aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2023-08-14dt-bindings: clock: fsl,imx8-acm: Add audio clock mux supportShengjiu Wang1-0/+28
Add the clock dt-binding file for Audio Clock Mux. which is the IP for i.MX8QM, i.MX8QXP, i.MX8DXL. Add the clockid for clocks in header file. The Audio Clock Mux is binded with all the audio IP and audio clocks in the subsystem, so need to list the power domain of related clocks and IPs. Each clock and IP has a power domain, so there are so many power domains. Signed-off-by: Shengjiu Wang <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abel Vesa <[email protected]>
2023-08-14HID: roccat: make all 'class' structures constIvan Orlov1-1/+1
Now that the driver core allows for struct class to be in read-only memory, making all 'class' structures to be declared at build time placing them into read-only memory, instead of having to be dynamically allocated at load time. Cc: Stefan Achatz <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Cc: [email protected] Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Ivan Orlov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-08-14HID: Reorder fields in 'struct hid_input'Christophe JAILLET1-1/+1
Group some variables based on their sizes to reduce hole and avoid padding. On x86_64, this shrinks the size of 'struct hid_input' from 72 to 64 bytes. It saves a few bytes of memory and is more cache-line friendly. Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-08-14HID: input: Support devices sending Eraser without InvertIllia Ostapyshyn1-0/+1
Some digitizers (notably XP-Pen Artist 24) do not report the Invert usage when erasing. This causes the device to be permanently stuck with the BTN_TOOL_RUBBER tool after sending Eraser, as Invert is the only usage that can release the tool. In this state, Touch and Inrange are no longer reported to userspace, rendering the pen unusable. Prior to commit 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT"), BTN_TOOL_RUBBER was never set and Eraser events were simply translated into BTN_TOUCH without causing an inconsistent state. Introduce HID_QUIRK_NOINVERT for such digitizers and detect them during hidinput_configure_usage(). This quirk causes the tool to be released as soon as Eraser is reported as not set. Set BTN_TOOL_RUBBER in input->keybit when mapping Eraser. Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT") Co-developed-by: Nils Fuhler <[email protected]> Signed-off-by: Nils Fuhler <[email protected]> Signed-off-by: Illia Ostapyshyn <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-08-14net: phy: Introduce PSGMII PHY interface modeGabor Juhos1-0/+4
The PSGMII interface is similar to QSGMII. The main difference is that the PSGMII interface combines five SGMII lines into a single link while in QSGMII only four lines are combined. Similarly to the QSGMII, this interface mode might also needs special handling within the MAC driver. It is commonly used by Qualcomm with their QCA807x PHY series and modern WiSoC-s. Add definitions for the PHY layer to allow to express this type of connection between the MAC and PHY. Signed-off-by: Gabor Juhos <[email protected]> Signed-off-by: Robert Marko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-14net: openvswitch: add explicit drop actionEric Garver1-0/+2
From: Eric Garver <[email protected]> This adds an explicit drop action. This is used by OVS to drop packets for which it cannot determine what to do. An explicit action in the kernel allows passing the reason _why_ the packet is being dropped or zero to indicate no particular error happened (i.e: OVS intentionally dropped the packet). Since the error codes coming from userspace mean nothing for the kernel, we squash all of them into only two drop reasons: - OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed - OVS_DROP_EXPLICIT to indicate a zero value was passed (no error) e.g. trace all OVS dropped skbs # perf trace -e skb:kfree_skb --filter="reason >= 0x30000" [..] 106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \ location:0xffffffffc0d9b462, protocol: 2048, reason: 196611) reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT) Also, this patch allows ovs-dpctl.py to add explicit drop actions as: "drop" -> implicit empty-action drop "drop(0)" -> explicit non-error action drop "drop(42)" -> explicit error action drop Signed-off-by: Eric Garver <[email protected]> Co-developed-by: Adrian Moreno <[email protected]> Signed-off-by: Adrian Moreno <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-14net: openvswitch: add last-action drop reasonAdrian Moreno1-0/+6
