aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2017-06-22NFC: st-nci: Get rid of platform dataAndy Shevchenko1-31/+0
Legacy platform data must go away. We are on the safe side here since there are no users of it in the kernel. If anyone by any odd reason needs it the GPIO lookup tables and built-in device properties at your service. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: nfcmrvl: allow gpio 0 for reset signallingJohan Hovold1-1/+1
Allow gpio 0 to be used for reset signalling, and instead use negative errnos to disable the reset functionality. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-17net: add debug atomic_inc_not_zero() in dst_hold()Wei Wang1-1/+1
This patch is meant to add a debug warning on the situation where dst is being held during its destroy phase. This could potentially cause double free issue on the dst. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17net: reorder all the dst flagsWei Wang1-5/+5
As some dst flags are removed, reorder the dst flags to fill in the blanks. Note: these flags are not exposed into user space. So it is safe to reorder. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17net: remove DST_NOCACHE flagWei Wang2-2/+1
DST_NOCACHE flag check has been removed from dst_release() and dst_hold_safe() in a previous patch because all the dst are now ref counted properly and can be released based on refcnt only. Looking at the rest of the DST_NOCACHE use, all of them can now be removed or replaced with other checks. So this patch gets rid of all the DST_NOCACHE usage and remove this flag completely. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17net: remove DST_NOGC flagWei Wang1-5/+1
Now that all the components have been changed to release dst based on refcnt only and not depend on dst gc anymore, we can remove the temporary flag DST_NOGC. Note that we also need to remove the DST_NOCACHE check in dst_release() and dst_hold_safe() because now all the dst are released based on refcnt and behaves as DST_NOCACHE. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17net: remove dst gc related codeWei Wang1-21/+0
This patch removes all dst gc related code and all the dst free functions Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17xfrm: take refcnt of dst when creating struct xfrm_dst bundleWei Wang1-1/+0
During the creation of xfrm_dst bundle, always take ref count when allocating the dst. This way, xfrm_bundle_create() will form a linked list of dst with dst->child pointing to a ref counted dst child. And the returned dst pointer is also ref counted. This makes the link from the flow cache to this dst now ref counted properly. As the dst is always ref counted properly, we can safely mark DST_NOGC flag so dst_release() will release dst based on refcnt only. And dst gc is no longer needed and all dst_free() and its related function calls should be replaced with dst_release() or dst_release_immediate(). The special handling logic for dst->child in dst_destroy() can be replaced with a simple dst_release_immediate() call on the child to release the whole list linked by dst->child pointer. Previously used DST_NOHASH flag is not needed anymore as well. The reason that DST_NOHASH is used in the existing code is mainly to prevent the dst inserted in the fib tree to be wrongly destroyed during the deletion of the xfrm_dst bundle. So in the existing code, DST_NOHASH flag is marked in all the dst children except the one which is in the fib tree. However, with this patch series to remove dst gc logic and release dst only based on ref count, it is safe to release all the children from a xfrm_dst bundle as long as the dst children are all ref counted properly which is already the case in the existing code. So, this patch removes the use of DST_NOHASH flag. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17ipv6: get rid of icmp6 dst garbage collectorWei Wang1-1/+0
icmp6 dst route is currently ref counted during creation and will be freed by user during its call of dst_release(). So no need of a garbage collector for it. Remove all icmp6 dst garbage collector related code. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17ipv4: call dst_hold_safe() properlyWei Wang1-1/+3
This patch checks all the calls to dst_hold()/skb_dst_force()/dst_clone()/dst_use() to see if dst_hold_safe() is needed to avoid double free issue if dst gc is removed and dst_release() directly destroys dst when dst->__refcnt drops to 0. In tx path, TCP hold sk->sk_rx_dst ref count and also hold sock_lock(). UDP and other similar protocols always hold refcount for skb->_skb_refdst. So both paths seem to be safe. In rx path, as it is lockless and skb_dst_set_noref() is likely to be used, dst_hold_safe() should always be used when trying to hold dst. In the routing code, if dst is held during an rcu protected session, it is necessary to call dst_hold_safe() as the current dst might be in its rcu grace period. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17net: introduce a new function dst_dev_put()Wei Wang1-0/+1
