| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the process of debugging a system with an NVDIMM that was failing to
unlock it was found that the kernel is reporting 'locked' while the DIMM
security interface is 'frozen'. Unfortunately the security state is
tracked internally as an enum which prevents it from communicating the
difference between 'locked' and 'locked + frozen'. It follows that the
enum also prevents the kernel from communicating 'unlocked + frozen'
which would be useful for debugging why security operations like 'change
passphrase' are disabled.
Ditch the security state enum for a set of flags and introduce a new
sysfs attribute explicitly for the 'frozen' state. The regression risk
is low because the 'frozen' state was already blocked behind the
'locked' state, but will need to revisit if there were cases where
applications need 'frozen' to show up in the primary 'security'
attribute. The expectation is that communicating 'frozen' is mostly a
helper for debug and status monitoring.
Reviewed-by: Dave Jiang <[email protected]>
Reported-by: Jeff Moyer <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]>
Link: https://lore.kernel.org/r/156686729474.184120.5835135644278860826.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
The size of a submission queue element should always be 6 (64 bytes)
by spec.
However some controllers such as Apple's are not properly implementing
the standard and require a different size.
This provides the ground work for the subsequent quirks for these
controllers.
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Reviewed-by: Minwoo Im <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
|
|
This patch adds Get LBA Status command's opcode to the macro that is
used by the trace feature. Now we can see "get_lba_status" instead of
the opcode value itself.
Signed-off-by: Minwoo Im <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
|
|
NVMe 1.4 added Get LBA Status command with opcode 0x86.
Signed-off-by: Minwoo Im <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix fall-through warnings on arc and nds32 for multiple
configurations"
* tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
nds32: Mark expected switch fall-throughs
ARC: unwind: Mark expected switch fall-through
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: allmodconfig nds32):
include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/nds32/kernel/signal.c:362:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/nds32/kernel/signal.c:315:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
Reported-by: Michael Ellerman <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
|
|
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
arm/fixes
Hisilicon fixes for v5.3-rc
- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
and driver unbind crash
* tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi:
bus: hisi_lpc: Add .remove method to avoid driver unbind crash
bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
lib: logic_pio: Add logic_pio_unregister_range()
lib: logic_pio: Avoid possible overlap for unregistering regions
lib: logic_pio: Fix RCU usage
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The memory allocated for the atomic pool needs to have the same
mapping attributes that we use for remapping, so use
pgprot_dmacoherent instead of open coding it. Also deduct a
suitable zone to allocate the memory from based on the presence
of the DMA zones.
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
arch_dma_mmap_pgprot is used for two things:
1) to override the "normal" uncached page attributes for mapping
memory coherent to devices that can't snoop the CPU caches
2) to provide the special DMA_ATTR_WRITE_COMBINE semantics on older
arm systems and some mips platforms
Replace one with the pgprot_dmacoherent macro that is already provided
by arm and much simpler to use, and lift the DMA_ATTR_WRITE_COMBINE
handling to common code with an explicit arch opt-in.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]> # m68k
Acked-by: Paul Burton <[email protected]> # mips
|
|
Add pinctrl macros for J721E SoC. These macro definitions are
similar to that of AM6, but adding new definitions to avoid
any naming confusions in the soc dts files.
Acked-by: Nishanth Menon <[email protected]>
Signed-off-by: Lokesh Vutla <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Tero Kristo <[email protected]>
|
|
Patch moves some decoding functions from driver/usb/dwc3/debug.h driver
to driver/usb/common/debug.c file. These moved functions include:
dwc3_decode_get_status
dwc3_decode_set_clear_feature
dwc3_decode_set_address
dwc3_decode_get_set_descriptor
dwc3_decode_get_configuration
dwc3_decode_set_configuration
dwc3_decode_get_intf
dwc3_decode_set_intf
dwc3_decode_synch_frame
dwc3_decode_set_sel
dwc3_decode_set_isoch_delay
dwc3_decode_ctrl
These functions are used also in inroduced cdns3 driver.
