| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add __stack_depot_save(), which provides more fine-grained control over
stackdepot's memory allocation behaviour, in case stackdepot runs out of
"stack slabs".
Normally stackdepot uses alloc_pages() in case it runs out of space;
passing can_alloc==false to __stack_depot_save() prohibits this, at the
cost of more likely failure to record a stack trace.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Marco Elver <[email protected]>
Tested-by: Shuah Khan <[email protected]>
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: "Gustavo A. R. Silva" <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Taras Madan <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vijayanand Jitta <[email protected]>
Cc: Vinayak Menon <[email protected]>
Cc: Walter Wu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "stackdepot, kasan, workqueue: Avoid expanding stackdepot
slabs when holding raw_spin_lock", v2.
Shuah Khan reported [1]:
| When CONFIG_PROVE_RAW_LOCK_NESTING=y and CONFIG_KASAN are enabled,
| kasan_record_aux_stack() runs into "BUG: Invalid wait context" when
| it tries to allocate memory attempting to acquire spinlock in page
| allocation code while holding workqueue pool raw_spinlock.
|
| There are several instances of this problem when block layer tries
| to __queue_work(). Call trace from one of these instances is below:
|
| kblockd_mod_delayed_work_on()
| mod_delayed_work_on()
| __queue_delayed_work()
| __queue_work() (rcu_read_lock, raw_spin_lock pool->lock held)
| insert_work()
| kasan_record_aux_stack()
| kasan_save_stack()
| stack_depot_save()
| alloc_pages()
| __alloc_pages()
| get_page_from_freelist()
| rm_queue()
| rm_queue_pcplist()
| local_lock_irqsave(&pagesets.lock, flags);
| [ BUG: Invalid wait context triggered ]
PROVE_RAW_LOCK_NESTING is pointing out that (on RT kernels) the locking
rules are being violated. More generally, memory is being allocated
from a non-preemptive context (raw_spin_lock'd c-s) where it is not
allowed.
To properly fix this, we must prevent stackdepot from replenishing its
"stack slab" pool if memory allocations cannot be done in the current
context: it's a bug to use either GFP_ATOMIC nor GFP_NOWAIT in certain
non-preemptive contexts, including raw_spin_locks (see gfp.h and commit
ab00db216c9c7).
The only downside is that saving a stack trace may fail if: stackdepot
runs out of space AND the same stack trace has not been recorded before.
I expect this to be unlikely, and a simple experiment (boot the kernel)
didn't result in any failure to record stack trace from insert_work().
The series includes a few minor fixes to stackdepot that I noticed in
preparing the series. It then introduces __stack_depot_save(), which
exposes the option to force stackdepot to not allocate any memory.
Finally, KASAN is changed to use the new stackdepot interface and
provide kasan_record_aux_stack_noalloc(), which is then used by
workqueue code.
[1] https://lkml.kernel.org/r/[email protected]
This patch (of 6):
<linux/stackdepot.h> refers to gfp_t, but doesn't include gfp.h.
Fix it by including <linux/gfp.h>.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Marco Elver <[email protected]>
Tested-by: Shuah Khan <[email protected]>
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Walter Wu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Vijayanand Jitta <[email protected]>
Cc: Vinayak Menon <[email protected]>
Cc: "Gustavo A. R. Silva" <[email protected]>
Cc: Taras Madan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Not required at all, and having this causes a huge kernel rebuild as
soon as something in dax.h changes.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
With CONFIG_SLUB_CPU_PARTIAL enabled, SLUB keeps a percpu list of
partial slabs that can be promoted to cpu slab when the previous one is
depleted, without accessing the shared partial list. A slab can be
added to this list by 1) refill of an empty list from get_partial_node()
- once we really have to access the shared partial list, we acquire
multiple slabs to amortize the cost of locking, and 2) first free to a
previously full slab - instead of putting the slab on a shared partial
list, we can more cheaply freeze it and put it on the per-cpu list.
To control how large a percpu partial list can grow for a kmem cache,
set_cpu_partial() calculates a target number of free objects on each
cpu's percpu partial list, and this can be also set by the sysfs file
cpu_partial.
However, the tracking of actual number of objects is imprecise, in order
to limit overhead from cpu X freeing an objects to a slab on percpu
partial list of cpu Y. Basically, the percpu partial slabs form a
single linked list, and when we add a new slab to the list with current
head "oldpage", we set in the struct page of the slab we're adding:
page->pages = oldpage->pages + 1; // this is precise
page->pobjects = oldpage->pobjects + (page->objects - page->inuse);
page->next = oldpage;
Thus the real number of free objects in the slab (objects - inuse) is
only determined at the moment of adding the slab to the percpu partial
list, and further freeing doesn't update the pobjects counter nor
propagate it to the current list head. As Jann reports [1], this can
easily lead to large inaccuracies, where the target number of objects
(up to 30 by default) can translate to the same number of (empty) slab
pages on the list. In case 2) above, we put a slab with 1 free object
on the list, thus only increase page->pobjects by 1, even if there are
subsequent frees on the same slab. Jann has noticed this in practice
and so did we [2] when investigating significant increase of kmemcg
usage after switching from SLAB to SLUB.
