| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/[email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
RT_TOS() from include/uapi/linux/in_route.h is defined using
IPTOS_TOS_MASK from include/uapi/linux/ip.h. This is problematic for
files such as include/net/ip_fib.h that want to use RT_TOS() as without
including both header files kernel compilation fails:
In file included from ./include/net/ip_fib.h:25,
from ./include/net/route.h:27,
from ./include/net/lwtunnel.h:9,
from net/core/dst.c:24:
./include/net/ip_fib.h: In function ‘fib_dscp_masked_match’:
./include/uapi/linux/in_route.h:31:32: error: ‘IPTOS_TOS_MASK’ undeclared (first use in this function)
31 | #define RT_TOS(tos) ((tos)&IPTOS_TOS_MASK)
| ^~~~~~~~~~~~~~
./include/net/ip_fib.h:440:45: note: in expansion of macro ‘RT_TOS’
440 | return dscp == inet_dsfield_to_dscp(RT_TOS(fl4->flowi4_tos));
Therefore, cited commit changed linux/in_route.h to include linux/ip.h.
However, as reported by David, this breaks iproute2 compilation due
overlapping definitions between linux/ip.h and
/usr/include/netinet/ip.h:
In file included from ../include/uapi/linux/in_route.h:5,
from iproute.c:19:
../include/uapi/linux/ip.h:25:9: warning: "IPTOS_TOS" redefined
25 | #define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
| ^~~~~~~~~
In file included from iproute.c:17:
/usr/include/netinet/ip.h:222:9: note: this is the location of the previous definition
222 | #define IPTOS_TOS(tos) ((tos) & IPTOS_TOS_MASK)
Fix by changing include/net/ip_fib.h to include linux/ip.h. Note that
usage of RT_TOS() should not spread further in the kernel due to recent
work in this area.
Fixes: 1fa3314c14c6 ("ipv4: Centralize TOS matching")
Reported-by: David Ahern <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Guillaume Nault <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The mana_set_channels() function requires detaching the mana
driver and reattaching it with changed channel values.
During this operation if the system is low on memory, the reattach
might fail, causing the network device being down.
To avoid this we pre-allocate buffers at the beginning of set operation,
to prevent complete network loss
Signed-off-by: Shradha Gupta <[email protected]>
Reviewed-by: Gerhard Engleder <[email protected]>
Reviewed-by: Haiyang Zhang <[email protected]>
Link: https://patch.msgid.link/1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Native PCIe Enclosure Management (NPEM, PCIe r6.1 sec 6.28) allows managing
LEDs in storage enclosures. NPEM is indication oriented and it does not
give direct access to LEDs. Although each indication *could* represent an
individual LED, multiple indications could also be represented as a single,
multi-color LED or a single LED blinking in a specific interval. The
specification leaves that open.
Each enabled indication (capability register bit on) is represented as a
ledclass_dev which can be controlled through sysfs. For every ledclass
device only 2 brightness states are allowed: LED_ON (1) or LED_OFF (0).
This corresponds to the NPEM control register (Indication bit on/off).
Ledclass devices appear in sysfs as child devices (subdirectory) of PCI
device which has an NPEM Extended Capability and indication is enabled in
NPEM capability register. For example, these are LEDs created for pcieport
"10000:02:05.0" on my setup:
leds/
├── 10000:02:05.0:enclosure:fail
├── 10000:02:05.0:enclosure:locate
├── 10000:02:05.0:enclosure:ok
└── 10000:02:05.0:enclosure:rebuild
They can be also found in "/sys/class/leds" directory. The parent PCIe
device domain/bus/device/function address is used to guarantee uniqueness
across leds subsystem.
To enable/disable a "fail" indication, the "brightness" file can be edited:
echo 1 > ./leds/10000:02:05.0:enclosure:fail/brightness
echo 0 > ./leds/10000:02:05.0:enclosure:fail/brightness
PCIe r6.1, sec 7.9.19.2 defines the possible indications.
Multiple indications for same parent PCIe device can conflict and hardware
may update them when processing new request. To avoid issues, driver
refresh all indications by reading back control register.
