| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Not only is this function unused, but even worse, the bit it is checking
is actually used for signaling if the feature is supported, not enabled.
Therefore, remove the unused helper function ata_id_lba48_enabled().
ata_id_has_lba48() is left unmodified, since this extra supported bit
(Bit 10 of word 86) is simply a copy of the bit that ata_id_has_lba48()
already checks (Bit 10 of word 83), see ACS-5 r10:
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives on a per-CPU basis.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Petr Mladek <[email protected]>
|
|
On strict load-store architectures, the use of this_cpu_inc() by
srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU.
To see this suppose that an NMI arrives in the middle of srcu_read_lock(),
just after it has read ->srcu_lock_count, but before it has written
the incremented value back to memory. If that NMI handler also does
srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure,
then upon return from that NMI handler, the interrupted srcu_read_lock()
will overwrite the NMI handler's update to ->srcu_lock_count, but
leave unchanged the NMI handler's update by srcu_read_unlock() to
->srcu_unlock_count.
This can result in a too-short SRCU grace period, which can in turn
result in arbitrary memory corruption.
If the NMI handler instead interrupts the srcu_read_unlock(), this
can result in eternal SRCU grace periods, which is not much better.
This commit therefore creates a pair of new srcu_read_lock_nmisafe()
and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in
both NMI handlers and in process and IRQ context. It is bad practice
to mix the existing and the new _nmisafe() primitives on the same
srcu_struct structure. Use one set or the other, not both.
Just to underline that "bad practice" point, using srcu_read_lock() at
process level and srcu_read_lock_nmisafe() in your NMI handler will not,
repeat NOT, work. If you do not immediately understand why this is the
case, please review the earlier paragraphs in this commit log.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Randy Dunlap. ]
[ paulmck: Apply feedback from John Ogness. ]
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Paul E. McKenney <[email protected]>
Acked-by: Randy Dunlap <[email protected]> # build-tested
Reviewed-by: Frederic Weisbecker <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Petr Mladek <[email protected]>
|
|
Different function signatures means they needs to be different
functions; otherwise CFI gets upset.
As triggered by the ftrace boot tests:
[] CFI failure at ftrace_return_to_handler+0xac/0x16c (target: ftrace_stub+0x0/0x14; expected type: 0x0a5d5347)
Fixes: 3c516f89e17e ("x86: Add support for CONFIG_CFI_CLANG")
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Tested-by: Mark Rutland <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The SPIB and DRMS capabilities are orthogonal to the DSP enablement
and can be used whether the stream is coupled or not.
The existing code partitioning makes limited sense, the capabilities
are parsed at the sound/hda level but helpers are located in
sound/hda/ext.
This patch moves all the SPIB/DRMS functionality to the sound/hda
layer. This reduces the complexity of the sound/hda/ext layer which is
now limited to handling the multi-link extensions and stream
coupling/decoupling helpers.
Note that this is an iso-functionality code move and rename, the
HDaudio legacy driver would need additional changes to make use of
these capabilities.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
All the helpers dealing with multi-link configurations are located in
the hdac_ext_controller.c, except the two set/clear routines that
modify the LOSIDV registers.
For consistency, move the two helpers and add the 'bus' prefix. One
could argue that the 'ml' prefix might be more relevant but that would
be a larger code change.
No functionality change, just move and rename.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
We should only use 'link' in the context of multi-link
configurations. Streams are configured from a different register space
and are not dependent on link except for LOSIDV settings.
Not functionality change, just pure rename.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
No functionality change, just prefix addition to clearly identify that
the helper only applies to the 'ext' part for Intel platforms.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
We have two helpers with confusing names and different purposes.
Rename bus_get_link() and bus_get_link_at() as bus_get_hlink_by_name()
and bus_get_hlink_by_addr() respectively.
