| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When the caller doesn't pass a destination fs_core will create a unused
rule just so a context can be returned. This unused rule
is zeroed out and its type is 0 which can be mixed up with
MLX5_FLOW_DESTINATION_TYPE_VPORT.
Create a dedicated type to differentiate between the two
named MLX5_FLOW_DESTINATION_TYPE_NONE.
Signed-off-by: Mark Bloch <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Separate flow destinations between software and IFC.
Flow destination type passed by callers was used as the input in
firmware commands and over the years software only types were added
which resulted in mixing between the two.
Create an IFC enum that contains only the flow destinations defined
when talking to the firmware.
Now that there is a proper software only enum for flow destinations
the hardcoded values can be removed as the values are no longer used
in firmware commands.
Signed-off-by: Mark Bloch <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Commit 2f187bfa6f35 ("net: ethernet: ocelot: remove the need for num_stats
initializer") added a macro that patchwork warned it lacked parentheses
around an argument. Correct this mistake.
Fixes: 2f187bfa6f35 ("net: ethernet: ocelot: remove the need for num_stats initializer")
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 2f187bfa6f35 ("net: ethernet: ocelot: remove the need for num_stats
initializer") added a flags field to the ocelot stats structure. The same
behavior can be achieved without this additional field taking up extra
memory.
Remove this structure element to free up RAM
Suggested-by: Vladimir Oltean <[email protected]>
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add support for management applications to send an MPI3 Encapsulated NVMe
passthru command to the NVMe devices attached to an Avenger controller.
Since the NVMe drives are exposed as SCSI devices by the controller, the
standard NVMe applications cannot be used to interact with the drives and
the command sets supported are also limited by the controller firmware.
Special handling is required for MPI3 Encapsulated NVMe passthru commands
for PRP/SGL setup in the commands.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Sumit Saxena <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This patch moves the data structures/definitions which are used by
userspace applications from MPI headers to uapi/scsi/scsi_bsg_mpi3mr.h
Link: https://lore.kernel.org/r/[email protected]
Reported by: Stephen Rothwell <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Sumit Saxena <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
There are certain bsg commands which need to be completed by the driver
without involving firmware. These requests are termed driver commands. Add
support for these.
Link: https://lore.kernel.org/r/[email protected]
Reported by: Stephen Rothwell <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Sumit Saxena <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The SCSI disk driver consults VPD pages b0 (Block Limits), b1 (Block Device
Characteristics), and b2 (Logical Block Provisioning). Instead of having
sd.c request these pages every revalidate cycle, cache them along with the
other commonly used VPDs.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
We currently default to 255 bytes when fetching VPD pages during discovery.
However, we have had a few devices that are known to wedge if the requested
buffer exceeds a certain size. See commit af73623f5f10 ("[SCSI] sd: Reduce
buffer size for vpd request") which works around one example of this
problem in the SCSI disk driver.
With commit d188b0675b21 ("scsi: core: Add sysfs attributes for VPD pages
0h and 89h") we now risk triggering the same issue in the generic midlayer
code.
The problem with the ATA VPD page in particular is that the SCSI portion of
the page is trailed by 512 bytes of verbatim ATA Identify Device
information. However, not all controllers actually provide the additional
512 bytes and will lock up if one asks for more than the 64 bytes
containing the SCSI protocol fields.
Instead of picking a new, somewhat arbitrary, number of bytes for the VPD
buffer size, start fetching the 4-byte header for each page. The header
contains the size of the page as far as the device is concerned. We can use
the reported size to specify the correct allocation length when
subsequently fetching the full page.
The header validation is done by a new helper function scsi_get_vpd_size()
and both scsi_get_vpd_page() and scsi_get_vpd_buf() now rely on this to
query the page size.
