| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the missing IDs for scuba and its QRB variant.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.
Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.
Fixes: 394ffa503bc4 ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
We have more commands to show in the trace. Sync up.
Signed-off-by: Minwoo Im <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
If we add one more callback, we can have common bank switch sequences
between old and new hardware: the only difference is where the CMDSYNC
register is located.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The bus start/stop sequences can be reused between platforms if we add
a couple of new callbacks. In following patches the code will be moved to
a shared file.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The user might want to stall/resume engines to perform power testing
for various scenarios. Because our current
HL_CS_FLAGS_ENGINE_CORE_COMMAND command only handles the engines' cores,
we need to add another opcode for handling entire engine and not just
its core.
The user supplies an array, where each entry holds the engine's ID and
the command to send to the engine. The size of the array is limited
by the number of engines in the ASIC (only Gaudi2 is currently
supported).
Signed-off-by: Koby Elbaz <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
In order to allow TPC engines to raise an assert, we must expose
the relevant MSIX interrupt to the user so he will configure the engine
correctly. In addition, we implement the corresponding interrupt
handler that will notify the user upon such an event.
Signed-off-by: Ofir Bitton <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
|
|
In order for engine cores to raise interrupts towards FW, They need
to know which register the event data should be written to.
Hence, we forward the relevant scratchpad register received during
dynamic regs handshake with FW.
Signed-off-by: Ofir Bitton <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
|
|
Enhance the existing user notifications by adding a HW and FW critical
event bits to be used when a HW or FW event occur that requires
both SW abort and hard-resetting the chip.
Signed-off-by: Moti Haimovski <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
|
|
The returned array size for input formats is set through
atomic_get_input_bus_fmts()'s 'num_input_fmts' argument, so use
'num_input_fmts' to represent the array size in the function's kdoc,
not 'num_output_fmts'.
Fixes: 91ea83306bfa ("drm/bridge: Fix the bridge kernel doc")
Fixes: f32df58acc68 ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Liu Ying <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer
wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS.
For some reason we have no corresponding check for SO_PASSSEC.
In the recvmsg(2) doc we have:
MSG_CTRUNC
indicates that some control data was discarded due to lack
of space in the buffer for ancillary data.
So, we need to set MSG_CTRUNC flag for all types of SCM.
This change can break applications those don't check MSG_CTRUNC flag.
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alexander Mikhalitsyn <[email protected]>
v2:
- commit message was rewritten according to Eric's suggestion
Acked-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Previously, v2 support was derived from a very specific format of the SEID
as part of the SMC-D codebase. Make this part of the SMC-D device API, so
implementers do not need to adhere to a specific SEID format.
Signed-off-by: Stefan Raspl <[email protected]>
Reviewed-and-tested-by: Jan Karcher <[email protected]>
Reviewed-by: Wenjia Zhang <[email protected]>
Signed-off-by: Wenjia Zhang <[email protected]>
Reviewed-by: Tony Lu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We have many lockless accesses to n->nud_state.
Before adding another one in the following patch,
add annotations to readers and writers.
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
IP tunnels can apparently update dev->needed_headroom
in their xmit path.
This patch takes care of three tunnels xmit, and also the
core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA()
helpers.
More changes might be needed for completeness.
BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit
read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1:
ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
write to 0xffff88815b9da0ec of 2 bytes by task 2379 on cpu 0:
ip_tunnel_xmit+0x1294/0x1730 net/ipv4/ip_tunnel.c:804
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip6_finish_output2+0x9bc/0xc50 net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x39a/0x4e0 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:444 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
mld_sendpack+0x438/0x6a0 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x519/0x7b0 net/ipv6/mcast.c:2653
process_one_work+0x3e6/0x750 kernel/workqueue.c:2390
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2537
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x0dd4 -> 0x0e14
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5fa354-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Workqueue: mld mld_ifc_work
Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
- MEI patches to fix suspend/resume issues with the i915's PXP. (Alexander)
Driver Changes:
- Registers helpers and clean-ups. (Lucas)
- PXP fixes and clean-ups. (Alan, Alexander)
- CDCLK related fixes and w/a (Chaitanya, Stanislav)
- Move display code to use RMW whenever possible (Andrzej)
- PSR fixes (Jouni, Ville)
- Implement async_flip mode per plane tracking (Andrzej)
- Remove pre-production Workarounds (Matt)
- HDMI related fixes (Ankit)
- LVDS cleanup (Ville)
- Watermark fixes and cleanups (Ville, Jani, Stanilav)
- DMC code related fixes, cleanups and improvements (Jani)
- Implement fb_dirty for PSR,FBC,DRRS fixes (Jouni)
- Initial DSB improvements targeting LUTs loading (Ville)
- HWMON related fixes (Ashutosh)
- PCI ID updates (Jonathan, Matt Roper)
- Fix leak in scatterlist (Matt Atwood)
- Fix eDP+DSI dual panel systems (Ville)
- Cast iomem to avoid sparese warnings (Jani)
- Set default backlight controller index (Jani)
- More MTL enabling (RK)
- Conversion of display dev_priv towards i915 (Nirmoy)
- Improvements in log/debug messages (Ville)
- Increase slice_height for DP VDSC (Suraj)
- VBT ports improvements (Ville)
- Fix platforms without Display (Imre)
- Other generic display code clean-ups (Ville, Jani, Rodrigo)
- Add RPL-U sub platform (Chaitanya)
- Add inverted backlight quirk for HP 14-r206nv (Mavroudis)
- Transcoder timing improvements (Ville)
- Track audio state per-transcoder (Ville)
- Error/underrun interrupt fixes (Ville)
- Update combo PHY init sequence (Matt Roper)
- Get HDR DPCD refresh timeout (Ville)
- Vblank improvements (Ville)
- DSS fixes and cleanups (Jani)
- PM code cleanup (Jani)
- Split display parts related to RPS (Jani)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow histogram values to have modifies. They can cause a NULL
pointer dereference if they do.
- Warn if hist_field_name() is passed a NULL. Prevent the NULL pointer
dereference mentioned above.
- Fix invalid address look up race in lookup_rec()
- Define ftrace_stub_graph conditionally to prevent linker errors
- Always check if RCU is watching at all tracepoint locations
* tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make tracepoint lockdep check actually test something
ftrace,kcfi: Define ftrace_stub_graph conditionally
ftrace: Fix invalid address access in lookup_rec() when index is 0
tracing: Check field value in hist_field_name()
tracing: Do not let histogram values have some modifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of clk driver fixes, and a couple OF clk patches to fix
regressions seen in the last few weeks. The fwnode patch broke the
build for one driver that isn't always compiled, so I waited over the
weekend to be certain no more build issues came up.
- Mark the firmware node (fwnode) that matches the compatible in
CLK_OF_DECLARE() as initialized to fix a regression on u8500 SoCs
after fw_devlink stopped checking parent nodes in
of_link_to_phandle()
- Remove a couple MODULE_LICENSE macros in non-modules
- Update the maintainers file for Microchip clk drivers
- Use 'select' instead of 'depend on' for the REGMAP config to fix
Kconfig issues
- Use div_u64() for portable 64-bit division in K210 clk driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Avoid invalid function names in CLK_OF_DECLARE()
clk: k210: remove an implicit 64-bit division
MAINTAINERS: add missing clock driver coverage for Microchip FPGAs
clk: HI655X: select REGMAP instead of depending on it
kbuild, clk: remove MODULE_LICENSE in non-modules
kbuild, clk: bcm2835: remove MODULE_LICENSE in non-modules
clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro
|
|
__xdp_build_skb_from_frame() was the last user of
{__,}xdp_release_frame(), which detaches pages from the page_pool.