While this is no longer a problem in kmemcg context thanks to the
accounting rewrite in 5.9, the memory waste is still not ideal and it's
questionable whether it makes sense to perform free object count based
control when object counts can easily become so much inaccurate. So
this patch converts the accounting to be based on number of pages only
(which is precise) and removes the page->pobjects field completely.
This is also ultimately simpler.
To retain the existing set_cpu_partial() heuristic, first calculate the
target number of objects as previously, but then convert it to target
number of pages by assuming the pages will be half-filled on average.
This assumption might obviously also be inaccurate in practice, but
cannot degrade to actual number of pages being equal to the target
number of objects.
We could also skip the intermediate step with target number of objects
and rewrite the heuristic in terms of pages. However we still have the
sysfs file cpu_partial which uses number of objects and could break
existing users if it suddenly becomes number of pages, so this patch
doesn't do that.
In practice, after this patch the heuristics limit the size of percpu
partial list up to 2 pages. In case of a reported regression (which
would mean some workload has benefited from the previous imprecise
object based counting), we can tune the heuristics to get a better
compromise within the new scheme, while still avoid the unexpectedly
long percpu partial lists.
[1] https://lore.kernel.org/linux-mm/CAG48ez2Qx5K1Cab-m8BdSibp6wLTip6ro4=-umR7BLsEgjEYzA@mail.gmail.com/
[2] https://lore.kernel.org/all/[email protected]/
==========
Evaluation
==========
Mel was kind enough to run v1 through mmtests machinery for netperf
(localhost) and hackbench and, for most significant results see below.
So there are some apparent regressions, especially with hackbench, which
I think ultimately boils down to having shorter percpu partial lists on
average and some benchmarks benefiting from longer ones. Monitoring
slab usage also indicated less memory usage by slab. Based on that, the
following patch will bump the defaults to allow longer percpu partial
lists than after this patch.
However the goal is certainly not such that we would limit the percpu
partial lists to 30 pages just because previously a specific alloc/free
pattern could lead to the limit of 30 objects translate to a limit to 30
pages - that would make little sense. This is a correctness patch, and
if a workload benefits from larger lists, the sysfs tuning knobs are
still there to allow that.
Netperf
2-socket Intel(R) Xeon(R) Gold 5218R CPU @ 2.10GHz (20 cores, 40 threads per socket), 384GB RAM
TCP-RR:
hmean before 127045.79 after 121092.94 (-4.69%, worse)
stddev before 2634.37 after 1254.08
UDP-RR:
hmean before 166985.45 after 160668.94 ( -3.78%, worse)
stddev before 4059.69 after 1943.63
2-socket Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz (20 cores, 40 threads per socket), 512GB RAM
TCP-RR:
hmean before 84173.25 after 76914.72 ( -8.62%, worse)
UDP-RR:
hmean before 93571.12 after 96428.69 ( 3.05%, better)
stddev before 23118.54 after 16828.14
2-socket Intel(R) Xeon(R) CPU E5-2670 v3 @ 2.30GHz (12 cores, 24 threads per socket), 64GB RAM
TCP-RR:
hmean before 49984.92 after 48922.27 ( -2.13%, worse)
stddev before 6248.15 after 4740.51
UDP-RR:
hmean before 61854.31 after 68761.81 ( 11.17%, better)
stddev before 4093.54 after 5898.91
