| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For the cases that some kernel (module) path stamps the crash reserved
memory(already mapped by the kernel) where has been loaded the second
kernel data, the kdump kernel will probably fail to boot when panic
happens (or even not happens) leaving the culprit at large, this is
unacceptable.
The patch introduces a mechanism for detecting such cases:
1) After each crash kexec loading, it simply marks the reserved memory
regions readonly since we no longer access it after that. When someone
stamps the region, the first kernel will panic and trigger the kdump.
The weak arch_kexec_protect_crashkres() is introduced to do the actual
protection.
2) To allow multiple loading, once 1) was done we also need to remark
the reserved memory to readwrite each time a system call related to
kdump is made. The weak arch_kexec_unprotect_crashkres() is introduced
to do the actual protection.
The architecture can make its specific implementation by overriding
arch_kexec_protect_crashkres() and arch_kexec_unprotect_crashkres().
Signed-off-by: Xunlei Pang <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Minfei Huang <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Baoquan He <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
All the users of siginmask() must ensure that sig < SIGRTMIN. sig_fatal()
doesn't and this is wrong:
UBSAN: Undefined behaviour in kernel/signal.c:911:6
shift exponent 32 is too large for 32-bit type 'long unsigned int'
the patch doesn't add the neccesary check to sig_fatal(), it moves the
check into siginmask() and updates other callers.
Link: http://lkml.kernel.org/r/[email protected]
Reported-by: Meelis Roos <[email protected]>
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently the size of "struct signal_struct"->oom_flags member is
sizeof(unsigned) bytes, but only one flag OOM_FLAG_ORIGIN which is
updated by current thread is defined. We can convert OOM_FLAG_ORIGIN
into a bool, and reuse the saved bytes for updating from the OOM killer
and/or the OOM reaper thread.
By the way, do we care about a race window between run_store() and
swapoff() because it would be theoretically possible that two threads
sharing the "struct signal_struct" concurrently call respective
functions? If we care, we can make oom_flags an atomic_t.
Signed-off-by: Tetsuo Handa <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This fixes block comments with proper formatting to eliminate the
following checkpatch.pl warnings:
"WARNING: Block comments use * on subsequent lines"
"WARNING: Block comments use a trailing */ on a separate line"
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This fixes checkpatch.pl warning "WARNING: Prefer 'unsigned int' to
bare use of 'unsigned'".
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
E-mail addresses of osrg.net domain are no longer available. This
removes them from authorship notices and prevents reporters from being
confused.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This removes the extra paragraph which mentions FSF address in GPL
notices from source code of nilfs2 and avoids the checkpatch.pl error
related to it.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull drm updates from Dave Airlie:
"Here's the main drm pull request for 4.7, it's been a busy one, and
I've been a bit more distracted in real life this merge window. Lots
more ARM drivers, not sure if it'll ever end. I think I've at least
one more coming the next merge window.
But changes are all over the place, support for AMD Polaris GPUs is in
here, some missing GM108 support for nouveau (found in some Lenovos),
a bunch of MST and skylake fixes.
I've also noticed a few fixes from Arnd in my inbox, that I'll try and
get in asap, but I didn't think they should hold this up.
New drivers:
- Hisilicon kirin display driver
- Mediatek MT8173 display driver
- ARC PGU - bitstreamer on Synopsys ARC SDP boards
- Allwinner A13 initial RGB output driver
- Analogix driver for DisplayPort IP found in exynos and rockchip
DRM Core:
- UAPI headers fixes and C++ safety
- DRM connector reference counting
- DisplayID mode parsing for Dell 5K monitors
- Removal of struct_mutex from drivers
- Connector registration cleanups
- MST robustness fixes
- MAINTAINERS updates
- Lockless GEM object freeing
- Generic fbdev deferred IO support
panel:
- Support for a bunch of new panels
i915:
- VBT refactoring
- PLL computation cleanups
- DSI support for BXT
- Color manager support
- More atomic patches
- GEM improvements
- GuC fw loading fixes
- DP detection fixes
- SKL GPU hang fixes
- Lots of BXT fixes
radeon/amdgpu:
- Initial Polaris support
- GPUVM/Scheduler/Clock/Power improvements
- ASYNC pageflip support
- New mesa feature support
nouveau:
- GM108 support
- Power sensor support improvements
- GR init + ucode fixes.
- Use GPU provided topology information
vmwgfx:
- Add host messaging support
gma500:
- Some cleanups and fixes
atmel:
- Bridge support
- Async atomic commit support
fsl-dcu:
- Timing controller for LCD support
- Pixel clock polarity support
rcar-du:
- Misc fixes
exynos:
- Pipeline clock support
- Exynoss4533 SoC support
- HW trigger mode support
- export HDMI_PHY clock
- DECON5433 fixes
- Use generic prime functions
- use DMA mapping APIs
rockchip:
- Lots of little fixes
vc4:
- Render node support
- Gamma ramp support
- DPI output support
msm:
- Mostly cleanups and fixes
- Conversion to generic struct fence
etnaviv:
- Fix for prime buffer handling
- Allow hangcheck to be coalesced with other wakeups
tegra:
- Gamme table size fix"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
drm/edid: move displayid validation to it's own function.
