| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix NAT support for NFPROTO_INET without layer 3 address,
from Florian Westphal.
2) Use kfree_rcu(ptr, rcu) variant in nf_tables clean_net path.
3) Use list to collect flowtable hooks to be deleted.
4) Initialize list of hook field in flowtable transaction.
5) Release hooks on error for flowtable updates.
6) Memleak in hardware offload rule commit and abort paths.
7) Early bail out in case device does not support for hardware offload.
This adds a new interface to net/core/flow_offload.c to check if the
flow indirect block list is empty.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: bail out early if hardware offload is not supported
netfilter: nf_tables: memleak flow rule from commit path
netfilter: nf_tables: release new hooks on unsupported flowtable flags
netfilter: nf_tables: always initialize flowtable hook list in transaction
netfilter: nf_tables: delete flowtable hooks via transaction list
netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path
netfilter: nat: really support inet nat without l3 address
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
it's inline and unlikely() inside of it (including the implicit one
in WARN_ON_ONCE()) suffice to convince the compiler that getting
false from check_copy_size() is unlikely.
Spotted-by: Jens Axboe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Christian Brauner (Microsoft) <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Currently, BTF only supports upto 32bit enum value with BTF_KIND_ENUM.
But in kernel, some enum indeed has 64bit values, e.g.,
in uapi bpf.h, we have
enum {
BPF_F_INDEX_MASK = 0xffffffffULL,
BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK,
BPF_F_CTXLEN_MASK = (0xfffffULL << 32),
};
In this case, BTF_KIND_ENUM will encode the value of BPF_F_CTXLEN_MASK
as 0, which certainly is incorrect.
This patch added a new btf kind, BTF_KIND_ENUM64, which permits
64bit value to cover the above use case. The BTF_KIND_ENUM64 has
the following three fields followed by the common type:
struct bpf_enum64 {
__u32 nume_off;
__u32 val_lo32;
__u32 val_hi32;
};
Currently, btf type section has an alignment of 4 as all element types
are u32. Representing the value with __u64 will introduce a pad
for bpf_enum64 and may also introduce misalignment for the 64bit value.
Hence, two members of val_hi32 and val_lo32 are chosen to avoid these issues.
The kflag is also introduced for BTF_KIND_ENUM and BTF_KIND_ENUM64
to indicate whether the value is signed or unsigned. The kflag intends
to provide consistent output of BTF C fortmat with the original
source code. For example, the original BTF_KIND_ENUM bit value is 0xffffffff.
The format C has two choices, printing out 0xffffffff or -1 and current libbpf
prints out as unsigned value. But if the signedness is preserved in btf,
the value can be printed the same as the original source code.
The kflag value 0 means unsigned values, which is consistent to the default
by libbpf and should also cover most cases as well.
The new BTF_KIND_ENUM64 is intended to support the enum value represented as
64bit value. But it can represent all BTF_KIND_ENUM values as well.
The compiler ([1]) and pahole will generate BTF_KIND_ENUM64 only if the value has
to be represented with 64 bits.
In addition, a static inline function btf_kind_core_compat() is introduced which
will be used later when libbpf relo_core.c changed. Here the kernel shares the
same relo_core.c with libbpf.
[1] https://reviews.llvm.org/D124641
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Memory about struct psi_group is allocated by default for
each cgroup even if psi_disabled is true, in this case, these
allocated memory is waste, so alloc memory for struct psi_group
only when psi_disabled is false.
Signed-off-by: Chen Wandun <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
The trace event "workqueue_queue_work" use unsigned int type for
req_cpu, cpu. This casue confusing cpu number like below log.
$ cat /sys/kernel/debug/tracing/trace
cat-317 [001] ...: workqueue_queue_work: ... req_cpu=8192 cpu=4294967295
So, change unsigned type to signed type in the trace event. After
applying this patch, cpu number will be printed as -1 instead of
4294967295 as folllows.
