fixes tag). I forgot though that we allow af_unix unconnected
sockets into a sock{map|hash} map.
This is problematic because previous fixed expected sk_pair() to exist
and did not NULL check it. Because unconnected sockets have a NULL
sk_pair this resulted in the NULL ptr dereference found by syzkaller.
BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
Write of size 4 at addr 0000000000000080 by task syz-executor360/5073
Call Trace:
<TASK>
...
sock_hold include/net/sock.h:777 [inline]
unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
sock_map_init_proto net/core/sock_map.c:190 [inline]
sock_map_link+0xb87/0x1100 net/core/sock_map.c:294
sock_map_update_common+0xf6/0x870 net/core/sock_map.c:483
sock_map_update_elem_sys+0x5b6/0x640 net/core/sock_map.c:577
bpf_map_update_value+0x3af/0x820 kernel/bpf/syscall.c:167
We considered just checking for the null ptr and skipping taking a ref
on the NULL peer sock. But, if the socket is then connected() after
being added to the sockmap we can cause the original issue again. So
instead this patch blocks adding af_unix sockets that are not in the
ESTABLISHED state.
Reported-by: Eric Dumazet <[email protected]>
Reported-by: [email protected]
Fixes: 8866730aed51 ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock")
Acked-by: Jakub Sitnicki <[email protected]>
Signed-off-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Implement the newly added .xmo_rx_vlan_tag() hint function.
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
__vlan_hwaccel_get_tag() is used in veth XDP hints implementation,
its return value (-EINVAL if skb is not VLAN tagged) is passed to bpf code,
but XDP hints specification requires drivers to return -ENODATA, if a hint
cannot be provided for a particular packet.
Solve this inconsistency by changing error return value of
__vlan_hwaccel_get_tag() from -EINVAL to -ENODATA, do the same thing to
__vlan_get_tag(), because this function is supposed to follow the same
convention. This, in turn, makes -ENODATA the only non-zero value
vlan_get_tag() can return. We can do this with no side effects, because
none of the users of the 3 above-mentioned functions rely on the exact
value.
Suggested-by: Jesper Dangaard Brouer <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Implement functionality that enables drivers to expose VLAN tag
to XDP code.
VLAN tag is represented by 2 variables:
- protocol ID, which is passed to bpf code in BE
- VLAN TCI, in host byte order
Acked-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Commit 94ecc5ca4dbf ("xsk: Add cb area to struct xdp_buff_xsk") has added
a buffer for custom data to xdp_buff_xsk. Particularly, this memory is used
for data, consumed by XDP hints kfuncs. It does not always change on
a per-packet basis and some parts can be set for example, at the same time
as RX queue info.
Add functions to fill all cbs in xsk_buff_pool with the same metadata.
Signed-off-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
RX hash XDP hint requests both hash value and type.
Type is XDP-specific, so we need a separate way to map
these values to the hardware ptypes, so create a lookup table.
Instead of creating a new long list, reuse contents
of ice_decode_rx_desc_ptype[] through preprocessor.
Current hash type enum does not contain ICMP packet type,
but ice devices support it, so also add a new type into core code.
Then use previously refactored code and create a function
that allows XDP code to read RX hash.
Signed-off-by: Larysa Zaremba <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Parse uid and gid in bpf_parse_param() so that they can be passed in as
the `data` parameter when mount() bpffs. This will be useful when we
want to control which user/group has the control to the mounted bpffs,
otherwise a separate chown() call will be needed.
Signed-off-by: Jie Jiang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Mike Frysinger <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Immutable branch between pdx86 amd wbrf branch and wifi / amdgpu due for the v6.8 merge window
platform-drivers-x86-amd-wbrf-v6.8-1: v6.7-rc1 + AMD WBRF support
for merging into the wifi subsys and amdgpu driver for 6.8.
