| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
prctl"
Charlie Jenkins <[email protected]> says:
Improve the performance of icache flushing by creating a new prctl flag
PR_RISCV_SET_ICACHE_FLUSH_CTX. The interface is left generic to allow
for future expansions such as with the proposed J extension [1].
Documentation is also provided to explain the use case.
Patch sent to add PR_RISCV_SET_ICACHE_FLUSH_CTX to man-pages [2].
[1] https://github.com/riscv/riscv-j-extension
[2] https://lore.kernel.org/linux-man/[email protected]
* b4-shazam-merge:
cpumask: Add assign cpu
documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl
riscv: Include riscv_set_icache_flush_ctx prctl
riscv: Remove unnecessary irqflags processor.h include
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Add fortify tests for memcpy() and memmove(). This can use a similar
method to the fortify_panic() replacement, only we can do it for what
was the WARN_ONCE(), which can be redefined.
Since this is primarily testing the fortify behaviors of the memcpy()
and memmove() defenses, the tests for memcpy() and memmove() are
identical.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Now that a pwm_chip has a dedicated struct device, pwmchip_set_drvdata()
and pwmchip_get_drvdata() can be made thin wrappers around
dev_set_drvdata() and dev_get_drvdata() respectively and the previously
needed pointer can be dropped from struct pwm_chip.
Link: https://lore.kernel.org/r/a5e05bd2d83421a26fdef6a87d69253c0f98becf.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Adding support to attach bpf program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two kprobe multi links.
Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the bpf program on return
probe simply by returning zero or non zero from the entry bpf
program execution to execute or not the bpf program on return
probe respectively.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add an IPI command definition for communication with IMGSYS through
SCP mailbox.
Signed-off-by: Olivia Wen <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Adding UAPI support for CXL r3.1 8.2.9.5.4
Clear Log command.
This proposed patch will be useful for clearing and populating
the Vendor debug log in certain scenarios, allowing for the
aggregation of results over time.
Signed-off-by: Srinivasulu Thanneeru <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
Adding UAPI support for
1. CXL r3.1 8.2.9.5.3 Get Log Capabilities.
2. CXL r3.1 8.2.9.5.6 Get Supported Logs Sub-List.
Signed-off-by: Srinivasulu Thanneeru <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
Merge series from Luca Ceresoli <[email protected]>:
This series applies various improvements to the DAPM documentation: a
rewrite of a few sections for clarity, style improvements and typo fixes.
Signed-off-by: Luca Ceresoli <[email protected]>
---
Changes in v2:
- avoid wrapping in patch 3 as suggested by Alex
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Luca Ceresoli (12):
ASoC: doc: dapm: fix typos
ASoC: doc: dapm: fix struct name
ASoC: doc: dapm: minor rewording
ASoC: doc: dapm: remove dash after colon
ASoC: doc: dapm: clarify it's an internal API
ASoC: doc: dapm: replace "map" with "graph"
ASoC: doc: dapm: extend initial descrption
ASoC: doc: dapm: describe how widgets and routes are registered
ASoC: doc: dapm: fix and improve section "Registering DAPM controls"
ASoC: doc: dapm: improve section "Codec/DSP Widget Interconnections"
ASoC: doc: dapm: update section "DAPM Widget Events"
ASoC: doc: dapm: update event types
Documentation/sound/soc/dapm-graph.svg | 375 +++++++++++++++++++++++++++++++++
Documentation/sound/soc/dapm.rst | 174 ++++++++++-----
2 files changed, 492 insertions(+), 57 deletions(-)
---
base-commit: c942a0cd3603e34dd2d7237e064d9318cb7f9654
change-id: 20240315-dapm-docs-79bd51f267db
Best regards,
--
Luca Ceresoli <[email protected]>
|
|
Merge series from Cezary Rojewski <[email protected]>:
A set of changes that aims to improve readability of cohesiveness of the
pcm code for the avs-driver.
