| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
... turning it into struct p_log embedded into fs_context. Initialize
the prefix with fs_type->name, turning fs_parse() into a trivial
inline wrapper for __fs_parse().
This makes fs_parameter_description->name completely unused.
Signed-off-by: Al Viro <[email protected]>
|
|
... and now errorf() et.al. are never called with NULL fs_context,
so we can get rid of conditional in those.
Signed-off-by: Al Viro <[email protected]>
|
|
fs_parse() analogue taking p_log instead of fs_context.
fs_parse() turned into a wrapper, callers in ceph_common and rbd
switched to __fs_parse().
As the result, fs_parse() never gets NULL fs_context and neither
do fs_context-based logging primitives
Signed-off-by: Al Viro <[email protected]>
|
|
primitives for prefixed logging
Signed-off-by: Al Viro <[email protected]>
|
|
Signed-off-by: Al Viro <[email protected]>
|
|
Its behaviour is identical to that of fs_value_is_filename.
It makes no sense, anyway - LOOKUP_EMPTY affects nothing
whatsoever once the pathname has been imported from userland.
And both fs_value_is_filename and fs_value_is_filename_empty
carry an already imported pathname.
Signed-off-by: Al Viro <[email protected]>
|
|
Have the arrays of constant_table self-terminated (by NULL ->name
in the final entry). Simplifies lookup_constant() and allows to
reuse the search for enum params as well.
Signed-off-by: Al Viro <[email protected]>
|
|
It turns out that this wasn't a good idea, I hit a test failure in
hwsim due to this. That particular failure was easily worked around,
but it raised questions: if an AP needs to, for example, send action
frames to each connected station, the current limit is nowhere near
enough (especially if those stations are sleeping and the frames are
queued for a while.)
Shuffle around some bits to make more room for ack_frame_id to allow
up to 8192 queued up frames, that's enough for queueing 4 frames to
each connected station, even at the maximum of 2007 stations on a
single AP.
We take the bits from band (which currently only 2 but I leave 3 in
case we add another band) and from the hw_queue, which can only need
4 since it has a limit of 16 queues.
Fixes: 6912daed05e1 ("mac80211: Shrink the size of ack_frame_id to make room for tx_time_est")
Signed-off-by: Johannes Berg <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/r/20200115122549.b9a4ef9f4980.Ied52ed90150220b83a280009c590b65d125d087c@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
zonefs is a very simple file system exposing each zone of a zoned block
device as a file. Unlike a regular file system with zoned block device
support (e.g. f2fs), zonefs does not hide the sequential write
constraint of zoned block devices to the user. Files representing
sequential write zones of the device must be written sequentially
starting from the end of the file (append only writes).
As such, zonefs is in essence closer to a raw block device access
interface than to a full featured POSIX file system. The goal of zonefs
is to simplify the implementation of zoned block device support in
applications by replacing raw block device file accesses with a richer
file API, avoiding relying on direct block device file ioctls which may
be more obscure to developers. One example of this approach is the
implementation of LSM (log-structured merge) tree structures (such as
used in RocksDB and LevelDB) on zoned block devices by allowing SSTables
to be stored in a zone file similarly to a regular file system rather
than as a range of sectors of a zoned device. The introduction of the
higher level construct "one file is one zone" can help reducing the
amount of changes needed in the application as well as introducing
support for different application programming languages.
Zonefs on-disk metadata is reduced to an immutable super block to
persistently store a magic number and optional feature flags and
values. On mount, zonefs uses blkdev_report_zones() to obtain the device
zone configuration and populates the mount point with a static file tree
solely based on this information. E.g. file sizes come from the device
zone type and write pointer offset managed by the device itself.
The zone files created on mount have the following characteristics.
1) Files representing zones of the same type are grouped together
under a common sub-directory:
* For conventional zones, the sub-directory "cnv" is used.
* For sequential write zones, the sub-directory "seq" is used.
These two directories are the only directories that exist in zonefs.
Users cannot create other directories and cannot rename nor delete
the "cnv" and "seq" sub-directories.
2) The name of zone files is the number of the file within the zone
type sub-directory, in order of increasing zone start sector.
3) The size of conventional zone files is fixed to the device zone size.
Conventional zone files cannot be truncated.
