| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
In the function percpu_rwsem_release, the parameter `read`
is unused, so remove it.
Signed-off-by: Wang Long <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
When deactivating any type of superblock, it had to wait for the in-flight
wb switches to be completed. wb switches are executed in inode_switch_wbs_work_fn()
which needs to acquire the wb_switch_rwsem and races against sync_inodes_sb().
If there are too much dirty data in the superblock, the waiting time may increase
significantly.
For superblocks without cgroup writeback such as tmpfs, they have nothing to
do with the wb swithes, so the flushing can be avoided.
Signed-off-by: Haifeng Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jan Kara <[email protected]>
Suggested-by: Jan Kara <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Systemd has a helper called openat_report_new() that returns whether a
file was created anew or it already existed before for cases where
O_CREAT has to be used without O_EXCL (cf. [1]). That apparently isn't
something that's specific to systemd but it's where I noticed it.
The current logic is that it first attempts to open the file without
O_CREAT | O_EXCL and if it gets ENOENT the helper tries again with both
flags. If that succeeds all is well. If it now reports EEXIST it
retries.
That works fairly well but some corner cases make this more involved. If
this operates on a dangling symlink the first openat() without O_CREAT |
O_EXCL will return ENOENT but the second openat() with O_CREAT | O_EXCL
will fail with EEXIST. The reason is that openat() without O_CREAT |
O_EXCL follows the symlink while O_CREAT | O_EXCL doesn't for security
reasons. So it's not something we can really change unless we add an
explicit opt-in via O_FOLLOW which seems really ugly.
The caller could try and use fanotify() to register to listen for
creation events in the directory before calling openat(). The caller
could then compare the returned tid to its own tid to ensure that even
in threaded environments it actually created the file. That might work
but is a lot of work for something that should be fairly simple and I'm
uncertain about it's reliability.
The caller could use a bpf lsm hook to hook into security_file_open() to
figure out whether they created the file. That also seems a bit wild.
So let's add F_CREATED_QUERY which allows the caller to check whether
they actually did create the file. That has caveats of course but I
don't think they are problematic:
* In multi-threaded environments a thread can only be sure that it did
create the file if it calls openat() with O_CREAT. In other words,
it's obviously not enough to just go through it's fdtable and check
these fds because another thread could've created the file.
* If there's any codepaths where an openat() with O_CREAT would yield
the same struct file as that of another thread it would obviously
cause wrong results. I'm not aware of any such codepaths from openat()
itself. Imho, that would be a bug.
* Related to the previous point, calling the new fcntl() on files created
and opened via special-purpose system calls or ioctl()s would cause
wrong results only if the affected subsystem a) raises FMODE_CREATED
and b) may return the same struct file for two different calls. I'm
not seeing anything outside of regular VFS code that raises
FMODE_CREATED.
There is code for b) in e.g., the drm layer where the same struct file
is resurfaced but again FMODE_CREATED isn't used and it would be very
misleading if it did.
Link: https://github.com/systemd/systemd/blob/11d5e2b5fbf9f6bfa5763fd45b56829ad4f0777f/src/basic/fs-util.c#L1078 [1]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jeff Layton <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Intel platforms have enabled 4 links since the beginning, newer
platforms now have 5 links. Update the definition accordingly.
This patch will have no effect on older platforms where the number of
links was hard-coded. A follow-up patch will add a dynamic check that
the ACPI-reported information is aligned with hardware capabilities on
newer platforms.
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add
a probe-time check to make sure the ACPI-reported information with
_DSD properties is aligned with hardware capabilities reported in the
SoundWire LCAP register.
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The definitions are currently duplicated in intel-sdw-acpi.c and
sof_sdw.c. Move the definition to the sdw_intel.h header, and change
the prefix to make it Intel-specific.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Pull ALSA sequencer cleanup.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Refactor the list of constant variables into a macro.
This should make it easier to add more constants in the future.
Signed-off-by: Jann Horn <[email protected]>
Reviewed-by: Alexander Gordeev <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the usb / thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
|
|
'inline' keyword is only a recommendation for compiler. If it decides to
not inline nodemask functions, the whole small_const_nbits() machinery
doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/[email protected]/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
On recent (v6.6+) builds with Clang (based on Clang 18.0.0) and certain
configurations [0], I'm finding that (lack of) inlining decisions may
lead to section mismatch warnings like the following:
WARNING: modpost: vmlinux.o: section mismatch in reference:
cpumask_andnot (section: .text) ->
cpuhp_bringup_cpus_parallel.tmp_mask (section: .init.data) ERROR:
modpost: Section mismatches detected.
or more confusingly:
WARNING: modpost: vmlinux: section mismatch in reference:
cpumask_andnot+0x5f (section: .text) -> efi_systab_phys (section:
.init.data)
The first warning makes a little sense, because
cpuhp_bringup_cpus_parallel() (an __init function) calls
cpumask_andnot() on tmp_mask (an __initdata symbol). If the compiler
doesn't inline cpumask_andnot(), this may appear like a mismatch.