Start off with a change that synchronizes DAI open/close - DAIs are
started up in ascending order yet their shutdown does not follow the
scheme - it is done in the ascending order too, rather than desceding
one. This patch is a dependency for the next one in line.
To align the HDAudio DAI startup/shutdown with the non-HDAudio
equivalents, relocate the code from component to DAI. The reason above
is a dependency stems from codec driver requirements - HDAudio code
found in sound/pci/hda/ expects substream->runtime->private_data to
point to a valid stream (HOST) pointer.
With the hard part done, the follow up changes update the existing code
to reduce it is complexity - removal of duplicates, renaming of
ambiguous functions and adding new fields to DAI-data object so that the
number of local variables and casts is reduced.
|
|
sfp_select_interface() does not modify its link_modes argument, so
make this a const pointer.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Daniel Machon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In some scenarios using Emulated-ISM device, sndbuf can share the same
physical memory region with peer DMB to avoid data copy from one side
to the other. In such case the sndbuf is only a descriptor that
describes the shared memory and does not actually occupy memory, it's
more like a ghost buffer.
+----------+ +----------+
| socket A | | socket B |
+----------+ +----------+
| |
+--------+ +--------+
| sndbuf | | DMB |
| desc | | desc |
+--------+ +--------+
| |
| +----v-----+
+--------------------------> memory |
+----------+
So here introduces three new SMC-D device operations to check if this
feature is supported by device, and to {attach|detach} ghost sndbuf to
peer DMB. For now only loopback-ism supports this.
Signed-off-by: Wen Gu <[email protected]>
Reviewed-by: Wenjia Zhang <[email protected]>
Reviewed-and-tested-by: Jan Karcher <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Some operations are not supported by new introduced Emulated-ISM, so
mark them as optional and check if the device supports them when called.
Signed-off-by: Wen Gu <[email protected]>
Reviewed-by: Wenjia Zhang <[email protected]>
Reviewed-and-tested-by: Jan Karcher <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The struct 'ism_client' is specialized for s390 platform firmware ISM.
So replace it with 'void' to make SMCD DMB registration helper generic
for both Emulated-ISM and existing ISM.
Signed-off-by: Wen Gu <[email protected]>
Reviewed-by: Wenjia Zhang <[email protected]>
Reviewed-and-tested-by: Jan Karcher <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The transfer timeout is 2100 ms, not 2.1 ms. Fix this in the
kerneldoc comment.
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
These stats are commonly. Support reporting those via netdev-genl queue
stats.
name: rx-hw-drops
name: rx-hw-drop-overruns
name: rx-csum-unnecessary
name: rx-csum-none
name: rx-csum-bad
name: rx-hw-gro-packets
name: rx-hw-gro-bytes
name: rx-hw-gro-wire-packets
name: rx-hw-gro-wire-bytes
name: rx-hw-drop-ratelimits
name: tx-hw-drops
name: tx-hw-drop-errors
name: tx-csum-none
name: tx-needs-csum
name: tx-hw-gso-packets
name: tx-hw-gso-bytes
name: tx-hw-gso-wire-packets
name: tx-hw-gso-wire-bytes
name: tx-hw-drop-ratelimits
Signed-off-by: Xuan Zhuo <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The virtio-net device stats spec:
https://github.com/oasis-tcs/virtio-spec/commit/42f389989823039724f95bbbd243291ab0064f82
We introduce the relative feature and structures.
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Utilize the -dd flag (driver-specific details) in the rdmatool
to view driver-specific QPs which are not exposed yet.
Add the netlink attribute to mark request to convey driver details and
use it to return QP subtype as a string.