$ cat /sys/kernel/debug/tracing/trace
cat-1338 [002] ...: workqueue_queue_work: ... req_cpu=8192 cpu=-1
Cc: Baik Song An <[email protected]>
Cc: Hong Yeon Kim <[email protected]>
Cc: Taeung Song <[email protected]>
Cc: [email protected]
Signed-off-by: Wonhyuk Yang <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Since flush operation synchronously waits for completion, flushing
system-wide WQs (e.g. system_wq) might introduce possibility of deadlock
due to unexpected locking dependency. Tejun Heo commented at [1] that it
makes no sense at all to call flush_workqueue() on the shared WQs as the
caller has no idea what it's gonna end up waiting for.
Although there is flush_scheduled_work() which flushes system_wq WQ with
"Think twice before calling this function! It's very easy to get into
trouble if you don't take great care." warning message, syzbot found a
circular locking dependency caused by flushing system_wq WQ [2].
Therefore, let's change the direction to that developers had better use
their local WQs if flush_scheduled_work()/flush_workqueue(system_*_wq) is
inevitable.
Steps for converting system-wide WQs into local WQs are explained at [3],
and a conversion to stop flushing system-wide WQs is in progress. Now we
want some mechanism for preventing developers who are not aware of this
conversion from again start flushing system-wide WQs.
Since I found that WARN_ON() is complete but awkward approach for teaching
developers about this problem, let's use __compiletime_warning() for
incomplete but handy approach. For completeness, we will also insert
WARN_ON() into __flush_workqueue() after all in-tree users stopped calling
flush_scheduled_work().
Link: https://lore.kernel.org/all/YgnQGZWT%[email protected]/ [1]
Link: https://syzkaller.appspot.com/bug?extid=bde0f89deacca7c765b8 [2]
Link: https://lkml.kernel.org/r/[email protected] [3]
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: pvdump and selftest improvements
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to show tests
|
|
|
|
asoc_simple_clean_reference() returns zero unconditionally. Letting it
return void instead makes it easier to see in the caller that there is no
error to handle.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Cezary Rojewski <[email protected]>
From there on is a range of boards appended. All of them follow the same:
This series focuses on populating boards/ subdirectory with supported
configurations by the avs-driver. Note: it is independent of recently
provided "Driver code and PCM operations" series [1], that is, code
found here should not collide with it.
Series starts with a small change that adds a helper to sound pcm
header, allowing for retrieving string naming a direction without the
need of substream pointer. Said helper is used by codec driver code that
follows it but I believe it's generic and helpful enough that it can be
called an independent addition to the sound core.
Code for generic HD-Audio codec driver follows. It is a ASoC wrapper for
existing HD-Audio codec code found in sound/pci/hda/. There is basically
no custom logic involved up to the point that driver follows
HDA_DEV_LEGACY convention, rather than the HDA_DEV_ASOC one. Commit
message for the given patch iterates on this and explains crucial parts
of the implementation.
From there on is a range of boards appended. All of them follow the same
scheme:
- define avs_create_dai_link() so DAI-LINKs can be created dynamically,
based on the link_mask (I2S) or the number of entries in the
->pcm_list_head list (HDA)
- define avs_create_dapm_routes() so DAPM routes can be created
dynamically, same rules as above apply
- define probe() function that creates new ASoC card, assign all
required operations and resources along with calling the two above
