Age | Commit message (Collapse) | Author | Files | Lines |
|
We want the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
0day robot reported a 9.2% regression for will-it-scale mmap1 test
case[1], caused by commit 57efa1fe5957 ("mm/gup: prevent gup_fast from
racing with COW during fork").
Further debug shows the regression is due to that commit changes the
offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some
cache alignment changes.
From the perf data, the contention for 'mmap_lock' is very severe and
takes around 95% cpu cycles, and it is a rw_semaphore
struct rw_semaphore {
atomic_long_t count; /* 8 bytes */
atomic_long_t owner; /* 8 bytes */
struct optimistic_spin_queue osq; /* spinner MCS lock */
...
Before commit 57efa1fe5957 adds the 'write_protect_seq', it happens to
have a very optimal cache alignment layout, as Linus explained:
"and before the addition of the 'write_protect_seq' field, the
mmap_sem was at offset 120 in 'struct mm_struct'.
Which meant that count and owner were in two different cachelines,
and then when you have contention and spend time in
rwsem_down_write_slowpath(), this is probably *exactly* the kind
of layout you want.
Because first the rwsem_write_trylock() will do a cmpxchg on the
first cacheline (for the optimistic fast-path), and then in the
case of contention, rwsem_down_write_slowpath() will just access
the second cacheline.
Which is probably just optimal for a load that spends a lot of
time contended - new waiters touch that first cacheline, and then
they queue themselves up on the second cacheline."
After the commit, the rw_semaphore is at offset 128, which means the
'count' and 'owner' fields are now in the same cacheline, and causes
more cache bouncing.
Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will
affect its offset:
CONFIG_MMU
CONFIG_MEMBARRIER
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES
The layout above is on 64 bits system with 0day's default kernel config
(similar to RHEL-8.3's config), in which all these 3 options are 'y'.
And the layout can vary with different kernel configs.
Relayouting a structure is usually a double-edged sword, as sometimes it
can helps one case, but hurt other cases. For this case, one solution
is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t
(when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes
hole in 'mm_struct' will not change other fields' alignment, while
restoring the regression.
Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Feng Tang <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: Peter Xu <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of tiny USB fixes for 5.13-rc6.
There are more than I would normally like, but there's been a bunch of
people banging on the gadget and dwc3 and typec code recently for I
think an Android release, which has resulted in a number of small
fixes. It's nice to see companies send fixes upstream for this type of
work, a notable change from years ago.
Anyway, fixes in here are:
- usb-serial device id updates
- usb-serial cp210x driver fixes for broken firmware versions
- typec fixes for crazy charging devices and other reported problems
- dwc3 fixes for reported problems found
- gadget fixes for reported problems
- tiny xhci fixes
- other small fixes for reported issues.
- revert of a problem fix found by linux-next testing
All of these have passed 0-day and linux-next testing with no reported
problems (the revert for the found linux-next build problem included)"
* tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits)
Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"
usb: typec: mux: Fix copy-paste mistake in typec_mux_match
usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
usb: gadget: fsl: Re-enable driver for ARM SoCs
usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
USB: serial: cp210x: fix CP2102N-A01 modem control
USB: serial: cp210x: fix alternate function for CP2102N QFN20
usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
usb: dwc3: ep0: fix NULL pointer exception
usb: gadget: eem: fix wrong eem header operation
usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()
usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
usb: fix various gadget panics on 10gbps cabling
usb: fix various gadgets null ptr deref on 10gbps cabling.
usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
usb: f_ncm: only first packet of aggregate needs to start timer
USB: f_ncm: ncm_bitrate (speed) is unsigned
MAINTAINERS: usb: add entry for isp1760
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small misc driver fixes for 5.13-rc6 that fix some
reported problems:
- Tiny phy driver fixes for reported issues
- rtsx regression for when the device suspended
- mhi driver fix for a use-after-free
All of these have been in linux-next for a few days with no reported
issues"
* tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
bus: mhi: pci-generic: Fix hibernation
bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
bus: mhi: pci_generic: T99W175: update channel name from AT to DUN
phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
phy: ti: Fix an error code in wiz_probe()
phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
phy: usb: Fix misuse of IS_ENABLED
|
|
Pull io_uring fixes from Jens Axboe:
"Just an API change for the registration changes that went into this
release. Better to get it sorted out now than before it's too late"
* tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
io_uring: add feature flag for rsrc tags
io_uring: change registration/upd/rsrc tagging ABI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes:
- Fix performance regression caused by lack of intended batching of
RCU callbacks by over-eager NOHZ-full code.
- Fix cgroups related corruption of load_avg and load_sum metrics.