$ rdma resource show qp link ibp8s0f1
link ibp8s0f1/1 lqpn 360 type UD state RTS sq-psn 0 comm [mlx5_ib]
link ibp8s0f1/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp8s0f1/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
$ rdma resource show qp link ibp8s0f1 -dd
link ibp8s0f1/1 lqpn 360 type UD state RTS sq-psn 0 comm [mlx5_ib]
link ibp8s0f1/1 lqpn 465 type DRIVER subtype REG_UMR state RTS sq-psn 0 comm [mlx5_ib]
link ibp8s0f1/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp8s0f1/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
$ rdma resource show
0: ibp8s0f0: pd 3 cq 4 qp 3 cm_id 0 mr 0 ctx 0 srq 2
1: ibp8s0f1: pd 3 cq 4 qp 3 cm_id 0 mr 0 ctx 0 srq 2
$ rdma resource show -dd
0: ibp8s0f0: pd 3 cq 4 qp 4 cm_id 0 mr 0 ctx 0 srq 2
1: ibp8s0f1: pd 3 cq 4 qp 4 cm_id 0 mr 0 ctx 0 srq 2
Signed-off-by: Chiara Meiohas <[email protected]>
Link: https://lore.kernel.org/r/2607bb3ddec3cae3443c2ea19e9f700825d20a98.1713268997.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.10-rc1
FPGA MGR core:
- Marco's change adds module owner parameter for all registration APIs.
FPGA test:
- Macro's change uses KUnit devices instead of platform devices.
DFL:
- Peter's change cleans up unused symbols.
Xlinux:
- Charles adds SelectMAP interface reprogramming support.
- Andy's header inclusion cleanup.
Altera:
- Krzysztof & Christophe's cleanup for drivers
* tag 'fpga-for-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: region: add owner module and take its refcount
fpga: dfl: remove unused member pdata from struct dfl_{afu,fme}
fpga: dfl: remove unused function is_dfl_feature_present()
fpga: ice40-spi: Don't use "proxy" headers
fpga: tests: use KUnit devices instead of platform devices
fpga: altera-cvp: Remove an unused field in struct altera_cvp_conf
fpga: altera: drop driver owner assignment
fpga: xilinx-core: add new gpio names for prog and init
fpga: xilinx-selectmap: add new driver
dt-bindings: fpga: xlnx,fpga-selectmap: add DT schema
fpga: xilinx-spi: extract a common driver core
fpga: bridge: add owner module and take its refcount
fpga: manager: add owner module and take its refcount
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Second set of Counter updates for 6.10
Counter header file is updated to include only headers that are actually
use.
* tag 'counter-updates-for-6.10b' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: Don't use "proxy" headers
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
UAPI Changes:
- drm/i915/guc: Use context hints for GT frequency
Allow user to provide a low latency context hint. When set, KMD
sends a hint to GuC which results in special handling for this
context. SLPC will ramp the GT frequency aggressively every time
it switches to this context. The down freq threshold will also be
lower so GuC will ramp down the GT freq for this context more slowly.
We also disable waitboost for this context as that will interfere with
the strategy.
We need to enable the use of SLPC Compute strategy during init, but
it will apply only to contexts that set this bit during context
creation.
Userland can check whether this feature is supported using a new param-
I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
enabled platforms as they use SLPC for frequency management.
The Mesa usage model for this flag is here -
https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint
- drm/i915/gt: Enable only one CCS for compute workload
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance
***
NOTE: This W/A will make all DG2 SKUs appear like single CCS SKUs by
default to mitigate a hardware bug. All the EUs will still remain
usable, and all the userspace drivers have been confirmed to be able
to dynamically detect the change in number of CCS engines and adjust.
For the smaller percent of applications that get perf benefit from
letting the userspace driver dispatch across all 4 CCS engines we will
be introducing a sysfs control as a later patch to choose 4 CCS each
with 25% EUs (or 50% if 2 CCS).
