| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Function identifiers are a 32bit, unsigned quantity. But we never
tell so to the compiler, resulting in the following:
4ac: b26187e0 mov x0, #0xffffffff80000001
We thus rely on the firmware narrowing it for us, which is not
always a reasonable expectation.
Cc: [email protected]
Reported-by: Ard Biesheuvel <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Since PSCI 1.0 allows the SMCCC version to be (indirectly) probed,
let's do that at boot time, and expose the version of the calling
convention as part of the psci_ops structure.
Acked-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In order to call into the firmware to apply workarounds, it is
useful to find out whether we're using HVC or SMC. Let's expose
this through the psci_ops.
Acked-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
A new feature of SMCCC 1.1 is that it offers firmware-based CPU
workarounds. In particular, SMCCC_ARCH_WORKAROUND_1 provides
BP hardening for CVE-2017-5715.
If the host has some mitigation for this issue, report that
we deal with it using SMCCC_ARCH_WORKAROUND_1, as we apply the
host workaround on every guest exit.
Tested-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Christoffer Dall <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
We're about to need kvm_psci_version in HYP too. So let's turn it
into a static inline, and pass the kvm structure as a second
parameter (so that HYP can do a kern_hyp_va on it).
Tested-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Christoffer Dall <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The new SMC Calling Convention (v1.1) allows for a reduced overhead
when calling into the firmware, and provides a new feature discovery
mechanism.
Make it visible to KVM guests.
Tested-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Christoffer Dall <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
PSCI 1.0 can be trivially implemented by providing the FEATURES
call on top of PSCI 0.2 and returning 1.0 as the PSCI version.
We happily ignore everything else, as they are either optional or
are clarifications that do not require any additional change.
PSCI 1.0 is now the default until we decide to add a userspace
selection API.
Reviewed-by: Christoffer Dall <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
As we're about to trigger a PSCI version explosion, it doesn't
hurt to introduce a PSCI_VERSION helper that is going to be
used everywhere.
Reviewed-by: Christoffer Dall <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
As we're about to update the PSCI support, and because I'm lazy,
let's move the PSCI include file to include/kvm so that both
ARM architectures can find it.
Acked-by: Christoffer Dall <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Move the idr kernel-doc to its own idr.rst file and add a few
paragraphs about how to use it. Also add some more kernel-doc.
Signed-off-by: Matthew Wilcox <[email protected]>
|
|
About 20% of the IDR users in the kernel want the allocated IDs to start
at 1. The implementation currently searches all the way down the left
hand side of the tree, finds no free ID other than ID 0, walks all the
way back up, and then all the way down again. This patch 'rebases' the
ID so we fill the entire radix tree, rather than leave a gap at 0.
Chris Wilson says: "I did the quick hack of allocating index 0 of the
idr and that eradicated idr_get_free() from being at the top of the
profiles for the many-object stress tests. This improvement will be
much appreciated."
Signed-off-by: Matthew Wilcox <[email protected]>
|
|
Most places in the kernel that we need to distinguish functions by the
type of their arguments, we use '_ul' as a suffix for the unsigned long
variant, not '_ext'. Also add kernel-doc.
Signed-off-by: Matthew Wilcox <[email protected]>
|
|
It has no more users, so remove it. Move idr_alloc() back into idr.c,
move the guts of idr_alloc_cmn() into idr_alloc_u32(), remove the
wrappers around idr_get_free_cmn() and rename it to idr_get_free().
While there is now no interface to allocate IDs larger than a u32,
the IDR internals remain ready to handle a larger ID should a need arise.
These changes make it possible to provide the guarantee that, if the
nextid pointer points into the object, the object's ID will be initialised
before a concurrent lookup can find the object.
Signed-off-by: Matthew Wilcox <[email protected]>
|
|
All current users of idr_alloc_ext() actually want to allocate a u32
and idr_alloc_u32() fits their needs better.
Like idr_get_next(), it uses a 'nextid' argument which serves as both
a pointer to the start ID and the assigned ID (instead of a separate
minimum and pointer-to-assigned-ID argument). It uses a 'max' argument
rather than 'end' because the semantics that idr_alloc has for 'end'
don't work well for unsigned types.
Since idr_alloc_u32() returns an errno instead of the allocated ID, mark
it as __must_check to help callers use it correctly. Include copious
kernel-doc. Chris Mi <[email protected]> has promised to contribute
test-cases for idr_alloc_u32.
