| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.
Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.
The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.
This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.
The RSS type implementations for each driver comes as separate patches.
Fixes: 3d76a4d3d4e5 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/168132892042.340624.582563003880565460.stgit@firesoul
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Some drivers like iwlwifi might have per-STA queues, so we
may want to flush/drop just those queues rather than all
when removing a station. Add a separate method for that.
Signed-off-by: Johannes Berg <[email protected]>
|
|
The checks of whether or not a frame is bufferable were not
taking into account that some action frames aren't, such as
FTM. Check this, which requires some changes to the function
ieee80211_is_bufferable_mmpdu() since we need the whole skb
for the checks now.
Reviewed-by: Ilan Peer <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
WLAN_PUBLIC_ACTION_FTM_RESPONSE is duplicated with
WLAN_PUB_ACTION_FTM, but that might better be called
WLAN_PUB_ACTION_FTM_RESPONSE; clean up here.
Signed-off-by: Johannes Berg <[email protected]>
|
|
This provides a helper function to allow configuration of fault-injection
for configfs-based drivers.
The config items created by this function have the same interface as the
one created under debugfs by fault_create_debugfs_attr().
Signed-off-by: Akinobu Mita <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Since commit 5a7fbe452ad9 ("backlight: pwm_bl: Drop support for legacy PWM
probing") the last user of pwm_request() and pwm_free() is gone. So remove
these functions that were deprecated over 10 years ago in commit
8138d2ddbcca ("pwm: Add table-based lookup for static mappings").
Signed-off-by: Uwe Kleine-König <[email protected]>
[[email protected]: clean up a bit after removal]
Signed-off-by: Thierry Reding <[email protected]>
|
|
Some platforms have dwmac4 implementations that have a different
address space layout than the default, resulting in the need to define
their own DMA/MTL offsets.
Extend the functions to allow a platform driver to indicate what its
addresses are, overriding the defaults.
Signed-off-by: Andrew Halaney <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Tested-by: Brian Masney <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
It does not seem to be used by anyone and later patches in this series
are made simpler by first removing this. There is now a lot of dead code
that cannot be reached, until later patches revive it. Arguably, this is
preferred over removing the code only to add it again.
Signed-off-by: Patrik Dahlström <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This patch gives architecture specific code the ability to initialize
the cache level and allocate cacheinfo memory early, when cache level
initialization runs on the primary CPU for all possible CPUs.
This is part of a patch series that attempts to further the work in
commit 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU").
Previously, in the absence of any DT/ACPI cache info, architecture
specific cache detection and info allocation for secondary CPUs would
happen in non-preemptible context during early CPU initialization and
trigger a "BUG: sleeping function called from invalid context" splat on
an RT kernel.
More specifically, this patch adds the early_cache_level() function,
which is called by fetch_cache_info() as a fallback when the number of
cache leaves cannot be extracted from DT/ACPI. In the default generic
(weak) implementation, this new function returns -ENOENT, which
preserves the original behavior for architectures that do not implement
the function.
Since early detection can get the number of cache leaves wrong in some
cases*, additional logic is added to still call init_cache_level() later
on the secondary CPU, therefore giving the architecture specific code an
opportunity to go back and fix the initial guess. Again, the original
behavior is preserved for architectures that do not implement the new
function.
* For example, on arm64, CLIDR_EL1 detection works only when it runs on
the current CPU. In other words, a CPU cannot detect the cache depth
for any other CPU than itself.
Signed-off-by: Radu Rendec <[email protected]>
Reviewed-by: Pierre Gondois <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
No rdma device exposes its irq vectors affinity today. So the only
mapping that we have left, is the default blk_mq_map_queues, which
we fallback to anyways. Also fixup the only consumer of this helper
(nvme-rdma).
Remove this now dead code.