This function should be called when removing routes from fib tree after the dst gc is no longer in use. We first mark DST_OBSOLETE_DEAD on this dst to make sure next dst_ops->check() fails and returns NULL. Secondly, as we no longer keep the gc_list, we need to properly release dst->dev right at the moment when the dst is removed from the fib/fib6 tree. It does the following: 1. change dst->input and output pointers to dst_discard/dst_dscard_out to discard all packets 2. replace dst->dev with loopback interface Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17net: introduce DST_NOGC in dst_release() to destroy dst based on refcntWei Wang1-1/+4
The current mechanism of freeing dst is a bit complicated. dst has its ref count and when user grabs the reference to the dst, the ref count is properly taken in most cases except in IPv4/IPv6/decnet/xfrm routing code due to some historic reasons. If the reference to dst is always taken properly, we should be able to simplify the logic in dst_release() to destroy dst when dst->__refcnt drops from 1 to 0. And this should be the only condition to determine if we can call dst_destroy(). And as dst is always ref counted, there is no need for a dst garbage list to hold the dst entries that already get removed by the routing code but are still held by other users. And the task to periodically check the list to free dst if ref count become 0 is also not needed anymore. This patch introduces a temporary flag DST_NOGC(no garbage collector). If it is set in the dst, dst_release() will call dst_destroy() when dst->__refcnt drops to 0. dst_hold_safe() will also check for this flag and do atomic_inc_not_zero() similar as DST_NOCACHE to avoid double free issue. This temporary flag is mainly used so that we can make the transition component by component without breaking other parts. This flag will be removed after all components are properly transitioned. This patch also introduces a new function dst_release_immediate() which destroys dst without waiting on the rcu when refcnt drops to 0. It will be used in later patches. Follow-up patches will correct all the places to properly take ref count on dst and mark DST_NOGC. dst_release() or dst_release_immediate() will be used to release the dst instead of dst_free() and its related functions. And final clean-up patch will remove the DST_NOGC flag. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16Merge tag 'mlx5-updates-2017-06-16' of ↵David S. Miller3-7/+16
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox mlx5 updates and cleanups 2017-06-16 mlx5-updates-2017-06-16 This series provide some updates and cleanups for mlx5 core and netdevice driver. From Eli Cohen, add a missing event string. From Or Gerlitz, some checkpatch cleanups. From Moni, Disalbe HW level LAG when SRIOV is enabled. From Tariq, A code reuse cleanup in aRFS flow. From Itay Aveksis, Typo fix. From Gal Pressman, ethtool statistics updates and "update stats" deferred work optimizations. From Majd Dibbiny, Fast unload support on kernel shutdown. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net: Add IFLA_XDP_PROG_IDMartin KaFai Lau2-2/+6
Expose prog_id through IFLA_XDP_PROG_ID. This patch makes modification to generic_xdp. The later patches will modify other xdp-supported drivers. prog_id is added to struct net_dev_xdp. iproute2 patch will be followed. Here is how the 'ip link' will look like: > ip link show eth0 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdp(prog_id:1) qdisc fq_codel state UP mode DEFAULT group default qlen 1000 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: add and use skb_put_u8()Johannes Berg1-0/+5
Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg2-5/+4
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_pull & friends return void pointersJohannes Berg1-7/+7
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg1-4/+4
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg2-1/+11
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx5: Add fast unload support in shutdown flowMajd Dibbiny1-3/+11
Adding a support to flush all HW resources with one FW command and skip all the heavy unload flows of the driver on kernel shutdown. There's no need to free all the SW context since a new fresh kernel will be loaded afterwards. Regarding the FW resources, they should be closed, otherwise we will have leakage in the FW. To accelerate this flow, we execute one command in the beginning that tells the FW that the driver isn't going to close any of the FW resources and asks the FW to clean up everything. Once the commands complete, it's safe to close the PCI resources and finish the routine. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-16net/mlx5: Expose command polling interfaceMajd Dibbiny1-0/+3