In addition, scsi_get_vpd_page() is simplified to mirror the logic in
scsi_get_vpd_page(). This involves removing the Supported VPD Pages lookup
prior to attempting to query a page. There does not appear any evidence,
even in the oldest SCSI specs, that this step is required. We already rely
on scsi_get_vpd_page() throughout the stack and this function never
consulted the Supported VPD Pages. Since this has not caused any problems
it should be safe to remove the precondition from scsi_get_vpd_page().
Instrumented runs also revealed that the Supported VPD Pages lookup had
little effect since the device page index often was larger than the
supplied buffer size. As a result, inquiries frequently bypassed the index
check and went through the "If we ran off the end of the buffer, give us
the benefit of the doubt" code path which assumed the page was present
despite not being listed. The revised code takes both the page size
reported by the device as well as the size of the buffer provided by the
scsi_get_vpd_page() caller into account.
Link: https://lore.kernel.org/r/[email protected]
Fixes: d188b0675b21 ("scsi: core: Add sysfs attributes for VPD pages 0h and 89h")
Reported-by: Maciej W. Rozycki <[email protected]>
Tested-by: Maciej W. Rozycki <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
====================
pull-request: ieee802154-next 2022-05-01
Miquel Raynal landed two patch series bundled in this pull request.
The first series re-works the symbol duration handling to better
accommodate the needs of the various phy layers in ieee802154.
In the second series Miquel improves th errors handling from drivers
up mac802154. THis streamlines the error handling throughout the
ieee/mac802154 stack in preparation for sync TX to be introduced for
MLME frames.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
kthread_blkcg is only used by the built-in blk-cgroup code.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Remove all the includes that aren't actually needed from
<linux/blk-cgroup.h> and push them to the actual source files where
needed.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
No need to make BLK_CGROUP stubs conditional on CONFIG_BLOCK as they
can't be used without that.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
All callers of bio_blkcg actually want the CSS, so replace it with an
interface that does return the CSS. This now allows to move
struct blkcg_gq to block/blk-cgroup.h instead of exposing it in a
public header.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pass the cgroup_subsys_state instead of a the blkg so that blktrace
doesn't need to poke into blk-cgroup internals, and give the name a
blk prefix as the current name is way too generic for a public
interface.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
There is no real need to expose the blkcg structure to the whole kernel.
Move it to the private header an expose a helper to let the writeback
code access the cgwb_list member.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Move these two functions out of line as there is no good reason
to inline them. Also switch to passing a cgroup_subsys_state
instead of doing the conversion in the caller to prepare for making
the blkcg structure private to blk-cgroup.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
There is no urgent need to inline this function, so move it out of line.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
No need to have these helpers inline. Also remove the stubs and just use
an IS_ENABLED for the get side (the set side already is only built
conditionlly).
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
KUnit has support for setup/cleanup logic for each test case in a suite.
But it lacks the ability to specify setup/cleanup for the entire suite
itself.
This can be used to do setup that is too expensive or cumbersome to do
for each test.
Or it can be used to do simpler things like log debug information after
the suite completes.
It's a fairly common feature, so the lack of it is noticeable.
Some examples in other frameworks and languages:
* https://docs.python.org/3/library/unittest.html#setupclass-and-teardownclass
* https://google.github.io/googletest/reference/testing.html#Test::SetUpTestSuite
Meta:
This is very similar to this patch here: https://lore.kernel.org/linux-kselftest/[email protected]/
The changes from that patch:
* pass in `struct kunit *` so users can do stuff like
`kunit_info(suite, "debug message")`
* makes sure the init failure is bubbled up as a failure
* updates kunit-example-test.c to use a suite init
* Updates kunit/usage.rst to mention the new support
* some minor cosmetic things
* use `suite_{init,exit}` instead of `{init/exit}_suite`
* make suite init error message more consistent w/ test init
* etc.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
For TDX guests, the maximum number of vcpus needs to be specified when the
TDX guest VM is initialized (creating the TDX data corresponding to TDX
guest) before creating vcpu. It needs to record the maximum number of
vcpus on VM creation (KVM_CREATE_VM) and return error if the number of
vcpus exceeds it
Because there is already max_vcpu member in arm64 struct kvm_arch, move it
to common struct kvm and initialize it to KVM_MAX_VCPUS before
kvm_arch_init_vm() instead of adding it to x86 struct kvm_arch.