All functions prefixes were changed from dwc3 to usb.
Also, function's parameters has been extended according to the name
of fields in standard SETUP packet.
Additionally, patch adds usb_decode_ctrl function to
include/linux/usb/ch9.h file.
Signed-off-by: Pawel Laszczak <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
Currently, we don't have vfs nodes for querying the underlying flash name
and flash id. This information is important especially when we want to
know the flash detail of the defective system. In order to support the
query, we add mtd_debugfs_populate() to create two debugfs nodes
(ie. partname and partid). The upper driver can assign the pointer to
partname and partid before calling mtd_device_register().
Signed-off-by: Zhuohao Lee <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
|
|
The rework of the posix-cpu-timers patch series dropped the empty
declaration of struct cpu_timer for the CONFIG_POSIX_TIMERS=n case which
causes the build to fail:
./include/linux/posix-timers.h:218:20: error: field 'cpu' has incomplete type
Add it back.
Fixes: 60bda037f1dd ("posix-cpu-timers: Utilize timerqueue for storage")
Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
This patchset implements IO cost model based work-conserving
proportional controller.
While io.latency provides the capability to comprehensively prioritize
and protect IOs depending on the cgroups, its protection is binary -
the lowest latency target cgroup which is suffering is protected at
the cost of all others. In many use cases including stacking multiple
workload containers in a single system, it's necessary to distribute
IO capacity with better granularity.
One challenge of controlling IO resources is the lack of trivially
observable cost metric. The most common metrics - bandwidth and iops
- can be off by orders of magnitude depending on the device type and
IO pattern. However, the cost isn't a complete mystery. Given
several key attributes, we can make fairly reliable predictions on how
expensive a given stream of IOs would be, at least compared to other
IO patterns.
The function which determines the cost of a given IO is the IO cost
model for the device. This controller distributes IO capacity based
on the costs estimated by such model. The more accurate the cost
model the better but the controller adapts based on IO completion
latency and as long as the relative costs across differents IO
patterns are consistent and sensible, it'll adapt to the actual
performance of the device.
Currently, the only implemented cost model is a simple linear one with
a few sets of default parameters for different classes of device.
This covers most common devices reasonably well. All the
infrastructure to tune and add different cost models is already in
place and a later patch will also allow using bpf progs for cost
models.
Please see the top comment in blk-iocost.c and documentation for
more details.
v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix
for a divide-by-zero bug in current_hweight() triggered by zero
inuse_sum.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Andy Newell <[email protected]>
Cc: Josef Bacik <[email protected]>
Cc: Rik van Riel <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
There are currently two start time timestamps - start_time_ns and
io_start_time_ns. The former marks the request allocation and and the
second issue-to-device time. The planned io.weight controller needs
to measure the total time bios take to execute after it leaves rq_qos
including the time spent waiting for request to become available,
which can easily dominate on saturated devices.
This patch adds request->alloc_time_ns which records when the request
allocation attempt started. As it isn't used for the usual stats,
make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and
QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are
no users and it's active only on queues which need it even when
compiled in.
v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME
gating as suggested by Jens.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Separate out blkcg_conf_get_disk() so that it can be used by blkcg
policy interface file input parsers before the policy is actually
enabled. This doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Instead of @node, pass in @q and @blkcg so that the alloc function has
more context. This doesn't cause any behavior change and will be used
by io.weight implementation.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Action sample doesn't properly handle psample_group pointer in overwrite
case. Following issues need to be fixed:
- In tcf_sample_init() function RCU_INIT_POINTER() is used to set
s->psample_group, even though we neither setting the pointer to NULL, nor
preventing concurrent readers from accessing the pointer in some way.
Use rcu_swap_protected() instead to safely reset the pointer.
- Old value of s->psample_group is not released or deallocated in any way,
which results resource leak. Use psample_group_put() on non-NULL value
obtained with rcu_swap_protected().