All the consumers now recycle Page Pool skbs and page, except mlx5,
stmmac and tsnep drivers, which use page_pool_release_page() directly
(might change one day). It's safe to assume this functionality is not
needed anymore and can be removed (in favor of recycling).
Signed-off-by: Alexander Lobakin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
skb_mark_for_recycle() is guarded with CONFIG_PAGE_POOL, this creates
unneeded complication when using it in the generic code. For now, it's
only used in the drivers always selecting Page Pool, so this works.
Move the guards so that preprocessor will cut out only the operation
itself and the function will still be a noop on !PAGE_POOL systems,
but available there as well.
No functional changes.
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/oe-kbuild-all/[email protected]
Signed-off-by: Alexander Lobakin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
A while ago where the trace events had the following:
rcu_read_lock_sched_notrace();
rcu_dereference_sched(...);
rcu_read_unlock_sched_notrace();
If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).
But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.
The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).
Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.
Link: http://lore.kernel.org/lkml/[email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Joel Fernandes <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Xilinx IPI message buffers allows 32-byte data transfer.
Fix documentation that says 12 bytes
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <[email protected]>
Acked-by: Michal Simek <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Commit 6930bcbfb6ce dropped the setting of the file_lock range when
decoding a nlm_lock off the wire. This causes the client side grant
callback to miss matching blocks and reject the lock, only to rerequest
it 30s later.
Add a helper function to set the file_lock range from the start and end
values that the protocol uses, and have the nlm_lock decoder call that to
set up the file_lock args properly.
Fixes: 6930bcbfb6ce ("lockd: detect and reject lock arguments that overflow")
Reported-by: Amir Goldstein <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Tested-by: Amir Goldstein <[email protected]>
Cc: [email protected] #6.0
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Implement fbdev emulation that is optimized for drivers that use
DMA helpers. The buffers may no tbe moveable, may not require damage
handling and have to be located in system memory. This allows fbdev
emulation to operate directly on the buffer and mmap it to userspace.
Besides those constraints, the emulation works like in the generic
code. As an internal DRM client provides, it receives hotplug, restore
and unregister events. The DRM client is independent from the fbdev
probing, which runs on the first successful hotplug event.
The emulation is part of the DMA helper module and not build unless
DMA helpers and fbdev emulation has been configured.
Tested with vc4.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit 26fed4ac4eab ("block: flush plug based on hardware and software
queue order") changed flushing of plug list to submit requests one
device at a time. However while doing that it also started using
list_add_tail() instead of list_add() used previously thus effectively
submitting requests in reverse order. Also when forming a rq_list with
remaining requests (in case two or more devices are used), we
effectively reverse the ordering of the plug list for each device we
process. Submitting requests in reverse order has negative impact on
performance for rotational disks (when BFQ is not in use). We observe
10-25% regression in random 4k write throughput, as well as ~20%
regression in MariaDB OLTP benchmark on rotational storage on btrfs
filesystem.
Fix the problem by preserving ordering of the plug list when inserting
requests into the queuelist as well as by appending to requeue_list
instead of prepending to it.
Fixes: 26fed4ac4eab ("block: flush plug based on hardware and software queue order")
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
A new platform-op was added to Xen to allow obtaining the same VGA
console information PV Dom0 is handed. Invoke the new function and have
the output data processed by xen_init_vga().
Signed-off-by: Jan Beulich <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
substream->runtime will be attached when substream was opened
at snd_pcm_attach_substream(). When it uses DPCM,
FE substream->runtime is attached, but BE substream->runtime is not.
Thus, we are copying FE substream->runtime to BE.
But, we are copyig FE substream->runtime to FE dpcm->runtime first (A),
and copy it to BE dpcm->runtime (B), and copy it to
BE substream->runtime (C).
static int dpcm_fe_dai_open(...) {
...
(A) fe->dpcm[stream].runtime = fe_substream->runtime;
...