This driver expects to be the exclusive NPEM extended capability manager.
It waits up to 1 second after imposing new request, it doesn't verify if
controller is busy before write, and it assumes the mutex lock gives
protection from concurrent updates.
If _DSM LED management is available, we assume the platform may be using
NPEM for its own purposes (see PCI Firmware Spec r3.3 sec 4.7), so the
driver does not use NPEM. A future patch will add _DSM support; an info
message notes whether NPEM or _DSM is being used.
NPEM is a PCIe extended capability so it should be registered in
pcie_init_capabilities() but it is not possible due to LED dependency. The
parent pci_device must be added earlier for led_classdev_register() to be
successful. NPEM does not require configuration on kernel side, so it is
safe to register LED devices later.
Link: https://lore.kernel.org/r/[email protected]
Suggested-by: Lukas Wunner <[email protected]>
Signed-off-by: Mariusz Tkaczyk <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Tested-by: Stuart Hayes <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
|
|
Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterator patchset.
Signed-off-by: Tejun Heo <[email protected]>
|
|
Add sched_ext_ops operations to init/exit cgroups, and track task migrations
and config changes. A BPF scheduler may not implement or implement only
subset of cgroup features. The implemented features can be indicated using
%SCX_OPS_HAS_CGOUP_* flags. If cgroup configuration makes use of features
that are not implemented, a warning is triggered.
While a BPF scheduler is being enabled and disabled, relevant cgroup
operations are locked out using scx_cgroup_rwsem. This avoids situations
like task prep taking place while the task is being moved across cgroups,
making things easier for BPF schedulers.
v7: - cgroup interface file visibility toggling is dropped in favor just
warning messages. Dynamically changing interface visiblity caused more
confusion than helping.
v6: - Updated to reflect the removal of SCX_KF_SLEEPABLE.
- Updated to use CONFIG_GROUP_SCHED_WEIGHT and fixes for
!CONFIG_FAIR_GROUP_SCHED && CONFIG_EXT_GROUP_SCHED.
v5: - Flipped the locking order between scx_cgroup_rwsem and
cpus_read_lock() to avoid locking order conflict w/ cpuset. Better
documentation around locking.
- sched_move_task() takes an early exit if the source and destination
are identical. This triggered the warning in scx_cgroup_can_attach()
as it left p->scx.cgrp_moving_from uncleared. Updated the cgroup
migration path so that ops.cgroup_prep_move() is skipped for identity
migrations so that its invocations always match ops.cgroup_move()
one-to-one.
v4: - Example schedulers moved into their own patches.
- Fix build failure when !CONFIG_CGROUP_SCHED, reported by Andrea Righi.
v3: - Make scx_example_pair switch all tasks by default.
- Convert to BPF inline iterators.
- scx_bpf_task_cgroup() is added to determine the current cgroup from
CPU controller's POV. This allows BPF schedulers to accurately track
CPU cgroup membership.
- scx_example_flatcg added. This demonstrates flattened hierarchy
implementation of CPU cgroup control and shows significant performance
improvement when cgroups which are nested multiple levels are under
competition.
v2: - Build fixes for different CONFIG combinations.
Signed-off-by: Tejun Heo <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Acked-by: Josh Don <[email protected]>
Acked-by: Hao Luo <[email protected]>
Acked-by: Barret Rhoden <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Andrea Righi <[email protected]>
|
|
During scx_ops_enable(), SCX needs to invoke the sleepable ops.init_task()
on every task. To do this, it does get_task_struct() on each iterated task,
drop the lock and then call ops.init_task().
However, a TASK_DEAD task may already have lost all its usage count and be
waiting for RCU grace period to be freed. If get_task_struct() is called on
such task, use-after-free can happen. To avoid such situations,
scx_ops_enable() skips initialization of TASK_DEAD tasks, which seems safe
as they are never going to be scheduled again.