Create a new drop reason subsystem for openvswitch and add the first drop reason to represent last-action drops. Last-action drops happen when a flow has an empty action list or there is no action that consumes the packet (output, userspace, recirc, etc). It is the most common way in which OVS drops packets. Implementation-wise, most of these skb-consuming actions already call "consume_skb" internally and return directly from within the do_execute_actions() loop so with minimal changes we can assume that any skb that exits the loop normally is a packet drop. Signed-off-by: Adrian Moreno <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-14net: factor out __inet_listen_sk() helperPaolo Abeni1-0/+1
The mptcp protocol maintains an additional socket just to easily invoke a few stream operations on the first subflow. One of them is inet_listen(). Factor out an helper operating directly on the (locked) struct sock, to allow get rid of the above dependency in the next patch without duplicating the existing code. No functional changes intended. Signed-off-by: Paolo Abeni <[email protected]> Acked-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-14net: factor out inet{,6}_bind_sk helpersPaolo Abeni2-0/+2
The mptcp protocol maintains an additional socket just to easily invoke a few stream operations on the first subflow. One of them is bind(). Factor out the helpers operating directly on the struct sock, to allow get rid of the above dependency in the next patch without duplicating the existing code. No functional changes intended. Signed-off-by: Paolo Abeni <[email protected]> Acked-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-13dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRCOtto Pflüger1-0/+1
Add the missing #define for GPLL0_SLEEP_CLK_SRC, the parent clock of GPLL0_EARLY. Signed-off-by: Otto Pflüger <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-08-13dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCsImran Shaik1-1/+3
Add support for GCC_GPLL1_OUT_EVEN and GCC_DDRSS_ECPRI_GSI_CLK clock bindings for QDU1000 and QRU1000 SoCs. While at it, update the maintainers list. Signed-off-by: Imran Shaik <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-08-13Merge branch '[email protected]' into ↵Bjorn Andersson1-0/+3
arm64-for-6.6 Merge additional MSM8998 GCC DeviceTree binding constants for use in the MSM8998 DeviceTree source.
2023-08-13Merge branch '[email protected]' into ↵Bjorn Andersson1-0/+3
clk-for-6.6 Merge additional MSM8998 GCC DeviceTree binding constants through a topic branch to make them available to the DeviceTree source tree as well.
2023-08-13dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legsKonrad Dybcio1-0/+3
GPLL0 has two separate outputs to both GPUSS and MMSS: one that's 2-divided and one that runs at the same rate as the GPLL0 itself. Add the missing ones to the binding. Acked-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Jeffrey Hugo <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-08-13soc: qcom: aoss: Format string in qmp_send()Bjorn Andersson1-2/+2
The majority of callers to qmp_send() composes the message dynamically using some form of sprintf(), resulting in unnecessary complication and stack usage. By changing the interface of qmp_send() to take a format string and arguments, the duplicated composition of the commands can be moved to a single location. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-08-13soc: qcom: aoss: Move length requirements from callerBjorn Andersson1-2/+2
The existing implementation of qmp_send() requires the caller to provide a buffer which is of word-aligned. The underlying reason for this is that message ram only supports word accesses, but pushing this requirement onto the clients results in the same boiler plate code sprinkled in every call site. By using a temporary buffer in qmp_send() we can hide the underlying hardware limitations from the clients and allow them to pass their NUL-terminates C string directly. Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-08-13Merge 6.5-rc6 into char-misc-nextGreg Kroah-Hartman25-105/+150
We need the char/misc fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-13kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECTKemeng Shi1-3/+3
We mix up KUNIT_TRIGGER_STATIC_STUB and KUNIT_STATIC_STUB_REDIRECT in static_stub header. Just correct KUNIT_TRIGGER_STATIC_STUB to KUNIT_STATIC_STUB_REDIRECT which is documented. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: David Gow <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-08-13net: Remove leftover include from nftables.hJörn-Thorben Hinz1-2/+0
Commit db3685b4046f ("net: remove obsolete members from struct net") removed the uses of struct list_head from this header, without removing the corresponding included header. Signed-off-by: Jörn-Thorben Hinz <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-13Merge tag 'for-net-next-2023-08-11' of ↵David S. Miller6-16/+114
