| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
On arm64, building with CONFIG_KASAN_HW_TAGS now causes a compile-time
error:
mm/kasan/report.c: In function 'kasan_non_canonical_hook':
mm/kasan/report.c:637:20: error: 'KASAN_SHADOW_OFFSET' undeclared (first use in this function)
637 | if (addr < KASAN_SHADOW_OFFSET)
| ^~~~~~~~~~~~~~~~~~~
mm/kasan/report.c:637:20: note: each undeclared identifier is reported only once for each function it appears in
mm/kasan/report.c:640:77: error: expected expression before ';' token
640 | orig_addr = (addr - KASAN_SHADOW_OFFSET) << KASAN_SHADOW_SCALE_SHIFT;
This was caused by removing the dependency on CONFIG_KASAN_INLINE that
used to prevent this from happening. Use the more specific dependency
on KASAN_SW_TAGS || KASAN_GENERIC to only ignore the function for hwasan
mode.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 12ec6a919b0f ("kasan: print the original fault addr when access invalid shadow")
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Haibo Li <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: AngeloGioacchino Del Regno <[email protected]>
Cc: Matthias Brugger <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
when the checked address is illegal,the corresponding shadow address from
kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow
address causes kernel oops. Here is a sample about oops on arm64(VA
39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on:
[ffffffb80aaaaaaa] pgd=000000005d3ce003, p4d=000000005d3ce003,
pud=000000005d3ce003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __hwasan_load8_noabort+0x5c/0x90
lr : do_ib_ob+0xf4/0x110
ffffffb80aaaaaaa is the shadow address for efffff80aaaaaaaa.
The problem is reading invalid shadow in kasan_check_range.
The generic kasan also has similar oops.
It only reports the shadow address which causes oops but not
the original address.
Commit 2f004eea0fc8("x86/kasan: Print original address on #GP")
introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE.
This patch extends it to KASAN_OUTLINE mode.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 2f004eea0fc8("x86/kasan: Print original address on #GP")
Signed-off-by: Haibo Li <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: AngeloGioacchino Del Regno <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Haibo Li <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Kees Cook <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by pulling the locking from __unmap_hugepage_final_range
into helper functions called from zap_page_range_single. This ensures
page faults stay locked out of the MADV_DONTNEED VMA until the huge pages
have actually been freed.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Extend the locking scheme used to protect shared hugetlb mappings from
truncate vs page fault races, in order to protect private hugetlb mappings
(with resv_map) against MADV_DONTNEED.
Add a read-write semaphore to the resv_map data structure, and use that
from the hugetlb_vma_(un)lock_* functions, in preparation for closing the
race between MADV_DONTNEED and page faults.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.7
This introduces partial support for the Qualcomm Secure Execution
Environment SCM interface, and uses this to implement EFI variable
access on the Windows On Snapdragon devices (for now).
The 32/64-bit calling convention detector of the SCM interface is
updated to not choose 64-bit convention when Linux is 32-bit. The
"extern" specifier is dropped from the interface include file.
The LLCC driver gains support for carrying configuration for multiple
different system/DDR configurations for a given platform, and selecting
between them. Support for Q[DR]U1000 is added to the driver.
All exported symbols are transitioned to EXPORT_SYMBOL_GPL().
The platform_drivers in the Qualcomm SoC are transitioned to the
void-returning remove_new implementation.
The rmtfs memory driver gains support for leaving guard pages around the
used area, to avoid issues if the allocation happens to be placed
adjacent to another protected memory region.
The socinfo driver gains knowledge about IPQ8174, QCM6490, SM7150P and
various PMICs used together with SM8550.
* tag 'qcom-drivers-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (44 commits)
soc: qcom: socinfo: Convert to platform remove callback returning void
soc: qcom: smsm: Convert to platform remove callback returning void
soc: qcom: smp2p: Convert to platform remove callback returning void
soc: qcom: smem: Convert to platform remove callback returning void
soc: qcom: rmtfs_mem: Convert to platform remove callback returning void
soc: qcom: qcom_stats: Convert to platform remove callback returning void
soc: qcom: qcom_gsbi: Convert to platform remove callback returning void
soc: qcom: qcom_aoss: Convert to platform remove callback returning void
soc: qcom: pmic_glink: Convert to platform remove callback returning void
soc: qcom: ocmem: Convert to platform remove callback returning void
soc: qcom: llcc-qcom: Convert to platform remove callback returning void
soc: qcom: icc-bwmon: Convert to platform remove callback returning void
firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit
soc: qcom: llcc: Handle a second device without data corruption
soc: qcom: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: smem: Annotate struct qcom_smem with __counted_by
soc: qcom: rmtfs: Support discarding guard pages
dt-bindings: reserved-memory: rmtfs: Allow guard pages
dt-bindings: firmware: qcom,scm: document IPQ5018 compatible
firmware: qcom_scm: disable SDI if required
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
This patch will remove freelist.h from kernel source tree, since the
only use cases (kretprobe and rethook) are converted to objpool.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: wuqiang.matt <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
kretprobe is using freelist to manage return-instances, but freelist,
as LIFO queue based on singly linked list, scales badly and reduces
the overall throughput of kretprobed routines, especially for high
contention scenarios.
