| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In most cases when a VCM is used there is a single integrated module
with the sensor + VCM + lens. This means that the sensor and VCM often
share regulators and possibly also something like a powerdown pin.
In the ACPI tables this is modelled as a single ACPI device with
multiple I2cSerialBus resources.
On atomisp devices the regulators and clks are modelled as ACPI
power-resources, which are controlled by the (ACPI) power state
of the sensor. So the sensor must be in D0 power state for the VCM
to work.
To make this work add a device-link with DL_FLAG_PM_RUNTIME flag
so that the sensor will automatically be runtime-resumed whenever
the VCM is runtime-resumed.
This requires the probing of the VCM and thus the creation of the VCM
I2C-client to be delayed till after the sensor driver has bound.
Move the instantiation of the VCM I2C-client to the v4l2_async_notifier
bound op, so that it is done after the sensor driver has bound; and
add code to add the device-link.
This fixes the problem with the shared ACPI power-resources on atomisp2
and this avoids the need for VCM related workarounds on IPU3 / IPU6.
E.g. until now the dw9719 driver needed to get and control a Vsio
(V sensor IO) regulator since that needs to be enabled to enable I2C
pass-through on the PMIC on the sensor module. So the driver was
controlling this regulator even though the actual dw9719 chip has no
Vsio pin / power-plane.
This also removes the need for ipu_bridge_init() to return
-EPROBE_DEFER since the VCM is now instantiated later.
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Daniel Scally <[email protected]>
Tested-by: Daniel Scally <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Move ipu-bridge.h to include/media/, so that it can also be used by
the atomisp code.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The helpers in this header are not used anywhere anymore,
they have been superseded by the new CCI register access helpers.
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The CSI2 specification specifies a standard method to access camera sensor
registers called "Camera Control Interface (CCI)".
This uses either 8 or 16 bit (big-endian wire order) register addresses
and supports 8, 16, 24 or 32 bit (big-endian wire order) register widths.
Currently a lot of Linux camera sensor drivers all have their own custom
helpers for this, often copy and pasted from other drivers.
Add a set of generic helpers for this so that all sensor drivers can
switch to a single common implementation.
These helpers take an extra optional "int *err" function parameter,
this can be used to chain a bunch of register accesses together with
only a single error check at the end, rather than needing to error
check each individual register access. The first failing call will
set the contents of err to a non 0 value and all other calls will
then become no-ops.
Link: https://lore.kernel.org/linux-media/[email protected]/
Reviewed-by: Andy Shevchenko <[email protected]>
Tested-by: Tommaso Merciai <[email protected]>
Reviewed-by: Tommaso Merciai <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The routing parameter of v4l2_subdev_set_routing_with_fmt() is missing
'const'. Add it.
Signed-off-by: Tomi Valkeinen <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Define one uncompressed capture format V4L2_PIX_FMT_MT2110R in order to
support 10bit for H264 in mt8195.
Signed-off-by: Mingjia Zhang <[email protected]>
Co-developed-by: Yunfei Dong <[email protected]>
Signed-off-by: Yunfei Dong <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Define one uncompressed capture format V4L2_PIX_FMT_MT2110T in order to
support 10bit for AV1/VP9/HEVC in mt8195.
Signed-off-by: Mingjia Zhang <[email protected]>
Co-developed-by: Yunfei Dong <[email protected]>
Signed-off-by: Yunfei Dong <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The adap_configured() callback was called with the adap->lock mutex
held if the 'configured' argument was false, and without the adap->lock
mutex held if that argument was true.
That was very confusing, and so split this up in a adap_unconfigured()
callback and a high-level configured() callback.
This also makes it easier to understand when the mutex is held: all
low-level adap_* callbacks are called with the mutex held. All other
callbacks are called without that mutex held.
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: f1b57164305d ("media: cec: add optional adap_configured callback")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
A potential deadlock was found by Zheng Zhang with a local syzkaller
instance.
The problem is that when a non-blocking CEC transmit is canceled by calling
cec_data_cancel, that in turn can call the high-level received() driver
callback, which can call cec_transmit_msg() to transmit a new message.
The cec_data_cancel() function is called with the adap->lock mutex held,
and cec_transmit_msg() tries to take that same lock.
