| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Its last user has been removed in commit f2aedb713c28 ("NFS: Add
fs_context support.").
Signed-off-by: Ondrej Mosnacek <[email protected]>
Reviewed-by: Casey Schaufler <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Documentation fix for v5.17.
A fix for bitrot in the documentation for protection interrupts that
crept in as the code was revised during review"
* tag 'regulator-fix-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Update protection IRQ helper docs
|
|
Backmerge drm-next to pull in:
8f59ee9a570c ("drm/msm/dsi: Adjust probe order")
Signed-off-by: Rob Clark <[email protected]>
|
|
Add definitions for the VIRTIO_IOMMU_F_BYPASS_CONFIG, which supersedes
VIRTIO_IOMMU_F_BYPASS.
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
In case of an iommu page fault, the faulting iova is logged
in trace_io_page_fault. It is therefore convenient to log
the iova range in mapping/unmapping trace events so that it
is easier to see if the faulting iova was recently in any of
those ranges.
Signed-off-by: Dafna Hirschfeld <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
We need the tty/serial driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit b00ced38e317 ("ARM: ixp4xx: Delete Avila boardfiles") removed the
last use of <linux/platform_data/pata_ixp4xx_cf.h> but left the header file
in place. Nothing uses this file, delete it now.
Cc: Linus Walleij <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Properly init uclamp_flags of a runqueue, on first enqueuing
- Fix preempt= callback return values
- Correct utime/stime resource usage reporting on nohz_full to return
the proper times instead of shorter ones
* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
preempt/dynamic: Fix setup_preempt_mode() return value
sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
|
|
In previous patches we added new and modified existing helpers to handle
idmapped mounts of filesystems mounted with an idmapping. In this final
patch we convert all relevant places in the vfs to actually pass the
filesystem's idmapping into these helpers.
With this the vfs is in shape to handle idmapped mounts of filesystems
mounted with an idmapping. Note that this is just the generic
infrastructure. Actually adding support for idmapped mounts to a
filesystem mountable with an idmapping is follow-up work.
In this patch we extend the definition of an idmapped mount from a mount
that that has the initial idmapping attached to it to a mount that has
an idmapping attached to it which is not the same as the idmapping the
filesystem was mounted with.
As before we do not allow the initial idmapping to be attached to a
mount. In addition this patch prevents that the idmapping the filesystem
was mounted with can be attached to a mount created based on this
filesystem.
This has multiple reasons and advantages. First, attaching the initial
idmapping or the filesystem's idmapping doesn't make much sense as in
both cases the values of the i_{g,u}id and other places where k{g,u}ids
are used do not change. Second, a user that really wants to do this for
whatever reason can just create a separate dedicated identical idmapping
to attach to the mount. Third, we can continue to use the initial
idmapping as an indicator that a mount is not idmapped allowing us to
continue to keep passing the initial idmapping into the mapping helpers
to tell them that something isn't an idmapped mount even if the
filesystem is mounted with an idmapping.
Link: https://lore.kernel.org/r/[email protected] (v1)
Link: https://lore.kernel.org/r/[email protected] (v2)
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Since we'll be passing the filesystem's idmapping in even more places in
the following patches and we do already dereference struct inode to get
to the filesystem's idmapping multiple times add a tiny helper.
Link: https://lore.kernel.org/r/[email protected] (v1)
Link: https://lore.kernel.org/r/[email protected] (v2)
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Amir Goldstein <[email protected]>
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Enable the mapped_fs{g,u}id() helpers to support filesystems mounted
with an idmapping. Apart from core mapping helpers that use
mapped_fs{g,u}id() to initialize struct inode's i_{g,u}id fields xfs is
the only place that uses these low-level helpers directly.
The patch only extends the helpers to be able to take the filesystem
idmapping into account. Since we don't actually yet pass the
filesystem's idmapping in no functional changes happen. This will happen
in a final patch.
Link: https://lore.kernel.org/r/[email protected] (v1)
Link: https://lore.kernel.org/r/[email protected] (v2)
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Amir Goldstein <[email protected]>
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Now that we ported all places to use the new low-level mapping helpers
that are able to support filesystems mounted with an idmapping we can
remove the old low-level mapping helpers. With the removal of these old
helpers we also conclude the renaming of the mapping helpers we started
in commit a65e58e791a1 ("fs: document and rename fsid helpers").