Here's a typical throughput test of sys_prctl (counts in 10 seconds,
measured with perf stat -a -I 10000 -e syscalls:sys_enter_prctl):
OS: Debian 10 X86_64, Linux 6.5rc7 with freelist
HW: XEON 8336C x 2, 64 cores/128 threads, DDR4 3200MT/s
1T 2T 4T 8T 16T 24T
24150045 29317964 15446741 12494489 18287272 17708768
32T 48T 64T 72T 96T 128T
16200682 13737658 11645677 11269858 10470118 9931051
This patch introduces objpool to replace freelist. objpool is a
high performance queue, which can bring near-linear scalability
to kretprobed routines. Tests of kretprobe throughput show the
biggest ratio as 159x of original freelist. Here's the result:
1T 2T 4T 8T 16T
native: 41186213 82336866 164250978 328662645 658810299
freelist: 24150045 29317964 15446741 12494489 18287272
objpool: 23926730 48010314 96125218 191782984 385091769
32T 48T 64T 96T 128T
native: 1330338351 1969957941 2512291791 2615754135 2671040914
freelist: 16200682 13737658 11645677 10470118 9931051
objpool: 764481096 1147149781 1456220214 1502109662 1579015050
Testings on 96-core ARM64 output similarly, but with the biggest
ratio up to 448x:
OS: Debian 10 AARCH64, Linux 6.5rc7
HW: Kunpeng-920 96 cores/2 sockets/4 NUMA nodes, DDR4 2933 MT/s
1T 2T 4T 8T 16T
native: . 30066096 63569843 126194076 257447289 505800181
freelist: 16152090 11064397 11124068 7215768 5663013
objpool: 13997541 28032100 55726624 110099926 221498787
24T 32T 48T 64T 96T
native: 763305277 1015925192 1521075123 2033009392 3021013752
freelist: 5015810 4602893 3766792 3382478 2945292
objpool: 328192025 439439564 668534502 887401381 1319972072
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: wuqiang.matt <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
objpool is a scalable implementation of high performance queue for
object allocation and reclamation, such as kretprobe instances.
With leveraging percpu ring-array to mitigate hot spots of memory
contention, it delivers near-linear scalability for high parallel
scenarios. The objpool is best suited for the following cases:
1) Memory allocation or reclamation are prohibited or too expensive
2) Consumers are of different priorities, such as irqs and threads
Limitations:
1) Maximum objects (capacity) is fixed after objpool creation
2) All pre-allocated objects are managed in percpu ring array,
which consumes more memory than linked lists
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: wuqiang.matt <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
Rename these two fields to discourage direct access (and to help ensure
that we mop up any leftover direct accesses).
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Recently, we converted the ctime accesses in the kernel to use new
accessor functions. Linus recently pointed out though that if we add
accessors for the atime and mtime, then that would allow us to
seamlessly change how these timestamps are stored in the inode.
Add new accessor functions for the atime and mtime that mirror the
accessors for the ctime.
Signed-off-by: Jeff Layton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
When CONFIG_IPV6=n, and building with W=1:
In file included from include/trace/define_trace.h:102,
from include/trace/events/neigh.h:255,
from net/core/net-traces.c:51:
include/trace/events/neigh.h: In function ‘trace_event_raw_event_neigh_create’:
include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
42 | struct in6_addr *pin6;
| ^~~~
include/trace/trace_events.h:402:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
402 | { assign; } \
| ^~~~~~
include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
44 | PARAMS(assign), \
| ^~~~~~
include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
23 | TRACE_EVENT(neigh_create,
| ^~~~~~~~~~~
include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
41 | TP_fast_assign(
| ^~~~~~~~~~~~~~
In file included from include/trace/define_trace.h:103,
from include/trace/events/neigh.h:255,
from net/core/net-traces.c:51:
include/trace/events/neigh.h: In function ‘perf_trace_neigh_create’:
include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
42 | struct in6_addr *pin6;
| ^~~~
include/trace/perf.h:51:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
51 | { assign; } \
| ^~~~~~
include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
44 | PARAMS(assign), \
| ^~~~~~
include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
23 | TRACE_EVENT(neigh_create,
| ^~~~~~~~~~~
include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
41 | TP_fast_assign(
| ^~~~~~~~~~~~~~
Indeed, the variable pin6 is declared and initialized unconditionally,
while it is only used and needlessly re-initialized when support for
IPv6 is enabled.
