aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-01-27ethtool: add WOL_NTF notificationMichal Kubecek1-0/+1
Send ETHTOOL_MSG_WOL_NTF notification whenever wake-on-lan settings of a device are modified using ETHTOOL_MSG_WOL_SET netlink message or ETHTOOL_SWOL ioctl request. As notifications can be received by anyone, do not include SecureOn(tm) password in notification messages. Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27ethtool: set wake-on-lan settings with WOL_SET requestMichal Kubecek1-0/+1
Implement WOL_SET netlink request to set wake-on-lan settings. This is equivalent to ETHTOOL_SWOL ioctl request. Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27ethtool: provide WoL settings with WOL_GET requestMichal Kubecek2-0/+19
Implement WOL_GET request to get wake-on-lan settings for a device, traditionally available via ETHTOOL_GWOL ioctl request. As part of the implementation, provide symbolic names for wake-on-line modes as ETH_SS_WOL_MODES string set. Signed-off-by: Michal Kubecek <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27ethtool: add DEBUG_NTF notificationMichal Kubecek1-0/+1
Send ETHTOOL_MSG_DEBUG_NTF notification message whenever debugging message mask for a device are modified using ETHTOOL_MSG_DEBUG_SET netlink message or ETHTOOL_SMSGLVL ioctl request. The notification message has the same format as reply to DEBUG_GET request. As with other ethtool notifications, netlink requests only trigger the notification if the mask is actually changed while ioctl request trigger it whenever the request results in calling the ethtool_ops handler. Signed-off-by: Michal Kubecek <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27ethtool: set message mask with DEBUG_SET requestMichal Kubecek1-0/+1
Implement DEBUG_SET netlink request to set debugging settings for a device. At the moment, only message mask corresponding to message level as set by ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) Signed-off-by: Michal Kubecek <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27ethtool: provide message mask with DEBUG_GET requestMichal Kubecek3-15/+57
Implement DEBUG_GET request to get debugging settings for a device. At the moment, only message mask corresponding to message level as reported by ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) As part of the implementation, provide symbolic names for message mask bits as ETH_SS_MSG_CLASSES string set. Signed-off-by: Michal Kubecek <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27Merge branch 'pm-devfreq'Rafael J. Wysocki1-10/+19
* pm-devfreq: (24 commits) PM / devfreq: Add debugfs support with devfreq_summary file PM / devfreq: exynos: Rename Exynos to lowercase PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event PM / devfreq: exynos-bus: Disable devfreq-event device when fails PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails PM / devfreq: imx8m-ddrc: Remove unused defines PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource PM / devfreq: rk3399_dmc: Add missing of_node_put() PM / devfreq: rockchip-dfi: Add missing of_node_put() PM / devfreq: Fix multiple kernel-doc warnings PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive() PM / devfreq: exynos-bus: Extract exynos_bus_profile_init() PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq) PM / devfreq: Move statistics to separate struct devfreq_stats PM / devfreq: Add clearing transitions stats PM / devfreq: Change time stats to 64-bit PM / devfreq: Add new name attribute for sysfs ...
2020-01-27Merge branches 'pm-core', 'powercap', 'pm-opp', 'pm-avs' and 'pm-misc'Rafael J. Wysocki1-0/+6
* pm-core: PM-runtime: add tracepoints for usage_count changes * powercap: powercap/intel_rapl: add support for JasperLake x86/cpu: Add Jasper Lake to Intel family powercap/intel_rapl: add support for TigerLake Mobile * pm-opp: opp: Replace list_kref with a local counter opp: Free static OPPs on errors while adding them * pm-avs: power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static power: avs: qcom-cpr: remove set but unused variable power: avs: qcom-cpr: make sure that regmap is available power: avs: qcom-cpr: fix unsigned expression compared with zero power: avs: qcom-cpr: fix invalid printk specifier in debug print power: avs: Add support for CPR (Core Power Reduction) dt-bindings: power: avs: Add support for CPR (Core Power Reduction) * pm-misc: mailmap: Add entry for <[email protected]>
2020-01-27Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki1-0/+2
* pm-cpufreq: cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether" cpufreq: s3c: fix unbalances of cpufreq policy refcount cpufreq: imx-cpufreq-dt: Add i.MX8MP support cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading cpufreq: tegra186: convert to devm_platform_ioremap_resource cpufreq: kirkwood: convert to devm_platform_ioremap_resource cpufreq: CPPC: put ACPI table after using it cpufreq : CPPC: Break out if HiSilicon CPPC workaround is matched * pm-sleep: PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior PM: hibernate: fix spelling mistake "shapshot" -> "snapshot" PM: hibernate: Add more logging on hibernation failure PM: hibernate: improve arithmetic division in preallocate_highmem_fraction() PM: wakeup: Show statistics for deleted wakeup sources again PM: sleep: Switch to rtc_time64_to_tm()/rtc_tm_to_time64()