drm/displayid: Iterate over all DisplayID blocks
drm/edid: move displayid tiled block parsing into separate function.
drm: Nuke ->vblank_disable_allowed
drm/vmwgfx: Report vmwgfx version to vmware.log
drm/vmwgfx: Add VMWare host messaging capability
drm/vmwgfx: Kill some lockdep warnings
drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
drm/nouveau/core: recognise GM108 chipsets
drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
drm/nouveau/gr/gk104-: share implementation of ppc exception init
drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
drm/nouveau/bios/pll: check BIT table version before trying to parse it
drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
drm/nouveau/volt/gk104: round up in gk104_volt_set
drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
drm/nouveau/fb/gf100-: allocate mmu debug buffers
drm/nouveau/fb: allow chipset-specific actions for oneinit()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this update was stabilized before the merge window and
appeared in -next. The "device dax" implementation was revised this
week in response to review feedback, and to address failures detected
by the recently expanded ndctl unit test suite.
Not included in this pull request are two dax topic branches (dax
error handling, and dax radix-tree locking). These topics were
deferred to get a few more days of -next integration testing, and to
coordinate a branch baseline with Ted and the ext4 tree. Vishal and
Ross will send the error handling and locking topics respectively in
the next few days.
This branch has received a positive build result from the kbuild robot
across 226 configs.
Summary:
- Device DAX for persistent memory: Device DAX is the device-centric
analogue of Filesystem DAX (CONFIG_FS_DAX). It allows memory
ranges to be allocated and mapped without need of an intervening
file system. Device DAX is strict, precise and predictable.
Specifically this interface:
a) Guarantees fault granularity with respect to a given page size
(pte, pmd, or pud) set at configuration time.
b) Enforces deterministic behavior by being strict about what
fault scenarios are supported.
Persistent memory is the first target, but the mechanism is also
targeted for exclusive allocations of performance/feature
differentiated memory ranges.
- Support for the HPE DSM (device specific method) command formats.
This enables management of these first generation devices until a
unified DSM specification materializes.
- Further ACPI 6.1 compliance with support for the common dimm
identifier format.
- Various fixes and cleanups across the subsystem"
* tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (40 commits)
libnvdimm, dax: fix deletion
libnvdimm, dax: fix alignment validation
libnvdimm, dax: autodetect support
libnvdimm: release ida resources
Revert "block: enable dax for raw block devices"
/dev/dax, core: file operations and dax-mmap
/dev/dax, pmem: direct access to persistent memory
libnvdimm: stop requiring a driver ->remove() method
libnvdimm, dax: record the specified alignment of a dax-device instance
libnvdimm, dax: reserve space to store labels for device-dax
libnvdimm, dax: introduce device-dax infrastructure
nfit: add sysfs dimm 'family' and 'dsm_mask' attributes
tools/testing/nvdimm: ND_CMD_CALL support
nfit: disable vendor specific commands
nfit: export subsystem ids as attributes
nfit: fix format interface code byte order per ACPI6.1
nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism
nfit, libnvdimm: clarify "commands" vs "_DSMs"
libnvdimm: increase max envelope size for ioctl
acpi/nfit: Add sysfs "id" for NVDIMM ID
...
|
|
'spi/topic/fsl-dspi', 'spi/topic/fsl-espi' and 'spi/topic/kconfig' into spi-next
|
|
The component master driver imx-drm-core matches component devices using
their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc
module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during
probing. Before that, of_node was set and caused an of: modalias to be
used instead of the platform: modalias, which broke module autoloading.
On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc
probe function calls component_add, component matching in imx-drm-core
fails. While dev->of_node will be set once the next component tries to
bring up the component master, imx-drm-core component binding will never
succeed if one of the crtc devices is probed last.
Add of_node to the component platform data and match against the
pdata->of_node instead of dev->of_node in imx-drm-core to work around
this problem.
Cc: <[email protected]> # 4.4.x
Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading")
Signed-off-by: Philipp Zabel <[email protected]>
Tested-by: Fabio Estevam <[email protected]>
Tested-by: Lothar Waßmann <[email protected]>
Tested-by: Heiko Schocher <[email protected]>
Tested-by: Chris Ruehl <[email protected]>
|
|
Add a helper which aids in the identification of DP dual mode
(aka. DP++) adaptors. There are several types of adaptors
specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI
Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors
may go as high as 300MHz and they provide a register informing the
source device what the actual limit is. Supposedly also type 1 adaptors
may optionally implement this register. This TMDS clock limit is the
main reason why we need to identify these adaptors.
Type 1 adaptors provide access to their internal registers and the sink
DDC bus through I2C. Type 2 adaptors provide this access both via I2C
and I2C-over-AUX. A type 2 source device may choose to implement either
of these methods. If a source device implements the I2C-over-AUX
method, then the driver will obviously need specific support for such
adaptors since the port is driven like an HDMI port, but DDC
communication happes over the AUX channel.
This helper should be enough to identify the adaptor type (some
type 1 DVI adaptors may be a slight exception) and the maximum TMDS
clock limit. Another feature that may be available is control over
the TMDS output buffers on the adaptor, possibly allowing for some
power saving when the TMDS link is down.