Fix this by dropping the unused variable initialization, and moving the
variable declaration inside the existing section protected by a check
for CONFIG_IPV6.
Fixes: fc651001d2c5ca4f ("neighbor: Add tracepoint to __neigh_create")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Simon Horman <[email protected]> # build-tested
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter next pull request 2023-10-18
This series contains initial netfilter skb drop_reason support, from
myself.
First few patches fix up a few spots to make sure we won't trip
when followup patches embed error numbers in the upper bits
(we already do this in some places).
Then, nftables and bridge netfilter get converted to call kfree_skb_reason
directly to let tooling pinpoint exact location of packet drops,
rather than the existing NF_DROP catchall in nf_hook_slow().
I would like to eventually convert all netfilter modules, but as some
callers cannot deal with NF_STOLEN (notably act_ct), more preparation
work is needed for this.
Last patch gets rid of an ugly 'de-const' cast in nftables.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
All callers of work_on_cpu() share the same lock class key for all the
functions queued. As a result the workqueue related locking scenario for
a function A may be spuriously accounted as an inversion against the
locking scenario of function B such as in the following model:
long A(void *arg)
{
mutex_lock(&mutex);
mutex_unlock(&mutex);
}
long B(void *arg)
{
}
void launchA(void)
{
work_on_cpu(0, A, NULL);
}
void launchB(void)
{
mutex_lock(&mutex);
work_on_cpu(1, B, NULL);
mutex_unlock(&mutex);
}
launchA and launchB running concurrently have no chance to deadlock.
However the above can be reported by lockdep as a possible locking
inversion because the works containing A() and B() are treated as
belonging to the same locking class.
The following shows an existing example of such a spurious lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.6.0-rc1-00065-g934ebd6e5359 #35409 Not tainted
------------------------------------------------------
kworker/0:1/9 is trying to acquire lock:
ffffffff9bc72f30 (cpu_hotplug_lock){++++}-{0:0}, at: _cpu_down+0x57/0x2b0
but task is already holding lock:
ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
__flush_work+0x83/0x4e0
work_on_cpu+0x97/0xc0
rcu_nocb_cpu_offload+0x62/0xb0
rcu_nocb_toggle+0xd0/0x1d0
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
-> #1 (rcu_state.barrier_mutex){+.+.}-{3:3}:
__mutex_lock+0x81/0xc80
rcu_nocb_cpu_deoffload+0x38/0xb0
rcu_nocb_toggle+0x144/0x1d0
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
__lock_acquire+0x1538/0x2500
lock_acquire+0xbf/0x2a0
percpu_down_write+0x31/0x200
_cpu_down+0x57/0x2b0
__cpu_down_maps_locked+0x10/0x20
work_for_cpu_fn+0x15/0x20
process_scheduled_works+0x2a7/0x500
worker_thread+0x173/0x330
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock --> rcu_state.barrier_mutex --> (work_completion)(&wfc.work)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&wfc.work));
lock(rcu_state.barrier_mutex);
lock((work_completion)(&wfc.work));
lock(cpu_hotplug_lock);
*** DEADLOCK ***
2 locks held by kworker/0:1/9:
#0: ffff900481068b38 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x212/0x500
#1: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500
stack backtrace:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1-00065-g934ebd6e5359 #35409
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: events work_for_cpu_fn
Call Trace:
rcu-torture: rcu_torture_read_exit: Start of episode
<TASK>
dump_stack_lvl+0x4a/0x80
check_noncircular+0x132/0x150
__lock_acquire+0x1538/0x2500
lock_acquire+0xbf/0x2a0
? _cpu_down+0x57/0x2b0
percpu_down_write+0x31/0x200
? _cpu_down+0x57/0x2b0
_cpu_down+0x57/0x2b0
__cpu_down_maps_locked+0x10/0x20
work_for_cpu_fn+0x15/0x20
process_scheduled_works+0x2a7/0x500
worker_thread+0x173/0x330
? __pfx_worker_thread+0x10/0x10
kthread+0xe6/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK
Fix this with providing one lock class key per work_on_cpu() caller.
Reported-and-tested-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
The need to map Ethtool forced speeds to Ethtool supported link modes is
common among drivers. To support this, add a common structure for forced
speed maps and a function to init them. This is solution was originally
introduced in commit 1d4e4ecccb11 ("qede: populate supported link modes
maps on module init") for qede driver.
ethtool_forced_speed_maps_init() should be called during driver init
with an array of struct ethtool_forced_speed_map to populate the mapping.
Definitions for maps themselves are left in the driver code, as the sets
of supported link modes may vary between the devices.