The second warning makes less sense, but might be because efi_systab_phys
and cpuhp_bringup_cpus_parallel.tmp_mask are laid out near each other,
and the latter isn't a proper C symbol definition.
In any case, it seems a reasonable solution to suggest more strongly to
the compiler that these cpumask macros *must* be inlined, as 'inline' is
just a recommendation.
This change has been previously proposed in the past as:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/[email protected]/
But the change has been split up, to separately justify the cpumask
changes (which drive my work) and the bitmap/const optimizations (that
Yury separately proposed for other reasons). This ends up as somewhere
between a "rebase" and "rewrite" -- I had to rewrite most of the patch.
According to bloat-o-meter, vmlinux decreases minimally in size (-0.00%
to -0.01%, depending on the version of GCC or Clang and .config in
question) with this series of changes:
gcc 13.2.0, x86_64_defconfig
-3005 bytes, Before=21944501, After=21941496, chg -0.01%
clang 16.0.6, x86_64_defconfig
-105 bytes, Before=22571692, After=22571587, chg -0.00%
gcc 9.5.0, x86_64_defconfig
-1771 bytes, Before=21557598, After=21555827, chg -0.01%
clang 18.0_pre516547 (ChromiumOS toolchain), x86_64_defconfig
-191 bytes, Before=22615339, After=22615148, chg -0.00%
clang 18.0_pre516547 (ChromiumOS toolchain), based on ChromiumOS config + gcov
-979 bytes, Before=76294783, After=76293804, chg -0.00%
[0] CONFIG_HOTPLUG_PARALLEL=y ('select'ed for x86 as of [1]) and
CONFIG_GCOV_PROFILE_ALL.
[1] commit 0c7ffa32dbd6 ("x86/smpboot/64: Implement
arch_cpuhp_init_parallel_bringup() and enable it")
Co-developed-by: Brian Norris <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
'inline' keyword is only a recommendation for compiler. If it decides to
not inline bitmap functions, the whole small_const_nbits() machinery
doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/[email protected]/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
'inline' keyword is only a recommendation for compiler. If it decides to
not inline find_bit nodemask functions, the whole small_const_nbits()
machinery doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/[email protected]/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
Implement two ioctl calls in order to support virtual userspace-driven
ALSA timers.
The first ioctl is SNDRV_TIMER_IOCTL_CREATE, which gets the
snd_timer_uinfo struct as a parameter and puts a file descriptor of a
virtual timer into the `fd` field of the snd_timer_unfo structure. It
also updates the `id` field of the snd_timer_uinfo struct, which
provides a unique identifier for the timer (basically, the subdevice
number which can be used when creating timer instances).
This patch also introduces a tiny id allocator for the userspace-driven
timers, which guarantees that we don't have more than 128 of them in the
system.
Another ioctl is SNDRV_TIMER_IOCTL_TRIGGER, which allows us to trigger
the virtual timer (and calls snd_timer_interrupt for the timer under
the hood), causing all of the timer instances binded to this timer to
execute their callbacks.
The maximum amount of ticks available for the timer is 1 for the sake of
simplicity of the userspace API. 'start', 'stop', 'open' and 'close'
callbacks for the userspace-driven timers are empty since we don't
really do any hardware initialization here.
Suggested-by: Axel Holzinger <[email protected]>
Signed-off-by: Ivan Orlov <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C core fix replacing IS_ENABLED() with IS_REACHABLE()
For host drivers, there are two fixes:
- Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
- Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the previous
release"
* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Do not mark ACPI devices as irq safe
i2c: Use IS_REACHABLE() for substituting empty ACPI functions
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
|
|
These functions are never implemented and used.
Signed-off-by: Yue Haibing <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
In the absence of an explicit cgroup slice configureation, make mixed
slice length work with cgroups by propagating the min_slice up the
hierarchy.
This ensures the cgroup entity gets timely service to service its
entities that have this timing constraint set on them.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Allow applications to directly set a suggested request/slice length using
sched_attr::sched_runtime.