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next bluetooth-next pull request for net-next: - Add new VID/PID for Mediatek MT7922 - Add support multiple BIS/BIG - Add support for Intel Gale Peak - Add support for Qualcomm WCN3988 - Add support for BT_PKT_STATUS for ISO sockets - Various fixes for experimental ISO support - Load FW v2 for RTL8852C - Add support for NXP AW693 chipset - Add support for Mediatek MT2925
2023-08-13net: tcp: send zero-window ACK when no memoryMenglong Dong1-1/+2
For now, skb will be dropped when no memory, which makes client keep retrans util timeout and it's not friendly to the users. In this patch, we reply an ACK with zero-window in this case to update the snd_wnd of the sender to 0. Therefore, the sender won't timeout the connection and will probe the zero-window with the retransmits. Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-13RDMA Remove unused function declarationsYue Haibing2-23/+0
Commit c2261dd76b54 ("RDMA/device: Add ib_device_set_netdev() as an alternative to get_netdev") declared but never implemented ib_device_netdev(), remove it. Commit 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.") declared but never implemented iw_cm_unbind_qp() and iw_cm_get_qp(). Signed-off-by: Yue Haibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]>
2023-08-12locking: remove spin_lock_prefetchMateusz Guzik1-6/+1
The only remaining consumer is new_inode, where it showed up in 2001 as commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1] with a changelog which does not mention it. Since then the line got only touched up to keep compiling. While it may have been of benefit back in the day, it is guaranteed to at best not get in the way in the multicore setting -- as the code performs *a lot* of work between the prefetch and actual lock acquire, any contention means the cacheline is already invalid by the time the routine calls spin_lock(). It adds spurious traffic, for short. On top of it prefetch is notoriously tricky to use for single-threaded purposes, making it questionable from the get go. As such, remove it. I admit upfront I did not see value in benchmarking this change, but I can do it if that is deemed appropriate. Removal from new_inode and of the entire thing are in the same patch as requested by Linus, so whatever weird looks can be directed at that guy. Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1] Signed-off-by: Mateusz Guzik <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2023-08-12Merge tag 'x86_bugs_for_v6.5_rc6' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mitigation fixes from Borislav Petkov: "The first set of fallout fixes after the embargo madness. There will be another set next week too. - A first series of cleanups/unifications and documentation improvements to the SRSO and GDS mitigations code which got postponed to after the embargo date - Fix the SRSO aliasing addresses assertion so that the LLVM linker can parse it too" * tag 'x86_bugs_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: driver core: cpu: Fix the fallback cpu_show_gds() name x86: Move gds_ucode_mitigated() declaration to header x86/speculation: Add cpu_show_gds() prototype driver core: cpu: Make cpu_show_not_affected() static x86/srso: Fix build breakage with the LLVM linker Documentation/srso: Document IBPB aspect and fix formatting driver core: cpu: Unify redundant silly stubs Documentation/hw-vuln: Unify filename specification in index
2023-08-12Merge tag 'amlogic-drivers-for-v6.6' of ↵Arnd Bergmann1-0/+25
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers Amlogic drivers changes for v6.6: - Add C3 Power Domains - Explicitly include correct DT includes in Amlogic SoC drivers - fix to avoid potential NULL pointer dereference in meson_sm - Merge of genpd-v6.5-rc1-1 to move genpd amlogic drivers * tag 'amlogic-drivers-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: firmware: meson_sm: fix to avoid potential NULL pointer dereference soc: amlogic: Explicitly include correct DT includes soc: c3: Add support for power domains controller dt-bindings: power: add Amlogic C3 power domains soc: amlogic: use name instead of index as criterion Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-08-12Merge tag 'at91-soc-6.6' of ↵Arnd Bergmann1-3/+0
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm AT91 SoC updates for 6.6: It contains: - explicitly include correct DT includes from Rob - one cleanup which removes unused extern declaration on atmel_tcb.h * tag 'at91-soc-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: Remove unused extern declarations ARM: at91: Explicitly include correct DT includes soc: microchip: Explicitly include correct DT includes Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-08-11bpf: Remove unused declaration bpf_link_new_file()Yue Haibing1-1/+0
