aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-03-30xen/xenbus: remove unused xenbus_map_ring()Juergen Gross1-7/+0
xenbus_map_ring() is used nowhere in the tree, remove it. xenbus_unmap_ring() is used only locally, so make it static and move it up. Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2020-03-30pwm: Implement some checks for lowlevel driversUwe Kleine-König1-1/+3
There are some expectations which the callbacks provided by lowlevel drivers should fulfill. Implement checks that help driver authors to get these semantics right. As these have some overhead the checks can be disabled using a Kconfig setting. Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2020-03-30PCI: Add support for root bus sizingIvan Kokshaysky1-0/+1
In certain cases we should be able to enumerate IO and MEM ranges of all PCI devices installed in the system, and then set respective host bridge apertures basing on calculated size and alignment. Particularly when firmware is broken and fails to assign bridge windows properly, like on Alpha UP1500 platform. Actually, almost everything is already in place, and required changes are minimal: - add "size_windows" flag to struct pci_host_bridge: when set, it instructs __pci_bus_size_bridges() to continue with the root bus; - in the __pci_bus_size_bridges() path: add checks for bus->self, as it can legitimately be null for the root bus. Link: https://lore.kernel.org/r/[email protected] Tested-by: Matt Turner <[email protected]> Signed-off-by: Ivan Kokshaysky <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-03-30PCI: Use ioremap(), not phys_to_virt() for platform ROMMikel Rychliski1-1/+0
On some EFI systems, the video BIOS is provided by the EFI firmware. The boot stub code stores the physical address of the ROM image in pdev->rom. Currently we attempt to access this pointer using phys_to_virt(), which doesn't work with CONFIG_HIGHMEM. On these systems, attempting to load the radeon module on a x86_32 kernel can result in the following: BUG: unable to handle page fault for address: 3e8ed03c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 317 Comm: systemd-udevd Not tainted 5.6.0-rc3-next-20200228 #2 Hardware name: Apple Computer, Inc. MacPro1,1/Mac-F4208DC8, BIOS MP11.88Z.005C.B08.0707021221 07/02/07 EIP: radeon_get_bios+0x5ed/0xe50 [radeon] Code: 00 00 84 c0 0f 85 12 fd ff ff c7 87 64 01 00 00 00 00 00 00 8b 47 08 8b 55 b0 e8 1e 83 e1 d6 85 c0 74 1a 8b 55 c0 85 d2 74 13 <80> 38 55 75 0e 80 78 01 aa 0f 84 a4 03 00 00 8d 74 26 00 68 dc 06 EAX: 3e8ed03c EBX: 00000000 ECX: 3e8ed03c EDX: 00010000 ESI: 00040000 EDI: eec04000 EBP: eef3fc60 ESP: eef3fbe0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010206 CR0: 80050033 CR2: 3e8ed03c CR3: 2ec77000 CR4: 000006d0 Call Trace: r520_init+0x26/0x240 [radeon] radeon_device_init+0x533/0xa50 [radeon] radeon_driver_load_kms+0x80/0x220 [radeon] drm_dev_register+0xa7/0x180 [drm] radeon_pci_probe+0x10f/0x1a0 [radeon] pci_device_probe+0xd4/0x140 Fix the issue by updating all drivers which can access a platform provided ROM. Instead of calling the helper function pci_platform_rom() which uses phys_to_virt(), call ioremap() directly on the pdev->rom. radeon_read_platform_bios() previously directly accessed an __iomem pointer. Avoid this by calling memcpy_fromio() instead of kmemdup(). pci_platform_rom() now has no remaining callers, so remove it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mikel Rychliski <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Alex Deucher <[email protected]>
2020-03-30Merge branches 'acpi-button', 'acpi-battery', 'acpi-osl', 'acpi-video' and ↵Rafael J. Wysocki1-0/+4
'acpi-misc' * acpi-button: ACPI: Add new tiny-power-button driver to directly signal init ACPI: button: move HIDs to acpi/button.h * acpi-battery: ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry ACPI / AC: Cleanup DMI quirk table * acpi-osl: ACPI: OSL: Add missing __acquires/__releases annotations * acpi-video: ACPI: video: remove redundant assignments to variable result * acpi-misc: ACPI: list_for_each_safe() -> list_for_each_entry_safe()
2020-03-30Merge branch 'acpica'Rafael J. Wysocki2-2/+2
* acpica: ACPICA: Update version to 20200214 ACPICA: Fix a couple of typos ACPICA: use acpi_size instead of u32 for prefix_path_length ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32 ACPICA: cast the result of the pointer difference to u32 ACPICA: Table Manager: Update comments in a function header ACPICA: Enable sleep button on ACPI legacy wake ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events. ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()
2020-03-30ACPICA: Update version 20200326Bob Moore1-1/+1