}
static int dpcm_be_connect(...) {
...
(B) be->dpcm[stream].runtime = fe->dpcm[stream].runtime;
...
}
int dpcm_be_dai_startup(...) {
...
(C) be_substream->runtime = be->dpcm[stream].runtime;
...
}
It is too roundabout and troublesome.
OTOH, it is directly copying fe_substream->runtime at dpcm_be_reparent()
without using be->dpcm[stream].runtime.
static void dpcm_be_reparent(...)
{
...
for_each_dpcm_fe(be, stream, dpcm) {
...
=> be_substream->runtime = fe_substream->runtime;
break;
}
}
This patch removes indirect copying.
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Peter Ujfalusi <[email protected]>:
The modules in IPC4 can have multiple 'pins' on their input and output
and these pins can receive or output audio in different formats.
Currently we assume that all pins are using the same format which is a
limitation that needs to be lifted in order to support more complex
components.
This series will extend and rework the format handling to allow
different formats on pins.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #1
A single patch to address a rather annoying bug w.r.t. guest timer
offsetting. Effectively the synchronization of timer offsets between
vCPUs was broken, leading to inconsistent timer reads within the VM.
|
|
This is part of the low-level API and should not be exposed to
top-level Crypto API users.
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move all stat code specific to rng into the rng code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move all stat code specific to skcipher into the skcipher code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move all stat code specific to kpp into the kpp code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move all stat code specific to acomp into the acomp code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move all stat code specific to hash into the hash code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move all stat code specific to akcipher into the akcipher code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move all stat code specific to aead into the aead code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <[email protected]>
|
|
The stats code resurrected the unions from the early days of
kernel crypto. This patch starts the process of moving them
out to the individual type structures as we do for everything
else.
In particular, add a report_stat function to cra_type and call
that from the stats code if available. This allows us to move
the actual code over one-by-one.
Signed-off-by: Herbert Xu <[email protected]>
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and samples in the bpf code still refer to this older
debugfs path, so let's update them to avoid confusion. There are a few
spots where the bpf code explicitly checks both tracefs and debugfs
(tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
those alone so that the tools can continue to work with both paths.
Signed-off-by: Ross Zwisler <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
From QUP HW Version 3.10 and above the Tx and Rx
fifo depth bits are increased to 23:16 bits from
21:16 bits in SE_HW_PARAM registers accomodating
256bytes of fifo depth.
Updated geni_se_get_tx_fifo_depth and
geni_se_get_rx_fifo_depth to retrieve right fifo
depth based on QUP HW version.
Signed-off-by: Visweswara Tanuku <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When a local kptr is stashed in a map and freed when the map goes away,
currently an error like the below appears:
[ 39.195695] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u32:15/2875
[ 39.196549] caller is bpf_mem_free+0x56/0xc0
[ 39.196958] CPU: 15 PID: 2875 Comm: kworker/u32:15 Tainted: G O 6.2.0-13016-g22df776a9a86 #4477
[ 39.197897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 39.198949] Workqueue: events_unbound bpf_map_free_deferred
[ 39.199470] Call Trace:
[ 39.199703] <TASK>
[ 39.199911] dump_stack_lvl+0x60/0x70
[ 39.200267] check_preemption_disabled+0xbf/0xe0
[ 39.200704] bpf_mem_free+0x56/0xc0
[ 39.201032] ? bpf_obj_new_impl+0xa0/0xa0
[ 39.201430] bpf_obj_free_fields+0x1cd/0x200
[ 39.201838] array_map_free+0xad/0x220
[ 39.202193] ? finish_task_switch+0xe5/0x3c0
[ 39.202614] bpf_map_free_deferred+0xea/0x210
[ 39.203006] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 39.203460] process_one_work+0x64f/0xbe0
[ 39.203822] ? pwq_dec_nr_in_flight+0x110/0x110
[ 39.204264] ? do_raw_spin_lock+0x107/0x1c0
[ 39.204662] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 39.205107] worker_thread+0x74/0x7a0
[ 39.205451] ? process_one_work+0xbe0/0xbe0
[ 39.205818] kthread+0x171/0x1a0
[ 39.206111] ? kthread_complete_and_exit+0x20/0x20
[ 39.206552] ret_from_fork+0x1f/0x30
[ 39.206886] </TASK>
This happens because the call to __bpf_obj_drop_impl I added in the patch
adding support for stashing local kptrs doesn't disable migration. Prior
to that patch, __bpf_obj_drop_impl logic only ran when called by a BPF
progarm, whereas now it can be called from map free path, so it's
necessary to explicitly disable migration.