Unfortunately, a racing sched_setscheduler(2) can grab the task before the
task is unhashed and then continue to e.g. move the task from RT to SCX
after TASK_DEAD is set and ops_enable skipped the task. As the task hasn't
gone through scx_ops_init_task(), scx_ops_enable_task() called from
switching_to_scx() triggers the following warning:
sched_ext: Invalid task state transition 0 -> 3 for stress-ng-race-[2872]
WARNING: CPU: 6 PID: 2367 at kernel/sched/ext.c:3327 scx_ops_enable_task+0x18f/0x1f0
...
RIP: 0010:scx_ops_enable_task+0x18f/0x1f0
...
switching_to_scx+0x13/0xa0
__sched_setscheduler+0x84e/0xa50
do_sched_setscheduler+0x104/0x1c0
__x64_sys_sched_setscheduler+0x18/0x30
do_syscall_64+0x7b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
As in the ops_disable path, it just doesn't seem like a good idea to leave
any task in an inconsistent state, even when the task is dead. The root
cause is ops_enable not being able to tell reliably whether a task is truly
dead (no one else is looking at it and it's about to be freed) and was
testing TASK_DEAD instead. Fix it by testing the task's usage count
directly.
- ops_init no longer ignores TASK_DEAD tasks. As now all users iterate all
tasks, @include_dead is removed from scx_task_iter_next_locked() along
with dead task filtering.
- tryget_task_struct() is added. Tasks are skipped iff tryget_task_struct()
fails.
Signed-off-by: Tejun Heo <[email protected]>
Cc: David Vernet <[email protected]>
Cc: Peter Zijlstra <[email protected]>
|
|
This patch removes the insn_buf array stack usage from the
inline_bpf_loop(). Instead, the env->insn_buf is used. The
usage in inline_bpf_loop() needs more than 16 insn, so the
INSN_BUF_SIZE needs to be increased from 16 to 32.
The compiler stack size warning on the verifier is gone
after this change.
Cc: Eduard Zingerman <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply into extcon-next
Immutable branch for usb_types change for v6.12
Changing usb_types type from array to bitmap in the power_supply_desc
struct requires updating power-supply drivers living in different
subsystem, so it is handled via an immutable branch.
|
|
Add arch hooks that are invoked when KVM enables/disable virtualization.
x86 will use the hooks to register an "emergency disable" callback, which
is essentially an x86-specific shutdown notifier that is used when the
kernel is doing an emergency reboot/shutdown/kexec.
Add comments for the declarations to help arch code understand exactly
when the callbacks are invoked. Alternatively, the APIs themselves could
communicate most of the same info, but kvm_arch_pre_enable_virtualization()
and kvm_arch_post_disable_virtualization() are a bit cumbersome, and make
it a bit less obvious that they are intended to be implemented as a pair.
Reviewed-by: Chao Gao <[email protected]>
Reviewed-by: Kai Huang <[email protected]>
Acked-by: Kai Huang <[email protected]>
Tested-by: Farrah Chen <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Rename the per-CPU hooks used to enable virtualization in hardware to
align with the KVM-wide helpers in kvm_main.c, and to better capture that
the callbacks are invoked on every online CPU.
No functional change intended.
Suggested-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Kai Huang <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Now we have everything in place and we can allow idmapped mounts
by setting the FS_ALLOW_IDMAP flag. Notice that real availability
of idmapped mounts will depend on the fuse daemon. Fuse daemon
have to set FUSE_ALLOW_IDMAP flag in the FUSE_INIT reply.
To discuss:
- we enable idmapped mounts support only if "default_permissions" mode is
enabled, because otherwise we would need to deal with UID/GID mappings in
the userspace side OR provide the userspace with idmapped
req->in.h.uid/req->in.h.gid values which is not something that we probably
want to. Idmapped mounts philosophy is not about faking caller uid/gid.
Some extra links and examples:
- libfuse support
https://github.com/mihalicyn/libfuse/commits/idmap_support
- fuse-overlayfs support:
https://github.com/mihalicyn/fuse-overlayfs/commits/idmap_support
- cephfs-fuse conversion example
https://github.com/mihalicyn/ceph/commits/fuse_idmap
- glusterfs conversion example
https://github.com/mihalicyn/glusterfs/commits/fuse_idmap
Signed-off-by: Alexander Mikhalitsyn <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
Add some preparational changes in fuse_get_req/fuse_force_creds
to handle idmappings.