Suggested-by: Andrew Lunn <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Pawel Chmielewski <[email protected]>
Signed-off-by: Paul Greenwalt <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The set backend using this already has to work around this via ugly
cast, don't spread this pattern.
Signed-off-by: Florian Westphal <[email protected]>
|
|
net_dropmonitor blames core.c:nf_hook_slow.
Add NF_DROP_REASON() helper and use it in nft_do_chain().
The helper releases the skb, so exact drop location becomes
available. Calling code will observe the NF_STOLEN verdict
instead.
Adjust nf_hook_slow so we can embed an erro value wih
NF_STOLEN verdicts, just like we do for NF_DROP.
After this, drop in nftables can be pinpointed to a drop due
to a rule or the chain policy.
Signed-off-by: Florian Westphal <[email protected]>
|
|
Make the net pointer stored in possible_net_t structure annotated as
an RCU pointer. Change the access helpers to treat it as such.
Introduce read_pnet_rcu() helper to allow caller to dereference
the net pointer under RCU read lock.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.7-2023-10-13:
amdgpu:
- DC replay fixes
- Misc code cleanups and spelling fixes
- Documentation updates
- RAS EEPROM Updates
- FRU EEPROM Updates
- IP discovery updates
- SR-IOV fixes
- RAS updates
- DC PQ fixes
- SMU 13.0.6 updates
- GC 11.5 Support
- NBIO 7.11 Support
- GMC 11 Updates
- Reset fixes
- SMU 11.5 Updates
- SMU 13.0 OD support
- Use flexible arrays for bo list handling
- W=1 Fixes
- SubVP fixes
- DPIA fixes
- DCN 3.5 Support
- Devcoredump fixes
- VPE 6.1 support
- VCN 4.0 Updates
- S/G display fixes
- DML fixes
- DML2 Support
- MST fixes
- VRR fixes
- Enable seamless boot in more cases
- Enable content type property for HDMI
- OLED fixes
- Rework and clean up GPUVM TLB flushing
- DC ODM fixes
- DP 2.x fixes
- AGP aperture fixes
- SDMA firmware loading cleanups
- Cyan Skillfish GPU clock counter fix
- GC 11 GART fix
- Cache GPU fault info for userspace queries
- DC cursor check fixes
- eDP fixes
- DC FP handling fixes
- Variable sized array fixes
- SMU 13.0.x fixes
- IB start and size alignment fixes for VCN
- SMU 14 Support
- Suspend and resume sequence rework
- vkms fix
amdkfd:
- GC 11 fixes
- GC 10 fixes
- Doorbell fixes
- CWSR fixes
- SVM fixes
- Clean up GC info enumeration
- Rework memory limit handling
- Coherent memory handling fixes
- Use partial migrations in GPU faults
- TLB flush fixes
- DMA unmap fixes
- GC 9.4.3 fixes
- SQ interrupt fix
- GTT mapping fix
- GC 11.5 Support
radeon:
- Misc code cleanups
- W=1 Fixes
- Fix possible buffer overflow
- Fix possible NULL pointer dereference
UAPI:
- Add EXT_COHERENT memory allocation flags. These allow for system scope atomics.
Proposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88
- Add support for new VPE engine. This is a memory to memory copy engine with advanced scaling, CSC, and color management features
Proposed mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25713
- Add INFO IOCTL interface to query GPU faults
Proposed Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23238
Proposed libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/298
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-10-10
1) Adham Faris, Increase max supported channels number to 256
2) Leon Romanovsky, Allow IPsec soft/hard limits in bytes
3) Shay Drory, Replace global mlx5_intf_lock with
HCA devcom component lock
4) Wei Zhang, Optimize SF creation flow
During SF creation, HCA state gets changed from INVALID to
IN_USE step by step. Accordingly, FW sends vhca event to
driver to inform about this state change asynchronously.
Each vhca event is critical because all related SW/FW
operations are triggered by it.
Currently there is only a single mlx5 general event handler
which not only handles vhca event but many other events.
This incurs huge bottleneck because all events are forced
to be handled in serial manner.
Moreover, all SFs share same table_lock which inevitably
impacts each other when they are created in parallel.
This series will solve this issue by:
1. A dedicated vhca event handler is introduced to eliminate
the mutual impact with other mlx5 events.
2. Max FW threads work queues are employed in the vhca event
handler to fully utilize FW capability.
3. Redesign SF active work logic to completely remove
table_lock.
With above optimization, SF creation time is reduced by 25%,
i.e. from 80s to 60s when creating 100 SFs.
Patches summary:
Patch 1 - implement dedicated vhca event handler with max FW
cmd threads of work queues.
Patch 2 - remove table_lock by redesigning SF active work
logic.