Other user controllable features that may be available in the adaptors
are downstream i2c bus speed control when using i2c-over-aux, and
some control over the CEC pin. I chose not to provide any helper
functions for those since I have no use for them in i915 at this time.
The rest of the registers in the adaptor are mostly just information,
eg. IEEE OUI, hardware and firmware revision, etc.
v2: Pass adaptor type to helper functions to ease driver implementation
Fix a bunch of typoes (Paulo)
Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know
the type (Paulo)
Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo)
Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to
ease future LSPCON enabling
Remove the unused DP_DUAL_MODE_LAST_RESERVED define
v3: Fix kernel doc function argument descriptions (Jani)
s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs
Add kernel doc for enum drm_dp_dual_mode_type
Actually build the docs
Fix more typoes
v4: Adjust code indentation of type2 adaptor detection (Shashank)
Add debug messages for failurs cases (Shashank)
v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo)
Cc: [email protected]
Cc: Tore Anderson <[email protected]>
Cc: Paulo Zanoni <[email protected]>
Cc: Shashank Sharma <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Shashank Sharma <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Shashank Sharma <[email protected]> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ede53344dbfd1dd43bfd73eb6af743d37c56a7c3)
Signed-off-by: Jani Nikula <[email protected]>
|
|
The tiled 5K Dell monitor appears to be hiding it's tiled mode
inside the displayid timings block, this patch parses this
blocks and adds the modes to the modelist.
v1.1: add missing __packed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95207
Signed-off-by: Dave Airlie <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, as Ted pointed out, fscrypto allows one more key prefix
given by filesystem to resolve backward compatibility issues. Other
than that, we've fixed several error handling cases by introducing
a fault injection facility. We've also achieved performance
improvement in some workloads as well as a bunch of bug fixes.
Summary:
Enhancements:
- fs-specific prefix for fscrypto
- fault injection facility
- expose validity bitmaps for user to be aware of fragmentation
- fallocate/rm/preallocation speed up
- use percpu counters
Bug fixes:
- some inline_dentry/inline_data bugs
- error handling for atomic/volatile/orphan inodes
- recover broken superblock"
* tag 'for-f2fs-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (73 commits)
f2fs: fix to update dirty page count correctly
f2fs: flush pending bios right away when error occurs
f2fs: avoid ENOSPC fault in the recovery process
f2fs: make exit_f2fs_fs more clear
f2fs: use percpu_counter for total_valid_inode_count
f2fs: use percpu_counter for alloc_valid_block_count
f2fs: use percpu_counter for # of dirty pages in inode
f2fs: use percpu_counter for page counters
f2fs: use bio count instead of F2FS_WRITEBACK page count
f2fs: manipulate dirty file inodes when DATA_FLUSH is set
f2fs: add fault injection to sysfs
f2fs: no need inc dirty pages under inode lock
f2fs: fix incorrect error path handling in f2fs_move_rehashed_dirents
f2fs: fix i_current_depth during inline dentry conversion
f2fs: correct return value type of f2fs_fill_super
f2fs: fix deadlock when flush inline data
f2fs: avoid f2fs_bug_on during recovery
f2fs: show # of orphan inodes
f2fs: support in batch fzero in dnode page
f2fs: support in batch multi blocks preallocation
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
"This has our merge window series of cleanups and fixes. These target
a wide range of issues, but do include some important fixes for
qgroups, O_DIRECT, and fsync handling. Jeff Mahoney moved around a
few definitions to make them easier for userland to consume.
Also whiteout support is included now that issues with overlayfs have
been cleared up.
I have one more fix pending for page faults during btrfs_copy_from_user,
but I wanted to get this bulk out the door first"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (90 commits)
btrfs: fix memory leak during RAID 5/6 device replacement
Btrfs: add semaphore to synchronize direct IO writes with fsync
Btrfs: fix race between block group relocation and nocow writes
Btrfs: fix race between fsync and direct IO writes for prealloc extents
Btrfs: fix number of transaction units for renames with whiteout
Btrfs: pin logs earlier when doing a rename exchange operation
Btrfs: unpin logs if rename exchange operation fails
Btrfs: fix inode leak on failure to setup whiteout inode in rename
btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT
Btrfs: pin log earlier when renaming
Btrfs: unpin log if rename operation fails
Btrfs: don't do unnecessary delalloc flushes when relocating
Btrfs: don't wait for unrelated IO to finish before relocation
Btrfs: fix empty symlink after creating symlink and fsync parent dir
Btrfs: fix for incorrect directory entries after fsync log replay
btrfs: build fixup for qgroup_account_snapshot
btrfs: qgroup: Fix qgroup accounting when creating snapshot
Btrfs: fix fspath error deallocation
btrfs: make find_workspace warn if there are no workspaces
btrfs: make find_workspace always succeed
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"OMAP:
- Remove non-DT support from mailbox driver
- Move PM from client calls to native driver suspend/resume
- Trivial cleanups to make checkpatch happy
STI:
- Check return from devm_ioremap_resource as ERR_PTR, not NULL"
* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Fix devm_ioremap_resource error detection code
mailbox/omap: kill omap_mbox_{save/restore}_ctx() functions
mailbox/omap: check for any unread messages during suspend
mailbox/omap: add support for suspend/resume
mailbox/omap: store mailbox interrupt type in omap_mbox_device
mailbox/omap: add blank lines after declarations
mailbox/omap: remove FSF mailing address paragraph
mailbox/omap: use variable name for sizeof() operator
mailbox/omap: drop legacy platform device support
|
|
Merge more updates from Andrew Morton:
- the rest of MM
- KASAN updates
- procfs updates
- exit, fork updates
- printk updates
- lib/ updates
- radix-tree testsuite updates
- checkpatch updates
- kprobes updates
- a few other misc bits
* emailed patches from Andrew Morton <[email protected]>: (162 commits)
samples/kprobes: print out the symbol name for the hooks
samples/kprobes: add a new module parameter
kprobes: add the "tls" argument for j_do_fork
init/main.c: simplify initcall_blacklisted()
fs/efs/super.c: fix return value
checkpatch: improve --git <commit-count> shortcut
checkpatch: reduce number of `git log` calls with --git
checkpatch: add support to check already applied git commits
checkpatch: add --list-types to show message types to show or ignore
checkpatch: advertise the --fix and --fix-inplace options more
checkpatch: whine about ACCESS_ONCE
checkpatch: add test for keywords not starting on tabstops
checkpatch: improve CONSTANT_COMPARISON test for structure members
checkpatch: add PREFER_IS_ENABLED test
lib/GCD.c: use binary GCD algorithm instead of Euclidean
radix-tree: free up the bottom bit of exceptional entries for reuse
dax: move RADIX_DAX_ definitions to dax.c
radix-tree: make radix_tree_descend() more useful
radix-tree: introduce radix_tree_replace_clear_tags()
radix-tree: tidy up __radix_tree_create()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here's the big staging and iio driver update for 4.7-rc1.
I think we almost broke even with this release, only adding a few more
lines than we removed, which isn't bad overall given that there's a
bunch of new iio drivers added.
The Lustre developers seem to have woken up from their sleep and have
been doing a great job in cleaning up the code and pruning unused or
old cruft, the filesystem is almost readable :)
Other than that, just a lot of basic coding style cleanups in the
churn. All have been in linux-next for a while with no reported
issues"
* tag 'staging-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (938 commits)
Staging: emxx_udc: emxx_udc: fixed coding style issue
staging/gdm724x: fix "alignment should match open parenthesis" issues
staging/gdm724x: Fix avoid CamelCase
staging: unisys: rename misleading var ii with frag
staging: unisys: visorhba: switch success handling to error handling
staging: unisys: visorhba: main path needs to flow down the left margin
staging: unisys: visorinput: handle_locking_key() simplifications
staging: unisys: visorhba: fail gracefully for thread creation failures
staging: unisys: visornic: comment restructuring and removing bad diction
staging: unisys: fix format string %Lx to %llx for u64
staging: unisys: remove unused struct members
staging: unisys: visorchannel: correct variable misspelling
staging: unisys: visorhba: replace functionlike macro with function
staging: dgnc: Need to check for NULL of ch
staging: dgnc: remove redundant condition check
staging: dgnc: fix 'line over 80 characters'
staging: dgnc: clean up the dgnc_get_modem_info()
staging: lustre: lnet: enable configuration per NI interface
staging: lustre: o2iblnd: properly set ibr_why
staging: lustre: o2iblnd: remove last of kiblnd_tunables_fini
...
|
|
This reverts commit 5a023cdba50c5f5f2bc351783b3131699deb3937.
The functionality is superseded by the new "Device DAX" facility.
Cc: Jeff Moyer <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Jan Kara <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the "big" driver core update for 4.7-rc1.
Mostly just debugfs changes, the long-known and messy races with
removing debugfs files should be fixed thanks to the great work of
Nicolai Stange. We also have some isa updates in here (the x86
maintainers told me to take it through this tree), a new warning when
we run out of dynamic char major numbers, and a few other assorted
changes, details in the shortlog.
All have been in linux-next for some time with no reported issues"
* tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
Revert "base: dd: don't remove driver_data in -EPROBE_DEFER case"
gpio: ws16c48: Utilize the ISA bus driver
gpio: 104-idio-16: Utilize the ISA bus driver
gpio: 104-idi-48: Utilize the ISA bus driver
gpio: 104-dio-48e: Utilize the ISA bus driver
watchdog: ebc-c384_wdt: Utilize the ISA bus driver
iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros
iio: stx104: Add X86 dependency to STX104 Kconfig option
Documentation: Add ISA bus driver documentation
isa: Implement the max_num_isa_dev macro
isa: Implement the module_isa_driver macro
pnp: pnpbios: Add explicit X86_32 dependency to PNPBIOS
isa: Decouple X86_32 dependency from the ISA Kconfig option
driver-core: use 'dev' argument in dev_dbg_ratelimited stub
base: dd: don't remove driver_data in -EPROBE_DEFER case
kernfs: Move faulting copy_user operations outside of the mutex
devcoredump: add scatterlist support
debugfs: unproxify files created through debugfs_create_u32_array()
debugfs: unproxify files created through debugfs_create_blob()
debugfs: unproxify files created through debugfs_create_bool()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here's the big char and misc driver update for 4.7-rc1.