Miklos suggested [1], [2] to change the meaning of in.h.uid/in.h.gid
fields when daemon declares support for idmapped mounts. In a new semantic,
we fill uid/gid values in fuse header with a id-mapped caller uid/gid (for
requests which create new inodes), for all the rest cases we just send -1
to userspace.
No functional changes intended.
Link: https://lore.kernel.org/all/CAJfpegsVY97_5mHSc06mSw79FehFWtoXT=hhTUK_E-Yhr7OAuQ@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAJfpegtHQsEUuFq1k4ZbTD3E1h-GsrN3PWyv7X8cg6sfU_W2Yw@mail.gmail.com/ [2]
Signed-off-by: Alexander Mikhalitsyn <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
Right now we determine if filesystem support vfs idmappings or not basing
on the FS_ALLOW_IDMAP flag presence. This "static" way works perfecly well
for local filesystems like ext4, xfs, btrfs, etc. But for network-like
filesystems like fuse, cephfs this approach is not ideal, because sometimes
proper support of vfs idmaps requires some extensions for the on-wire
protocol, which implies that changes have to be made not only in the Linux
kernel code but also in the 3rd party components like libfuse, cephfs MDS
server and so on.
We have seen that issue during our work on cephfs idmapped mounts [1] with
Christian, but right now I'm working on the idmapped mounts support for
fuse/virtiofs and I think that it is a right time for this extension.
[1] 5ccd8530dd7 ("ceph: handle idmapped mounts in create_request_message()")
Suggested-by: Christian Brauner <[email protected]>
Signed-off-by: Alexander Mikhalitsyn <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
As of today, KVM notes a quiescent state only in guest entry, which is good
as it avoids the guest being interrupted for current RCU operations.
While the guest vcpu runs, it can be interrupted by a timer IRQ that will
check for any RCU operations waiting for this CPU. In case there are any of
such, it invokes rcu_core() in order to sched-out the current thread and
note a quiescent state.
This occasional schedule work will introduce tens of microsseconds of
latency, which is really bad for vcpus running latency-sensitive
applications, such as real-time workloads.
So, note a quiescent state in guest exit, so the interrupted guests is able
to deal with any pending RCU operations before being required to invoke
rcu_core(), and thus avoid the overhead of related scheduler work.
Signed-off-by: Leonardo Bras <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Acked-by: Sean Christopherson <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the amba_bustype variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Kunwu Chan <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
An emergency or panic context can takeover console ownership
while the current owner was printing a printk message. The
atomic printer will re-print the message that the previous
owner was printing. However, this can look confusing to the
user and may even seem as though a message was lost.
[3430014.1
[3430014.181123] usb 1-2: Product: USB Audio
Add a new field @nbcon_prev_seq to struct console to track
the sequence number to print that was assigned to the previous
console owner. If this matches the sequence number to print
that the current owner is assigned, then a takeover must have
occurred. In this case, print an additional message to inform
the user that the previous message is being printed again.
[3430014.1
** replaying previous printk message **
[3430014.181123] usb 1-2: Product: USB Audio
Signed-off-by: John Ogness <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>
|
|
Provide the main implementation for running a printer kthread
per nbcon console that is takeover/handover aware. This
includes:
- new mandatory write_thread() callback
- kthread creation
- kthread main printing loop
- kthread wakeup mechanism
- kthread shutdown
kthread creation is a bit tricky because consoles may register
before kthreads can be created. In such cases, registration
will succeed, even though no kthread exists. Once kthreads can
be created, an early_initcall will set @printk_kthreads_ready.
If there are no registered boot consoles, the early_initcall
creates the kthreads for all registered nbcon consoles. If
kthread creation fails, the related console is unregistered.
If there are registered boot consoles when
@printk_kthreads_ready is set, no kthreads are created until
the final boot console unregisters.
Once kthread creation finally occurs, @printk_kthreads_running
is set so that the system knows kthreads are available for all
registered nbcon consoles.