ACPICA commit 994fe943d93fe18eaaed1b6cd725023399f8a5c6 Version 20200326. Link: https://github.com/acpica/acpica/commit/994fe943 Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-03-30ACPICA: Add NHLT table signatureCezary Rojewski1-0/+1
ACPICA commit 422166b656565d180bb3aac712009bdce5e70cdd NHLT (Non-HDAudio Link Table) provides configuration of audio endpoints for Intel SST (Smart Sound Technology) DSP products. Similarly to other ACPI tables, data provided by BIOS may not describe it correctly, thus overriding is required. ACPI override mechanism checks for unknown signature before proceeding. Update known signatures array to support NHLT. Link: https://github.com/acpica/acpica/commit/422166b6 Signed-off-by: Cezary Rojewski <[email protected]> Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-03-30ACPICA: WSMT: Fix typo, no functional changeErik Kaneda1-3/+3
ACPICA commit 764d18c5a83949ff3b0dbda6055cee1929b9caa2 The table signature WSMT stands for "Windows SMM Mitigations Table". It is not "Windows SMM Migrations Table". Link: https://github.com/acpica/acpica/commit/764d18c5 Reported-by: Laszlo Ersek <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-03-30ACPICA: Fix IVRS IVHD type 10h reserved field nameMichał Żygowski1-1/+1
ACPICA commit 87a1ab2b2a63e28776261c48bdbae345f790d05d According to AMD IOMMU Specification Revision 3.05 the reserved field should be IOMMU Feature Reporting. Change the name of the field to the correct one. Link: https://github.com/acpica/acpica/commit/87a1ab2b Signed-off-by: Michał Żygowski <[email protected]> Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-03-30ACPICA: Implement IVRS IVHD type 11h parsingMichał Żygowski1-2/+16
ACPICA commit 6ddc19419896e4149ced1b5f35f0dc12516c0399 The AMD IVRS table parsing supported only IVHD type 10h structures. Parsing an IVHD type 11h caused the iasl to report unknown subtable type. Add necessary structure definition for IVHD type 11h and apply correct parsing method based on subtable type. Link: https://github.com/acpica/acpica/commit/6ddc1941 Signed-off-by: Michał Żygowski <[email protected]> Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-03-30ACPICA: Fix a typo in a comment fieldBob Moore1-1/+1
ACPICA commit f3504c591c8766c70402dcc786391ff6748b515a Link: https://github.com/acpica/acpica/commit/f3504c59 Reported-by: Christophe Jaillet <[email protected]> Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-03-30ACPICA: Update version to 20200214Bob Moore1-1/+1
ACPICA commit ac0c1b8a43a317702bb11e11fd5067a1c59e3002 Version 20200214 Link: https://github.com/acpica/acpica/commit/ac0c1b8a Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-03-30Merge branches 'pm-devfreq', 'powercap' and 'pm-docs'Rafael J. Wysocki1-54/+52
* pm-devfreq: PM / devfreq: Get rid of some doc warnings PM / devfreq: Fix handling dev_pm_qos_remove_request result PM / devfreq: Fix a typo in a comment PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name PM / devfreq: Remove unneeded extern keyword PM / devfreq: Use constant name of userspace governor * powercap: powercap: idle_inject: Replace zero-length array with flexible-array member * pm-docs: docs: cpu-freq: convert cpufreq-stats.txt to ReST docs: cpu-freq: convert cpu-drivers.txt to ReST docs: cpu-freq: convert core.txt to ReST docs: cpu-freq: convert index.txt to ReST docs: cpufreq: fix a broken reference Documentation: cpufreq: Move legacy driver documentation
2020-03-30Merge branches 'pm-core', 'pm-sleep', 'pm-acpi' and 'pm-domains'Rafael J. Wysocki2-2/+12
* pm-core: PM: runtime: Add pm_runtime_get_if_active() * pm-sleep: PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer PM: sleep: wakeup: Use built-in RCU list checking PM: sleep: core: Use built-in RCU list checking * pm-acpi: ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() * pm-domains: cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
2020-03-30Merge branch 'pm-qos'Rafael J. Wysocki2-81/+59
* pm-qos: (30 commits) PM: QoS: annotate data races in pm_qos_*_value() Documentation: power: fix pm_qos_interface.rst format warning PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE Documentation: PM: QoS: Update to reflect previous code changes PM: QoS: Update file information comments PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions sound: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*() drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*() x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*() cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request() PM: QoS: Add CPU latency QoS API wrappers PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h PM: QoS: Simplify definitions of CPU latency QoS trace events ...