Changes in v2:
- 'link_mask' usage replaced with 'i2s_link_mask' as requested by
Pierre
- 'ssp_test' board renamed to 'i2s_test' to match naming convention used
for other i2s machine boards
- enriched commit message and Kconfig for the 'HD-Audio codec driver'
patch as requested by Kai
[1]: https://lore.kernel.org/all/[email protected]/
Amadeusz Sławiński (1):
ASoC: Intel: avs: Add max98373 machine board
Cezary Rojewski (13):
ALSA: Add snd_pcm_direction_name() helper
ASoC: codecs: Add HD-Audio codec driver
ASoC: Intel: avs: Add HDAudio machine board
ASoC: Intel: avs: Add DMIC machine board
ASoC: Intel: avs: Add I2S-test machine board
ASoC: Intel: avs: Add rt274 machine board
ASoC: Intel: avs: Add rt286 machine board
ASoC: Intel: avs: Add rt298 machine board
ASoC: Intel: avs: Add rt5682 machine board
ASoC: Intel: avs: Add nau8825 machine board
ASoC: Intel: avs: Add ssm4567 machine board
ASoC: Intel: avs: Add max98357a machine board
ASoC: Intel: avs: Add da7219 machine board
include/sound/pcm.h | 19 +-
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/hda-dai.c | 102 +++++++
sound/soc/codecs/hda.c | 395 +++++++++++++++++++++++++
sound/soc/codecs/hda.h | 19 ++
sound/soc/intel/Kconfig | 3 +
sound/soc/intel/avs/Makefile | 3 +
sound/soc/intel/avs/boards/Kconfig | 121 ++++++++
sound/soc/intel/avs/boards/Makefile | 27 ++
sound/soc/intel/avs/boards/da7219.c | 282 ++++++++++++++++++
sound/soc/intel/avs/boards/dmic.c | 93 ++++++
sound/soc/intel/avs/boards/hdaudio.c | 294 ++++++++++++++++++
sound/soc/intel/avs/boards/i2s_test.c | 180 +++++++++++
sound/soc/intel/avs/boards/max98357a.c | 154 ++++++++++
sound/soc/intel/avs/boards/max98373.c | 239 +++++++++++++++
sound/soc/intel/avs/boards/nau8825.c | 353 ++++++++++++++++++++++
sound/soc/intel/avs/boards/rt274.c | 310 +++++++++++++++++++
sound/soc/intel/avs/boards/rt286.c | 281 ++++++++++++++++++
sound/soc/intel/avs/boards/rt298.c | 281 ++++++++++++++++++
sound/soc/intel/avs/boards/rt5682.c | 340 +++++++++++++++++++++
sound/soc/intel/avs/boards/ssm4567.c | 271 +++++++++++++++++
22 files changed, 3775 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/codecs/hda-dai.c
create mode 100644 sound/soc/codecs/hda.c
create mode 100644 sound/soc/codecs/hda.h
create mode 100644 sound/soc/intel/avs/boards/Kconfig
create mode 100644 sound/soc/intel/avs/boards/Makefile
create mode 100644 sound/soc/intel/avs/boards/da7219.c
create mode 100644 sound/soc/intel/avs/boards/dmic.c
create mode 100644 sound/soc/intel/avs/boards/hdaudio.c
create mode 100644 sound/soc/intel/avs/boards/i2s_test.c
create mode 100644 sound/soc/intel/avs/boards/max98357a.c
create mode 100644 sound/soc/intel/avs/boards/max98373.c
create mode 100644 sound/soc/intel/avs/boards/nau8825.c
create mode 100644 sound/soc/intel/avs/boards/rt274.c
create mode 100644 sound/soc/intel/avs/boards/rt286.c
create mode 100644 sound/soc/intel/avs/boards/rt298.c
create mode 100644 sound/soc/intel/avs/boards/rt5682.c
create mode 100644 sound/soc/intel/avs/boards/ssm4567.c
--
2.25.1
|
|
Merge series from Pierre-Louis Bossart <[email protected]>:
Small updates to add initial tables for MeteorLake, SoundWire machine
driver support for tests without HDMI and RT1019 for consistency on
Chromebooks.
|
|
To make the code clear, reformat the comment in dropreason.h to k-doc
style.
Now, the comment can pass the check of kernel-doc without warnning:
$ ./scripts/kernel-doc -v -none include/linux/dropreason.h
include/linux/dropreason.h:7: info: Scanning doc for enum skb_drop_reason
Signed-off-by: Menglong Dong <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
It is annoying to add new skb drop reasons to 'enum skb_drop_reason'
and TRACE_SKB_DROP_REASON in trace/event/skb.h, and it's easy to forget
to add the new reasons we added to TRACE_SKB_DROP_REASON.