The root cause is that the received() callback can either be used to pass
on a received message (and then adap->lock is not held), or to report a
canceled transmit (and then adap->lock is held).
This is confusing, so create a new low-level adap_nb_transmit_canceled
callback that reports back that a non-blocking transmit was canceled.
And the received() callback is only called when a message is received,
as was the case before commit f9d0ecbf56f4 ("media: cec: correctly pass
on reply results") complicated matters.
Reported-by: Zheng Zhang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: f9d0ecbf56f4 ("media: cec: correctly pass on reply results")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Set the v4l2_device already in async notifier init, so struct device
related to it will be available before the notifier is registered. This
requires separating notifier initialisation into two functions, one that
takes v4l2_device as its argument, v4l2_async_nf_init and
v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the
notifier will use a single function, v4l2_async_nf_register.
This is done in order to make struct device available earlier, during
construction of the async connections, for sensible debug prints.
Signed-off-by: Sakari Ailus <[email protected]>
Tested-by: Philipp Zabel <[email protected]> # imx6qp
Tested-by: Niklas Söderlund <[email protected]> # rcar + adv746x
Tested-by: Aishwarya Kothari <[email protected]> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <[email protected]> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
strp_done is only called when psock->progs.stream_parser is not NULL,
but stream_parser was set to NULL by sk_psock_stop_strp(), called
by sk_psock_drop() earlier. So, strp_done can never be called.
Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock.
Change the condition for calling strp_done from judging whether
stream_parser is set to judging whether this flag is set. This flag is
only set once when strp_init() succeeds, and will never be cleared later.
Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap")
Signed-off-by: Xu Kuohai <[email protected]>
Reviewed-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
There are several cases where virtual net devices may benefit from
having a PTP clock, and these have to do with testing. I can see at
least netdevsim and veth as potential users of a common mock-up PTP
hardware clock driver.
The proposed idea is to create an object which emulates PTP clock
operations on top of the unadjustable CLOCK_MONOTONIC_RAW plus a
software-controlled time domain via a timecounter/cyclecounter and then
link that PHC to the netdevsim device.
The driver is fully functional for its intended purpose, and it
successfully passes the PTP selftests.
$ cd tools/testing/selftests/ptp/
$ ./phc.sh /dev/ptp2
TEST: settime [ OK ]
TEST: adjtime [ OK ]
TEST: adjfreq [ OK ]
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.
For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label:
Depends on the firmware capability, if firmware doesn't support
sensors naming, the fallback naming convention would be: "sensorX",
where X is the HW spec (MTMP register) sensor index.
4) Temperature critical max value:
refers to the high threshold of Warning Event. Will be exposed as
`tempY_crit` hwmon attribute (RO attribute). For example for
ConnectX5 HCA's this temperature value will be 105 Celsius, 10
degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.
For example, for dualport ConnectX5 NIC with a single IC thermal diode
sensor will have 2 hwmon directories (one for each PCI function)
under "/sys/class/hwmon/hwmon[X,Y]".
Listing one of the directories above (hwmonX/Y) generates the
corresponding output below:
$ grep -H -d skip . /sys/class/hwmon/hwmon0/*
Output
=======================================================================
/sys/class/hwmon/hwmon0/name:mlx5
/sys/class/hwmon/hwmon0/temp1_crit:105000
/sys/class/hwmon/hwmon0/temp1_highest:48000
/sys/class/hwmon/hwmon0/temp1_input:46000
/sys/class/hwmon/hwmon0/temp1_label:asic
grep: /sys/class/hwmon/hwmon0/temp1_reset_history: Permission denied
In addition, displaying the sensors data via lm_sensors generates the
corresponding output below:
$ sensors
Output
=======================================================================
mlx5-pci-0800
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
mlx5-pci-0801
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
CC: Jean Delvare <[email protected]>
Signed-off-by: Adham Faris <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
IPV6_ADDRFORM socket option is evil, because it can change sock->ops
while other threads might read it. Same issue for sk->sk_family
being set to AF_INET.
Adding READ_ONCE() over sock->ops reads is needed for sockets
that might be impacted by IPV6_ADDRFORM.