Link: https://lore.kernel.org/r/[email protected] (v1)
Link: https://lore.kernel.org/r/[email protected] (v2)
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Amir Goldstein <[email protected]>
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.17
- Add generic support for output impedance,
- Add drive strength and output impedance support for the RZ/G2L SoC,
- Miscellaneous fixes and improvements.
|
|
No driver is left using the external pgmap refcount, so remove the
code to support it.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Pass in the original position and count rather than the position and
count that were updated by the write. Also use the correct types for
all arguments, in particular the file offset which was being truncated
to 32 bits on 32-bit platforms.
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
|
|
BPF_LOG_KERNEL is only used internally, so disallow bpf_btf_load()
to set log level as BPF_LOG_KERNEL. The same checking has already
been done in bpf_check(), so factor out a helper to check the
validity of log attributes and use it in both places.
Fixes: 8580ac9404f6 ("bpf: Process in-kernel BTF")
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The DAX device <-> block device association is only enabled if
CONFIG_BLOCK is enabled. Update dax.h to account for that and use
the right conditions for the fs_put_dax stub as well.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Prepare for the removal of the block_device from the DAX I/O path by
returning the partition offset from fs_dax_get_by_bdev so that the file
systems have it at hand for use during I/O.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Add a flag so that the file system can easily detect DAX operations
based just on the iomap operation requested instead of looking at
inode state using IS_DAX. This will be needed to apply the to be
added partition offset only for operations that actually use DAX,
but not things like fiemap that are based on the block device.
In the long run it should also allow turning the bdev, dax_dev
and inline_data into a union.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Unshare the DAX and iomap buffered I/O page zeroing code. This code
previously did a IS_DAX check deep inside the iomap code, which in
fact was the only DAX check in the code. Instead move these checks
into the callers. Most callers already have DAX special casing anyway
and XFS will need it for reflink support as well.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Replace the two steps of dax_iomap_sector and bdev_dax_pgoff with a
single dax_iomap_pgoff helper that avoids lots of cumbersome sector
conversions.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Just open code the block size and dax_dev == NULL checks in the callers.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Mike Snitzer <[email protected]>
Reviewed-by: Gao Xiang <[email protected]> [erofs]
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Replace the dax_host_hash with an xarray indexed by the pointer value
of the gendisk, and require explicitly calls from the block drivers that
want to associate their gendisk with a dax_device.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Mike Snitzer <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
One of the more frequent data races reported by KCSAN is the racy read
in mutex_spin_on_owner(), which is usually reported as "race of unknown
origin" without showing the writer. This is due to the racing write
occurring in kernel/sched. Locally enabling KCSAN in kernel/sched shows:
| write (marked) to 0xffff97f205079934 of 4 bytes by task 316 on cpu 6:
| finish_task kernel/sched/core.c:4632 [inline]
| finish_task_switch kernel/sched/core.c:4848
| context_switch kernel/sched/core.c:4975 [inline]
| __schedule kernel/sched/core.c:6253
| schedule kernel/sched/core.c:6326
| schedule_preempt_disabled kernel/sched/core.c:6385
| __mutex_lock_common kernel/locking/mutex.c:680
| __mutex_lock kernel/locking/mutex.c:740 [inline]
| __mutex_lock_slowpath kernel/locking/mutex.c:1028
| mutex_lock kernel/locking/mutex.c:283
| tty_open_by_driver drivers/tty/tty_io.c:2062 [inline]
| ...
|
| read to 0xffff97f205079934 of 4 bytes by task 322 on cpu 3:
| mutex_spin_on_owner kernel/locking/mutex.c:370
| mutex_optimistic_spin kernel/locking/mutex.c:480
| __mutex_lock_common kernel/locking/mutex.c:610
| __mutex_lock kernel/locking/mutex.c:740 [inline]
| __mutex_lock_slowpath kernel/locking/mutex.c:1028
| mutex_lock kernel/locking/mutex.c:283
| tty_open_by_driver drivers/tty/tty_io.c:2062 [inline]
| ...
|
| value changed: 0x00000001 -> 0x00000000
This race is clearly intentional, and the potential for miscompilation
is slim due to surrounding barrier() and cpu_relax(), and the value
being used as a boolean.
Nevertheless, marking this reader would more clearly denote intent and
make it obvious that concurrency is expected. Use READ_ONCE() to avoid
having to reason about compiler optimizations now and in future.