NOTE: A regression has been reported at
https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895
However Andi has been triaging the issue and we're closing in a fix
to the gap in the W/A implementation:
https://lists.freedesktop.org/archives/intel-gfx/2024-April/348747.html
Driver Changes:
- Add new and fix to existing workarounds: Wa_14018575942 (MTL),
Wa_16019325821 (Gen12.70), Wa_14019159160 (MTL), Wa_16015675438,
Wa_14020495402 (Gen12.70) (Tejas, John, Lucas)
- Fix UAF on destroy against retire race and remove two earlier
partial fixes (Janusz)
- Limit the reserved VM space to only the platforms that need it (Andi)
- Reset queue_priority_hint on parking for execlist platforms (Chris)
- Fix gt reset with GuC submission is disabled (Nirmoy)
- Correct capture of EIR register on hang (John)
- Remove usage of the deprecated ida_simple_xx() API
- Refactor confusing __intel_gt_reset() (Nirmoy)
- Fix the fix for GuC reset lock confusion (John)
- Simplify/extend platform check for Wa_14018913170 (John)
- Replace dev_priv with i915 (Andi)
- Add and use gt_to_guc() wrapper (Andi)
- Remove bogus null check (Rodrigo, Dan)
. Selftest improvements (Janusz, Nirmoy, Daniele)
Signed-off-by: Dave Airlie <[email protected]>
From: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Inclusion of the header linux/btf_ids.h relies on indirect inclusion of
the header linux/types.h. Including it directly on the top level helps
to avoid potential problems if linux/types.h hasn't been included
before.
The main motivation to introduce this it is to avoid similar problems that
have shown up in the bpftool where GNU libc indirectly pulls
linux/types.h causing compile error of the form:
error: unknown type name 'u32'
u32 cnt;
^~~
The bpftool compile error was fixed in
62248b22d01e ("tools/resolve_btfids: fix build with musl libc").
Signed-off-by: Dmitrii Bundin <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.10
1. Support for handling notification pending interrupt(NPI)
The FF-A uses the notification pending interrupt to inform the receiver
that it has a pending notification. This is a virtual interrupt and is
used by the following type of receivers:
- A guest/VM running under a hypervisor(normal world usecase)
- An S-EL1 SP running under a S-EL2 SPMC(secure world only usecase)
Also, when the FF-A driver is running inside a guest VM under an
hypervisor, the driver/guest VM doesn't have the permission/capability
to request the creation of notification bitmaps. For a VM, the hypervisor
reserves memory for its VM and hypervisor framework notification bitmaps
and the SPMC reserves memory for its SP and SPMC framework notification
bitmaps before the hypervisor initializes it.
These changes include skipping of creation of notification bitmaps, some
refactoring around schedule receiver interrupt(SRI) handling and addition
of support for NPI.
2. Support for FF-A indirect messaging
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint and inform the scheduler that the
receiver endpoint must be run.
Apart from these two main features, there is an optimisation to avoid
queuing of a work when already running on the worker queue.
* tag 'ffa-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Avoid queuing work when running on the worker queue
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
firmware: arm_ffa: Add support for FFA_MSG_SEND2
firmware: arm_ffa: Stash the partition properties for query purposes
firmware: arm_ffa: Fix kernel warning about incorrect SRI/NPI
firmware: arm_ffa: Add support for handling notification pending interrupt(NPI)
firmware: arm_ffa: Refactor SRI handling in prepartion to add NPI support
firmware: arm_ffa: Skip creation of the notification bitmaps
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.10
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
* tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
pinctrl: Implementation of the generic scmi-pinctrl driver
firmware: arm_scmi: Add basic support for SCMI v3.2 pincontrol protocol
dt-bindings: firmware: Support SCMI pinctrl protocol
firmware: arm_scmi: Introduce get_max_msg_size() helper/accessor
firmware: arm_scmi: Add support for multiple vendors custom protocols
dt-bindings: firmware: arm,scmi: Update examples for protocol@13
firmware: arm_scmi: Avoid non-constant printk format strings
firmware: arm_scmi: Use dev_err_probe to bail out
firmware: arm_scmi: Simplify scmi_devm_notifier_unregister
firmware: arm_scmi: Add message dump traces for bad and unexpected replies
firmware: arm_scmi: Add helper to trace bad messages
include: trace: Widen the tag buffer in trace_scmi_dump_msg
firmware: arm_scmi: Log the perf domain names in the error paths
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
TEE driver for Trusted Services
This introduces a TEE driver for Trusted Services [1].