4) The size of sequential zone files represent the file's zone write
pointer position relative to the zone start sector. Truncating these
files is allowed only down to 0, in which case, the zone is reset to
rewind the zone write pointer position to the start of the zone, or
up to the zone size, in which case the file's zone is transitioned
to the FULL state (finish zone operation).
5) All read and write operations to files are not allowed beyond the
file zone size. Any access exceeding the zone size is failed with
the -EFBIG error.
6) Creating, deleting, renaming or modifying any attribute of files and
sub-directories is not allowed.
7) There are no restrictions on the type of read and write operations
that can be issued to conventional zone files. Buffered, direct and
mmap read & write operations are accepted. For sequential zone files,
there are no restrictions on read operations, but all write
operations must be direct IO append writes. mmap write of sequential
files is not allowed.
Several optional features of zonefs can be enabled at format time.
* Conventional zone aggregation: ranges of contiguous conventional
zones can be aggregated into a single larger file instead of the
default one file per zone.
* File ownership: The owner UID and GID of zone files is by default 0
(root) but can be changed to any valid UID/GID.
* File access permissions: the default 640 access permissions can be
changed.
The mkzonefs tool is used to format zoned block devices for use with
zonefs. This tool is available on Github at:
[email protected]:damien-lemoal/zonefs-tools.git.
zonefs-tools also includes a test suite which can be run against any
zoned block device, including null_blk block device created with zoned
mode.
Example: the following formats a 15TB host-managed SMR HDD with 256 MB
zones with the conventional zones aggregation feature enabled.
$ sudo mkzonefs -o aggr_cnv /dev/sdX
$ sudo mount -t zonefs /dev/sdX /mnt
$ ls -l /mnt/
total 0
dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq
The size of the zone files sub-directories indicate the number of files
existing for each type of zones. In this example, there is only one
conventional zone file (all conventional zones are aggregated under a
single file).
$ ls -l /mnt/cnv
total 137101312
-rw-r----- 1 root root 140391743488 Nov 25 13:23 0
This aggregated conventional zone file can be used as a regular file.
$ sudo mkfs.ext4 /mnt/cnv/0
$ sudo mount -o loop /mnt/cnv/0 /data
The "seq" sub-directory grouping files for sequential write zones has
in this example 55356 zones.
$ ls -lv /mnt/seq
total 14511243264
-rw-r----- 1 root root 0 Nov 25 13:23 0
-rw-r----- 1 root root 0 Nov 25 13:23 1
-rw-r----- 1 root root 0 Nov 25 13:23 2
...
-rw-r----- 1 root root 0 Nov 25 13:23 55354
-rw-r----- 1 root root 0 Nov 25 13:23 55355
For sequential write zone files, the file size changes as data is
appended at the end of the file, similarly to any regular file system.
$ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0
The written file can be truncated to the zone size, preventing any
further write operation.
$ truncate -s 268435456 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0
Truncation to 0 size allows freeing the file zone storage space and
restart append-writes to the file.
$ truncate -s 0 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0
Since files are statically mapped to zones on the disk, the number of
blocks of a file as reported by stat() and fstat() indicates the size
of the file zone.
$ stat /mnt/seq/0
File: /mnt/seq/0
Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
Device: 870h/2160d Inode: 50431 Links: 1
Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2019-11-25 13:23:57.048971997 +0900
Modify: 2019-11-25 13:52:25.553805765 +0900
Change: 2019-11-25 13:52:25.553805765 +0900
Birth: -
The number of blocks of the file ("Blocks") in units of 512B blocks
gives the maximum file size of 524288 * 512 B = 256 MB, corresponding
to the device zone size in this example. Of note is that the "IO block"
field always indicates the minimum IO size for writes and corresponds
to the device physical sector size.
This code contains contributions from:
* Johannes Thumshirn <[email protected]>,
* Darrick J. Wong <[email protected]>,
* Christoph Hellwig <[email protected]>,
* Chaitanya Kulkarni <[email protected]> and
* Ting Yao <[email protected]>.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
|
|
no real difference now
Signed-off-by: Al Viro <[email protected]>
|
|
Don't do a single array; attach them to fsparam_enum() entry
instead. And don't bother trying to embed the names into those -
it actually loses memory, with no real speedup worth mentioning.
Simplifies validation as well.