No functionality change
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Follow the convention and use hlink for consistency.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Cezary Rojewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
In order to make it a proper module and disentangle it from facilities,
add a notifier for reporting memory errors. Use an atomic notifier
because calls sites like ghes_proc_in_irq() run in interrupt context.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <[email protected]>
Signed-off-by: Jia He <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
With the changes to the driver core to make more pointers const, the USB
subsystem also needs to be modified to take a const * for the devnode
callback so that the driver core's constant pointer will also be
properly propagated.
Cc: Benjamin Tissoires <[email protected]>
Cc: Juergen Stuber <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Acked-by: Pete Zaitcev <[email protected]>
Reviewed-by: Jiri Kosina <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The functions to_usb_interface(), to_usb_device, and
interface_to_usbdev() sometimes would like to take a const * and return
a const * back. As we are doing pointer math, a call to container_of()
loses the const-ness of a pointer, so use a _Generic() macro to pick the
proper inline function to call instead.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If a const * to a kobject is passed to kobj_to_dev(), we want to return
back a const * to a device as the driver core shouldn't be modifying a
constant structure. But when dealing with container_of() the pointer
const attribute is cast away, so we need to manually handle this by
determining the type of the pointer passed in to know the type of the
pointer to pass out.
Luckily _Generic can do this type of magic, and as the kernel now
supports C11 it is availble to us to handle this type of build-time type
detection.
Cc: "Rafael J. Wysocki" <[email protected]>
Reviewed-by: Sakari Ailus <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
__le32 and __le64 types aren't portable and are not available on
FreeBSD (which uses the same uAPI).
Instead of attempting to always output little endian, just use native
endianness in the dumps. Tools can detect the endianness in use by
looking at the 'magic' field, but equally we don't expect big-endian to
be used with Mali (there are no known implementations out there).
Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7252
Fixes: 730c2bf4ad39 ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The two structs internal to struct panfrost_dump_object_header were
named, but sadly that is incompatible with C++, causing an error: "an
anonymous union may only have public non-static data members".
However nothing refers to struct pan_reg_hdr and struct pan_bomap_hdr
and there's no need to export these definitions, so lets drop them. This
fixes the C++ build error with the minimum change in userspace API.
Reported-by: Adrián Larumbe <[email protected]>
Fixes: 730c2bf4ad39 ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now that the posix acl api is active we can remove all the hacky helpers
we had to keep around for all these years and also remove the set and
get posix acl xattr handler methods as they aren't needed anymore.
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
In previous patches we built a new posix api solely around get and set
inode operations. Now that we have all the pieces in place we can switch
the system calls and the vfs over to only rely on this api when
interacting with posix acls. This finally removes all type unsafety and
type conversion issues explained in detail in [1] that we aim to get rid
of.
With the new posix acl api we immediately translate into an appropriate
kernel internal struct posix_acl format both when getting and setting
posix acls. This is a stark contrast to before were we hacked unsafe raw
values into the uapi struct that was stored in a void pointer relying
and having filesystems and security modules hack around in the uapi
struct as well.
Link: https://lore.kernel.org/all/[email protected] [1]
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
Now that posix acls have a proper api us it to copy them.
All filesystems that can serve as lower or upper layers for overlayfs
have gained support for the new posix acl api in previous patches.
So switch all internal overlayfs codepaths for copying posix acls to the
new posix acl api.
Acked-by: Miklos Szeredi <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
In previous patches we implemented get and set inode operations for all
non-stacking filesystems that support posix acls but didn't yet
implement get and/or set acl inode operations. This specifically
affected cifs and 9p.
Now we can build a posix acl api based solely on get and set inode
operations. We add a new vfs_remove_acl() api that can be used to set
posix acls. This finally removes all type unsafety and type conversion
issues explained in detail in [1] that we aim to get rid of.
After we finished building the vfs api we can switch stacking
filesystems to rely on the new posix api and then finally switch the
xattr system calls themselves to rely on the posix acl api.