Trusted Services is a TrustedFirmware.org project that provides a
framework for developing and deploying device Root of Trust services in
FF-A [2] Secure Partitions. The project hosts the reference
implementation of Arm Platform Security Architecture [3] for Arm
A-profile devices.
The FF-A Secure Partitions are accessible through the FF-A driver in
Linux. However, the FF-A driver doesn't have a user space interface so
user space clients currently cannot access Trusted Services. The goal of
this TEE driver is to bridge this gap and make Trusted Services
functionality accessible from user space.
[1] https://www.trustedfirmware.org/projects/trusted-services/
[2] https://developer.arm.com/documentation/den0077/
[3] https://www.arm.com/architecture/security-features/platform-security
* tag 'tee-ts-for-v6.10' of https://git.linaro.org/people/jens.wiklander/linux-tee:
MAINTAINERS: tee: tstee: Add entry
Documentation: tee: Add TS-TEE driver
tee: tstee: Add Trusted Services TEE driver
tee: optee: Move pool_op helper functions
tee: Refactor TEE subsystem header files
Link: https://lore.kernel.org/r/20240425073119.GA3261080@rayden
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.10
This adds a much needed cleanup for the MediaTek CMDQ helper driver and
also some more helper functions which will be used in drivers using the
MediaTek Global Command Engine (GCE) HW.
Also adds support for MT8188's VPPSYS mutex for MDP3 support, a new SoC
in the mtk-socinfo driver and changes the marketing name for the pre
existing MT8188 SoC.
* tag 'mtk-soc-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
soc: mediatek: socinfo: Advertise about unknown MediaTek SoC
soc: mediatek: cmdq: Don't log an error when gce-client-reg is not found
soc: mediatek: mtk-cmdq: Add cmdq_pkt_acquire_event() function
soc: mediatek: mtk-cmdq: Add cmdq_pkt_poll_addr() function
soc: mediatek: mtk-cmdq: Add cmdq_pkt_mem_move() function
soc: mediatek: mtk-cmdq: Add specific purpose register definitions for GCE
soc: mediatek: cmdq: Refine cmdq_pkt_create() and cmdq_pkt_destroy()
soc: mediatek: cmdq: Remove cmdq_pkt_flush_async() helper function
soc: mediatek: cmdq: Add cmdq_pkt_eoc() helper function
soc: mediatek: cmdq: Add cmdq_pkt_jump_rel() helper function
soc: mediatek: cmdq: Rename cmdq_pkt_jump() to cmdq_pkt_jump_abs()
soc: mediatek: cmdq: Add parameter shift_pa to cmdq_pkt_jump()
soc: mediatek: cmdq: Fix typo of CMDQ_JUMP_RELATIVE
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/drivers
Driver updates for ti-sysc
A change to update the handling of no-reset-on-init quirk to make it init
time only like it should be. And a change to add the missing copyrights.
Also a series of changes to simplify the driver by dropping the old unused
handling for interconnect targets tagged pm_runtime_irq_safe().
These are all non-urgent changes and can be queued whenever suitable.
* tag 'drivers-ti-sysc-for-v6.10-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.10
The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits. Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.
The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.
initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.
Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.
The bwmon regmap cache is changed to maple tree.
After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.
Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.
More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.
Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.
The socinfo drivers learns about X1 Elite and SMB2360 PMIC.
The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.
* tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (21 commits)
soc: qcom: cmd-db: replace deprecated strncpy with strtomem
soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request
firmware: qcom: scm: Modify only the download bits in TCSR register
firmware: qcom: scm: Fix __scm and waitq completion variable initialization
firmware: qcom: scm: Rework dload mode availability check
firmware: qcom: scm: Remove redundant scm argument from qcom_scm_waitq_wakeup()
firmware: qcom: scm: Remove log reporting memory allocation failure
soc: qcom: pmic_glink: notify clients about the current state
soc: qcom: pmic_glink: don't traverse clients list without a lock
soc: qcom: mention intentionally broken module autoloading
firmware: qcom: qcm: fix unused qcom_scm_qseecom_allowlist
MAINTAINERS: Split Qualcomm SoC and linux-arm-msm entries
soc: qcom: qcom_stats: Add DSPs and apss subsystem stats
dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible
soc: qcom: socinfo: Add SMB2360 PMIC
soc: qcom: socinfo: Add X1E80100 SoC ID table entry
dt-bindings: arm: qcom,ids: Add SoC ID for X1E80100
soc: qcom: Update init level to core_initcall() for cmd-db and rpmh-rsc
soc: qcom: icc-bwmon: Convert to use maple tree register cache
firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers
STM32 Firewall bus for v6.10, round 1
Highlights:
---------
Introduce STM32 Firewall framework for STM32MP1x and STM32MP2x
platforms. STM32MP1x(ETZPC) and STM32MP2x(RIFSC) Firewall controllers
register to the framework to offer firewall services such as access
granting.
This series of patches is a new approach on the previous STM32 system
bus, history is available here:
https://lore.kernel.org/lkml/20230127164040.1047583/
The need for such framework arises from the fact that there are now
multiple hardware firewalls implemented across multiple products.
Drivers are shared between different products, using the same code.
When it comes to firewalls, the purpose mostly stays the same: Protect
hardware resources. But the implementation differs, and there are
multiple types of firewalls: peripheral, memory, ...
Some hardware firewall controllers such as the RIFSC implemented on
STM32MP2x platforms may require to take ownership of a resource before
being able to use it, hence the requirement for firewall services to
take/release the ownership of such resources.
On the other hand, hardware firewall configurations are becoming
more and more complex. These mecanisms prevent platform crashes
or other firewall-related incoveniences by denying access to some
resources.
The stm32 firewall framework offers an API that is defined in
firewall controllers drivers to best fit the specificity of each
firewall.
For every peripherals protected by either the ETZPC or the RIFSC, the
firewall framework checks the firewall controlelr registers to see if
the peripheral's access is granted to the Linux kernel. If not, the
peripheral is configured as secure, the node is marked populated,
so that the driver is not probed for that device.
The firewall framework relies on the access-controller device tree
binding. It is used by peripherals to reference a domain access
controller. In this case a firewall controller. The bus uses the ID
referenced by the access-controller property to know where to look
in the firewall to get the security configuration for the peripheral.
This allows a device tree description rather than a hardcoded peripheral
table in the bus driver.
The STM32 ETZPC device is responsible for filtering accesses based on
security level, or co-processor isolation for any resource connected
to it.
The RIFSC is responsible for filtering accesses based on Compartment
ID / security level / privilege level for any resource connected to
it.
* tag 'stm32-bus-firewall-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
firewall: introduce stm32_firewall framework
dt-bindings: bus: document ETZPC
dt-bindings: bus: document RIFSC
dt-bindings: treewide: add access-controllers description
dt-bindings: document generic access controllers
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This is in preparation for supporting interface tuning in one for the
devices using the axi-adc backend. The new added interfaces are all
needed for that calibration:
* iio_backend_test_pattern_set();
* iio_backend_chan_status();
* iio_backend_iodelay_set();
* iio_backend_data_sample_trigger().
Interface tuning is the process of going through a set of known points
(typically by the frontend), change some clk or data delays (or both)
and send/receive some known signal (so called test patterns in this
change). The receiving end (either frontend or the backend) is
responsible for validating the signal and see if it's good or not. The
goal for all of this is to come up with ideal delays at the data
interface level so we can have a proper, more reliable data transfer.