* tag 'mlx5-updates-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Allow IPsec soft/hard limits in bytes
net/mlx5e: Increase max supported channels number to 256
net/mlx5e: Preparations for supporting larger number of channels
net/mlx5e: Refactor mlx5e_rss_init() and mlx5e_rss_free() API's
net/mlx5e: Refactor mlx5e_rss_set_rxfh() and mlx5e_rss_get_rxfh()
net/mlx5e: Refactor rx_res_init() and rx_res_free() APIs
net/mlx5e: Use PTR_ERR_OR_ZERO() to simplify code
net/mlx5: Use PTR_ERR_OR_ZERO() to simplify code
net/mlx5: fix config name in Kconfig parameter documentation
net/mlx5: Remove unused declaration
net/mlx5: Replace global mlx5_intf_lock with HCA devcom component lock
net/mlx5: Refactor LAG peer device lookout bus logic to mlx5 devcom
net/mlx5: Avoid false positive lockdep warning by adding lock_class_key
net/mlx5: Redesign SF active work to remove table_lock
net/mlx5: Parallelize vhca event handling
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2023-10-17
1) Fix a slab-use-after-free in xfrm_policy_inexact_list_reinsert.
From Dong Chenchen.
2) Fix data-races in the xfrm interfaces dev->stats fields.
From Eric Dumazet.
3) Fix a data-race in xfrm_gen_index.
From Eric Dumazet.
4) Fix an inet6_dev refcount underflow.
From Zhang Changzhong.
5) Check the return value of pskb_trim in esp_remove_trailer
for esp4 and esp6. From Ma Ke.
6) Fix a data-race in xfrm_lookup_with_ifid.
From Eric Dumazet.
* tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix a data-race in xfrm_lookup_with_ifid()
net: ipv4: fix return value check in esp_remove_trailer
net: ipv6: fix return value check in esp_remove_trailer
xfrm6: fix inet6_dev refcount underflow problem
xfrm: fix a data-race in xfrm_gen_index()
xfrm: interface: use DEV_STATS_INC()
net: xfrm: skip policies marked as dead while reinserting policies
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove exports for phylink_caps_to_linkmodes(),
phylink_get_capabilities(), phylink_validate_mask_caps() and
phylink_generic_validate(). Also, as phylink_generic_validate() is no
longer called, we can remove its implementation as well.
Signed-off-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The MAC .validate() method is no longer used, so remove it from the
phylink_mac_ops structure, and remove the callsite in
phylink_validate_mac_and_pcs().
Signed-off-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Provide a new method, mac_get_caps() to get the MAC capabilities for
the specified interface mode. This is for MACs which have special
requirements, such as not supporting half-duplex in certain interface
modes, and will replace the validate() method.
Signed-off-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The previous patch added accounting and a limit for the number of
dynamically learned FDB entries per bridge. However it did not provide
means to actually configure those bounds or read back the count. This
patch does that.
Two new netlink attributes are added for the accounting and limit of
dynamically learned FDB entries:
- IFLA_BR_FDB_N_LEARNED (RO) for the number of entries accounted for
a single bridge.
- IFLA_BR_FDB_MAX_LEARNED (RW) for the configured limit of entries for
the bridge.
The new attributes are used like this:
# ip link add name br up type bridge fdb_max_learned 256
# ip link add name v1 up master br type veth peer v2
# ip link set up dev v2
# mausezahn -a rand -c 1024 v2
0.01 seconds (90877 packets per second
# bridge fdb | grep -v permanent | wc -l
256
# ip -d link show dev br
13: br: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 [...]
[...] fdb_n_learned 256 fdb_max_learned 256
Signed-off-by: Johannes Nixdorf <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Eliminate DRM_SCHED_PRIORITY_UNSET, value of -2, whose only user was
amdgpu. Furthermore, eliminate an index bug, in that when amdgpu boots, it
calls drm_sched_entity_init() with DRM_SCHED_PRIORITY_UNSET, which uses it to
index sched->sched_rq[].
Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Signed-off-by: Luben Tuikov <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
We discovered from packet traces of slow loss recovery on kernels with
the default HZ=250 setting (and min_rtt < 1ms) that after reordering,
when receiving a SACKed sequence range, the RACK reordering timer was
firing after about 16ms rather than the desired value of roughly
min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer
calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels
with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the
exact same issue.
This commit fixes the TLP transmit timer and RACK reordering timer
floor calculation to more closely match the intended 2ms floor even on
kernels with HZ=250. It does this by adding in a new
TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies,
instead of the current approach of converting to jiffies and then
adding th TCP_TIMEOUT_MIN value of 2 jiffies.
Our testing has verified that on kernels with HZ=1000, as expected,
this does not produce significant changes in behavior, but on kernels
with the default HZ=250 the latency improvement can be large. For
example, our tests show that for HZ=250 kernels at low RTTs this fix
roughly halves the latency for the RACK reorder timer: instead of
mostly firing at 16ms it mostly fires at 8ms.