Add a new interface for commands execution that allows the caller to wait for the command's completion in a busy-wait loop (polling mode). This is useful if we want to execute a command in a polling mode while the driver is working in events mode for the rest of the commands. This interface will be used in the downstream patches. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-16net/mlx5e: Move and optimize query out of buffer functionGal Pressman1-2/+0
Move "query queue counter out of buffer" helper function out of qp.c to en_main.c, since mlx5e netdev driver is the only one to use it. Also allocate the output buffer on the stack instead of the heap, to reduce number of heap allocs on update_stats work. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com
2017-06-16net/mlx5: Fix some spelling mistakesOr Gerlitz1-2/+2
Fixed few places where endianness was misspelled and one spot whwere output was: CHECK: 'endianess' may be misspelled - perhaps 'endianness'? CHECK: 'ouput' may be misspelled - perhaps 'output'? Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-15net: sched: act_tunnel_key: make UDP checksum configurableJiri Benc1-0/+1
Allow requesting of zero UDP checksum for encapsulated packets. The name and meaning of the attribute is "NO_CSUM" in order to have the same meaning of the attribute missing and being 0. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15skbuff: make skb_put_zero() return voidJohannes Berg1-2/+2
It's nicer to return void, since then there's no need to cast to any structures. Currently none of the users have a cast, but a number of future conversions do. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15tls: kernel TLS supportDave Watson3-0/+317
Software implementation of transport layer security, implemented using ULP infrastructure. tcp proto_ops are replaced with tls equivalents of sendmsg and sendpage. Only symmetric crypto is done in the kernel, keys are passed by setsockopt after the handshake is complete. All control messages are supported via CMSG data - the actual symmetric encryption is the same, just the message type needs to be passed separately. For user API, please see Documentation patch. Pieces that can be shared between hw and sw implementation are in tls_main.c Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15tcp: export do_tcp_sendpages and tcp_rate_check_app_limited functionsDave Watson1-0/+2
Export do_tcp_sendpages and tcp_rate_check_app_limited, since tls will need to sendpages while the socket is already locked. tcp_sendpage is exported, but requires the socket lock to not be held already. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15tcp: ULP infrastructureDave Watson3-0/+30
Add the infrustructure for attaching Upper Layer Protocols (ULPs) over TCP sockets. Based on a similar infrastructure in tcp_cong. The idea is that any ULP can add its own logic by changing the TCP proto_ops structure to its own methods. Example usage: setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls")); modules will call: tcp_register_ulp(&tcp_tls_ulp_ops); to register/unregister their ulp, with an init function and name. A list of registered ulps will be returned by tcp_get_available_ulp, which is hooked up to /proc. Example: $ cat /proc/sys/net/ipv4/tcp_available_ulp tls There is currently no functionality to remove or chain ULPs, but it should be possible to add these in the future if needed. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller16-23/+83
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-7/+15
Pull networking fixes from David Miller: 1) The netlink attribute passed in to dev_set_alias() is not necessarily NULL terminated, don't use strlcpy() on it. From Alexander Potapenko. 2) Fix implementation of atomics in arm64 bpf JIT, from Daniel Borkmann. 3) Correct the release of netdevs and driver private data in certain circumstances. 4) Sanitize netlink message length properly in decnet, from Mateusz Jurczyk. 5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From Yuval Mintz. 6) Hash secret is never initialized in ipv6 ILA translation code, from Arnd Bergmann. I guess those clang warnings about unused inline functions are useful for something! 7) Fix endian selection in bpf_endian.h, from Daniel Borkmann. 8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX and CAIF. From Mateusz Jurczyk. 9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario Molitor. 