Signed-off-by: Al Viro <[email protected]>
|
|
As it is, vfs_parse_fs_string() makes "foo" and "foo=" indistinguishable;
both get fs_value_is_string for ->type and NULL for ->string. To make
it even more unpleasant, that combination is impossible to produce with
fsconfig().
Much saner rules would be
"foo" => fs_value_is_flag, NULL
"foo=" => fs_value_is_string, ""
"foo=bar" => fs_value_is_string, "bar"
All cases are distinguishable, all results are expressable by fsconfig(),
->has_value checks are much simpler that way (to the point of the field
being useless) and quite a few regressions go away (gfs2 has no business
accepting -o nodebug=, for example).
Partially based upon patches from Miklos.
Signed-off-by: Al Viro <[email protected]>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.6-2020-02-05:
amdgpu:
- EDC fixes for Arcturus
- GDDR6 memory training fixe
- Fix for reading gfx clockgating registers while in GFXOFF state
- i2c freq fixes
- Misc display fixes
- TLB invalidation fix when using semaphores
- VCN 2.5 instancing fixes
- Switch raven1 gfxoff to a blacklist
- Coreboot workaround for KV/KB
- Root cause dongle fixes for display and revert workaround
- Enable GPU reset for renoir and navi
- Navi overclocking fixes
- Fix up confusing warnings in display clock validation on raven
amdkfd:
- SDMA fix
radeon:
- Misc LUT fixes
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Deprecate the generic TLS cap bit, use the new TX-specific
TLS cap bit instead.
Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Pull more KVM updates from Paolo Bonzini:
"s390:
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
x86:
- Bug fixes and cleanups
- AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
- Compilation fix.
Generic:
- Fix refcount overflow for zero page"
* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
x86: vmxfeatures: rename features for consistency with KVM and manual
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
KVM: x86: Fix perfctr WRMSR for running counters
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
kvm: mmu: Separate generating and setting mmio ptes
kvm: mmu: Replace unsigned with unsigned int for PTE access
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
x86/kvm: do not setup pv tlb flush when not paravirtualized
KVM: fix overflow of zero page refcount with ksm running
KVM: x86: Take a u64 when checking for a valid dr7 value
KVM: x86: use raw clock values consistently
KVM: x86: reorganize pvclock_gtod_data members
KVM: nVMX: delete meaningless nested_vmx_run() declaration
KVM: SVM: allow AVIC without split irqchip
kvm: ioapic: Lazy update IOAPIC EOI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending small fixes:
ALSA core:
- PCM memory leak fix
ASoC:
- Lots of SOF and Intel driver fixes
- Addition of COMMON_CLK for wcd934x
- Regression fixes for AMD and Tegra platforms
HD-audio:
- DP-MST HDMI regression fix, Tegra workarounds, HP quirk fix
Others:
- A few fixes relevant with the recent uapi-updates
- Sparse warnings and endianness fixes"
* tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Clear RIRB status before reading WP
ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported
ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS
ALSA: hda - Fix DP-MST support for NVIDIA codecs
ASoC: wcd934x: Add missing COMMON_CLK dependency
MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs
ASoC: tegra: Revert 24 and 32 bit support
ASoC: SOF: Intel: add PCI ID for JasperLake
ALSA: hdsp: Make the firmware loading ioctl a bit more readable
ALSA: emu10k1: Fix annotation and cast for the recent uapi header change
ALSA: dummy: Fix PCM format loop in proc output
ALSA: usb-audio: Annotate endianess in Scarlett gen2 quirk
ALSA: usb-audio: Fix endianess in descriptor validation
ALSA: hda: Add JasperLake PCI ID and codec vid
ALSA: pcm: Fix sparse warnings wrt snd_pcm_state_t
ALSA: pcm: Fix memory leak at closing a stream without hw_free
ALSA: uapi: Fix sparse warning
ASoC: rt715: Add __maybe_unused to PM callbacks
ASoC: rt711: Add __maybe_unused to PM callbacks
ASoC: rt700: Add __maybe_unused to PM callbacks
...