Also, refactor a bit to just call __bpf_obj_drop_impl directly instead
of bothering w/ dtor union and setting pointer-to-obj_drop.
Fixes: c8e187540914 ("bpf: Support __kptr to local kptrs")
Reported-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Dave Marchevsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Merge SM7180 Global Clock Controller binding through a dedicated topic
branch, so that it can be introduced into the Devicetree source tree as
well in the same kernel release.
|
|
Add device tree bindings for global clock subsystem clock
controller for Qualcomm Technology Inc's SM7150 SoCs.
Co-developed-by: David Wronek <[email protected]>
Signed-off-by: David Wronek <[email protected]>
Signed-off-by: Danila Tikhonov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the SoC ID entry for SA8775P.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Eric Chanudet <[email protected]>
Tested-by: Eric Chanudet <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Virtio spec introduced a feature VIRTIO_NET_F_GUEST_HDRLEN which when
set implicates that device benefits from knowing the exact size
of the header. For compatibility, to signal to the device that
the header is reliable driver also needs to set this feature.
Without this feature set by driver, device has to figure
out the header size itself.
Quoting the original virtio spec:
"hdr_len is a hint to the device as to how much of the header needs to
be kept to copy into each packet"
"a hint" might not be clear for the reader what does it mean, if it is
"maybe like that" of "exactly like that". This feature just makes it
crystal clear and let the device count on the hdr_len being filled up
by the exact length of header.
Also note the spec already has following note about hdr_len:
"Due to various bugs in implementations, this field is not useful
as a guarantee of the transport header size."
Without this feature the device needs to parse the header in core
data path handling. Accurate information helps the device to eliminate
such header parsing and directly use the hardware accelerators
for GSO operation.
virtio_net_hdr_from_skb() fills up hdr_len to skb_headlen(skb).
The driver already complies to fill the correct value. Introduce the
feature and advertise it.
Note that virtio spec also includes following note for device
implementation:
"Caution should be taken by the implementation so as to prevent
a malicious driver from attacking the device by setting
an incorrect hdr_len."
There is a plan to support this feature in our emulated device.
A device of SolidRun offers this feature bit. They claim this feature
will save the device a few cycles for every GSO packet.
Link: https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-230006x3
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Reviewed-by: Alvaro Karsz <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 732ea9db9d8a ("efi: libstub: Move screen_info handling to common
code") reorganized the earlycon handling so that all architectures pass
the screen_info data via a EFI config table instead of populating struct
screen_info directly, as the latter is only possible when the EFI stub
is baked into the kernel (and not into the decompressor).
However, this means that struct screen_info may not have been populated
yet by the time the earlycon probe takes place, and this results in a
non-functional early console.
So let's probe again right after parsing the config tables and
populating struct screen_info. Note that this means that earlycon output
starts a bit later than before, and so it may fail to capture issues
that occur while doing the early EFI initialization.