TRACE_SKB_DROP_REASON is used to convert drop reason of type number
to string. For now, the string we passed to user space is exactly the
same as the name in 'enum skb_drop_reason' with a 'SKB_DROP_REASON_'
prefix. Therefore, we can use 'auto-generation' to generate these
drop reasons to string at build time.
The new source 'dropreason_str.c' will be auto generated during build
time, which contains the string array
'const char * const drop_reasons[]'.
Signed-off-by: Menglong Dong <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
As the skb drop reasons are getting more and more, move the enum
'skb_drop_reason' and related function to the standalone header
'dropreason.h', as Jakub Kicinski suggested.
Signed-off-by: Menglong Dong <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The code comment says that the polynomial is x^16 + x^12 + x^15 + 1, but
the correct polynomial is x^16 + x^12 + x^5 + 1. Quoting from page 2 in
the ITU-T V.41 specification [1]:
2 Encoding and checking process
The service bits and information bits, taken in conjunction,
correspond to the coefficients of a message polynomial having terms
from x^(n-1) (n = total number of bits in a block or sequence) down to
x^16. This polynomial is divided, modulo 2, by the generating
polynomial x^16 + x^12 + x^5 + 1.
The hex (truncated) polynomial 0x1021 and CRC code implementation are
correct, however.
[1] https://www.itu.int/rec/T-REC-V.41-198811-I/en
Signed-off-by: Roger Knecht <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
Add support for MeteorLake (MTL) machines support, starting with mockup
devices.
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The file-wide OBJECT_FILES_NON_STANDARD annotation is used with
CONFIG_FRAME_POINTER to tell objtool to skip the entire file when frame
pointers are enabled. However that annotation is now deprecated because
it doesn't work with IBT, where objtool runs on vmlinux.o instead of
individual translation units.
Instead, use more fine-grained function-specific annotations:
- The 'save_mcount_regs' macro does funny things with the frame pointer.
Use STACK_FRAME_NON_STANDARD_FP to tell objtool to ignore the
functions using it.
- The return_to_handler() "function" isn't actually a callable function.
Instead of being called, it's returned to. The real return address
isn't on the stack, so unwinding is already doomed no matter which
unwinder is used. So just remove the STT_FUNC annotation, telling
objtool to ignore it. That also removes the implicit
ANNOTATE_NOENDBR, which now needs to be made explicit.
Fixes the following warning:
vmlinux.o: warning: objtool: __fentry__+0x16: return with modified stack frame
Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/b7a7a42fe306aca37826043dac89e113a1acdbac.1654268610.git.jpoimboe@kernel.org
|
|
This argument is not modified and thus can be set as const.
Signed-off-by: Clément Léger <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device
provides the .ndo_setup_tc interface or there is an indirect flow block
that has been registered. Otherwise, bail out early from the preparation
phase. Moreover, validate that family == NFPROTO_NETDEV and hook is
NF_NETDEV_INGRESS.
Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
By assigning xen-grant DMA ops we will restrict memory access for
passed device using Xen grant mappings. This is needed for using any
virtualized device (e.g. virtio) in Xen guests in a safe manner.
Please note, for the virtio devices the XEN_VIRTIO config should
be enabled (it forces ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS).
Signed-off-by: Oleksandr Tyshchenko <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Use the presence of "iommus" property pointed to the IOMMU node with
recently introduced "xen,grant-dma" compatible as a clear indicator
of enabling Xen grant mappings scheme for that device and read the ID
of Xen domain where the corresponding backend is running. The domid
(domain ID) is used as an argument to the Xen grant mapping APIs.
To avoid the deferred probe timeout which takes place after reusing
generic IOMMU device tree bindings (because the IOMMU device never
becomes available) enable recently introduced stub IOMMU driver by
selecting XEN_GRANT_DMA_IOMMU.
Also introduce xen_is_grant_dma_device() to check whether xen-grant
DMA ops need to be set for a passed device.
Remove the hardcoded domid 0 in xen_grant_setup_dma_ops().