- The function psample_group_put() that released reference to struct
psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu
grace period when deallocating it. Extend struct psample_group with rcu
head and use kfree_rcu when freeing it.
Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Signed-off-by: Vlad Buslov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove two holes on 64bit arches, to bring the size
to one cache line exactly.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In some cases the interrupt line of a device is optional. Introduce a
new platform_get_irq_optional() that works much like platform_get_irq()
but does not output an error on failure to find the interrupt.
Signed-off-by: Thierry Reding <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Move program_hpx_type0(), program_hpx_type1(), etc., and enums
hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to
drivers/pci/pci-acpi.c as these functions and enums are ACPI-specific.
Move structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to
drivers/pci/pci.h as these are shared between drivers/pci/pci-acpi.c and
drivers/pci/probe.c.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczynski <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
The names of the hpp_type0, hpp_type1 and hpp_type2 structs suggest that
they're related to _HPP, when in fact they're related to _HPX.
The struct hpp_type0 denotes an _HPX Type 0 setting record that supersedes
the _HPP setting record, and it has been used interchangeably for _HPP as
per the ACPI specification (see version 6.3, section 6.2.9.1) which states
that it should be applied to PCI, PCI-X and PCI Express devices, with
settings being ignored if they are not applicable.
Rename them to hpx_type0, hpx_type1 and hpx_type2 to reflect their relation
to _HPX rather than _HPP.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczynski <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
mlx5 HW spec and bits updates:
1) Aya exposes IP-in-IP capability in mlx5_core.
2) Maxim exposes lag tx port affinity capabilities.
3) Moshe adds VNIC_ENV internal rq counter bits.
4) ODP capabilities for DC transport
Misc updates:
5) Saeed, two compiler warnings cleanups
6) Add XRQ legacy commands opcodes
7) Use refcount_t for refcount
8) fix a -Wstringop-truncation warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:
- A one-line change that affects only Tiny RCU that is needed
by the RISC-V guys, courtesy of Christoph Hellwig.
- An update to my email address. The old one still works, at
least most of the time.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
More headers needed to be fixed when moving greybus out of staging and
enabling the COMPILE_TEST option.
Add forward declarations for the needed structures.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Rui Miguel Silva <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Lockdep reports a circular locking dependency with pages_lock taken in
the shrinker callback. The deadlock can't actually happen with current
users at least as a BO will never be purgeable when pages_lock is held.
To be safe, let's use mutex_trylock() instead and bail if a BO is locked
already.
WARNING: possible circular locking dependency detected
5.3.0-rc1+ #100 Tainted: G L
------------------------------------------------------
kswapd0/171 is trying to acquire lock:
000000009b9823fd (&shmem->pages_lock){+.+.}, at: drm_gem_shmem_purge+0x20/0x40
but task is already holding lock:
00000000f82369b6 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x40
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}:
fs_reclaim_acquire.part.18+0x34/0x40
fs_reclaim_acquire+0x20/0x28
__kmalloc_node+0x6c/0x4c0
kvmalloc_node+0x38/0xa8
drm_gem_get_pages+0x80/0x1d0
drm_gem_shmem_get_pages+0x58/0xa0
drm_gem_shmem_get_pages_sgt+0x48/0xd0
panfrost_mmu_map+0x38/0xf8 [panfrost]
panfrost_gem_open+0xc0/0xe8 [panfrost]
drm_gem_handle_create_tail+0xe8/0x198
drm_gem_handle_create+0x3c/0x50
panfrost_gem_create_with_handle+0x70/0xa0 [panfrost]
panfrost_ioctl_create_bo+0x48/0x80 [panfrost]
drm_ioctl_kernel+0xb8/0x110
drm_ioctl+0x244/0x3f0
do_vfs_ioctl+0xbc/0x910
ksys_ioctl+0x78/0xa8
