| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The CXL "root" device, ACPI0017, is an attach point for coordinating
platform level CXL resources and is the parent device for a CXL port
topology tree. As such it has distinct locking rules relative to other
CXL subsystem objects, but because it is an ACPI device the lock class
is established well before it is given to the cxl_acpi driver.
However, the lockdep API does support changing the lock class "live" for
situations like this. Add a device_lock_set_class() helper that a driver
can use in ->probe() to set a custom lock class, and
device_lock_reset_class() to return to the default "no validate" class
before the custom lock class key goes out of scope after ->remove().
Note the helpers are all macros to support dead code elimination in the
CONFIG_PROVE_LOCKING=n case, however device_set_lock_class() still needs
#ifdef CONFIG_PROVE_LOCKING since lockdep_match_class() explicitly does
not have a helper in the CONFIG_PROVE_LOCKING=n case (see comment in
lockdep.h). The lockdep API needs 2 small tweaks to prevent "unused"
warnings for the @key argument to lock_set_class(), and a new
lock_set_novalidate_class() is added to supplement
lockdep_set_novalidate_class() in the cases where the lock class is
converted while the lock is held.
Suggested-by: Peter Zijlstra <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Alison Schofield <[email protected]>
Cc: Vishal Verma <[email protected]>
Cc: Ben Widawsky <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Link: https://lore.kernel.org/r/165100081305.1528964.11138612430659737238.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as
applicable to CXL-enabled platforms. Advertise support for the CXL
features we support - 'CXL 2.0 port/device register access', 'Protocol
Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL
Memory Error Reporting'. The requests are dependent on CONFIG_* based
prerequisites, and prior PCI enabling, similar to how the standard PCI
_OSC bits are determined.
The CXL specification does not define any additional constraints on
the hotplug flow beyond PCIe native hotplug, so a kernel that supports
native PCIe hotplug, supports CXL hotplug. For error handling protocol
and link errors just use PCIe AER. There is nascent support for
amending AER events with CXL specific status [1], but there's
otherwise no additional OS responsibility for CXL errors beyond PCIe
AER. CXL Memory Errors behave the same as typical memory errors so
CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform
firmware.
[1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/
Cc: Bjorn Helgaas <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Robert Moore <[email protected]>
Cc: Dan Williams <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Davidlohr Bueso <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
OB In preparation for negotiating OS control of CXL _OSC features, do the
minimal enabling to use CXL _OSC to handle the base PCIe feature
negotiation. Recall that CXL _OSC is a super-set of PCIe _OSC and the
CXL 2.0 specification mandates: "If a CXL Host Bridge device exposes CXL
_OSC, CXL aware OSPM shall evaluate CXL _OSC and not evaluate PCIe
_OSC."
Rather than pass a boolean flag alongside @root to all the helper
functions that need to consider PCIe specifics, add is_pcie() and
is_cxl() helper functions to check the flavor of @root. This also
allows for dynamic fallback to PCIe _OSC in cases where an attempt to
use CXL _OXC fails. This can happen on CXL 1.1 platforms that publish
ACPI0016 devices to indicate CXL host bridges, but do not publish the
optional CXL _OSC method. CXL _OSC is mandatory for CXL 2.0 hosts.
Cc: Bjorn Helgaas <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Robert Moore <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Davidlohr Bueso <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
During _OSC negotiation, when the 'Control' DWORD is needed from the
result buffer after running _OSC, a couple of places performed manual
pointer arithmetic to offset into the right spot in the raw buffer.
Add a acpi_osc_ctx_get_pci_control() helper to use the #define'd
DWORD offsets to fetch the DWORDs needed from @acpi_osc_context, and
replace the above instances of the open-coded arithmetic.