Link: https://lore.kernel.org/all/[email protected] [1]
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
In previous patches we implemented get and set inode operations for all
non-stacking filesystems that support posix acls but didn't yet
implement get and/or set acl inode operations. This specifically
affected cifs and 9p.
Now we can build a posix acl api based solely on get and set inode
operations. We add a new vfs_get_acl() api that can be used to get posix
acls. This finally removes all type unsafety and type conversion issues
explained in detail in [1] that we aim to get rid of.
After we finished building the vfs api we can switch stacking
filesystems to rely on the new posix api and then finally switch the
xattr system calls themselves to rely on the posix acl api.
Link: https://lore.kernel.org/all/[email protected] [1]
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
In previous patches we implemented get and set inode operations for all
non-stacking filesystems that support posix acls but didn't yet
implement get and/or set acl inode operations. This specifically
affected cifs and 9p.
Now we can build a posix acl api based solely on get and set inode
operations. We add a new vfs_set_acl() api that can be used to set posix
acls. This finally removes all type unsafety and type conversion issues
explained in detail in [1] that we aim to get rid of.
After we finished building the vfs api we can switch stacking
filesystems to rely on the new posix api and then finally switch the
xattr system calls themselves to rely on the posix acl api.
Link: https://lore.kernel.org/all/[email protected] [1]
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
The security_inode_post_setxattr() hook is used by security modules to
update their own security.* xattrs. Consequently none of the security
modules operate on posix acls. So we don't need an additional security
hook when post setting posix acls.
However, the integrity subsystem wants to be informed about posix acl
changes in order to reset the EVM status flag.
-> evm_inode_post_setxattr()
-> evm_update_evmxattr()
-> evm_calc_hmac()
-> evm_calc_hmac_or_hash()
and evm_cacl_hmac_or_hash() walks the global list of protected xattr
names evm_config_xattrnames. This global list can be modified via
/sys/security/integrity/evm/evm_xattrs. The write to "evm_xattrs" is
restricted to security.* xattrs and the default xattrs in
evm_config_xattrnames only contains security.* xattrs as well.
So the actual value for posix acls is currently completely irrelevant
for evm during evm_inode_post_setxattr() and frankly it should stay that
way in the future to not cause the vfs any more headaches. But if the
actual posix acl values matter then evm shouldn't operate on the binary
void blob and try to hack around in the uapi struct anyway. Instead it
should then in the future add a dedicated hook which takes a struct
posix_acl argument passing the posix acls in the proper vfs format.
For now it is sufficient to make evm_inode_post_set_acl() a wrapper
around evm_inode_post_setxattr() not passing any actual values down.
This will cause the hashes to be updated as before.
Reviewed-by: Paul Moore <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
So far posix acls were passed as a void blob to the security and
integrity modules. Some of them like evm then proceed to interpret the
void pointer and convert it into the kernel internal struct posix acl
representation to perform their integrity checking magic. This is
obviously pretty problematic as that requires knowledge that only the
vfs is guaranteed to have and has lead to various bugs. Add a proper
security hook for setting posix acls and pass down the posix acls in
their appropriate vfs format instead of hacking it through a void
pointer stored in the uapi format.
I spent considerate time in the security module and integrity
infrastructure and audited all codepaths. EVM is the only part that
really has restrictions based on the actual posix acl values passed
through it (e.g., i_mode). Before this dedicated hook EVM used to translate
from the uapi posix acl format sent to it in the form of a void pointer
into the vfs format. This is not a good thing. Instead of hacking around in
the uapi struct give EVM the posix acls in the appropriate vfs format and
perform sane permissions checks that mirror what it used to to in the
generic xattr hook.
IMA doesn't have any restrictions on posix acls. When posix acls are
changed it just wants to update its appraisal status to trigger an EVM
revalidation.
The removal of posix acls is equivalent to passing NULL to the posix set
acl hooks. This is the same as before through the generic xattr api.