2020-01-27Merge branch 'pm-cpuidle'Rafael J. Wysocki2-5/+16
* pm-cpuidle: (27 commits) intel_idle: Clean up irtl_2_usec() intel_idle: Move 3 functions closer to their callers intel_idle: Annotate initialization code and data structures intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit() intel_idle: Rearrange intel_idle_cpuidle_driver_init() intel_idle: Clean up NULL pointer check in intel_idle_init() intel_idle: Fold intel_idle_probe() into intel_idle_init() intel_idle: Eliminate __setup_broadcast_timer() cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings cpuidle: sysfs: fix warnings when compiling with W=1 cpuidle: coupled: fix warnings when compiling with W=1 Documentation: admin-guide: PM: Add intel_idle document cpuidle: arm: Enable compile testing for some of drivers cpuidle: Drop unused cpuidle_driver_ref/unref() functions intel_idle: Use ACPI _CST on server systems intel_idle: Add module parameter to prevent ACPI _CST from being used intel_idle: Allow ACPI _CST to be used for selected known processors cpuidle: Allow idle states to be disabled by default intel_idle: Use ACPI _CST for processor models without C-state tables intel_idle: Refactor intel_idle_cpuidle_driver_init() ...
2020-01-27Merge branch 'for-upstream' of ↵David S. Miller5-3/+201
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-01-26 Here's (probably) the last bluetooth-next pull request for the 5.6 kernel. - Initial pieces of Bluetooth 5.2 Isochronous Channels support - mgmt: Various cleanups and a new Set Blocked Keys command - btusb: Added support for 04ca:3021 QCA_ROME device - hci_qca: Multiple fixes & cleanups - hci_bcm: Fixes & improved device tree support - Fixed attempts to create duplicate debugfs entries Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-27net: remove eth_change_mtuHeiner Kallweit1-1/+0
All usage of this function was removed three years ago, and the function was marked as deprecated: a52ad514fdf3 ("net: deprecate eth_change_mtu, remove usage") So I think we can remove it now. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27net: introduce dev_net notifier register/unregister variantsJiri Pirko1-0/+17
Introduce dev_net variants of netdev notifier register/unregister functions and allow per-net notifier to follow the netdevice into the namespace it is moved to. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27udp: Support UDP fraglist GRO/GSO.Steffen Klassert1-1/+1
This patch extends UDP GRO to support fraglist GRO/GSO by using the previously introduced infrastructure. If the feature is enabled, all UDP packets are going to fraglist GRO (local input and forward). After validating the csum, we mark ip_summed as CHECKSUM_UNNECESSARY for fraglist GRO packets to make sure that the csum is not touched. Signed-off-by: Steffen Klassert <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27net: Support GRO/GSO fraglist chaining.Steffen Klassert2-1/+5
This patch adds the core functions to chain/unchain GSO skbs at the frag_list pointer. This also adds a new GSO type SKB_GSO_FRAGLIST and a is_flist flag to napi_gro_cb which indicates that this flow will be GROed by fraglist chaining. Signed-off-by: Steffen Klassert <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27net: Add a netdev software feature set that defaults to off.Steffen Klassert1-0/+3
The previous patch added the NETIF_F_GRO_FRAGLIST feature. This is a software feature that should default to off. Current software features default to on, so add a new feature set that defaults to off. Signed-off-by: Steffen Klassert <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27net: Add fraglist GRO/GSO feature flagsSteffen Klassert3-1/+8
This adds new Fraglist GRO/GSO feature flags. They will be used to configure fraglist GRO/GSO what will be implemented with some followup paches. Signed-off-by: Steffen Klassert <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27Merge branch 'acpica'Rafael J. Wysocki22-23/+34
* acpica: ACPICA: Update version to 20200110 ACPICA: All acpica: Update copyrights to 2020 Including tool signons. ACPICA: Update the list of maintainers ACPICA: Update version to 20191213 ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator ACPICA: acpisrc: add unix line ending support for non-windows build ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1 ACPICA: debugger: fix spelling mistake "adress" -> "address"
2020-01-27net_sched: fix ops->bind_class() implementationsCong Wang2-15/+21