Signed-off-by: Sagi Grimberg <[email protected]>
Acked-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
The commits referenced below allows userspace to use the NLM_F_ECHO flag
for RTM_NEW/DELLINK operations to receive unicast notifications for the
affected link. Prior to these changes, applications may have relied on
multicast notifications to learn the same information without specifying
the NLM_F_ECHO flag.
For such applications, the mentioned commits changed the behavior for
requests not using NLM_F_ECHO. Multicast notifications are still received,
but now use the portid of the requester and the sequence number of the
request instead of zero values used previously. For the application, this
message may be unexpected and likely handled as a response to the
NLM_F_ACKed request, especially if it uses the same socket to handle
requests and notifications.
To fix existing applications relying on the old notification behavior,
set the portid and sequence number in the notification only if the
request included the NLM_F_ECHO flag. This restores the old behavior
for applications not using it, but allows unicasted notifications for
others.
Fixes: f3a63cce1b4f ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link")
Fixes: d88e136cab37 ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create")
Signed-off-by: Martin Willi <[email protected]>
Acked-by: Guillaume Nault <[email protected]>
Acked-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add two new kfuncs that allow a BPF tc-hook, installed on an ipip
device in collect-metadata mode, to control FOU encap parameters on a
per-packet level. The set of kfuncs is registered with the fou module.
The bpf_skb_set_fou_encap kfunc is supposed to be used in tandem and after
a successful call to the bpf_skb_set_tunnel_key bpf-helper. UDP source and
destination ports can be controlled by passing a struct bpf_fou_encap. A
source port of zero will auto-assign a source port. enum bpf_fou_encap_type
is used to specify if the egress path should FOU or GUE encap the packet.
On the ingress path bpf_skb_get_fou_encap can be used to read UDP source
and destination ports from the receiver's point of view and allows for
packet multiplexing across different destination ports within a single
BPF program and ipip device.
Signed-off-by: Christian Ehrig <[email protected]>
Link: https://lore.kernel.org/r/e17c94a646b63e78ce0dbf3f04b2c33dc948a32d.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Today ipip devices in collect-metadata mode don't allow for sending FOU
or GUE encapsulated packets. This patch lifts the restriction by adding
a struct ip_tunnel_encap to the tunnel metadata.
On the egress path, the members of this struct can be set by the
bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets
wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now
evaluates the contents of this struct and adds the corresponding FOU or
GUE header. Furthermore, it is making sure that additional header bytes
are taken into account for PMTU discovery.
On the ingress path, an ipip device in collect-metadata mode will fill this
struct and a BPF tc-hook can obtain the information via a call to the
bpf_skb_get_fou_encap kfunc.
The minor change to ip_tunnel_encap, which now takes a pointer to
struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control
FOU encap type and parameters on a per packet-level.
Signed-off-by: Christian Ehrig <[email protected]>
Link: https://lore.kernel.org/r/cfea47de655d0f870248abf725932f851b53960a.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We store one pre-allocated rsrc node in ->rsrc_backup_node, merge it
with ->rsrc_node_cache.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/6d5410e51ccd29be7a716be045b51d6b371baef6.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add event log processing for faulting of user batch descriptor completion
record.
When encountering an event log entry for a page fault on a completion
record, the driver is expected to do the following:
1. If the "first error in batch" bit in event log entry error info is
set, discard any previously recorded errors associated with the
"batch identifier".
2. Fix the page fault according to the fault address in the event log. If
successful, write the completion record to the fault address in user space.
3. If an error is encountered while writing the completion record and it is
associated to a descriptor in the batch, the driver associates the error
with the batch identifier of the event log entry and tracks it until the
event log entry for the corresponding batch desc is encountered.
While processing an event log entry for a batch descriptor with error
indicating that one or more descs in the batch had event log entries,
the driver will do the following before writing the batch completion
record:
1. If the status field of the completion record is 0x1, the driver will
change it to error code 0x5 (one or more operations in batch completed
with status not successful) and changes the result field to 1.