The implementation clamps the value to: 0.1[ms] <= slice <= 100[ms]
which is 1/10 the size of HZ=1000 and 10 times the size of HZ=100.
Applications should strive to use their periodic runtime at a high
confidence interval (95%+) as the target slice. Using a smaller slice
will introduce undue preemptions, while using a larger value will
increase latency.
For all the following examples assume a scheduling quantum of 8, and for
consistency all examples have W=4:
{A,B,C,D}(w=1,r=8):
ABCD...
+---+---+---+---
t=0, V=1.5 t=1, V=3.5
A |------< A |------<
B |------< B |------<
C |------< C |------<
D |------< D |------<
---+*------+-------+--- ---+--*----+-------+---
t=2, V=5.5 t=3, V=7.5
A |------< A |------<
B |------< B |------<
C |------< C |------<
D |------< D |------<
---+----*--+-------+--- ---+------*+-------+---
Note: 4 identical tasks in FIFO order
~~~
{A,B}(w=1,r=16) C(w=2,r=16)
AACCBBCC...
+---+---+---+---
t=0, V=1.25 t=2, V=5.25
A |--------------< A |--------------<
B |--------------< B |--------------<
C |------< C |------<
---+*------+-------+--- ---+----*--+-------+---
t=4, V=8.25 t=6, V=12.25
A |--------------< A |--------------<
B |--------------< B |--------------<
C |------< C |------<
---+-------*-------+--- ---+-------+---*---+---
Note: 1 heavy task -- because q=8, double r such that the deadline of the w=2
task doesn't go below q.
Note: observe the full schedule becomes: W*max(r_i/w_i) = 4*2q = 8q in length.
Note: the period of the heavy task is half the full period at:
W*(r_i/w_i) = 4*(2q/2) = 4q
~~~
{A,C,D}(w=1,r=16) B(w=1,r=8):
BAACCBDD...
+---+---+---+---
t=0, V=1.5 t=1, V=3.5
A |--------------< A |---------------<
B |------< B |------<
C |--------------< C |--------------<
D |--------------< D |--------------<
---+*------+-------+--- ---+--*----+-------+---
t=3, V=7.5 t=5, V=11.5
A |---------------< A |---------------<
B |------< B |------<
C |--------------< C |--------------<
D |--------------< D |--------------<
---+------*+-------+--- ---+-------+--*----+---
t=6, V=13.5
A |---------------<
B |------<
C |--------------<
D |--------------<
---+-------+----*--+---
Note: 1 short task -- again double r so that the deadline of the short task
won't be below q. Made B short because its not the leftmost task, but is
eligible with the 0,1,2,3 spread.
Note: like with the heavy task, the period of the short task observes:
W*(r_i/w_i) = 4*(1q/1) = 4q
~~~
A(w=1,r=16) B(w=1,r=8) C(w=2,r=16)
BCCAABCC...
+---+---+---+---
t=0, V=1.25 t=1, V=3.25
A |--------------< A |--------------<
B |------< B |------<
C |------< C |------<
---+*------+-------+--- ---+--*----+-------+---
t=3, V=7.25 t=5, V=11.25
A |--------------< A |--------------<
B |------< B |------<
C |------< C |------<
---+------*+-------+--- ---+-------+--*----+---
t=6, V=13.25
A |--------------<
B |------<
C |------<
---+-------+----*--+---
Note: 1 heavy and 1 short task -- combine them all.
Note: both the short and heavy task end up with a period of 4q
~~~
A(w=1,r=16) B(w=2,r=16) C(w=1,r=8)
BBCAABBC...
+---+---+---+---
t=0, V=1 t=2, V=5
A |--------------< A |--------------<
B |------< B |------<
C |------< C |------<
---+*------+-------+--- ---+----*--+-------+---
t=3, V=7 t=5, V=11
A |--------------< A |--------------<
B |------< B |------<
C |------< C |------<
---+------*+-------+--- ---+-------+--*----+---
t=7, V=15
A |--------------<
B |------<
C |------<
---+-------+------*+---
Note: as before but permuted
~~~
From all this it can be deduced that, for the steady state:
- the total period (P) of a schedule is: W*max(r_i/w_i)
- the average period of a task is: W*(r_i/w_i)
- each task obtains the fair share: w_i/W of each full period P
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
During OSPM24 Youssef noted that migrations are re-setting the virtual
deadline. Notably everything that does a dequeue-enqueue, like setting
nice, changing preferred numa-node, and a myriad of other random crap,
will cause this to happen.