Link: https://lore.kernel.org/all/[email protected] [1]
Acked-by: Paul Moore <[email protected]> (LSM)
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
So far posix acls were passed as a void blob to the security and
integrity modules. Some of them like evm then proceed to interpret the
void pointer and convert it into the kernel internal struct posix acl
representation to perform their integrity checking magic. This is
obviously pretty problematic as that requires knowledge that only the
vfs is guaranteed to have and has lead to various bugs. Add a proper
security hook for setting posix acls and pass down the posix acls in
their appropriate vfs format instead of hacking it through a void
pointer stored in the uapi format.
In the next patches we implement the hooks for the few security modules
that do actually have restrictions on posix acls.
Link: https://lore.kernel.org/all/[email protected] [1]
Acked-by: Paul Moore <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
In order to build a type safe posix api around get and set acl we need
all filesystem to implement get and set acl.
So far 9p implemented a ->get_inode_acl() operation that didn't require
access to the dentry in order to allow (limited) permission checking via
posix acls in the vfs. Now that we have get and set acl inode operations
that take a dentry argument we can give 9p get and set acl inode
operations.
This is mostly a refactoring of the codepaths currently used in 9p posix
acl xattr handler. After we have fully implemented the posix acl api and
switched the vfs over to it, the 9p specific posix acl xattr handler and
associated code will be removed.
Note, until the vfs has been switched to the new posix acl api this
patch is a non-functional change.
Link: https://lore.kernel.org/all/[email protected] [1]
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on the old get
acl inode operation to retrieve posix acl and need to implement their
own custom handlers because of that.
In a previous patch we renamed the old get acl inode operation to
->get_inode_acl(). We decided to rename it and implement a new one since
->get_inode_acl() is called generic_permission() and inode_permission()
both of which can be called during an filesystem's ->permission()
handler. So simply passing a dentry argument to ->get_acl() would have
amounted to also having to pass a dentry argument to ->permission(). We
avoided that change.
This adds a new ->get_acl() inode operations which takes a dentry
argument which filesystems such as 9p, cifs, and overlayfs can implement
to get posix acls.
Link: https://lore.kernel.org/all/[email protected] [1]
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
The current inode operation for getting posix acls takes an inode
argument but various filesystems (e.g., 9p, cifs, overlayfs) need access
to the dentry. In contrast to the ->set_acl() inode operation we cannot
simply extend ->get_acl() to take a dentry argument. The ->get_acl()
inode operation is called from:
acl_permission_check()
-> check_acl()
-> get_acl()
which is part of generic_permission() which in turn is part of
inode_permission(). Both generic_permission() and inode_permission() are
called in the ->permission() handler of various filesystems (e.g.,
overlayfs). So simply passing a dentry argument to ->get_acl() would
amount to also having to pass a dentry argument to ->permission(). We
should avoid this unnecessary change.
So instead of extending the existing inode operation rename it from
->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that
passes a dentry argument and which filesystems that need access to the
dentry can implement instead of ->get_inode_acl(). Filesystems like cifs
which allow setting and getting posix acls but not using them for
permission checking during lookup can simply not implement
->get_inode_acl().
This is intended to be a non-functional change.
Link: https://lore.kernel.org/all/[email protected] [1]
Suggested-by/Inspired-by: Christoph Hellwig <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
Backmerging to get v6.1-rc1.
Signed-off-by: Thomas Zimmermann <[email protected]>
|
|
Commit d7e7b9af104c ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key") moved the keyring destruction from __put_super() to
generic_shutdown_super() so that the filesystem's block device(s) are
still available. Unfortunately, this causes a memory leak in the case
where a mount is attempted with the test_dummy_encryption mount option,
but the mount fails after the option has already been processed.
To fix this, attempt the keyring destruction in both places.
Reported-by: [email protected]
Fixes: d7e7b9af104c ("fscrypt: stop using keyrings subsystem for fscrypt_master_key")
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Christian Brauner (Microsoft) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The fb_base in struct drm_mode_config has been unused for a long time.