Note that mptcp_is_tcpsk() can also overwrite sock->ops.
Adding annotations for all sk->sk_family reads will require
more patches :/
BUG: KCSAN: data-race in ____sys_sendmsg / do_ipv6_setsockopt
write to 0xffff888109f24ca0 of 8 bytes by task 4470 on cpu 0:
do_ipv6_setsockopt+0x2c5e/0x2ce0 net/ipv6/ipv6_sockglue.c:491
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
udpv6_setsockopt+0x95/0xa0 net/ipv6/udp.c:1690
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3663
__sys_setsockopt+0x1c3/0x230 net/socket.c:2273
__do_sys_setsockopt net/socket.c:2284 [inline]
__se_sys_setsockopt net/socket.c:2281 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2281
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888109f24ca0 of 8 bytes by task 4469 on cpu 1:
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x349/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmmsg+0x263/0x500 net/socket.c:2643
__do_sys_sendmmsg net/socket.c:2672 [inline]
__se_sys_sendmmsg net/socket.c:2669 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffffffff850e32b8 -> 0xffffffff850da890
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4469 Comm: syz-executor.1 Not tainted 6.4.0-rc5-syzkaller-00313-g4c605260bc60 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few small updates:
* fix an integer overflow in nl80211
* fix rtw89 8852AE disconnections
* fix a buffer overflow in ath12k
* fix AP_VLAN configuration lookups
* fix allocation failure handling in brcm80211
* update MAINTAINERS for some drivers
* tag 'wireless-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath12k: Fix buffer overflow when scanning with extraie
wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
wifi: cfg80211: fix sband iftype data lookup for AP_VLAN
wifi: rtw89: fix 8852AE disconnection caused by RX full flags
MAINTAINERS: Remove tree entry for rtl8180
MAINTAINERS: Update entry for rtl8187
wifi: brcm80211: handle params_v1 allocation failure
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Normally these two flags do go together, as the issuer of polled IO
generally cannot wait for resources that will get freed as part of IO
completion. This is because that very task is the one that will complete
the request and free those resources, hence that would introduce a
deadlock.
But it is possible to have someone else issue the polled IO, eg via
io_uring if the request is punted to io-wq. For that case, it's fine to
have the task block on IO submission, as it is not the same task that
will be completing the IO.
It's completely up to the caller to ask for both polled and nowait IO
separately! If we don't allow polled IO where IOCB_NOWAIT isn't set in
the kiocb, then we can run into repeated -EAGAIN submissions and not
make any progress.
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
First 4 Patches, from Yue Haibing, remove unused prototypes in
various netfilter headers.
Last patch makes nfnetlink_log to always include a packet timestamp,
up to now it was only included if the skb had assigned previously.
From Maciej Żenczykowski.
* tag 'nf-next-2023-08-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nfnetlink_log: always add a timestamp
netfilter: h323: Remove unused function declarations
netfilter: conntrack: Remove unused function declarations
netfilter: helper: Remove unused function declarations
netfilter: gre: Remove unused function declaration nf_ct_gre_keymap_flush()
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Before this code is copied, add the missing family, as we did in
commit 3dd344ea84e1 ("net: tracepoint: exposing sk_family in all tcp:tracepoints")
Fixes: 15fcdf6ae116 ("tcp: Add tracepoint for tcp_set_ca_state")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Ping Gan <[email protected]>
Cc: Manjusaka <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices")
removed the implementation but leave declaration.
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 1e2dc14509fd ("net: ethtool: Add helpers for reporting test results")
declared but never implemented these function.
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Advertise support of Gen5 devices in the driver's device ID table and
add the same IDs for the switchtec quirks. Also update driver code to
accommodate them.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kelvin Cao <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
|
|
Enable io_uring commands on network sockets. Create two new
SOCKET_URING_OP commands that will operate on sockets.
In order to call ioctl on sockets, use the file_operations->io_uring_cmd
callbacks, and map it to a uring socket function, which handles the
SOCKET_URING_OP accordingly, and calls socket ioctls.
This patches was tested by creating a new test case in liburing.