Signed-off-by: Oleksandr Tyshchenko <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
In order to support virtio in Xen guests add a config option XEN_VIRTIO
enabling the user to specify whether in all Xen guests virtio should
be able to access memory via Xen grant mappings only on the host side.
Also set PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS feature from the guest
initialization code on Arm and x86 if CONFIG_XEN_VIRTIO is enabled.
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Oleksandr Tyshchenko <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Add support for the ATO25D1GA SPI NAND flash.
Datasheet:
- https://atta.szlcsc.com/upload/public/pdf/source/20191212/C469320_04599D67B03B078044EB65FF5AEDDDE9.pdf
Signed-off-by: Aidan MacDonald <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
This change gives a dramatic performance improvement in the hot path,
since many costly spin_lock_irqsave() calls can be avoided.
On an i.MX8MM system with a MCP2518FD CAN controller connected via SPI,
the time the driver takes to handle interrupts, or in other words the time
the IRQ line of the CAN controller stays low is mainly dominated by the
time it takes to do 3 relatively short sync SPI transfers. The effect of
this patch is a reduction of this time from 136us down to only 98us.
Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: David Jander <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Since the CS35L41 HDA driver also support hibernation, it
makes sense to move code from the ASoC driver to enter
hibernation into common code.
Since HDA must support laptops which do not support hibernation
due to lack of external boost GPIO it is necessary to
ensure the function returns an error when an unsupported
boost type is in use.
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Stefan Binding <[email protected]>
Signed-off-by: Vitaly Rodionov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
CS35L41 HDA Driver will support hibernation using DSP firmware,
move the exit hibernate function into shared code so this can
be reused.
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Stefan Binding <[email protected]>
Signed-off-by: Vitaly Rodionov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The helper function snd_soc_component_is_codec is based off the
presence of the non_legacy_dai_naming flag. This isn't super robust
as CPU side components may also specify this flag, and indeed the
kernel already contains a couple that do. After componentisation there
isn't really a totally robust solution to identifying what is a CODEC
driver, without introducing a flag specifically for that purpose, and
really the desirable direction to move in is that the distinction
doesn't matter.
This patch does two things to try to mitigate these problems. Firstly,
now that all the other users of the helper function have been removed,
it makes the helper function local to the driver rather, than being
part of the core. This should help to discourage any new code from
being created that depends on the CODEC driver distinction. Secondly,
it updates the helper function itself to use the endianness flag
rather than the non_legacy_dai_naming flag. The endianness flag is
definitely invalid on a CPU side component, so it a more reliable
indicator that the device is definitely a CODEC. The vast majority of
buses require the CODEC to set the endianness flag, so the number of
corner cases should be fairly minimal. It is worth noting that CODECs
sending audio over SPI, or built into the CPU CODECs are potential
corner cases, however the hope is that in most cases those types of
devices do not consitute a simple audio card.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Now the behaviour of the core and all drivers is updated to the new
direct clock specification the temporary set_fmt_new callback can be
completely removed.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The original set_fmt callback always passes clock provider/consumer
with respect to the CODEC. This made sense when the framework was
directly broken down into platforms and CODECs. Now everything is
componentised it simplifies things if each side of the link is
just told if it is provider or consumer of the clocks. To start
this migration add a new callback that can be used to receive a
direct specification of clocking. As there are more CODEC drivers
than platform drivers, we make the new flags identical to the old
CODEC flags meaning CODEC drivers will not require an update.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Allow for retrieving string naming a direction of a stream without the
need of substream pointer.
Signed-off-by: Cezary Rojewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Adds samsung,boot-mode.h header file which contains boot mode
definitions for bootloader. As for now, there are only boot mode
definitions for Exynos Auto v9 SoC.
Signed-off-by: Chanho Park <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Introduce Xen grant DMA-mapping layer which contains special DMA-mapping
routines for providing grant references as DMA addresses to be used by
frontends (e.g. virtio) in Xen guests.
Add the needed functionality by providing a special set of DMA ops
handling the needed grant operations for the I/O pages.
The subsequent commit will introduce the use case for xen-grant DMA ops
layer to enable using virtio devices in Xen guests in a safe manner.