Cc: "Rafael J. Wysocki" <[email protected]>
Suggested-by: Davidlohr Bueso <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Davidlohr Bueso <[email protected]>
Reviewed by: Adam Manzanares <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Acked-by: Marc Kleine-Budde <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
include/linux/netdevice.h
net/core/dev.c
6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats")
794c24e9921f ("net-core: rx_otherhost_dropped to core_stats")
https://lore.kernel.org/all/[email protected]/
drivers/net/wan/cosa.c
d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()")
89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards")
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file"
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
|
|
The sc8280xp has 13 power-domains controlled through the RPMh, document
the compatible and provide definitions for the power-domains - and their
active-only variants where applicable.
The SA8540p differs slightly in the power domains exposed, so add a
separate compatible for this, but reuse the constants to allow sharing
the DeviceTree source.
Signed-off-by: Bjorn Andersson <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
As part of a previous discussion with Jonathan Cameron [1], it appeared
necessary to clarify the meaning of each mode so that new developers
could understand better what they should use or not use and when.
The idea of renaming these modes as been let aside because naming is a
big deal and requires a lot of thinking. So for now let's focus on
correctly explaining what each mode implies.
[1] https://lore.kernel.org/linux-iio/20210930165510.2295e6c4@jic23-huawei/
Suggested-by: Jonathan Cameron <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add SCMI v3.1 voltage protocol support for asynchronous VOLTAGE_LEVEL_SET
command.
Note that, if a voltage domain is advertised to support the asynchronous
version of VOLTAGE_LEVEL_SET, the command will be issued asynchronously
unless explicitly requested to use the synchronous version by setting the
mode to SCMI_VOLTAGE_LEVEL_SET_SYNC when calling voltage_ops->level_set.
The SCMI regulator driver level_set invocation has been left unchanged
so that it will transparently use the asynchronous version if available.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add SCMI v3.1 clock pre and post notifications.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Using the common protocol helper implementation add support for all new
SCMIv3.1 extended names commands related to all protocols with the
exception of SENSOR_AXIS_GET_NAME.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
A few protocol operations are available that returns a pointer to an
internal character array representing resource name. Make those functions
return a const pointer to such array.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
While the comment was correct that this flag was intended to convey the
block no-snoop support in the IOMMU, it has become widely implemented and
used to mean the IOMMU supports IOMMU_CACHE as a map flag. Only the Intel
driver was different.
Now that the Intel driver is using enforce_cache_coherency() update the
comment to make it clear that IOMMU_CAP_CACHE_COHERENCY is only about
IOMMU_CACHE. Fix the Intel driver to return true since IOMMU_CACHE always
works.
The two places that test this flag, usnic and vdpa, are both assigning
userspace pages to a driver controlled iommu_domain and require
IOMMU_CACHE behavior as they offer no way for userspace to synchronize
caches.
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Lu Baolu <[email protected]>
Acked-by: Robin Murphy <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
IOMMU_CACHE means "normal DMA to this iommu_domain's IOVA should be cache
coherent" and is used by the DMA API. The definition allows for special
non-coherent DMA to exist - ie processing of the no-snoop flag in PCIe
TLPs - so long as this behavior is opt-in by the device driver.
The flag is mainly used by the DMA API to synchronize the IOMMU setting
with the expected cache behavior of the DMA master. eg based on
dev_is_dma_coherent() in some case.
For Intel IOMMU IOMMU_CACHE was redefined to mean 'force all DMA to be
cache coherent' which has the practical effect of causing the IOMMU to
ignore the no-snoop bit in a PCIe TLP.
x86 platforms are always IOMMU_CACHE, so Intel should ignore this flag.
Instead use the new domain op enforce_cache_coherency() which causes every
IOPTE created in the domain to have the no-snoop blocking behavior.
Reconfigure VFIO to always use IOMMU_CACHE and call
enforce_cache_coherency() to operate the special Intel behavior.
Remove the IOMMU_CACHE test from Intel IOMMU.
