aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2017-02-25treewide: Remove remaining executable attributes from source filesJoe Perches1-0/+0
These are the current source files that should not have executable attributes set. [ Normally this would be sent through Andrew Morton's tree but his quilt tools don't like permission only patches. ] Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds32-183/+1030
Merge more updates from Andrew Morton: - almost all of the rest of MM - misc bits - KASAN updates - procfs - lib/ updates - checkpatch updates * emailed patches from Andrew Morton <[email protected]>: (124 commits) checkpatch: remove false unbalanced braces warning checkpatch: notice unbalanced else braces in a patch checkpatch: add another old address for the FSF checkpatch: update $logFunctions checkpatch: warn on logging continuations checkpatch: warn on embedded function names lib/lz4: remove back-compat wrappers fs/pstore: fs/squashfs: change usage of LZ4 to work with new LZ4 version crypto: change LZ4 modules to work with new LZ4 module version lib/decompress_unlz4: change module to work with new LZ4 module version lib: update LZ4 compressor module lib/test_sort.c: make it explicitly non-modular lib: add CONFIG_TEST_SORT to enable self-test of sort() rbtree: use designated initializers linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisors lib/find_bit.c: micro-optimise find_next_*_bit lib: add module support to atomic64 tests lib: add module support to glob tests lib: add module support to crc32 tests kernel/ksysfs.c: add __ro_after_init to bin_attribute structure ...
2017-02-24Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-0/+2
Pull OpenRISC updates from Stafford Horne: "Highlights include: - optimized memset and memcpy routines, ~20% boot time saving - support for cpu idling - adding support for l.swa and l.lwa atomic operations (in spec from 2014) - use atomics to implement: bitops, cmpxchg, futex - the atomics are in preparation for SMP support" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits) openrisc: head: Init r0 to 0 on start openrisc: Export ioremap symbols used by modules arch/openrisc/lib/memcpy.c: use correct OR1200 option openrisc: head: Remove unused strings openrisc: head: Move init strings to rodata section openrisc: entry: Fix delay slot detection openrisc: entry: Whitespace and comment cleanups scripts/checkstack.pl: Add openrisc support MAINTAINERS: Add the openrisc official repository openrisc: Add .gitignore openrisc: Add optimized memcpy routine openrisc: Add optimized memset openrisc: Initial support for the idle state openrisc: Fix the bitmask for the unit present register openrisc: remove unnecessary stddef.h include openrisc: add futex_atomic_* implementations openrisc: add optimized atomic operations openrisc: add cmpxchg and xchg implementations openrisc: add atomic bitops openrisc: add l.lwa/l.swa emulation ...
2017-02-24lib/lz4: remove back-compat wrappersSven Schmidt1-69/+0
Remove the functions introduced as wrappers for providing backwards compatibility to the prior LZ4 version. They're not needed anymore since there's no callers left. Link: http://lkml.kernel.org/r/1486321748-19085-6-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <[email protected]> Cc: Bongkyu Kim <[email protected]> Cc: Rui Salvaterra <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Herbert Xu <[email protected]> Cc: David S. Miller <[email protected]> Cc: Anton Vorontsov <[email protected]> Cc: Colin Cross <[email protected]> Cc: Kees Cook <[email protected]> Cc: Tony Luck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24lib: update LZ4 compressor moduleSven Schmidt1-66/+696
Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [[email protected]: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: simplify] [[email protected]: fix the simplification] [[email protected]: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [[email protected]: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Cc: Bongkyu Kim <[email protected]> Cc: Rui Salvaterra <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Herbert Xu <[email protected]> Cc: David S. Miller <[email protected]> Cc: Anton Vorontsov <[email protected]> Cc: Colin Cross <[email protected]> Cc: Kees Cook <[email protected]> Cc: Tony Luck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24rbtree: use designated initializersKees Cook1-1/+3
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Link: http://lkml.kernel.org/r/20161217010253.GA140470@beast Signed-off-by: Kees Cook <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: David Howells <[email protected]> Cc: Jie Chen <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisorsNiklas Söderlund1-4/+6
While working on a thermal driver I encounter a scenario where the divisor could be negative, instead of adding local code to handle this I though I first try to add support for this in DIV_ROUND_CLOSEST. Add support to DIV_ROUND_CLOSEST for negative divisors if both dividend and divisor variable types are signed. This should not alter current behavior for users of the macro as previously negative divisors where not supported. Before: DIV_ROUND_CLOSEST( 59, 4) = 15 DIV_ROUND_CLOSEST( 59, -4) = -14 DIV_ROUND_CLOSEST( -59, 4) = -15 DIV_ROUND_CLOSEST( -59, -4) = 14 After: DIV_ROUND_CLOSEST( 59, 4) = 15 DIV_ROUND_CLOSEST( 59, -4) = -15 DIV_ROUND_CLOSEST( -59, 4) = -15 DIV_ROUND_CLOSEST( -59, -4) = 15 [[email protected]: fix comment, per Guenter] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Niklas Söderlund <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24bug: switch data corruption check to __must_checkKees Cook1-5/+7
The CHECK_DATA_CORRUPTION() macro was designed to have callers do something meaningful/protective on failure. However, using "return false" in the macro too strictly limits the design patterns of callers. Instead, let callers handle the logic test directly, but make sure that the result IS checked by forcing __must_check (which appears to not be able to be used directly on macro expressions). Link: http://lkml.kernel.org/r/20170206204547.GA125312@beast Signed-off-by: Kees Cook <[email protected]> Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24compiler-gcc.h: add a new macro to wrap gcc attributeGideon Israel Dsouza1-0/+1
Add __mode(x) into compiler-gcc.h as part of a cleanup task I've taken up, to replace gcc specific attributes with macros. The next patch is a cleanup of the m68k subsystem and it requires a new macro to wrap __attribute__ ((mode (...))) Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Gideon Israel Dsouza <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Paul Gortmaker <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24include/linux/iopoll.h: include <linux/ktime.h> instead of <linux/hrtimer.h>Masahiro Yamada1-1/+1
The timer APIs this header needs are ktime_get(), ktime_add_us(), and ktime_compare(). So, including <linux/ktime.h> seems enough. This commit will cut unnecessary header file parsing. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24uapi: mqueue.h: add missing linux/types.h includeMike Frysinger1-0/+2