With previous refactor, mark the read to owner->on_cpu in owner_on_cpu(),
which immediately precedes the loop executing mutex_spin_on_owner().
Signed-off-by: Marco Elver <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Move the owner_on_cpu() from kernel/locking/rwsem.c into
include/linux/sched.h with under CONFIG_SMP, then use it
in the mutex/rwsem/rtmutex to simplify the code.
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There is not really a softirq context on PREEMPT_RT. Softirqs on
PREEMPT_RT are always invoked within the context of a threaded
interrupt handler or within ksoftirqd. The "in-softirq" context is
preemptible and is protected by a per-CPU lock to ensure mutual
exclusion.
There is no difference on PREEMPT_RT between spin_lock_irq() and
spin_lock() because the former does not disable interrupts. Therefore
if a lock is used in_softirq() and locked once with spin_lock_irq()
then lockdep will report this with "inconsistent {SOFTIRQ-ON-W} ->
{IN-SOFTIRQ-W} usage".
Teach lockdep that we don't really do softirqs on -RT.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The locking selftest for ww-mutex expects to operate directly on the
base-mutex which becomes a rtmutex on PREEMPT_RT.
Add a rtmutex based implementation of mutex_lock_nest_lock() and
mutex_lock_killable() named rt_mutex_lock_nest_lock() abd
rt_mutex_lock_killable().
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
ESL(Enhanced System Lockdown) was designed to lock PCI adapter firmware
images and prevent changes to critical non-volatile configuration data
so that uncontrolled, malicious or unintentional modification to the
adapters are avoided, ensuring it's operational state. Once this feature is
enabled, the device is locked, rejecting any modification to non-volatile
images. Once unlocked, the protection is off such that firmware and
non-volatile configurations may be altered.
Driver just reflects the capability and status of this through
the ethtool private flag.
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Alok Prasad <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch add some new qed APIs to query status block
info and report various data to MFW on tx timeout event
Along with that it enhances qede to dump more debug logs
(not just specific to the queue which was reported by stack)
on tx timeout which includes various other basic metadata about
all tx queues and other info (like status block etc.)
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Alok Prasad <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In case of BLK_MQ_F_BLOCKING, per-hctx srcu is used to protect dispatch
critical area. However, this srcu instance stays at the end of hctx, and
it often takes standalone cacheline, often cold.
Inside srcu_read_lock() and srcu_read_unlock(), WRITE is always done on
the indirect percpu variable which is allocated from heap instead of
being embedded, srcu->srcu_idx is read only in srcu_read_lock(). It
doesn't matter if srcu structure stays in hctx or request queue.
So switch to per-request-queue srcu for protecting dispatch, and this
way simplifies quiesce a lot, not mention quiesce is always done on the
request queue wide.
Signed-off-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
refcount_t is not as expensive as it used to be, but it's still more
expensive than the io_uring method of using atomic_t and just checking
for potential over/underflow.
This borrows that same implementation, which in turn is based on the
mm implementation from Linus.
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
No functional changes in this patch, just in preparation for efficiently
calling this light function from the block O_DIRECT handling.
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
I completed the first batch of signal changes for v5.17 against
v5.16-rc1 before the SA_IMMUTABLE fixes where completed. Which leaves
me with two lines of development that I want on my signal development
branch both rooted at v5.16-rc1. Especially as I am hoping
to reach the point of being able to remove SA_IMMUTABLE.
Linus merged my SA_IMUTABLE fixes as:
7af959b5d5c8 ("Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace")
To avoid rebasing the development changes that are currently complete I am
merging the work I sent upstream to Linus to make my life simpler.
The SA_IMMUTABLE changes as they are described in Linus's merge commit.
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
cgroup.h (therefore swap.h, therefore half of the universe)
includes bpf.h which in turn includes module.h and slab.h.
Since we're about to get rid of that dependency we need
to clean things up.
v2: drop the cpu.h include from cacheinfo.h, it's not necessary
and it makes riscv sensitive to ordering of include files.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Krzysztof Wilczyński <[email protected]>
Acked-by: Peter Chen <[email protected]>
Acked-by: SeongJae Park <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/ # v1
Link: https://lore.kernel.org/all/[email protected]/ # cacheinfo discussion
Link: https://lore.kernel.org/bpf/[email protected]
|
|
After transfer errors it makes sense to cancel an ongoing synchronous
command that cannot complete anymore. To permit this, export the old
hci_req_sync_cancel function as hci_cmd_sync_cancel in the API.