2. If the status is error code 0x6 (page fault on batch descriptor list
address), change the result field to 1.
3. If status is any other value, the completion record is not changed.
4. Clear the recorded error in preparation for next batch with same batch
identifier.
The result field is for user software to determine whether to set the
"Batch Error" flag bit in the descriptor for continuation of partial
batch descriptor completion. See DSA spec 2.0 for additional information.
If no error has been recorded for the batch, the batch completion record is
written to user space as is.
Tested-by: Tony Zhu <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The descs_completed field for a completion record is part of a batch
descriptor completion record. It takes the same location as bytes_completed
in a normal descriptor field. Add to expose to user.
Tested-by: Tony Zhu <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
DSA supports page fault handling through PRS. However, the DMA engine
that's processing the descriptor is blocked until the PRS response is
received. Other workqueues sharing the engine are also blocked.
Page fault handing by the driver with PRS disabled can be used to
mitigate the stalling.
With PRS disabled while ATS remain enabled, DSA handles page faults on
a completion record by reporting an event in the event log. In this
instance, the descriptor is completed and the event log contains the
completion record address and the contents of the completion record. Add
support to the event log handling code to fault in the completion record
and copy the content of the completion record to user memory.
A bitmap is introduced to keep track of discarded event log entries. When
the user process initiates ->release() of the char device, it no longer is
interested in any remaining event log entries tied to the relevant wq and
PASID. The driver will mark the event log entry index in the bitmap. Upon
encountering the entries during processing, the event log handler will just
clear the bitmap bit and skip the entry rather than attempt to process the
event log entry.
Tested-by: Tony Zhu <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Add debugfs entry to dump the content of the event log for debugging. The
function will dump all non-zero entries in the event log. It will note
which entries are processed and which entries are still pending processing
at the time of the dump. The entries may not always be in chronological
order due to the log is a circular buffer.
Tested-by: Tony Zhu <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
An event log interrupt is raised in the misc interrupt INTCAUSE register
when an event is written by the hardware. Add basic event log processing
support to the interrupt handler. The event log is a ring where the
hardware owns the tail and the software owns the head. The hardware will
advance the tail index when an additional event has been pushed to memory.
The software will process the log entry and then advances the head. The
log is full when (tail + 1) % log_size = head. The hardware will stop
writing when the log is full. The user is expected to create a log size
large enough to handle all the expected events.
Tested-by: Tony Zhu <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Add setup of event log feature for supported device. Event log addresses
error reporting that was lacking in gen 1 DSA devices where a second error
event does not get reported when a first event is pending software
handling. The event log allows a circular buffer that the device can push
error events to. It is up to the user to create a large enough event log
ring in order to capture the expected events. The evl size can be set in
the device sysfs attribute. By default 64 entries are supported as minimal
when event log is enabled.
Tested-by: Tony Zhu <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Check during cs35l56_system_resume() whether the firmware patch must
be applied again.
The FIRMWARE_MISSING flag in the PROTECTION_STATUS register indicates
whether the firmware has been patched.
In non-secure mode the FIRMWARE_MISSING flag is cleared at the end of
dsp_work(). If it is set after system-resume we know that dsp_work()
must be run again.
In secure mode the pre-OS loader will have done the secure patching
and cleared the FIRMWARE_MISSING flag. So this flag does not tell us
whether firmware memory was lost. But the driver could only be
downloading non-secure tunings, which is always safe to do.
If the driver has control of RESET we will have asserted it during
suspend so the firmware patch will have been lost. The driver would only
have control of RESET in non-secure mode.
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/168122674550.26.8545058503709956172@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <[email protected]>
|
|
Add the SDIO vendor ID for Realtek and some device IDs extracted from
their GPL vendor driver. This will be useful in the future when the
rtw88 driver gains support for these chips.