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Isaku Yamahata <[email protected]>
Message-Id: <e53234cdee6a92357d06c80c03d77c19cdefb804.1646422845.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The NVMe co-processor on the Apple M1 uses a DMA address filter called
SART for some DMA transactions. This adds a simple driver used to
configure the memory regions from which DMA transactions are allowed.
Unlike a real IOMMU, SART does not support any pagetables and can't be
implemented inside the IOMMU subsystem using iommu_ops.
It also can't be implemented using dma_map_ops since not all DMA
transactions of the NVMe controller are filtered by SART.
Instead, most buffers have to be registered using the integrated NVMe
IOMMU and we can't have two separate dma_map_ops implementations for a
single device.
Co-developed-by: Hector Martin <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Hector Martin <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the kernfs/driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.19-1
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
|
|
clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
|
|
The "Extended Address Register" is winbond specific. If the flash is
larger than 16MiB and is used in 3 byte address mode, it is used to set
the remaining address bits. Move the write_ear() function, the opcode
macros and the spimem op template into the winbond module and rename
them accordingly.
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Pratyush Yadav <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
max field holds the largest slab order that was ever used for a slab cache.
But it's unused now. Remove it.
Signed-off-by: Miaohe Lin <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Acked-by: David Rientjes <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The comment next to the __assume_kmalloc_alignment definition is not
precise: kmalloc relies on kmem_cache_alloc, so kmalloc technically returns
pointers aligned to both ARCH_KMALLOC_MINALIGN and ARCH_SLAB_MINALIGN,
not only to ARCH_KMALLOC_MINALIGN.
(See create_kmalloc_cache()->create_boot_cache()->calculate_alignment()
for SLAB and SLUB and __do_kmalloc_node() for SLOB.)
Clarify the comment.
The assumption specified by __assume_kmalloc_alignment is still correct,
although it can be made stronger. I'll leave this to a separate patch.
Signed-off-by: Andrey Konovalov <[email protected]>
Acked-by: David Rientjes <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
Link: https://lore.kernel.org/r/84d8142747230f2015eaf9705ee7c2e1a9f56596.1651161548.git.andreyknvl@google.com
|
|
The comment next to the ARCH_KMALLOC_MINALIGN definition says that
ARCH_KMALLOC_MINALIGN can be defined in arch headers. This is incorrect:
it's actually ARCH_DMA_MINALIGN that can be defined there.
Fix the comment.
Signed-off-by: Andrey Konovalov <[email protected]>
Acked-by: David Rientjes <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
Link: https://lore.kernel.org/r/fe1ca7a25a054b61d1038686d07569416e287e7b.1651161548.git.andreyknvl@google.com
|
|
drm_gem_plane_helper_prepare_fb() was using
drm_atomic_set_fence_for_plane() which ignores all implicit fences when an
explicit fence is already set. That's rather unfortunate when the fb still
has a kernel fence we need to wait for to avoid presenting garbage on the
screen.
So instead update the fence in the plane state directly. While at it also
take care of all potential GEM objects and not just the first one.
Also remove the now unused drm_atomic_set_fence_for_plane() function, new
drivers should probably use the atomic helpers directly.
v2: improve kerneldoc, use local variable and num_planes, WARN_ON_ONCE
on missing planes.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]> (v1)
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For vendors drivers which pass an already allocated and
initialized encoder especially for cases where the encoder
hardware is shared OR the writeback encoder shares the resources
with the rest of the display pipeline introduce a new API,
drm_writeback_connector_init_with_encoder() which expects
an initialized encoder as a parameter and only sets up the
writeback connector.
changes in v5:
- fix the encoder doc to indicate that its not valid for
users of drm_writeback_connector_init_with_encoder()
Reviewed-by: Liviu Dudau <[email protected]>
Signed-off-by: Abhinav Kumar <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/483500/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
Clients of drm_writeback_connector_init() initialize the
possible_crtcs and then invoke the call to this API.