Also note that for some devices we can change the sampling rate
(which typically means changing some reference clock) and that can
affect the data interface. In that case, it's import to run the tuning
algorithm again as the values we had before may no longer be the best (or
even valid) ones.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Using tabs and maintaining the start of the docs aligned is a pain and
may lead to lot's of unrelated changes when adding new members. Hence,
let#s change things now and just have a simple space after the member
name.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The ACPI "ROTM" rotation matrix parsing code atm is already duplicated
between bmc150-accel-core.c and kxcjk-1013.c and a third user of this
is coming.
Add an iio_read_acpi_mount_matrix() helper function for this.
The 2 existing copies of the code are identical, except that
the kxcjk-1013.c has slightly better error logging.
To new helper is a 1:1 copy of the kxcjk-1013.c version, the only change
is the addition of a "char *acpi_method" parameter since some bmc150
dual-accel setups (360° hinges with 1 accel in kbd/base + 1 in display)
declare both accels in a single ACPI device with 2 different method names
for the 2 matrices. This new acpi_method parameter is not "const char *"
because the pathname parameter to acpi_evaluate_object() is not const.
The 2 existing copies of this function will be removed in further patches
in this series.
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6 into v6.10/vfio/qat-v7
|
|
Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas
has some fun with i915-gem conflicts.
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Add dt schema documentation and clock IDs for the High Speed Interface
2 (HSI2) clock management unit. This CMU feeds high speed interfaces
such as PCIe and UFS.
[AD: * keep CMUs in google,gs101.h sorted alphabetically
* resolve minor merge conflicts in google,gs101-clock.yaml
* s/ufs_embd/ufs s/mmc_card/mmc
Signed-off-by: Peter Griffin <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: André Draszik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
The core code does not modify the 'struct snd_sof_dsp_ops', stored in
'struct sof_dev_desc'. Make the pointer to 'struct snd_sof_dsp_ops'
const to annotate this, make code a bit safer and allow individual
drivers to also define this structure as const.
Tested-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Some new SOF changes depend on the fixes there.
|
|
During startup snd_soc_dai_startup() is launched in ascending order and
the exact same thing is done during shutdown procedure. Reverse the
order in the latter so that it is symmetric to the former.
Signed-off-by: Cezary Rojewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Make the netfs_io_request::subreq_counter, used to generate values for
netfs_io_subrequest::debug_index, into an atomic_t so that it can be called
from the retry thread at the same time as the app thread issuing writes.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
|
|
Remove the PG_fscache alias for PG_private_2 and use the latter directly.
Use of this flag for marking pages undergoing writing to the cache should
be considered deprecated and the folios should be marked dirty instead and
the write done in ->writepages().
Note that PG_private_2 itself should be considered deprecated and up for
future removal by the MM folks too.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: Matthew Wilcox (Oracle) <[email protected]>
cc: Ilya Dryomov <[email protected]>
cc: Xiubo Li <[email protected]>
cc: Steve French <[email protected]>
cc: Paulo Alcantara <[email protected]>
cc: Ronnie Sahlberg <[email protected]>
cc: Shyam Prasad N <[email protected]>
cc: Tom Talpey <[email protected]>
cc: Bharath SM <[email protected]>
cc: Trond Myklebust <[email protected]>
cc: Anna Schumaker <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
When dirty data is being written to the cache, setting/waiting on/clearing
the fscache flag is always done in tandem with setting/waiting on/clearing
the writeback flag. The netfslib buffered write routines wait on and set
both flags and the write request cleanup clears both flags, so the fscache
flag is almost superfluous.
The reason it isn't superfluous is because the fscache flag is also used to
indicate that data just read from the server is being written to the cache.
The flag is used to prevent a race involving overlapping direct-I/O writes
to the cache.
Change this to indicate that a page is in need of being copied to the cache
by placing a magic value in folio->private and marking the folios dirty.