Ultimately VFIO plumbs the result of enforce_cache_coherency() back into
the x86 platform code through kvm_arch_register_noncoherent_dma() which
controls if the WBINVD instruction is available in the guest. No other
archs implement kvm_arch_register_noncoherent_dma() nor are there any
other known consumers of VFIO_DMA_CC_IOMMU that might be affected by the
user visible result change on non-x86 archs.
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Lu Baolu <[email protected]>
Acked-by: Alex Williamson <[email protected]>
Acked-by: Robin Murphy <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
This new mechanism will replace using IOMMU_CAP_CACHE_COHERENCY and
IOMMU_CACHE to control the no-snoop blocking behavior of the IOMMU.
Currently only Intel and AMD IOMMUs are known to support this
feature. They both implement it as an IOPTE bit, that when set, will cause
PCIe TLPs to that IOVA with the no-snoop bit set to be treated as though
the no-snoop bit was clear.
The new API is triggered by calling enforce_cache_coherency() before
mapping any IOVA to the domain which globally switches on no-snoop
blocking. This allows other implementations that might block no-snoop
globally and outside the IOPTE - AMD also documents such a HW capability.
Leave AMD out of sync with Intel and have it block no-snoop even for
in-kernel users. This can be trivially resolved in a follow up patch.
Only VFIO needs to call this API because it does not have detailed control
over the device to avoid requesting no-snoop behavior at the device
level. Other places using domains with real kernel drivers should simply
avoid asking their devices to set the no-snoop bit.
Reviewed-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Acked-by: Robin Murphy <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
With no users of hv_pkt_iter_next_raw() and no "external" users of
hv_pkt_iter_first_raw(), the iterator functions can be refactored
and simplified to remove some indirection/code.
Signed-off-by: Andrea Parri (Microsoft) <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
So that isolated guests can communicate with the host via hv_sock
channels.
Signed-off-by: Andrea Parri (Microsoft) <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
For additional robustness in the face of Hyper-V errors or malicious
behavior, validate all values that originate from packets that Hyper-V
has sent to the guest in the host-to-guest ring buffer. Ensure that
invalid values cannot cause data being copied out of the bounds of the
source buffer in hvs_stream_dequeue().
Signed-off-by: Andrea Parri (Microsoft) <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
Similar to the addition of lookup_one() add a version of
lookup_one_unlocked() and lookup_one_positive_unlocked() that take
idmapped mounts into account. This is required to port overlay to
support idmapped base layers.
Cc: <[email protected]>
Tested-by: Giuseppe Scrivano <[email protected]>
Reviewed-by: Amir Goldstein <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
The iommu group changes notifer is not referenced in the tree. Remove it
to avoid dead code.
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The devices on platform/amba/fsl-mc/PCI buses could be bound to drivers
with the device DMA managed by kernel drivers or user-space applications.
Unfortunately, multiple devices may be placed in the same IOMMU group
because they cannot be isolated from each other. The DMA on these devices
must either be entirely under kernel control or userspace control, never
a mixture. Otherwise the driver integrity is not guaranteed because they
could access each other through the peer-to-peer accesses which by-pass
the IOMMU protection.
This checks and sets the default DMA mode during driver binding, and
cleanups during driver unbinding. In the default mode, the device DMA is
managed by the device driver which handles DMA operations through the
kernel DMA APIs (see Documentation/core-api/dma-api.rst).
For cases where the devices are assigned for userspace control through the
userspace driver framework(i.e. VFIO), the drivers(for example, vfio_pci/
vfio_platfrom etc.) may set a new flag (driver_managed_dma) to skip this
default setting in the assumption that the drivers know what they are
doing with the device DMA.
Calling iommu_device_use_default_domain() before {of,acpi}_dma_configure
is currently a problem. As things stand, the IOMMU driver ignored the
initial iommu_probe_device() call when the device was added, since at
that point it had no fwspec yet. In this situation,
{of,acpi}_iommu_configure() are retriggering iommu_probe_device() after
the IOMMU driver has seen the firmware data via .of_xlate to learn that
it actually responsible for the given device. As the result, before
that gets fixed, iommu_use_default_domain() goes at the end, and calls
arch_teardown_dma_ops() if it fails.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Stuart Yoder <[email protected]>
Cc: Laurentiu Tudor <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Tested-by: Eric Auger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Stop sharing platform_dma_configure() helper as they are about to have
their own bus dma_configure callbacks.