To simplify things, allow passing possible_crtcs as a parameter
to drm_writeback_connector_init() and make changes to the
other drm drivers to make them compatible with this change.
changes in v2:
- split the changes according to their functionality
changes in v3:
- allow passing possible_crtcs for existing users of
drm_writeback_connector_init()
- squash the vendor changes into the same commit so
that each patch in the series can compile individually
changes in v4:
- keep only changes related to possible_crtcs
- add line breaks after ARRAY_SIZE
- stop using temporary variables for possible_crtcs
changes in v5:
- None
changes in v6:
- None
changes in v7:
- wrap long lines to match the coding style of existing drivers
- Fix indentation and remove parenthesis where not needed
- use u32 instead of uint32_t for possible_crtcs
Signed-off-by: Abhinav Kumar <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/483501/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
Merge in Linux 5.18-rc5 since new code to the STM32 driver
depend in a non-trivial way on the fixes merged in -rc5.
Signed-off-by: Linus Walleij <[email protected]>
|
|
Define a function named fsverity_get_digest() to return the verity file
digest and the associated hash algorithm (enum hash_algo).
This assumes that before calling fsverity_get_digest() the file must have
been opened, which is even true for the IMA measure/appraise on file
open policy rule use case (func=FILE_CHECK). do_open() calls vfs_open()
immediately prior to ima_file_check().
Acked-by: Eric Biggers <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
|
|
This patch is needed because the BASE-T1 uses different registers
for status, control and advertisement to those already
employed in the existing phy-c45 functions.
Where required, genphy_c45 functions will now check whether
the device supports BASE-T1 and use the specific registers
instead: 45.2.7.19 BASE-T1 AN control register,
45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN
advertisement register, 45.2.7.22 BASE-T1 AN LP Base
Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control
register.
Tested-by: Oleksij Rempel <[email protected]>
Signed-off-by: Alexandru Tachici <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Added BASE-T1 AN advertisement register (Registers 7.514, 7.515, and
7.516) and BASE-T1 AN LP Base Page ability register (Registers 7.517,
7.518, and 7.519).
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Alexandru Tachici <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The 802.3gc specification defines the 10-BaseT1L link
mode for ethernet trafic on twisted wire pair.
PMA status register can be used to detect if the phy supports
2.4 V TX level and PCS control register can be used to
enable/disable PCS level loopback.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Alexandru Tachici <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add entry for the 10base-T1L full duplex mode.
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Alexandru Tachici <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Apple SoCs such as the M1 come with multiple embedded co-processors
running proprietary firmware. Communication with those is established
over a simple mailbox using the RTKit IPC protocol.
This cannot be implemented inside the mailbox subsystem since on top
of communication over channels we also need support for starting,
hibernating and resetting these co-processors. We also need to
handle shared memory allocations differently depending on the
co-processor and don't want to split that across multiple drivers.
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
|
|
Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation
of Split Header (SPH) feature is not supported for Ipv4 fragmented packet.
This SPH limitation will cause ping failure when the packets size exceed
the MTU size. For example, the issue happens once the basic ping packet
size is larger than the configured MTU size and the data is lost inside
the fragmented packet, replaced by zeros/corrupted values, and leads to
ping fail.
So, disable the Split Header for Intel platforms.
v2: Add fixes tag in commit message.