This shouldn't be. Preserve the relative virtual deadline across such
dequeue/enqueue cycles.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The special task states are those that do not suffer spurious wakeups,
TASK_FROZEN is very much one of those, mark it as such.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
While most of the delayed dequeue code can be done inside the
sched_class itself, there is one location where we do not have an
appropriate hook, namely ttwu_runnable().
Add an ENQUEUE_DELAYED call to the on_rq path to deal with waking
delayed dequeue tasks.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The remaining functions added by commit
a8ea8bdd9df92a0e5db5b43900abb7a288b8a53e did not check for memory
allocation errors. Add the checks and change the API to allow errors
to be returned.
Fixes: a8ea8bdd9df9 ("lib/mpi: Extend the MPI library")
Signed-off-by: Herbert Xu <[email protected]>
|
|
This partially reverts commit a8ea8bdd9df92a0e5db5b43900abb7a288b8a53e.
Most of it is no longer needed since sm2 has been removed. However,
the following functions have been kept as they have developed other
uses:
mpi_copy
mpi_mod
mpi_test_bit
mpi_set_bit
mpi_rshift
mpi_add
mpi_sub
mpi_addm
mpi_subm
mpi_mul
mpi_mulm
mpi_tdiv_r
mpi_fdiv_r
Signed-off-by: Herbert Xu <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Add error handling to pair_device()
- HCI: Invert LE State quirk to be opt-out rather then opt-in
- hci_core: Fix LE quote calculation
- SMP: Fix assumption of Central always being Initiator
* tag 'for-net-2024-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Add error handling to pair_device()
Bluetooth: SMP: Fix assumption of Central always being Initiator
Bluetooth: hci_core: Fix LE quote calculation
Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
capabilities register
'Legacy Queue & Single Doorbell Support (LSDBS)' field in the controller
capabilities register is supposed to report whether the legacy single
doorbell mode is supported in the controller or not. But some controllers
report '1' in this field which corresponds to 'LSDB not supported', but
they indeed support LSDB. So let's add a quirk to handle those controllers.
If the quirk is enabled by the controller driver, then LSDBS register field
will be ignored and legacy single doorbell mode is assumed to be enabled
always.
Tested-by: Amit Pundir <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
scsi_logical_block_count() should return the block count of a given SCSI
command. The original implementation ended up shifting twice, leading to an
incorrect count being returned. Fix the conversion between bytes and
logical blocks.
Cc: [email protected]
Fixes: 6a20e21ae1e2 ("scsi: core: Add helper to return number of logical blocks in a request")
Signed-off-by: Chaotian Jing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a comment in the uapi header using the wrong member name (Caleb)
- Fix KCSAN warning for a debug check in sqpoll (me)
- Two more NAPI tweaks (Olivier)
* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
io_uring: fix user_data field name in comment
io_uring/sqpoll: annotate debug task == current with data_race()
io_uring/napi: remove duplicate io_napi_entry timeout assignation
io_uring/napi: check napi_enabled in io_napi_add() before proceeding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a Bang-bang thermal governor issue causing it to fail to reset the
state of cooling devices if they are 'on' to start with, but the
thermal zone temperature is always below the corresponding trip point
(Rafael Wysocki)"
* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_bang_bang: Use governor_data to reduce overhead
thermal: gov_bang_bang: Add .manage() callback
thermal: gov_bang_bang: Split bang_bang_control()
thermal: gov_bang_bang: Call __thermal_cdev_update() directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an issue related to the ACPI EC device handling that causes the
_REG control method to be evaluated for EC operation regions that are
not expected to be used.
This confuses the platform firmware and provokes various types of
misbehavior on some systems (Rafael Wysocki)"
* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate _REG outside the EC scope more carefully
ACPICA: Add a depth argument to acpi_execute_reg_methods()
Revert "ACPI: EC: Evaluate orphan _REG under EC device"
|
|
io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.
Signed-off-by: Caleb Sander Mateos <[email protected]>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: iavf: add support for TC U32 filters on VFs
Ahmed Zaki says:
The Intel Ethernet 800 Series is designed with a pipeline that has
an on-chip programmable capability called Dynamic Device Personalization
(DDP). A DDP package is loaded by the driver during probe time. The DDP
package programs functionality in both the parser and switching blocks in
the pipeline, allowing dynamic support for new and existing protocols.
