| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In preparation for converting bit_spin_lock to rwlock in zsmalloc so
that multiple writers of zspages can run at the same time but those
zspages are supposed to be different zspage instance. Thus, it's not
deadlock. This patch adds write_lock_nested to support the case for
LOCKDEP.
[[email protected]: fix write_lock_nested for RT]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: fixup write_lock_nested() implementation]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Minchan Kim <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Tested-by: Sebastian Andrzej Siewior <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Naresh Kamboju <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
Move sysctl_kprobes_optimization from kernel/sysctl.c to
kernel/kprobes.c. Use register_sysctl() to register the sysctl
interface.
[[email protected]: fix compile issue when CONFIG_OPTPROBES is disabled]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: Stephen Kitt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This moves the fs/coredump.c respective sysctls to its own file.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: Stephen Kitt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
build warning when CONFIG_PRINTK=n
kernel/printk/printk.c:175:5: warning: no previous prototype for
'devkmsg_sysctl_set_loglvl' [-Wmissing-prototypes]
devkmsg_sysctl_set_loglvl() is only used in sysctl.c when
CONFIG_PRINTK=y, but it participates in the build when CONFIG_PRINTK=n.
So add compile dependency CONFIG_PRINTK=y && CONFIG_SYSCTL=y to fix the
build warning.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: Stephen Kitt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Rename sysctl_init() to sysctl_init_bases() so to reflect exactly what
this is doing.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This moves the namespace sysctls to its own file as part of the
kernel/sysctl.c spring cleaning
Since we have now removed all sysctls for "fs", we now have to declare
it on the filesystem code, we do that using the new helper, which
reduces boiler plate code.
We rename init_fs_shared_sysctls() to init_fs_sysctls() to reflect that
now fs/sysctls.c is taking on the burden of being the first to register
the base directory as well.
Lastly, since init code will load in the order in which we link it we
have to move the sysctl code to be linked in early, so that its early
init routine runs prior to other fs code. This way, other filesystem
code can register their own sysctls using the helpers after this:
* register_sysctl_init()
* register_sysctl()
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "sysctl: add and use base directory declarer and
registration helper".
In this patch series we start addressing base directories, and so we
start with the "fs" sysctls. The end goal is we end up completely
moving all "fs" sysctl knobs out from kernel/sysctl.
This patch (of 6):
Add a set of helpers which can be used to declare and register base
directory sysctls on their own. We do this so we can later move each of
the base sysctl directories like "fs", "kernel", etc, to their own
respective files instead of shoving the declarations and registrations
all on kernel/sysctl.c. The lazy approach has caught up and with this,
we just end up extending the list of base directories / sysctls on one
file and this makes maintenance difficult due to merge conflicts from
many developers.
The declarations are used first by kernel/sysctl.c for registration its
own base which over time we'll try to clean up. It will be used in the
next patch to demonstrate how to cleanly deal with base sysctl
directories.
[[email protected]: null-terminate the ctl_table arrays]
Link: https://lkml.kernel.org/r/YafJY3rXDYnjK/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the pipe sysctls to its own file.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move namei's own sysctl knobs to its own file.
Other than the move we also avoid initializing two static variables to 0
as this is not needed:
* sysctl_protected_symlinks
* sysctl_protected_hardlinks
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
The locking fs sysctls are only used on fs/locks.c, so move them there.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The maxolduid value is only shared for sysctl purposes for use on a max
range. Just stuff this into our shared const array.
[[email protected]: fix sysctl_vals[], per Mickaël]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Mickaël Salaün <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the dcache sysctl clutter out of kernel/sysctl.c. This is a
small one-off entry, perhaps later we can simplify this representation,
but for now we use the helpers we have. We won't know how we can
simplify this further untl we're fully done with the cleanup.
[[email protected]: avoid unused-function warning]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
We can create the sysctl dynamically on early init for fs stat to help
with this clutter. This dusts off the fs stat syctls knobs and puts
them into where they are declared.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "sysctl: 4th set of kernel/sysctl cleanups".
This is slimming down the fs uses of kernel/sysctl.c to the point that
the next step is to just get rid of the fs base directory for it and
move that elsehwere, so that next patch series starts dealing with that
to demo how we can end up cleaning up a full base directory from
kernel/sysctl.c, one at a time.