Signed-off-by: Matthew Wilcox <[email protected]>
|
|
Simply changing idr_remove's 'id' argument to 'unsigned long' works
for all callers.
Signed-off-by: Matthew Wilcox <[email protected]>
|
|
Changing idr_replace's 'id' argument to 'unsigned long' works for all
callers. Callers which passed a negative ID now get -ENOENT instead of
-EINVAL. No callers relied on this error value.
Signed-off-by: Matthew Wilcox <[email protected]>
|
|
Simply changing idr_remove's 'id' argument to 'unsigned long' suffices
for all callers.
Signed-off-by: Matthew Wilcox <[email protected]>
|
|
Conflicts:
arch/arm64/kernel/entry.S
arch/x86/Kconfig
include/linux/sched/mm.h
kernel/fork.c
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- videobuf2 was moved to a media/common dir, as it is now used by the
DVB subsystem too
- Digital TV core memory mapped support interface
- new sensor driver: ov7740
- several improvements at ddbridge driver
- new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel
SoCs
- new tuner driver: tda18250
- finally got rid of all LIRC staging drivers
- as we don't have old lirc drivers anymore, restruct the lirc device
code
- add support for UVC metadata
- add a new staging driver for NVIDIA Tegra Video Decoder Engine
- DVB kAPI headers moved to include/media
- synchronize the kAPI and uAPI for the DVB subsystem, removing the gap
for non-legacy APIs
- reduce the kAPI gap for V4L2
- lots of other driver enhancements, cleanups, etc.
* tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits)
media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs
media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic
media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors
media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type
media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32
media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer
media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32
media: v4l2-compat-ioctl32.c: avoid sizeof(type)
media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32
media: v4l2-compat-ioctl32.c: fix the indentation
media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF
media: v4l2-ioctl.c: don't copy back the result for -ENOTTY
media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt
media: vivid: fix module load error when enabling fb and no_error_inj=1
media: dvb_demux: improve debug messages
media: dvb_demux: Better handle discontinuity errors
media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
media: ts2020: avoid integer overflows on 32 bit machines
media: i2c: ov7740: use gpio/consumer.h instead of gpio.h
media: entity: Add a nop variant of media_entity_cleanup
...
|
|
Pull more rdma updates from Doug Ledford:
"Items of note:
- two patches fix a regression in the 4.15 kernel. The 4.14 kernel
worked fine with NVMe over Fabrics and mlx5 adapters. That broke in
4.15. The fix is here.
- one of the patches (the endian notation patch from Lijun) looks
like a lot of lines of change, but it's mostly mechanical in
nature. It amounts to the biggest chunk of change in it (it's about
2/3rds of the overall pull request).
Summary:
- Clean up some function signatures in rxe for clarity
- Tidy the RDMA netlink header to remove unimplemented constants
- bnxt_re driver fixes, one is a regression this window.
- Minor hns driver fixes
- Various fixes from Dan Carpenter and his tool
- Fix IRQ cleanup race in HFI1
- HF1 performance optimizations and a fix to report counters in the right units
- Fix for an IPoIB startup sequence race with the external manager
- Oops fix for the new kabi path
- Endian cleanups for hns
- Fix for mlx5 related to the new automatic affinity support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (38 commits)
net/mlx5: increase async EQ to avoid EQ overrun
mlx5: fix mlx5_get_vector_affinity to start from completion vector 0
RDMA/hns: Fix the endian problem for hns
IB/uverbs: Use the standard kConfig format for experimental
IB: Update references to libibverbs
IB/hfi1: Add 16B rcvhdr trace support
IB/hfi1: Convert kzalloc_node and kcalloc to use kcalloc_node
IB/core: Avoid a potential OOPs for an unused optional parameter
IB/core: Map iWarp AH type to undefined in rdma_ah_find_type
IB/ipoib: Fix for potential no-carrier state
IB/hfi1: Show fault stats in both TX and RX directions
IB/hfi1: Remove blind constants from 16B update
IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit times
IB/hfi1: Do not override given pcie_pset value
IB/hfi1: Optimize process_receive_ib()
IB/hfi1: Remove unnecessary fecn and becn fields
IB/hfi1: Look up ibport using a pointer in receive path
IB/hfi1: Optimize packet type comparison using 9B and bypass code paths
IB/hfi1: Compute BTH only for RDMA_WRITE_LAST/SEND_LAST packet
IB/hfi1: Remove dependence on qp->s_hdrwords
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ross Zwisler:
- Require struct page by default for filesystem DAX to remove a number
of surprising failure cases. This includes failures with direct I/O,
gdb and fork(2).