Signed-off-by: Alex Deucher <[email protected]>
|
|
We will add color mgmt properties to DRM planes in the next patches and
we want to track when one of this properties change to define atomic
commit behaviors. Using a similar approach from CRTC color props, we set
a color_mgmt_changed boolean whenever a plane color prop changes.
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Melissa Wen <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Place it in drm_property where drm_property_replace_blob and
drm_property_lookup_blob live. Then we can use the DRM helper for
driver-specific KMS properties too.
Reviewed-by: Harry Wentland <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Signed-off-by: Melissa Wen <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
DRM_OBJECT_MAX_PROPERTY limits the number of properties to be attached
and we are increasing that value all time we add a new property (generic
or driver-specific).
In this series, we are adding 13 new KMS driver-specific properties for
AMD color manage:
- CRTC Gamma enumerated Transfer Function
- Plane: Degamma LUT+size+TF, HDR multiplier, shaper LUT+size+TF, 3D
LUT+size, blend LUT+size+TF (12)
Therefore, just increase DRM_OBJECT_MAX_PROPERTY to a number (64) that
accomodates these new properties and gives some room for others,
avoiding change this number everytime we add a new KMS property.
Reviewed-by: Harry Wentland <[email protected]>
Reviewed-by: Simon Ser <[email protected]>
Signed-off-by: Melissa Wen <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
'fixes.2023.12.13a', 'rcu-tasks.2023.12.12b' and 'srcu.2023.12.13a' into rcu-merge.2023.12.13a
|
|
The brief summary in the docstring for function list_next_or_null_rcu()
states that the function is supposed to provide the "first" member of a
list, whereas in truth it returns the next member.
Change the docstring so it describes what the function actually does.
Signed-off-by: Philipp Stanner <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Neeraj Upadhyay (AMD) <[email protected]>
|
|
It is claimed that srcu_read_lock_nmisafe() NMI-safe. However it
triggers a lockdep if used from NMI because lockdep expects a deadlock
since nothing disables NMIs while the lock is acquired.
This is because commit f0f44752f5f61 ("rcu: Annotate SRCU's update-side
lockdep dependencies") annotates synchronize_srcu() as a write lock
usage. This helps to detect a deadlocks such as
srcu_read_lock();
synchronize_srcu();
srcu_read_unlock();
The side effect is that the lock srcu_struct now has a USED usage in normal
contexts, so it conflicts with a USED_READ usage in NMI. But this shouldn't
cause a real deadlock because the write lock usage from synchronize_srcu()
is a fake one and only used for read/write deadlock detection.
Use a try-lock annotation for srcu_read_lock_nmisafe() to avoid lockdep
complains if used from NMI.
Fixes: f0f44752f5f6 ("rcu: Annotate SRCU's update-side lockdep dependencies")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Neeraj Upadhyay (AMD) <[email protected]>
|
|
Rename min_buffers_needed into min_queued_buffers and update
the documentation about it.
Signed-off-by: Benjamin Gaignard <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
[hverkuil: Drop the change where min_queued_buffers + 1 buffers would be]
[hverkuil: allocated. Now this patch only renames this field instead of making]
[hverkuil: a functional change as well.]
[hverkuil: Renamed 3 remaining min_buffers_needed occurrences.]
|
|
There are a few quirks around using lazy wake for poll unconditionally,
and one of them is related the EPOLLEXCLUSIVE. Those may trigger
exclusive wakeups, which wake a limited number of entries in the wait
queue. If that wake number is less than the number of entries someone is
waiting for (and that someone is also using DEFER_TASKRUN), then we can
get stuck waiting for more entries while we should be processing the ones
we already got.
If we're doing exclusive poll waits, flag the request as not being
compatible with lazy wakeups.
Reported-by: Pavel Begunkov <[email protected]>
Fixes: 6ce4a93dbb5b ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups")
Signed-off-by: Jens Axboe <[email protected]>
|
|
This function was added with a8df7b1ab70b ("leds: add led_trigger_rename
function") 11 yrs ago, but it has no users. So remove it.