This patch (of 9):
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the inode sysctls to its own file. Since we are no longer using
this outside of fs/ remove the extern declaration of its respective proc
helper.
We use early_initcall() as it is the earliest we can use.
[[email protected]: avoid unused-variable warning]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Provide a way to share unsigned long values. This will allow others to
not have to re-invent these values.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the stack_erasing sysctl from kernel/sysctl.c to
kernel/stackleak.c and use register_sysctl() to register the sysctl
interface.
[[email protected]: commit log update]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the sg-big-buff sysctl from kernel/sysctl.c to drivers/scsi/sg.c
and use register_sysctl() to register the sysctl interface.
[[email protected]: commit log update]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The way to create a subdirectory on top of sysctl_mount_point is a bit
obscure, and *why* we do that even so more. Provide a helper which
makes it clear why we do this.
[[email protected]: export register_sysctl_mount_point() to
modules]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Suggested-by: "Eric W. Biederman" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the random sysctls to their own file and use
register_sysctl_init().
[[email protected]: commit log update to justify the move]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "sysctl: 3rd set of kernel/sysctl cleanups", v2.
This is the third set of patches to help address cleaning the kitchen
seink in kernel/sysctl.c and to move sysctls away to where they are
actually implemented / used.
This patch (of 8):
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the firmware configuration sysctl table to the only place where
it is used, and make it clear that if sysctls are disabled this is not
used.
[[email protected]: export register_firmware_config_sysctl and unregister_firmware_config_sysctl to modules]
[[email protected]: use EXPORT_SYMBOL_NS_GPL instead]
[[email protected]: fix that so it compiles]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: major commit log update to justify the move]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the epoll_table sysctl to fs/eventpoll.c and use
register_sysctl().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under. Simplify this by using
register_sysctl() and specifying the directory path directly.
Move inotify_user sysctl to inotify_user.c while at it to remove clutter
from kernel/sysctl.c.
[[email protected]: remember to register fanotify_table]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: update commit log to reflect new path we decided to take]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move dnotify sysctls to dnotify.c and use the new
register_sysctl_init() to register the sysctl interface.
[[email protected]: adjust the commit log to justify the move]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Acked-by: Jan Kara <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
Move aio sysctl to aio.c and use the new register_sysctl_init() to
register the sysctl interface for aio.
[[email protected]: adjust commit log to justify the move]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move hung_task sysctl interface to hung_task.c and use
register_sysctl() to register the sysctl interface.
[[email protected]: commit log refresh and fixed 2-3 0day reported compile issues]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
sysctl has helpers which let us specify boundary values for a min or max
int value. Since these are used for a boundary check only they don't
change, so move these variables to sysctl_vals to avoid adding duplicate
variables. This will help with our cleanup of kernel/sysctl.c.
[[email protected]: update it for "mm/pagealloc: sysctl: change watermark_scale_factor max limit to 30%"]
[[email protected]: major rebase]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "sysctl: first set of kernel/sysctl cleanups", v2.
Finally had time to respin the series of the work we had started last
year on cleaning up the kernel/sysct.c kitchen sink. People keeps
stuffing their sysctls in that file and this creates a maintenance
burden. So this effort is aimed at placing sysctls where they actually
belong.
I'm going to split patches up into series as there is quite a bit of
work.
This first set adds register_sysctl_init() for uses of registerting a
sysctl on the init path, adds const where missing to a few places,
generalizes common values so to be more easy to share, and starts the
move of a few kernel/sysctl.c out where they belong.
The majority of rework on v2 in this first patch set is 0-day fixes.
Eric Biederman's feedback is later addressed in subsequent patch sets.
I'll only post the first two patch sets for now. We can address the
rest once the first two patch sets get completely reviewed / Acked.
This patch (of 9):
The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
Today though folks heavily rely on tables on kernel/sysctl.c so they can
easily just extend this table with their needed sysctls. In order to
help users move their sysctls out we need to provide a helper which can
be used during code initialization.
We special-case the initialization use of register_sysctl() since it
*is* safe to fail, given all that sysctls do is provide a dynamic
interface to query or modify at runtime an existing variable. So the
use case of register_sysctl() on init should *not* stop if the sysctls
don't end up getting registered. It would be counter productive to stop
boot if a simple sysctl registration failed.