10) Do not leak netdev on dev_alloc_name() errors in mac80211, from Johannes Berg. 11) Fix locking in sctp_for_each_endpoint(), from Xin Long. 12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle. 13) Fix use after free in ip_mc_clear_src(), from WANG Cong. 14) Fix regressions caused by ICMP rate limiting changes in 4.11, from Jesper Dangaard Brouer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) i40e: Fix a sleep-in-atomic bug net: don't global ICMP rate limit packets originating from loopback net/act_pedit: fix an error code net: update undefined ->ndo_change_mtu() comment net_sched: move tcf_lock down after gen_replace_estimator() caif: Add sockaddr length check before accessing sa_family in connect handler qed: fix dump of context data qmi_wwan: new Telewell and Sierra device IDs net: phy: Fix MDIO_THUNDER dependencies netconsole: Remove duplicate "netconsole: " logging prefix igmp: acquire pmc lock for ip_mc_clear_src() r8152: give the device version net: rps: fix uninitialized symbol warning mac80211: don't send SMPS action frame in AP mode when not needed mac80211/wpa: use constant time memory comparison for MACs mac80211: set bss_info data before configuring the channel mac80211: remove 5/10 MHz rate code from station MLME mac80211: Fix incorrect condition when checking rx timestamp mac80211: don't look at the PM bit of BAR frames i40e: fix handling of HW ATR eviction ...
2017-06-15Merge tag 'acpi-4.12-rc6' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert an ACPICA commit from the 4.11 cycle that causes problems to happen on some systems and add a protection against possible kernel crashes due to table reference counter imbalance. Specifics: - Revert a 4.11 ACPICA change that made assumptions which are not satisfied on some systems and caused the enumeration of resources to fail on them (Rafael Wysocki). - Add a mechanism to prevent tables from being unmapped prematurely due to reference counter overflows (Lv Zheng)" * tag 'acpi-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
2017-06-15Merge tag 'media/v4.12-3' of ↵Linus Torvalds2-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some build dependency issues at CEC core with randconfigs - fix an off by one error at vb2 - a race fix at cec core - driver fixes at tc358743, sir_ir and rainshadow-cec * tag 'media/v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED [media] cec: race fix: don't return -ENONET in cec_receive() [media] sir_ir: infinite loop in interrupt handler [media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE [media] cec: improve MEDIA_CEC_RC dependencies [media] vb2: Fix an off by one error in 'vb2_plane_vaddr' [media] rainshadow-cec: Fix missing spin_lock_init() [media] tc358743: fix register i2c_rd/wr function fix
2017-06-15Merge branch 'acpica-fixes'Rafael J. Wysocki1-0/+14
* acpica-fixes: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
2017-06-14net: update undefined ->ndo_change_mtu() commentMagnus Damm1-2/+1
Update ->ndo_change_mtu() callback comment to remove text about returning error in case of undefined callback. This change makes the comment match the existing code behavior. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14bpf: permits narrower load from bpf program context fieldsYonghong Song2-1/+2
Currently, verifier will reject a program if it contains an narrower load from the bpf context structure. For example, __u8 h = __sk_buff->hash, or __u16 p = __sk_buff->protocol __u32 sample_period = bpf_perf_event_data->sample_period which are narrower loads of 4-byte or 8-byte field. This patch solves the issue by: . Introduce a new parameter ctx_field_size to carry the field size of narrower load from prog type specific *__is_valid_access validator back to verifier. . The non-zero ctx_field_size for a memory access indicates (1). underlying prog type specific convert_ctx_accesses supporting non-whole-field access (2). the current insn is a narrower or whole field access. . In verifier, for such loads where load memory size is less than ctx_field_size, verifier transforms it to a full field load followed by proper masking. . Currently, __sk_buff and bpf_perf_event_data->sample_period are supporting narrowing loads. . Narrower stores are still not allowed as typical ctx stores are just normal stores. Because of this change, some tests in verifier will fail and these tests are removed. As a bonus, rename some out of bound __sk_buff->cb access to proper field name and remove two redundant "skb cb oob" tests. Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Associate slave network device with CPU portFlorian Fainelli1-0/+1
In preparation for supporting multiple CPU ports with DSA, have the dsa_port structure know which CPU it is associated with. This will be important in order to make sure the correct CPU is used for transmission of the frames. If not for functional reasons, for performance (e.g: load balancing) and forwarding decisions. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Relocate master ethtool operationsFlorian Fainelli1-12/+5