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Subdev states store all standard pad configuration data, except for
frame intervals. Fix it by adding interval fields in the
v4l2_subdev_pad_config and v4l2_subdev_stream_config structures, with
corresponding accessor functions and a helper function to implement the
.get_frame_interval() operation.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Due to a historical mishap, the v4l2_subdev_frame_interval structure
is the only part of the V4L2 subdev userspace API that doesn't contain a
'which' field. This prevents trying frame intervals using the subdev
'TRY' state mechanism.
Adding a 'which' field is simple as the structure has 8 reserved fields.
This would however break userspace as the field is currently set to 0,
corresponding to V4L2_SUBDEV_FORMAT_TRY, while the corresponding ioctls
currently operate on the 'ACTIVE' state. We thus need to add a new
subdev client cap, V4L2_SUBDEV_CLIENT_CAP_INTERVAL_USES_WHICH, to
indicate that userspace is aware of this new field.
All drivers that implement the subdev .get_frame_interval() and
.set_frame_interval() operations are updated to return -EINVAL when
operating on the TRY state, preserving the current behaviour.
While at it, fix a bad copy&paste in the documentation of the struct
v4l2_subdev_frame_interval_enum 'which' field.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]> # for imx-media
Reviewed-by: Hans Verkuil <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]> # for tegra-video
Reviewed-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The subdev .[gs]_frame_interval are video operations, but they operate
on pads (and even on streams). Not only is this confusing, it causes
practical issues for drivers as the operations don't receive a subdev
state pointer, requiring manual state handling.
To improve the situation, turn the operations into pad operations, and
extend them to receive a state pointer like other pad operations.
While at it, rename the operations to .[gs]et_frame_interval at the same
time to match the naming scheme of other pad operations. This isn't
strictly necessary, but given that all drivers using those operations
need to be modified, handling the rename separately would generate more
churn for very little gain (if at all).
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Hans Verkuil <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]> # for imx-media
Reviewed-by: Luca Ceresoli <[email protected]> # for tegra-video
Signed-off-by: Hans Verkuil <[email protected]>
|
|
CONFIG_MEDIA_CONTROLLER
The subdev state locking macros and macros to get the active state are
currently behind CONFIG_MEDIA_CONTROLLER. This makes sense, as there can
be no subdev state without MC.
However, we have code paths common to MC and non-MC cases which call
subdev operations that have subdev state as a parameter. In the non-MC
case the state parameter would always be NULL.
Thus it makes sense to allow, e.g.:
v4l2_subdev_call_state_active(sd, pad, get_fmt, fmt)
which for non-MC case would call the subdev passing NULL as the state.
This currently fails:
https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fix the issue by moving the related macros to be outside
CONFIG_MEDIA_CONTROLLER. The v4l2_subdev_lock_state() and
v4l2_subdev_unlock_state() macros will crash if given NULL as the state,
but the other macros behave correctly even when there's no active state,
and they will only call the lock/unlock macros if there is a state.
An alternative fix would be to make another version of
v4l2_subdev_call_state_try() with ifdefs, which would not use any state
macros and would always pass NULL as the state. But having two version
of a macro/function is always more confusing than having just one, so I
went this way.
So, this fixes the v4l2_subdev_call_state_active() macro. But we also
have v4l2_subdev_call_state_try(). It would be possible to fix that
macro by additionally creating "no-op" variants of the state alloc and
free functions. However, v4l2_subdev_call_state_try() is only used by a
single driver (stm32-dcmi), which selects MC, and the macro is supposed
to be removed as soon as the users have been converted away from the
macro. Thus I have not touched the state alloc/free functions, and I
think it makes sense to keep alloc/free functions available only if
there's actually something that can be allocated or freed.
Signed-off-by: Tomi Valkeinen <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Hans Verkuil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Correct spellos reported by codespell.
Fix some grammar (as 's' to a few words).
Signed-off-by: Randy Dunlap <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|