Acked-by: Ulf Hansson <[email protected]>
Reviewed-by: Ping-Ke Shih <[email protected]>
Reviewed-by: Pali Rohár <[email protected]>
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the definitions for the registers responsible for voltage
monitoring. Add a voltage monitor enable bitfield per regulator.
Reviewed-by: Matti Vaittinen <[email protected]>
Reviewed-by: Adam Ward <[email protected]>
Signed-off-by: Benjamin Bara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add support for runtime pm ops for AMD SoundWire manager driver.
Signed-off-by: Vijendar Mukunda <[email protected]>
Signed-off-by: Mastan Katragadda <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Add support for handling SoundWire manager interrupts.
Signed-off-by: Vijendar Mukunda <[email protected]>
Signed-off-by: Mastan Katragadda <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Register dai ops for SoundWire manager instances.
Signed-off-by: Vijendar Mukunda <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
AMD ACP(v6.x) IP block has two SoundWire manager devices.
Add support for
- Manager driver probe & remove sequence
- Helper functions to enable/disable interrupts,
Initialize sdw manager, enable sdw pads
- Manager driver sdw_master_ops & port_ops callbacks
Signed-off-by: Vijendar Mukunda <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.4 cycle.
New device support
* bosch,bmp280
- Add support for BMP580 - includes significant refactoring and general
driver cleanup + support for non-volatile memory for trimming and config
parameters.
* rohm BU27034
- New driver for this 3 channel ambient light sensor.
- New support library for devices where both integration time and
amplifier gain are configurable. In these cases a scale change
may require changing bother underlying values. This library module
provides code to help with this.
* st,accel
- Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
- Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
- New driver for these 16 bit ADCs.
* ti,tmp117
- Add support for older tmp116 device. Includes some general driver cleanup.
Staging driver drops
* adi,ade7854
- Driver was a very long way from compliant with IIO infrastructure and ABI.
If anyone wants a non staging version of this driver they are better off
starting from scratch. Hence drop it and the associated meter.h header.
Features
* adi,ad7441r
- Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
- Support older register mapping from firmware designed for windows.
Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
making them consistent and clear.
Cleanups and minor fixes:
* adi,ad5592r
- Add GPIO names - useful for debug.
* adi,ad7441r
- Fix current input, loop powered mode configuration setup.
* adi,adis16475
- Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
- Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
- Fix wrong bits for writing config register (late fix and has
been broken a long time so not rushed upstream)
* amlogic,meson-saradc
- Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
- Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
retries.
- Add local mutex to close various races.
- Use define U16_MAX rather than value for limit.
- Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
- Drop trivial dead code.
* kionix,kx022a
- Drop unused structure element.
* linear,ltc2983
- Reorganize bindings doc to enable unevaluatedProperties to be set
in one place for all child nodes.
- Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
- Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
- Missing static
* measurement-computing,cio-dac
- Fix wrong part name in comments.
- Migrate to regmap.
- Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
- Remove a check that can never fail.
* renesas,rcar-gyroadc
- DT binding documentation improvements.
- Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
- Drop docs for a structure element that doesn't exist.
* semtech,sx9500
- Drop ACPI_PTR() and of_match_ptr() protections that just complicate
the code / block some firmware registration types that would otherwise
work.
* sensiron,sps30
- Comment formatting tidy up.
* st,sensors
- Drop duplicate text in DT binding.
* st,stm32-adc
- Add some missing static markings.
* ti,ads1100
- Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
- General code cleanup / minor refactoring for better readabilty of code.