Commit a3b80e107894 ("bpf: Allocate ID for bpf_link") removed the implementation but not the declaration. Signed-off-by: Yue Haibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-11dt-bindings: firmware: qcom: scm: Updating VMID listGokul krishna Krishnakumar1-0/+21
Adding the full list of VMID's, which are used by different clients to pass to the secure world. Signed-off-by: Gokul krishna Krishnakumar <[email protected]> Acked-by: Rob Herring <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-08-11Merge tag 'mhi-for-v6.6' of ↵Greg Kroah-Hartman1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Manivannan writes: MHI Host ======== Core ---- - Skipped MHI reset if the device is in RDDM EE (Ramdump mode) since the device cannot process reset request. - Updated the sysfs contact details to use MHI list instead of bouncing codeaurora email ids. - Added support to allow MHI client drivers to provide the device firmware via a pointer. This is required to support new firmware format to be used by ath11k drivers. - Used vcalloc instead of vzalloc to protect against multiplication overflows. - Removed decrementing one unused parameter. pci_generic ----------- - Added support for MHI SW channels (IP_SW0) so that the host can transfer data from devices over networking interface through this specific channel. - Added support for a clone of Quectel RM520N-GL modem which uses a different PID as it is targeted for laptop usecase. - Added support for a clone of Quectel EM160R-GL modem which uses a different PID as it is targeted for laptop usecase. - Added support for another clone of Quectel RM520N-GL modem which uses a different PID as it is targeted for Lenovo laptop usecase. - Added support for Dell DW5932e modem (both eSIM and non-eSIM variants). - Added support for Telit FE990 modem. * tag 'mhi-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: pci_generic: add support for Telit FE990 modem bus: mhi: host: remove unused-but-set parameter bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL Lenovo variant bus: mhi: host: allow MHI client drivers to provide the firmware via a pointer docs: ABI: sysfs-bus-mhi: Update contact info bus: mhi: host: use vmalloc_array and vcalloc bus: mhi: host: pci_generic: Add support for Dell DW5932e bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem bus: mhi: host: pci_generic: Add support for Quectel EM160R-GL modem bus: mhi: host: pci_generic: Add support for IP_SW0 channels bus: mhi: host: Skip MHI reset if device is in RDDM
2023-08-11Merge tag 'fsi-for-v6.6' of ↵Greg Kroah-Hartman3-0/+148
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joen writes: FSI changes for v6.6 * New drivers for the I2C Responder master and SCOM device * Misc janitor fixes * tag 'fsi-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi: fix some spelling mistakes in comment fsi: master-ast-cf: Add MODULE_FIRMWARE macro docs: ABI: fix spelling/grammar in SBEFIFO timeout interface fsi: Add I2C Responder SCOM driver fsi: Add IBM I2C Responder virtual FSI master dt-bindings: fsi: Document the IBM I2C Responder virtual FSI master fsi: Lock mutex for master device registration fsi: Improve master indexing fsi: core: Switch to ida_alloc/free fsi: core: Fix legacy minor numbering fsi: core: Add trace events for scan and unregister fsi: aspeed: Reset master errors after CFAM reset fsi: sbefifo: Remove limits on user-specified read timeout fsi: sbefifo: Add configurable in-command timeout fsi: sbefifo: Don't check status during probe fsi: Use of_match_table for bus matching if specified fsi: Add aliased device numbering fsi: Move fsi_slave structure definition to header fsi: Use of_property_read_reg() to parse "reg" fsi: Explicitly include correct DT includes
2023-08-11Merge tag 'iio-for-6.6a' of ↵Greg Kroah-Hartman7-148/+255
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for 6.6 New device support * adi,ad8366 - Add support for the HMC792 digital attenuator (mostly chip specific data) * alwinner,sun20i-gpadc - New driver for the integrated ADC on a number of allwinner SoCs including dt-binding documentation. * microchip,mcp4728 - New driver for this quad channel DAC. Includes dt-bindings. * miramems, da280 - Add ID for DA217 accelerometer which is compatible with the da280. * murata,irs-d200 - New driver for this passive infrared sensor typically used for human detection. Includes bindings and a few pieces of new ABI to cover a case of needing to count a number of repeats of an event before reporting it. * rohm,bu27008 - Add initial support for the BU27010 RGB + flickering