aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-10-23drm/tegra: Move drm_dp_link helpers to Tegra DRMThierry Reding1-16/+0
During the discussion of patches that enhance the drm_dp_link helpers it was concluded that these helpers aren't very useful to begin with. After all other drivers have been converted not to use these helpers anymore, move these helpers into the last remaining user: Tegra DRM. If at some point these helpers are deemed more widely useful, they can be moved out into the DRM DP helpers again. Signed-off-by: Thierry Reding <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-23drm/dp: Add helper to get post-cursor adjustmentsThierry Reding1-0/+10
If the transmitter supports pre-emphasis post cursor2 the sink will request adjustments in a similar way to how it requests adjustments to the voltage swing and pre-emphasis settings. Add a helper to extract these adjustments on a per-lane basis from the DPCD link status. Reviewed-by: Philipp Zabel <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-23drm/dp: Add drm_dp_alternate_scrambler_reset_cap() helperThierry Reding1-0/+7
Add a helper to check if the sink supports the eDP alternate scrambler reset value of 0xfffe. Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-23drm/dp: Add drm_dp_channel_coding_supported() helperThierry Reding1-0/+7
Add a helper to check whether the sink supports ANSI 8B/10B channel coding capability as specified in ANSI X3.230-1994, clause 11. Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-23drm/dp: Add drm_dp_fast_training_cap() helperThierry Reding1-0/+7
Add a helper that checks for the fast training capability given the DPCD receiver capabilities blob. Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-23drm/dp: Sort includes alphabeticallyThierry Reding1-2/+2
Keeping the list sorted alphabetically makes it much easier to determine where to add new includes. Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-23Merge drm/drm-next into drm-misc-nextSean Paul44-121/+505
Parroting Daniel's backmerge justification from 2e79e22e092acd55da0b2db066e4826d7d152c41: Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol value") to be able to merge his dp_link patch series. Signed-off-by: Sean Paul <[email protected]>
2019-10-23Revert "drm/omap: add OMAP_BO flags to affect buffer allocation"Sean Paul1-9/+0
This reverts commit 23b482252836ab3c5e6b3b20ed3038449cbc7679. This patch does not have an acceptable open source userspace implementation, and as such it does not meet the requirements for adding new UAPI. Discussion is in the Link. Link: https://lists.freedesktop.org/archives/dri-devel/2019-October/240586.html Fixes: 23b482252836 ("drm/omap: add OMAP_BO flags to affect buffer allocation") Cc: Tomi Valkeinen <[email protected]> Cc: Jean-Jacques Hiblot <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Acked-by: Tomi Valkeinen <[email protected]> Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-23Merge v5.4-rc4 into drm-nextDaniel Vetter31-64/+203
Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol value") to be able to merge his dp_link patch series. Some adjacent changes conflicts, plus some clashes in i915 due to cherry-picking and git trying to be helpful and leaving both versions in. Signed-off-by: Daniel Vetter <[email protected]>
2019-10-22drm/edid: Add drm_hdmi_avi_infoframe_bars()Ville Syrjälä1-0/+4
Add a function to fill the AVI infoframe bar information from the standard tv margin properties. Cc: Eric Anholt <[email protected]> Cc: Boris Brezillon <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Boris Brezillon <[email protected]>
2019-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds12-43/+79
Pull networking fixes from David Miller: "I was battling a cold after some recent trips, so quite a bit piled up meanwhile, sorry about that. Highlights: 1) Fix fd leak in various bpf selftests, from Brian Vazquez. 2) Fix crash in xsk when device doesn't support some methods, from Magnus Karlsson. 3) Fix various leaks and use-after-free in rxrpc, from David Howells. 4) Fix several SKB leaks due to confusion of who owns an SKB and who should release it in the llc code. From Eric Biggers. 5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet. 6) Jumbo packets don't work after resume on r8169, as the BIOS resets the chip into non-jumbo mode during suspend. From Heiner Kallweit. 7) Corrupt L2 header during MPLS push, from Davide Caratti. 8) Prevent possible infinite loop in tc_ctl_action, from Eric Dumazet. 