The current implementations of ops->bind_class() are merely searching for classid and updating class in the struct tcf_result, without invoking either of cl_ops->bind_tcf() or cl_ops->unbind_tcf(). This breaks the design of them as qdisc's like cbq use them to count filters too. This is why syzbot triggered the warning in cbq_destroy_class(). In order to fix this, we have to call cl_ops->bind_tcf() and cl_ops->unbind_tcf() like the filter binding path. This patch does so by refactoring out two helper functions __tcf_bind_filter() and __tcf_unbind_filter(), which are lockless and accept a Qdisc pointer, then teaching each implementation to call them correctly. Note, we merely pass the Qdisc pointer as an opaque pointer to each filter, they only need to pass it down to the helper functions without understanding it at all. Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class") Reported-and-tested-by: [email protected] Reported-and-tested-by: [email protected] Cc: Jamal Hadi Salim <[email protected]> Cc: Jiri Pirko <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-27thermal: exynos: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-27thermal/drivers/cpu_cooling: Rename to cpufreq_coolingDaniel Lezcano1-1/+1
As we introduced the idle injection cooling device called cpuidle_cooling, let's be consistent and rename the cpu_cooling to cpufreq_cooling as this one mitigates with OPPs changes. Signed-off-by: Daniel Lezcano <[email protected]> Acked-by: Viresh Kumar <[email protected]> Reviewed-by: Amit Kucheria <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-27thermal/drivers/cpu_cooling: Introduce the cpu idle cooling driverDaniel Lezcano1-0/+18
The cpu idle cooling device offers a new method to cool down a CPU by injecting idle cycles at runtime. It has some similarities with the intel power clamp driver but it is actually designed to be more generic and relying on the idle injection powercap framework. The idle injection duration is fixed while the running duration is variable. That allows to have control on the device reactivity for the user experience. An idle state powering down the CPU or the cluster will allow to drop the static leakage, thus restoring the heat capacity of the SoC. It can be set with a trip point between the hot and the critical points, giving the opportunity to prevent a hard reset of the system when the cpufreq cooling fails to cool down the CPU. With more sophisticated boards having a per core sensor, the idle cooling device allows to cool down a single core without throttling the compute capacity of several cpus belonging to the same clock line, so it could be used in collaboration with the cpufreq cooling device. Signed-off-by: Daniel Lezcano <[email protected]> Acked-by: Viresh Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-27thermal/drivers/Kconfig: Convert the CPU cooling device to a choiceDaniel Lezcano1-3/+3
The next changes will add a new way to cool down a CPU by injecting idle cycles. With the current configuration, a CPU cooling device is the cpufreq cooling device. As we want to add a new CPU cooling device, let's convert the CPU cooling to a choice giving a list of CPU cooling devices. At this point, there is obviously only one CPU cooling device. There is no functional changes. Signed-off-by: Daniel Lezcano <[email protected]> Acked-by: Viresh Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-27nf_tables: Add set type for arbitrary concatenation of rangesStefano Brivio1-0/+1
This new set type allows for intervals in concatenated fields, which are expressed in the usual way, that is, simple byte concatenation with padding to 32 bits for single fields, and given as ranges by specifying start and end elements containing, each, the full concatenation of start and end values for the single fields. Ranges are expanded to composing netmasks, for each field: these are inserted as rules in per-field lookup tables. Bits to be classified are divided in 4-bit groups, and for each group, the lookup table contains 4^2 buckets, representing all the possible values of a bit group. This approach was inspired by the Grouper algorithm: http://www.cse.usf.edu/~ligatti/projects/grouper/ Matching is performed by a sequence of AND operations between bucket values, with buckets selected according to the value of packet bits, for each group. The result of this sequence tells us which rules matched for a given field. In order to concatenate several ranged fields, per-field rules are mapped using mapping arrays, one per field, that specify which rules should be considered while matching the next field. The mapping array for the last field contains a reference to the element originally inserted. The notes in nft_set_pipapo.c cover the algorithm in deeper detail. A pure hash-based approach is of no use here, as ranges need to be classified. An implementation based on "proxying" the existing red-black tree set type, creating a tree for each field, was considered, but deemed impractical due to the fact that elements would need to be shared between trees, at least as long as we want to keep UAPI changes to a minimum. A stand-alone implementation of this algorithm is available at: https://pipapo.lameexcu.se together with notes about possible future optimisations (in pipapo.c). This algorithm was designed with data locality in mind, and can be highly optimised for SIMD instruction sets, as the bulk of the matching work is done with repetitive, simple bitwise operations. At this point, without further optimisations, nft_concat_range.sh reports, for one AMD Epyc 7351 thread (2.9GHz, 512 KiB L1D$, 8 MiB L2$): TEST: performance net,port [ OK ] baseline (drop from netdev hook): 10190076pps baseline hash (non-ranged entries): 6179564pps baseline rbtree (match on first field only): 2950341pps set with 1000 full, ranged entries: 2304165pps port,net [ OK ] baseline (drop from netdev hook): 10143615pps baseline hash (non-ranged entries): 6135776pps baseline rbtree (match on first field only): 4311934pps set with 100 full, ranged entries: 4131471pps net6,port [ OK ] baseline (drop from netdev hook): 9730404pps baseline hash (non-ranged entries): 4809557pps baseline rbtree (match on first field only): 1501699pps set with 1000 full, ranged entries: 1092557pps port,proto [ OK ] baseline (drop from netdev hook): 10812426pps baseline hash (non-ranged entries): 6929353pps baseline rbtree (match on first field only): 3027105pps set with 30000 full, ranged entries: 284147pps net6,port,mac [ OK ] baseline (drop from netdev hook): 9660114pps baseline hash (non-ranged entries): 3778877pps baseline rbtree (match on first field only): 3179379pps set with 10 full, ranged entries: 2082880pps net6,port,mac,proto [ OK ] baseline (drop from netdev hook): 9718324pps baseline hash (non-ranged entries): 3799021pps baseline rbtree (match on first field only): 1506689pps set with 1000 full, ranged entries: 783810pps net,mac [ OK ] baseline (drop from netdev hook): 10190029pps baseline hash (non-ranged entries): 5172218pps baseline rbtree (match on first field only): 2946863pps set with 1000 full, ranged entries: 1279122pps v4: - fix build for 32-bit architectures: 64-bit division needs div_u64() (kbuild test robot <[email protected]>) v3: - rework interface for field length specification, NFT_SET_SUBKEY disappears and information is stored in description - remove scratch area to store closing element of ranges, as elements now come with an actual attribute to specify the upper range limit (Pablo Neira Ayuso) - also remove pointer to 'start' element from mapping table, closing key is now accessible via extension data - use bytes right away instead of bits for field lengths, this way we can also double the inner loop of the lookup function to take care of upper and lower bits in a single iteration (minor performance improvement) - make it clearer that set operations are actually atomic API-wise, but we can't e.g. implement flush() as one-shot action - fix type for 'dup' in nft_pipapo_insert(), check for duplicates only in the next generation, and in general take care of differentiating generation mask cases depending on the operation (Pablo Neira Ayuso) - report C implementation matching rate in commit message, so that AVX2 implementation can be compared (Pablo Neira Ayuso) v2: - protect access to scratch maps in nft_pipapo_lookup() with local_bh_disable/enable() (Florian Westphal) - drop rcu_read_lock/unlock() from nft_pipapo_lookup(), it's already implied (Florian Westphal) - explain why partial allocation failures don't need handling in pipapo_realloc_scratch(), rename 'm' to clone and update related kerneldoc to make it clear we're not operating on the live copy (Florian Westphal) - add expicit check for priv->start_elem in nft_pipapo_insert() to avoid ending up in nft_pipapo_walk() with a NULL start element, and also zero it out in every operation that might make it invalid, so that insertion doesn't proceed with an invalid element (Florian Westphal) Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-01-27bitmap: Introduce bitmap_cut(): cut bits and shift remainingStefano Brivio1-0/+4
The new bitmap function bitmap_cut() copies bits from source to destination by removing the region specified by parameters first and cut, and remapping the bits above the cut region by right shifting them. Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-01-27netfilter: nf_tables: Support for sets with multiple ranged fieldsStefano Brivio2-0/+23
Introduce a new nested netlink attribute, NFTA_SET_DESC_CONCAT, used to specify the length of each field in a set concatenation. This allows set implementations to support concatenation of multiple ranged items, as they can divide the input key into matching data for every single field. Such set implementations would be selected as they specify support for NFT_SET_INTERVAL and allow desc->field_count to be greater than one. Explicitly disallow this for nft_set_rbtree. In order to specify the interval for a set entry, userspace would include in NFTA_SET_DESC_CONCAT attributes field lengths, and pass range endpoints as two separate keys, represented by attributes NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_KEY_END. While at it, export the number of 32-bit registers available for packet matching, as nftables will need this to know the maximum number of field lengths that can be specified. For example, "packets with an IPv4 address between 192.0.2.0 and 192.0.2.42, with destination port between 22 and 25", can be expressed as two concatenated elements: NFTA_SET_ELEM_KEY: 192.0.2.0 . 22 NFTA_SET_ELEM_KEY_END: 192.0.2.42 . 25 and NFTA_SET_DESC_CONCAT attribute would contain: NFTA_LIST_ELEM NFTA_SET_FIELD_LEN: 4 NFTA_LIST_ELEM NFTA_SET_FIELD_LEN: 2 v4: No changes v3: Complete rework, NFTA_SET_DESC_CONCAT instead of NFTA_SET_SUBKEY v2: No changes Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-01-27netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attributePablo Neira Ayuso2-1/+15