sensor to this driver. Substantial refactoring was needed to enable this. Features * adi,admv8818 - Add mode that bypasses the input and output filters. * amlogic,meson - Support control of the MUX on channel 7, exposed as multiple channels. - Support channel labels. * sensirion,scd4x - Add pressure compensation. Controlled via an 'output' pressure channel. * ti,lmp92040 - Add IIO buffered supported (read via chrdev). * vishay,vcnl4000 - Add proximity interrupt support for vcnl4200. - Add proximity integration time control for vcnl4200. - Add illuminance integration time control for vcnl4040 and vcnl4200. - Add calibration bias, proximity and illuminance event period, and oversampling ratio control for vcnl4040 and vncl4200. Cleanup and minor fixes * core - Tidy up handling of set_trigger_state() callback return values to consistently assume no positive return values. - Use min() rather than min_t() in a case where types were clearly the same. - Drop some else statements that follow continue with a loop or a returns. - White space and comment format cleanup. - Use sysfs_match_string() helper to improve readability. - Use krealloc_array() to make it explicit a krealloc is for an array of structures, not just one. * tools - Tidy up potential overflow in array index. * tree wide - Fix up includes for DT related headers. - Drop some error prints in places where as similar error message is printed by the function being called. - Tidy up handling of return value from platform_get_irq() to no longer take into account 0 as a value that might be returned. Similar for fwnode_irq_get(). * adi,ad7192 - Add missing error check and improved debug logging. - Use sysfs_emit_at() rather than open coded variant. * adi,adis16475 - Drop unused scan element enum entries. - Specify that a few more devices support burst32 mode. * adi,admv1013 - Enable all required regulators and document as required in the dt-binding. * adi,admv1014 - Make all regulators required in the dt-binding as the device needs them all enabled. * adi,adxl313 - Fix wrong enum values being used in the i2c_device_id table. - Use i2c_get_match_data() to reduce open coded handling of the various id tables. * allwinner,gpadc - Make the kconfig text more specific to make space for separate drivers for other Allwinner devices. * amlogic,meson - Drop unused timestamp channels as no buffer support. - Various minor reorganizations to enable addition of support channel 7 MUX. - Initialize some default values to account for potential previous user since reboot. * qcom,spmi-adc5 - Add ADC5_GPIO2_100K_PU support to driver to line up with bindings. * qcom,spmi-adc7 - Use predefined channel ID definitions rather than values. * invensense, common - Factor out the timestamp handling to a module used by both mpu6050 and icm42600. * invensense,mpu6050 - Read as many FIFO elements as possible in one bus access. * men,s188 - Drop redundant initialization of driver owner field. * microchip,mcp4018 and mcp4531 - Use i2c_get_match_data() instead of open coding. Includes making the data format the same for the i2c_device_id and firmware match tables. * semtech,sx9310 - dt-bindings: Add reference to IIO schema to provide the label property. * semtech,sx9324 - dt-bindings: Add reference to IIO schema to provide the label property. * st,stm32-adc - Use devm_platform_get_and_ioremap_resource() instead of open coded version. * st,stm-lptimer-trigger - Drop setting platform drvdata as it wasn't then used. * ti,ads1015 - Fix wrong dt binding description of ti,datarate for some devices. * vishay,vcnl4200 - Move to switch statements for channel type checking to make later additions simpler. * tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits) Documentation: ABI: testing: admv8818: add bypass drivers: iio: filter: admv8818: add bypass mode iio: light: bd27008: Support BD27010 RGB iio: light: bu27008: add chip info dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor iio: add MCP4728 I2C DAC driver dt-bindings: iio: dac: add mcp4728.yaml drivers: iio: admv1013: add vcc regulators dt-bindings: iio: admv1013: add vcc regulators iio: trigger: stm32-lptimer-trigger: remove unneeded platform_set_drvdata() iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driver dt-bindings: iio: admv1014: make all regs required iio: cdc: ad7150: relax return value check for IRQ get iio: mb1232: relax return value check for IRQ get iio: adc: fix the return value handle for platform_get_irq() tools: iio: iio_generic_buffer: Fix some integer type and calculation iio: potentiometer: mcp4531: Use i2c_get_match_data() iio: potentiometer: mcp4018: Use i2c_get_match_data() iio: core: Fix issues and style of the comments iio: core: Switch to krealloc_array() ...