Relocate master_ethtool_ops and master_orig_ethtool_ops into struct dsa_port in order to be both consistent, and make things self contained within the dsa_port structure. This is a preliminary change to supporting multiple CPU port interfaces. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Remove master_netdev and use dst->cpu_dp->netdevFlorian Fainelli1-5/+0
In preparation for supporting multiple CPU ports, remove dst->master_netdev and ds->master_netdev and replace them with only one instance of the common object we have for a port: struct dsa_port::netdev. ds->master_netdev is currently write only and would be helpful in the case where we have two switches, both with CPU ports, and also connected within each other, which the multi-CPU port patch series would address. While at it, introduce a helper function used in net/dsa/slave.c to immediately get a reference on the master network device called dsa_master_netdev(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13of_mdio: move of_mdio_parse_addr to header fileJon Mason1-1/+23
The of_mdio_parse_addr() helper function is useful to other code, but the module dependency chain causes issues. To work around this, we can move of_mdio_parse_addr() to be an inline function in the header file. This gets rid of the dependencies and still allows for the reuse of code. Reported-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13Merge tag 'mac80211-next-for-davem-2017-06-13' of ↵David S. Miller5-8/+157
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A couple of weeks worth of updates - looks like things are quiet: * merged net-next back to get a patch from net that another patch here depends on * various small improvements/cleanups across the board * 4-way handshake offload (many thanks to Arend for shepherding that) * mesh CSA/DFS support in mac80211 * the skb_put_zero() we discussed previously ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: phy: Make phy_ethtool_ksettings_get return voidyuval.shaia@oracle.com1-2/+2
Make return value void since function never return meaningfull value Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13mdio_bus: handle only single PHY reset GPIOSergei Shtylyov1-4/+2
Commit 4c5e7a2c0501 ("dt-bindings: mdio: Clarify binding document") declared that a MDIO reset GPIO property should have only a single GPIO reference/specifier, however the supporting code was left intact, still burdening the kernel with now apparently useless loops -- get rid of them. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13nl80211: remove desciption about request from NL80211_CMD_ROAMArend Van Spriel1-8/+7
The description of NL80211_CMD_ROAM indicated possibility for a request to roam issued by user-space. However, it also states that as not being implemented right now. This has been so since commit b23aa676ab9d ("cfg80211: connect/disconnect API") added in 2009. So it seems safe to assume it will not be added any time soon and thus remove it. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13nl80211: add authorized flag to ROAM eventAvraham Stern2-0/+15
Drivers that initiate roaming while being connected to a network that uses 802.1X authentication need to inform user space if 802.1X authentication is further required after roaming. For example, when using the Fast transition protocol, roaming within the mobility domain does not require new 802.1X authentication, but roaming to another mobility domain does. In addition, some drivers may not support 802.1X authentication (so it has to be done in user space), while other drivers do. Add a flag to the roaming notification to indicate if user space is required to do 802.1X authentication after the roaming or not. This flag will only be used for networks that use 802.1X authentication. For networks that do not use 802.1X authentication it is assumed that no further action is required from user space after the roaming notification. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [arend.vanspriel@broadcom.com reuse NL80211_ATTR_PORT_AUTHORIZED] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [rebase to apply w/o the flag in CONNECT] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13cfg80211: support 4-way handshake offloading for 802.1XAvraham Stern3-1/+73
Add API for setting the PMK to the driver. For FT support, allow setting also the PMK-R0 Name. This can be used by drivers that support 4-Way handshake offload while IEEE802.1X authentication is managed by upper layers. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [arend.vanspriel@broadcom.com: add WANT_1X_4WAY_HS attribute] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X docs a bit to say that the device may require it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13cfg80211: support 4-way handshake offloading for WPA/WPA2-PSKEliad Peller3-2/+23