Provide a helper for init then, and document the recommended init levels
to use for callers of this routine. We will later use this in
subsequent patches to start slimming down kernel/sysctl.c tables and
moving sysctl registration to the code which actually needs these
sysctls.
[[email protected]: major commit log and documentation rephrasing also moved to fs/proc/proc_sysctl.c ]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Qing Wang <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Amir Goldstein <[email protected]>
Cc: Stephen Kitt <[email protected]>
Cc: Antti Palosaari <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Clemens Ladisch <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Lukas Middendorf <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Phillip Potter <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This fixes the FIXME in migrate_vma_check_page().
Before migrating a page migration code will take a reference and check
there are no unexpected page references, failing the migration if there
are. When a thread faults on a migration entry it will take a temporary
reference to the page to wait for the page to become unlocked signifying
the migration entry has been removed.
This reference is dropped just prior to waiting on the page lock,
however the extra reference can cause migration failures so it is
desirable to avoid taking it.
As migration code already has a reference to the migrating page an extra
reference to wait on PG_locked is unnecessary so long as the reference
can't be dropped whilst setting up the wait.
When faulting on a migration entry the ptl is taken to check the
migration entry. Removing a migration entry also requires the ptl, and
migration code won't drop its page reference until after the migration
entry has been removed. Therefore retaining the ptl of a migration
entry is sufficient to ensure the page has a reference. Reworking
migration_entry_wait() to hold the ptl until the wait setup is complete
means the extra page reference is no longer needed.
[[email protected]: v5]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alistair Popple <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Ralph Campbell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Similar to skb_header_pointer, introduce bpf_xdp_pointer utility routine
to return a pointer to a given position in the xdp_buff if the requested
area (offset + len) is contained in a contiguous memory area otherwise it
will be copied in a bounce buffer provided by the caller.
Similar to the tc counterpart, introduce the two following xdp helpers:
- bpf_xdp_load_bytes
- bpf_xdp_store_bytes
Reviewed-by: Eelco Chaudron <[email protected]>
Acked-by: Toke Hoiland-Jorgensen <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/ab285c1efdd5b7a9d361348b1e7d3ef49f6382b3.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The check for tail call map compatibility ensures that tail calls only
happen between maps of the same type. To ensure backwards compatibility for
XDP frags we need a similar type of check for cpumap and devmap
programs, so move the state from bpf_array_aux into bpf_map, add
xdp_has_frags to the check, and apply the same check to cpumap and devmap.
Acked-by: John Fastabend <[email protected]>
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Toke Hoiland-Jorgensen <[email protected]>
Link: https://lore.kernel.org/r/f19fd97c0328a39927f3ad03e1ca6b43fd53cdfd.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This change adds support for tail growing and shrinking for XDP frags.
When called on a non-linear packet with a grow request, it will work
on the last fragment of the packet. So the maximum grow size is the
last fragments tailroom, i.e. no new buffer will be allocated.
A XDP frags capable driver is expected to set frag_size in xdp_rxq_info
data structure to notify the XDP core the fragment size.
frag_size set to 0 is interpreted by the XDP core as tail growing is
not allowed.
Introduce __xdp_rxq_info_reg utility routine to initialize frag_size field.
When shrinking, it will work from the last fragment, all the way down to
the base buffer depending on the shrinking size. It's important to mention
that once you shrink down the fragment(s) are freed, so you can not grow
again to the original size.
Acked-by: Toke Hoiland-Jorgensen <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Eelco Chaudron <[email protected]>
Link: https://lore.kernel.org/r/eabda3485dda4f2f158b477729337327e609461d.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Introduce bpf_xdp_get_buff_len helper in order to return the xdp buffer
total size (linear and paged area)
Acked-by: Toke Hoiland-Jorgensen <[email protected]>
Acked-by: John Fastabend <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/aac9ac3504c84026cf66a3c71b7c5ae89bc991be.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Introduce BPF_F_XDP_HAS_FRAGS and the related field in bpf_prog_aux
in order to notify the driver the loaded program support xdp frags.