Add NFTA_SET_ELEM_KEY_END attribute to convey the closing element of the interval between kernel and userspace. This patch also adds the NFT_SET_EXT_KEY_END extension to store the closing element value in this interval. v4: No changes v3: New patch [sbrivio: refactor error paths and labels; add corresponding nft_set_ext_type for new key; rebase] Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-01-26Merge tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+12
Pull block fix from Jens Axboe: "Unfortunately this weekend we had a few last minute reports, one was for block. The partition disable for zoned devices was overly restrictive, it can work (and be supported) just fine for host-aware variants. Here's a fix ensuring that's the case so we don't break existing users of that" * tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block: block: allow partitions on host aware zone devices
2020-01-26block: allow partitions on host aware zone devicesChristoph Hellwig1-0/+12
Host-aware SMR drives can be used with the commands to explicitly manage zone state, but they can also be used as normal disks. In the former case it makes perfect sense to allow partitions on them, in the latter it does not, just like for host managed devices. Add a check to add_partition to allow partitions on host aware devices, but give up any zone management capabilities in that case, which also catches the previously missed case of adding a partition vs just scanning it. Because sd can rescan the attribute at runtime it needs to check if a disk has partitions, for which a new helper is added to genhd.h. Fixes: 5eac3eb30c9a ("block: Remove partition support for zoned block devices") Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Tested-by: Damien Le Moal <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-26tcp: export count for rehash attemptsAbdul Kabbani3-0/+5
Using IPv6 flow-label to swiftly route around avoid congested or disconnected network path can greatly improve TCP reliability. This patch adds SNMP counters and a OPT_STATS counter to track both host-level and connection-level statistics. Network administrators can use these counters to evaluate the impact of this new ability better. Export count for rehash attempts to 1) two SNMP counters: TcpTimeoutRehash (rehash due to timeouts), and TcpDuplicateDataRehash (rehash due to receiving duplicate packets) 2) Timestamping API SOF_TIMESTAMPING_OPT_STATS. Signed-off-by: Abdul Kabbani <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Kevin(Yudong) Yang <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller7-15/+51
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <[email protected]>
2020-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds4-8/+4
Pull networking fixes from David Miller: 1) Off by one in mt76 airtime calculation, from Dan Carpenter. 2) Fix TLV fragment allocation loop condition in iwlwifi, from Luca Coelho. 3) Don't confirm neigh entries when doing ipsec pmtu updates, from Xu Wang. 4) More checks to make sure we only send TSO packets to lan78xx chips that they can actually handle. From James Hughes. 5) Fix ip_tunnel namespace move, from William Dauchy. 6) Fix unintended packet reordering due to cooperation between listification done by GRO and non-GRO paths. From Maxim Mikityanskiy. 7) Add Jakub Kicincki formally as networking co-maintainer. 8) Info leak in airo ioctls, from Michael Ellerman. 9) IFLA_MTU attribute needs validation during rtnl_create_link(), from Eric Dumazet. 10) Use after free during reload in mlxsw, from Ido Schimmel. 11) Dangling pointers are possible in tp->highest_sack, fix from Eric Dumazet. 12) Missing *pos++ in various networking seq_next handlers, from Vasily Averin. 13) CHELSIO_GET_MEM operation neds CAP_NET_ADMIN check, from Michael Ellerman. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (109 commits) firestream: fix memory leaks net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM net: bcmgenet: Use netif_tx_napi_add() for TX NAPI tipc: change maintainer email address net: stmmac: platform: fix probe for ACPI devices net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path net/mlx5e: kTLS, Remove redundant posts in TX resync flow net/mlx5e: kTLS, Fix corner-case checks in TX resync flow net/mlx5e: Clear VF config when switching modes net/mlx5: DR, use non preemptible call to get the current cpu number net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep net/mlx5: DR, Enable counter on non-fwd-dest objects net/mlx5: Update the list of the PCI supported devices net/mlx5: Fix lowest FDB pool size net: Fix skb->csum update in inet_proto_csum_replace16(). netfilter: nf_tables: autoload modules from the abort path netfilter: nf_tables: add __nft_chain_type_get() netfilter: nf_tables_offload: fix check the chain offload flag netfilter: conntrack: sctp: use distinct states for new SCTP connections ipv6_route_seq_next should increase position index ...