Let drivers advertise support for station-mode 4-way handshake offloading with a new NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag. Extend use of NL80211_ATTR_PMK attribute indicating it might be passed as part of NL80211_CMD_CONNECT command, and contain the PSK (which is the PMK, hence the name.) The driver/device is assumed to handle the 4-way handshake by itself in this case (including key derivations, etc.), instead of relying on the supplicant. This patch is somewhat based on this one (by Vladimir Kondratiev): https://patchwork.kernel.org/patch/1309561/. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [arend.vanspriel@broadcom.com rebase dealing with existing ATTR_PMK] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK docs to indicate that this offload might be required] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-12udp: avoid a cache miss on dequeuePaolo Abeni1-0/+2
Since UDP no more uses sk->destructor, we can clear completely the skb head state before enqueuing. Amend and use skb_release_head_state() for that. All head states share a single cacheline, which is not normally used/accesses on dequeue. We can avoid entirely accessing such cacheline implementing and using in the UDP code a specialized skb free helper which ignores the skb head state. This saves a cacheline miss at skb deallocation time. v1 -> v2: replaced secpath_reset() with skb_release_head_state() Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12net: factor out a helper to decrement the skb refcountPaolo Abeni1-0/+13
The same code is replicated in 3 different places; move it to a common helper. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalanceLv Zheng1-0/+14
Considering this case: 1. A program opens a sysfs table file 65535 times, it can increase validation_count and first increment cause the table to be mapped: validation_count = 65535 2. AML execution causes "Load" to be executed on the same table, this time it cannot increase validation_count, so validation_count remains: validation_count = 65535 3. The program closes sysfs table file 65535 times, it can decrease validation_count and the last decrement cause the table to be unmapped: validation_count = 0 4. AML code still accessing the loaded table, kernel crash can be observed. To prevent that from happening, add a validation_count threashold. When it is reached, the validation_count can no longer be incremented/decremented to invalidate the table descriptor (means preventing table unmappings) Note that code added in acpi_tb_put_table() is actually a no-op but changes the warning message into a "warn once" one. Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog, comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-11Merge branch 'for-linus' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull key subsystem fixes from James Morris: "Here are a bunch of fixes for Linux keyrings, including: - Fix up the refcount handling now that key structs use the refcount_t type and the refcount_t ops don't allow a 0->1 transition. - Fix a potential NULL deref after error in x509_cert_parse(). - Don't put data for the crypto algorithms to use on the stack. - Fix the handling of a null payload being passed to add_key(). - Fix incorrect cleanup an uninitialised key_preparsed_payload in key_update(). - Explicit sanitisation of potentially secure data before freeing. - Fixes for the Diffie-Helman code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) KEYS: fix refcount_inc() on zero KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API crypto : asymmetric_keys : verify_pefile:zero memory content before freeing KEYS: DH: add __user annotations to keyctl_kdf_params KEYS: DH: ensure the KDF counter is properly aligned KEYS: DH: don't feed uninitialized "otherinfo" into KDF KEYS: DH: forbid using digest_null as the KDF hash KEYS: sanitize key structs before freeing KEYS: trusted: sanitize all key material KEYS: encrypted: sanitize all key material KEYS: user_defined: sanitize key payloads KEYS: sanitize add_key() and keyctl() key payloads KEYS: fix freeing uninitialized memory in key_update() KEYS: fix dereferencing NULL payload with nonzero length KEYS: encrypted: use constant-time HMAC comparison KEYS: encrypted: fix race causing incorrect HMAC calculations KEYS: encrypted: fix buffer overread in valid_master_desc() KEYS: encrypted: avoid encrypting/decrypting stack buffers KEYS: put keyring if install_session_keyring_to_cred() fails KEYS: Delete an error message for a failed memory allocation in get_derived_key() ...
Powered by cgit, Gruvboxed by Blaster4385.