Commit 63159f5dcccb ("uapi: Use __kernel_long_t in struct mq_attr") changed the types from long to __kernel_long_t, but didn't add a linux/types.h include. Code that tries to include this header directly breaks: /usr/include/linux/mqueue.h:26:2: error: unknown type name '__kernel_long_t' __kernel_long_t mq_flags; /* message queue flags */ This also upsets configure tests for this header: checking linux/mqueue.h usability... no checking linux/mqueue.h presence... yes configure: WARNING: linux/mqueue.h: present but cannot be compiled configure: WARNING: linux/mqueue.h: check for missing prerequisite headers? configure: WARNING: linux/mqueue.h: see the Autoconf documentation configure: WARNING: linux/mqueue.h: section "Present But Cannot Be Compiled" configure: WARNING: linux/mqueue.h: proceeding with the compiler's result checking for linux/mqueue.h... no Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24procfs: use an enum for possible hidepid valuesLafcadio Wluiki1-0/+6
Previously, the hidepid parameter was checked by comparing literal integers 0, 1, 2. Let's add a proper enum for this, to make the checking more expressive: 0 → HIDEPID_OFF 1 → HIDEPID_NO_ACCESS 2 → HIDEPID_INVISIBLE This changes the internal labelling only, the userspace-facing interface remains unmodified, and still works with literal integers 0, 1, 2. No functional changes. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Lafcadio Wluiki <[email protected]> Signed-off-by: Djalal Harouni <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24kasan: drain quarantine of memcg slab objectsGreg Thelen1-2/+2
Per memcg slab accounting and kasan have a problem with kmem_cache destruction. - kmem_cache_create() allocates a kmem_cache, which is used for allocations from processes running in root (top) memcg. - Processes running in non root memcg and allocating with either __GFP_ACCOUNT or from a SLAB_ACCOUNT cache use a per memcg kmem_cache. - Kasan catches use-after-free by having kfree() and kmem_cache_free() defer freeing of objects. Objects are placed in a quarantine. - kmem_cache_destroy() destroys root and non root kmem_caches. It takes care to drain the quarantine of objects from the root memcg's kmem_cache, but ignores objects associated with non root memcg. This causes leaks because quarantined per memcg objects refer to per memcg kmem cache being destroyed. To see the problem: 1) create a slab cache with kmem_cache_create(,,,SLAB_ACCOUNT,) 2) from non root memcg, allocate and free a few objects from cache 3) dispose of the cache with kmem_cache_destroy() kmem_cache_destroy() will trigger a "Slab cache still has objects" warning indicating that the per memcg kmem_cache structure was leaked. Fix the leak by draining kasan quarantined objects allocated from non root memcg. Racing memcg deletion is tricky, but handled. kmem_cache_destroy() => shutdown_memcg_caches() => __shutdown_memcg_cache() => shutdown_cache() flushes per memcg quarantined objects, even if that memcg has been rmdir'd and gone through memcg_deactivate_kmem_caches(). This leak only affects destroyed SLAB_ACCOUNT kmem caches when kasan is enabled. So I don't think it's worth patching stable kernels. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Thelen <[email protected]> Reviewed-by: Vladimir Davydov <[email protected]> Acked-by: Andrey Ryabinin <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: David Rientjes <[email protected]> Cc: Joonsoo Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24memory-hotplug: use dev_online for memhp_auto_onlineNathan Fontenot1-3/+0
Commit 31bc3858ea3e ("add automatic onlining policy for the newly added memory") provides the capability to have added memory automatically onlined during add, but this appears to be slightly broken. The current implementation uses walk_memory_range() to call online_memory_block, which uses memory_block_change_state() to online the memory. Instead, we should be calling device_online() for the memory block in online_memory_block(). This would online the memory (the memory bus online routine memory_subsys_online() called from device_online calls memory_block_change_state()) and properly update the device struct offline flag. As a result of the current implementation, attempting to remove a memory block after adding it using auto online fails. This is because doing a remove, for instance echo offline > /sys/devices/system/memory/memoryXXX/state uses device_offline() which checks the dev->offline flag. Link: http://lkml.kernel.org/r/20170222220744.8119.19687.stgit@ltcalpine2-lp14.aus.stglabs.ibm.com Signed-off-by: Nathan Fontenot <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michael Roth <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: remove shmem_mapping() shmem_zero_setup() duplicatesHugh Dickins2-10/+7
Remove the prototypes for shmem_mapping() and shmem_zero_setup() from linux/mm.h, since they are already provided in linux/shmem_fs.h. But shmem_fs.h must then provide the inline stub for shmem_mapping() when CONFIG_SHMEM is not set, and a few more cfiles now need to #include it. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Hugh Dickins <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Michal Simek <[email protected]> Cc: Michael Ellerman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm/ksm: handle protnone saved writes when making page write protectAneesh Kumar K.V1-0/+8
Without this KSM will consider the page write protected, but a numa fault can later mark the page writable. This can result in memory corruption. Link: http://lkml.kernel.org/r/1487498625-10891-3-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm/autonuma: let architecture override how the write bit should be stashed ↵Aneesh Kumar K.V1-0/+16
in a protnone pte. Patch series "Numabalancing preserve write fix", v2. This patch series address an issue w.r.t THP migration and autonuma preserve write feature. migrate_misplaced_transhuge_page() cannot deal with concurrent modification of the page. It does a page copy without following the migration pte sequence. IIUC, this was done to keep the migration simpler and at the time of implemenation we didn't had THP page cache which would have required a more elaborate migration scheme. That means thp autonuma migration expect the protnone with saved write to be done such that both kernel and user cannot update the page content. This patch series enables archs like ppc64 to do that. We are good with the hash translation mode with the current code, because we never create a hardware page table entry for a protnone pte. This patch (of 2): Autonuma preserves the write permission across numa fault to avoid taking a writefault after a numa fault (Commit: b191f9b106ea " mm: numa: preserve PTE write permissions across a NUMA hinting fault"). Architecture can implement protnone in different ways and some may choose to implement that by clearing Read/ Write/Exec bit of pte. Setting the write bit on such pte can result in wrong behaviour. Fix this up by allowing arch to override how to save the write bit on a protnone pte. [[email protected]: don't mark pte saved write in case of dirty_accountable] Link: http://lkml.kernel.org/r/1487942884-16517-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com [[email protected]: v3] Link: http://lkml.kernel.org/r/1487498625-10891-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Aneesh Kumar K.V <[email protected]> Acked-by: Michael Neuling <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Michael Ellerman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm, madvise: fail with ENOMEM when splitting vma will hit max_map_countDavid Rientjes1-2/+4