- Three fixes to fix blocked load, util_sum/runnable_sum and util_est
tracking bugs"
* tag 'sched-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling
sched/pelt: Ensure that *_sum is always synced with *_avg
tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed
sched/fair: Make sure to update tg contrib for blocked load
sched/fair: Keep load_avg and load_sum synced
|
|
Add IORING_FEAT_RSRC_TAGS indicating that io_uring supports a bunch of
new IORING_REGISTER operations, in particular
IORING_REGISTER_[FILES[,UPDATE]2,BUFFERS[2,UPDATE]] that support rsrc
tagging, and also indicating implemented dynamic fixed buffer updates.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/9b995d4045b6c6b4ab7510ca124fd25ac2203af7.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.
It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.
Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/9b554897a7c17ad6e3becc48dfed2f7af9f423d5.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull rdma fixes from Jason Gunthorpe:
"A mixture of small bug fixes and a small security issue:
- WARN_ON when IPoIB is automatically moved between namespaces
- Long standing bug where mlx5 would use the wrong page for the
doorbell recovery memory if fork is used
- Security fix for mlx4 that disables the timestamp feature
- Several crashers for mlx5
- Plug a recent mlx5 memory leak for the sig_mr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix initializing CQ fragments buffer
RDMA/mlx5: Delete right entry from MR signature database
RDMA: Verify port when creating flow rule
RDMA/mlx5: Block FDB rules when not in switchdev mode
RDMA/mlx4: Do not map the core_clock page to user space unless enabled
RDMA/mlx5: Use different doorbell memory for different processes
RDMA/ipoib: Fix warning caused by destroying non-initial netns
|
|
git://github.com/ojeda/linux
Pull compiler attribute update from Miguel Ojeda:
"A trivial update to the compiler attributes: Add 'continue' keyword to
documentation in comment (from Wei Ming Chen)"
* tag 'compiler-attributes-for-linus-v5.13-rc6' of git://github.com/ojeda/linux:
Compiler Attributes: Add continue in comment
|
|
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, including a TLB flush fix that affects processors without
nested page tables"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: fix previous commit for 32-bit builds
kvm: avoid speculation-based attacks from out-of-range memslot accesses
KVM: x86: Unload MMU on guest TLB flush if TDP disabled to force MMU sync
KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message
selftests: kvm: Add support for customized slot0 memory size
KVM: selftests: introduce P47V64 for s390x
KVM: x86: Ensure PV TLB flush tracepoint reflects KVM behavior
KVM: X86: MMU: Use the correct inherited permissions to get shadow page
KVM: LAPIC: Write 0 to TMICT should also cancel vmx-preemption timer
KVM: SVM: Fix SEV SEND_START session length & SEND_UPDATE_DATA query length after commit 238eca821cee
|
|
aspm (Active State Power Management)
rtsx_comm_set_aspm: this function is for driver to make sure
not enter power saving when processing of init and card_detcct
ASPM_MODE_CFG: 8411 5209 5227 5229 5249 5250
Change back to use original way to control aspm
ASPM_MODE_REG: 5227A 524A 5250A 5260 5261 5228
Keep the new way to control aspm
Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function")
Reported-by: Chris Chiu <[email protected]>
Tested-by: Gordon Lack <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Ricky Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of new IIO/counter device support, features and cleanup for 5.14
There are a couple of large cleanup sets in here alongside a number of new
drivers.
Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.
Counters
========
New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
- New driver.
IIO
===
New device support
* amstaos,tsl2591 ambient light sensor.
- New driver + bindings
- Follow up fix to ensure some local variables are suitable for error
handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
- New driver + bindings
- Includes an errata work around that cause a build bot failure fixed
by adding a stub to i2c.
* kionix,kxcjk-1013
- Add support for KX023-1025 device. Mostly a different register map
that needed to be supported.
* murata,sca3300 accelerometer
- New driver + bindings
* st,lsm9ds0 IMU
- Rework of st,sensors driver to cleanly support this new glue driver
that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
- New driver. Intent here is to use this with existing IIO consumer
drivers such as resistive-adc-touch.
- Follow up fix to avoid an issue with unsigned subtraction in error
check.
* ti,tmp117 digital temperature sensor
- New driver + bindings
Features
* adi,ad5755
- Add missing dt-binding doc
* adi,ad7298
- Add ACPI ID used on Intel Galileo Gen 1 boards.
- Add missing dt-binding doc
* adi,ad7476
- Add missing dt-binding doc
* adi,ad7746
- Add missing dt-binding doc for this driver that will hopefully move out
of staging shortly. Update staging driver to use the binding instead of
platform data.
* adi,adis16201 + adis16209
- Add missing dt-binding doc
* adi,adis16480
- Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
- Add missing dt-binding doc
* fsl,mma7455
- Add missing dt-binding doc
* iio-rescale
- Support handling of processed channels from provider. Some ADCs
require (typically non linear) calibration functions to be applied,
and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
used as providers to the iio-rescale driver which needs to handle them
somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
- Support the serial interface. Note this required significant
refactoring of existing driver.