- Switch from boolean value to mask for adc_en2 field to avoid hard coding
a mask that will be different in AXP192
* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
MAINTAINERS: Add ROHM BU27034
iio: light: ROHM BU27034 Ambient Light Sensor
dt-bindings: iio: light: Support ROHM BU27034
MAINTAINERS: Add IIO gain-time-scale helpers
iio: light: Add gain-time-scale helpers
doc: Make sysfs-bus-iio doc more exact
iio: dac: set variable max5522_channels storage-class-specifier to static
dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
iio: addac: stx104: Migrate to the regmap API
iio: addac: stx104: Improve indentation in stx104_write_raw()
iio: addac: stx104: Use define rather than hardcoded limit for write val
iio: addac: stx104: Fix race condition when converting analog-to-digital
iio: addac: stx104: Fix race condition for stx104_write_raw()
dt-bindings: iio: st-sensors: Fix repeated text
staging: iio: resolver: ads1210: fix config mode
iio: adc: ti-ads1100: fix error code in probe()
iio: accel: add support for IIS328DQ variant
dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
...
|
|
Add new WQE type: FLOW_TBL_ACCESS, which will be used for
writing modify header arguments.
This type has specific control segment and special data segment.
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Reviewed-by: Alex Vesker <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add enum value for modify-header argument object and mlx5_bits
for the related capabilities.
Signed-off-by: Muhammad Sammar <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Reviewed-by: Alex Vesker <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Create a new profile for SFs in order to disable the command cache.
Each function command cache consumes ~500KB of memory, when using a
large number of SFs this savings is notable on memory constarined
systems.
Use a new profile to provide for future differences between SFs and PFs.
The mr_cache not used for non-PF functions, so it is excluded from the
new profile.
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Bodong Wang <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add the required hardware definitions to mlx5_ifc: fdb_uplink_hairpin,
fdb_multi_path_any_table_limit_regc, fdb_multi_path_any_table.
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Maor Dickman <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
As per Linus's suggestion
(https://lore.kernel.org/r/CAHk-=whefxRGyNGzCzG6BVeM=5vnvgb-XhSeFJVxJyAxAF8XRA@mail.gmail.com),
use WARN_ON_ONCE instead of WARN_ON. This barely adds any extra
overhead, and it makes it so that if any of these ever becomes reachable
(they shouldn't, but that's the point), the logs can't be flooded.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
|
|
The iblock pr_ops support does not support commands that require port or
I_T Nexus info. This adds a struct target_opcode_descriptor as an argument
to the enabled callout so we can still have the common tcm_is_pr_enabled
and tcm_is_scsi2_reservations_enabled functions and also determine if the
command is supported based on the command and service action and device
settings.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
For the cases where you want to export a device to a VM via a single
I_T nexus and want to passthrough the PR handling to the physical/real
device you have to use pscsi or tcmu. Both are good for specific uses
however for the case where you want good performance, and are not using
SCSI devices directly (using DM/MD RAID or multipath devices) then we are
out of luck.
The following patches allow iblock to mimimally hook into the LIO PR code
and then pass the PR handling to the physical device. Note that like with
the tcmu an pscsi cases it's only supported when you export the device via
one I_T nexus.
This patch adds the initial LIO callouts. The next patch will modify
iblock.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The next patches allow us to call the block layer's pr_ops from the
backends. This will require allowing the backends to hook into the cmd
processing for SPC commands, so this renames sbc_ops to a more generic
exec_cmd_ops.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The next patch adds support to report the reservation type, so we need to
be able to convert from the NVMe PR value we get from the device to the
linux block layer PR value that will be returned to callers. To prepare
for that, this patch adds a nvme_pr_type enum and renames the nvme_pr_type
function.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This patch adds support for the pr_ops read_keys callout by calling the
NVMe Reservation Report helper, then parsing that info to get the
controller's registered keys. Because the callout is only used in the
kernel where the callers, like LIO, do not know about controller/host IDs,
the callout just returns the registered keys which is required by the SCSI
PR in READ KEYS command.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This fixes the following issues with the reservation status structs:
1. resv10 is bytes 23:10 so it should be 14 bytes.
2. regctl_ds only supports 64 bit host IDs.