other machines - within 2%
Hackbench
(results before and after the patch, negative % means worse)
2-socket AMD EPYC 7713 (64 cores, 128 threads per core), 256GB RAM
hackbench-process-sockets
Amean 1 0.5380 0.5583 ( -3.78%)
Amean 4 0.7510 0.8150 ( -8.52%)
Amean 7 0.7930 0.9533 ( -20.22%)
Amean 12 0.7853 1.1313 ( -44.06%)
Amean 21 1.1520 1.4993 ( -30.15%)
Amean 30 1.6223 1.9237 ( -18.57%)
Amean 48 2.6767 2.9903 ( -11.72%)
Amean 79 4.0257 5.1150 ( -27.06%)
Amean 110 5.5193 7.4720 ( -35.38%)
Amean 141 7.2207 9.9840 ( -38.27%)
Amean 172 8.4770 12.1963 ( -43.88%)
Amean 203 9.6473 14.3137 ( -48.37%)
Amean 234 11.3960 18.7917 ( -64.90%)
Amean 265 13.9627 22.4607 ( -60.86%)
Amean 296 14.9163 26.0483 ( -74.63%)
hackbench-thread-sockets
Amean 1 0.5597 0.5877 ( -5.00%)
Amean 4 0.7913 0.8960 ( -13.23%)
Amean 7 0.8190 1.0017 ( -22.30%)
Amean 12 0.9560 1.1727 ( -22.66%)
Amean 21 1.7587 1.5660 ( 10.96%)
Amean 30 2.4477 1.9807 ( 19.08%)
Amean 48 3.4573 3.0630 ( 11.41%)
Amean 79 4.7903 5.1733 ( -8.00%)
Amean 110 6.1370 7.4220 ( -20.94%)
Amean 141 7.5777 9.2617 ( -22.22%)
Amean 172 9.2280 11.0907 ( -20.18%)
Amean 203 10.2793 13.3470 ( -29.84%)
Amean 234 11.2410 17.1070 ( -52.18%)
Amean 265 12.5970 23.3323 ( -85.22%)
Amean 296 17.1540 24.2857 ( -41.57%)
2-socket Intel(R) Xeon(R) Gold 5218R CPU @ 2.10GHz (20 cores, 40 threads
per socket), 384GB RAM
hackbench-process-sockets
Amean 1 0.5760 0.4793 ( 16.78%)
Amean 4 0.9430 0.9707 ( -2.93%)
Amean 7 1.5517 1.8843 ( -21.44%)
Amean 12 2.4903 2.7267 ( -9.49%)
Amean 21 3.9560 4.2877 ( -8.38%)
Amean 30 5.4613 5.8343 ( -6.83%)
Amean 48 8.5337 9.2937 ( -8.91%)
Amean 79 14.0670 15.2630 ( -8.50%)
Amean 110 19.2253 21.2467 ( -10.51%)
Amean 141 23.7557 25.8550 ( -8.84%)
Amean 172 28.4407 29.7603 ( -4.64%)
Amean 203 33.3407 33.9927 ( -1.96%)
Amean 234 38.3633 39.1150 ( -1.96%)
Amean 265 43.4420 43.8470 ( -0.93%)
Amean 296 48.3680 48.9300 ( -1.16%)
hackbench-thread-sockets
Amean 1 0.6080 0.6493 ( -6.80%)
Amean 4 1.0000 1.0513 ( -5.13%)
Amean 7 1.6607 2.0260 ( -22.00%)
Amean 12 2.7637 2.9273 ( -5.92%)
Amean 21 5.0613 4.5153 ( 10.79%)
Amean 30 6.3340 6.1140 ( 3.47%)
Amean 48 9.0567 9.5577 ( -5.53%)
Amean 79 14.5657 15.7983 ( -8.46%)
Amean 110 19.6213 21.6333 ( -10.25%)
Amean 141 24.1563 26.2697 ( -8.75%)
Amean 172 28.9687 30.2187 ( -4.32%)
Amean 203 33.9763 34.6970 ( -2.12%)
Amean 234 38.8647 39.3207 ( -1.17%)
Amean 265 44.0813 44.1507 ( -0.16%)
Amean 296 49.2040 49.4330 ( -0.47%)
2-socket Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz (20 cores, 40 threads
per socket), 512GB RAM
hackbench-process-sockets
Amean 1 0.5027 0.5017 ( 0.20%)
Amean 4 1.1053 1.2033 ( -8.87%)
Amean 7 1.8760 2.1820 ( -16.31%)
Amean 12 2.9053 3.1810 ( -9.49%)
Amean 21 4.6777 4.9920 ( -6.72%)
Amean 30 6.5180 6.7827 ( -4.06%)
Amean 48 10.0710 10.5227 ( -4.48%)
Amean 79 16.4250 17.5053 ( -6.58%)
Amean 110 22.6203 24.4617 ( -8.14%)
Amean 141 28.0967 31.0363 ( -10.46%)
Amean 172 34.4030 36.9233 ( -7.33%)
Amean 203 40.5933 43.0850 ( -6.14%)
Amean 234 46.6477 48.7220 ( -4.45%)
Amean 265 53.0530 53.9597 ( -1.71%)
Amean 296 59.2760 59.9213 ( -1.09%)
hackbench-thread-sockets
Amean 1 0.5363 0.5330 ( 0.62%)
Amean 4 1.1647 1.2157 ( -4.38%)
Amean 7 1.9237 2.2833 ( -18.70%)
Amean 12 2.9943 3.3110 ( -10.58%)
Amean 21 4.9987 5.1880 ( -3.79%)
Amean 30 6.7583 7.0043 ( -3.64%)
Amean 48 10.4547 10.8353 ( -3.64%)
Amean 79 16.6707 17.6790 ( -6.05%)
Amean 110 22.8207 24.4403 ( -7.10%)