Link: https://github.com/leitao/liburing/tree/io_uring_cmd
Signed-off-by: Breno Leitao <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Since commit 2e4552893038 ("iommu/vt-d: Unify the way to process DMAR
device scope array") this is not used anymore, so can remove it.
Signed-off-by: YueHaibing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The IOMMU_RESV_DIRECT flag indicates that a memory region must be mapped
1:1 at all times. This means that the region must always be accessible to
the device, even if the device is attached to a blocking domain. This is
equal to saying that IOMMU_RESV_DIRECT flag prevents devices from being
attached to blocking domains.
This also implies that devices that implement RESV_DIRECT regions will be
prevented from being assigned to user space since taking the DMA ownership
immediately switches to a blocking domain.
The rule of preventing devices with the IOMMU_RESV_DIRECT regions from
being assigned to user space has existed in the Intel IOMMU driver for
a long time. Now, this rule is being lifted up to a general core rule,
as other architectures like AMD and ARM also have RMRR-like reserved
regions. This has been discussed in the community mailing list and refer
to below link for more details.
Other places using unmanaged domains for kernel DMA must follow the
iommu_get_resv_regions() and setup IOMMU_RESV_DIRECT - we do not restrict
them in the core code.
Cc: Robin Murphy <[email protected]>
Cc: Alex Williamson <[email protected]>
Cc: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/linux-iommu/BN9PR11MB5276E84229B5BD952D78E9598C639@BN9PR11MB5276.namprd11.prod.outlook.com
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Acked-by: Joerg Roedel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Intel ENQCMD requires a single PASID to be shared between multiple
devices, as the PASID is stored in a single MSR register per-process
and userspace can use only that one PASID.
This means that the PASID allocation for any ENQCMD using device driver
must always come from a shared global pool, regardless of what kind of
domain the PASID will be used with.
Split the code for the global PASID allocator into
iommu_alloc/free_global_pasid() so that drivers can attach non-SVA
domains to PASIDs as well.
This patch moves global PASID allocation APIs from SVA to IOMMU APIs.
Reserved PASIDs, currently only RID_PASID, are excluded from the global
PASID allocation.
It is expected that device drivers will use the allocated PASIDs to
attach to appropriate IOMMU domains for use.
Reviewed-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Jacob Pan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
PCIe Process address space ID (PASID) is used to tag DMA traffic, it
provides finer grained isolation than requester ID (RID).
For each device/RID, 0 is a special PASID for the normal DMA (no
PASID). This is universal across all architectures that supports PASID,
therefore warranted to be reserved globally and declared in the common
header. Consequently, we can avoid the conflict between different PASID
use cases in the generic code. e.g. SVA and DMA API with PASIDs.
This paved away for device drivers to choose global PASID policy while
continue doing normal DMA.
Noting that VT-d could support none-zero RID/NO_PASID, but currently not
used.
Reviewed-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Jean-Philippe Brucker <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Jacob Pan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Wireless USB has long been defunct, and kernel support for it was
removed in 2020 by commit caa6772db4c1 ("Staging: remove wusbcore and
UWB from the kernel tree.").
Nevertheless, some vestiges of the old implementation still clutter up
the USB subsystem and one or two other places. Let's get rid of them
once and for all.
The only parts still left are the user-facing APIs in
include/uapi/linux/usb/ch9.h. (There are also a couple of misleading
instances, such as the Sierra Wireless USB modem, which is a USB modem
made by Sierra Wireless.)
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Some NXP processors using ChipIdea USB IP have a bug when frame babble is
detected.
Issue description:
In USB camera test, our controller is host in HS mode. In ISOC IN, when
device sends data across the micro frame, it causes the babble in host
controller. This will clear the PE bit. In spec, it also requires to set
the PEC bit and then set the PCI bit. Without the PCI interrupt, the
software does not know the PE is cleared.
This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted
platform datas. And the ehci host driver will assert PEC by SW when
specific conditions are satisfied.
Signed-off-by: Xu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add new dma range and change naming convention for virtual address
memory ranges managed by KMD.