Acked-by: Toke Hoiland-Jorgensen <[email protected]>
Acked-by: John Fastabend <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/db2e8075b7032a356003f407d1b0deb99adaa0ed.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Take into account if the received xdp_buff/xdp_frame is non-linear
recycling/returning the frame memory to the allocator or into
xdp_frame_bulk.
Acked-by: Toke Hoiland-Jorgensen <[email protected]>
Acked-by: John Fastabend <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/a961069febc868508ce1bdf5e53a343eb4e57cb2.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Introduce xdp_update_skb_shared_info routine to update frags array
metadata in skb_shared_info data structure converting to a skb from
a xdp_buff or xdp_frame.
According to the current skb_shared_info architecture in
xdp_frame/xdp_buff and to the xdp frags support, there is
no need to run skb_add_rx_frag() and reset frags array converting the buffer
to a skb since the frag array will be in the same position for xdp_buff/xdp_frame
and for the skb, we just need to update memory metadata.
Introduce XDP_FLAGS_PF_MEMALLOC flag in xdp_buff_flags in order to mark
the xdp_buff or xdp_frame as under memory-pressure if pages of the frags array
are under memory pressure. Doing so we can avoid looping over all fragments in
xdp_update_skb_shared_info routine. The driver is expected to set the
flag constructing the xdp_buffer using xdp_buff_set_frag_pfmemalloc
utility routine.
Rely on xdp_update_skb_shared_info in __xdp_build_skb_from_frame routine
converting the non-linear xdp_frame to a skb after performing a XDP_REDIRECT.
Acked-by: Toke Hoiland-Jorgensen <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/bfd23fb8a8d7438724f7819c567cdf99ffd6226f.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Introduce flags field in xdp_frame and xdp_buffer data structures
to define additional buffer features. At the moment the only
supported buffer feature is frags bit (XDP_FLAGS_HAS_FRAGS).
frags bit is used to specify if this is a linear buffer
(XDP_FLAGS_HAS_FRAGS not set) or a frags frame (XDP_FLAGS_HAS_FRAGS
set). In the latter case the driver is expected to initialize the
skb_shared_info structure at the end of the first buffer to link together
subsequent buffers belonging to the same frame.
Acked-by: Toke Hoiland-Jorgensen <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/e389f14f3a162c0a5bc6a2e1aa8dd01a90be117d.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Introduce xdp_frags_size field in skb_shared_info data structure
to store xdp_buff/xdp_frame frame paged size (xdp_frags_size will
be used in xdp frags support). In order to not increase
skb_shared_info size we will use a hole due to skb_shared_info
alignment.
Acked-by: Toke Hoiland-Jorgensen <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/8a849819a3e0a143d540f78a3a5add76e17e980d.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a comment into fscache_note_page_release() to explain how the
page-release optimisation logic works[1]. It's not entirely obvious as it
has nothing to do with whether or not the netfs file contains data.
FSCACHE_COOKIE_NO_DATA_TO_READ is set if we have no data in the cache yet
(ie. the backing file lookup was negative, the file is 0 length or the
cookie got invalidated). It means that we have no data in the cache, not
that the file is necessarily empty on the server.
FSCACHE_COOKIE_HAVE_DATA is set once we've stored data in the backing file.
From that point on, we have data we *could* read - however, it's covered by
pages in the netfs pagecache until at such time one of those covering pages
is released.
So if we've written data to the cache (HAVE_DATA) and there wasn't any data
in the cache when we started (NO_DATA_TO_READ), it may no longer be true
that we can skip reading from the cache.
Read skipping is done by cachefiles_prepare_read().
Note that tracking is not done on a per-page basis, but only on a per-file
basis.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/164251408479.3435901.9540165422908194636.stgit@warthog.procyon.org.uk/ # v1
|
|
Add a tracepoint to log failure to apply an active mark to a file in
addition to tracing successfully setting and unsetting the mark.
Also include the backing file inode number in the message logged to dmesg.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/164251404666.3435901.17331742792401482190.stgit@warthog.procyon.org.uk/ # v1
|
|
Make some adjustments to tracepoints to make the tracing a bit more
followable:
(1) Standardise on displaying the backing inode number as "B=<hex>" with
no leading zeros.
(2) Make the cachefiles_lookup tracepoint log the directory inode number
as well as the looked-up inode number.