If @printk_kthreads_running is already set when the console
is registering, the kthread is created during registration. If
kthread creation fails, the registration will fail.
Until @printk_kthreads_running is set, console printing occurs
directly via the console_lock.
kthread shutdown on system shutdown/reboot is necessary to
ensure the printer kthreads finish their printing so that the
system can cleanly transition back to direct printing via the
console_lock in order to reliably push out the final
shutdown/reboot messages. @printk_kthreads_running is cleared
before shutting down the individual kthreads.
The kthread uses a new mandatory write_thread() callback that
is called with both device_lock() and the console context
acquired.
The console ownership handling is necessary for synchronization
against write_atomic() which is synchronized only via the
console context ownership.
The device_lock() serializes acquiring the console context with
NBCON_PRIO_NORMAL. It is needed in case the device_lock() does
not disable preemption. It prevents the following race:
CPU0 CPU1
[ task A ]
nbcon_context_try_acquire()
# success with NORMAL prio
# .unsafe == false; // safe for takeover
[ schedule: task A -> B ]
WARN_ON()
nbcon_atomic_flush_pending()
nbcon_context_try_acquire()
# success with EMERGENCY prio
# flushing
nbcon_context_release()
# HERE: con->nbcon_state is free
# to take by anyone !!!
nbcon_context_try_acquire()
# success with NORMAL prio [ task B ]
[ schedule: task B -> A ]
nbcon_enter_unsafe()
nbcon_context_can_proceed()
BUG: nbcon_context_can_proceed() returns "true" because
the console is owned by a context on CPU0 with
NBCON_PRIO_NORMAL.
But it should return "false". The console is owned
by a context from task B and we do the check
in a context from task A.
Note that with these changes, the printer kthreads do not yet
take over full responsibility for nbcon printing during normal
operation. These changes only focus on the lifecycle of the
kthreads.
Co-developed-by: John Ogness <[email protected]>
Signed-off-by: John Ogness <[email protected]>
Signed-off-by: Thomas Gleixner (Intel) <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>
|
|
Since ownership can be lost at any time due to handover or
takeover, a printing context _must_ be prepared to back out
immediately and carefully. However, there are scenarios where
the printing context must reacquire ownership in order to
finalize or revert hardware changes.
One such example is when interrupts are disabled during
printing. No other context will automagically re-enable the
interrupts. For this case, the disabling context _must_
reacquire nbcon ownership so that it can re-enable the
interrupts.
Provide nbcon_reacquire_nobuf() for exactly this purpose. It
allows a printing context to reacquire ownership using the same
priority as its previous ownership.
Note that after a successful reacquire the printing context
will have no output buffer because that has been lost. This
function cannot be used to resume printing.
Signed-off-by: John Ogness <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>
|
|
isochronous contexts
In the previous commit, the workqueue is added per the instance of fw_card
structure for isochronous contexts. The workqueue is designed to be used by
the implementation of fw_card_driver structure underlying the fw_card.
This commit adds some local APIs to be used by the implementation.
Tested-by: Edmund Raile <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
This commit adds a workqueue dedicated for isochronous context processing.
The workqueue is allocated per instance of fw_card structure to satisfy the
following characteristics descending from 1394 OHCI specification:
In 1394 OHCI specification, memory pages are reserved to each isochronous
context dedicated to DMA transmission. It allows to operate these
per-context pages concurrently. Software can schedule hardware interrupt
for several isochronous context to the same cycle, thus WQ_UNBOUND is
specified. Additionally, it is sleepable to operate the content of pages,
thus WQ_BH is not used.
The isochronous context delivers the packets with time stamp, thus
WQ_HIGHPRI is specified for semi real-time data such as IEC 61883-1/6
protocol implemented by ALSA firewire stack. The isochronous context is not
used by the implementation of SCSI over IEEE1394 protocol (sbp2), thus
WQ_MEM_RECLAIM is not specified.
It is useful for users to adjust cpu affinity of the workqueue depending
on their work loads, thus WQ_SYS is specified to expose the attributes to
user space.
Tested-by: Edmund Raile <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
Add a regset for POE containing POR_EL0.