Lots of different tiny driver subsystems have updates here with new
drivers and functionality. Details in the shortlog.
All have been in linux-next with no reported issues for a while"
* tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits)
mcb: Delete num_cells variable which is not required
mcb: Fixed bar number assignment for the gdd
mcb: Replace ioremap and request_region with the devm version
mcb: Implement bus->dev.release callback
mcb: export bus information via sysfs
mcb: Correctly initialize the bus's device
mei: bus: call mei_cl_read_start under device lock
coresight: etb10: adjust read pointer only when needed
coresight: configuring ETF in FIFO mode when acting as link
coresight: tmc: implementing TMC-ETF AUX space API
coresight: moving struct cs_buffers to header file
coresight: tmc: keep track of memory width
coresight: tmc: make sysFS and Perf mode mutually exclusive
coresight: tmc: dump system memory content only when needed
coresight: tmc: adding mode of operation for link/sinks
coresight: tmc: getting rid of multiple read access
coresight: tmc: allocating memory when needed
coresight: tmc: making prepare/unprepare functions generic
coresight: tmc: splitting driver in ETB/ETF and ETR components
coresight: tmc: cleaning up header file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big pull request for USB and PHY drivers for 4.7-rc1
Full details in the shortlog, but it's the normal major gadget driver
updates, phy updates, new usbip code, as well as a bit of lots of
other stuff.
All have been in linux-next with no reported issues"
* tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits)
USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support
USB: serial: fix minor-number allocation
USB: serial: quatech2: fix use-after-free in probe error path
USB: serial: mxuport: fix use-after-free in probe error path
USB: serial: keyspan: fix debug and error messages
USB: serial: keyspan: fix URB unlink
USB: serial: keyspan: fix use-after-free in probe error path
USB: serial: io_edgeport: fix memory leaks in probe error path
USB: serial: io_edgeport: fix memory leaks in attach error path
usb: Remove unnecessary space before operator ','.
usb: Remove unnecessary space before open square bracket.
USB: FHCI: avoid redundant condition
usb: host: xhci-rcar: Avoid long wait in xhci_reset()
usb/host/fotg210: remove dead code in create_sysfs_files
usb: wusbcore: Do not initialise statics to 0.
usb: wusbcore: Remove space before ',' and '(' .
USB: serial: cp210x: clean up CRTSCTS flag code
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code
USB: serial: cp210x: fix hardware flow-control disable
USB: serial: option: add even more ZTE device ids
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here's the large TTY and Serial driver update for 4.7-rc1.
A few new serial drivers are added here, and Peter has fixed a bunch
of long-standing bugs in the tty layer and serial drivers as normal.
Full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
MAINTAINERS: 8250: remove website reference
serial: core: Fix port mutex assert if lockdep disabled
serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
tty: vt, finish looping on duplicate
tty: vt, return error when con_startup fails
QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
serial: 8250dw: Add device HID for future AMD UART controller
Fix OpenSSH pty regression on close
serial: mctrl_gpio: add IRQ locking
serial: 8250: Integrate Fintek into 8250_base
serial: mps2-uart: add support for early console
serial: mps2-uart: add MPS2 UART driver
dt-bindings: document the MPS2 UART bindings
serial: sirf: Use generic uart-has-rtscts DT property
serial: sirf: Introduce helper variable struct device_node *np
serial: mxs-auart: Use generic uart-has-rtscts DT property
serial: imx: Use generic uart-has-rtscts DT property
doc: DT: Add Generic Serial Device Tree Bindings
serial: 8250: of: Make tegra_serial_handle_break() static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It's the usual big pile of driver updates and additions, but we do
have a couple core changes in here as well.
Core:
- CLK_IS_CRITICAL support has been added. This should allow drivers
to properly express that a certain clk should stay on even if their
prepare/enable count drops to 0 (and in turn the parents of these
clks should stay enabled).
- A clk registration API has been added, clk_hw_register(), and an OF
clk provider API has been added, of_clk_add_hw_provider(). These
APIs have been put in place to further split clk providers from clk
consumers, with the goal being to have clk providers never deal
with struct clk pointers at all. Conversion of provider drivers is
on going. clkdev has also gained support for registering clk_hw
pointers directly so we can convert drivers that don't use
devicetree.
New Drivers:
- Marvell ap806 and cp110 system controllers (with clks inside!)