2020-03-30Merge remote-tracking branch 'regulator/for-next' into tmpMark Brown2-2/+3
2020-03-30Merge tag 'asoc-v5.7' of ↵Takashi Iwai91-494/+609
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.7 This is a very big update for the core since Morimoto-san has been rather busy continuing his refactorings to clean up a lot of the cruft that we have accumilated over the years. We've also gained several new drivers, including initial (but still not complete) parts of the Intel SoundWire support. - Lots of refactorings to modernize the code from Morimoto-san. - Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven. - Continued refactoring and fixing of the Intel support. - Soundwire and more advanced clocking support for Realtek RT5682. - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and TLV320ADCX140.
2020-03-30Merge branch 'sched/rt' into sched/core, to pick up completed topic treeIngo Molnar2-0/+37
Signed-off-by: Ingo Molnar <[email protected]>
2020-03-30ceph: consider inode's last read/write when calculating wanted capsYan, Zheng1-0/+1
Add i_last_rd and i_last_wr to ceph_inode_info. These fields are used to track the last time the client acquired read/write caps for the inode. If there is no read/write on an inode for 'caps_wanted_delay_max' seconds, __ceph_caps_file_wanted() does not request caps for read/write even there are open files. Call __ceph_touch_fmode() for dir operations. __ceph_caps_file_wanted() calculates dir's wanted caps according to last dir read/modification. If there is recent dir read, dir inode wants CEPH_CAP_ANY_SHARED caps. If there is recent dir modification, also wants CEPH_CAP_FILE_EXCL. Readdir is a special case. Dir inode wants CEPH_CAP_FILE_EXCL after readdir, as with that, modifications do not need to release CEPH_CAP_FILE_SHARED or invalidate all dentry leases issued by readdir. Signed-off-by: "Yan, Zheng" <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-03-30ceph: attempt to do async create when possibleJeff Layton1-0/+3
With the Octopus release, the MDS will hand out directory create caps. If we have Fxc caps on the directory, and complete directory information or a known negative dentry, then we can return without waiting on the reply, allowing the open() call to return very quickly to userland. We use the normal ceph_fill_inode() routine to fill in the inode, so we have to gin up some reply inode information with what we'd expect the newly-created inode to have. The client assumes that it has a full set of caps on the new inode, and that the MDS will revoke them when there is conflicting access. This functionality is gated on the wsync/nowsync mount options. Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-03-30ceph: cap tracking for async directory operationsJeff Layton1-0/+6
Track and correctly handle directory caps for asynchronous operations. Add aliases for Frc caps that we now designate at Dcu caps (when dealing with directories). Unlike file caps, we don't reclaim these when the session goes away, and instead preemptively release them. In-flight async dirops are instead handled during reconnect phase. The client needs to re-do a synchronous operation in order to re-get directory caps. Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-03-30ceph: track primary dentry linkJeff Layton1-0/+3
Newer versions of the MDS will flag a dentry as "primary". In later patches, we'll need to consult this info, so track it in di->flags. Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-03-30ceph: add flag to designate that a request is asynchronousJeff Layton1-2/+3
...and ensure that such requests are never queued. The MDS has need to know that a request is asynchronous so add flags and proper infrastructure for that. Also, delegated inode numbers and directory caps are associated with the session, so ensure that async requests are always transmitted on the first attempt and are never queued to wait for session reestablishment. If it does end up looking like we'll need to queue the request, then have it return -EJUKEBOX so the caller can reattempt with a synchronous request. Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-03-30ceph: move to a dedicated slabcache for mds requestsJeff Layton1-0/+1
On my machine (x86_64) this struct is 952 bytes, which gets rounded up to 1024 by kmalloc. Move this to a dedicated slabcache, so we can allocate them without the extra 72 bytes of overhead per. Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: Ilya Dryomov <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-03-30ceph: move ceph_osdc_{read,write}pages to ceph.koXiubo Li1-17/+0
Since these helpers are only used by ceph.ko, move them there and rename them with _sync_ qualifiers. Signed-off-by: Xiubo Li <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-03-30libceph: drop CEPH_DEFINE_SHOW_FUNCIlya Dryomov1-14/+0
Although CEPH_DEFINE_SHOW_FUNC is much older, it now duplicates DEFINE_SHOW_ATTRIBUTE from linux/seq_file.h. Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jeff Layton <[email protected]>
2020-03-30Merge tag 'nand/for-5.7' into mtd/nextMiquel Raynal2-23/+55