Some drivers set it and some don't leading to a very confusing state
where the variable can't be relied upon, because there's no indication
as to which driver sets it and which doesn't.
The only usage of fb_base is internal to two drivers so instead of trying
to force it into all the drivers to get it into a coherent state
completely remove it.
Signed-off-by: Zack Rusin <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Acked-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Address a bunch of kdoc warnings:
include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family'
include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead
include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast'
include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead
include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info'
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Include an 80-byte buffer in struct netlink_ext_ack that can be used
for scnprintf()ed messages. This does mean that the resulting string
can't be enumerated, translated etc. in the way NL_SET_ERR_MSG() was
designed to allow.
Signed-off-by: Edward Cree <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Merge series from Siarhei Volkau <[email protected]>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
|
|
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Add support for QSPI ioctl functions and enums.
Signed-off-by: Rajan Vaja <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Signed-off-by: Amit Kumar Mahapatra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Addressing
When the idxd_user_drv driver is bound to a Work Queue (WQ) device
without IOMMU or with IOMMU Passthrough without Shared Virtual
Addressing (SVA), the application gains direct access to physical
memory via the device by programming physical address to a submitted
descriptor. This allows direct userspace read and write access to
arbitrary physical memory. This is inconsistent with the security
goals of a good kernel API.
Unlike vfio_pci driver, the IDXD char device driver does not provide any
ways to pin user pages and translate the address from user VA to IOVA or
PA without IOMMU SVA. Therefore the application has no way to instruct the
device to perform DMA function. This makes the char device not usable for
normal application usage.
Since user type WQ without SVA cannot be used for normal application usage
and presents the security issue, bind idxd_user_drv driver and enable user
type WQ only when SVA is enabled (i.e. user PASID is enabled).
Fixes: 448c3de8ac83 ("dmaengine: idxd: create user driver for wq 'device'")
Cc: [email protected]
Suggested-by: Arjan Van De Ven <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The "convert-xxx" properties only have an effect for DPCM DAI links.
A DAI link is only created as DPCM if the device tree requires it;
part of this involves checking for the use of "convert-xxx" properties.
When the convert-sample-format property was added, the checks got out
of sync. A DAI link that specified only convert-sample-format but did
not pass any of the other DPCM checks would not go into DPCM mode and
the convert-sample-format property would be silently ignored.
Fix this by adding a function to do the "convert-xxx" property checks,
instead of open-coding it in simple-card and audio-graph-card. And add
"convert-sample-format" to the check function so that DAI links using
it will be initialized correctly.
Fixes: 047a05366f4b ("ASoC: simple-card-utils: Fixup DAI sample format")
Acked-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Aidan MacDonald <[email protected]>
Acked-by: Sameer Pujar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Provide a helper that restricts the link modes according to the
phylink capabilities.
Signed-off-by: Russell King (Oracle) <[email protected]>
[rebased on net-next/master and added documentation]
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Current soc-pcm.c is coping fe hw_param to dpcm->hw_param (A),
fixup it (B), and copy it to be (C).
int dpcm_be_dai_hw_params(...)
{
...
for_each_dpcm_be(fe, stream, dpcm) {
...
/* copy params for each dpcm */
(A) memcpy(&dpcm->hw_params, &fe->dpcm[stream].hw_params, ...) ;
/* perform any hw_params fixups */
(B) ret = snd_soc_link_be_hw_params_fixup(be, &dpcm->hw_params);
...
/* copy the fixed-up hw params for BE dai */
(C) memcpy(&be->dpcm[stream].hw_params, &dpcm->hw_params, ...);
...
}
...
}
But here, (1) it is coping hw_params without caring stream (Playback/Capture),
(2) we can get same value from be. We don't need to have dpcm->hw_params.