- Hisilicon Hi3519 clock and reset controller
- Axis ARTPEC-6 clock controllers
- Oxford Semiconductor OXNAS clock controllers
- AXS10X I2S PLL
- Rockchip RK3399 clock and reset controller
Updates:
- MMC2 and UART2 clks on Samsung Exynos 3250, ACLK on Samsung Exynos
542x SoCs, and some more clk ID exporting for bus frequency scaling
- Proper BCM2835 PCM clk support and various other clks
- i.MX clk updates for i.MX6SX, i.MX7, and VF610
- Renesas updates for R-Car H3
- Tegra210 got updates for DisplayPort and HDMI 2.0
- Rockchip driver refactorings and fixes due to adding RK3399 support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (139 commits)
clk: fix critical clock locking
clk: qcom: mmcc-8996: Remove clocks that should be controlled by RPM
clk: ingenic: Allow divider value to be divided
clk: sunxi: Add display and TCON0 clocks driver
clk: rockchip: drop old_rate calculation on pll rate changes
clk: rockchip: simplify GRF handling in pll clocks
clk: rockchip: lookup General Register Files in rockchip_clk_init
clk: rockchip: fix the rk3399 sdmmc sample / drv name
clk: mvebu: new driver for Armada CP110 system controller
dt-bindings: arm: add DT binding for Marvell CP110 system controller
clk: mvebu: new driver for Armada AP806 system controller
clk: hisilicon: add CRG driver for hi3519 soc
clk: hisilicon: export some hisilicon APIs to modules
reset: hisilicon: add reset controller driver for hisilicon SOCs
clk: bcm/kona: Do not use sizeof on pointer type
clk: qcom: msm8916: Fix crypto clock flags
clk: nxp: lpc18xx: Initialize clk_init_data::flags to 0
clk/axs10x: Add I2S PLL clock driver
clk: imx7d: fix ahb clock mux 1
clk: fix comment of devm_clk_hw_register()
...
|
|
Pull networking fixes and more updates from David Miller:
1) Tunneling fixes from Tom Herbert and Alexander Duyck.
2) AF_UNIX updates some struct sock bit fields with the socket lock,
whereas setsockopt() sets overlapping ones with locking. Seperate
out the synchronized vs. the AF_UNIX unsynchronized ones to avoid
corruption. From Andrey Ryabinin.
3) Mount BPF filesystem with mount_nodev rather than mount_ns, from
Eric Biederman.
4) A couple kmemdup conversions, from Muhammad Falak R Wani.
5) BPF verifier fixes from Alexei Starovoitov.
6) Don't let tunneled UDP packets get stuck in socket queues, if
something goes wrong during the encapsulation just drop the packet
rather than signalling an error up the call stack. From Hannes
Frederic Sowa.
7) SKB ref after free in batman-adv, from Florian Westphal.
8) TCP iSCSI, ocfs2, rds, and tipc have to disable BH in it's TCP
callbacks since the TCP stack runs pre-emptibly now. From Eric
Dumazet.
9) Fix crash in fixed_phy_add, from Rabin Vincent.
10) Fix length checks in xen-netback, from Paul Durrant.
11) Fix mixup in KEY vs KEYID macsec attributes, from Sabrina Dubroca.
12) RDS connection spamming bug fixes from Sowmini Varadhan
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits)
net: suppress warnings on dev_alloc_skb
uapi glibc compat: fix compilation when !__USE_MISC in glibc
udp: prevent skbs lingering in tunnel socket queues
bpf: teach verifier to recognize imm += ptr pattern
bpf: support decreasing order in direct packet access
net: usb: ch9200: use kmemdup
ps3_gelic: use kmemdup
net:liquidio: use kmemdup
bpf: Use mount_nodev not mount_ns to mount the bpf filesystem
net: cdc_ncm: update datagram size after changing mtu
tuntap: correctly wake up process during uninit
intel: Add support for IPv6 IP-in-IP offload
ip6_gre: Do not allow segmentation offloads GRE_CSUM is enabled with FOU/GUE
RDS: TCP: Avoid rds connection churn from rogue SYNs
RDS: TCP: rds_tcp_accept_worker() must exit gracefully when terminating rds-tcp
net: sock: move ->sk_shutdown out of bitfields.
ipv6: Don't reset inner headers in ip6_tnl_xmit
ip4ip6: Support for GSO/GRO
ip6ip6: Support for GSO/GRO
ipv6: Set features for IPv6 tunnels
...
|
|
Similar to commits:
51d7d5205d33 ("powerpc: Add smp_mb() to arch_spin_is_locked()")
d86b8da04dfa ("arm64: spinlock: serialise spin_unlock_wait against concurrent lockers")
qspinlock suffers from the fact that the _Q_LOCKED_VAL store is
unordered inside the ACQUIRE of the lock.
And while this is not a problem for the regular mutual exclusive
critical section usage of spinlocks, it breaks creative locking like:
spin_lock(A) spin_lock(B)
spin_unlock_wait(B) if (!spin_is_locked(A))
do_something() do_something()
In that both CPUs can end up running do_something at the same time,
because our _Q_LOCKED_VAL store can drop past the spin_unlock_wait()
spin_is_locked() loads (even on x86!!).
To avoid making the normal case slower, add smp_mb()s to the less used
spin_unlock_wait() / spin_is_locked() side of things to avoid this
problem.
Reported-and-tested-by: Davidlohr Bueso <[email protected]>
Reported-by: Giovanni Gherdovich <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected] # v4.2 and later
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We are guaranteed that pointers to radix_tree_nodes always have the
bottom two bits clear (because they come from a slab cache, and slab
caches have a minimum alignment of sizeof(void *)), so we can redefine
'radix_tree_is_internal_node' to only return true if the bottom two bits
have value '01'. This frees up one quarter of the potential values for
use by the user.
Idea from Neil Brown.
Signed-off-by: Matthew Wilcox <[email protected]>
Suggested-by: Neil Brown <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Ross Zwisler <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
These don't belong in radix-tree.h any more than PAGECACHE_TAG_* do.