Signed-off-by: Benjamin Berg <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Currently we only support idmapped mounts for filesystems mounted
without an idmapping. This was a conscious decision mentioned in
multiple places (cf. e.g. [1]).
As explained at length in [3] it is perfectly fine to extend support for
idmapped mounts to filesystem's mounted with an idmapping should the
need arise. The need has been there for some time now. Various container
projects in userspace need this to run unprivileged and nested
unprivileged containers (cf. [2]).
Before we can port any filesystem that is mountable with an idmapping to
support idmapped mounts we need to first extend the mapping helpers to
account for the filesystem's idmapping. This again, is explained at
length in our documentation at [3] but I'll give an overview here again.
Currently, the low-level mapping helpers implement the remapping
algorithms described in [3] in a simplified manner. Because we could
rely on the fact that all filesystems supporting idmapped mounts are
mounted without an idmapping the translation step from or into the
filesystem idmapping could be skipped.
In order to support idmapped mounts of filesystem's mountable with an
idmapping the translation step we were able to skip before cannot be
skipped anymore. A filesystem mounted with an idmapping is very likely
to not use an identity mapping and will instead use a non-identity
mapping. So the translation step from or into the filesystem's idmapping
in the remapping algorithm cannot be skipped for such filesystems. More
details with examples can be found in [3].
This patch adds a few new and prepares some already existing low-level
mapping helpers to perform the full translation algorithm explained in
[3]. The low-level helpers can be written in a way that they only
perform the additional translation step when the filesystem is indeed
mounted with an idmapping.
If the low-level helpers detect that they are not dealing with an
idmapped mount they can simply return the relevant k{g,u}id unchanged;
no remapping needs to be performed at all. The no_idmapping() helper
detects whether the shortcut can be used.
If the low-level helpers detected that they are dealing with an idmapped
mount but the underlying filesystem is mounted without an idmapping we
can rely on the previous shorcut and can continue to skip the
translation step from or into the filesystem's idmapping.
These checks guarantee that only the minimal amount of work is
performed. As before, if idmapped mounts aren't used the low-level
helpers are idempotent and no work is performed at all.
This patch adds the helpers mapped_k{g,u}id_fs() and
mapped_k{g,u}id_user(). Following patches will port all places to
replace the old k{g,u}id_into_mnt() and k{g,u}id_from_mnt() with these
two new helpers. After the conversion is done k{g,u}id_into_mnt() and
k{g,u}id_from_mnt() will be removed. This also concludes the renaming of
the mapping helpers we started in [4]. Now, all mapping helpers will
started with the "mapped_" prefix making everything nice and consistent.
The mapped_k{g,u}id_fs() helpers replace the k{g,u}id_into_mnt()
helpers. They are to be used when k{g,u}ids are to be mapped from the
vfs, e.g. from from struct inode's i_{g,u}id. Conversely, the
mapped_k{g,u}id_user() helpers replace the k{g,u}id_from_mnt() helpers.
They are to be used when k{g,u}ids are to be written to disk, e.g. when
entering from a system call to change ownership of a file.
This patch only introduces the helpers. It doesn't yet convert the
relevant places to account for filesystem mounted with an idmapping.
[1]: commit 2ca4dcc4909d ("fs/mount_setattr: tighten permission checks")
[2]: https://github.com/containers/podman/issues/10374
[3]: Documentations/filesystems/idmappings.rst
[4]: commit a65e58e791a1 ("fs: document and rename fsid helpers")
Link: https://lore.kernel.org/r/[email protected] (v1)
Link: https://lore.kernel.org/r/[email protected] (v2)
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
If the caller's fs{g,u}id aren't mapped in the mount's idmapping we can
return early and skip the check whether the mapped fs{g,u}id also have a
mapping in the filesystem's idmapping. If the fs{g,u}id aren't mapped in
the mount's idmapping they consequently can't be mapped in the
filesystem's idmapping. So there's no point in checking that.