9) Get register bits right in bcmgenet driver, based upon chip version. From Florian Fainelli. 10) Fix mutex problems in microchip DSA driver, from Marek Vasut. 11) Cure race between route lookup and invalidation in ipv4, from Wei Wang. 12) Fix performance regression due to false sharing in 'net' structure, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits) net: reorder 'struct net' fields to avoid false sharing net: dsa: fix switch tree list net: ethernet: dwmac-sun8i: show message only when switching to promisc net: aquantia: add an error handling in aq_nic_set_multicast_list net: netem: correct the parent's backlog when corrupted packet was dropped net: netem: fix error path for corrupted GSO frames macb: propagate errors when getting optional clocks xen/netback: fix error path of xenvif_connect_data() net: hns3: fix mis-counting IRQ vector numbers issue net: usb: lan78xx: Connect PHY before registering MAC vsock/virtio: discard packets if credit is not respected vsock/virtio: send a credit update when buffer size is changed mlxsw: spectrum_trap: Push Ethernet header before reporting trap net: ensure correct skb->tstamp in various fragmenters net: bcmgenet: reset 40nm EPHY on energy detect net: bcmgenet: soft reset 40nm EPHYs before MAC init net: phy: bcm7xxx: define soft_reset for 40nm EPHY net: bcmgenet: don't set phydev->link from MAC net: Update address for MediaTek ethernet driver in MAINTAINERS ipv4: fix race condition between route lookup and invalidation ...
2019-10-19net: reorder 'struct net' fields to avoid false sharingEric Dumazet1-8/+17
Intel test robot reported a ~7% regression on TCP_CRR tests that they bisected to the cited commit. Indeed, every time a new TCP socket is created or deleted, the atomic counter net->count is touched (via get_net(net) and put_net(net) calls) So cpus might have to reload a contended cache line in net_hash_mix(net) calls. We need to reorder 'struct net' fields to move @hash_mix in a read mostly cache line. We move in the first cache line fields that can be dirtied often. We probably will have to address in a followup patch the __randomize_layout that was added in linux-4.13, since this might break our placement choices. Fixes: 355b98553789 ("netns: provide pure entropy for net_hash_mix()") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-18drm/edid: Make drm_get_cea_aspect_ratio() staticVille Syrjälä1-1/+0
drm_get_cea_aspect_ratio() is not used outside drm_edid.c. Make it static. Cc: Wayne Lin <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Uma Shankar <[email protected]>
2019-10-18drm/fourcc: Fix undefined left shift in DRM_FORMAT_BIG_ENDIAN macrosAdam Jackson1-1/+1
1<<31 is undefined because it's a signed int and C is terrible. Reviewed-by: Eric Engestrom <[email protected]> Signed-off-by: Adam Jackson <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-18Merge tag 'sound-5.4-rc4' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few small fixes for the usual suspect, HD- and USB-audio: enablement of runtime PM for Nvidia due to the recent PCI changes, a fix for potential hangs with recent HD-audio platforms, and the rest device-specific quirks" * tag 'sound-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Force runtime PM on Nvidia HDMI codecs ALSA: hda/realtek - Enable headset mic on Asus MJ401TA ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers ALSA: hdac: clear link output stream mapping ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360
2019-10-18drm/syncobj: extend syncobj query ability v3Chunming Zhou1-1/+2
user space needs a flexiable query ability. So that umd can get last signaled or submitted point. v2: add sanitizer checking. v3: rebase Change-Id: I6512b430524ebabe715e602a2bf5abb0a7e780ea Signed-off-by: Chunming Zhou <[email protected]> Cc: Lionel Landwerlin <[email protected]> Cc: Christian König <[email protected]> Reviewed-by: Lionel Landwerlin <[email protected]> Signed-off-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/series/64044/