Let's try to maintain the idea that radix-tree simply implements an
abstract data type.
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Ross Zwisler <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In addition to replacing the entry, we also clear all associated tags.
This is really a one-off special for page_cache_tree_delete() which had
far too much detailed knowledge about how the radix tree works.
For efficiency, factor node_tag_clear() out of radix_tree_tag_clear() It
can be used by radix_tree_delete_item() as well as
radix_tree_replace_clear_tags().
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Cc: Ross Zwisler <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
As with indirect_to_ptr(), ptr_to_indirect() and
RADIX_TREE_INDIRECT_PTR, change radix_tree_is_indirect_ptr() to
radix_tree_is_internal_node().
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Cc: Ross Zwisler <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Mirrors the earlier commit introducing node_to_entry().
Also change the type returned to be a struct radix_tree_node pointer.
That lets us simplify a couple of places in the radix tree shrink &
extend paths where we could convert an entry into a pointer, modify the
node, then convert the pointer back into an entry.
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Cc: Ross Zwisler <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The name RADIX_TREE_INDIRECT_PTR doesn't really match the meaning.
RADIX_TREE_INTERNAL_NODE is a better name.
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Cc: Ross Zwisler <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The only remaining references to root->height were in extend and shrink,
where it was updated. Now we can remove it entirely.
Signed-off-by: Matthew Wilcox <[email protected]>
Reviewed-by: Ross Zwisler <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
node->shift represents the shift necessary for looking in the slots
array at this level. It is equal to the old (node->height - 1) *
RADIX_TREE_MAP_SHIFT.
Signed-off-by: Matthew Wilcox <[email protected]>
Reviewed-by: Ross Zwisler <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Neither piece of information we're storing in node->path can be larger
than 64, so store each in its own unsigned char instead of shifting and
masking to store them both in an unsigned int.
Signed-off-by: Matthew Wilcox <[email protected]>
Reviewed-by: Ross Zwisler <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This enables the macros radix_tree_for_each_slot() and friends to be
used with multi-order entries.
The way that this works is that we treat all entries in a given slots[]
array as a single chunk. If the index given to radix_tree_next_chunk()
happens to point us to a sibling entry, we will back up iter->index so
that it points to the canonical entry, and that will be the place where
we start our iteration.
As we're processing a chunk in radix_tree_next_slot(), we process
canonical entries, skip over sibling entries, and restart the chunk
lookup if we find a non-sibling indirect pointer. This drops back to
the radix_tree_next_chunk() code, which will re-walk the tree and look
for another chunk.
This allows us to properly handle multi-order entries mixed with other
entries that are at various heights in the radix tree.
Signed-off-by: Ross Zwisler <[email protected]>
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
radix_tree_for_each_chunk() and radix_tree_for_each_chunk_slot() have
never been used in the kernel since their introduction in 2012, so
remove them.
Signed-off-by: Ross Zwisler <[email protected]>
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The defines in regression2.c are already in radix-tree.h and duplicating
them in the test case makes experimenting with other values for the
fan-out harder than necessary. Allow the user of the radix tree to
decide what the fan-out should be rather than fixing it to 8 for
non-kernel uses.
Signed-off-by: Ross Zwisler <[email protected]>
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Neil Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit e61452365372 ("radix_tree: add support for multi-order entries")
left the impression that the support for multiorder radix tree entries
was functional. As soon as Ross tried to use it, it became apparent
that my testing was completely inadequate, and it didn't even work a
little bit for orders that were not a multiple of shift.
This series of patches is the result of about 6 weeks of redesign,
reimplementation, testing, arguing and hair-pulling. The great news is
that the test-suite is now far better than it was. That's reflected in
the diffstat for the test-suite alone:
12 files changed, 436 insertions(+), 28 deletions(-)
The highlight for users of the tree is that the restriction on the order
of inserted entries being >= RADIX_TREE_MAP_SHIFT is now gone; the radix
tree now supports any order between 0 and 64.
For those who are interested in how the tree works, patch 9 is probably
the most interesting one as it introduces the new machinery for handling
sibling entries.
I've tried to be fair in attributing authorship to the person who
contributed the majority of the code in each patch; Ross has been an
invaluable partner in the development of this support and it's fair to
say that each of us has code in every commit.
I should also express my appreciation of the 0day testing. It prompted
me that I was bloating the tinyconfig in an unacceptable way, and it
bisected to a commit which contained a rather nasty memory-corruption
bug.
This patch (of 29):
The irqdomain code was checking for 0 or 1 entries, not 0 entries like
the comment said they were. Introduce a new helper that will actually
check for an empty tree.
Signed-off-by: Matthew Wilcox <[email protected]>
Reviewed-by: Ross Zwisler <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Kirill Shutemov <[email protected]>
Cc: Neil Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
UUID library provides uuid_be type and uuid_be_to_bin() function. This
substitutes open coded variant by generic library calls.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Cc: Dmitry Kasatkin <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Generic UUID library defines structure type, macro to define UUID, and
the length of the UUID string. This patch removes duplicate data
structure definition, UUID string length constant as well as macro for
UUID handling.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Cc: Dmitry Kasatkin <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There is no point in keeping an address in the file since it's subject
to change.