Fixes: 67afd6d1cfdf("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Cc: <[email protected]> # 5.10.x
Suggested-by: Ong, Boon Leong <[email protected]>
Signed-off-by: Mohammad Athari Bin Ismail <[email protected]>
Signed-off-by: Wong Vee Khee <[email protected]>
Signed-off-by: Tan Tee Min <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
flush_smp_call_function_queue() invokes do_softirq() which is not available
on PREEMPT_RT. flush_smp_call_function_queue() is invoked from the idle
task and the migration task with preemption or interrupts disabled.
So RT kernels cannot process soft interrupts in that context as that has to
acquire 'sleeping spinlocks' which is not possible with preemption or
interrupts disabled and forbidden from the idle task anyway.
The currently known SMP function call which raises a soft interrupt is in
the block layer, but this functionality is not enabled on RT kernels due to
latency and performance reasons.
RT could wake up ksoftirqd unconditionally, but this wants to be avoided if
there were soft interrupts pending already when this is invoked in the
context of the migration task. The migration task might have preempted a
threaded interrupt handler which raised a soft interrupt, but did not reach
the local_bh_enable() to process it. The "running" ksoftirqd might prevent
the handling in the interrupt thread context which is causing latency
issues.
Add a new function which handles this case explicitely for RT and falls
back to do_softirq() on !RT kernels. In the RT case this warns when one of
the flushed SMP function calls raised a soft interrupt so this can be
investigated.
[ tglx: Moved the RT part out of SMP code ]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
A W=1 build emits more than a dozen missing prototype warnings related to
scheduler and scheduler specific includes.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.18-rc5 for some
reported issues and new quirks. They include:
- dwc3 driver fixes
- xhci driver fixes
- typec driver fixes
- new usb-serial driver ids
- added new USB devices to existing quirk tables
- other tiny fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: phy: generic: Get the vbus supply
usb: dwc3: gadget: Return proper request status
usb: dwc3: pci: add support for the Intel Meteor Lake-P
usb: dwc3: core: Only handle soft-reset in DCTL
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
usb: misc: eud: Fix an error handling path in eud_probe()
usb: core: Don't hold the device lock while sleeping in do_proc_control()
usb: dwc3: Try usb-role-switch first in dwc3_drd_init
usb: dwc3: core: Fix tx/rx threshold settings
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
xhci: Enable runtime PM on second Alderlake controller
usb: dwc3: fix backwards compat with rockchip devices
dt-bindings: usb: samsung,exynos-usb2: add missing required reg
usb: misc: fix improper handling of refcount in uss720_probe()
USB: Fix ehci infinite suspend-resume loop issue in zhaoxin
usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant
usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY
usb: typec: ucsi: Fix role swapping
usb: typec: ucsi: Fix reuse of completion structure
usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
...
|
|
If IORING_SETUP_COOP_TASKRUN is set to use cooperative scheduling for
running task_work, then IORING_SETUP_TASKRUN_FLAG can be set so the
application can tell if task_work is pending in the kernel for this
ring. This allows use cases like io_uring_peek_cqe() to still function
appropriately, or for the task to know when it would be useful to
call io_uring_wait_cqe() to run pending events.
Reviewed-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
If this is set, io_uring will never use an IPI to deliver a task_work
notification. This can be used in the common case where a single task or
thread communicates with the ring, and doesn't rely on
io_uring_cqe_peek().
This provides a noticeable win in performance, both from eliminating
the IPI itself, but also from avoiding interrupting the submitting
task unnecessarily.
Reviewed-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Some use cases don't always need an IPI when sending a TWA_SIGNAL
notification. Add TWA_SIGNAL_NO_IPI, which is just like TWA_SIGNAL, except
it doesn't send an IPI to the target task. It merely sets
TIF_NOTIFY_SIGNAL and wakes up the task.
This can be useful in avoiding a forceful transition to the kernel if the
task is running in userspace. Depending on the task_work in question, it
may be quite fine waiting for the next reschedule or kernel enter anyway,
or the use case may even have other mechanisms for hinting to the task
that a transition may be useful. This can drive more cooperative
scheduling of task_work.
Reviewed-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|