Amean 141 28.7090 31.0533 ( -8.17%)
Amean 172 34.9387 36.8260 ( -5.40%)
Amean 203 41.1567 43.0450 ( -4.59%)
Amean 234 47.3790 48.5307 ( -2.43%)
Amean 265 53.9543 54.6987 ( -1.38%)
Amean 296 60.0820 60.2163 ( -0.22%)
1-socket Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz (4 cores, 8 threads),
32 GB RAM
hackbench-process-sockets
Amean 1 1.4760 1.5773 ( -6.87%)
Amean 3 3.9370 4.0910 ( -3.91%)
Amean 5 6.6797 6.9357 ( -3.83%)
Amean 7 9.3367 9.7150 ( -4.05%)
Amean 12 15.7627 16.1400 ( -2.39%)
Amean 18 23.5360 23.6890 ( -0.65%)
Amean 24 31.0663 31.3137 ( -0.80%)
Amean 30 38.7283 39.0037 ( -0.71%)
Amean 32 41.3417 41.6097 ( -0.65%)
hackbench-thread-sockets
Amean 1 1.5250 1.6043 ( -5.20%)
Amean 3 4.0897 4.2603 ( -4.17%)
Amean 5 6.7760 7.0933 ( -4.68%)
Amean 7 9.4817 9.9157 ( -4.58%)
Amean 12 15.9610 16.3937 ( -2.71%)
Amean 18 23.9543 24.3417 ( -1.62%)
Amean 24 31.4400 31.7217 ( -0.90%)
Amean 30 39.2457 39.5467 ( -0.77%)
Amean 32 41.8267 42.1230 ( -0.71%)
2-socket Intel(R) Xeon(R) CPU E5-2670 v3 @ 2.30GHz (12 cores, 24 threads
per socket), 64GB RAM
hackbench-process-sockets
Amean 1 1.0347 1.0880 ( -5.15%)
Amean 4 1.7267 1.8527 ( -7.30%)
Amean 7 2.6707 2.8110 ( -5.25%)
Amean 12 4.1617 4.3383 ( -4.25%)
Amean 21 7.0070 7.2600 ( -3.61%)
Amean 30 9.9187 10.2397 ( -3.24%)
Amean 48 15.6710 16.3923 ( -4.60%)
Amean 79 24.7743 26.1247 ( -5.45%)
Amean 110 34.3000 35.9307 ( -4.75%)
Amean 141 44.2043 44.8010 ( -1.35%)
Amean 172 54.2430 54.7260 ( -0.89%)
Amean 192 60.6557 60.9777 ( -0.53%)
hackbench-thread-sockets
Amean 1 1.0610 1.1353 ( -7.01%)
Amean 4 1.7543 1.9140 ( -9.10%)
Amean 7 2.7840 2.9573 ( -6.23%)
Amean 12 4.3813 4.4937 ( -2.56%)
Amean 21 7.3460 7.5350 ( -2.57%)
Amean 30 10.2313 10.5190 ( -2.81%)
Amean 48 15.9700 16.5940 ( -3.91%)
Amean 79 25.3973 26.6637 ( -4.99%)
Amean 110 35.1087 36.4797 ( -3.91%)
Amean 141 45.8220 46.3053 ( -1.05%)
Amean 172 55.4917 55.7320 ( -0.43%)
Amean 192 62.7490 62.5410 ( 0.33%)
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vlastimil Babka <[email protected]>
Reported-by: Jann Horn <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Not all files in the kernel should include mm.h. Migrating callers from
kmalloc to kvmalloc is easier if the kvmalloc functions are in slab.h.
[[email protected]: move the new kvrealloc() also]
[[email protected]: drivers/hwmon/occ/p9_sbe.c needs slab.h]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch is to fix an out-of-bound access issue when jit-ing the
bpf_pseudo_func insn (i.e. ld_imm64 with src_reg == BPF_PSEUDO_FUNC)
In jit_subprog(), it currently reuses the subprog index cached in
insn[1].imm. This subprog index is an index into a few array related
to subprogs. For example, in jit_subprog(), it is an index to the newly
allocated 'struct bpf_prog **func' array.
The subprog index was cached in insn[1].imm after add_subprog(). However,
this could become outdated (and too big in this case) if some subprogs
are completely removed during dead code elimination (in
adjust_subprog_starts_after_remove). The cached index in insn[1].imm
is not updated accordingly and causing out-of-bound issue in the later
jit_subprog().
Unlike bpf_pseudo_'func' insn, the current bpf_pseudo_'call' insn
is handling the DCE properly by calling find_subprog(insn->imm) to
figure out the index instead of caching the subprog index.
The existing bpf_adj_branches() will adjust the insn->imm
whenever insn is added or removed.