2023-08-11Merge tag 'block-6.5-2023-08-11' of git://git.kernel.dk/linuxLinus Torvalds2-2/+1
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - Fixes for request_queue state (Ming) - Another uuid quirk (August) - RCU poll fix for NVMe (Ming) - Fix for an IO stall with polled IO (me) - Fix for blk-iocost stats enable/disable accounting (Chengming) - Regression fix for large pages for zram (Christoph) * tag 'block-6.5-2023-08-11' of git://git.kernel.dk/linux: nvme: core: don't hold rcu read lock in nvme_ns_chr_uring_cmd_iopoll blk-iocost: fix queue stats accounting block: don't make REQ_POLLED imply REQ_NOWAIT block: get rid of unused plug->nowait flag zram: take device and not only bvec offset into account nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G nvme-rdma: fix potential unbalanced freeze & unfreeze nvme-tcp: fix potential unbalanced freeze & unfreeze nvme: fix possible hang when removing a controller during error recovery
2023-08-11tty: ldops: unify to u8Jiri Slaby (SUSE)1-7/+6
Some hooks in struct tty_ldisc_ops still reference buffers by 'unsigned char'. Unify to 'u8' as the rest of the tty layer does. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Marcel Holtmann <[email protected]> Cc: Johan Hedberg <[email protected]> Cc: Luiz Augusto von Dentz <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: make tty_operations::write()'s count size_tJiri Slaby (SUSE)1-3/+3
Unify with the rest of the code. Use size_t for counts and ssize_t for retval. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: propagate u8 data to tty_operations::put_char()Jiri Slaby (SUSE)1-1/+1
Data are now typed as u8. Propagate this change to tty_operations::put_char(). Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Alexander Gordeev <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Karsten Keil <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: propagate u8 data to tty_operations::write()Jiri Slaby (SUSE)1-2/+1
Data are now typed as u8. Propagate this change to tty_operations::write(). Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Anton Ivanov <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Max Filippov <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Vaibhav Gupta <[email protected]> Cc: Jens Taprogge <[email protected]> Cc: Karsten Keil <[email protected]> Cc: Scott Branden <[email protected]> Cc: Ulf Hansson <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Alexander Gordeev <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: David Lin <[email protected]> Cc: Johan Hovold <[email protected]> Cc: Alex Elder <[email protected]> Cc: Laurentiu Tudor <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: David Sterba <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Arnaud Pouliquen <[email protected]> Cc: Oliver Neukum <[email protected]> Cc: Mathias Nyman <[email protected]> Cc: Marcel Holtmann <[email protected]> Cc: Johan Hedberg <[email protected]> Cc: Luiz Augusto von Dentz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: tty_buffer: make all offsets unsignedJiri Slaby (SUSE)1-5/+5
All these are supposed/expected to be unsigned as they are either counts or offsets. So switch to unsigned for clarity. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: make char_buf_ptr()/flag_buf_ptr()'s offset unsignedJiri Slaby (SUSE)1-2/+2
The offset is meant from the beginning of data, so unsigned. Make it as such for clarity. All struct tty_buffer's members should be unsigned too -- see the next patch. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11misc: ti-st: make st_recv() conforming to tty_ldisc_ops::receive_buf()Jiri Slaby (SUSE)1-1/+1
That is change data type to u8 and count to unsigned int. And propagate to both hooks (st_kim_recv() and kim_int_recv()). Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: use u8 for flagsJiri Slaby (SUSE)3-13/+13
This makes all those 'char's an explicit 'u8'. This is part of the continuing unification of chars and flags to be consistent u8. This approaches tty_port_default_receive_buf(). Note that we do not change signedness as we compile with -funsigned-char. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: William Hubbs <[email protected]> Cc: Chris Brannon <[email protected]> Cc: Kirk Reiser <[email protected]> Cc: Samuel Thibault <[email protected]> Cc: Marcel Holtmann <[email protected]> Cc: Johan Hedberg <[email protected]> Cc: Luiz Augusto von Dentz <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Max Staudt <[email protected]> Cc: Wolfgang Grandegger <[email protected]> Cc: Marc Kleine-Budde <[email protected]> Cc: Dario Binacchi <[email protected]> Cc: Andreas Koensgen <[email protected]> Cc: Jeremy Kerr <[email protected]> Cc: Matt Johnston <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: use u8 for charsJiri Slaby (SUSE)3-23/+21