2019-10-17Merge tag 'arm64-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main thing here is a long-awaited workaround for a CPU erratum on ThunderX2 which we have developed in conjunction with engineers from Cavium/Marvell. At the moment, the workaround is unconditionally enabled for affected CPUs at runtime but we may add a command-line option to disable it in future if performance numbers show up indicating a significant cost for real workloads. Summary: - Work around Cavium/Marvell ThunderX2 erratum #219 - Fix regression in mlock() ABI caused by sign-extension of TTBR1 addresses - More fixes to the spurious kernel fault detection logic - Fix pathological preemption race when enabling some CPU features at boot - Drop broken kcore macros in favour of generic implementations - Fix userspace view of ID_AA64ZFR0_EL1 when SVE is disabled - Avoid NULL dereference on allocation failure during hibernation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: tags: Preserve tags for addresses translated via TTBR1 arm64: mm: fix inverted PAR_EL1.F check arm64: sysreg: fix incorrect definition of SYS_PAR_EL1_F arm64: entry.S: Do not preempt from IRQ before all cpufeatures are enabled arm64: hibernate: check pgd table allocation arm64: cpufeature: Treat ID_AA64ZFR0_EL1 as RAZ when SVE is not enabled arm64: Fix kcore macros after 52-bit virtual addressing fallout arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected arm64: Avoid Cavium TX2 erratum 219 when switching TTBR arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
2019-10-17net: phy: micrel: Update KSZ87xx PHY nameMarek Vasut1-1/+1
The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches. Update the PHY ID and name to reflect that, as this family of switches is commonly refered to as KSZ87xx Signed-off-by: Marek Vasut <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: David S. Miller <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: George McCollister <[email protected]> Cc: Heiner Kallweit <[email protected]> Cc: Sean Nyekjaer <[email protected]> Cc: Tristram Ha <[email protected]> Cc: Woojung Huh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-17Merge branch 'errata/tx2-219' into for-next/fixesWill Deacon13-33/+153
Workaround for Cavium/Marvell ThunderX2 erratum #219. * errata/tx2-219: arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected arm64: Avoid Cavium TX2 erratum 219 when switching TTBR arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
2019-10-17Merge tag 'gpio-v5.4-3' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "The fixes pertain to a problem with initializing the Intel GPIO irqchips when adding gpiochips. Andy fixed it up elegantly by adding a hardware initialization callback to the struct gpio_irq_chip so let's use this. Tested and verified on the target hardware" * tag 'gpio-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: lynxpoint: set default handler to be handle_bad_irq() gpio: merrifield: Move hardware initialization to callback gpio: lynxpoint: Move hardware initialization to callback gpio: intel-mid: Move hardware initialization to callback gpiolib: Initialize the hardware with a callback gpio: merrifield: Restore use of irq_base
2019-10-17drm/vram: drop DRM_VRAM_MM_FILE_OPERATIONSGerd Hoffmann1-18/+0
Not needed any more because we don't have vram specific fops any more. DEFINE_DRM_GEM_FOPS() can be used instead. Signed-off-by: Gerd Hoffmann <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-17drm/vram: switch vram helper to &drm_gem_object_funcs.mmap()Gerd Hoffmann1-8/+1
Wire up the new drm_gem_ttm_mmap() helper function, use generic drm_gem_mmap for &fops.mmap and delete dead drm_vram_mm_file_operations_mmap(). Signed-off-by: Gerd Hoffmann <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-17drm/ttm: add drm_gem_ttm_mmap()Gerd Hoffmann1-0/+2
Add helper function to mmap ttm bo's using &drm_gem_object_funcs.mmap(). Note that with this code path access verification is done by drm_gem_mmap() (which calls drm_vma_node_is_allowed(()). The &ttm_bo_driver.verify_access() callback is is not used. v3: use ttm_bo_mmap_obj instead of ttm_bo_mmap_vma_setup Signed-off-by: Gerd Hoffmann <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-17drm/ttm: rename ttm_fbdev_mmapGerd Hoffmann1-6/+4
Rename ttm_fbdev_mmap to ttm_bo_mmap_obj. Move the vm_pgoff sanity check to amdgpu_bo_fbdev_mmap (only ttm_fbdev_mmap user in tree). The ttm_bo_mmap_obj function can now be used to map any buffer object. This allows to implement &drm_gem_object_funcs.mmap in gem ttm helpers. v3: patch added to series Signed-off-by: Gerd Hoffmann <[email protected]> Acked-by: Thomas Zimmermann <[email protected]> Reviewed-by: Christian König <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-17drm/shmem: drop DEFINE_DRM_GEM_SHMEM_FOPSGerd Hoffmann1-26/+0
DEFINE_DRM_GEM_SHMEM_FOPS is identical to DEFINE_DRM_GEM_FOPS now, drop it. Signed-off-by: Gerd Hoffmann <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-17drm/shmem: switch shmem helper to &drm_gem_object_funcs.mmapGerd Hoffmann1-4/+2