__arm64_sys_ioctl+0x1c/0x28
el0_svc_common.constprop.0+0x90/0x168
el0_svc_handler+0x28/0x78
el0_svc+0x8/0xc
-> #0 (&shmem->pages_lock){+.+.}:
__lock_acquire+0xa2c/0x1d70
lock_acquire+0xdc/0x228
__mutex_lock+0x8c/0x800
mutex_lock_nested+0x1c/0x28
drm_gem_shmem_purge+0x20/0x40
panfrost_gem_shrinker_scan+0xc0/0x180 [panfrost]
do_shrink_slab+0x208/0x500
shrink_slab+0x10c/0x2c0
shrink_node+0x28c/0x4d8
balance_pgdat+0x2c8/0x570
kswapd+0x22c/0x638
kthread+0x128/0x130
ret_from_fork+0x10/0x18
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&shmem->pages_lock);
lock(fs_reclaim);
lock(&shmem->pages_lock);
*** DEADLOCK ***
3 locks held by kswapd0/171:
#0: 00000000f82369b6 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x40
#1: 00000000ceb37808 (shrinker_rwsem){++++}, at: shrink_slab+0xbc/0x2c0
#2: 00000000f31efa81 (&pfdev->shrinker_lock){+.+.}, at: panfrost_gem_shrinker_scan+0x34/0x180 [panfrost]
Fixes: 17acb9f35ed7 ("drm/shmem: Add madvise state and purge helpers")
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Acked-by: Alyssa Rosenzweig <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Contrary to the description, the first parameter (n) should not be passed
as a pointer, but directly as an lvalue. This is possible because do_div() is
a macro.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Michael Guralnik says:
====================
The series adds support for on-demand paging for DC transport.
As DC is a mlx-only transport, the capabilities are exposed to the user
using DEVX objects and later on through mlx5dv_query_device.
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'mlx5-odp-dc':
IB/mlx5: Add page fault handler for DC initiator WQE
IB/mlx5: Remove check of FW capabilities in ODP page fault handling
net/mlx5: Set ODP capabilities for DC transport to max
|
|
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h
to include/linux/pci.h so users only need to include <linux/pci.h>:
PCIE_LINK_STATE_L0S
PCIE_LINK_STATE_L1
PCIE_LINK_STATE_CLKPM
pci_disable_link_state()
pci_disable_link_state_locked()
pcie_no_aspm()
No functional changes intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczynski <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
Add kernel doc annotation for HRTIMER_MODE_HARD.
Fixes: ae6683d815895 ("hrtimer: Introduce HARD expiry mode")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Most of the modern codecs supports 352.8KHz and 384KHz sample rates.
Currenlty HW params fails to set 352.8Kz and 384KHz sample rate
as these are not in known rates list.
Add these new rates to known list to allow them.
This patch also adds defines in pcm.h so that drivers can use it.
Signed-off-by: Vidyakumar Athota <[email protected]>
Signed-off-by: Banajit Goswami <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The MT6358 is a regulator found on boards based on MediaTek MT8183 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Signed-off-by: Hsin-Hsiung Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Set the recommended BESL deep and baseline values based on the gadget's
configuration parameters to the extended BOS descriptor. This feature
helps to optimize power savings by maximizing the opportunity for longer
L1 residency time.
Signed-off-by: Thinh Nguyen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
Currently there's no option for the controller driver to report the
recommended Best Effort Service Latency (BESL) when operating with LPM
support. Add new fields in usb_dcd_config_params to export the
recommended baseline and deep BESL values for the function drivers to
set the proper BESL value in the BOS descriptor.
Signed-off-by: Thinh Nguyen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
Using a linear O(N) search for timer insertion affects execution time and
D-cache footprint badly with a larger number of timers.
Switch the storage to a timerqueue which is already used for hrtimers and
alarmtimers. It does not affect the size of struct k_itimer as it.alarm is
still larger.
The extra list head for the expiry list will go away later once the expiry
is moved into task work context.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Put it where it belongs and clean up the ifdeffery in fork completely.