These are not currently used, but will be in this patchset which adds
support for the reservation report command.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This adds support in sd.c for the block PR read keys and read reservation
callouts, so upper layers like LIO can get the PR info that's been setup
using the existing pr callouts and return it to initiators.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
LIO is going to want to do the same block to/from SCSI pr types as sd.c
so this moves the sd_pr_type helper to scsi_common and renames it. The
next patch will then also add a helper to go from the SCSI value to the
block one for use with PERSISTENT_RESERVE_IN commands.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
BLK_STS_NEXUS is used for NVMe/SCSI reservation conflicts and DASD's
locking feature which works similar to NVMe/SCSI reservations where a
host can get a lock on a device and when the lock is taken it will get
failures.
This patch renames BLK_STS_NEXUS so it better reflects this type of
use.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Stefan Haberland <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add callouts for reading keys and reservations. This allows LIO to support
the READ_KEYS and READ_RESERVATION commands so it can export devices to
VMs for software like windows clustering.
Signed-off-by: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Make sqe_base_addr the UTRD pointer it is, instead of an opaque void *.
Signed-off-by: Avri Altman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
NFSv3 includes pre/post wcc attributes which allow the client to
determine if all changes to the file have been made by the client
itself, or if any might have been made by some other client.
If there are gaps in the pre/post ctime sequence it must be assumed that
some other client changed the file in that gap and the local cache must
be suspect. The next time the file is opened the cache should be
invalidated.
Since Commit 1c341b777501 ("NFS: Add deferred cache invalidation for
close-to-open consistency violations") in linux 5.3 the Linux client has
been triggering this invalidation. The chunk in nfs_update_inode() in
particularly triggers.
Unfortunately Linux NFS assumes that all replies will be processed in
the order sent, and will arrive in the order processed. This is not
true in general. Consequently Linux NFS might ignore the wcc info in a
WRITE reply because the reply is in response to a WRITE that was sent
before some other request for which a reply has already been seen. This
is detected by Linux using the gencount tests in nfs_inode_attr_cmp().
Also, when the gencount tests pass it is still possible that the request
were processed on the server in a different order, and a gap seen in
the ctime sequence might be filled in by a subsequent reply, so gaps
should not immediately trigger delayed invalidation.
The net result is that writing to a server and then reading the file
back can result in going to the server for the read rather than serving
it from cache - all because a couple of replies arrived out-of-order.
This is a performance regression over kernels before 5.3, though the
change in 5.3 is a correctness improvement.
This has been seen with Linux writing to a Netapp server which
occasionally re-orders requests. In testing the majority of requests
were in-order, but a few (maybe 2 or three at a time) could be
re-ordered.
This patch addresses the problem by recording any gaps seen in the
pre/post ctime sequence and not triggering invalidation until either
there are too many gaps to fit in the table, or until there are no more
active writes and the remaining gaps cannot be resolved.
We allocate a table of 16 gaps on demand. If the allocation fails we
revert to current behaviour which is of little cost as we are unlikely
to be able to cache the writes anyway.
In the table we store "start->end" pair when iversion is updated and
"end<-start" pairs pre/post pairs reported by the server. Usually these
exactly cancel out and so nothing is stored. When there are
out-of-order replies we do store gaps and these will eventually be
cancelled against later replies when this client is the only writer.
If the final write is out-of-order there may be one gap remaining when
the file is closed. This will be noticed and if there is precisely on
gap and if the iversion can be advanced to match it, then we do so.
This patch makes no attempt to handle directories correctly. The same
problem potentially exists in the out-of-order replies to create/unlink
requests can cause future lookup requires to be sent to the server
unnecessarily. A similar scheme using the same primitives could be used
to notice and handle out-of-order replies.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Provide pci_msix_can_alloc_dyn() stub when CONFIG_PCI_MSI unset to
avoid build errors (Reinette Chatre)
- Quirk AMD XHCI controller that loses MSI-X state in D3hot to avoid
broken USB after hotplug or suspend/resume (Basavaraj Natikar)
- Fix use-after-free in pci_bus_release_domain_nr() (Rob Herring)
* tag 'pci-v6.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix use-after-free in pci_bus_release_domain_nr()
x86/PCI: Add quirk for AMD XHCI controller that loses MSI-X state in D3hot
PCI/MSI: Provide missing stub for pci_msix_can_alloc_dyn()
|
|
Since commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default"), the delayed registering of
acpi_video# backlight devices has been disabled by default.