* st,st-sensors
- Add mount matrix support for normal dt-binding whilst continuing to
support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
- Add missing dt-binding doc
* trivial-devices - add entries for
- memsic,mx4005, memsic,mx6255 and memsic,mxc6655
- sensortek,stk8312 and sensortek,stk8ba50
Cleanup / minor fixes
* core
- Use devm_add_action_or_reset() to replace boilerplate in several
driver and core IIO devm_* functions.
- Fix an error path issue introduced by above, that could return an
error pointer rather than the expected null from dev_iio_device_alloc()
- Move more IIO internals related fields from struct iio_dev to
struct iio_dev_opaque.
- Drop unused final update of in_loc in demux setup.
* Docs
- Move some docs from driver specific to core dos to avoid replication
of names which the documentation builder does not allow.
Note this means adding a few device specific notes to the general docs
to cover the more unusual uses of the ABI.
- ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
have the bufferX/* variant. Not we are not getting rid of these
interfaces, just encouraging new code to use the new interface.
* IIO wide:
- Tidy up new cases of dev.parent etc being set in drivers as the core
now does it.
- Fix more cases of possible miss-aligned buffers when passed to
iio_push_to_buffers_with_timestamp(). Note we only have one known
instance of anyone seeing this bug actually happening, so this has been
a low priority cleanup effort for several cycles.
- sysfs_emit() used in more drivers.
- Runtime pm tidy up and use of pm_runtime_resume_and_get()
- Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
that the timestamp when inserted by naturally aligned + consumers can
assume that all fields are naturally aligned. Part of a long running
effort, with at least 2 more series to come tackling additional
variants.
- Stop specifying "mount-matrix" property name in every lookup of the
mount matrix from firmware by hard coding it in the core.
* adi,ad7476
- Handle the variety of different regulators used by the parts supported
by this driver (came up in dt-binding review)
* adi,ad7746
- Trivial drop of if (ret) return ret; return 0; pattern
- Tidy up comments
- Pull capdac setup out to own function.
* adi,ad7766
- Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
- Avoid returning error codes in interrupt handlers.
- Handle a failure in spi_write in the trigger handler.
- Rework to add updating of device page after changing it.
- Don't push data to IIO buffers when read failed.
- Add configuration of burst max speed to core avoid handling this in
each driver.
- Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
- Excessive includes cleanup via include-what-you-use static checker
after zero day highlighted that these needed updating.
* afe
- Amend binding to add #io-channel-cells, thus allowing this IIO
consumer to also be an IIO provider.
* aosong,am2315
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* bosch,bma180
- Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* ep93xx_adc,
- Drop a redundant error print.
* maxim,max118
- Convert remainder of probe() to devm_ managed functions.
- Avoid some repeated jumping back and forth between iio_dev and
spi structures.
* maxim,max11100
- Use get_unaligned_be16() instead of open coding.
- Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
- Unused error value dropped.
* sensiron,sgp30
- Drop use of %hx in favor of %x and letting the normal type conversion
work.
* sensortek,stk8312
- Add lowercase device id and note uppercase version deprecated.
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* sprx,sc72xx_adc
- add MODULE_DEVICE_TABLE
* st,lsm6dsx
- Fix docs of valid ODRs
* st,sensors
- dt-binding rework. Two efforts on this crossed in a previous cycle
so this update cherry picks the best of the two yaml conversions.
- Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
- tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
- Convert remainder of probe() functions to devm_ managed functions
to simplify error handing and remove paths.
* tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits)
i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
iio: adis: Cleanout unused headers
iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
counter: Add support for Intel Quadrature Encoder Peripheral
staging: iio: cdc: ad7746: extract capac setup to own function
staging: iio: cdc: ad7746: clean up probe return
staging: iio: cdc: ad7746: remove ordinary comments
iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
iio: adc: ti-adc0832: Use devm managed functions for all of probe()
iio: adc: ti-adc081c: Use devm managed functions for all of probe()
iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
iio: adc: max1118: Use devm_ managed functions for all of probe
iio: adc: max11100: Use devm_ functions for rest of probe()
iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
iio: chemical: sgp30: Drop use of %hx in format string.
iio: gyro: st_gyro: Support mount matrix
iio: magnetometer: st_magn: Support mount matrix
iio: accel: st_sensors: Stop copying channels
iio: accel: st_sensors: Support generic mounting matrix
...
|
|
array_index_nospec does not work for uint64_t on 32-bit builds.