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Fixes: bb4d991a28cc ("tcp: adjust tail loss probe timeout")
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
"Various minor fixes, cleanups and annotations for atyfb, sa1100fb,
omapfb, uvesafb and mmp"
* tag 'fbdev-for-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: core: syscopyarea: fix sloppy typing
fbdev: core: cfbcopyarea: fix sloppy typing
fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
fbdev: uvesafb: Remove uvesafb_exec() prototype from include/video/uvesafb.h
fbdev: sa1100fb: mark sa1100fb_init() static
fbdev: omapfb: fix some error codes
fbdev: atyfb: only use ioremap_uc() on i386 and ia64
fbdev: mmp: Annotate struct mmp_path with __counted_by
fbdev: mmp: Annotate struct mmphw_ctrl with __counted_by
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.7
The second pull request for v6.7, with only driver changes this time.
We have now support for mt7925 PCIe and USB variants, few new features
and of course some fixes.
Major changes:
mt76
- mt7925 support
ath12k
- read board data variant name from SMBIOS
wfx
- Remain-On-Channel (ROC) support
* tag 'wireless-next-2023-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (109 commits)
wifi: rtw89: mac: do bf_monitor only if WiFi 6 chips
wifi: rtw89: mac: set bf_assoc capabilities according to chip gen
wifi: rtw89: mac: set bfee_ctrl() according to chip gen
wifi: rtw89: mac: add registers of MU-EDCA parameters for WiFi 7 chips
wifi: rtw89: mac: generalize register of MU-EDCA switch according to chip gen
wifi: rtw89: mac: update RTS threshold according to chip gen
wifi: rtlwifi: simplify TX command fill callbacks
wifi: hostap: remove unused ioctl function
wifi: atmel: remove unused ioctl function
wifi: rtw89: coex: add annotation __counted_by() to struct rtw89_btc_btf_set_mon_reg
wifi: rtw89: coex: add annotation __counted_by() for struct rtw89_btc_btf_set_slot_table
wifi: rtw89: add EHT radiotap in monitor mode
wifi: rtw89: show EHT rate in debugfs
wifi: rtw89: parse TX EHT rate selected by firmware from RA C2H report
wifi: rtw89: Add EHT rate mask as parameters of RA H2C command
wifi: rtw89: parse EHT information from RX descriptor and PPDU status packet
wifi: radiotap: add bandwidth definition of EHT U-SIG
wifi: rtlwifi: use convenient list_count_nodes()
wifi: p54: Annotate struct p54_cal_database with __counted_by
wifi: brcmfmac: fweh: Add __counted_by for struct brcmf_fweh_queue_item and use struct_size()
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
for-6.7/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.7
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)"
* tag 'nvme-6.7-2023-10-17' of git://git.infradead.org/nvme: (24 commits)
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
nvme: rework NVME_AUTH Kconfig selection
nvmet-tcp: peek icreq before starting TLS
nvmet-tcp: control messages for recvmsg()
nvmet-tcp: enable TLS handshake upcall
nvmet: Set 'TREQ' to 'required' when TLS is enabled
nvmet-tcp: allocate socket file
nvmet-tcp: make nvmet_tcp_alloc_queue() a void function
nvmet: make TCP sectype settable via configfs
nvme-fabrics: parse options 'keyring' and 'tls_key'
nvme-tcp: improve icreq/icresp logging
nvme-tcp: control message handling for recvmsg()
nvme-tcp: enable TLS handshake upcall
nvme-tcp: allocate socket file
security/keys: export key_lookup()
nvme-keyring: implement nvme_tls_psk_default()
nvme-tcp: add definitions for TLS cipher suites
...
|
|
This does not change current behaviour as the driver currently
verifies that the secret size is the same size as the length of
the transformation hash.
Co-developed-by: Akash Appaiah <[email protected]>
Signed-off-by: Akash Appaiah <[email protected]>
Signed-off-by: Mark O'Donovan <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Co-developed-by: Akash Appaiah <[email protected]>
Signed-off-by: Akash Appaiah <[email protected]>
Signed-off-by: Mark O'Donovan <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
The IMS related functions (pci_create_ims_domain(), pci_ims_alloc_irq(),
and pci_ims_free_irq()) are not declared when CONFIG_PCI_MSI is disabled.
Provide definitions of these functions for use when callers are compiled
with CONFIG_PCI_MSI disabled.