Switch gem shmem helper to the new mmap() workflow, from &gem_driver.fops.mmap to &drm_gem_object_funcs.mmap. v2: Fix vm_flags and vm_page_prot handling. Signed-off-by: Gerd Hoffmann <[email protected]> Reviewed-by: Steven Price <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-17drm: add mmap() to drm_gem_object_funcsGerd Hoffmann1-0/+14
drm_gem_object_funcs->vm_ops alone can't handle everything which needs to be done for mmap(), tweaking vm_flags for example. So add a new mmap() callback to drm_gem_object_funcs where this code can go to. Note that the vm_ops field is not used in case the mmap callback is present, it is expected that the callback sets vma->vm_ops instead. Also setting vm_flags and vm_page_prot is the job of the new callback. so drivers have more control over these flags. drm_gem_mmap_obj() will use the new callback for object specific mmap setup. With this in place the need for driver-speific fops->mmap callbacks goes away, drm_gem_mmap can be hooked instead. drm_gem_prime_mmap() will use the new callback too to just mmap gem objects directly instead of jumping though loops to make drm_gem_object_lookup() and fops->mmap work. Signed-off-by: Gerd Hoffmann <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-16arm64: entry.S: Do not preempt from IRQ before all cpufeatures are enabledJulien Thierry1-0/+1
Preempting from IRQ-return means that the task has its PSTATE saved on the stack, which will get restored when the task is resumed and does the actual IRQ return. However, enabling some CPU features requires modifying the PSTATE. This means that, if a task was scheduled out during an IRQ-return before all CPU features are enabled, the task might restore a PSTATE that does not include the feature enablement changes once scheduled back in. * Task 1: PAN == 0 ---| |--------------- | |<- return from IRQ, PSTATE.PAN = 0 | <- IRQ | +--------+ <- preempt() +-- ^ | reschedule Task 1, PSTATE.PAN == 1 * Init: --------------------+------------------------ ^ | enable_cpu_features set PSTATE.PAN on all CPUs Worse than this, since PSTATE is untouched when task switching is done, a task missing the new bits in PSTATE might affect another task, if both do direct calls to schedule() (outside of IRQ/exception contexts). Fix this by preventing preemption on IRQ-return until features are enabled on all CPUs. This way the only PSTATE values that are saved on the stack are from synchronous exceptions. These are expected to be fatal this early, the exception is BRK for WARN_ON(), but as this uses do_debug_exception() which keeps IRQs masked, it shouldn't call schedule(). Signed-off-by: Julien Thierry <[email protected]> [james: Replaced a really cool hack, with an even simpler static key in C. expanded commit message with Julien's cover-letter ascii art] Signed-off-by: James Morse <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-10-15net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actionsDavide Caratti1-2/+3
the following script: # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress protocol ip matchall \ > action mpls push protocol mpls_uc label 0x355aa bos 1 causes corruption of all IP packets transmitted by eth0. On TC egress, we can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push' operation will result in an overwrite of the first 4 octets in the packet L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same error pattern is present also in the MPLS 'pop' operation. Fix this error in act_mpls data plane, computing 'mac_len' as the difference between the network header and the mac header (when not at TC ingress), and use it in MPLS 'push'/'pop' core functions. v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len' in skb_mpls_pop(), reported by kbuild test robot CC: Lorenzo Bianconi <[email protected]> Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC") Reviewed-by: Simon Horman <[email protected]> Acked-by: John Hurley <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-15Merge tag 'scsi-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS (qla2xxx) and two in the core. The last two are mostly about removing incorrect messages from the kernel log: the resid message is definitely wrong and the sync cache on protected drive problem is arguably wrong" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Update qla2xxx driver scsi: zfcp: fix reaction on bit error threshold notification scsi: core: save/restore command resid for error handling scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry() scsi: sd: Ignore a failure to sync cache due to lack of authorization