If madvise(2) advice will result in the underlying vma being split and the number of areas mapped by the process will exceed /proc/sys/vm/max_map_count as a result, return ENOMEM instead of EAGAIN. EAGAIN is returned by madvise(2) when a kernel resource, such as slab, is temporarily unavailable. It indicates that userspace should retry the advice in the near future. This is important for advice such as MADV_DONTNEED which is often used by malloc implementations to free memory back to the system: we really do want to free memory back when madvise(2) returns EAGAIN because slab allocations (for vmas, anon_vmas, or mempolicies) cannot be allocated. Encountering /proc/sys/vm/max_map_count is not a temporary failure, however, so return ENOMEM to indicate this is a more serious issue. A followup patch to the man page will specify this behavior. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: David Rientjes <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Jerome Marchand <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: Michael Kerrisk <[email protected]> Cc: Anshuman Khandual <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: wire up GFP flag passing in dma_alloc_from_contiguousLucas Stach1-2/+2
The callers of the DMA alloc functions already provide the proper context GFP flags. Make sure to pass them through to the CMA allocator, to make the CMA compaction context aware. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Lucas Stach <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Radim Krcmar <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Alexander Graf <[email protected]> Cc: Joonsoo Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: cma_alloc: allow to specify GFP maskLucas Stach1-1/+2
Most users of this interface just want to use it with the default GFP_KERNEL flags, but for cases where DMA memory is allocated it may be called from a different context. No functional change yet, just passing through the flag to the underlying alloc_contig_range function. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Lucas Stach <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Radim Krcmar <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Alexander Graf <[email protected]> Cc: Joonsoo Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: alloc_contig_range: allow to specify GFP maskLucas Stach1-1/+1
Currently alloc_contig_range assumes that the compaction should be done with the default GFP_KERNEL flags. This is probably right for all current uses of this interface, but may change as CMA is used in more use-cases (including being the default DMA memory allocator on some platforms). Change the function prototype, to allow for passing through the GFP mask set by upper layers. Also respect global restrictions by applying memalloc_noio_flags to the passed in flags. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Lucas Stach <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Cc: Radim Krcmar <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Alexander Graf <[email protected]> Cc: Joonsoo Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24userfaultfd: non-cooperative: add event for exit() notificationMike Rapoport2-1/+11
Allow userfaultfd monitor track termination of the processes that have memory backed by the uffd. [[email protected]: add comment] Link: http://lkml.kernel.org/r/20170202135448.GB19804@rapoport-lnxLink: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Acked-by: Hillf Danton <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: "Dr. David Alan Gilbert" <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Pavel Emelyanov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24userfaultfd: non-cooperative: add event for memory unmapsMike Rapoport3-5/+30
When a non-cooperative userfaultfd monitor copies pages in the background, it may encounter regions that were already unmapped. Addition of UFFD_EVENT_UNMAP allows the uffd monitor to track precisely changes in the virtual memory layout. Since there might be different uffd contexts for the affected VMAs, we first should create a temporary representation for the unmap event for each uffd context and then notify them one by one to the appropriate userfault file descriptors. The event notification occurs after the mmap_sem has been released. [[email protected]: fix nommu build] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: fix nommu build] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Michal Hocko <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Hillf Danton <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: "Dr. David Alan Gilbert" <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Pavel Emelyanov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: drop page_check_address{,_transhuge}Kirill A. Shutemov1-36/+0
All users are gone. Let's drop them. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Kirill A. Shutemov <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Hillf Danton <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: Vladimir Davydov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: introduce page_vma_mapped_walk()Kirill A. Shutemov1-0/+26
Introduce a new interface to check if a page is mapped into a vma. It aims to address shortcomings of page_check_address{,_transhuge}. Existing interface is not able to handle PTE-mapped THPs: it only finds the first PTE. The rest lefted unnoticed. page_vma_mapped_walk() iterates over all possible mapping of the page in the vma. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Kirill A. Shutemov <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Hillf Danton <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: Vladimir Davydov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm/migration: make isolate_movable_page always definedYisheng Xie1-0/+2
Define isolate_movable_page as a static inline function when CONFIG_MIGRATION is not enable. It should return -EBUSY here which means failed to isolate movable pages. This patch do not have any functional change but prepare for later patch. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Yisheng Xie <[email protected]> Acked-by: Minchan Kim <[email protected]> Suggested-by: Michal Hocko <[email protected]> Cc: Naoya Horiguchi <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Reza Arbab <[email protected]> Cc: Taku Izumi <[email protected]> Cc: Vitaly Kuznetsov <[email protected]> Cc: Xishi Qiu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm/migration: make isolate_movable_page() return int typeYisheng Xie1-1/+1
Patch series "HWPOISON: soft offlining for non-lru movable page", v6. After Minchan's commit bda807d44454 ("mm: migrate: support non-lru movable page migration"), some type of non-lru page like zsmalloc and virtio-balloon page also support migration. Therefore, we can: 1) soft offlining no-lru movable pages, which means when memory corrected errors occur on a non-lru movable page, we can stop to use it by migrating data onto another page and disable the original (maybe half-broken) one. 2) enable memory hotplug for non-lru movable pages, i.e. we may offline blocks, which include such pages, by using non-lru page migration. This patchset is heavily dependent on non-lru movable page migration. This patch (of 4): Change the return type of isolate_movable_page() from bool to int. It will return 0 when isolate movable page successfully, and return -EBUSY when it isolates failed. There is no functional change within this patch but prepare for later patch. [[email protected]: v6] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Yisheng Xie <[email protected]> Suggested-by: Michal Hocko <[email protected]> Acked-by: Minchan Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Naoya Horiguchi <[email protected]> Cc: Reza Arbab <[email protected]> Cc: Taku Izumi <[email protected]> Cc: Vitaly Kuznetsov <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Xishi Qiu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: replace FAULT_FLAG_SIZE with parameter to huge_faultDave Jiang2-7/+10