(3) Add a cachefiles_lookup tracepoint into cachefiles_get_directory() to
log directory lookup.
(4) Add a new cachefiles_mkdir tracepoint and use that to log a successful
mkdir from cachefiles_get_directory().
(5) Make the cachefiles_unlink and cachefiles_rename tracepoints log the
inode number of the affected file/dir rather than dentry struct
pointers.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/164251403694.3435901.9797725381831316715.stgit@warthog.procyon.org.uk/ # v1
|
|
Pull block fixes from Jens Axboe:
"Various little minor fixes that should go into this release:
- Fix issue with cloned bios and IO accounting (Christoph)
- Remove redundant assignments (Colin, GuoYong)
- Fix an issue with the mq-deadline async_depth sysfs interface (me)
- Fix brd module loading race (Tetsuo)
- Shared tag map wakeup fix (Laibin)
- End of bdev read fix (OGAWA)
- srcu leak fix (Ming)"
* tag 'block-5.17-2022-01-21' of git://git.kernel.dk/linux-block:
block: fix async_depth sysfs interface for mq-deadline
block: Fix wrong offset in bio_truncate()
block: assign bi_bdev for cloned bios in blk_rq_prep_clone
block: cleanup q->srcu
block: Remove unnecessary variable assignment
brd: remove brd_devices_mutex mutex
aoe: remove redundant assignment on variable n
loop: remove redundant initialization of pointer node
blk-mq: fix tag_get wait task can't be awakened
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Two new drivers this cycle and a significant rework of the CMOS driver
make the bulk of the changes.
I also carry powerpc changes with the agreement of Michael.
New drivers:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Driver updates:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support"
* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: sunplus: fix return value in sp_rtc_probe()
rtc: cmos: Evaluate century appropriate
rtc: gamecube: Fix an IS_ERR() vs NULL check
rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
rtc: pxa: fix null pointer dereference
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: Move variable into switch case statement
rtc: pcf2127: Fix typo in comment
dt-bindings: rtc: Add Sunplus RTC json-schema
rtc: Add driver for RTC in Sunplus SP7021
rtc: rs5c372: fix incorrect oscillation value on r2221tl
rtc: rs5c372: add offset correction support
rtc: cmos: avoid UIP when writing alarm time
rtc: cmos: avoid UIP when reading alarm time
rtc: mc146818-lib: refactor mc146818_does_rtc_work
rtc: mc146818-lib: refactor mc146818_get_time
rtc: mc146818-lib: extract mc146818_avoid_UIP
rtc: mc146818-lib: fix RTC presence check
rtc: Check return value from mc146818_get_time()
...
|
|
Right now there is no way to query whether BPF programs are
attached to a sockmap or not.
we can use the standard interface in libbpf to query, such as:
bpf_prog_query(mapFd, BPF_SK_SKB_STREAM_PARSER, 0, NULL, ...);
the mapFd is the fd of sockmap.
Signed-off-by: Di Zhu <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Reviewed-by: Jakub Sitnicki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
struct fib6_node's fn_sernum field can be
read while other threads change it.
Add READ_ONCE()/WRITE_ONCE() annotations.