However, the size of a memory slot must be less than 20 bits wide
on those system, since the memory slot must fit in the user
address space. So just store it in an unsigned long.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
KVM's mechanism for accessing guest memory translates a guest physical
address (gpa) to a host virtual address using the right-shifted gpa
(also known as gfn) and a struct kvm_memory_slot. The translation is
performed in __gfn_to_hva_memslot using the following formula:
hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE
It is expected that gfn falls within the boundaries of the guest's
physical memory. However, a guest can access invalid physical addresses
in such a way that the gfn is invalid.
__gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first
retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot
does check that the gfn falls within the boundaries of the guest's
physical memory or not, a CPU can speculate the result of the check and
continue execution speculatively using an illegal gfn. The speculation
can result in calculating an out-of-bounds hva. If the resulting host
virtual address is used to load another guest physical address, this
is effectively a Spectre gadget consisting of two consecutive reads,
the second of which is data dependent on the first.
Right now it's not clear if there are any cases in which this is
exploitable. One interesting case was reported by the original author
of this patch, and involves visiting guest page tables on x86. Right
now these are not vulnerable because the hva read goes through get_user(),
which contains an LFENCE speculation barrier. However, there are
patches in progress for x86 uaccess.h to mask kernel addresses instead of
using LFENCE; once these land, a guest could use speculation to read
from the VMM's ring 3 address space. Other architectures such as ARM
already use the address masking method, and would be susceptible to
this same kind of data-dependent access gadgets. Therefore, this patch
proactively protects from these attacks by masking out-of-bounds gfns
in __gfn_to_hva_memslot, which blocks speculation of invalid hvas.
Sean Christopherson noted that this patch does not cover
kvm_read_guest_offset_cached. This however is limited to a few bytes
past the end of the cache, and therefore it is unlikely to be useful in
the context of building a chain of data dependent accesses.
Reported-by: Artemiy Margaritov <[email protected]>
Co-developed-by: Artemiy Margaritov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull orphan section fixes from Kees Cook:
"These two corner case fixes have been in -next for about a week:
- Avoid orphan section in ARM cpuidle (Arnd Bergmann)
- Avoid orphan section with !SMP (Nathan Chancellor)"
* tag 'orphans-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
vmlinux.lds.h: Avoid orphan section with !SMP
ARM: cpuidle: Avoid orphan section warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A collection of fixes for the regulator API that have come up since
the merge window, including a big batch of fixes from Axel Lin's usual
careful and detailed review.
The one stand out fix here is Dmitry Baryshkov's fix for an issue
where we fail to power on the parents of always on regulators during
system startup if they weren't already powered on"
* tag 'regulator-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits)
regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL
regulator: hi6421v600: Fix .vsel_mask setting
regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837
regulator: atc260x: Fix n_voltages and min_sel for pickable linear ranges
regulator: rtmv20: Fix to make regcache value first reading back from HW
regulator: mt6315: Fix function prototype for mt6315_map_mode
regulator: rtmv20: Add Richtek to Kconfig text
regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks
regulator: hisilicon: use the correct HiSilicon copyright
regulator: bd71828: Fix .n_voltages settings
regulator: bd70528: Fix off-by-one for buck123 .n_voltages setting
regulator: max77620: Silence deferred probe error
regulator: max77620: Use device_set_of_node_from_dev()
regulator: scmi: Fix off-by-one for linear regulators .n_voltages setting
regulator: core: resolve supply for boot-on/always-on regulators
regulator: fixed: Ensure enable_counter is correct if reg_domain_disable fails
regulator: Check ramp_delay_table for regulator_set_ramp_delay_regmap
regulator: fan53880: Fix missing n_voltages setting
regulator: da9121: Return REGULATOR_MODE_INVALID for invalid mode
regulator: fan53555: fix TCS4525 voltage calulation
...
|
|
Adds a stub needed to resolve a build conflict for the
fxls8962af driver.
|
|
If I2C is not compiled, there is no way we should see a call to
i2c_verify_client() on a device that is an i2c client. As such,
provide a stub to return NULL to resolve an associated build failure.
The build is failing with this link error
ld: fxls8962af-core.o: in function `fxls8962af_fifo_transfer':
fxls8962af-core.c: undefined reference to `i2c_verify_client'
Reported-by: Tom Rix <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Fixes: af959b7b96b8 ("iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads")
Reviewed-by: Sean Nyekjaer <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have been coming in over the last few weeks, the
usual mix of fixes:
- DT fixups for TI K3
- SATA drive detection fix for TI DRA7
- Power management fixes and a few build warning removals for OMAP
- OP-TEE fix to use standard API for UUID exporting
- DT fixes for a handful of i.MX boards
And a few other smaller items"
* tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
arm64: meson: select COMMON_CLK
soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable
optee: use export_uuid() to copy client UUID
arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
PM and build warning fixes for omaps
While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:
- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded
Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.
These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.
* tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
|
|
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: mips, mm (kfence, debug,
pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc,
lib, ocfs2, and mailmap"
* emailed patches from Andrew Morton <[email protected]>:
mailmap: use private address for Michel Lespinasse
ocfs2: fix data corruption by fallocate
lib: crc64: fix kernel-doc warning
mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY
mm/kasan/init.c: fix doc warning
proc: add .gitignore for proc-subset-pid selftest
hugetlb: pass head page to remove_hugetlb_page()
drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64
mm/page_alloc: fix counting of free pages after take off from buddy
mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests()
pid: take a reference when initializing `cad_pid`
kfence: use TASK_IDLE when awaiting allocation
Revert "MIPS: make userspace mapping young by default"
|
|
This reverts commit f685a533a7fab35c5d069dcd663f59c8e4171a75.
The MIPS cache flush logic needs to know whether the mapping was already
established to decide how to flush caches. This is done by checking the
valid bit in the PTE. The commit above breaks this logic by setting the
valid in the PTE in new mappings, which causes kernel crashes.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f685a533a7f ("MIPS: make userspace mapping young by default")
Reported-by: Zhou Yanjie <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Cc: Huang Pei <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless, netfilter and
wireguard trees.
The bpf vs lockdown+audit fix is the most notable.
Things haven't slowed down just yet, both in terms of regressions in
current release and largish fixes for older code, but we usually see a
slowdown only after -rc5.
Current release - regressions:
- virtio-net: fix page faults and crashes when XDP is enabled
- mlx5e: fix HW timestamping with CQE compression, and make sure they
are only allowed to coexist with capable devices
- stmmac:
- fix kernel panic due to NULL pointer dereference of
mdio_bus_data
- fix double clk unprepare when no PHY device is connected
Current release - new code bugs:
- mt76: a few fixes for the recent MT7921 devices and runtime power
management
Previous releases - regressions:
- ice:
- track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
- fix allowing VF to request more/less queues via virtchnl
- correct supported and advertised autoneg by using PHY
capabilities
- allow all LLDP packets from PF to Tx
- kbuild: quote OBJCOPY var to avoid a pahole call break the build
Previous releases - always broken:
- bpf, lockdown, audit: fix buggy SELinux lockdown permission checks
- mt76: address the recent FragAttack vulnerabilities not covered by
generic fixes
- ipv6: fix KASAN: slab-out-of-bounds Read in
fib6_nh_flush_exceptions
- Bluetooth:
- fix the erroneous flush_work() order, to avoid double free
- use correct lock to prevent UAF of hdev object
- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed
connect
- ieee802154: multiple fixes to error checking and return values
- igb: fix XDP with PTP enabled
- intel: add correct exception tracing for XDP
- tls: fix use-after-free when TLS offload device goes down and back
up
- ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
- netfilter: nft_ct: skip expectations for confirmed conntrack
- mptcp: fix falling back to TCP in presence of out of order packets
early in connection lifetime
- wireguard: switch from O(n) to a O(1) algorithm for maintaining
peers, fixing stalls and a large memory leak in the process
Misc:
- devlink: correct VIRTUAL port to not have phys_port attributes
- Bluetooth: fix VIRTIO_ID_BT assigned number
- net: return the correct errno code ENOBUF -> ENOMEM
- wireguard:
- peer: allocate in kmem_cache saving 25% on peer memory
- do not use -O3"
* tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: avoid link re-train during TC-MQPRIO configuration
sch_htb: fix refcount leak in htb_parent_to_leaf_offload
wireguard: allowedips: free empty intermediate nodes when removing single node
wireguard: allowedips: allocate nodes in kmem_cache
wireguard: allowedips: remove nodes in O(1)
wireguard: allowedips: initialize list head in selftest
wireguard: peer: allocate in kmem_cache
wireguard: use synchronize_net rather than synchronize_rcu
wireguard: do not use -O3
wireguard: selftests: make sure rp_filter is disabled on vethc
wireguard: selftests: remove old conntrack kconfig value
virtchnl: Add missing padding to virtchnl_proto_hdrs
ice: Allow all LLDP packets from PF to Tx
ice: report supported and advertised autoneg using PHY capabilities
ice: handle the VF VSI rebuild failure
ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared
ice: Fix allowing VF to request more/less queues via virtchnl
virtio-net: fix for skb_over_panic inside big mode
ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
fib: Return the correct errno code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix MSIs for platforms with "msi-map" device-tree property, which we
broke in v5.13-rc1 (Jean-Philippe Brucker)
- Add Krzysztof Wilczyński as PCI reviewer (Lorenzo Pieralisi)
* tag 'pci-v5.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/MSI: Fix MSIs for generic hosts that use device-tree's "msi-map"
MAINTAINERS: Add Krzysztof as PCI host/endpoint controllers reviewer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-06-04
This series contains updates to virtchnl header file and ice driver.