Once the pipeline is configured, the driver can identify the protocol and
apply any HW action in different stages, for example, direct packets to
desired hardware queues (flow director), queue groups or drop.
Patches 1-8 introduce a DDP package parser API that enables different
pipeline stages in the driver to learn the HW parser capabilities from
the DDP package that is downloaded to HW. The parser library takes raw
packet patterns and masks (in binary) indicating the packet protocol fields
to be matched and generates the final HW profiles that can be applied at
the required stage. With this API, raw flow filtering for FDIR or RSS
could be done on new protocols or headers without any driver or Kernel
updates (only need to update the DDP package). These patches were submitted
before [1] but were not accepted mainly due to lack of a user.
Patches 9-11 extend the virtchnl support to allow the VF to request raw
flow director filters. Upon receiving the raw FDIR filter request, the PF
driver allocates and runs a parser lib instance and generates the hardware
profile definitions required to program the FDIR stage. These were also
submitted before [2].
Finally, patches 12 and 13 add TC U32 filter support to the iavf driver.
Using the parser API, the ice driver runs the raw patterns sent by the
user and then adds a new profile to the FDIR stage associated with the VF's
VSI. Refer to examples in patch 13 commit message.
[1]: https://lore.kernel.org/netdev/[email protected]/
[2]: https://lore.kernel.org/intel-wired-lan/[email protected]/
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add support for offloading tc U32 cls filters
iavf: refactor add/del FDIR filters
ice: enable FDIR filters from raw binary patterns for VFs
ice: add method to disable FDIR SWAP option
virtchnl: support raw packet in protocol header
ice: add API for parser profile initialization
ice: add UDP tunnels support to the parser
ice: support turning on/off the parser's double vlan mode
ice: add parser execution main loop
ice: add parser internal helper functions
ice: add debugging functions for the parser sections
ice: parse and init various DDP parser sections
ice: add parser create and destroy skeleton
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Add helpers to convert an ipv6 addr, expressed as an array
of words, from CPU to big-endian byte order, and vice versa.
No functional change intended.
Compile tested only.
Suggested-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add new result codes to support TDR diagnostics in preparation for
Open Alliance 1000BaseT1 TDR support:
- ETHTOOL_A_CABLE_RESULT_CODE_NOISE: TDR not possible due to high noise
level.
- ETHTOOL_A_CABLE_RESULT_CODE_RESOLUTION_NOT_POSSIBLE: TDR resolution not
possible / out of distance.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Bring back a lost return statement in io-page-fault code
- Remove an unused function declaration
* tag 'iommu-fixes-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Remove unused declaration iommu_sva_unbind_gpasid()
iommu: Restore lost return in iommu_report_device_fault()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small fixes, mostly for usual suspects, HD-audio and USB-audio
device-specific fixes / quirks. The Cirrus codec support took the
update of SPI header as well. Other than that, there is a regression
fix in the sanity check of ALSA timer code"
* tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/tas2781: Use correct endian conversion
ALSA: usb-audio: Support Yamaha P-125 quirk entry
ALSA: hda: cs35l41: Remove redundant call to hda_cs_dsp_control_remove()
ALSA: hda: cs35l56: Remove redundant call to hda_cs_dsp_control_remove()
ALSA: hda/tas2781: fix wrong calibrated data order
ALSA: usb-audio: Add delay quirk for VIVO USB-C-XE710 HEADSET
ALSA: hda/realtek: Add support for new HP G12 laptops
ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7
ALSA: timer: Relax start tick time check for slave timer elements
spi: Add empty versions of ACPI functions
|
|
Armv9.4/8.9 PMU adds optional support for a fixed instruction counter
similar to the fixed cycle counter. Support for the feature is indicated
in the ID_AA64DFR1_EL1 register PMICNTR field. The counter is not
accessible in AArch32.
Existing userspace using direct counter access won't know how to handle
the fixed instruction counter, so we have to avoid using the counter
when user access is requested.
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Rob Herring (Arm) <[email protected]>
Tested-by: James Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
There are 2 defines for the number of PMU counters:
ARMV8_PMU_MAX_COUNTERS and ARMPMU_MAX_HWEVENTS. Both are the same
currently, but Armv9.4/8.9 increases the number of possible counters
from 32 to 33. With this change, the maximum number of counters will
differ for KVM's PMU emulation which is PMUv3.4. Give KVM PMU emulation
its own define to decouple it from the rest of the kernel's number PMU
counters.