Instead of having two ways handling subprog index,
this patch is to make bpf_pseudo_func works more like
bpf_pseudo_call.
First change is to stop caching the subprog index result
in insn[1].imm after add_subprog(). The verification
process will use find_subprog(insn->imm) to figure
out the subprog index.
Second change is in bpf_adj_branches() and have it to
adjust the insn->imm for the bpf_pseudo_func insn also
whenever insn is added or removed.
Third change is in jit_subprog(). Like the bpf_pseudo_call handling,
bpf_pseudo_func temporarily stores the find_subprog() result
in insn->off. It is fine because the prog's insn has been finalized
at this point. insn->off will be reset back to 0 later to avoid
confusing the userspace prog dump tool.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Pull the label from the fattr instead.
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
And usethe fattr's label field instead. I also adjust function calls to
remove labels along the way.
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Again, use the fattr's label field instead.
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Instead, use the label embedded in the attached fattr.
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
And instead allocate the fattr using nfs_alloc_fattr_with_label()
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
For creating fattrs with the label field already allocated for us. I
also update nfs_free_fattr() to free the label in the end.
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
- Make of_phandle_args_to_fwspec() generally available (Marc Zyngier)
- Allow matching of interrupt-maps local to interrupt controller or PCI
device (Marc Zyngier)
- Add Apple SoC (e.g., M1) PCIe host controller driver, which enables
access to USB type-A, Ethernet, Wi-Fi, Bluetooth devices; these require
additional drivers of their own (Alyssa Rosenzweig)
- Add apple INTx, per-port, and MSI interrupt support (Marc Zyngier)
- Configure apple Requester-ID-to-Stream-ID mapper for IOMMU (DART) support
(Marc Zyngier)
* pci/host/apple:
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
|
|
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek
Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at
startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge" instead of
the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement this per
spec (Pali Rohár)
* remotes/lorenzo/pci/aardvark:
PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge
PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridge
PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge
PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridge
PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG
PCI: aardvark: Fix return value of MSI domain .alloc() method
PCI: pci-bridge-emul: Fix emulation of W1C bits
PCI: aardvark: Fix reporting Data Link Layer Link Active
PCI: aardvark: Fix checking for link up via LTSSM state
PCI: aardvark: Fix link training
PCI: aardvark: Simplify initialization of rootcap on virtual bridge
PCI: aardvark: Implement re-issuing config requests on CRS response
PCI: aardvark: Deduplicate code in advk_pcie_rd_conf()
PCI: aardvark: Do not unmask unused interrupts
PCI: aardvark: Do not clear status bits of masked interrupts
PCI: aardvark: Fix configuring Reference clock
PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridge
PCI: aardvark: Don't spam about PIO Response Status
PCI: aardvark: Fix PCIe Max Payload Size setting
PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros
|
|
- Tidy setup-irq.c comments (Pranay Sanghai)
- Fix misspellings (Krzysztof Wilczyński)
- Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński)
- Tidy cpqphp code formatting (Krzysztof Wilczyński)
- Remove unused pci_pool wrappers, which have been replaced by dma_pool
(Cai Huoqing)
- Remove a redundant initialization in __pci_reset_function_locked() (Colin
Ian King)
- Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński)
- Include generic <linux/> headers instead of <asm/> for cpqphp and vmd
(Krzysztof Wilczyński)
* pci/misc:
PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h>
PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h>
MAINTAINERS: Update PCI subsystem information
PCI: Prefer 'unsigned int' over bare 'unsigned'
PCI: Remove redundant 'rc' initialization
PCI: Remove unused pci_pool wrappers
PCI: cpqphp: Format if-statement code block correctly
PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path()
PCI: hv: Remove unnecessary use of %hx
PCI: Correct misspelled and remove duplicated words
PCI: Tidy comments
|
|
- Add pci_read_vpd_any(), pci_write_vpd_any() to access VPD at arbitrary
offsets (Heiner Kallweit)
- Use VPD API to replace custom code in cxgb3 driver (Heiner Kallweit)
* pci/vpd:
cxgb3: Remove seeprom_write and use VPD API
cxgb3: Use VPD API in t3_seeprom_wp()
cxgb3: Remove t3_seeprom_read and use VPD API
PCI/VPD: Use pci_read_vpd_any() in pci_vpd_size()
PCI/VPD: Add pci_read/write_vpd_any()
|
|
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable, etc
(Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID (Kelvin
Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin
Cao)
- Add check of event support (Logan Gunthorpe)