Since the introduction of FAULT_FLAG_SIZE to the vm_fault flag, it has been somewhat painful with getting the flags set and removed at the correct locations. More than one kernel oops was introduced due to difficulties of getting the placement correctly. Remove the flag values and introduce an input parameter to huge_fault that indicates the size of the page entry. This makes the code easier to trace and should avoid the issues we see with the fault flags where removal of the flag was necessary in the fallback paths. Link: http://lkml.kernel.org/r/148615748258.43180.1690152053774975329.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <[email protected]> Tested-by: Dan Williams <[email protected]> Reviewed-by: Jan Kara <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Ross Zwisler <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Nilesh Choudhury <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm, x86: add support for PUD-sized transparent hugepagesMatthew Wilcox6-10/+223
The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [[email protected]: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [[email protected]: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Tested-by: Alexander Kapshuk <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Jan Kara <[email protected]> Cc: Dan Williams <[email protected]> Cc: Ross Zwisler <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Nilesh Choudhury <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm,fs,dax: change ->pmd_fault to ->huge_faultDave Jiang2-7/+9
Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [[email protected]: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Ross Zwisler <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Jan Kara <[email protected]> Cc: Dan Williams <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Nilesh Choudhury <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Dave Jiang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang3-10/+8
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [[email protected]: fix ARM build] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Ross Zwisler <[email protected]> Cc: Theodore Ts'o <[email protected]> Cc: Darrick J. Wong <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Jan Kara <[email protected]> Cc: Dan Williams <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: vmscan: move dirty pages out of the way until they're flushedJohannes Weiner1-0/+7
We noticed a performance regression when moving hadoop workloads from 3.10 kernels to 4.0 and 4.6. This is accompanied by increased pageout activity initiated by kswapd as well as frequent bursts of allocation stalls and direct reclaim scans. Even lowering the dirty ratios to the equivalent of less than 1% of memory would not eliminate the issue, suggesting that dirty pages concentrate where the scanner is looking. This can be traced back to recent efforts of thrash avoidance. Where 3.10 would not detect refaulting pages and continuously supply clean cache to the inactive list, a thrashing workload on 4.0+ will detect and activate refaulting pages right away, distilling used-once pages on the inactive list much more effectively. This is by design, and it makes sense for clean cache. But for the most part our workload's cache faults are refaults and its use-once cache is from streaming writes. We end up with most of the inactive list dirty, and we don't go after the active cache as long as we have use-once pages around. But waiting for writes to avoid reclaiming clean cache that *might* refault is a bad trade-off. Even if the refaults happen, reads are faster than writes. Before getting bogged down on writeback, reclaim should first look at *all* cache in the system, even active cache. To accomplish this, activate pages that are dirty or under writeback when they reach the end of the inactive LRU. The pages are marked for immediate reclaim, meaning they'll get moved back to the inactive LRU tail as soon as they're written back and become reclaimable. But in the meantime, by reducing the inactive list to only immediately reclaimable pages, we allow the scanner to deactivate and refill the inactive list with clean cache from the active list tail to guarantee forward progress. [[email protected]: update comment] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Johannes Weiner <[email protected]> Acked-by: Minchan Kim <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Hillf Danton <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Rik van Riel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: vmscan: kick flushers when we encounter dirty pages on the LRUJohannes Weiner2-2/+2
Memory pressure can put dirty pages at the end of the LRU without anybody running into dirty limits. Don't start writing individual pages from kswapd while the flushers might be asleep. Unlike the old direct reclaim flusher wakeup (removed in the next patch) that flushes the number of pages just scanned, this patch wakes the flushers for all outstanding dirty pages. That seemed to perform better in a synthetic test that pushes dirty pages to the end of the LRU and into reclaim, because we know LRU aging outstrips writeback already, and this way we give younger dirty pages a headstart rather than wait until reclaim runs into them as well. It also means less plugging and risk of exhausting the struct request pool from reclaim. There is a concern that this will cause temporary files that used to get dirtied and truncated before writeback to now get written to disk under memory pressure. If this turns out to be a real problem, we'll have to revisit this and tame the reclaim flusher wakeups. [[email protected]: mention dirty expiration as a condition] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Johannes Weiner <[email protected]> Acked-by: Minchan Kim <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Mel Gorman <[email protected]> Acked-by: Hillf Danton <[email protected]> Cc: Rik van Riel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: vmscan: scan dirty pages even in laptop modeJohannes Weiner1-2/+0