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Deactivation of the expiry cache is done by setting all clock caches to
0. That requires to have a check for zero in all places which update the
expiry cache:
if (cache == 0 || new < cache)
cache = new;
Use U64_MAX as the deactivated value, which allows to remove the zero
checks when updating the cache and reduces it to the obvious check:
if (new < cache)
cache = new;
This also removes the weird workaround in do_prlimit() which was required
to convert a RLIMIT_CPU value of 0 (immediate expiry) to 1 because handing
in 0 to the posix CPU timer code would have effectively disarmed it.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
That allows more simplifications in various places.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Now that the abused struct task_cputime is gone, it's more natural to
bundle the expiry cache and the list head of each clock into a struct and
have an array of those structs.
Follow the hrtimer naming convention of 'bases' and rename the expiry cache
to 'nextevt' and adapt all usage sites.
Generates also better code .text size shrinks by 80 bytes.
Suggested-by: Ingo Molnar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The last users of the magic struct cputime based expiry cache are
gone. Remove the leftovers.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The last users of the odd define based renaming of struct task_cputime
members are gone. Good riddance.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Using struct task_cputime for the expiry cache is a pretty odd choice and
comes with magic defines to rename the fields for usage in the expiry
cache.
struct task_cputime is basically a u64 array with 3 members, but it has
distinct members.
The expiry cache content is different than the content of task_cputime
because
expiry[PROF] = task_cputime.stime + task_cputime.utime
expiry[VIRT] = task_cputime.utime
expiry[SCHED] = task_cputime.sum_exec_runtime
So there is no direct mapping between task_cputime and the expiry cache and
the #define based remapping is just a horrible hack.
Having the expiry cache array based allows further simplification of the
expiry code.
To avoid an all in one cleanup which is hard to review add a temporary
anonymous union into struct task_cputime which allows array based access to
it. That requires to reorder the members. Add a build time sanity check to
validate that the members are at the same place.
The union and the build time checks will be removed after conversion.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The expiry cache belongs into the posix_cputimers container where the other
cpu timers information is.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
For upcoming posix-timer changes to avoid include recursion hell.
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Per task/process data of posix CPU timers is all over the place which
makes the code hard to follow and requires ifdeffery.
Create a container to hold all this information in one place, so data is
consolidated and the ifdeffery can be confined to the posix timer header
file and removed from places like fork.
As a first step, move the cpu_timers list head array into the new struct
and clean up the initializers and simplify fork. The remaining #ifdef in
fork will be removed later.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
thread_group_cputimer() is a complete misnomer. The function does two things:
- For arming process wide timers it makes sure that the atomic time
storage is up to date. If no cpu timer is armed yet, then the atomic
time storage is not updated by the scheduler for performance reasons.
In that case a full summing up of all threads needs to be done and the
update needs to be enabled.
- Samples the current time into the caller supplied storage.
Rename it to thread_group_start_cputime(), make it static and fixup the
callsite.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
get_itimer() needs a sample of the current thread group cputime. It invokes
thread_group_cputimer() - which is a misnomer. That function also starts
eventually the group cputime accouting which is bogus because the
accounting is already active when a timer is armed.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
nor->params.setup() configures the SPI NOR memory. Useful for SPI NOR
flashes that have peculiarities to the SPI NOR standard, e.g.
different opcodes, specific address calculation, page size, etc.
Right now the only user will be the S3AN chips, but other
manufacturers can implement it if needed.
Move spi_nor_setup() related code in order to avoid a forward
declaration to spi_nor_default_setup().
Signed-off-by: Tudor Ambarus <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Reviewed-by: Vignesh Raghavendra <[email protected]>
|
|
In order to separate manufacturer quirks from the core we need to get
rid of all the manufacturer specific flags, like the
SNOR_F_S3AN_ADDR_DEFAULT one.
This can easily be replaced by a ->convert_addr() hook, which when
implemented will provide the core with an easy way to convert an
absolute address into something the flash understands.
Right now the only user are the S3AN chips, but other manufacturers
can implement it if needed.
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Reviewed-by: Vignesh Raghavendra <[email protected]>
|