|
|
sk_buff.qlen can be accessed concurrently as noticed by KCSAN,
BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg
read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96:
unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821
net/unix/af_unix.c:1761
____sys_sendmsg+0x33e/0x370
___sys_sendmsg+0xa6/0xf0
__sys_sendmsg+0x69/0xf0
__x64_sys_sendmsg+0x51/0x70
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99:
__skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029
__skb_try_recv_datagram+0xbe/0x220
unix_dgram_recvmsg+0xee/0x850
____sys_recvmsg+0x1fb/0x210
___sys_recvmsg+0xa2/0xf0
__sys_recvmsg+0x66/0xf0
__x64_sys_recvmsg+0x51/0x70
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Since only the read is operating as lockless, it could introduce a logic
bug in unix_recvq_full() due to the load tearing. Fix it by adding
a lockless variant of skb_queue_len() and unix_recvq_full() where
READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to
the commit d7d16a89350a ("net: add skb_queue_empty_lockless()").
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull ceph fixes from Ilya Dryomov:
- a set of patches that fixes various corner cases in mount and umount
code (Xiubo Li). This has to do with choosing an MDS, distinguishing
between laggy and down MDSes and parsing the server path.
- inode initialization fixes (Jeff Layton). The one included here
mostly concerns things like open_by_handle() and there is another one
that will come through Al.
- copy_file_range() now uses the new copy-from2 op (Luis Henriques).
The existing copy-from op turned out to be infeasible for generic
filesystem use; we disable the copy offload if OSDs don't support
copy-from2.
- a patch to link "rbd" and "block" devices together in sysfs (Hannes
Reinecke)
... and a smattering of cleanups from Xiubo, Jeff and Chengguang.
* tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits)
rbd: set the 'device' link in sysfs
ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
ceph: print name of xattr in __ceph_{get,set}xattr() douts
ceph: print r_direct_hash in hex in __choose_mds() dout
ceph: use copy-from2 op in copy_file_range
ceph: close holes in structs ceph_mds_session and ceph_mds_request
rbd: work around -Wuninitialized warning
ceph: allocate the correct amount of extra bytes for the session features
ceph: rename get_session and switch to use ceph_get_mds_session
ceph: remove the extra slashes in the server path
ceph: add possible_max_rank and make the code more readable
ceph: print dentry offset in hex and fix xattr_version type
ceph: only touch the caps which have the subset mask requested
ceph: don't clear I_NEW until inode metadata is fully populated
ceph: retry the same mds later after the new session is opened
ceph: check availability of mds cluster on mount after wait timeout
ceph: keep the session state until it is released
ceph: add __send_request helper
ceph: ensure we have a new cap before continuing in fill_inode
ceph: drop unused ttl_from parameter from fill_inode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
|
|
Pull io_uring updates from Jens Axboe:
"Some later fixes for io_uring:
- Small cleanup series from Pavel
- Belt and suspenders build time check of sqe size and layout
(Stefan)
- Addition of ->show_fdinfo() on request of Jann Horn, to aid in
understanding mapped personalities
- eventfd recursion/deadlock fix, for both io_uring and aio
- Fixup for send/recv handling
- Fixup for double deferral of read/write request
- Fix for potential double completion event for close request
- Adjust fadvise advice async/inline behavior
- Fix for shutdown hang with SQPOLL thread
- Fix for potential use-after-free of fixed file table"
* tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
io_uring: cleanup fixed file data table references
io_uring: spin for sq thread to idle on shutdown
aio: prevent potential eventfd recursion on poll
io_uring: put the flag changing code in the same spot
io_uring: iterate req cache backwards
io_uring: punt even fadvise() WILLNEED to async context
io_uring: fix sporadic double CQE entry for close
io_uring: remove extra ->file check
io_uring: don't map read/write iovec potentially twice
io_uring: use the proper helpers for io_send/recv
io_uring: prevent potential eventfd recursion on poll
eventfd: track eventfd_signal() recursion depth
io_uring: add BUILD_BUG_ON() to assert the layout of struct io_uring_sqe
io_uring: add ->show_fdinfo() for the io_uring file descriptor
|
|
Pull libata updates from Jens Axboe:
- Add a Sandisk CF card to supported pata_pcmcia list (Christian)
- Move pata_arasan_cf away from legacy API (Peter)
- Ensure ahci DMA/ints are shut down on shutdown (Prabhakar)
* tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel()
ata: ahci: Add shutdown to freeze hardware resources of ahci
pata_pcmia: add SanDisk High (>8G) CF card to supported list
|
|
Depending on include order:
include/linux/of_clk.h:11:45: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration
unsigned int of_clk_get_parent_count(struct device_node *np);
^~~~~~~~~~~
include/linux/of_clk.h:12:43: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration
const char *of_clk_get_parent_name(struct device_node *np, int index);
^~~~~~~~~~~
include/linux/of_clk.h:13:31: warning: ‘struct of_device_id’ declared inside parameter list will not be visible outside of this definition or declaration
void of_clk_init(const struct of_device_id *matches);
^~~~~~~~~~~~
Fix this by adding forward declarations for struct device_node and
struct of_device_id.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Mostly cleanups and minor improvements with some new chip support for
some drivers"
* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: Remove set but not set variable 'pwm'
pwm: sun4i: Initialize variables before use