Link: https://lore.kernel.org/r/[email protected] (v1)
Link: https://lore.kernel.org/r/[email protected] (v2)
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Amir Goldstein <[email protected]>
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
The low-level mapping helpers were so far crammed into fs.h. They are
out of place there. The fs.h header should just contain the higher-level
mapping helpers that interact directly with vfs objects such as struct
super_block or struct inode and not the bare mapping helpers. Similarly,
only vfs and specific fs code shall interact with low-level mapping
helpers. And so they won't be made accessible automatically through
regular {g,u}id helpers.
Link: https://lore.kernel.org/r/[email protected] (v1)
Link: https://lore.kernel.org/r/[email protected] (v2)
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Amir Goldstein <[email protected]>
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Multiple places open-code the same check to determine whether a given
mount is idmapped. Introduce a simple helper function that can be used
instead. This allows us to get rid of the fragile open-coding. We will
later change the check that is used to determine whether a given mount
is idmapped. Introducing a helper allows us to do this in a single
place instead of doing it for multiple places.
Link: https://lore.kernel.org/r/[email protected] (v1)
Link: https://lore.kernel.org/r/[email protected] (v2)
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Amir Goldstein <[email protected]>
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
The code and documentation are more difficult to maintain when kept
separately. This is further compounded when the standard structure
documentation infrastructure is not used.
Move the documentation into the code, use the standard documentation
infrastructure, add current documented functions, and reference the text
in the rst file.
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Ira Weiny <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add an example code snipit to the module_auxiliary_driver()
documentation which is consistent with the other example code in the
elsewhere in the documentation.
Signed-off-by: Ira Weiny <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Xilinx event management driver provides an interface to subscribe or
unsubscribe for the event/callback supported by firmware. An agent can use
this driver to register for Error Event, Device Event and Suspend callback.
This driver only allows one agent per event to do registration. Driver will
return an error in case of multiple registration for the same event.
This driver gets notification from firmware through TF-A as SGI. During
initialization, event manager driver register handler for SGI used for
notification. It also provides SGI number info to TF-A by using
IOCTL_REGISTER_SGI call to TF-A.
After receiving notification from firmware, the driver makes an SMC call to
TF-A to get IPI data. From the IPI data provided by TF-A, event manager
identified the cause of event and forward that event/callback notification
to the respective subscribed driver. After this, in case of Error Event,
driver performs unregistration as firmware expecting from agent to do
re-registration if the agent wants to get notified on the second occurrence
of an error event.
Add new IOCTL id IOCTL_REGISTER_SGI = 25 which is used to register SGI on
TF-A.
Older firmware doesn't have all required support for event handling which
is required by the event manager driver. So add check for the register
notifier version in the event manager driver.
Xilinx event management driver provides support to subscribe for multiple
error events with the use of Event Mask in a single call of
xlnx_register_event(). Agent driver can provide 'Event' parameter value as
ORed of multiple event masks to register single callback for multiple
events. For example, to register callback for event=0x1 and event=0x2 for
the given node, agent can provide event=0x3 (0x1 | 0x2). It is not possible
to register multiple events for different nodes in a single registration
call.
Also provide support to receive multiple error events as in single
notification from firmware and then forward it to subscribed drivers via
registered callback one by one.
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Tejas Patel <[email protected]>
Signed-off-by: Rajan Vaja <[email protected]>
Signed-off-by: Abhyuday Godhasara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Provide default defines for the topology_book_[id|cpumask] and
topology_drawer_[id|cpumask] macros just like for each other topology
level.
This way all topology levels are handled in a similar way. Still the
the book and drawer levels are only used on s390, and also the sysfs
attributes are only created on s390. However other architectures may
opt in if wanted.
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The cluster_id and cluster_cpus topology sysfs attributes have been
added with commit c5e22feffdd7 ("topology: Represent clusters of CPUs
within a die").
They are currently only used for x86, arm64, and riscv (via generic
arch topology), however they are still present with bogus default
values for all other architectures. Instead of enforcing such new
sysfs attributes to all architectures, make them only optional visible
if an architecture opts in by defining both the topology_cluster_id
and topology_cluster_cpumask attributes.
This is similar to what was done when the book and drawer topology
levels were introduced: avoid useless and therefore confusing sysfs
attributes for architectures which cannot make use of them.
This should not break any existing applications, since this is a
new interface introduced with the v5.16 merge window.
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The die_id and die_cpus topology sysfs attributes have been added with
commit 0e344d8c709f ("cpu/topology: Export die_id") and commit
2e4c54dac7b3 ("topology: Create core_cpus and die_cpus sysfs attributes").