2020-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller3-8/+2
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing netlink attribute sanity check for NFTA_OSF_DREG, from Florian Westphal. 2) Use bitmap infrastructure in ipset to fix KASAN slab-out-of-bounds reads, from Jozsef Kadlecsik. 3) Missing initial CLOSED state in new sctp connection through ctnetlink events, from Jiri Wiesner. 4) Missing check for NFT_CHAIN_HW_OFFLOAD in nf_tables offload indirect block infrastructure, from wenxu. 5) Add __nft_chain_type_get() to sanity check family and chain type. 6) Autoload modules from the nf_tables abort path to fix races reported by syzbot. 7) Remove unnecessary skb->csum update on inet_proto_csum_replace16(), from Praveen Chaudhary. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-25bpf: Allow to resolve bpf trampoline and dispatcher in unwindJiri Olsa1-1/+11
When unwinding the stack we need to identify each address to successfully continue. Adding latch tree to keep trampolines for quick lookup during the unwind. The patch uses first 48 bytes for latch tree node, leaving 4048 bytes from the rest of the page for trampoline or dispatcher generated code. It's still enough not to affect trampoline and dispatcher progs maximum counts. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-01-25net: sched: Make TBF Qdisc offloadablePetr Machata2-0/+23
Invoke ndo_setup_tc as appropriate to signal init / replacement, destroying and dumping of TBF Qdisc. Signed-off-by: Petr Machata <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-25Merge branch 'for-mingo' of ↵Ingo Molnar10-95/+206
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Expedited grace-period updates - kfree_rcu() updates - RCU list updates - Preemptible RCU updates - Torture-test updates - Miscellaneous fixes - Documentation updates Signed-off-by: Ingo Molnar <[email protected]>
2020-01-25mptcp: do not inherit inet proto opsFlorian Westphal1-0/+3
We need to initialise the struct ourselves, else we expose tcp-specific callbacks such as tcp_splice_read which will then trigger splat because the socket is an mptcp one: BUG: KASAN: slab-out-of-bounds in tcp_mstamp_refresh+0x80/0xa0 net/ipv4/tcp_output.c:57 Write of size 8 at addr ffff888116aa21d0 by task syz-executor.0/5478 CPU: 1 PID: 5478 Comm: syz-executor.0 Not tainted 5.5.0-rc6 #3 Call Trace: tcp_mstamp_refresh+0x80/0xa0 net/ipv4/tcp_output.c:57 tcp_rcv_space_adjust+0x72/0x7f0 net/ipv4/tcp_input.c:612 tcp_read_sock+0x622/0x990 net/ipv4/tcp.c:1674 tcp_splice_read+0x20b/0xb40 net/ipv4/tcp.c:791 do_splice+0x1259/0x1560 fs/splice.c:1205 To prevent build error with ipv6, add the recv/sendmsg function declaration to ipv6.h. The functions are already accessible "thanks" to retpoline related work, but they are currently only made visible by socket.c specific INDIRECT_CALLABLE macros. Reported-by: Christoph Paasch <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-24alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=nStephen Boyd1-0/+4
The stubbed version of alarmtimer_get_rtcdev() is not exported. so this won't work if this function is used in a module when CONFIG_RTC_CLASS=n. Move the stub function to the header file and make it inline so that callers don't have to worry about linking against this symbol. rtcdev isn't used outside of this ifdef so it's not required to be redefined to NULL. Drop that while touching this area. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-24netfilter: nf_tables: autoload modules from the abort pathPablo Neira Ayuso2-1/+2
This patch introduces a list of pending module requests. This new module list is composed of nft_module_request objects that contain the module name and one status field that tells if the module has been already loaded (the 'done' field). In the first pass, from the preparation phase, the netlink command finds that a module is missing on this list. Then, a module request is allocated and added to this list and nft_request_module() returns -EAGAIN. This triggers the abort path with the autoload parameter set on from nfnetlink, request_module() is called and the module request enters the 'done' state. Since the mutex is released when loading modules from the abort phase, the module list is zapped so this is iteration occurs over a local list. Therefore, the request_module() calls happen when object lists are in consistent state (after fulling aborting the transaction) and the commit list is empty. On the second pass, the netlink command will find that it already tried to load the module, so it does not request it again and nft_request_module() returns 0. Then, there is a look up to find the object that the command was missing. If the module was successfully loaded, the command proceeds normally since it finds the missing object in place, otherwise -ENOENT is reported to userspace. This patch also updates nfnetlink to include the reason to enter the abort phase, which is required for this new autoload module rationale. Fixes: ec7470b834fe ("netfilter: nf_tables: store transaction list locally while requesting module") Reported-by: [email protected] Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-01-24smp: Remove allocation mask from on_each_cpu_cond.*()Sebastian Andrzej Siewior1-3/+2