While here, update Intel Copyright years.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Cc: Dmitry Kasatkin <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are new helpers in this patch:
uuid_is_valid checks if a UUID is valid
uuid_be_to_bin converts from string to binary (big endian)
uuid_le_to_bin converts from string to binary (little endian)
They will be used in future, i.e. in the following patches in the series.
This also moves the indices arrays to lib/uuid.c to be shared accross
modules.
[[email protected]: fix typo]
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Cc: Dmitry Kasatkin <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Let's gather the UUID related functions under one hood.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Cc: Dmitry Kasatkin <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In NMI context, printk() messages are stored into per-CPU buffers to
avoid a possible deadlock. They are normally flushed to the main ring
buffer via an IRQ work. But the work is never called when the system
calls panic() in the very same NMI handler.
This patch tries to flush NMI buffers before the crash dump is
generated. In this case it does not risk a double release and bails out
when the logbuf_lock is already taken. The aim is to get the messages
into the main ring buffer when possible. It makes them better
accessible in the vmcore.
Then the patch tries to flush the buffers second time when other CPUs
are down. It might be more aggressive and reset logbuf_lock. The aim
is to get the messages available for the consequent kmsg_dump() and
console_flush_on_panic() calls.
The patch causes vprintk_emit() to be called even in NMI context again.
But it is done via printk_deferred() so that the console handling is
skipped. Consoles use internal locks and we could not prevent a
deadlock easily. They are explicitly called later when the crash dump
is not generated, see console_flush_on_panic().
Signed-off-by: Petr Mladek <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Daniel Thompson <[email protected]>
Cc: David Miller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Russell King <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
printk() takes some locks and could not be used a safe way in NMI
context.
The chance of a deadlock is real especially when printing stacks from
all CPUs. This particular problem has been addressed on x86 by the
commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").
The patchset brings two big advantages. First, it makes the NMI
backtraces safe on all architectures for free. Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited. We still should keep the number of messages in NMI context at
minimum).
Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers. These are not easy to avoid.
This patch reuses most of the code and makes it generic. It is useful
for all messages and architectures that support NMI.
The alternative printk_func is set when entering and is reseted when
leaving NMI context. It queues IRQ work to copy the messages into the
main ring buffer in a safe context.
__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers. There is also used a spinlock to get synchronized with other
flushers.
We do not longer use seq_buf because it depends on external lock. It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.
The code is put into separate printk/nmi.c as suggested by Steven
Rostedt. It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter(). This is achieved by the new
HAVE_NMI Kconfig flag.
The are MN10300 and Xtensa architectures. We need to clean up NMI
handling there first. Let's do it separately.
The patch is heavily based on the draft from Peter Zijlstra, see
https://lkml.org/lkml/2015/6/10/327
[[email protected]: printk-nmi: use %zu format string for size_t]
[[email protected]: min_t->min - all types are size_t here]
Signed-off-by: Petr Mladek <[email protected]>
Suggested-by: Peter Zijlstra <[email protected]>
Suggested-by: Steven Rostedt <[email protected]>
Cc: Jan Kara <[email protected]>
Acked-by: Russell King <[email protected]> [arm part]
Cc: Daniel Thompson <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: David Miller <[email protected]>
Cc: Daniel Thompson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In include/linux/syscalls.h, the four functions sys_kill, sys_tgkill,
sys_tkill and sys_rt_sigqueueinfo are declared with "int pid" and "int
tgid".
However, in kernel/signal.c, the corresponding definitions use the more
appropriate "pid_t" (which is a typedef'd int).
This patch changes "int" to "pid_t" in the declarations of sys_kill,
sys_tgkill, sys_tkill and sys_rt_sigqueueinfo in <linux/syscalls.h> in
order to harmonize the function declarations with their respective
definitions.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: René Nyffenegger <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Al Viro <[email protected]>
Cc: "Steven Rostedt (Red Hat)" <[email protected]>
Cc: Zach Brown <[email protected]>
Cc: Milosz Tanski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We need to call exit_thread from copy_process in a fail path. So make it
accept task_struct as a parameter.
[v2]
* s390: exit_thread_runtime_instr doesn't make sense to be called for
non-current tasks.
* arm: fix the comment in vfp_thread_copy
* change 'me' to 'tsk' for task_struct
* now we can change only archs that actually have exit_thread
[[email protected]: coding-style fixes]
Signed-off-by: Jiri Slaby <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chen Liqin <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: David Howells <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Haavard Skinnemoen <[email protected]>
Cc: Hans-Christian Egtvedt <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Jesper Nilsson <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Koichi Yasutake <[email protected]>
Cc: Lennox Wu <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Mikael Starvik <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Russell King <[email protected]>
Cc: Steven Miao <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.
This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.
[[email protected]: fix mips]
Signed-off-by: Jiri Slaby <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chen Liqin <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: David Howells <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Haavard Skinnemoen <[email protected]>
Cc: Hans-Christian Egtvedt <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Jesper Nilsson <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Koichi Yasutake <[email protected]>
Cc: Lennox Wu <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Mikael Starvik <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Russell King <[email protected]>
Cc: Steven Miao <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|