2019-10-15drm: Add LT-tunable PHY repeater mode operationsRodrigo Siqueira1-0/+4
LT-tunable PHY Repeaters can operate in two different modes: transparent (default) and non-transparent. The value 0x55 specifies the transparent mode, and 0xaa represents the non-transparent; this commit adds these two values as definitions. Cc: Abdoulaye Berthe <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Leo Li <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Manasi Navare <[email protected]> Cc: Ville Syrjälä <[email protected]> Signed-off-by: Abdoulaye Berthe <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-15Merge drm/drm-next into drm-intel-next-queuedJoonas Lahtinen691-8133/+17368
Backmerging to pull in HDR DP code: https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html Signed-off-by: Joonas Lahtinen <[email protected]>
2019-10-15gpiolib: Initialize the hardware with a callbackAndy Shevchenko1-0/+8
After changing the drivers to use GPIO core to add an IRQ chip it appears that some of them requires a hardware initialization before adding the IRQ chip. Add an optional callback ->init_hw() to allow that drivers to initialize hardware if needed. This change is a part of the fix NULL pointer dereference brought to the several drivers recently. Cc: Hans de Goede <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2019-10-14xarray.h: fix kernel-doc warningRandy Dunlap1-2/+2
Fix (Sphinx) kernel-doc warning in <linux/xarray.h>: include/linux/xarray.h:232: WARNING: Unexpected indentation. Link: http://lkml.kernel.org/r/[email protected] Fixes: a3e4d3f97ec8 ("XArray: Redesign xa_alloc API") Signed-off-by: Randy Dunlap <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-10-14bitmap.h: fix kernel-doc warning and typoRandy Dunlap1-1/+2
Fix kernel-doc warning in <linux/bitmap.h>: include/linux/bitmap.h:341: warning: Function parameter or member 'nbits' not described in 'bitmap_or_equal' Also fix small typo (bitnaps). Link: http://lkml.kernel.org/r/[email protected] Fixes: b9fa6442f704 ("cpumask: Implement cpumask_or_equal()") Signed-off-by: Randy Dunlap <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-10-14mm, page_owner: rename flag indicating that page is allocatedVlastimil Babka1-1/+1
Commit 37389167a281 ("mm, page_owner: keep owner info when freeing the page") has introduced a flag PAGE_EXT_OWNER_ACTIVE to indicate that page is tracked as being allocated. Kirril suggested naming it PAGE_EXT_OWNER_ALLOCATED to make it more clear, as "active is somewhat loaded term for a page". Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Vlastimil Babka <[email protected]> Suggested-by: Kirill A. Shutemov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Walter Wu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-10-14mm, page_owner: fix off-by-one error in __set_page_owner_handle()Vlastimil Babka1-0/+8
Patch series "followups to debug_pagealloc improvements through page_owner", v3. These are followups to [1] which made it to Linus meanwhile. Patches 1 and 3 are based on Kirill's review, patch 2 on KASAN request [2]. It would be nice if all of this made it to 5.4 with [1] already there (or at least Patch 1). This patch (of 3): As noted by Kirill, commit 7e2f2a0cd17c ("mm, page_owner: record page owner for each subpage") has introduced an off-by-one error in __set_page_owner_handle() when looking up page_ext for subpages. As a result, the head page page_owner info is set twice, while for the last tail page, it's not set at all. Fix this and also make the code more efficient by advancing the page_ext pointer we already have, instead of calling lookup_page_ext() for each subpage. Since the full size of struct page_ext is not known at compile time, we can't use a simple page_ext++ statement, so introduce a page_ext_next() inline function for that. Link: http://lkml.kernel.org/r/[email protected] Fixes: 7e2f2a0cd17c ("mm, page_owner: record page owner for each subpage") Signed-off-by: Vlastimil Babka <[email protected]> Reported-by: Kirill A. Shutemov <[email protected]> Reported-by: Miles Chen <[email protected]> Acked-by: Kirill A. Shutemov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Walter Wu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-10-14drm/i915/perf: allow holding preemption on filtered ctxLionel Landwerlin1-0/+11