Brett fixes VF being unable to request a different number of queues then
allocated and adds clearing of VF_MBX_ATQLEN register for VF reset.
Haiyue handles error of rebuilding VF VSI during reset.
Paul fixes reporting of autoneg to use the PHY capabilities.
Dave allows LLDP packets without priority of TC_PRIO_CONTROL to be
transmitted.
Geert Uytterhoeven adds explicit padding to virtchnl_proto_hdrs
structure in the virtchnl header file.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Two big regression reverts in here, one for fbdev and one i915.
Otherwise it's mostly amdgpu display fixes, and tegra fixes.
fb:
- revert broken fb_defio patch
amdgpu:
- Display fixes
- FRU EEPROM error handling fix
- RAS fix
- PSP fix
- Releasing pinned BO fix
i915:
- Revert conversion to io_mapping_map_user() which lead to BUG_ON()
- Fix check for error valued returns in a selftest
tegra:
- SOR power domain race condition fix
- build warning fix
- runtime pm ref leak fix
- modifier fix"
* tag 'drm-fixes-2021-06-04-1' of git://anongit.freedesktop.org/drm/drm:
amd/display: convert DRM_DEBUG_ATOMIC to drm_dbg_atomic
drm/amdgpu: make sure we unpin the UVD BO
drm/amd/amdgpu:save psp ring wptr to avoid attack
drm/amd/display: Fix potential memory leak in DMUB hw_init
drm/amdgpu: Don't query CE and UE errors
drm/amd/display: Fix overlay validation by considering cursors
drm/amdgpu: refine amdgpu_fru_get_product_info
drm/amdgpu: add judgement for dc support
drm/amd/display: Fix GPU scaling regression by FS video support
drm/amd/display: Allow bandwidth validation for 0 streams.
Revert "i915: use io_mapping_map_user"
drm/i915/selftests: Fix return value check in live_breadcrumbs_smoketest()
Revert "fb_defio: Remove custom address_space_operations"
drm/tegra: Correct DRM_FORMAT_MOD_NVIDIA_SECTOR_LAYOUT
drm/tegra: sor: Fix AUX device reference leak
drm/tegra: Get ref for DP AUX channel, not its ddc adapter
drm/tegra: Fix shift overflow in tegra_shared_plane_atomic_update
drm/tegra: sor: Fully initialize SOR before registration
gpu: host1x: Split up client initalization and registration
drm/tegra: sor: Do not leak runtime PM reference
|
|
On m68k (Coldfire M547x):
CC drivers/net/ethernet/intel/i40e/i40e_main.o
In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9,
from drivers/net/ethernet/intel/i40e/i40e.h:41,
from drivers/net/ethernet/intel/i40e/i40e_main.c:12:
include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero]
153 | { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
| ^
include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~
On m68k, integers are aligned on addresses that are multiples of two,
not four, bytes. Hence the size of a structure containing integers may
not be divisible by 4.
Fix this by adding explicit padding.
Fixes: 1f7ea1cd6a374842 ("ice: Enable FDIR Configure for AVF")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Jesse Brandeburg <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
When receiving Alert Message, if it is not unexpected but is
unsupported for some reason, the port should return Not_Supported
Message response.
Also, according to PD3.0 Spec 6.5.2.1.4 Event Flags Field, the
OTP/OVP/OCP flags in the Event Flags field in Status Message no longer
require Get_PPS_Status Message to clear them. Thus remove it when
receiving Status Message with those flags being set.
In addition, add the missing AMS operations for Status Message.
Fixes: 64f7c494a3c0 ("typec: tcpm: Add support for sink PPS related messages")
Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance")
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add the VDO definition for USB PD rev 2.0 in the bindings and define a
new property snk-vdos-v1 containing legacy VDOs as the responses to the
port partner which only supports PD rev 2.0.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
BIT macro is not defined. Replace it with generic bit operations.
Fixes: 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties")
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
ssh://git.freedesktop.org/git/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.13-rc5
The most important change here fixes a race condition that causes either
HDA or (more frequently) display to malfunction because they race for
enabling the SOR power domain at probe time.
Other than that, there's a couple of build warnings for issues
introduced in v5.13 as well as some minor fixes, such as reference leak
plugs.
Signed-off-by: Dave Airlie <[email protected]>
From: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
bluetooth pull request for net:
- Fixes UAF and CVE-2021-3564
- Fix VIRTIO_ID_BT to use an unassigned ID
- Fix firmware loading on some Intel Controllers
Signed-off-by: David S. Miller <[email protected]>
|
|
caif_enroll_dev() can fail in some cases. Ingnoring
these cases can lead to memory leak due to not assigning
link_support pointer to anywhere.