This makes all those 'unsigned char's an explicit 'u8'. This is part of the continuing unification of chars and flags to be consistent u8. This approaches tty_port_default_receive_buf(). Flags to be next. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: William Hubbs <[email protected]> Cc: Chris Brannon <[email protected]> Cc: Kirk Reiser <[email protected]> Cc: Samuel Thibault <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Max Staudt <[email protected]> Cc: Wolfgang Grandegger <[email protected]> Cc: Marc Kleine-Budde <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Dario Binacchi <[email protected]> Cc: Andreas Koensgen <[email protected]> Cc: Jeremy Kerr <[email protected]> Cc: Matt Johnston <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Peter Ujfalusi <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: make tty_ldisc_ops::*buf*() hooks operate on size_tJiri Slaby (SUSE)1-8/+8
Count passed to tty_ldisc_ops::receive_buf*(), ::lookahead_buf(), and returned from ::receive_buf2() is expected to be size_t. So set it to size_t to unify with the rest of the code. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: William Hubbs <[email protected]> Cc: Chris Brannon <[email protected]> Cc: Kirk Reiser <[email protected]> Cc: Samuel Thibault <[email protected]> Cc: Marcel Holtmann <[email protected]> Cc: Johan Hedberg <[email protected]> Cc: Luiz Augusto von Dentz <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Max Staudt <[email protected]> Cc: Wolfgang Grandegger <[email protected]> Cc: Marc Kleine-Budde <[email protected]> Cc: Dario Binacchi <[email protected]> Cc: Andreas Koensgen <[email protected]> Cc: Jeremy Kerr <[email protected]> Cc: Matt Johnston <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: switch count in tty_ldisc_receive_buf() to size_tJiri Slaby (SUSE)1-2/+2
It comes from both paste_selection() and tty_port_default_receive_buf() as unsigned (int and size_t respectively). Switch to size_t to converge to that eventually. Return the count as size_t too (the two callers above expect that). Switch paste_selection()'s type of 'count' too, so that the returned and passed type match. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: make counts in tty_port_client_operations hooks size_tJiri Slaby (SUSE)1-3/+3
The counts in tty_port_client_operations hooks' are currently represented by all 'int', 'unsigned int', and 'size_t'. Unify them all to unsigned 'size_t' for clarity. Note that size_t is used already in tty_buffer.c. So, eventually, it is spread for counts everywhere and this is the beginning. So the two changes namely: * ::receive_buf() is called from tty_ldisc_receive_buf(). And that expects values ">= 0" from ::receive_buf(), so switch its rettype to size_t is fine. tty_ldisc_receive_buf() types will be changed separately. * ::lookahead_buf()'s count comes from lookahead_bufs() and is already 'unsigned int'. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: make tty_port_client_operations operate with u8Jiri Slaby (SUSE)1-3/+4
The parameters are already unsigned chars. So make them explicitly u8s, as the rest is going to be unified to u8 eventually too. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11tty: ldisc: document that ldops are optionalJiri Slaby (SUSE)1-5/+25
There is no need to provide any hook in struct tty_ldisc_ops. Document that and write down that read/write return EIO in that case. The rest is simply ignored. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-11Bluetooth: hci_conn: avoid checking uninitialized CIG/CIS idsPauli Virtanen1-2/+2
The CIS/CIG ids of ISO connections are defined only when the connection is unicast. Fix the lookup functions to check for unicast first. Ensure CIG/CIS IDs have valid value also in state BT_OPEN. Signed-off-by: Pauli Virtanen <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-08-11Bluetooth: hci_sync: Introduce PTR_UINT/UINT_PTR macrosLuiz Augusto von Dentz1-0/+3
This introduces PTR_UINT/UINT_PTR macros and replace the use of PTR_ERR/ERR_PTR. Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-08-11Bluetooth: hci_core: Make hci_is_le_conn_scanning publicLuiz Augusto von Dentz1-0/+21
This moves hci_is_le_conn_scanning to hci_core.h so it can be used by different files without having to duplicate its code. Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-08-11Bluetooth: hci_conn: Fix modifying handle while abortingLuiz Augusto von Dentz1-0/+1
This introduces hci_conn_set_handle which takes care of verifying the conditions where the hci_conn handle can be modified, including when hci_conn_abort has been called and also checks that the handles is valid as well. Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.