While they are currently only used and useful for x86 they are still
present with bogus default values for all architectures. Instead of
enforcing such new sysfs attributes to all architectures, make them
only optional visible if an architecture opts in by defining both the
topology_die_id and topology_die_cpumask attributes.
This is similar to what was done when the book and drawer topology
levels were introduced: avoid useless and therefore confusing sysfs
attributes for architectures which cannot make use of them.
This should not break any existing applications, since this is a
rather new interface and applications should be able to handle also
older kernel versions without such attributes - besides that they
contain only useful information for x86.
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
KCSAN reported a data-race [1] around tx_rebalance_counter
which can be accessed from different contexts, without
the protection of a lock/mutex.
[1]
BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor
write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0:
bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613
bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949
do_set_master net/core/rtnetlink.c:2521 [inline]
__rtnl_newlink net/core/rtnetlink.c:3475 [inline]
rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1:
bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
worker_thread+0x616/0xa70 kernel/workqueue.c:2445
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x00000001 -> 0x00000064
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bond1 bond_alb_monitor
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
KMSAN is still not happy [1].
I missed that passive connections do not inherit their
sk_rx_queue_mapping values from the request socket,
but instead tcp_child_process() is calling
sk_mark_napi_id(child, skb)
We have many sk_mark_napi_id() callers, so I am providing
a new helper, forcing the setting sk_rx_queue_mapping
and sk_napi_id.
Note that we had no KMSAN report for sk_napi_id because
passive connections got a copy of this field from the listener.
sk_rx_queue_mapping in the other hand is inside the
sk_dontcopy_begin/sk_dontcopy_end so sk_clone_lock()
leaves this field uninitialized.
We might remove dead code populating req->sk_rx_queue_mapping
in the future.
[1]
BUG: KMSAN: uninit-value in __sk_rx_queue_set include/net/sock.h:1924 [inline]
BUG: KMSAN: uninit-value in sk_rx_queue_update include/net/sock.h:1938 [inline]
BUG: KMSAN: uninit-value in sk_mark_napi_id include/net/busy_poll.h:136 [inline]
BUG: KMSAN: uninit-value in tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833
__sk_rx_queue_set include/net/sock.h:1924 [inline]
sk_rx_queue_update include/net/sock.h:1938 [inline]
sk_mark_napi_id include/net/busy_poll.h:136 [inline]
tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833
tcp_v4_rcv+0x3d83/0x4ed0 net/ipv4/tcp_ipv4.c:2066
ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
__netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
__netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
__netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
gro_normal_list net/core/dev.c:5850 [inline]
napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
__napi_poll+0x14e/0xbc0 net/core/dev.c:7020
napi_poll net/core/dev.c:7087 [inline]
net_rx_action+0x824/0x1880 net/core/dev.c:7174
__do_softirq+0x1fe/0x7eb kernel/softirq.c:558
run_ksoftirqd+0x33/0x50 kernel/softirq.c:920
smpboot_thread_fn+0x616/0xbf0 kernel/smpboot.c:164
kthread+0x721/0x850 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
Uninit was created at:
__alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409
alloc_pages+0x8a5/0xb80
alloc_slab_page mm/slub.c:1810 [inline]
allocate_slab+0x287/0x1c20 mm/slub.c:1947
new_slab mm/slub.c:2010 [inline]
___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039
__slab_alloc mm/slub.c:3126 [inline]
slab_alloc_node mm/slub.c:3217 [inline]
slab_alloc mm/slub.c:3259 [inline]
kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264
sk_prot_alloc+0xeb/0x570 net/core/sock.c:1914
sk_clone_lock+0xd6/0x1940 net/core/sock.c:2118
inet_csk_clone_lock+0x8d/0x6a0 net/ipv4/inet_connection_sock.c:956
tcp_create_openreq_child+0xb1/0x1ef0 net/ipv4/tcp_minisocks.c:453
tcp_v4_syn_recv_sock+0x268/0x2710 net/ipv4/tcp_ipv4.c:1563
tcp_check_req+0x207c/0x2a30 net/ipv4/tcp_minisocks.c:765
tcp_v4_rcv+0x36f5/0x4ed0 net/ipv4/tcp_ipv4.c:2047
ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
__netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
__netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
__netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
gro_normal_list net/core/dev.c:5850 [inline]
napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
__napi_poll+0x14e/0xbc0 net/core/dev.c:7020
napi_poll net/core/dev.c:7087 [inline]
net_rx_action+0x824/0x1880 net/core/dev.c:7174
__do_softirq+0x1fe/0x7eb kernel/softirq.c:558
Fixes: 342159ee394d ("net: avoid dirtying sk->sk_rx_queue_mapping")
Fixes: a37a0ee4d25c ("net: avoid uninit-value from tcp_conn_request")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Tested-by: Alexander Potapenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit d24dbd7541ff ("mtd: maps: Get rid of the latch-addr-flash driver")
removed the last user of <linux/mtd/latch-addr-flash.h> but left the header
file behind. Nothing uses this file, delete it now.