pwm: stm32: Remove automatic output enable
pwm: sun4i: Narrow scope of local variable
pwm: bcm2835: Allow building for ARCH_BRCMSTB
pwm: imx27: Eliminate error message for defer probe
pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
pwm: sun4i: Move pwm_calculate() out of spin_lock()
pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
pwm: omap-dmtimer: put_device() after of_find_device_by_node()
pwm: omap-dmtimer: Simplify error handling
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
pwm: Implement tracing for .get_state() and .apply_state()
pwm: rcar: Document inability to set duty_cycle = 0
pwm: rcar: Drop useless call to pwm_get_state()
pwm: Fix minor Kconfig whitespace issues
pwm: atmel: Implement .get_state()
pwm: atmel: Use register accessors for channels
pwm: atmel: Document known weaknesses of both hardware and software
pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
...
|
|
Untangle the way how dma_direct_map_page calls into swiotlb to be able
to properly report errors where the swiotlb DMA address overflows the
mask separately from overflows in the !swiotlb case. This means that
siotlb_map now has to do a little more work that duplicates
dma_direct_map_page, but doing so greatly simplifies the calling
convention.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Konrad Rzeszutek Wilk <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Allow compiling the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba7537) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various
drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/amd: Remove the unnecessary assignment
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
iommu/vt-d: Unnecessary to handle default identity domain
iommu/vt-d: Allow devices with RMRRs to use identity domain
iommu/vt-d: Add RMRR base and end addresses sanity check
iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
iommu/amd: Remove unused struct member
iommu/amd: Replace two consecutive readl calls with one readq
iommu/vt-d: Don't reject Host Bridge due to scope mismatch
PCI/ATS: Add PASID stubs
iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
iommu/arm-smmu-v3: Improve add_device() error handling
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
iommu/arm-smmu-v3: Add second level of context descriptor table
iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
iommu/arm-smmu-v3: Propagate ssid_bits
iommu/arm-smmu-v3: Add support for Substream IDs
iommu/arm-smmu-v3: Add context descriptor tables allocators
iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
ACPI/IORT: Parse SSID property of named component node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix a bug introduced in 5.5 in the Xen gntdev driver
- fix the Xen balloon driver when running on ancient Xen versions
- allow Xen stubdoms to control interrupt enable flags of
passed-through PCI cards
- release resources in Xen backends under memory pressure
* tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/blkback: Consistently insert one empty line between functions
xen/blkback: Remove unnecessary static variable name prefixes
xen/blkback: Squeeze page pools if a memory pressure is detected
xenbus/backend: Protect xenbus callback with lock
xenbus/backend: Add memory pressure handler callback
xen/gntdev: Do not use mm notifiers with autotranslating guests
xen/balloon: Support xend-based toolstack take two
xen-pciback: optionally allow interrupt enable flag writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes and cleanups for 5.6
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
|
|
syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.
First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF
This patch removes ipx_hdr() since it was only (mis)used from bonding.
Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.
BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
(if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
[<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline]
[<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53
[<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282
[<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline]
[<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline]
[<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422
[<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469
[<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
[<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline]
[<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224
[<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline]
[<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline]
[<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline]
[<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627
[<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238
[<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278
[<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline]
[<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252
[<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline]
[<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684
[<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996
[<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline]
[<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Jay Vosburgh <[email protected]>
Cc: Veaceslav Falico <[email protected]>
Cc: Andy Gospodarek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Replace with appropriate types.h.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Replace with appropriate types.h.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs recursive removal updates from Al Viro:
"We have quite a few places where synthetic filesystems do an
equivalent of 'rm -rf', with varying amounts of code duplication,
wrong locking, etc. That really ought to be a library helper.