Patch series "mm: vmscan: fix kswapd writeback regression". We noticed a regression on multiple hadoop workloads when moving from 3.10 to 4.0 and 4.6, which involves kswapd getting tangled up in page writeout, causing direct reclaim herds that also don't make progress. I tracked it down to the thrash avoidance efforts after 3.10 that make the kernel better at keeping use-once cache and use-many cache sorted on the inactive and active list, with more aggressive protection of the active list as long as there is inactive cache. Unfortunately, our workload's use-once cache is mostly from streaming writes. Waiting for writes to avoid potential reloads in the future is not a good tradeoff. These patches do the following: 1. Wake the flushers when kswapd sees a lump of dirty pages. It's possible to be below the dirty background limit and still have cache velocity push them through the LRU. So start a-flushin'. 2. Let kswapd only write pages that have been rotated twice. This makes sure we really tried to get all the clean pages on the inactive list before resorting to horrible LRU-order writeback. 3. Move rotating dirty pages off the inactive list. Instead of churning or waiting on page writeback, we'll go after clean active cache. This might lead to thrashing, but in this state memory demand outstrips IO speed anyway, and reads are faster than writes. Mel backported the series to 4.10-rc5 with one minor conflict and ran a couple of tests on it. Mix of read/write random workload didn't show anything interesting. Write-only database didn't show much difference in performance but there were slight reductions in IO -- probably in the noise. simoop did show big differences although not as big as Mel expected. This is Chris Mason's workload that similate the VM activity of hadoop. Mel won't go through the full details but over the samples measured during an hour it reported 4.10.0-rc5 4.10.0-rc5 vanilla johannes-v1r1 Amean p50-Read 21346531.56 ( 0.00%) 21697513.24 ( -1.64%) Amean p95-Read 24700518.40 ( 0.00%) 25743268.98 ( -4.22%) Amean p99-Read 27959842.13 ( 0.00%) 28963271.11 ( -3.59%) Amean p50-Write 1138.04 ( 0.00%) 989.82 ( 13.02%) Amean p95-Write 1106643.48 ( 0.00%) 12104.00 ( 98.91%) Amean p99-Write 1569213.22 ( 0.00%) 36343.38 ( 97.68%) Amean p50-Allocation 85159.82 ( 0.00%) 79120.70 ( 7.09%) Amean p95-Allocation 204222.58 ( 0.00%) 129018.43 ( 36.82%) Amean p99-Allocation 278070.04 ( 0.00%) 183354.43 ( 34.06%) Amean final-p50-Read 21266432.00 ( 0.00%) 21921792.00 ( -3.08%) Amean final-p95-Read 24870912.00 ( 0.00%) 26116096.00 ( -5.01%) Amean final-p99-Read 28147712.00 ( 0.00%) 29523968.00 ( -4.89%) Amean final-p50-Write 1130.00 ( 0.00%) 977.00 ( 13.54%) Amean final-p95-Write 1033216.00 ( 0.00%) 2980.00 ( 99.71%) Amean final-p99-Write 1517568.00 ( 0.00%) 32672.00 ( 97.85%) Amean final-p50-Allocation 86656.00 ( 0.00%) 78464.00 ( 9.45%) Amean final-p95-Allocation 211712.00 ( 0.00%) 116608.00 ( 44.92%) Amean final-p99-Allocation 287232.00 ( 0.00%) 168704.00 ( 41.27%) The latencies are actually completely horrific in comparison to 4.4 (and 4.10-rc5 is worse than 4.9 according to historical data for reasons Mel hasn't analysed yet). Still, 95% of write latency (p95-write) is halved by the series and allocation latency is way down. Direct reclaim activity is one fifth of what it was according to vmstats. Kswapd activity is higher but this is not necessarily surprising. Kswapd efficiency is unchanged at 99% (99% of pages scanned were reclaimed) but direct reclaim efficiency went from 77% to 99% In the vanilla kernel, 627MB of data was written back from reclaim context. With the series, no data was written back. With or without the patch, pages are being immediately reclaimed after writeback completes. However, with the patch, only 1/8th of the pages are reclaimed like this. This patch (of 5): We have an elaborate dirty/writeback throttling mechanism inside the reclaim scanner, but for that to work the pages have to go through shrink_page_list() and get counted for what they are. Otherwise, we mess up the LRU order and don't match reclaim speed to writeback. Especially during deactivation, there is never a reason to skip dirty pages; nothing is even trying to write them out from there. Don't mess up the LRU order for nothing, shuffle these pages along. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Johannes Weiner <[email protected]> Acked-by: Minchan Kim <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Mel Gorman <[email protected]> Acked-by: Hillf Danton <[email protected]> Cc: Rik van Riel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24userfaultfd: non-cooperative: rename *EVENT_MADVDONTNEED to *EVENT_REMOVEMike Rapoport2-12/+12
Patch series "userfaultfd: non-cooperative: add madvise() event for MADV_REMOVE request". These patches add notification of madvise(MADV_REMOVE) event to non-cooperative userfaultfd monitor. The first pacth renames EVENT_MADVDONTNEED to EVENT_REMOVE along with relevant functions and structures. Using _REMOVE instead of _MADVDONTNEED describes the event semantics more clearly and I hope it's not too late for such change in the ABI. This patch (of 3): The UFFD_EVENT_MADVDONTNEED purpose is to notify uffd monitor about removal of certain range from address space tracked by userfaultfd. Hence, UFFD_EVENT_REMOVE seems to better reflect the operation semantics. Respectively, 'madv_dn' field of uffd_msg is renamed to 'remove' and the madvise_userfault_dontneed callback is renamed to userfaultfd_remove. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Reviewed-by: Andrea Arcangeli <[email protected]> Acked-by: Hillf Danton <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24memblock: embed memblock type name within struct memblock_typeHeiko Carstens1-0/+1
Provide the name of each memblock type with struct memblock_type. This allows to get rid of the function memblock_type_name() and duplicating the type names in __memblock_dump_all(). The only memblock_type usage out of mm/memblock.c seems to be arch/s390/kernel/crash_dump.c. While at it, give it a name. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]> Cc: Philipp Hachtmann <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24mm: validate device_hotplug is held for memory hotplugDan Williams1-0/+1
mem_hotplug_begin() assumes that it can set mem_hotplug.active_writer and run the hotplug process without racing another thread. Validate this assumption with a lockdep assertion. Link: http://lkml.kernel.org/r/148693886229.16345.1770484669403334689.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <[email protected]> Reported-by: Ben Hutchings <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Toshi Kani <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Masayoshi Mizuma <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-24Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-2/+9
Pull md updates from Shaohua Li: "Mainly fixes bugs and improves performance: - Improve scalability for raid1 from Coly - Improve raid5-cache read performance, disk efficiency and IO pattern from Song and me - Fix a race condition of disk hotplug for linear from Coly - A few cleanup patches from Ming and Byungchul - Fix a memory leak from Neil - Fix WRITE SAME IO failure from me - Add doc for raid5-cache from me" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (23 commits) md/raid1: fix write behind issues introduced by bio_clone_bioset_partial md/raid1: handle flush request correctly md/linear: shutup lockdep warnning md/raid1: fix a use-after-free bug RAID1: avoid unnecessary spin locks in I/O barrier code RAID1: a new I/O barrier implementation to remove resync window md/raid5: Don't reinvent the wheel but use existing llist API md: fast clone bio in bio_clone_mddev() md: remove unnecessary check on mddev md/raid1: use bio_clone_bioset_partial() in case of write behind md: fail if mddev->bio_set can't be created block: introduce bio_clone_bioset_partial() md: disable WRITE SAME if it fails in underlayer disks md/raid5-cache: exclude reclaiming stripes in reclaim check md/raid5-cache: stripe reclaim only counts valid stripes MD: add doc for raid5-cache Documentation: move MD related doc into a separate dir md: ensure md devices are freed before module is unloaded. md/r5cache: improve journal device efficiency md/r5cache: enable chunk_aligned_read with write back cache ...