Cc: Boris Brezillon <[email protected]>
Cc: Miquel Raynal <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Vignesh Raghavendra <[email protected]>
Cc: [email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
The flow counters bulk query buffer is allocated once during
mlx5_fc_init_stats(). For PFs and VFs this buffer usually takes a little
more than 512KB of memory, which is aligned to the next power of 2, to
1MB. For SFs, this buffer is reduced and takes around 128 Bytes.
The buffer size determines the maximum number of flow counters that
can be queried at a time. Thus, having a bigger buffer can improve
performance for users that need to query many flow counters.
There are cases that don't use many flow counters and don't need a big
buffer (e.g. SFs, VFs). Since this size is critical with large scale,
in these cases the buffer size should be reduced.
In order to reduce memory consumption while maintaining query
performance, change the query buffer's allocation scheme to the
following:
- First allocate the buffer with small initial size.
- If the number of counters surpasses the initial size, resize the
buffer to the maximum size.
The buffer only grows and isn't shrank, because users with many flow
counters don't care about the buffer size and we don't want to add
resize overhead if the current number of counters drops.
This solution is preferable to the current one, which is less accurate
and only addresses SFs.
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Bit of an uptick in patch count this week, though it's all relatively
small overall.
I suspect msm has been queuing up a few fixes to skew it here.
Otherwise amdgpu has a scattered bunch of small fixes, and then some
vc4, i915.
virtio-gpu changes an rc1 introduced uAPI mistake, and makes it
operate more like other drivers. This should be fine as no userspace
relies on the behaviour yet.
Summary:
dma-buf:
- memory leak fix
msm:
- kasan found memory overwrite
- mmap flags
- fencing error bug
- ioctl NULL ptr
- uninit var
- devfreqless devices fix
- dsi lanes fix
- dp: avoid unpowered aux xfers
amdgpu:
- IP discovery based enumeration fixes
- vkms fixes
- DSC fixes for DP MST
- Audio fix for hotplug with tiled displays
- Misc display fixes
- DP tunneling fix
- DP fix
- Aldebaran fix
amdkfd:
- Locking fix
- Static checker fix
- Fix double free
i915:
- backlight regression
- Intel HDR backlight detection fix
- revert TGL workaround that caused hangs
virtio-gpu:
- switch back to drm_poll
vc4:
- memory leak
- error check fix
- HVS modesetting fixes"
* tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits)
Revert "drm/i915: Implement Wa_1508744258"
drm/amdkfd: process_info lock not needed for svm
drm/amdgpu: adjust the kfd reset sequence in reset sriov function
drm/amd/display: add connector type check for CRC source set
drm/amdkfd: fix double free mem structure
drm/amdkfd: set "r = 0" explicitly before goto
drm/amd/display: Add work around for tunneled MST.
drm/amd/display: Fix for the no Audio bug with Tiled Displays
drm/amd/display: Clear DPCD lane settings after repeater training
drm/amd/display: Allow DSC on supported MST branch devices
drm/amdgpu: Don't halt RLC on GFX suspend
drm/amdgpu: fix the missed handling for SDMA2 and SDMA3
drm/amdgpu: check atomic flag to differeniate with legacy path
drm/amdgpu: cancel the correct hrtimer on exit
drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID
drm/i915/dp: Perform 30ms delay after source OUI write
dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow
drm/i915: Add support for panels with VESA backlights with PWM enable/disable
drm/vc4: kms: Fix previous HVS commit wait
drm/vc4: kms: Don't duplicate pending commit
...
|