* pci/switchtec:
PCI/switchtec: Add check of event support
PCI/switchtec: Replace ENOTSUPP with EOPNOTSUPP
PCI/switchtec: Update the way of getting management VEP instance ID
PCI/switchtec: Fix a MRPC error status handling issue
PCI/switchtec: Error out MRPC execution when MMIO reads fail
|
|
- Drop the struct pci_dev.driver pointer, which is redundant with the
struct device.driver pointer (Uwe Kleine-König)
* pci/driver:
PCI: Remove struct pci_dev->driver
PCI: Use to_pci_driver() instead of pci_dev->driver
x86/pci/probe_roms: Use to_pci_driver() instead of pci_dev->driver
perf/x86/intel/uncore: Use to_pci_driver() instead of pci_dev->driver
powerpc/eeh: Use to_pci_driver() instead of pci_dev->driver
usb: xhci: Use to_pci_driver() instead of pci_dev->driver
cxl: Use to_pci_driver() instead of pci_dev->driver
cxl: Factor out common dev->driver expressions
xen/pcifront: Use to_pci_driver() instead of pci_dev->driver
xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrv
nfp: use dev_driver_string() instead of pci_dev->driver->name
mlxsw: pci: Use dev_driver_string() instead of pci_dev->driver->name
net: marvell: prestera: use dev_driver_string() instead of pci_dev->driver->name
net: hns3: use dev_driver_string() instead of pci_dev->driver->name
crypto: hisilicon - use dev_driver_string() instead of pci_dev->driver->name
powerpc/eeh: Use dev_driver_string() instead of struct pci_dev->driver->name
ssb: Use dev_driver_string() instead of pci_dev->driver->name
bcma: simplify reference to driver name
crypto: qat - simplify adf_enable_aer()
scsi: message: fusion: Remove unused mpt_pci driver .probe() 'id' parameter
PCI/ERR: Factor out common dev->driver expressions
PCI: Drop pci_device_probe() test of !pci_dev->driver
PCI: Drop pci_device_remove() test of pci_dev->driver
PCI: Return NULL for to_pci_driver(NULL)
|
|
- Rename pcibios_add_device() to pcibios_device_add() since it's called
from pci_device_add() (Oliver O'Halloran)
- Don't try to enable AtomicOps on VFs, since they can only be enabled on
the PF (Selvin Xavier)
* pci/enumeration:
PCI: Do not enable AtomicOps on VFs
PCI: Rename pcibios_add_device() to pcibios_device_add()
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J.
Ogorchock)
- support for new revision of the NitroKey U2F device firmware (Andrej
Shadura)
- LED handling improvements for Sony Playstation5 controllers (Roderick
Colenbrander)
- support for Apple 2021 Magic Keyboard (Alex Henrie)
- other assorted code cleanups and new device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
HID: nintendo: fix -Werror build
HID: playstation: require multicolor LED functionality
HID: u2fzero: properly handle timeouts in usb_submit_urb
HID: u2fzero: clarify error check and length calculations
HID: u2fzero: Support NitroKey U2F revision of the device
HID: wacom: Make use of the helper function devm_add_action_or_reset()
HID: wacom: Shrink critical section in `wacom_add_shared_data`
HID: nintendo: prevent needless queueing of the rumble worker
HID: nintendo: ratelimit subcommands and rumble
HID: nintendo: improve rumble performance and stability
HID: nintendo: add IMU support
HID: nintendo: add support for reading user calibration
HID: nintendo: add support for charging grip
HID: nintendo: set controller uniq to MAC
HID: nintendo: reduce device removal subcommand errors
HID: nintendo: patch hw version for userspace HID mappings
HID: nintendo: send subcommands after receiving input report
HID: nintendo: improve subcommand reliability
HID: nintendo: add rumble support
HID: nintendo: add home led support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The most interesting aspect is that we now have initial support for
the Apple pin controller as used in the M1 laptops and the iPhones
which is a step forward for using Linux efficiently on this Apple
silicon.
Core changes:
- Add infrastructure for per-parent interrupt data to support the
Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC. This is
used in all modern Apple silicon such as the M1 laptops but also in
at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML"
* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
pinctrl: add pinctrl/GPIO driver for Apple SoCs
dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
gpio: Allow per-parent interrupt data
pinctrl: tegra: Fix warnings and error
pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
pinctrl: tegra: Use correct offset for pin group
pinctrl: core: fix possible memory leak in pinctrl_enable()
pinctrl: bcm2835: Allow building driver as a module
pinctrl: equilibrium: Fix function addition in multiple groups
pinctrl: tegra: Add pinmux support for Tegra194
pinctrl: tegra: include lpdr pin properties
pinctrl: mediatek: add support for MT7986 SoC
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: microchip sgpio: use reset driver
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
pinctrl: qcom: spmi-mpp: hardcode IRQ counts
pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
...
|
|
The ACPI_USE_BUILTIN_STDARG symbol is never set in the kernel build,
so stop checking it in include/acpi/platform/acgcc.h and drop all of
the macros depending on it (which appear to duplicate the analogous
macros from linux/stdarg.h, but in fact are never used).