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The bus_type structure defines dma_configure() callback for bus drivers
to configure DMA on the devices. This adds the paired dma_cleanup()
callback and calls it during driver unbinding so that bus drivers can do
some cleanup work.
One use case for this paired DMA callbacks is for the bus driver to check
for DMA ownership conflicts during driver binding, where multiple devices
belonging to a same IOMMU group (the minimum granularity of isolation and
protection) may be assigned to kernel drivers or user space respectively.
Without this change, for example, the vfio driver has to listen to a bus
BOUND_DRIVER event and then BUG_ON() in case of dma ownership conflict.
This leads to bad user experience since careless driver binding operation
may crash the system if the admin overlooks the group restriction. Aside
from bad design, this leads to a security problem as a root user, even with
lockdown=integrity, can force the kernel to BUG.
With this change, the bus driver could check and set the DMA ownership in
driver binding process and fail on ownership conflicts. The DMA ownership
should be released during driver unbinding.
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Multiple devices may be placed in the same IOMMU group because they
cannot be isolated from each other. These devices must either be
entirely under kernel control or userspace control, never a mixture.
This adds dma ownership management in iommu core and exposes several
interfaces for the device drivers and the device userspace assignment
framework (i.e. VFIO), so that any conflict between user and kernel
controlled dma could be detected at the beginning.
The device driver oriented interfaces are,
int iommu_device_use_default_domain(struct device *dev);
void iommu_device_unuse_default_domain(struct device *dev);
By calling iommu_device_use_default_domain(), the device driver tells
the iommu layer that the device dma is handled through the kernel DMA
APIs. The iommu layer will manage the IOVA and use the default domain
for DMA address translation.
The device user-space assignment framework oriented interfaces are,
int iommu_group_claim_dma_owner(struct iommu_group *group,
void *owner);
void iommu_group_release_dma_owner(struct iommu_group *group);
bool iommu_group_dma_owner_claimed(struct iommu_group *group);
The device userspace assignment must be disallowed if the DMA owner
claiming interface returns failure.
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Kevin Tian <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Unfortunately, the name/value choice for the MTE ELF segment type
(PT_ARM_MEMTAG_MTE) was pretty poor: LOPROC+1 is already in use by
PT_AARCH64_UNWIND, as defined in the AArch64 ELF ABI
(https://github.com/ARM-software/abi-aa/blob/main/aaelf64/aaelf64.rst).
Update the ELF segment type value to LOPROC+2 and also change the define
to PT_AARCH64_MEMTAG_MTE to match the AArch64 ELF ABI namespace. The
AArch64 ELF ABI document is updating accordingly (segment type not
previously mentioned in the document).
Signed-off-by: Catalin Marinas <[email protected]>
Fixes: 761b9b366cec ("elf: Introduce the ARM MTE ELF segment type")
Cc: Will Deacon <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Luis Machado <[email protected]>
Cc: Richard Earnshaw <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Fix the following warnings seen with "make W=1":
kernel/sysctl.c:183:13: warning: no previous prototype for ‘unpriv_ebpf_notify’ [-Wmissing-prototypes]
183 | void __weak unpriv_ebpf_notify(int new_state)
| ^~~~~~~~~~~~~~~~~~
arch/x86/kernel/cpu/bugs.c:659:6: warning: no previous prototype for ‘unpriv_ebpf_notify’ [-Wmissing-prototypes]
659 | void unpriv_ebpf_notify(int new_state)
| ^~~~~~~~~~~~~~~~~~
Fixes: 44a3918c8245 ("x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/5689d065f739602ececaee1e05e68b8644009608.1650930000.git.jpoimboe@redhat.com
|
|
Between me trying to get rid of iommu_present() and Mario wanting to
support the AMD equivalent of DMAR_PLATFORM_OPT_IN, scrutiny has shown
that the iommu_dma_protection attribute is being far too optimistic.
Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device(s)
we care about. Furthermore, all that DMAR_PLATFORM_OPT_IN really does
is tell us that memory was protected before the kernel was loaded, and
prevent the user from disabling the intel-iommu driver entirely. While
that lets us assume kernel integrity, what matters for actual runtime
DMA protection is whether we trust individual devices, based on the
"external facing" property that we expect firmware to describe for
Thunderbolt ports.
It's proven challenging to determine the appropriate ports accurately
given the variety of possible topologies, so while still not getting a
perfect answer, by putting enough faith in firmware we can at least get
a good bit closer. If we can see that any device near a Thunderbolt NHI
has all the requisites for Kernel DMA Protection, chances are that it
*is* a relevant port, but moreover that implies that firmware is playing
the game overall, so we'll use that to assume that all Thunderbolt ports
should be correctly marked and thus will end up fully protected.
CC: Mario Limonciello <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/b153f208bc9eafab5105bad0358b77366509d2d4.1650878781.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <[email protected]>
|
|
VT-d's dmar_platform_optin() actually represents a combination of
properties fairly well standardised by Microsoft as "Pre-boot DMA
Protection" and "Kernel DMA Protection"[1]. As such, we can provide
interested consumers with an abstracted capability rather than
driver-specific interfaces that won't scale. We name it for the former
aspect since that's what external callers are most likely to be
interested in; the latter is for the IOMMU layer to handle itself.
[1] https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/oem-kernel-dma-protection
Suggested-by: Christoph Hellwig <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Lu Baolu <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/d6218dff2702472da80db6aec2c9589010684551.1650878781.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <[email protected]>
|
|
iommu_capable() only really works for systems where all IOMMU instances
are completely homogeneous, and all devices are IOMMU-mapped. Implement
the new variant which will be able to give a more accurate answer for
whichever device the caller is actually interested in, and even more so
once all the external users have been converted and we can reliably pass
the device pointer through the internal driver interface too.
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/8407eb9586677995b7a9fd70d0fd82d85929a9bb.1650878781.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression causing some HCI events to be discarded when they
shouldn't.
* tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to
check correct value") buffered writes fail on S29GL064N. This is
because, on S29GL064N, reads return 0xFF at the end of DQ polling for
write completion, where as, chip_good() check expects actual data
written to the last location to be returned post DQ polling completion.
Fix is to revert to using chip_good() for S29GL064N which only checks
for DQ lines to settle down to determine write completion.
Link: https://lore.kernel.org/r/[email protected]/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Cc: [email protected]
Signed-off-by: Tokunori Ikegami <[email protected]>
Acked-by: Vignesh Raghavendra <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- GuC hwconfig support and query (John Harrison, Rodrigo Vivi, Tvrtko Ursulin)
- Sysfs support for multi-tile devices (Andi Shyti, Sujaritha Sundaresan)
- Per client GPU utilisation via fdinfo (Tvrtko Ursulin, Ashutosh Dixit)
- Add DRM_I915_QUERY_GEOMETRY_SUBSLICES (Matt Atwood)
Cross-subsystem Changes:
- Add GSC as a MEI auxiliary device (Tomas Winkler, Alexander Usyskin)
Core Changes:
- Document fdinfo format specification (Tvrtko Ursulin)
Driver Changes:
- Fix prime_mmap to work when using LMEM (Gwan-gyeong Mun)