The VHE PMU code needs to match the PMU driver, so switch it to use
ARMPMU_MAX_HWEVENTS instead.
Acked-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Signed-off-by: Rob Herring (Arm) <[email protected]>
Tested-by: James Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The PMUv3 and KVM code each have a define for the PMU cycle counter
index. Move KVM's define to a shared location and use it for PMUv3
driver.
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Rob Herring (Arm) <[email protected]>
Tested-by: James Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
ARMV8_PMU_COUNTER_MASK is really a mask for the PMSELR_EL0.SEL register
field. Make that clear by adding a standard sysreg definition for the
register, and using it instead.
Reviewed-by: Mark Rutland <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Signed-off-by: Rob Herring (Arm) <[email protected]>
Tested-by: James Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Various PMUv3 registers which are a mask of counters are 64-bit
registers, but the accessor functions take a u32. This has been fine as
the upper 32-bits have been RES0 as there has been a maximum of 32
counters prior to Armv9.4/8.9. With Armv9.4/8.9, a 33rd counter is
added. Update the accessor functions to use a u64 instead.
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Rob Herring (Arm) <[email protected]>
Tested-by: James Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Xscale and Armv6 PMUs defined the cycle counter at 0 and event counters
starting at 1 and had 1:1 event index to counter numbering. On Armv7 and
later, this changed the cycle counter to 31 and event counters start at
0. The drivers for Armv7 and PMUv3 kept the old event index numbering
and introduced an event index to counter conversion. The conversion uses
masking to convert from event index to a counter number. This operation
relies on having at most 32 counters so that the cycle counter index 0
can be transformed to counter number 31.
Armv9.4 adds support for an additional fixed function counter
(instructions) which increases possible counters to more than 32, and
the conversion won't work anymore as a simple subtract and mask. The
primary reason for the translation (other than history) seems to be to
have a contiguous mask of counters 0-N. Keeping that would result in
more complicated index to counter conversions. Instead, store a mask of
available counters rather than just number of events. That provides more
information in addition to the number of events.
No (intended) functional changes.
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Rob Herring (Arm) <[email protected]>
Tested-by: James Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
After running once, the for_each_trip_desc() loop in
bang_bang_manage() is pure needless overhead because it is not going to
make any changes unless a new cooling device has been bound to one of
the trips in the thermal zone or the system is resuming from sleep.
For this reason, make bang_bang_manage() set governor_data for the
thermal zone and check it upfront to decide whether or not it needs to
do anything.
However, governor_data needs to be reset in some cases to let
bang_bang_manage() know that it should walk the trips again, so add an
.update_tz() callback to the governor and make the core additionally
invoke it during system resume.
To avoid affecting the other users of that callback unnecessarily, add
a special notification reason for system resume, THERMAL_TZ_RESUME, and
also pass it to __thermal_zone_device_update() called during system
resume for consistency.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Peter Kästle <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Cc: 6.10+ <[email protected]> # 6.10+
Link: https://patch.msgid.link/[email protected]
|
|
Almost two thirds of the memchr_inv() usages check if the memory area is
all zeros, with no interest in where in the buffer the first non-zero
byte is located. Checking for !memchr_inv(s, 0, n) is also not very
intuitive or discoverable. Add an explicit mem_is_zero() helper for this
use case.
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
I was revisiting the topic of 802.1ad treatment in the Ocelot switch [0]
and realized that not only is its basic VLAN classification pipeline
improper for offloading vlan_protocol 802.1ad bridges, but also improper
for offloading regular 802.1Q bridges already.
Namely, 802.1ad-tagged traffic should be treated as VLAN-untagged by
bridged ports, but this switch treats it as if it was 802.1Q-tagged with
the same VID as in the 802.1ad header. This is markedly different to
what the Linux bridge expects; see the "other_tpid()" function in
tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh.
An idea came to me that the VCAP IS1 TCAM is more powerful than I'm
giving it credit for, and that it actually overwrites the classified VID
before the VLAN Table lookup takes place. In other words, it can be
used even to save a packet from being dropped on ingress due to VLAN
membership.
Add a sophisticated TCAM rule hardcoded into the driver to force the
switch to behave like a Linux bridge with vlan_filtering 1 vlan_protocol
802.1Q.
Regarding the lifetime of the filter: eventually the bridge will
disappear, and vlan_filtering on the port will be restored to 0 for
standalone mode. Then the filter will be deleted.
[0]: https://lore.kernel.org/netdev/20201009122947.nvhye4hvcha3tljh@skbuf/
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|