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Reviewed-by: Anshuman Khandual <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
VM_PKEY_BIT[012] will use VM_HIGH_ARCH_[012], move the MTE VM flags to
accommodate this.
Signed-off-by: Joey Gouly <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Use the new CONFIG_ARCH_PKEY_BITS to simplify setting these bits
for different architectures.
Signed-off-by: Joey Gouly <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Acked-by: Dave Hansen <[email protected]>
Reviewed-by: Anshuman Khandual <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Currently napi_disable() gets called during rxq and txq cleanup,
even before napi is enabled and hrtimer is initialized. It causes
kernel panic.
? page_fault_oops+0x136/0x2b0
? page_counter_cancel+0x2e/0x80
? do_user_addr_fault+0x2f2/0x640
? refill_obj_stock+0xc4/0x110
? exc_page_fault+0x71/0x160
? asm_exc_page_fault+0x27/0x30
? __mmdrop+0x10/0x180
? __mmdrop+0xec/0x180
? hrtimer_active+0xd/0x50
hrtimer_try_to_cancel+0x2c/0xf0
hrtimer_cancel+0x15/0x30
napi_disable+0x65/0x90
mana_destroy_rxq+0x4c/0x2f0
mana_create_rxq.isra.0+0x56c/0x6d0
? mana_uncfg_vport+0x50/0x50
mana_alloc_queues+0x21b/0x320
? skb_dequeue+0x5f/0x80
Cc: [email protected]
Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Souradeep Chakrabarti <[email protected]>
Reviewed-by: Haiyang Zhang <[email protected]>
Reviewed-by: Shradha Gupta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We already have memory in the union here that is being wasted in AMD's
case, use it to store the nid.
Putting the nid here further isolates the io_pgtable code from the struct
protection_domain.
Fixup protection_domain_alloc so that the NID from the device is provided,
at this point dev is never NULL for AMD so this will now allocate the
first table pointer on the correct NUMA node.
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Vasant Hegde <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
SCX_TASK_BAL_KEEP is used by balance_one() to tell pick_next_task_scx() to
keep running the current task. It's not really a task property. Replace it
with SCX_RQ_BAL_KEEP which resides in rq->scx.flags and is a better fit for
the usage. Also, the existing clearing rule is unnecessarily strict and
makes it difficult to use with core-sched. Just clear it on entry to
balance_one().
Signed-off-by: Tejun Heo <[email protected]>
|
|
There are no more any board files that use the platform data for
gpio-davinci. We can remove the header defining it and port the code to
no longer store any context in pdata.
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Add isolate_folio_to_list() helper to try to isolate HugeTLB, no-LRU
movable and LRU folios to a list, which will be reused by
do_migrate_range() from memory hotplug soon, also drop the
mf_isolate_folio() since we could directly use new helper in the
soft_offline_in_use_page().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Acked-by: Miaohe Lin <[email protected]>
Tested-by: Miaohe Lin <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Oscar Salvador <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The do_vma_munmap() wrapper existed for callers that didn't have a vma
iterator and needed to check the vma mseal status prior to calling the
underlying munmap(). All callers now use a vma iterator and since the
mseal check has been moved to do_vmi_align_munmap() and the vmas are
aligned, this function can just be called instead.
do_vmi_align_munmap() can no longer be static as ipc/shm is using it and
it is exported via the mm.h header.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Reviewed-by: Lorenzo Stoakes <[email protected]>
Cc: Bert Karwatzki <[email protected]>
Cc: Jeff Xu <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Paul Moore <[email protected]>
Cc: Sidhartha Kumar <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm: store zero pages to be swapped out in a bitmap", v8.
As shown in the patch series that introduced the zswap same-filled
optimization [1], 10-20% of the pages stored in zswap are same-filled.
This is also observed across Meta's server fleet. By using VM counters in
swap_writepage (not included in this patchseries) it was found that less
than 1% of the same-filled pages to be swapped out are non-zero pages.
For conventional swap setup (without zswap), rather than reading/writing
these pages to flash resulting in increased I/O and flash wear, a bitmap
can be used to mark these pages as zero at write time, and the pages can
be filled at read time if the bit corresponding to the page is set.