- Fix vm open count and remove vma refcount (Thomas Hellström)
- Fixup setting screen_size (Matthew Auld)
- Opportunistically apply ALLOC_CONTIGIOUS (Matthew Auld)
- Limit where we apply TTM_PL_FLAG_CONTIGUOUS (Matthew Auld)
- Drop aux table invalidation on FlatCCS platforms (Matt Roper)
- Add missing boundary check in vm_access (Mastan Katragadda)
- Update topology dumps for Xe_HP (Matt Roper)
- Add support for steered register writes (Matt Roper)
- Add steering info to GuC register save/restore list (Daniele Ceraolo Spurio)
- Small PCI BAR enabling (Matthew Auld, Akeem G Abodunrin, CQ Tang)
- Add preemption changes for Wa_14015141709 (Akeem G Abodunrin)
- Add logical mapping for video decode engines (Matthew Brost)
- Don't evict unmappable VMAs when pinning with PIN_MAPPABLE (v2) (Vivek Kasireddy)
- GuC error capture support (Alan Previn, Daniele Ceraolo Spurio)
- avoid concurrent writes to aux_inv (Fei Yang)
- Add Wa_22014226127 (José Roberto de Souza)
- Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL (Matt Roper)
- Evict and restore of compressed objects (Ramalingam C)
- Update to GuC version 70.1.1 (John Harrison)
- Add Wa_22011802037 force cs halt (Tilak Tangudu)
- Enable Wa_22011802037 for gen12 GuC based platforms (Umesh Nerlige Ramappa)
- GuC based workarounds for DG2 (Vinay Belgaumkar, John Harrison, Matthew Brost, José Roberto de Souza)
- consider min_page_size when migrating (Matthew Auld)
- Prep work for next GuC firmware release (John Harrison)
- Support platforms with CCS engines but no RCS (Matt Roper, Stuart Summers)
- Don't overallocate subslice storage (Matt Roper)
- Reduce stack usage in debugfs due to SSEU (John Harrison)
- Report steering details in debugfs (Matt Roper)
- Refactor some x86-ism out to prepare for non-x86 builds (Michael Cheng)
- add lmem_size modparam (CQ Tang)
- Refactor for non-x86 driver builds (Casey Bowman)
- Centralize computation of freq caps (Ashutosh Dixit)
- Update dma_buf_ops.unmap_dma_buf callback to use drm_gem_unmap_dma_buf() (Gwan-gyeong Mun)
- Limit the async bind to bind_async_flags (Matthew Auld)
- Stop checking for NULL vma->obj (Matthew Auld)
- Reduce overzealous alignment constraints for GGTT (Matthew Auld)
- Remove GEN12_SFC_DONE_MAX from register defs header (Matt Roper)
- Fix renamed struct field (Lucas De Marchi)
- Do not return '0' if there is nothing to return (Andi Shyti)
- fix i915_reg_t initialization (Jani Nikula)
- move the migration sanity check (Matthew Auld)
- handle more rounding in selftests (Matthew Auld)
- Perf and i915 query kerneldoc updates (Matt Roper)
- Use i915_probe_error instead of drm_err (Vinay Belgaumkar)
- sanity check object size in the buddy allocator (Matthew Auld)
- fixup selftests min_alignment usage (Matthew Auld)
- tweak selftests misaligned_case (Matthew Auld)
Signed-off-by: Dave Airlie <[email protected]>
# Conflicts:
# drivers/gpu/drm/i915/i915_vma.c
From: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/Ymkfy8FjsG2JrodK@tursulin-mobl2
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.19-2022-04-15:
amdgpu:
- USB-C updates
- GPUVM updates
- TMZ fixes for RV
- DCN 3.1 pstate fixes
- Display z state fixes
- RAS fixes
- Misc code cleanups and spelling fixes
- More DC FP rework
- GPUVM TLB handling rework
- Power management sysfs code cleanup
- Add RAS support for VCN
- Backlight fix
- Add unique id support for more asics
- Misc display updates
- SR-IOV fixes
- Extend CG and PG flags to 64 bits
- Enable VCN clk sysfs nodes for navi12
amdkfd:
- Fix IO link cleanup during device removal
- RAS fixes
- Retry fault fixes
- Asynchronously free events
- SVM fixes
radeon:
- Drop some dead code
- Misc code cleanups
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dave Airlie <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The IDs added here are the subset reserved for 'motherboard down'
designs of DG2. We have all the necessary support upstream to enable
these now (although they'll continue to require force_probe until the
usual requirements are met).