- Add support for the new Platform Capabilities Structure added to the
NFIT in ACPI 6.2a. This new table tells us whether the platform
supports flushing of CPU and memory controller caches on unexpected
power loss events.
- Revamp vmem_altmap and dev_pagemap handling to clean up code and
better support future future PCI P2P uses.
- Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has
become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL
spec, and instead rely on the generic ND_CMD_CALL approach used by
the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}.
- Enhance nfit_test so we can test some of the new things added in
version 1.6 of the DSM specification. This includes testing firmware
download and simulating the Last Shutdown State (LSS) status.
* tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits)
libnvdimm, namespace: remove redundant initialization of 'nd_mapping'
acpi, nfit: fix register dimm error handling
libnvdimm, namespace: make min namespace size 4K
tools/testing/nvdimm: force nfit_test to depend on instrumented modules
libnvdimm/nfit_test: adding support for unit testing enable LSS status
libnvdimm/nfit_test: add firmware download emulation
nfit-test: Add platform cap support from ACPI 6.2a to test
libnvdimm: expose platform persistence attribute for nd_region
acpi: nfit: add persistent memory control flag for nd_region
acpi: nfit: Add support for detect platform CPU cache flush on power loss
device-dax: Fix trailing semicolon
libnvdimm, btt: fix uninitialized err_lock
dax: require 'struct page' by default for filesystem dax
ext2: auto disable dax instead of failing mount
ext4: auto disable dax instead of failing mount
mm, dax: introduce pfn_t_special()
mm: Fix devm_memremap_pages() collision handling
mm: Fix memory size alignment in devm_memremap_pages_release()
memremap: merge find_dev_pagemap into get_dev_pagemap
memremap: change devm_memremap_pages interface to use struct dev_pagemap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- skip AER driver error recovery callbacks for correctable errors
reported via ACPI APEI, as we already do for errors reported via the
native path (Tyler Baicar)
- fix DPC shared interrupt handling (Alex Williamson)
- print full DPC interrupt number (Keith Busch)
- enable DPC only if AER is available (Keith Busch)
- simplify DPC code (Bjorn Helgaas)
- calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
Helgaas)
- enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
Helgaas)
- move ASPM internal interfaces out of public header (Bjorn Helgaas)
- allow hot-removal of VGA devices (Mika Westerberg)
- speed up unplug and shutdown by assuming Thunderbolt controllers
don't support Command Completed events (Lukas Wunner)
- add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
Jay Cornwall)
- expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)
- clean up PCI DMA interface usage (Christoph Hellwig)
- remove PCI pool API (replaced with DMA pool) (Romain Perier)
- deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
Kaya)
- move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)
- add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)
- remove warnings on sysfs mmap failure (Bjorn Helgaas)
- quiet ROM validation messages (Alex Deucher)
- remove redundant memory alloc failure messages (Markus Elfring)
- fill in types for compile-time VGA and other I/O port resources
(Bjorn Helgaas)
- make "pci=pcie_scan_all" work for Root Ports as well as Downstream
Ports to help AmigaOne X1000 (Bjorn Helgaas)
- add SPDX tags to all PCI files (Bjorn Helgaas)
- quirk Marvell 9128 DMA aliases (Alex Williamson)
- quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)
- fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
Cassel)
- use DMA API to get MSI address for DesignWare IP (Niklas Cassel)
- fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)
- fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)
- add support for ARTPEC-7 SoC (Niklas Cassel)
- add endpoint-mode support for ARTPEC (Niklas Cassel)
- add Cadence PCIe host and endpoint controller driver (Cyrille
Pitchen)
- handle multiple INTx status bits being set in dra7xx (Vignesh R)
- translate dra7xx hwirq range to fix INTD handling (Vignesh R)
- remove deprecated Exynos PHY initialization code (Jaehoon Chung)
- fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)
- fix NULL pointer dereference in iProc BCMA driver (Ray Jui)
- fix Keystone interrupt-controller-node lookup (Johan Hovold)
- constify qcom driver structures (Julia Lawall)
- rework Tegra config space mapping to increase space available for
endpoints (Vidya Sagar)
- simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)
- remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)
- add support for Global Fabric Manager Server (GFMS) event to
Microsemi Switchtec switch driver (Logan Gunthorpe)
- add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)
* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
...