Fixes: 0194425af0c8 ("PCI/MSI: Provide IMS (Interrupt Message Store) support")
Fixes: c9e5bea27383 ("PCI/MSI: Provide pci_ims_alloc/free_irq()")
Signed-off-by: Reinette Chatre <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/14ff656899a3757453f8584c1109d7a9b98fa258.1697564731.git.reinette.chatre@intel.com
|
|
Pull in upstream to get the fixes so depending changes can be applied.
|
|
Add read and write functions that allow SED Opal keys to stored
in a permanent keystore.
Signed-off-by: Greg Joyce <[email protected]>
Reviewed-by: Jonathan Derrick <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Merge in io_uring fixes, as the ublk simplifying cancelations and
aborts depend on the two patches from Ming adding cancelation support
for uring_cmd.
* for-6.7/io_uring:
io_uring/kbuf: Use slab for struct io_buffer objects
io_uring/kbuf: Allow the full buffer id space for provided buffers
io_uring/kbuf: Fix check of BID wrapping in provided buffers
io_uring/rsrc: cleanup io_pin_pages()
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
|
|
A few drivers were missing a xdp_do_flush() invocation after
XDP_REDIRECT.
Add three helper functions each for one of the per-CPU lists. Return
true if the per-CPU list is non-empty and flush the list.
Add xdp_do_check_flushed() which invokes each helper functions and
creates a warning if one of the functions had a non-empty list.
Hide everything behind CONFIG_DEBUG_NET.
Suggested-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The "neither writes before and after ..." for the description
of do_write_seqcount_end() should be "neither writes before nor after".
Signed-off-by: Cuda-Chen <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This allows other drivers to be notified when new i3c busses are
attached, referring to a whole i3c bus as opposed to individual
devices.
Signed-off-by: Jeremy Kerr <[email protected]>
Signed-off-by: Matt Johnston <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add the needed board data to support MT8365 SoC.
Signed-off-by: Fabien Parent <[email protected]>
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Alexandre Mergnat <[email protected]>
Tested-by: Alexandre Mergnat <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Merge the immutable branch genpd_dt into next, to allow the DT bindings to
be tested together with new pmdomain changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Add power domains dt-bindings for MT8365.
Signed-off-by: Fabien Parent <[email protected]>
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Alexandre Mergnat <[email protected]>
Tested-by: Alexandre Mergnat <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Dual-licence in order to make it possible for other non-GPL os'es
to re-implement the code. The use of EXPORT_SYMBOL_GPL() is intentionally
left untouched to prevent use of drm_gpuvm as a proxy for non-GPL drivers
to access GPL-only kernel symbols.
Much of the ideas and algorithms used in the drm_gpuvm code is already
present in one way or another in MIT-licensed code.
Cc: Danilo Krummrich <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Thomas Hellström <[email protected]>
Acked-by: Danilo Krummrich <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.7.
The notable changes are:
- uAPI changes:
- Expose tsc clock sampling to better sync clock information in profiler.
- Enhance engine error reporting in the info ioctl.
- Block access to the eventfd operations through the control device.
- Disable the option of the user to register multiple times with the same
offset for timestamp dump by the driver. If a user wants to use the same
offset in the timestamp buffer for different interrupt, it needs to first
de-register the offset.
- When exporting dma-buf (for p2p), force the user to specify size/offset
in multiples of PAGE_SIZE. This is instead of the driver doing the
rounding to PAGE_SIZE, which has caused the driver to map more memory
than was intended by the user.
- New features and improvements:
- Complete the move of the driver to the accel subsystem by removing the
custom habanalabs class and major and registering to accel subsystem.
- Move the firmware interface files to include/linux/habanalabs. This is
a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to
include those files).
- Perform device hard-reset upon PCIe AXI drain event to prevent the failure
from cascading to different IP blocks in the SoC. In secured environments,
this is done automatically by the firmware.
- Print device name when it is removed for better debuggability.
- Add support for trace of dma map sgtable operations.
- Optimize handling of user interrupts by splitting the interrupts to two
lists. One list for fast handling and second list for handling with
timestamp recording, which is slower.
- Prevent double device hard-reset due to 2 adjacent H/W events.
- Set device status 'malfunction' while in rmmod.
- Firmware related fixes:
- Extend preboot timeout because preboot loading might take longer than
expected in certain cases.
- Add a protection mechanism for the Event Queue. In case it is full, the
firmware will be able to notify about it through a dedicated interrupt.
- Perform device hard-reset in case scrubbing of memory has failed.
- Bug fixes and code cleanups:
- Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0,
using the correct exported size, creation of sg table.
- Fix spmu mask creation.
- Fix bug in wait for cs completion for decoder workloads.
- Cleanup Greco name from documentation.
- Fix bug in recording timestamp during cs completion interrupt handling.
- Fix CoreSight ETF configuration and flush logic.
- Fix small bug in hpriv_list handling (the list that contains the private
data per process that opens our device).