The few bugreports where this option was used as a workaround were all
cases where the GPU driver did not call acpi_video_register_backlight()
and the workaround was to pass video.register_backlight_delay=1.
With the recent "ACPI: video: Make acpi_backlight=video work independent
from GPU driver" changes acpi_backlight=video can be used to achieve
the same result. So there is no need for the register_backlight_delay
option + code anymore.
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The NFS specific trace points are no longer needed as tracing is well
covered by netfs and fscache.
Signed-off-by: Dave Wysochanski <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Tested-by: Daire Byrne <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
The old NFSIOS_FSCACHE counters are no longer accurate or useful with
the conversion to the new netfs API. The new API does not have a page
based interface, and so the counters in nfs_stat_fscachecounters are
no longer obtainable. The new netfs the API has extensive statistics
inside /proc/fs/fscache/stats so we no longer need NFS specific fscache
stats.
Note this also removes the 'fsc:' line from /proc/self/mountstats so
it will be a user-visible change.
Signed-off-by: Dave Wysochanski <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Tested-by: Daire Byrne <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Convert the NFS buffered read code paths to corresponding netfs APIs,
but only when fscache is configured and enabled.
The netfs API defines struct netfs_request_ops which must be filled
in by the network filesystem. For NFS, we only need to define 5 of
the functions, the main one being the issue_read() function.
The issue_read() function is called by the netfs layer when a read
cannot be fulfilled locally, and must be sent to the server (either
the cache is not active, or it is active but the data is not available).
Once the read from the server is complete, netfs requires a call to
netfs_subreq_terminated() which conveys either how many bytes were read
successfully, or an error. Note that issue_read() is called with a
structure, netfs_io_subrequest, which defines the IO requested, and
contains a start and a length (both in bytes), and assumes the underlying
netfs will return a either an error on the whole region, or the number
of bytes successfully read.
The NFS IO path is page based and the main APIs are the pgio APIs defined
in pagelist.c. For the pgio APIs, there is no way for the caller to
know how many RPCs will be sent and how the pages will be broken up
into underlying RPCs, each of which will have their own completion and
return code. In contrast, netfs is subrequest based, a single
subrequest may contain multiple pages, and a single subrequest is
initiated with issue_read() and terminated with netfs_subreq_terminated().
Thus, to utilze the netfs APIs, NFS needs some way to accommodate
the netfs API requirement on the single response to the whole
subrequest, while also minimizing disruptive changes to the NFS
pgio layer.
The approach taken with this patch is to allocate a small structure
for each nfs_netfs_issue_read() call, store the final error and number
of bytes successfully transferred in the structure, and update these values
as each RPC completes. The refcount on the structure is used as a marker
for the last RPC completion, is incremented in nfs_netfs_read_initiate(),
and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header
contains a valid pointer to the data. On the final put (which signals
the final outstanding RPC is complete) in nfs_netfs_read_completion(),
call netfs_subreq_terminated() with either the final error value (if
one or more READs complete with an error) or the number of bytes
successfully transferred (if all RPCs complete successfully). Note
that when all RPCs complete successfully, the number of bytes transferred
is capped to the length of the subrequest. Capping the transferred length
to the subrequest length prevents "Subreq overread" warnings from netfs.
This is due to the "aligned_len" in nfs_pageio_add_page(), and the
corner case where NFS requests a full page at the end of the file,
even when i_size reflects only a partial page (NFS overread).
Signed-off-by: Dave Wysochanski <[email protected]>
Tested-by: Daire Byrne <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|