We would like to make use of perf in Vulkan. The Vulkan API is much lower level than OpenGL, with applications directly exposed to the concept of command buffers (pretty much equivalent to our batch buffers). In Vulkan, queries are always limited in scope to a command buffer. In OpenGL, the lack of command buffer concept meant that queries' duration could span multiple command buffers. With that restriction gone in Vulkan, we would like to simplify measuring performance just by measuring the deltas between the counter snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the more complex scheme we currently have in the GL driver, using 2 MI_RECORD_PERF_COUNT commands and doing some post processing on the stream of OA reports, coming from the global OA buffer, to remove any unrelated deltas in between the 2 MI_RECORD_PERF_COUNT. Disabling preemption only apply to a single context with which want to query performance counters for and is considered a privileged operation, by default protected by CAP_SYS_ADMIN. It is possible to enable it for a normal user by disabling the paranoid stream setting. v2: Store preemption setting in intel_context (Chris) v3: Use priorities to avoid preemption rather than the HW mechanism v4: Just modify the port priority reporting function v5: Add nopreempt flag on gem context and always flag requests appropriately, regarless of OA reconfiguration. Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932 Signed-off-by: Lionel Landwerlin <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-14drm/i915/perf: Allow dynamic reconfiguration of the OA streamChris Wilson1-0/+13
Introduce a new perf_ioctl command to change the OA configuration of the active stream. This allows the OA stream to be reconfigured between batch buffers, giving greater flexibility in sampling. We inject a request into the OA context to reconfigure the stream asynchronously on the GPU in between and ordered with execbuffer calls. Original patch for dynamic reconfiguration by Lionel Landwerlin. Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932 Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Lionel Landwerlin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-14drm/i915: add support for perf configuration queriesLionel Landwerlin1-1/+61
Listing configurations at the moment is supported only through sysfs. This might cause issues for applications wanting to list configurations from a container where sysfs isn't available. This change adds a way to query the number of configurations and their content through the i915 query uAPI. v2: Fix sparse warnings (Lionel) Add support to query configuration using uuid (Lionel) v3: Fix some inconsistency in uapi header (Lionel) Fix unlocking when not locked issue (Lionel) Add debug messages (Lionel) v4: Fix missing unlock (Dan) v5: Drop lock when copying config content to userspace (Chris) v6: Drop lock when copying config list to userspace (Chris) Fix deadlock when calling i915_perf_get_oa_config() under perf.metrics_lock (Lionel) Add i915_oa_config_get() (Chris) Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932 Signed-off-by: Lionel Landwerlin <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-14drm/i915/perf: introduce a versioning of the i915-perf uapiLionel Landwerlin1-0/+21
Reporting this version will help application figure out what level of the support the running kernel provides. v2: Add i915_perf_ioctl_version() (Chris) Signed-off-by: Lionel Landwerlin <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-10-13tcp: annotate sk->sk_wmem_queued lockless readsEric Dumazet2-6/+11
For the sake of tcp_poll(), there are few places where we fetch sk->sk_wmem_queued while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. sk_wmem_queued_add() helper is added so that we can in the future convert to ADD_ONCE() or equivalent if/when available. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-13tcp: annotate sk->sk_sndbuf lockless readsEric Dumazet1-7/+11
For the sake of tcp_poll(), there are few places where we fetch sk->sk_sndbuf while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that other transports probably need similar fixes. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-13tcp: annotate sk->sk_rcvbuf lockless readsEric Dumazet2-3/+3
For the sake of tcp_poll(), there are few places where we fetch sk->sk_rcvbuf while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that other transports probably need similar fixes. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-13tcp: annotate tp->snd_nxt lockless readsEric Dumazet1-1/+2