The remaining DG2 IDs for add-in cards will come in a future patch once
some additional required functionality has fully landed.
Bspec: 44477
Cc: Lucas De Marchi <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2022-04-27
We've added 5 non-merge commits during the last 20 day(s) which contain
a total of 6 files changed, 34 insertions(+), 12 deletions(-).
The main changes are:
1) Fix xsk sockets when rx and tx are separately bound to the same umem, also
fix xsk copy mode combined with busy poll, from Maciej Fijalkowski.
2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered
a crash due to invalid metadata_dst access, from Eyal Birger.
3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen.
4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki.
(Masami & Steven preferred this small fix to be routed via bpf tree given it's
follow-up fix to Masami's rethook work that went via bpf earlier, too.)
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Fix possible crash when multiple sockets are created
kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set
bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
bpf: Fix release of page_pool in BPF_PROG_RUN in test runner
xsk: Fix l2fwd for copy mode + busy poll combo
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are no more users for acpi_release_memory().
Signed-off-by: Heikki Krogerus <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The frequency invariance infrastructure provides the APERF/MPERF samples
already. Utilize them for the cpu frequency display in /proc/cpuinfo.
The sample is considered valid for 20ms. So for idle or isolated NOHZ full
CPUs the function returns 0, which is matching the previous behaviour.
This gets rid of the mass IPIs and a delay of 20ms for stabilizing observed
by Eric when reading /proc/cpuinfo.
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Eric Dumazet <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The function hex2bin is used to load cryptographic keys into device
mapper targets dm-crypt and dm-integrity. It should take constant time
independent on the processed data, so that concurrently running
unprivileged code can't infer any information about the keys via
microarchitectural convert channels.
This patch changes the function hex_to_bin so that it contains no
branches and no memory accesses.
Note that this shouldn't cause performance degradation because the size
of the new function is the same as the size of the old function (on
x86-64) - and the new function causes no branch misprediction penalties.
I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64
i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32
sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64
powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are
no branches in the generated code.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"Core fix:
- Fix a possible data corruption of the 'part' field in mtd_info
Rawnand fixes:
- Fix the check on the return value of wait_for_completion_timeout
- Fix wrong ECC parameters for mt7622
- Fix a possible memory corruption that might panic in the Qcom
driver"
* tag 'mtd/fixes-for-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: qcom: fix memory corruption that causes panic
mtd: fix 'part' field data corruption in mtd_info
mtd: rawnand: Fix return value check of wait_for_completion_timeout
mtd: rawnand: fix ecc parameters for mt7622
|
|
Mediatek ECC changes:
* Also parse the default nand-ecc-engine property if available
* Make mtk_ecc.c a separated module
needed for SPI controller driver
|
|
Mediatek ECC changes:
* Also parse the default nand-ecc-engine property if available
* Make mtk_ecc.c a separated module
Signed-off-by: Miquel Raynal <[email protected]>
|
|
this code will be used in mediatek snfi spi-mem controller with
pipelined ECC engine.
Signed-off-by: Chuanhong Guo <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas
said:
Its's simply wishful thinking that stuff gets fixed because of a
WARN_ONCE(). This has never worked. The only thing which works is to
make stuff fail hard or slow it down in a way which makes it annoying
enough to users to complain.
He was talking about WBINVD. But it made me think about how we use the
split lock detection feature in Linux.
Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process
keep running with split lock detection disabled
3) Kill process that use split locks
Option 2 falls into the "wishful thinking" territory that Thomas warns does
nothing. But option 3 might not be viable in a situation with legacy
applications that need to run.
Hence make option 2 much stricter to "slow it down in a way which makes
it annoying".