The allocation mask is no longer used by on_each_cpu_cond() and on_each_cpu_cond_mask() and can be removed. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-24smp: Use smp_cond_func_t as type for the conditional functionSebastian Andrzej Siewior1-6/+6
Use a typdef for the conditional function instead defining it each time in the function prototype. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-24Merge tag 'irqchip-5.6' of ↵Thomas Gleixner4-9/+101
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Conversion of the SiFive PLIC to hierarchical domains - New SiFive GPIO irqchip driver - New Aspeed SCI irqchip driver - New NXP INTMUX irqchip driver - Additional support for the Meson A1 GPIO irqchip - First part of the GICv4.1 support - Assorted fixes
2020-01-24Merge branches 'doc.2019.12.10a', 'exp.2019.12.09a', 'fixes.2020.01.24a', ↵Paul E. McKenney10-95/+206
'kfree_rcu.2020.01.24a', 'list.2020.01.10a', 'preempt.2020.01.24a' and 'torture.2019.12.09a' into HEAD doc.2019.12.10a: Documentations updates exp.2019.12.09a: Expedited grace-period updates fixes.2020.01.24a: Miscellaneous fixes kfree_rcu.2020.01.24a: Batch kfree_rcu() work list.2020.01.10a: RCU-protected-list updates preempt.2020.01.24a: Preemptible RCU updates torture.2019.12.09a: Torture-test updates
2020-01-24rcu: Move rcu_{expedited,normal} definitions into rcupdate.hBen Dooks1-0/+4
This commit moves the rcu_{expedited,normal} definitions from kernel/rcu/update.c to include/linux/rcupdate.h to make sure they are in sync, and also to avoid the following warning from sparse: kernel/ksysfs.c:150:5: warning: symbol 'rcu_expedited' was not declared. Should it be static? kernel/ksysfs.c:167:5: warning: symbol 'rcu_normal' was not declared. Should it be static? Signed-off-by: Ben Dooks <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2020-01-24rcu: Remove kfree_call_rcu_nobatch()Joel Fernandes (Google)2-6/+0
Now that the kfree_rcu() special-casing has been removed from tree RCU, this commit removes kfree_call_rcu_nobatch() since it is no longer needed. Signed-off-by: Joel Fernandes (Google) <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2020-01-24rcu: Remove kfree_rcu() special casing and lazy-callback handlingJoel Fernandes (Google)2-22/+12
This commit removes kfree_rcu() special-casing and the lazy-callback handling from Tree RCU. It moves some of this special casing to Tiny RCU, the removal of which will be the subject of later commits. This results in a nice negative delta. Suggested-by: Paul E. McKenney <[email protected]> Signed-off-by: Joel Fernandes (Google) <[email protected]> [ paulmck: Add slab.h #include, thanks to kbuild test robot <[email protected]>. ] Signed-off-by: Paul E. McKenney <[email protected]>
2020-01-24rcu: Add basic support for kfree_rcu() batchingByungchul Park2-0/+8
Recently a discussion about stability and performance of a system involving a high rate of kfree_rcu() calls surfaced on the list [1] which led to another discussion how to prepare for this situation. This patch adds basic batching support for kfree_rcu(). It is "basic" because we do none of the slab management, dynamic allocation, code moving or any of the other things, some of which previous attempts did [2]. These fancier improvements can be follow-up patches and there are different ideas being discussed in those regards. This is an effort to start simple, and build up from there. In the future, an extension to use kfree_bulk and possibly per-slab batching could be done to further improve performance due to cache-locality and slab-specific bulk free optimizations. By using an array of pointers, the worker thread processing the work would need to read lesser data since it does not need to deal with large rcu_head(s) any longer. Torture tests follow in the next patch and show improvements of around 5x reduction in number of grace periods on a 16 CPU system. More details and test data are in that patch. There is an implication with rcu_barrier() with this patch. Since the kfree_rcu() calls can be batched, and may not be handed yet to the RCU machinery in fact, the monitor may not have even run yet to do the queue_rcu_work(), there