|
|
Commit d350a823020e ("net: erspan: create erspan metadata uapi header")
moves the erspan 'version' in front of the 'struct erspan_md2' for
later extensibility reason. This breaks the existing erspan metadata
extraction code because the erspan_md2 then has a 4-byte offset
to between the erspan_metadata and erspan_base_hdr. This patch
fixes it.
Fixes: 1a66a836da63 ("gre: add collect_md mode to ERSPAN tunnel")
Fixes: ef7baf5e083c ("ip6_gre: add ip6 erspan collect_md mode")
Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code")
Signed-off-by: William Tu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The selftests test_maps program was leaving dangling BPF sockmap
programs around because not all psock elements were removed from
the map. The elements in turn hold a reference on the BPF program
they are attached to causing BPF programs to stay open even after
test_maps has completed.
The original intent was that sk_state_change() would be called
when TCP socks went through TCP_CLOSE state. However, because
socks may be in SOCK_DEAD state or the sock may be a listening
socket the event is not always triggered.
To resolve this use the ULP infrastructure and register our own
proto close() handler. This fixes the above case.
Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support")
Reported-by: Prashant Bhole <[email protected]>
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Create a UID field and enum that can be used to assign ULPs to
sockets. This saves a set of string comparisons if the ULP id
is known.
For sockmap, which is added in the next patches, a ULP is used to
hook into TCP sockets close state. In this case the ULP being added
is done at map insert time and the ULP is known and done on the kernel
side. In this case the named lookup is not needed. Because we don't
want to expose psock internals to user space socket options a user
visible flag is also added. For TLS this is set for BPF it will be
cleared.
Alos remove pr_notice, user gets an error code back and should check
that rather than rely on logs.
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Version 20180105.
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
including tool signons.
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Moving the qrwlock struct definition into a header file introduced
a subtle bug on all little-endian machines, where some files in some
configurations would see the fields in an incorrect order. This was
found by building with an LTO enabled compiler that warns every time we
try to link together files with incompatible data structures.
A second patch changes linux/kconfig.h to always define the symbols,
but this seems to be the root cause of most of the issues, so I'd suggest
we do both.
On a current linux-next kernel, I verified that this header is
responsible for all type mismatches as a result from the endianess
confusion.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Babu Moger <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Nicolas Pitre <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Fixes: e0d02285f16e ("locking/qrwlock: Use 'struct qrwlock' instead of 'struct __qrwlock'")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
For some reason these were missing, I've not observed this patch
making a difference in the few code locations I checked, but this
makes sense.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The select_idle_sibling() (SIS) rewrite in commit:
10e2f1acd010 ("sched/core: Rewrite and improve select_idle_siblings()")
... replaced a domain iteration with a search that broadly speaking
does a wrapped walk of the scheduler domain sharing a last-level-cache.
While this had a number of improvements, one consequence is that two tasks
that share a waker/wakee relationship push each other around a socket. Even
though two tasks may be active, all cores are evenly used. This is great from
a search perspective and spreads a load across individual cores, but it has
adverse consequences for cpufreq. As each CPU has relatively low utilisation,
cpufreq may decide the utilisation is too low to used a higher P-state and
overall computation throughput suffers.
While individual cpufreq and cpuidle drivers may compensate by artifically
boosting P-state (at c0) or avoiding lower C-states (during idle), it does
not help if hardware-based cpufreq (e.g. HWP) is used.
This patch tracks a recently used CPU based on what CPU a task was running
on when it last was a waker a CPU it was recently using when a task is a
wakee. During SIS, the recently used CPU is used as a target if it's still
allowed by the task and is idle.
The benefit may be non-obvious so consider an example of two tasks
communicating back and forth. Task A may be an application doing IO where
task B is a kworker or kthread like journald. Task A may issue IO, wake
B and B wakes up A on completion. With the existing scheme this may look
like the following (potentially different IDs if SMT is in use but similar
principal applies).