Only debugfs (and very similar tracefs) are converted here - I have
more conversions, but they'd never been in -next, so they'll have to
wait"
* 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs timestamp updates from Al Viro:
"More 64bit timestamp work"
* 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: don't bother with timestamp truncation
fs: Do not overload update_time
fs: Delete timespec64_trunc()
fs: ubifs: Eliminate timespec64_trunc() usage
fs: ceph: Delete timespec64_trunc() usage
fs: cifs: Delete usage of timespec64_trunc
fs: fat: Eliminate timespec64_trunc() usage
utimes: Clamp the timestamps in notify_change()
|
|
When the directory is large and it's being modified by one client
while another client is doing the 'ls -l' on the same directory then
the cache page invalidation from nfs_force_use_readdirplus causes
the reading client to keep restarting READDIRPLUS from cookie 0
which causes the 'ls -l' to take a very long time to complete,
possibly never completing.
Currently when nfs_force_use_readdirplus is called to switch from
READDIR to READDIRPLUS, it invalidates all the cached pages of the
directory. This cache page invalidation causes the next nfs_readdir
to re-read the directory content from cookie 0.
This patch is to optimise the cache invalidation in
nfs_force_use_readdirplus by only truncating the cached pages from
last page index accessed to the end the file. It also marks the
inode to delay invalidating all the cached page of the directory
until the next initial nfs_readdir of the next 'ls' instance.
Signed-off-by: Dai Ngo <[email protected]>
Reviewed-by: Trond Myklebust <[email protected]>
[Anna - Fix conflicts with Trond's readdir patches]
[Anna - Remove redundant call to nfs_zap_mapping()]
[Anna - Replace d_inode(file_dentry(desc->file)) with file_inode(desc->file)]
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Pull Microblaze update from Michal Simek:
- enable CMA
- add support for MB v11
- defconfig updates
- minor fixes
* tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add ID for Microblaze v11
microblaze: Prevent the overflow of the start
microblaze: Wire CMA allocator
asm-generic: Make dma-contiguous.h a mandatory include/asm header
microblaze: Sync defconfig with latest Kconfig layout
microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers
microblaze: Align comments with register usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Try to preserve holes in sparse files when copying up, thus saving
disk space and improving performance.
- Fix a performance regression introduced in v4.19 by preserving
asynchronicity of IO when fowarding to underlying layers. Add VFS
helpers to submit async iocbs.
- Fix a regression in lseek(2) introduced in v4.19 that breaks >2G
seeks on 32bit kernels.
- Fix a corner case where st_ino/st_dev was not preserved across copy
up.
- Miscellaneous fixes and cleanups.
* tag 'ovl-update-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix lseek overflow on 32bit
ovl: add splice file read write helper
ovl: implement async IO routines
vfs: add vfs_iocb_iter_[read|write] helper functions
ovl: layer is const
ovl: fix corner case of non-constant st_dev;st_ino
ovl: fix corner case of conflicting lower layer uuid
ovl: generalize the lower_fs[] array
ovl: simplify ovl_same_sb() helper
ovl: generalize the lower_layers[] array
ovl: improving copy-up efficiency for big sparse file
ovl: use ovl_inode_lock in ovl_llseek()
ovl: use pr_fmt auto generate prefix
ovl: fix wrong WARN_ON() in ovl_cache_update_ino()
|
|
dma-continuguous.h is generic for all architectures except arm32 which has
its own version.
Similar change was done for msi.h by commit a1b39bae16a6
("asm-generic: Make msi.h a mandatory include/asm header")
Suggested-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Paul Walmsley <[email protected]> # for arch/riscv
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the Mediatek MT8183 SCP, modem remoteproc on
Qualcomm SC7180 platform, audio and sensor remoteprocs on Qualcomm
MSM8998 and audio, compute, modem and sensor remoteprocs on Qualcomm
SM8150.