Then when the writeback code sees a folio marked in this way, it only
writes it to the cache and not to the server.
If a folio that has this magic value set is modified, the value is just
replaced and the folio will then be uplodaded too.
With this, PG_fscache is no longer required by the netfslib core, 9p and
afs.
Ceph and nfs, however, still need to use the old PG_fscache-based tracking.
To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the
flags in the netfs_inode struct for those filesystems. This reenables the
use of PG_fscache in that inode. 9p and afs use the netfslib write helpers
so get switched over; cifs, for the moment, does page-by-page manual access
to the cache, so doesn't use PG_fscache and is unaffected.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: Matthew Wilcox (Oracle) <[email protected]>
cc: Eric Van Hensbergen <[email protected]>
cc: Latchesar Ionkov <[email protected]>
cc: Dominique Martinet <[email protected]>
cc: Christian Schoenebeck <[email protected]>
cc: Marc Dionne <[email protected]>
cc: Ilya Dryomov <[email protected]>
cc: Xiubo Li <[email protected]>
cc: Steve French <[email protected]>
cc: Paulo Alcantara <[email protected]>
cc: Ronnie Sahlberg <[email protected]>
cc: Shyam Prasad N <[email protected]>
cc: Tom Talpey <[email protected]>
cc: Bharath SM <[email protected]>
cc: Trond Myklebust <[email protected]>
cc: Anna Schumaker <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
The generic metadata pixel formats (V4L2_META_FMT_GENERIC_*) are meant
to be used in conjunction with device-specific media bus codes. Those
codes are work in progress and not available in the upstream kernel yet.
To make sure the generic metadata pixel formats won't be used by
userspace until we have the full infrastructure in place, keep their
definition private to the kernel for now.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Add a header for the PCI device table of all IPU6 devices. This will be
used by the IPU bridge as well so place the table in a header.
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
This is a packed grey-scale image format with a depth of 14 bits per
pixel. Every four consecutive samples are packed into seven bytes. Each
of the first four bytes contain the eight high order bits of the pixels,
and the three following bytes contains the six least significants bits
of each pixel, in the same order.
As the other formats only needed 5 bytes before, append two bytes in the
documentation array.
Signed-off-by: Jean-Michel Hautbois <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
This is a packed grey-scale image format with a depth of 12 bits per
pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes
contain the 8 high order bits of the pixels, and the 3rd byte contains
the 4 least significants bits of each pixel, in the same order.
Add the entry in userspace API, and document it.
Signed-off-by: Jean-Michel Hautbois <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Add two new functions, v4l2_subdev_lock_states() and
v4l2_subdev_unclock_states(), to acquire and release the state of two
sub-devices. They differ from calling v4l2_subdev_{un,}lock_state() so
that if the two states share the same lock, the lock is acquired only
once.
Also use the new functions in v4l2_subdev_link_validate().
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Julien Massot <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Set (and unset) the V4L2_FMT_FLAG_META_LINE_BASED flag in struct
v4l2_fmtdesc based on the format after returning the driver callback for
enumerating formats. This way the drivers don't need to care about the
flag.
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Many camera sensors, among other devices, transmit embedded data and image
data for each CSI-2 frame. This embedded data typically contains register
configuration of the sensor that has been used to capture the image data
of the same frame.
The embedded data is received by the CSI-2 receiver and has the same
properties as the image data, including that it is line based: it has
width, height and bytesperline (stride).
Add these fields to struct v4l2_meta_format and document them.
Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is
line-based i.e. these fields of struct v4l2_meta_format are valid for it.
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Generic 8-bit metadata formats define the in-memory data layout but not
the format of the data itself. The reasoning for having such formats is to
allow CSI-2 receiver drivers to receive and DMA drivers to write the data
to memory without knowing a large number of device-specific formats.
These formats may be used only in conjunction with a Media Controller
pipeline where the internal pad of the source sub-device defines the
specific format of the data (using an mbus code).
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|