Signed-off-by: Dave Airlie <[email protected]>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta
# 54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u
# VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv
# YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx
# L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk
# 8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw
# Rcp2576E7rByIBu3RAFlrioWhuR5Zw==
# =2ien
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 10 Oct 2023 19:51:00 AEST
# gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780
# gpg: Can't check signature: No public key
From: Oded Gabbay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are implemented
- Restore the functionnality of Permission Indirection that was
broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build
s390:
- One small fix for gisa to avoid stalls
x86:
- Truncate writes to PMU counters to the counter's width to avoid
spurious overflows when emulating counter events in software
- Set the LVTPC entry mask bit when handling a PMI (to match
Intel-defined architectural behavior)
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
to kick the guest out of emulated halt
- Fix for loading XSAVE state from an old kernel into a new one
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert
statements
- Clean up stale test metadata
- Zero-initialize structures in memslot perf test to workaround a
suspected 'may be used uninitialized' false positives from GCC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
KVM: arm64: POR{E0}_EL1 do not need trap handlers
KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
KVM: MIPS: fix -Wunused-but-set-variable warning
KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
x86: KVM: SVM: add support for Invalid IPI Vector interception
x86: KVM: SVM: always update the x2avic msr interception
KVM: selftests: Force load all supported XSAVE state in state test
KVM: selftests: Load XSAVE state into untouched vCPU during state test
KVM: selftests: Touch relevant XSAVE state in guest for state test
KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
KVM: selftests: Zero-initialize entire test_result in memslot perf test
KVM: selftests: Remove obsolete and incorrect test case metadata
KVM: selftests: Treat %llx like %lx when formatting guest printf
KVM: x86/pmu: Synthesize at most one PMI per VM-exit
KVM: x86: Mask LVTPC when handling a PMI
KVM: x86/pmu: Truncate counter value to allowed width on write
...
|
|
Currently page_pool_alloc_frag() is not supported in 32-bit
arch with 64-bit DMA because of the overlap issue between
pp_frag_count and dma_addr_upper in 'struct page' for those
arches, which seems to be quite common, see [1], which means
driver may need to handle it when using fragment API.
It is assumed that the combination of the above arch with an
address space >16TB does not exist, as all those arches have
64b equivalent, it seems logical to use the 64b version for a
system with a large address space. It is also assumed that dma
address is page aligned when we are dma mapping a page aligned
buffer, see [2].
That means we're storing 12 bits of 0 at the lower end for a
dma address, we can reuse those bits for the above arches to
support 32b+12b, which is 16TB of memory.
If we make a wrong assumption, a warning is emitted so that
user can report to us.
1. https://lore.kernel.org/all/[email protected]/
2. https://lore.kernel.org/all/[email protected]/
Tested-by: Alexander Lobakin <[email protected]>
Signed-off-by: Yunsheng Lin <[email protected]>
CC: Lorenzo Bianconi <[email protected]>
CC: Alexander Duyck <[email protected]>
CC: Liang Chen <[email protected]>
CC: Guillaume Tucker <[email protected]>
CC: Matthew Wilcox <[email protected]>
CC: Linux-MM <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix race when opening vhci device
- Avoid memcmp() out of bounds warning
- Correctly bounds check and pad HCI_MON_NEW_INDEX name
- Fix using memcmp when comparing keys
- Ignore error return for hci_devcd_register() in btrtl
- Always check if connection is alive before deleting
- Fix a refcnt underflow problem for hci_conn
* tag 'for-net-2023-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name
Bluetooth: avoid memcmp() out of bounds warning
Bluetooth: hci_sock: fix slab oob read in create_monitor_event
Bluetooth: btrtl: Ignore error return for hci_devcd_register()
Bluetooth: hci_event: Fix coding style
Bluetooth: hci_event: Fix using memcmp when comparing keys
Bluetooth: Fix a refcnt underflow problem for hci_conn
Bluetooth: hci_sync: always check if connection is alive before deleting
Bluetooth: Reject connection with the device which has same BD_ADDR
Bluetooth: hci_event: Ignore NULL link key
Bluetooth: ISO: Fix invalid context error
Bluetooth: vhci: Fix race when opening vhci device
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
OPP framework can be used to scale the clocks along with other entities
such as regulators, performance state etc... So let's add support for
parsing OPP from devicetree. OPP support in devicetree is added through the
"operating-points-v2" property which accepts the OPP table defining clock
frequency, regulator voltage, power domain performance state etc...
Since the UFS controller requires multiple clocks to be controlled for
proper working, devm_pm_opp_set_config() has been used which supports
scaling multiple clocks through custom ufshcd_opp_config_clks() callback.
It should be noted that the OPP support is not compatible with the old
"freq-table-hz" property. So only one can be used at a time even though
the UFS core supports both.
Co-developed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|