It adds votes for necessary power-domains for all Qualcomm TrustZone
based remoteproc instances are held, fixes a bug related to remoteproc
drivers registering before the core has been initialized and does
clean up the Qualcomm modem remoteproc driver"
* tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (21 commits)
remoteproc: qcom: q6v5-mss: Improve readability of reset_assert
remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeout
remoteproc: qcom: q6v5-mss: Rename boot status timeout
remoteproc: qcom: q6v5-mss: Improve readability across clk handling
remoteproc: use struct_size() helper
remoteproc: Initialize rproc_class before use
rpmsg: add rpmsg support for mt8183 SCP.
remoteproc/mediatek: add SCP support for mt8183
dt-bindings: Add a binding for Mediatek SCP
remoteproc: mss: q6v5-mss: Add modem support on SC7180
dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support
dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC
remoteproc: q6v5-mss: Remove mem clk from the active pool
remoteproc: qcom: Remove unneeded semicolon
remoteproc: qcom: pas: Add auto_boot flag
remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem and SLPI support
dt-bindings: remoteproc: qcom: SM8150 Add ADSP, CDSP, MPSS and SLPI support
remoteproc: qcom: pas: Vote for active/proxy power domains
dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS
...
|
|
Merge more updates from Andrew Morton:
"The rest of MM and the rest of everything else: hotfixes, ipc, misc,
procfs, lib, cleanups, arm"
* emailed patches from Andrew Morton <[email protected]>: (67 commits)
ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
treewide: remove redundant IS_ERR() before error code check
include/linux/cpumask.h: don't calculate length of the input string
lib: new testcases for bitmap_parse{_user}
lib: rework bitmap_parse()
lib: make bitmap_parse_user a wrapper on bitmap_parse
lib: add test for bitmap_parse()
bitops: more BITS_TO_* macros
lib/string: add strnchrnul()
proc: convert everything to "struct proc_ops"
proc: decouple proc from VFS with "struct proc_ops"
asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
asm-generic/tlb: add missing CONFIG symbol
asm-gemeric/tlb: remove stray function declarations
asm-generic/tlb: avoid potential double flush
mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
...
|
|
Pull drm ttm/mm updates from Dave Airlie:
"Thomas Hellstrom has some more changes to the TTM layer that needed a
patch to the mm subsystem.
This adds a new mm API vmf_insert_mixed_prot to avoid an ugly hack
that has limitations in the TTM layer"
* tag 'drm-next-2020-02-04' of git://anongit.freedesktop.org/drm/drm:
mm, drm/ttm: Fix vm page protection handling
mm: Add a vmf_insert_mixed_prot() function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"CrOS EC:
- Refactoring of some of cros_ec's headers:
include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to
drivers/platform/chrome which contains shared operations of cros_ec
transport drivers.
- Response tracing in cros_ec_proto
Wilco EC:
- Fix unregistration order.
- Fix keyboard backlight probing on systems without keyboard
backlight
- Minor cleanup (newlines in printks, COMPILE_TEST)
Misc:
- chromeos_laptop converted to use i2c_new_scanned_device instead of
i2c_new_probed_device"
* tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Match implementation with headers
platform/chrome: cros_ec: Drop unaligned.h include
platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST
platform/chrome: wilco_ec: Add newlines to printks
platform/chrome: wilco_ec: Fix unregistration order
cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
platform/chrome: cros_ec_ishtp: Make init_lock static
platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device
platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs
platform/chrome: cros_ec_proto: Add response tracing
platform/chrome: cros_ec_trace: Match trace commands with EC commands
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The VL_READ and VL_CLR ioctls have been reworked to be more useful.
This will not break userspace as there are very few users and they are
using the integer value as a boolean.
Apart from that, two drivers were reworked and a few fixes here and
there for a net reduction of number of lines.