This patch removes it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The comment of snd_soc_dapm_widget_for_each_path() (= X) has
"_sink_" (= s), but this is typo.
With "_sink_" is already exist at (A). This patch fixup it.
/**
(s) * snd_soc_dapm_widget_for_each_sink_path - ...
* ****
*/
(X) #define snd_soc_dapm_widget_for_each_path(w, dir, p)
/**
(s) * snd_soc_dapm_widget_for_each_sink_path_safe - ...
* ****
*/
(X) #define snd_soc_dapm_widget_for_each_path_safe(w, dir, p, next_p)
(A) #define snd_soc_dapm_widget_for_each_sink_path(w, p)
****
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
soc-dapm.h defines many things, but it is using
randam white space and tag.
This patch do nothing, but cleanup its white space.
This patch cleanup also 100 char in 1 line.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Current ASoC has snd_soc_dapm_wcache, but its member is only
snd_soc_dapm_widget.
struct snd_soc_dapm_wcache {
struct snd_soc_dapm_widget *widget;
};
It is no meaning for now, and makes code unreadable.
This patch replace snd_soc_dapm_wcache to snd_soc_dapm_widget directly.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.
Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().
As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.
Link: https://lore.kernel.org/all/[email protected] [1]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
Setting this flag on a scheduler fence prevents pipelining of jobs
depending on this fence. In other words we always insert a full CPU
round trip before dependent jobs are pushed to the pipeline.
Signed-off-by: Christian König <[email protected]>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2113#note_1579296
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Luben Tuikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There are significant differences between signal handling on 32-bit vs.
64-bit, like different structure layouts and legacy syscalls. Instead
of duplicating that code for native and compat, merge both versions
into one file.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: "Eric W. Biederman" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Borislav Petkov <[email protected]>
|
|
x86 no longer uses compat_sigset_t when CONFIG_COMPAT isn't enabled, so
remove the override define.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: "Eric W. Biederman" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Borislav Petkov <[email protected]>
|
|
Fix spelling typo in comment.
Reported-by: k2ci <[email protected]>
Signed-off-by: Jiangshan Yi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
ib_reg_mr(3) which is used to register a MR with specific access flags
for specific HCA will set errno when something go wrong.
So, here we should return the specific -EOPNOTSUPP when the being
requested ODP access flag is unsupported by the HCA(such as RXE).
Signed-off-by: Li Zhijian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Zhu Yanjun <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Introduce the LANDLOCK_ACCESS_FS_TRUNCATE flag for file truncation.
This flag hooks into the path_truncate, file_truncate and
file_alloc_security LSM hooks and covers file truncation using
truncate(2), ftruncate(2), open(2) with O_TRUNC, as well as creat().
This change also increments the Landlock ABI version, updates
corresponding selftests, and updates code documentation to document
the flag.
In security/security.c, allocate security blobs at pointer-aligned
offsets. This fixes the problem where one LSM's security blob can
shift another LSM's security blob to an unaligned address (reported
by Nathan Chancellor).
The following operations are restricted:
open(2): requires the LANDLOCK_ACCESS_FS_TRUNCATE right if a file gets
implicitly truncated as part of the open() (e.g. using O_TRUNC).
Notable special cases:
* open(..., O_RDONLY|O_TRUNC) can truncate files as well in Linux
* open() with O_TRUNC does *not* need the TRUNCATE right when it
creates a new file.
truncate(2) (on a path): requires the LANDLOCK_ACCESS_FS_TRUNCATE
right.
ftruncate(2) (on a file): requires that the file had the TRUNCATE
right when it was previously opened. File descriptors acquired by
other means than open(2) (e.g. memfd_create(2)) continue to support
truncation with ftruncate(2).
Cc: Nathan Chancellor <[email protected]>
Signed-off-by: Günther Noack <[email protected]>
Acked-by: Paul Moore <[email protected]> (LSM)
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mickaël Salaün <[email protected]>
|