New available ranges are named as follows:
* global range - global context accessible by FW
* aliased range - user context accessible by FW
* dma range - user context accessible by DMA
* shave range - user context accessible by shaves
* global shave range - global context accessible by shave nn
Signed-off-by: Karol Wachowski <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Stanislaw Gruszka <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add DRM_IVPU_PARAM_CAPABILITIES parameters to get_param ioctl to query
driver capabilities. For now use it for identify metric streamer and
new dma memory range features. Currently upstream version of intel_vpu
does not have those, they will be added it the future.
Reviewed-by: Jacek Lawrynowicz <[email protected]>
Signed-off-by: Stanislaw Gruszka <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In preparation for assigning some inode space to extended attributes,
keep track of free_ispace instead of number of free_inodes: as if one
tmpfs inode (and accompanying dentry) occupies very approximately 1KiB.
Unsigned long is large enough for free_ispace, on 64-bit and on 32-bit:
but take care to enforce the maximum. And fix the nr_blocks maximum on
32-bit: S64_MAX would be too big for it there, so say LONG_MAX instead.
Delete the incorrect limited<->unlimited blocks/inodes comment above
shmem_reconfigure(): leave it to the error messages below to describe.
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Carlos Maiolino <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
tmpfs wants to support limited user extended attributes, but kernfs
(or cgroupfs, the only kernfs with KERNFS_ROOT_SUPPORT_USER_XATTR)
already supports user extended attributes through simple xattrs: but
limited by a policy (128KiB per inode) too liberal to be used on tmpfs.
To allow a different limiting policy for tmpfs, without affecting the
policy for kernfs, change simple_xattr_set() to return the replaced or
removed xattr (if any), leaving the caller to update their accounting
then free the xattr (by simple_xattr_free(), renamed from the static
free_simple_xattr()).
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Reviewed-by: Carlos Maiolino <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
The current cursor-based directory offset mechanism doesn't work
when a tmpfs filesystem is exported via NFS. This is because NFS
clients do not open directories. Each server-side READDIR operation
has to open the directory, read it, then close it. The cursor state
for that directory, being associated strictly with the opened
struct file, is thus discarded after each NFS READDIR operation.
Directory offsets are cached not only by NFS clients, but also by
user space libraries on those clients. Essentially there is no way
to invalidate those caches when directory offsets have changed on
an NFS server after the offset-to-dentry mapping changes. Thus the
whole application stack depends on unchanging directory offsets.
The solution we've come up with is to make the directory offset for
each file in a tmpfs filesystem stable for the life of the directory
entry it represents.
shmem_readdir() and shmem_dir_llseek() now use an xarray to map each
directory offset (an loff_t integer) to the memory address of a
struct dentry.
Signed-off-by: Chuck Lever <[email protected]>
Message-Id: <168814734331.530310.3911190551060453102.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Create a vector of directory operations in fs/libfs.c that handles
directory seeks and readdir via stable offsets instead of the
current cursor-based mechanism.
For the moment these are unused.
Signed-off-by: Chuck Lever <[email protected]>
Message-Id: <168814732984.530310.11190772066786107220.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Allow system administrator to set default global quota limits at tmpfs
mount time.
Signed-off-by: Lukas Czerner <[email protected]>
Signed-off-by: Carlos Maiolino <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Now the basic infra-structure is in place, enable quota support for tmpfs.
This offers user and group quotas to tmpfs (project quotas will be added
later). Also, as other filesystems, the tmpfs quota is not supported
within user namespaces yet, so idmapping is not translated.
Signed-off-by: Lukas Czerner <[email protected]>
Signed-off-by: Carlos Maiolino <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Add new shmem quota format, its quota_format_ops together with
dquot_operations
Signed-off-by: Lukas Czerner <[email protected]>
Signed-off-by: Carlos Maiolino <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
In future patches we're going to change how the ctime is updated
to keep track of when it has been queried. The way that the update_time
operation works (and a lot of its callers) make this difficult, since
they grab a timestamp early and then pass it down to eventually be
copied into the inode.
All of the existing update_time callers pass in the result of
current_time() in some fashion. Drop the "time" parameter from
generic_update_time, and rework it to fetch its own timestamp.
This change means that an update_time could fetch a different timestamp
than was seen in inode_needs_update_time. update_time is only ever
called with one of two flag combinations: Either S_ATIME is set, or
S_MTIME|S_CTIME|S_VERSION are set.