Summary:
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior
is unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
REGMAP_I2C and REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
sama5d2 compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support"
* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
dt-bindings: rtc: at91rm9200: document clocks property
rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
rtc: Kconfig: select REGMAP_I2C when necessary
rtc: Kconfig: properly indent sd3078 entry
rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
rtc: cmos: Use predefined value for RTC IRQ on legacy x86
rtc: cmos: Stop using shared IRQ
rtc: tps6586x: Use IRQ_NOAUTOEN flag
rtc: at91rm9200: use FIELD_PREP/FIELD_GET
rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
rtc: at91rm9200: move register definitions to C file
rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
dt-bindings: rtc: at91rm9200: convert bindings to json-schema
rtc: at91rm9200: remove procfs information
dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
rtc: pcf8563: Use BIT
rtc: moxart: Convert to SPDX identifier
rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
rtc: rx8025: Remove struct i2c_client from struct rx8025_data
rtc: hym8563: Read the valid flag directly instead of caching it
...
|
|
New design of inner bitmap_parse() allows to avoid calculating the size of
a null-terminated string.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Yury Norov <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Amritha Nambiar <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Steffen Klassert <[email protected]>
Cc: "Tobin C . Harding" <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
bitmap_parse() is ineffective and full of opaque variables and opencoded
parts. It leads to hard understanding and usage of it. This rework
includes:
- remove bitmap_shift_left() call from the cycle. Now it makes the
complexity of the algorithm as O(nbits^2). In the suggested approach
the input string is parsed in reverse direction, so no shifts needed;
- relax requirement on a single comma and no white spaces between
chunks. It is considered useful in scripting, and it aligns with
bitmap_parselist();
- split bitmap_parse() to small readable helpers;
- make an explicit calculation of the end of input line at the
beginning, so users of the bitmap_parse() won't bother doing this.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Yury Norov <[email protected]>
Cc: Amritha Nambiar <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Steffen Klassert <[email protected]>
Cc: "Tobin C . Harding" <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Introduce BITS_TO_U64, BITS_TO_U32 and BITS_TO_BYTES as they are handy in
the following patches (BITS_TO_U32 specifically). Reimplement tools/
version of the macros according to the kernel implementation.
Also fix indentation for BITS_PER_TYPE definition.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Yury Norov <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Amritha Nambiar <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Steffen Klassert <[email protected]>
Cc: "Tobin C . Harding" <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "lib: rework bitmap_parse", v5.
Similarl to the recently revisited bitmap_parselist(), bitmap_parse() is
ineffective and overcomplicated. This series reworks it, aligns its
interface with bitmap_parselist() and makes it simpler to use.
The series also adds a test for the function and fixes usage of it in
cpumask_parse() according to the new design - drops the calculating of
length of an input string.
bitmap_parse() takes the array of numbers to be put into the map in the BE
order which is reversed to the natural LE order for bitmaps. For example,
to construct bitmap containing a bit on the position 42, we have to put a
line '400,0'. Current implementation reads chunk one by one from the
beginning ('400' before '0') and makes bitmap shift after each successful
parse. It makes the complexity of the whole process as O(n^2). We can do
it in reverse direction ('0' before '400') and avoid shifting, but it
requires reverse parsing helpers.
This patch (of 7):
New function works like strchrnul() with a length limited string.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Yury Norov <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Amritha Nambiar <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: "Tobin C . Harding" <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steffen Klassert <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[[email protected]: fix drivers/isdn/capi/kcapi_proc.c]
[[email protected]: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
Save ~184 bytes per usage:
add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function old new delta
sysvipc_proc_ops - 72 +72
...
config_gz_proc_ops - 72 +72
proc_get_inode 289 339 +50
proc_reg_get_unmapped_area 110 107 -3
close_pdeo 227 224 -3
proc_reg_open 289 284 -5
proc_create_data 60 53 -7
rt_cpu_seq_fops 256 - -256
...
default_affinity_proc_fops 256 - -256
Total: Before=5430095, After=5425343, chg -0.09%
Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
As described in the comment, the correct order for freeing pages is:
1) unhook page
2) TLB invalidate page
3) free page
This order equally applies to page directories.
Currently there are two correct options:
- use tlb_remove_page(), when all page directores are full pages and
there are no futher contraints placed by things like software
walkers (HAVE_FAST_GUP).
- use MMU_GATHER_RCU_TABLE_FREE and tlb_remove_table() when the
architecture does not do IPI based TLB invalidate and has
HAVE_FAST_GUP (or software TLB fill).
This however leaves architectures that don't have page based directories
but don't need RCU in a bind. For those, provide MMU_GATHER_TABLE_FREE,
which provides the independent batching for directories without the
additional RCU freeing.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Cc: Michael Ellerman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Towards a more consistent naming scheme.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Cc: Michael Ellerman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|