Link: https://lore.kernel.org/linux-acpi/CAHk-=whCammRsz8PEbrft3M6vGjF506gkxtyGw81uGOUUvD51g@mail.gmail.com/
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
|
|
Driver was upstreamed in 2013 and never got a user, remove it.
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Some lines have an extra tab, remove them for proper visual alignment as
present on the rest of this file.
Signed-off-by: Luca Ceresoli <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Up to now tps65912_device_exit() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This update adds new regmap to support the latest EA silicon
which will be selected based on the chip and variant
information read from the device.
Signed-off-by: Carlos de Paula <[email protected]>
Reviewed-by: Adam Thomson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
|
|
'ib-mfd-misc-regulator-5.16' and 'tb-mfd-from-regulator-5.16' into ibs-for-mfd-merged
|
|
At least some implementations sleep. So mark pwm_apply_state() with a
might_sleep() to make callers aware. In the worst case this uncovers a
valid atomic user, then we revert this patch and at least gained some more
knowledge and then can work on a concept similar to
gpio_get_value/gpio_get_value_cansleep.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
The normal implementations of these functions make use of mutexes. To
make it obvious that these functions might sleep also add annotations to
the dummy implementations in the !CONFIG_PWM case.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
The huge page functionality in TTM does not work safely because PUD and
PMD entries do not have a special bit.
get_user_pages_fast() considers any page that passed pmd_huge() as
usable:
if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) ||
pmd_devmap(pmd))) {
And vmf_insert_pfn_pmd_prot() unconditionally sets
entry = pmd_mkhuge(pfn_t_pmd(pfn, prot));
eg on x86 the page will be _PAGE_PRESENT | PAGE_PSE.
As such gup_huge_pmd() will try to deref a struct page:
head = try_grab_compound_head(pmd_page(orig), refs, flags);
and thus crash.
Thomas further notices that the drivers are not expecting the struct page
to be used by anything - in particular the refcount incr above will cause
them to malfunction.
Thus everything about this is not able to fully work correctly considering
GUP_fast. Delete it entirely. It can return someday along with a proper
PMD/PUD_SPECIAL bit in the page table itself to gate GUP_fast.
Fixes: 314b6580adc5 ("drm/ttm, drm/vmwgfx: Support huge TTM pagefaults")
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Reviewed-by: Christian König <[email protected]>
[danvet: Update subject per Thomas' &Christian's review]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This reverts commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7.
It has been reported to be causing problems in Arch and Fedora bug
reports.
Reported-by: Hans de Goede <[email protected]>
Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576
Link: https://lore.kernel.org/r/[email protected]
Cc: Mathias Nyman <[email protected]>
Cc: Chris Chiu <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.16:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- fbdev: Fix double-free, Remove unused scrolling acceleration
- locking: improve logging for contented locks without backoff
- dma-buf: Add dma_resv_for_each_fence iterator, and conversion of
users
Driver Changes:
- nouveau: Various code style improvements
- bridge: HPD improvements for lt9611uxc, eDP aux-bus support for
ps8640, lvds-codec data-mapping selection support
- panels: Vivax TPC-9150, Innolux G070Y2-T02, LOGIC Technologies
LTTD800480070-L2RT, Sharp LS060T1SX01,
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014120452.2wicnt6hobu3kbwb@gilmour
|
|
This reverts commit 2d9ea39917a4e4293bc2caea902c7059a330b611.
We've got a regression report showing that the audio got broken the
device over AMD IOMMU. The conversion assumed the wrong pointer /
page mapping for the indirect mapping case, and we need to correct
this urgently, so let's revert it for now.
Fixes: 2d9ea39917a4 ("ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type")
Reported-and-tested-by: Alex Xu (Hello71) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Miscellaneous small fixes and improvements all over the place.
Nothing stands out in particular"
* tag 'for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bq25890: Fix initial setting of the F_CONV_RATE field
power: supply: bq25890: Fix race causing oops at boot
power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
power: bq25890: add return values to error messages
power: supply: axp288-charger: Simplify axp288_get_charger_health()
power: supply: axp288-charger: Remove unnecessary is_present and is_online helpers
power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig
power: supply: ab8500_bmdata: Use standard phandle
dt-bindings: power: supply: ab8500: Standard monitored-battery
power: supply: axp288_charger: Fix missing mutex_init()
power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
power: supply: max17042_battery: Clear status bits in interrupt handler
MAINTAINERS: power: supply: max17040: add entry with reviewers
MAINTAINERS: power: supply: max17042: add entry with reviewers
power: supply: max17040: fix null-ptr-deref in max17040_probe()
power: supply: rt5033_battery: Change voltage values to µV
power: supply: axp288-charger: Optimize register reading method
dt-bindings: power: Bindings for Samsung batteries
power: supply: cpcap-battery: use device_get_match_data() to simplify code
power: supply: max17042_battery: fix typo in MAX17042_IAvg_empty
...
|
|
of_phandle_args_to_fwspec() can be generally useful to code extracting a DT
of_phandle and using an irq_fwspec to use the hierarchical irqdomain API.