seems no easy way of implementing rcu_barrier() to wait for those kfree_rcu()s that are already made. So this means a kfree_rcu() followed by an rcu_barrier() does not imply that memory will be freed once rcu_barrier() returns. Another implication is higher active memory usage (although not run-away..) until the kfree_rcu() flooding ends, in comparison to without batching. More details about this are in the second patch which adds an rcuperf test. Finally, in the near future we will get rid of kfree_rcu() special casing within RCU such as in rcu_do_batch and switch everything to just batching. Currently we don't do that since timer subsystem is not yet up and we cannot schedule the kfree_rcu() monitor as the timer subsystem's lock are not initialized. That would also mean getting rid of kfree_call_rcu_nobatch() entirely. [1] http://lore.kernel.org/lkml/[email protected] [2] https://lkml.org/lkml/2017/12/19/824 Cc: [email protected] Cc: [email protected] Co-developed-by: Byungchul Park <[email protected]> Signed-off-by: Byungchul Park <[email protected]> Signed-off-by: Joel Fernandes (Google) <[email protected]> [ paulmck: Applied 0day and Paul Walmsley feedback on ->monitor_todo. ] [ paulmck: Make it work during early boot. ] [ paulmck: Add a crude early boot self-test. ] [ paulmck: Style adjustments and experimental docbook structure header. ] Link: https://lore.kernel.org/lkml/[email protected]/T/#me9956f66cb611b95d26ae92700e1d901f46e8c59 Signed-off-by: Paul E. McKenney <[email protected]>
2020-01-24mptcp: parse and emit MP_CAPABLE option according to v1 specChristoph Paasch2-8/+12
This implements MP_CAPABLE options parsing and writing according to RFC 6824 bis / RFC 8684: MPTCP v1. Local key is sent on syn/ack, and both keys are sent on 3rd ack. MP_CAPABLE messages len are updated accordingly. We need the skbuff to correctly emit the above, so we push the skbuff struct as an argument all the way from tcp code to the relevant mptcp callbacks. When processing incoming MP_CAPABLE + data, build a full blown DSS-like map info, to simplify later processing. On child socket creation, we need to record the remote key, if available. Signed-off-by: Christoph Paasch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-24mptcp: Implement MPTCP receive pathMat Martineau2-0/+18
Parses incoming DSS options and populates outgoing MPTCP ACK fields. MPTCP fields are parsed from the TCP option header and placed in an skb extension, allowing the upper MPTCP layer to access MPTCP options after the skb has gone through the TCP stack. The subflow implements its own data_ready() ops, which ensures that the pending data is in sequence - according to MPTCP seq number - dropping out-of-seq skbs. The DATA_READY bit flag is set if this is the case. This allows the MPTCP socket layer to determine if more data is available without having to consult the individual subflows. It additionally validates the current mapping and propagates EoF events to the connection socket. Co-developed-by: Paolo Abeni <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Co-developed-by: Peter Krystad <[email protected]> Signed-off-by: Peter Krystad <[email protected]> Co-developed-by: Davide Caratti <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Co-developed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Co-developed-by: Florian Westphal <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Christoph Paasch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-24mptcp: Write MPTCP DSS headers to outgoing data packetsMat Martineau1-0/+1
Per-packet metadata required to write the MPTCP DSS option is written to the skb_ext area. One write to the socket may contain more than one packet of data, which is copied to page fragments and mapped in to MPTCP DSS segments with size determined by the available page fragments and the maximum mapping length allowed by the MPTCP specification. If do_tcp_sendpages() splits a DSS segment in to multiple skbs, that's ok - the later skbs can either have duplicated DSS mapping information or none at all, and the receiver can handle that. The current implementation uses the subflow frag cache and tcp sendpages to avoid excessive code duplication. More work is required to ensure that it works correctly under memory pressure and to support MPTCP-level retransmissions. The MPTCP DSS checksum is not yet implemented. Co-developed-by: Paolo Abeni <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Co-developed-by: Peter Krystad <[email protected]> Signed-off-by: Peter Krystad <[email protected]> Co-developed-by: Florian Westphal <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Christoph Paasch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.