With this change we now treat the flags argument as an indicator that
some value needed to be updated when last checked, rather than an
indication to update specific timestamps.
Rework the logic for updating the timestamps and put it in a new
inode_update_timestamps helper that other update_time routines can use.
S_ATIME is as treated as we always have, but if any of the other three
are set, then we attempt to update all three.
Also, some callers of generic_update_time need to know what timestamps
were actually updated. Change it to return an S_* flag mask to indicate
that and rework the callers to expect it.
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.
Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.
Acked-by: Joseph Qi <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Reviewed-by: "Paulo Alcantara (SUSE)" <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
bdev->bd_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Add more trace events for the scanning and unregistration
functions for debug purposes.
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joel Stanley <[email protected]>
|
|
A new use case for the SBEFIFO requires a long in-command timeout
as the SBE processes each part of the command before clearing the
upstream FIFO for the next part of the command.
Signed-off-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joel Stanley <[email protected]>
|
|
Commit db559117828d ("bpf: Consolidate spin_lock, timer management into btf_record")
removed the implementations but leave declarations.
Signed-off-by: Yue Haibing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-07
1) Few cleanups
2) Dynamic completion EQs
The driver creates completion EQs for all vectors directly on driver
load, even if those EQs will not be utilized later on.
To allow more flexibility in managing completion EQs and to reduce the
memory overhead of driver load, this series will adjust completion EQs
creation to be dynamic. Meaning, completion EQs will be created only
when needed.
Patch #1 introduces a counter for tracking the current number of
completion EQs.
Patches #2-6 refactor the existing infrastructure of managing completion
EQs and completion IRQs to be compatible with per-vector
allocation/release requests.
Patches #7-8 modify the CPU-to-IRQ affinity calculation to be resilient
in case the affinity is requested but completion IRQ is not allocated yet.
Patch #9 function rename.
Patch #10 handles the corner case of SF performing an IRQ request when no
SF IRQ pool is found, and no PF IRQ exists for the same vector.
Patch #11 modify driver to use dynamically allocate completion EQs.
* tag 'mlx5-updates-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Bridge, Only handle registered netdev bridge events
net/mlx5: E-Switch, Remove redundant arg ignore_flow_lvl
net/mlx5: Fix typo reminder -> remainder
net/mlx5: remove many unnecessary NULL values
net/mlx5: Allocate completion EQs dynamically
net/mlx5: Handle SF IRQ request in the absence of SF IRQ pool
net/mlx5: Rename mlx5_comp_vectors_count() to mlx5_comp_vectors_max()
net/mlx5: Add IRQ vector to CPU lookup function
net/mlx5: Introduce mlx5_cpumask_default_spread
net/mlx5: Implement single completion EQ create/destroy methods
net/mlx5: Use xarray to store and manage completion EQs
net/mlx5: Refactor completion IRQ request/release handlers in EQ layer
net/mlx5: Use xarray to store and manage completion IRQs
net/mlx5: Refactor completion IRQ request/release API
net/mlx5: Track the current number of completion EQs
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In commit 82e896d992fa ("docs: net: page_pool: use kdoc to avoid
duplicating the information") I shied away from using the DOC:
comments when moving to kdoc for documenting page_pool API,
because I wasn't sure how familiar people are with it.
Turns out there is already a DOC: comment for the intro, which
is the same in both places, modulo what looks like minor rewording.
Use the version from Documentation/ but keep the contents with
the code.
Acked-by: Jesper Dangaard Brouer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit f655dacb59ac ("net: devlink: remove unused locked functions")
removed this but leave the declaration.
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commitbf9009bf21b5 ("net/fq_impl: drop get_default_func, move default flow to fq_tin")
remove its last user, so can remove it.
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Because the getter function in the team_option structure always returns 0,
so change the getter function to void and remove redundant code.
Signed-off-by: Zhengchao Shao <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Because the init function in the team_option structure always returns 0,
so change the init function to void and remove redundant code.
Signed-off-by: Zhengchao Shao <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
linux/fs_enet_pd.h is not used anymore.
Remove it.
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/5be102791c987792ad127b15543ee6715394cf67.1691155347.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <[email protected]>
|