Raw NAND core changes: * Add support for manufacturer specific suspend/resume operation * Add support for manufacturer specific lock/unlock operation * Replace zero-length array with flexible-array member * Fix a typo ("manufecturer") * Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: * Brcmnand: Add support for flash-edu for dma transfers (+ bindings) * Cadence: Reinit completion before executing a new command Change bad block marker size Fix the calculation of the avaialble OOB size Get meta data size from registers * Qualcom: Use dma_request_chan() instead dma_request_slave_channel() Release resources on failure within qcom_nandc_alloc() * Allwinner: Use dma_request_chan() instead dma_request_slave_channel() * Marvell: Use dma_request_chan() instead dma_request_slave_channel() Release DMA channel on error * Freescale: Use dma_request_chan() instead dma_request_slave_channel() * Macronix: Add support for Macronix NAND randomizer (+ bindings) * Ams-delta: Rename structures and functions to gpio_nand* Make the driver custom I/O ready Drop useless local variable Support custom driver initialisation Add module device tables Handle more GPIO pins as optional Make read pulses optional Don't hardcode read/write pulse widths Push inversion handling to gpiolib Enable OF partition info support Drop board specific partition info Use struct gpio_nand_platdata Write protect device during probe * Ingenic: Use devm_platform_ioremap_resource() Add dependency on MIPS || COMPILE_TEST * Denali: Deassert write protect pin * ST: Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: * Toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) * Macronix: Add support for deep power down mode Add support for block protection SPI-NAND core changes: * Do not erase the block before writing a bad block marker * Explicitly use MTD_OPS_RAW to write the bad block marker to OOB * Stop using spinand->oobbuf for buffering bad block markers * Rework detect procedure for different READ_ID operation SPI-NAND driver changes: * Toshiba: Support for new Kioxia Serial NAND Rename function name to change suffix and prefix (8Gbit) Add comment about Kioxia ID * Micron: Add new Micron SPI NAND devices with multiple dies Add M70A series Micron SPI NAND devices identify SPI NAND device with Continuous Read mode Add new Micron SPI NAND devices Describe the SPI NAND device MT29F2G01ABAGD Generalize the OOB layout structure and function names
2020-03-30Merge branches 'edac-mc-cleanup', 'edac-misc', 'edac-drivers' and ↵Borislav Petkov1-4/+5
'edac-urgent' into edac-updates-for-5.7 Signed-off-by: Borislav Petkov <[email protected]>
2020-03-29Merge branch 'mlx5-next' of ↵Saeed Mahameed1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: mlx5: Remove uninitialized use of key in mlx5_core_create_mkey {IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib {IB,net}/mlx5: Assign mkey variant in mlx5_ib only {IB,net}/mlx5: Setup mkey variant before mr create command invocation Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-30mfd: sc27xx: Add USB charger type detection supportBaolin Wang1-0/+7
The Spreadtrum SC27XX series PMICs supply the USB charger type detection function, and related registers are located on the PMIC global registers region, thus we implement and export this function in the MFD driver for users to get the USB charger type. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2020-03-30mfd: rk808: Convert RK805 to shutdown/suspend hooksRobin Murphy1-1/+0
RK805 has the same kind of dual-role sleep/shutdown pin as RK809/RK817, so it makes little sense for the driver to have to have two completely different mechanisms to handle essentially the same thing. Move RK805 over to the shutdown/suspend flow to clean things up. Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2020-03-30mfd: rk808: Reduce shutdown duplicationRobin Murphy1-1/+0
Rather than having 3 almost-identical functions plus the machinery to keep track of them, it's far simpler to just dynamically select the appropriate register field per variant. Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2020-03-30Merge branches 'ib-mfd-iio-input-5.7' and 'ib-mfd-iio-rtc-5.7' into ↵Lee Jones1-0/+26
ibs-for-mfd-merged
2020-03-30iio: cros_ec: Use Hertz as unit for sampling frequencyGwendal Grignou1-3/+3
To be compliant with other sensors, set and get sensor sampling frequency in Hz, not mHz. Fixes: ae7b02ad2f32 ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs") Signed-off-by: Gwendal Grignou <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Enric Balletbo i Serra <[email protected]>
2020-03-29ethtool: provide timestamping information with TSINFO_GET requestMichal Kubecek1-0/+17
Implement TSINFO_GET request to get timestamping information for a network device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl request. Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink code use the same logic to get timestamping information from the device. v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran Signed-off-by: Michal Kubecek <[email protected]> Acked-by: Richard Cochran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: add timestamping related string setsMichal Kubecek2-0/+12