When using zswap with swap, this also means that a zswap_entry does not
need to be allocated for zero filled pages resulting in memory savings
which would offset the memory used for the bitmap.
A similar attempt was made earlier in [2] where zswap would only track
zero-filled pages instead of same-filled. This patchseries adds
zero-filled pages optimization to swap (hence it can be used even if zswap
is disabled) and removes the same-filled code from zswap (as only 1% of
the same-filled pages are non-zero), simplifying code.
[1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/
[2] https://lore.kernel.org/lkml/[email protected]/
This patch (of 2):
Approximately 10-20% of pages to be swapped out are zero pages [1].
Rather than reading/writing these pages to flash resulting
in increased I/O and flash wear, a bitmap can be used to mark these
pages as zero at write time, and the pages can be filled at
read time if the bit corresponding to the page is set.
With this patch, NVMe writes in Meta server fleet decreased
by almost 10% with conventional swap setup (zswap disabled).
[1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Usama Arif <[email protected]>
Reviewed-by: Chengming Zhou <[email protected]>
Reviewed-by: Yosry Ahmed <[email protected]>
Reviewed-by: Nhat Pham <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Usama Arif <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Convert x86 to use PG_arch_2 instead of PG_uncached and remove
PG_uncached.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This flag has similar constraints to PG_owner_priv_1 -- it is ignored by
core code, and is entirely for the use of the code which allocated the
folio. Since the pagecache does not use it, individual filesystems can
use it. The bufferhead code does use it, so filesystems which use the
buffer cache must not use it for another purpose.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This function has no more callers, except folio_has_private(). Combine
the two functions.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
While there are many aliases for this flag, nobody actually uses the
*PageOwnerPriv1() nor folio_*_owner_priv_1() accessors. Remove them.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This flag is now only used on folios, so we can remove all the page
accessors.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There is only one caller of PageUnevictable() left; convert it to call
folio_test_unevictable() and remove all the page accessors.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This flag is now only used on folios, so we can remove all the page
accessors and reword the comments that refer to them.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This flag is now only used on folios, so we can remove all the page
accessors.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This flag is now only used on folios, so we can remove all the page
accessors.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "Simplify the page flags a little".
In the course of our folio conversions, we have made many page flags only
used on folios, so we can now remove the page-based accessors. This
should cut down compile time a little, and prevent new users from cropping
up.
There is more that could be done in this area, but it would produce merge
conflicts, so I'll sit on those patches until next merge window. We now
have line of sight to removing PG_private_2 and PG_private.
This patch (of 10):
This flag is now only used on folios, so we can remove all the page
accessors.
[[email protected]: fix arch/powerpc/mm/pgtable-frag.c]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
By using a few values in the top byte, users of page_type can store up to
24 bits of additional data in page_type. It also reduces the code size as
(with replacement of READ_ONCE() with data_race()), the kernel can check
just a single byte. eg:
ffffffff811e3a79: 8b 47 30 mov 0x30(%rdi),%eax
ffffffff811e3a7c: 55 push %rbp
ffffffff811e3a7d: 48 89 e5 mov %rsp,%rbp
ffffffff811e3a80: 25 00 00 00 82 and $0x82000000,%eax
ffffffff811e3a85: 3d 00 00 00 80 cmp $0x80000000,%eax
ffffffff811e3a8a: 74 4d je ffffffff811e3ad9 <folio_mapping+0x69>
becomes:
ffffffff811e3a69: 80 7f 33 f5 cmpb $0xf5,0x33(%rdi)
ffffffff811e3a6d: 55 push %rbp
ffffffff811e3a6e: 48 89 e5 mov %rsp,%rbp
ffffffff811e3a71: 74 4d je ffffffff811e3ac0 <folio_mapping+0x60>
replacing three instructions with one.
[[email protected]: fix ubsan warnings]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Kent Overstreet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Resolve the awkward "and add one to this opaque constant" test into a
self-documenting inline function.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Kent Overstreet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "Increase the number of bits available in page_type".