2017-02-24Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds4-1/+40
Pull block updates and fixes from Jens Axboe: - NVMe updates and fixes that missed the first pull request. This includes bug fixes, and support for autonomous power management. - Fix from Christoph for missing clear of the request payload, causing a problem with (at least) the storvsc driver. - Further fixes for the queue/bdi life time issues from Jan. - The Kconfig mq scheduler update from me. - Fixing a use-after-free in dm-rq, spotted by Bart, introduced in this merge window. - Three fixes for nbd from Josef. - Bug fix from Omar, fixing a bug in sas transport code that oopses when bsg ioctls were used. From Omar. - Improvements to the queue restart and tag wait from from Omar. - Set of fixes for the sed/opal code from Scott. - Three trivial patches to cciss from Tobin * 'for-linus' of git://git.kernel.dk/linux-block: (41 commits) dm-rq: don't dereference request payload after ending request blk-mq-sched: separate mark hctx and queue restart operations blk-mq: use sbq wait queues instead of restart for driver tags block/sed-opal: Propagate original error message to userland. nvme/pci: re-check security protocol support after reset block/sed-opal: Introduce free_opal_dev to free the structure and clean up state nvme: detect NVMe controller in recent MacBooks nvme-rdma: add support for host_traddr nvmet-rdma: Fix error handling nvmet-rdma: use nvme cm status helper nvme-rdma: move nvme cm status helper to .h file nvme-fc: don't bother to validate ioccsz and iorcsz nvme/pci: No special case for queue busy on IO nvme/core: Fix race kicking freed request_queue nvme/pci: Disable on removal when disconnected nvme: Enable autonomous power state transitions nvme: Add a quirk mechanism that uses identify_ctrl nvme: make nvmf_register_transport require a create_ctrl callback nvme: Use CNS as 8-bit field and avoid endianness conversion nvme: add semicolon in nvme_command setting ...
2017-02-25openrisc: add optimized atomic operationsStefan Kristiansson1-0/+2
Using the l.lwa and l.swa atomic instruction pair. Most openrisc processor cores provide these instructions now. If the instructions are not available emulation is provided. Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Stefan Kristiansson <[email protected]> [[email protected]: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666] [[email protected]: expand to implement all ops suggested by Peter Zijlstra https://lkml.org/lkml/2017/2/20/317] Signed-off-by: Stafford Horne <[email protected]>
2017-02-23Merge branch 'for-linus' of ↵Linus Torvalds9-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace updates from Eric Biederman: "There is a lot here. A lot of these changes result in subtle user visible differences in kernel behavior. I don't expect anything will care but I will revert/fix things immediately if any regressions show up. From Seth Forshee there is a continuation of the work to make the vfs ready for unpriviled mounts. We had thought the previous changes prevented the creation of files outside of s_user_ns of a filesystem, but it turns we missed the O_CREAT path. Ooops. Pavel Tikhomirov and Oleg Nesterov worked together to fix a long standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only children that are forked after the prctl are considered and not children forked before the prctl. The only known user of this prctl systemd forks all children after the prctl. So no userspace regressions will occur. Holding earlier forked children to the same rules as later forked children creates a semantic that is sane enough to allow checkpoing of processes that use this feature. There is a long delayed change by Nikolay Borisov to limit inotify instances inside a user namespace. Michael Kerrisk extends the API for files used to maniuplate namespaces with two new trivial ioctls to allow discovery of the hierachy and properties of namespaces. Konstantin Khlebnikov with the help of Al Viro adds code that when a network namespace exits purges it's sysctl entries from the dcache. As in some circumstances this could use a lot of memory. Vivek Goyal fixed a bug with stacked filesystems where the permissions on the wrong inode were being checked. I continue previous work on ptracing across exec. Allowing a file to be setuid across exec while being ptraced if the tracer has enough credentials in the user namespace, and if the process has CAP_SETUID in it's own namespace. Proc files for setuid or otherwise undumpable executables are now owned by the root in the user namespace of their mm. Allowing debugging of setuid applications in containers to work better. A bug I introduced with permission checking and automount is now fixed. The big change is to mark the mounts that the kernel initiates as a result of an automount. This allows the permission checks in sget to be safely suppressed for this kind of mount. As the permission check happened when the original filesystem was mounted. Finally a special case in the mount namespace is removed preventing unbounded chains in the mount hash table, and making the semantics simpler which benefits CRIU. The vfs fix along with related work in ima and evm I believe makes us ready to finish developing and merge fully unprivileged mounts of the fuse filesystem. The cleanups of the mount namespace makes discussing how to fix the worst case complexity of umount. The stacked filesystem fixes pave the way for adding multiple mappings for the filesystem uids so that efficient and safer containers can be implemented" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc/sysctl: Don't grab i_lock