Make it visible to the rest of the kernel, including modules.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Alyssa Rosenzweig <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel IOMMU Updates fro Lu Baolu:
- Dump DMAR translation structure when DMA fault occurs
- An optimization in the page table manipulation code
- Use second level for GPA->HPA translation
- Various cleanups
- Arm SMMU Updates from Will
- Minor optimisations to SMMUv3 command creation and submission
- Numerous new compatible string for Qualcomm SMMUv2 implementations
- Fixes for the SWIOTLB based implemenation of dma-iommu code for
untrusted devices
- Add support for r8a779a0 to the Renesas IOMMU driver and DT matching
code for r8a77980
- A couple of cleanups and fixes for the Apple DART IOMMU driver
- Make use of generic report_iommu_fault() interface in the AMD IOMMU
driver
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits)
iommu/dma: Fix incorrect error return on iommu deferred attach
iommu/dart: Initialize DART_STREAMS_ENABLE
iommu/dma: Use kvcalloc() instead of kvzalloc()
iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable
iommu/dart: Use kmemdup instead of kzalloc and memcpy
iommu/vt-d: Avoid duplicate removing in __domain_mapping()
iommu/vt-d: Convert the return type of first_pte_in_page to bool
iommu/vt-d: Clean up unused PASID updating functions
iommu/vt-d: Delete dev_has_feat callback
iommu/vt-d: Use second level for GPA->HPA translation
iommu/vt-d: Check FL and SL capability sanity in scalable mode
iommu/vt-d: Remove duplicate identity domain flag
iommu/vt-d: Dump DMAR translation structure when DMA fault occurs
iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option
iommu/arm-smmu-qcom: Request direct mapping for modem device
iommu: arm-smmu-qcom: Add compatible for QCM2290
dt-bindings: arm-smmu: Add compatible for QCM2290 SoC
iommu/arm-smmu-qcom: Add SM6350 SMMU compatible
dt-bindings: arm-smmu: Add compatible for SM6350 SoC
iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd()
...
|
|
alloc_xenballooned_pages() and free_xenballooned_pages() are used as
direct replacements of xen_alloc_unpopulated_pages() and
xen_free_unpopulated_pages() in case CONFIG_XEN_UNPOPULATED_ALLOC isn't
defined.
Guard both functions with !CONFIG_XEN_UNPOPULATED_ALLOC and rename them
to the xen_*() variants they are replacing. This allows to remove some
ifdeffery from the xen.h header file. Adapt the prototype of the
functions to match.
Signed-off-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
Not really needed as both loff_t and sector_t are always 64-bits wide,
but this documents the different types a bit better.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.16-rc1.
Nothing major in here at all, just lots of tiny serial and tty driver
updates for various reported things, and some good cleanups. These
include:
- more good tty api cleanups from Jiri
- stm32 serial driver updates
- softlockup fix for non-preempt systems under high serial load
- rpmsg serial driver update
- 8250 drivers updates and fixes
- n_gsm line discipline fixes and updates as people are finally
starting to use it.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits)
tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description
serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE
tty: rpmsg: Define tty name via constant string literal
tty: rpmsg: Add pr_fmt() to prefix messages
tty: rpmsg: Use dev_err_probe() in ->probe()
tty: rpmsg: Unify variable used to keep an error code
tty: rpmsg: Assign returned id to a local variable
serial: stm32: push DMA RX data before suspending
serial: stm32: terminate / restart DMA transfer at suspend / resume
serial: stm32: rework RX dma initialization and release
serial: 8250_pci: Remove empty stub pci_quatech_exit()
serial: 8250_pci: Replace custom pci_match_id() implementation
serial: xilinx_uartps: Fix race condition causing stuck TX
serial: sunzilog: Mark sunzilog_putchar() __maybe_unused
Revert "tty: hvc: pass DMA capable memory to put_chars()"
Revert "virtio-console: remove unnecessary kmemdup()"
serial: 8250_pci: Replace dev_*() by pci_*() macros
serial: 8250_pci: Get rid of redundant 'else' keyword
serial: 8250_pci: Refactor the loop in pci_ite887x_init()
tty: add rpmsg driver
...
|
|
Declaring the struct packed here is mostly harmless,
but gives a bad example for people to copy.
As the struct is packed and aligned manually,
let's just drop the attribute.
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
This patch adds IRQ support for the virtio GPIO driver. Note that this
uses the irq_bus_lock/unlock() callbacks, since those operations over
virtio may sleep.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
|