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll")
Cc: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Added cfserl_release() function.
Cc: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It turned out that the VIRTIO_ID_* are not assigned in the virtio_ids.h
file in the upstream kernel. Picking the next free one was wrong and
there is a process that has been followed now.
See https://github.com/oasis-tcs/virtio-spec/issues/108 for details.
Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
The ST accelerators support a special type of quirky mounting matrix found
in ACPI systems, but not a generic mounting matrix such as from the device
tree.
Augment the ACPI hack to be a bit more generic and accept a mounting
matrix from device properties.
This makes it possible to fix orientation on the Ux500 HREF device.
Cc: Hans de Goede <[email protected]>
Cc: Denis Ciocca <[email protected]>
Cc: Daniel Drake <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Extend ST_SENSORS_LSM_CHANNELS() to a version that will accept extended
attributes named ST_SENSORS_LSM_CHANNELS_EXT() and wrap the former as a
specialized version of the former.
Cc: Hans de Goede <[email protected]>
Cc: Denis Ciocca <[email protected]>
Cc: Daniel Drake <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
All of the users of iio_read_mount_matrix() are using the very same
property name. Moreover, the property name is hard coded in the API
documentation.
Make this clear and avoid duplication now and in the future.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Sean Nyekjaer <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Currently when mlx4 maps the hca_core_clock page to the user space there
are read-modifiable registers, one of which is semaphore, on this page as
well as the clock counter. If user reads the wrong offset, it can modify
the semaphore and hang the device.
Do not map the hca_core_clock page to the user space unless the device has
been put in a backwards compatibility mode to support this feature.
After this patch, mlx4 core_clock won't be mapped to user space on the
majority of existing devices and the uverbs device time feature in
ibv_query_rt_values_ex() will be disabled.
Fixes: 52033cfb5aab ("IB/mlx4: Add mmap call to map the hardware clock")
Link: https://lore.kernel.org/r/9632304e0d6790af84b3b706d8c18732bc0d5e27.1622726305.git.leonro@nvidia.com
Signed-off-by: Shay Drory <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The util_est internal UTIL_AVG_UNCHANGED flag which is used to prevent
unnecessary util_est updates uses the LSB of util_est.enqueued. It is
exposed via _task_util_est() (and task_util_est()).
Commit 92a801e5d5b7 ("sched/fair: Mask UTIL_AVG_UNCHANGED usages")
mentions that the LSB is lost for util_est resolution but
find_energy_efficient_cpu() checks if task_util_est() returns 0 to
return prev_cpu early.
_task_util_est() returns the max value of util_est.ewma and
util_est.enqueued or'ed w/ UTIL_AVG_UNCHANGED.
So task_util_est() returning the max of task_util() and
_task_util_est() will never return 0 under the default
SCHED_FEAT(UTIL_EST, true).
To fix this use the MSB of util_est.enqueued instead and keep the flag
util_est internal, i.e. don't export it via _task_util_est().
The maximal possible util_avg value for a task is 1024 so the MSB of
'unsigned int util_est.enqueued' isn't used to store a util value.
As a caveat the code behind the util_est_se trace point has to filter
UTIL_AVG_UNCHANGED to see the real util_est.enqueued value which should
be easy to do.
This also fixes an issue report by Xuewen Yan that util_est_update()
only used UTIL_AVG_UNCHANGED for the subtrahend of the equation:
last_enqueued_diff = ue.enqueued - (task_util() | UTIL_AVG_UNCHANGED)
Fixes: b89997aa88f0b sched/pelt: Fix task util_est update filtering
Signed-off-by: Dietmar Eggemann <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Xuewen Yan <[email protected]>
Reviewed-by: Vincent Donnefort <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
With x86_64_defconfig and the following configs, there is an orphan
section warning:
CONFIG_SMP=n
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_KVM=y
CONFIG_PARAVIRT=y
ld: warning: orphan section `.data..decrypted' from `arch/x86/kernel/cpu/vmware.o' being placed in section `.data..decrypted'
ld: warning: orphan section `.data..decrypted' from `arch/x86/kernel/kvm.o' being placed in section `.data..decrypted'
These sections are created with DEFINE_PER_CPU_DECRYPTED, which
ultimately turns into __PCPU_ATTRS, which in turn has a section
attribute with a value of PER_CPU_BASE_SECTION + the section name. When
CONFIG_SMP is not set, the base section is .data and that is not
currently handled in any linker script.
Add .data..decrypted to PERCPU_DECRYPTED_SECTION, which is included in
PERCPU_INPUT -> PERCPU_SECTION, which is include in the x86 linker
script when either CONFIG_X86_64 or CONFIG_SMP is unset, taking care of
the warning.