Do not change existing smp barriers in fib6_get_cookie_safe()
and __fib6_update_sernum_upto_root()
syzbot reported:
BUG: KCSAN: data-race in fib6_clean_node / inet6_csk_route_socket
write to 0xffff88813df62e2c of 4 bytes by task 1920 on cpu 1:
fib6_clean_node+0xc2/0x260 net/ipv6/ip6_fib.c:2178
fib6_walk_continue+0x38e/0x430 net/ipv6/ip6_fib.c:2112
fib6_walk net/ipv6/ip6_fib.c:2160 [inline]
fib6_clean_tree net/ipv6/ip6_fib.c:2240 [inline]
__fib6_clean_all+0x1a9/0x2e0 net/ipv6/ip6_fib.c:2256
fib6_flush_trees+0x6c/0x80 net/ipv6/ip6_fib.c:2281
rt_genid_bump_ipv6 include/net/net_namespace.h:488 [inline]
addrconf_dad_completed+0x57f/0x870 net/ipv6/addrconf.c:4230
addrconf_dad_work+0x908/0x1170
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:359
ret_from_fork+0x1f/0x30
read to 0xffff88813df62e2c of 4 bytes by task 15701 on cpu 0:
fib6_get_cookie_safe include/net/ip6_fib.h:285 [inline]
rt6_get_cookie include/net/ip6_fib.h:306 [inline]
ip6_dst_store include/net/ip6_route.h:234 [inline]
inet6_csk_route_socket+0x352/0x3c0 net/ipv6/inet6_connection_sock.c:109
inet6_csk_xmit+0x91/0x1e0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0x1323/0x1840 net/ipv4/tcp_output.c:1402
tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline]
tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680
__tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864
tcp_push+0x2d9/0x2f0 net/ipv4/tcp.c:725
mptcp_push_release net/mptcp/protocol.c:1491 [inline]
__mptcp_push_pending+0x46c/0x490 net/mptcp/protocol.c:1578
mptcp_sendmsg+0x9ec/0xa50 net/mptcp/protocol.c:1764
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:643
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
kernel_sendmsg+0x97/0xd0 net/socket.c:745
sock_no_sendpage+0x84/0xb0 net/core/sock.c:3086
inet_sendpage+0x9d/0xc0 net/ipv4/af_inet.c:834
kernel_sendpage+0x187/0x200 net/socket.c:3492
sock_sendpage+0x5a/0x70 net/socket.c:1007
pipe_to_sendpage+0x128/0x160 fs/splice.c:364
splice_from_pipe_feed fs/splice.c:418 [inline]
__splice_from_pipe+0x207/0x500 fs/splice.c:562
splice_from_pipe fs/splice.c:597 [inline]
generic_splice_sendpage+0x94/0xd0 fs/splice.c:746
do_splice_from fs/splice.c:767 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:936
splice_direct_to_actor+0x345/0x650 fs/splice.c:891
do_splice_direct+0x106/0x190 fs/splice.c:979
do_sendfile+0x675/0xc40 fs/read_write.c:1245
__do_sys_sendfile64 fs/read_write.c:1310 [inline]
__se_sys_sendfile64 fs/read_write.c:1296 [inline]
__x64_sys_sendfile64+0x102/0x140 fs/read_write.c:1296
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000026f -> 0x00000271
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15701 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
The Fixes tag I chose is probably arbitrary, I do not think
we need to backport this patch to older kernels.
Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When compiling the kernel with CONFIG_INET disabled, the
sk_defer_free_flush() should be defined as a nop.
This resolves the following compilation error:
ld: net/core/sock.o: in function `sk_defer_free_flush':
./include/net/tcp.h:1378: undefined reference to `__sk_defer_free_flush'
Fixes: 79074a72d335 ("net: Flush deferred skb free on socket destroy")
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Turn the CONFIG_UNICODE symbol into a tristate that generates some always
built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol.
Note that a lot of the IS_ENABLED() checks could be turned from cpp
statements into normal ifs, but this change is intended to be fairly
mechanic, so that should be cleaned up later.
Fixes: 2b3d04787012 ("unicode: Add utf8-data module")
Reported-by: Linus Torvalds <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
|
|
This patch introduces two new MGMT events for notifying the bluetoothd
whenever the controller starts/stops monitoring a device.
Test performed:
- Verified by logs that the MSFT Monitor Device is received from the
controller and the bluetoothd is notified whenever the controller
starts/stops monitoring a device.
Signed-off-by: Manish Mandlik <[email protected]>
Reviewed-by: Miao-chen Chou <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Whenever the controller starts/stops monitoring a bt device, it sends
MSFT Monitor Device event. Add handler to read this vendor event.
Test performed:
- Verified by logs that the MSFT Monitor Device event is received from
the controller whenever it starts/stops monitoring a device.
Signed-off-by: Manish Mandlik <[email protected]>
Reviewed-by: Miao-chen Chou <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
We can get rid of all the empty stubs because all these functions call
of_property_read_variable_u{8,16,32,64}_array() which already have an
empty stub if CONFIG_OF is not defined.
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make all the smaller variants of the of_parse_phandle() static inline.
This also let us remove the empty function stubs if CONFIG_OF is not
defined.
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
[robh: move index < 0 check into __of_parse_phandle_with_args]
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|