Primary reason for this change is to provide better quality of service to
the rest of the applications running on the system. Internal testing shows
that even with many processes splitting locks, performance for the rest of
the system is much more responsive.
The new "warn" mode operates like this. When an application tries to
execute a bus lock the #AC handler.
1) Delays (interruptibly) 10 ms before moving to next step.
2) Blocks (interruptibly) until it can get the semaphore
If interrupted, just return. Assume the signal will either
kill the task, or direct execution away from the instruction
that is trying to get the bus lock.
3) Disables split lock detection for the current core
4) Schedules a work queue to re-enable split lock detect in 2 jiffies
5) Returns
The work queue that re-enables split lock detection also releases the
semaphore.
There is a corner case where a CPU may be taken offline while split lock
detection is disabled. A CPU hotplug handler handles this case.
Old behaviour was to only print the split lock warning on the first
occurrence of a split lock from a task. Preserve that by adding a flag to
the task structure that suppresses subsequent split lock messages from that
task.
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
As functions prototypes regerdless of CONFIG options as well as some
code depend on structures defined in sound/intel-nhlt.h header, move
them out of #define block. This allows to compile code depending on
mentioned header with "depends on ACPI || COMPILE_TEST" in Kconfig.
Fixes: 47a1886a610a ("ASoC: Intel: avs: Enable AVS driver only on x86 platforms")
Reported-by: kernel test robot <[email protected]>
Suggested-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Cezary Rojewski <[email protected]>
Signed-off-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Commit a0f84dfb3f6d9 ("ASoC: SOF: IPC: dai: Expand DAI_CONFIG IPC flags")
did not update the SOF_ABI_MINOR, bump to version 20 before new
changes are added.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This driver received nothing but automated fixes in the last 15 years.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When ACPI table includes _PLD fields for a device, create a new
directory (physical_location) in sysfs to share _PLD fields.
Currently without PLD information, when there are multiple of same
devices, it is hard to distinguish which device corresponds to which
physical device at which location. For example, when there are two Type
C connectors, it is hard to find out which connector corresponds to the
Type C port on the left panel versus the Type C port on the right panel.
With PLD information provided, we can determine which specific device at
which location is doing what.
_PLD output includes much more fields, but only generic fields are added
and exposed to sysfs, so that non-ACPI devices can also support it in
the future. The minimal generic fields needed for locating a device are
the following.
- panel
- vertical_position
- horizontal_position
- dock
- lid
Signed-off-by: Won Chung <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The macro dev_core_stats_##FIELD##_inc() disables preemption and invokes
netdev_core_stats_alloc() to return a per-CPU pointer.
netdev_core_stats_alloc() will allocate memory on its first invocation
which breaks on PREEMPT_RT because it requires non-atomic context for
memory allocation.
This can be avoided by enabling preemption in netdev_core_stats_alloc()
assuming the caller always disables preemption.
It might be better to replace local_inc() with this_cpu_inc() now that
dev_core_stats_##FIELD##_inc() gained a preempt-disable section and does
not rely on already disabled preemption. This results in less
instructions on x86-64:
local_inc:
| incl %gs:__preempt_count(%rip) # __preempt_count
| movq 488(%rdi), %rax # _1->core_stats, _22
| testq %rax, %rax # _22
| je .L585 #,
| add %gs:this_cpu_off(%rip), %rax # this_cpu_off, tcp_ptr__
| .L586:
| testq %rax, %rax # _27
| je .L587 #,
| incq (%rax) # _6->a.counter
| .L587:
| decl %gs:__preempt_count(%rip) # __preempt_count
this_cpu_inc(), this patch:
| movq 488(%rdi), %rax # _1->core_stats, _5
| testq %rax, %rax # _5
| je .L591 #,
| .L585:
| incq %gs:(%rax) # _18->rx_dropped
Use unsigned long as type for the counter. Use this_cpu_inc() to
increment the counter. Use a plain read of the counter.
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|