Add three string sets related to timestamping information: ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags ETH_SS_TS_TX_TYPES: timestamping Tx types ETH_SS_TS_RX_FILTERS: timestamping Rx filters These will be used for TIMESTAMP_GET request. v2: avoid compiler warning ("enumeration value not handled in switch") in net_hwtstamp_validate() v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by Richard Cochran Signed-off-by: Michal Kubecek <[email protected]> Acked-by: Richard Cochran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: add EEE_NTF notificationMichal Kubecek1-0/+1
Send ETHTOOL_MSG_EEE_NTF notification whenever EEE settings of a network device are modified using ETHTOOL_MSG_EEE_SET netlink message or ETHTOOL_SEEE ioctl request. Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: set EEE settings with EEE_SET requestMichal Kubecek1-0/+1
Implement EEE_SET netlink request to set EEE settings of a network device. These are traditionally set with ETHTOOL_SEEE ioctl request. The netlink interface allows setting the EEE status for all link modes supported by kernel but only first 32 link modes can be set at the moment as only those are supported by the ethtool_ops callback. Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: provide EEE settings with EEE_GET requestMichal Kubecek1-0/+19
Implement EEE_GET request to get EEE settings of a network device. These are traditionally available via ETHTOOL_GEEE ioctl request. The netlink interface allows reporting EEE status for all link modes supported by kernel but only first 32 link modes are provided at the moment as only those are reported by the ethtool_ops callback and drivers. v2: fix alignment (whitespace only) Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: add PAUSE_NTF notificationMichal Kubecek1-0/+1
Send ETHTOOL_MSG_PAUSE_NTF notification whenever pause parameters of a network device are modified using ETHTOOL_MSG_PAUSE_SET netlink message or ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: set pause parameters with PAUSE_SET requestMichal Kubecek1-0/+1
Implement PAUSE_SET netlink request to set pause parameters of a network device. Thease are traditionally set with ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: provide pause parameters with PAUSE_GET requestMichal Kubecek1-0/+16
Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: add COALESCE_NTF notificationMichal Kubecek1-0/+1
Send ETHTOOL_MSG_COALESCE_NTF notification whenever coalescing parameters of a network device are modified using ETHTOOL_MSG_COALESCE_SET netlink message or ETHTOOL_SCOALESCE ioctl request. Signed-off-by: Michal Kubecek <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: set coalescing parameters with COALESCE_SET requestMichal Kubecek1-0/+1
Implement COALESCE_SET netlink request to set coalescing parameters of a network device. These are traditionally set with ETHTOOL_SCOALESCE ioctl request. This commit adds only support for device coalescing parameters, not per queue coalescing parameters. Like the ioctl implementation, the generic ethtool code checks if only supported parameters are modified; if not, first offending attribute is reported using extack. v2: fix alignment (whitespace only) Signed-off-by: Michal Kubecek <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29ethtool: provide coalescing parameters with COALESCE_GET requestMichal Kubecek1-0/+35
Implement COALESCE_GET request to get coalescing parameters of a network device. These are traditionally available via ETHTOOL_GCOALESCE ioctl request. This commit adds only support for device coalescing parameters, not per queue coalescing parameters. Omit attributes with zero values unless they are declared as supported (i.e. the corresponding bit in ethtool_ops::supported_coalesce_params is set). Signed-off-by: Michal Kubecek <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29net: ipv6: add rpl sr tunnelAlexander Aring3-0/+34
This patch adds functionality to configure routes for RPL source routing functionality. There is no IPIP functionality yet implemented which can be added later when the cases when to use IPv6 encapuslation comes more clear. Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29net: add net available in build_stateAlexander Aring2-5/+6
The build_state callback of lwtunnel doesn't contain the net namespace structure yet. This patch will add it so we can check on specific address configuration at creation time of rpl source routes. Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29net: ipv6: add support for rpl sr exthdrAlexander Aring3-0/+37
This patch adds rpl source routing receive handling. Everything works only if sysconf "rpl_seg_enabled" and source routing is enabled. Mostly the same behaviour as IPv6 segmentation routing. To handle compression and uncompression a rpl.c file is created which contains the necessary functionality. The receive handling will also care about IPv6 encapsulated so far it's specified as possible nexthdr in RFC 6554. Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-29addrconf: add functionality to check on rpl requirementsAlexander Aring1-0/+3
This patch adds a functionality to addrconf to check on a specific RPL address configuration. According to RFC 6554: To detect loops in the SRH, a router MUST determine if the SRH includes multiple addresses assigned to any interface on that router. If such addresses appear more than once and are separated by at least one address not assigned to that router. Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.