Kent wants more than 16 bits in page_type, so I resurrected this old patch
and expanded it a bit. It's a bit more efficient than our current scheme
(1 4-byte insn vs 3 insns of 13 bytes total) to test a single page type.
This patch (of 4):
An upcoming patch will convert page type from being a bitfield to a
single byte, so we will not be able to use %pG to print the page type
any more. The printing of the symbolic name will be restored in that
patch.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Kent Overstreet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Readahead support for IOCB_NOWAIT was introduced in commit 2e85abf053b9
("mm: allow read-ahead with IOCB_NOWAIT set"). However, this
implementation broke the semantics of IOCB_NOWAIT by potentially causing
it to wait on I/O during memory reclamation. This behavior was later
modified in commit efa8480a8316 ("fs: RWF_NOWAIT should imply IOCB_NOIO").
To resolve the blocking issue during memory reclamation, we can use
memalloc_noio_{save,restore} to ensure non-blocking behavior. This change
restores the original functionality, allowing preadv2(IOCB_NOWAIT) to
trigger readahead if the file content is not present in the page cache.
While this process may trigger direct memory reclamation, the
__GFP_NORETRY flag is set in the readahead GFP flags, ensuring it won't
block.
A use case for this change is when we want to trigger readahead in the
preadv2(2) syscall if the file cache is absent, but without waiting for
certain filesystem locks, like xfs_ilock. A simple example is as follows:
retry:
if (preadv2(fd, iovec, cnt, offset, RWF_NOWAIT) < 0) {
do_other_work();
goto retry;
}
Link: https://lore.gnuweeb.org/io-uring/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yafang Shao <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Christian Brauner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
We already force-inline page_fixed_fake_head(), page_is_fake_head() and
PageTail(), however the compiler might decide that _compound_head() is not
worthy to be inlined, because of page_fixed_fake_head().
The result is that, for example, PageAnonExclusive() now might involve a
function call when checking PageHuge(), which performs a
page_folio()->_compound_head() call. This can lead to a slight regression
of the stress-ng.clone benchmark.
This is not super-urgent to fix, but always inlining _compound_head()
seems like the obvious thing to do for this primitive, similar to the
other ones.
This change restores the slight regression and a compilation with
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y shows no relevant bloat [2]:
add/remove: 15/14 grow/shrink: 79/87 up/down: 12836/-13917 (-1081)
...
Total: Before=32786363, After=32785282, chg -0.00%
[1] https://lkml.kernel.org/r/[email protected]
[2] https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c0bff412e67b ("mm: allow anon exclusive check over hugetlb tail pages")
Signed-off-by: David Hildenbrand <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Tested-by: Yin Fengwei <[email protected]>
Cc: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add ERR_PTR_PCPU(), PTR_ERR_PCPU() and IS_ERR_PCPU() macros that operate
on pointers in the percpu address space.
These macros remove the need for (__force void *) function argument casts
(to avoid sparse -Wcast-from-as warnings).
The patch will also avoid future build errors due to pointer address space
mismatch with enabled strict percpu address space checks.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Uros Bizjak <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Properly document that if __GFP_ZERO logic is requested, callers must
ensure that, starting with the initial memory allocation, every subsequent
call to this API for the same memory allocation is flagged with
__GFP_ZERO. Otherwise, it is possible that __GFP_ZERO is not fully
honored by this API.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Danilo Krummrich <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
We have some cases left whereby we operate on small folios and still refer
to page->_mapcount. Let's just use folio->_mapcount instead, which
currently still overlays page->_mapcount, so no change.
This change will make it easier to later spot any remaining users of
page->_mapcount that target tail pages.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Use __GFP_COMP for gigantic folios to greatly reduce not only the amount
of code but also the allocation and free time.
LOC (approximately): +60, -240
Allocate and free 500 1GB hugeTLB memory without HVO by:
time echo 500 >/sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
time echo 0 >/sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
Before After
Alloc ~13s ~10s
Free ~15s <1s
The above magnitude generally holds for multiple x86 and arm64 CPU models.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yu Zhao <[email protected]>
Reported-by: Frank van der Linden <[email protected]>
Acked-by: Zi Yan <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|