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Oleksandr Tyshchenko <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
For support of virtio via grant mappings in rare cases larger mappings
using consecutive grants are needed. Support those by adding a bitmap
of free grants.
As consecutive grants will be needed only in very rare cases (e.g. when
configuring a virtio device with a multi-page ring), optimize for the
normal case of non-consecutive allocations.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
This patch introduces new helper and places it in new header.
The helper's purpose is to assign any Xen specific DMA ops in
a single place. For now, we deal with xen-swiotlb DMA ops only.
The one of the subsequent commits in current series will add
xen-grant DMA ops case.
Also re-use the xen_swiotlb_detect() check on Arm32.
Signed-off-by: Oleksandr Tyshchenko <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
[For arm64]
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using arch_has_restricted_virtio_memory_access() together
with CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS, replace those
with platform_has() and a new platform feature
PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Tested-by: Oleksandr Tyshchenko <[email protected]> # Arm64 only
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
|
|
Add a simple infrastructure for setting, resetting and querying
platform feature flags.
Flags can be either global or architecture specific.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Tested-by: Oleksandr Tyshchenko <[email protected]> # Arm64 only
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Delete the redundant word 'using'.
Signed-off-by: Xiang wangx <[email protected]>
Reviewed-by: Tzung-Bi Shih <[email protected]>
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Unused now.
Fixes: 4f1a22ee7b57 ("libata: Improve ATA queued command allocation")
Cc: John Garry <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull delay-accounting update from Andrew Morton:
"A single featurette for delay accounting.
Delayed a bit because, unusually, it had dependencies on both the
mm-stable and mm-nonmm-stable queues"
* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
delayacct: track delays from write-protect copy
|
|
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953fd221 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Fixes: fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/[email protected]/
Reported-by: Stephen Rothwell <[email protected]>
Reported-by: Sudip Mukherjee <[email protected]>
Reviewed-by: Yury Norov <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
|
|
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file descriptor updates from Al Viro.
- Descriptor handling cleanups
* tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Unify the primitives for file descriptor closing
fs: remove fget_many and fput_many interface
io_uring_enter(): don't leave f.flags uninitialized
|
|
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace_stop cleanups from Eric Biederman:
"While looking at the ptrace problems with PREEMPT_RT and the problems
Peter Zijlstra was encountering with ptrace in his freezer rewrite I
identified some cleanups to ptrace_stop that make sense on their own
and move make resolving the other problems much simpler.
The biggest issue is the habit of the ptrace code to change
task->__state from the tracer to suppress TASK_WAKEKILL from waking up
the tracee. No other code in the kernel does that and it is straight
forward to update signal_wake_up and friends to make that unnecessary.
Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
on the fact that all stopped states except the special stop states can
tolerate spurious wake up and recover their state.
The state of stopped and traced tasked is changed to be stored in
task->jobctl as well as in task->__state. This makes it possible for
the freezer to recover tasks in these special states, as well as
serving as a general cleanup. With a little more work in that
direction I believe TASK_STOPPED can learn to tolerate spurious wake
ups and become an ordinary stop state.
The TASK_TRACED state has to remain a special state as the registers
for a process are only reliably available when the process is stopped
in the scheduler. Fundamentally ptrace needs acess to the saved
register values of a task.
There are bunch of semi-random ptrace related cleanups that were found
while looking at these issues.
One cleanup that deserves to be called out is from commit 57b6de08b5f6
("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
makes a change that is technically user space visible, in the handling
of what happens to a tracee when a tracer dies unexpectedly. According
to our testing and our understanding of userspace nothing cares that
spurious SIGTRAPs can be generated in that case"
* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
ptrace: Always take siglock in ptrace_resume
ptrace: Don't change __state
ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
ptrace: Document that wait_task_inactive can't fail
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
signal: Use lockdep_assert_held instead of assert_spin_locked
ptrace: Remove arch_ptrace_attach
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
signal: Replace __group_send_sig_info with send_signal_locked
signal: Rename send_signal send_signal_locked
|