under sysctl_lock. vfs: Use upper filesystem inode in bprm_fill_uid() proc/sysctl: prune stale dentries during unregistering mnt: Tuck mounts under others instead of creating shadow/side mounts. prctl: propagate has_child_subreaper flag to every descendant introduce the walk_process_tree() helper nsfs: Add an ioctl() to return owner UID of a userns fs: Better permission checking for submounts exit: fix the setns() && PR_SET_CHILD_SUBREAPER interaction vfs: open() with O_CREAT should not create inodes with unknown ids nsfs: Add an ioctl() to return the namespace type proc: Better ownership of files for non-dumpable tasks in user namespaces exec: Remove LSM_UNSAFE_PTRACE_CAP exec: Test the ptracer's saved cred to see if the tracee can gain caps exec: Don't reset euid and egid when the tracee has CAP_SETUID inotify: Convert to using per-namespace limits
2017-02-23Merge tag 'drm-for-v4.11-less-shouty' of ↵Linus Torvalds55-587/+1841
git://people.freedesktop.org/~airlied/linux Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.11. Nothing too major, the tinydrm and mmu-less support should make writing smaller drivers easier for some of the simpler platforms, and there are a bunch of documentation updates. Intel grew displayport MST audio support which is hopefully useful to people, and FBC is on by default for GEN9+ (so people know where to look for regressions). AMDGPU has a lot of fixes that would like new firmware files installed for some GPUs. Other than that it's pretty scattered all over. I may have a follow up pull request as I know BenH has a bunch of AST rework and fixes and I'd like to get those in once they've been tested by AST, and I've got at least one pull request I'm just trying to get the author to fix up. Core: - drm_mm reworked - Connector list locking and iterators - Documentation updates - Format handling rework - MMU-less support for fbdev helpers - drm_crtc_from_index helper - Core CRC API - Remove drm_framebuffer_unregister_private - Debugfs cleanup - EDID/Infoframe fixes - Release callback - Tinydrm support (smaller drivers for simple hw) panel: - Add support for some new simple panels i915: - FBC by default for gen9+ - Shared dpll cleanups and docs - GEN8 powerdomain cleanup - DMC support on GLK - DP MST audio support - HuC loading support - GVT init ordering fixes - GVT IOMMU workaround fix amdgpu/radeon: - Power/clockgating improvements - Preliminary SR-IOV support - TTM buffer priority and eviction fixes - SI DPM quirks removed due to firmware fixes - Powerplay improvements - VCE/UVD powergating fixes - Cleanup SI GFX code to match CI/VI - Support for > 2 displays on 3/5 crtc asics - SI headless fixes nouveau: - Rework securre boot code in prep for GP10x secure boot - Channel recovery improvements - Initial power budget code - MMU rework preperation vmwgfx: - Bunch of fixes and cleanups exynos: - Runtime PM support for MIC driver - Cleanups to use atomic helpers - UHD Support for TM2/TM2E boards - Trigger mode fix for Rinato board etnaviv: - Shader performance fix - Command stream validator fixes - Command buffer suballocator rockchip: - CDN DisplayPort support - IOMMU support for arm64 platform imx-drm: - Fix i.MX5 TV encoder probing - Remove lower fb size limits msm: - Support for HW cursor on MDP5 devices - DSI encoder cleanup - GPU DT bindings cleanup sti: - stih410 cleanups - Create fbdev at binding - HQVDP fixes - Remove stih416 chip functionality - DVI/HDMI mode selection fixes - FPS statistic reporting omapdrm: - IRQ code cleanup dwi-hdmi bridge: - Cleanups and fixes adv-bridge: - Updates for nexus sii8520 bridge: - Add interlace mode support - Rework HDMI and lots of fixes qxl: - probing/teardown cleanups ZTE drm: - HDMI audio via SPDIF interface - Video Layer overlay plane support - Add TV encoder output device atmel-hlcdc: - Rework fbdev creation logic tegra: - OF node fix fsl-dcu: - Minor fixes mali-dp: - Assorted fixes sunxi: - Minor fix" [ This was the "fixed" pull, that still had build warnings due to people not even having build tested the result. I'm not a happy camper I've fixed the things I noticed up in this merge. - Linus ] * tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits) lib/Kconfig: make PRIME_NUMBERS not user selectable drm/tinydrm: helpers: Properly fix backlight dependency drm/tinydrm: mipi-dbi: Fix field width specifier warning drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files drm/amd/powerplay: fix PSI feature on Polars12 drm/amdgpu: refuse to reserve io mem for split VRAM buffers drm/ttm: fix use-after-free races in vm fault handling drm/tinydrm: Add support for Multi-Inno MI0283QT display dt-bindings: Add Multi-Inno MI0283QT binding dt-bindings: display/panel: Add common rotation property of: Add vendor prefix for Multi-Inno drm/tinydrm: Add MIPI DBI support drm/tinydrm: Add helper functions drm: Add DRM support for tiny LCD displays drm/amd/amdgpu: post card if there is real hw resetting performed drm/nouveau/tmr: provide backtrace when a timeout is hit drm/nouveau/pci/g92: Fix rearm drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios drm/nouveau/hwmon: expose power_max and power_crit ..
2017-02-24drm/tinydrm: helpers: Properly fix backlight dependencyNoralf Trønnes1-19/+0
BACKLIGHT_CLASS_DEVICE was selected in the last version of the tinydrm patchset to fix the backlight dependency, but the ifdef CONFIG_BACKLIGHT_CLASS_DEVICE was forgotten. Fix that. Signed-off-by: Noralf Trønnes <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2017-02-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds5-102/+130
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ...