Fixes: ac26963a1175 ("percpu: Introduce DEFINE_PER_CPU_DECRYPTED")
Link: https://github.com/ClangBuiltLinux/linux/issues/1360
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Tested-by: Nick Desaulniers <[email protected]> # build
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Current timer PD_T_SINK_WAIT_CAP is set to 240ms which will violate the
SinkWaitCapTimer (tTypeCSinkWaitCap 310 - 620 ms) defined in the PD
Spec if the port is faster enough when running the state machine. Set it
to the lower bound 310ms to ensure the timeout is in Spec.
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- memory leak fix in usbhid from Anirudh Rayabharam
- additions for a few new recognized generic key IDs from Dmitry
Torokhov
- Asus T101HA and Dell K15A quirks from Hans de Goede
- memory leak fix in amd_sfh from Basavaraj Natikar
- Win8 compatibility and Stylus fixes in multitouch driver from
Ahelenia Ziemiańska
- NULL pointer dereference fix in hid-magicmouse from Johan Hovold
- assorted other small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (33 commits)
HID: asus: Cleanup Asus T101HA keyboard-dock handling
HID: magicmouse: fix NULL-deref on disconnect
HID: intel-ish-hid: ipc: Add Alder Lake device IDs
HID: i2c-hid: fix format string mismatch
HID: amd_sfh: Fix memory leak in amd_sfh_work
HID: amd_sfh: Use devm_kzalloc() instead of kzalloc()
HID: ft260: improve error handling of ft260_hid_feature_report_get()
HID: magicmouse: fix crash when disconnecting Magic Trackpad 2
HID: gt683r: add missing MODULE_DEVICE_TABLE
HID: pidff: fix error return code in hid_pidff_init()
HID: logitech-hidpp: initialize level variable
HID: multitouch: Disable event reporting on suspend on the Asus T101HA touchpad
HID: core: Remove extraneous empty line before EXPORT_SYMBOL_GPL(hid_check_keys_pressed)
HID: hid-sensor-custom: Process failure of sensor_hub_set_feature()
HID: i2c-hid: Skip ELAN power-on command after reset
HID: usbhid: fix info leak in hid_submit_ctrl
HID: Add BUS_VIRTUAL to hid_connect logging
HID: multitouch: set Stylus suffix for Stylus-application devices, too
HID: multitouch: require Finger field to mark Win8 reports as MT
HID: remove the unnecessary redefinition of a macro
...
|
|
Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.
Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Reviewed-by: Alex Vesker <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When a netdev with active TLS offload goes down, tls_device_down is
called to stop the offload and tear down the TLS context. However, the
socket stays alive, and it still points to the TLS context, which is now
deallocated. If a netdev goes up, while the connection is still active,
and the data flow resumes after a number of TCP retransmissions, it will
lead to a use-after-free of the TLS context.
This commit addresses this bug by keeping the context alive until its
normal destruction, and implements the necessary fallbacks, so that the
connection can resume in software (non-offloaded) kTLS mode.
On the TX side tls_sw_fallback is used to encrypt all packets. The RX
side already has all the necessary fallbacks, because receiving
non-decrypted packets is supported. The thing needed on the RX side is
to block resync requests, which are normally produced after receiving
non-decrypted packets.
The necessary synchronization is implemented for a graceful teardown:
first the fallbacks are deployed, then the driver resources are released
(it used to be possible to have a tls_dev_resync after tls_dev_del).
A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback
mode. It's used to skip the RX resync logic completely, as it becomes
useless, and some objects may be released (for example, resync_async,
which is allocated and freed by the driver).
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
RCU synchronization is guaranteed to finish in finite time, unlike a
busy loop that polls a flag. This patch is a preparation for the bugfix
in the next patch, where the same synchronize_net() call will also be
used to sync with the TX datapath.
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit ccf953d8f3d6 makes framebuffers which use deferred I/O stop
displaying updates after the first one. This is because the pages
handled by fb_defio no longer have a page_mapping(). That prevents
page_mkclean() from marking the PTEs as clean, and so writes are only
noticed the first time.
Reported-by: Andy Shevchenko <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"A fix for permission checking with fanotify unpriviledged groups.
Also there's a small update in MAINTAINERS file for fanotify"
* tag 'fsnotify_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: fix permission model of unprivileged group
MAINTAINERS: Add Matthew Bobrowski as a reviewer
|
|
Checking for and processing RCU-nocb deferred wakeup upon user/guest
entry is only relevant when nohz_full runs on the local CPU, otherwise
the periodic tick should take care of it.
Make sure we don't needlessly pollute these fast-paths as a -3%
performance regression on a will-it-scale.per_process_ops has been
reported so far.
Fixes: 47b8ff194c1f (entry: Explicitly flush pending rcuog wakeup before last rescheduling point)
Fixes: 4ae7dc97f726 (entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point)
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Paul E. McKenney <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|