There are few places where we fetch tp->snd_nxt while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-13tcp: annotate tp->write_seq lockless readsEric Dumazet1-1/+1
There are few places where we fetch tp->write_seq while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-13tcp: add rcu protection around tp->fastopen_rskEric Dumazet1-3/+3
Both tcp_v4_err() and tcp_v6_err() do the following operations while they do not own the socket lock : fastopen = tp->fastopen_rsk; snd_una = fastopen ? tcp_rsk(fastopen)->snt_isn : tp->snd_una; The problem is that without appropriate barrier, the compiler might reload tp->fastopen_rsk and trigger a NULL deref. request sockets are protected by RCU, we can simply add the missing annotations and barriers to solve the issue. Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-13Merge tag 'hwmon-for-v5.4-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Update/fix inspur-ipsps1 and k10temp Documentation - Fix nct7904 driver - Fix HWMON_P_MIN_ALARM mask in hwmon core * tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: docs: Extend inspur-ipsps1 title underline hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct. docs: hwmon: Include 'inspur-ipsps1.rst' into docs hwmon: Fix HWMON_P_MIN_ALARM mask hwmon: (k10temp) Update documentation and add temp2_input info hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
2019-10-12Merge tag 'tty-5.4-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.4-rc3 that resolve a number of reported issues and regressions. None of these are huge, full details are in the shortlog. There's also a MAINTAINERS update that I think you might have already taken in your tree already, but git should handle that merge easily. All have been in linux-next with no reported issues" * tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb tty: serial: imx: Use platform_get_irq_optional() for optional IRQs serial: fix kernel-doc warning in comments serial: 8250_omap: Fix gpio check for auto RTS/CTS serial: mctrl_gpio: Check for NULL pointer tty: serial: fsl_lpuart: Fix lpuart_flush_buffer() tty: serial: Fix PORT_LINFLEXUART definition tty: n_hdlc: fix build on SPARC serial: uartps: Fix uartps_major handling serial: uartlite: fix exit path null pointer tty: serial: linflexuart: Fix magic SysRq handling serial: sh-sci: Use platform_get_irq_optional() for optional interrupts dt-bindings: serial: sh-sci: Document r8a774b1 bindings serial/sifive: select SERIAL_EARLYCON tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()' tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
2019-10-12Merge tag 'usb-5.4-rc3' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a lot of small USB driver fixes for 5.4-rc3. syzbot has stepped up its testing of the USB driver stack, now able to trigger fun race conditions between disconnect and probe functions. Because of that we have a lot of fixes in here from Johan and others fixing these reported issues that have been around since almost all time. We also are just deleting the rio500 driver, making all of the syzbot bugs found in it moot as it turns out no one has been using it for years as there is a userspace version that is being used instead. There are also a number of other small fixes in here, all resolving reported issues or regressions. All have been in linux-next without any reported issues" * tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits) USB: yurex: fix NULL-derefs on disconnect USB: iowarrior: use pr_err() USB: iowarrior: drop redundant iowarrior mutex USB: iowarrior: drop redundant disconnect mutex USB: iowarrior: fix use-after-free after driver unbind USB: iowarrior: fix use-after-free on release USB: iowarrior: fix use-after-free on disconnect USB: chaoskey: fix use-after-free on release USB: adutux: fix use-after-free on release USB: ldusb: fix NULL-derefs on driver unbind USB: legousbtower: fix use-after-free on release usb: cdns3: Fix for incorrect DMA mask. usb: cdns3: fix cdns3_core_init_role() usb: cdns3: gadget: Fix full-speed mode USB: usb-skeleton: drop redundant in-urb check USB: usb-skeleton: fix use-after-free after driver unbind USB: usb-skeleton: fix NULL-deref on disconnect usb:cdns3: Fix for CV CH9 running with g_zero driver. usb: dwc3: Remove dev_err() on platform_get_irq() failure usb: dwc3: Switch to platform_get_irq_byname_optional() ...
Powered by cgit, Gruvboxed by Blaster4385.