2017-02-23Merge tag 'armsoc-dt64' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "ARM64 DT updates are fairly small this time, only two new SoCs and a handful of new machines get added, all of them similar to other hardware we already support. New SoC: - HiSilicon Kirin960/Hi3660 and HiKey960 development board - NXP LS1012a with three reference boards: http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A New development board: - Banana Pi M64, based on Allwinner A64: http://www.banana-pi.org/m64.html - SolidRun MACCHIATOBin based on Marvell Armada 8K: https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/ - Broadcom BCM958712DxXMC NorthStar2 reference board (another one) A lot of platforms improve support for existing machines by adding extra devices for which a binding and driver is availabe: Allwinner: - MMC, USB ARM Juno: - Coresight, STM Broadcom: - NS2 GICv2m irqchip and PCIe Marvell: - Armada 3700 SPI, I2C, ethernet switch Mediatek: - MT8173 thermal NXP i.MX: - LS1046A thermal Qualcomm: - coresight on MSM8916, HDMI, WCNSS, SCM Renesas: - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd Rockchip: - thermal, eDP, pinctrl enhancements Samsung: - TM2 touchkey, Exynos5433 HDMI and power management improvements UniPhier: - SD reset, eMMC controller ZTE: - oppv2 cpufreq" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits) arm64: dts: qcom: Add msm8916 CoreSight components arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon arm64: allwinner: add BananaPi-M64 support arm64: allwinner: a64: add UART1 pin nodes arm64: allwinner: pine64: add MMC support arm64: allwinner: a64: Increase the MMC max frequency arm64: allwinner: a64: Add MMC pinctrl nodes arm64: allwinner: a64: Add MMC nodes dt-bindings: clockgen: Add compatible string for LS1012A Documentation: DT: add LS1012A compatible for SCFG and DCFG Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci arm64: tegra: Use symbolic reset identifiers arm64: dts: r8a7796: Mark EthernetAVB device node disabled arm64: dts: r8a7795: Mark EthernetAVB device node disabled arm64: dts: r8a7795: tidyup audma definition order arm64: dts: r8a7796: Link ARM GIC to clock and clock domain arm64: dts: r8a7795: Link ARM GIC to clock and clock domain arm64: dts: r8a7796: Add R-Car Gen3 thermal support arm64: dts: r8a7795: Add R-Car Gen3 thermal support ...
2017-02-23Merge tag 'armsoc-dt' of ↵Linus Torvalds3-7/+60
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ...
2017-02-23Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "We sometimes collect non-critical fixes that come in during the later part of the merge window in a branch for the next release instead, and this is that contents for v4.11. Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks and setup. There's also some fixes for Davinci and a Kconfig fix for SCPI to only enable on ARM{,64}" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: firmware: arm_scpi: Add hardware dependencies ARM: OMAP3: Fix SoC detection of OMAP36/37 Family ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART ARM: dts: Fix compatible for ti81xx uarts for 8250 ARM: dts: Fix am335x and dm814x scm syscon to probe children ARM: OMAP2+: Fix init for multiple quirks for the same SoC ARM: dts: Fix omap3 off mode pull defines bus: da850-mstpri: fix my e-mail address ARM: davinci: da850: fix da850_set_pll0rate() ARM: davinci: da850: coding style fix
2017-02-24Merge tag 'drm/panel/for-4.11-rc1' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/tegra/linux into drm-next drm/panel: Changes for v4.11-rc1 This set contains a couple of cleanups as well as support for a few more simple panels. * tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: simple: Specify bus width and flags for EDT displays drm/panel: simple: Add Netron DY E231732 of: Add vendor prefix for Netron DY drm/panel: simple: Add support for Tianma TM070JDHG30 of: Add vendor prefix for Tianma Micro-electronics drm/panel: simple: Add support BOE NV101WXMN51 dt-bindings: display: Add BOE NV101WXMN51 panel binding drm/panel: Constify device node argument to of_drm_find_panel()
2017-02-23Merge tag 'pci-v4.11-changes' of ↵Linus Torvalds4-23/+21
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
2017-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds10-7/+31
Pull networking fixes from David Miller: 1) Some 'const'ing in qlogic networking drivers, from Bhumika Goyal. 2) Fix scheduling while atomic in l2tp network namespace exit by deferring the work to the workqueue. From Ridge Kennedy. 3) Fix use after free in dccp timewait handling, from Andrey Ryabinin. 4) mlx5e CQE compression engine not initialized properly, from Tariq Toukan. 5) Some UAPI header fixes from Dmitry V. Levin. 6) Don't overwrite module parameter value in mlx4 driver, from Majd Dibbiny. 7) Fix divide by zero in xt_hashlimit netfilter module, from Alban Browaeys. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) bpf: Fix bpf_xdp_event_output net/mlx4_en: Use __skb_fill_page_desc() net/mlx4_core: Use cq quota in SRIOV when creating completion EQs net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs net/mlx4: Spoofcheck and zero MAC can't coexist net/mlx4: Change ENOTSUPP to EOPNOTSUPP uapi: fix linux/rds.h userspace compilation errors uapi: fix linux/seg6.h and linux/seg6_iptunnel.h userspace compilation errors lib: Remove string from parman config selection forcedeth: Remove return from a void function bpf: fix spelling mistake: "proccessed" -> "processed" uapi: fix linux/llc.h userspace compilation error uapi: fix linux/ip6_tunnel.h userspace compilation errors net/mlx5e: Fix wrong CQE decompression net/mlx5e: Update MPWQE stride size when modifying CQE compress state net/mlx5e: Fix broken CQE compression initialization net/mlx5e: Do not reduce LRO WQE size when not using build_skb net/mlx5e: Register/unregister vport representors on interface attach/detach net/mlx5e: s390 system compilation fix tcp: account for ts offset only if tsecr not zero ...
Powered by cgit, Gruvboxed by Blaster4385.