Fixes: 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code")
Reported-by: Shawn Guo <[email protected]>
Tested-by: Shawn Guo <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Add device tree bindings for graphics clock controller for Qualcomm
Technology Inc's SM6115 SoCs.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add device tree bindings for graphics clock controller for Qualcomm
Technology Inc's SM6375 SoCs.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add device tree bindings for graphics clock controller for Qualcomm
Technology Inc's SM6125 SoCs.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In commit 3fbd7ee285b2b ("tasks: Add a count of task RCU users"), a
count on the number of RCU users was added to struct task_struct. This
was done so as to enable the removal of task_rcu_dereference(), and
allow tasks to be protected by RCU even after exiting and being removed
from the runqueue. In this commit, the 'refcount_t rcu_users' field that
keeps track of this refcount was put into a union co-located with
'struct rcu_head rcu', so as to avoid taking up any extra space in
task_struct. This was possible to do safely, because the field was only
ever decremented by a static set of specific callers, and then never
incremented again.
While this restriction of there only being a small, static set of users
of this field has worked fine, it prevents us from leveraging the field
to use RCU to protect tasks in other contexts.
During tracing, for example, it would be useful to be able to collect
some tasks that performed a certain operation, put them in a map, and
then periodically summarize who they are, which cgroup they're in, how
much CPU time they've utilized, etc. While this can currently be done
with 'usage', it becomes tricky when a task is already in a map, or if a
reference should only be taken if a task is valid and will not soon be
reaped. Ideally, we could do something like pass a reference to a map
value, and then try to acquire a reference to the task in an RCU read
region by using refcount_inc_not_zero().
Similarly, in sched_ext, schedulers are using integer pids to remember
tasks, and then looking them up with find_task_by_pid_ns(). This is
slow, error prone, and adds complexity. It would be more convenient and
performant if BPF schedulers could instead store tasks directly in maps,
and then leverage RCU to ensure they can be safely accessed with low
overhead.
Finally, overloading fields like this is error prone. Someone that wants
to use 'rcu_users' could easily overlook the fact that once the rcu
callback is scheduled, the refcount will go back to being nonzero, thus
precluding the use of refcount_inc_not_zero(). Furthermore, as described
below, it's possible to extract the fields of the union without changing
the size of task_struct.
There are several possible ways to enable this:
1. The lightest touch approach is likely the one proposed in this patch,
which is to simply extract 'rcu_users' and 'rcu' from the union, so
that scheduling the 'rcu' callback doesn't overwrite the 'rcu_users'
refcount. If we have a trusted task pointer, this would allow us to
use refcnt_inc_not_zero() inside of an RCU region to determine if we
can safely acquire a reference to the task and store it in a map. As
mentioned below, this can be done without changing the size of
task_struct, by moving the location of the union to another location
that has padding gaps we can fill in.
2. Removing 'refcount_t rcu_users', and instead having the entire task
be freed in an rcu callback. This is likely the most sound overall
design, though it changes the behavioral semantics exposed to
callers, who currently expect that a task that's successfully looked
up in e.g. the pid_list with find_task_by_pid_ns(), can always have a
'usage' reference acquired on them, as it's guaranteed to be >
0 until after the next gp. In order for this approach to work, we'd
have to audit all callers. This approach also slightly changes
behavior observed by user space by not invoking
trace_sched_process_free() until the whole task_struct is actually being
freed, rather than just after it's exited. It also may change
timings, as memory will be freed in an RCU callback rather than
immediately when the final 'usage' refcount drops to 0. This also is
arguably a benefit, as it provides more predictable performance to
callers who are refcounting tasks.
3. There may be other solutions as well that don't require changing the
layout of task_struct. For example, we could possibly do something
complex from the BPF side, such as listen for task exit and remove a
task from a map when the task is exiting. This would likely require
significant custom handling for task_struct in the verifier, so a
more generalizable solution is likely warranted.
As mentioned above, this patch proposes the lightest-touch approach
which allows callers elsewhere in the kernel to use 'rcu_users' to
ensure the lifetime of a task, by extracting 'rcu_users' and 'rcu' from
the union. There is no size change in task_struct with this patch.
Cc: Linus Torvalds <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: David Vernet <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|