A (cpu 0) wake B (wakes on cpu 1)
B (cpu 1) wake A (wakes on cpu 2)
A (cpu 2) wake B (wakes on cpu 3)
etc.
A careful reader may wonder why CPU 0 was not idle when B wakes A the
first time and it's simply due to the fact that A can be rescheduled to
another CPU and the pattern is that prev == target when B tries to wakeup A
and the information about CPU 0 has been lost.
With this patch, the pattern is more likely to be:
A (cpu 0) wake B (wakes on cpu 1)
B (cpu 1) wake A (wakes on cpu 0)
A (cpu 0) wake B (wakes on cpu 1)
etc
i.e. two communicating casts are more likely to use just two cores instead
of all available cores sharing a LLC.
The most dramatic speedup was noticed on dbench using the XFS filesystem on
UMA as clients interact heavily with workqueues in that configuration. Note
that a similar speedup is not observed on ext4 as the wakeup pattern
is different:
4.15.0-rc9 4.15.0-rc9
waprev-v1 biasancestor-v1
Hmean 1 287.54 ( 0.00%) 817.01 ( 184.14%)
Hmean 2 1268.12 ( 0.00%) 1781.24 ( 40.46%)
Hmean 4 1739.68 ( 0.00%) 1594.47 ( -8.35%)
Hmean 8 2464.12 ( 0.00%) 2479.56 ( 0.63%)
Hmean 64 1455.57 ( 0.00%) 1434.68 ( -1.44%)
The results can be less dramatic on NUMA where automatic balancing interferes
with the test. It's also known that network benchmarks running on localhost
also benefit quite a bit from this patch (roughly 10% on netperf RR for UDP
and TCP depending on the machine). Hackbench also seens small improvements
(6-11% depending on machine and thread count). The facebook schbench was also
tested but in most cases showed little or no different to wakeup latencies.
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"This work from Amir adds NFS export capability to overlayfs. NFS
exporting an overlay filesystem is a challange because we want to keep
track of any copy-up of a file or directory between encoding the file
handle and decoding it.
This is achieved by indexing copied up objects by lower layer file
handle. The index is already used for hard links, this patchset
extends the use to NFS file handle decoding"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (51 commits)
ovl: check ERR_PTR() return value from ovl_encode_fh()
ovl: fix regression in fsnotify of overlay merge dir
ovl: wire up NFS export operations
ovl: lookup indexed ancestor of lower dir
ovl: lookup connected ancestor of dir in inode cache
ovl: hash non-indexed dir by upper inode for NFS export
ovl: decode pure lower dir file handles
ovl: decode indexed dir file handles
ovl: decode lower file handles of unlinked but open files
ovl: decode indexed non-dir file handles
ovl: decode lower non-dir file handles
ovl: encode lower file handles
ovl: copy up before encoding non-connectable dir file handle
ovl: encode non-indexed upper file handles
ovl: decode connected upper dir file handles
ovl: decode pure upper file handles
ovl: encode pure upper file handles
ovl: document NFS export
vfs: factor out helpers d_instantiate_anon() and d_alloc_anon()
ovl: store 'has_upper' and 'opaque' as bit flags
...
|
|
Provide core serializing membarrier command to support memory reclaim
by JIT.
Each architecture needs to explicitly opt into that support by
documenting in their architecture code how they provide the core
serializing instructions required when returning from the membarrier
IPI, and after the scheduler has updated the curr->mm pointer (before
going back to user-space). They should then select
ARCH_HAS_MEMBARRIER_SYNC_CORE to enable support for that command on
their architecture.
Architectures selecting this feature need to either document that
they issue core serializing instructions when returning to user-space,
or implement their architecture-specific sync_core_before_usermode().
Signed-off-by: Mathieu Desnoyers <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrea Parri <[email protected]>
Cc: Andrew Hunter <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Dave Watson <[email protected]>
Cc: David Sehr <[email protected]>
Cc: Greg Hackmann <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Maged Michael <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Russell King <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Introduce an architecture function that ensures the current CPU
issues a core serializing instruction before returning to usermode.
This is needed for the membarrier "sync_core" command.
Architectures defining the sync_core_before_usermode() static inline
need to select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE.
Signed-off-by: Mathieu Desnoyers <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrea Parri <[email protected]>
Cc: Andrew Hunter <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Dave Watson <[email protected]>
Cc: David Sehr <[email protected]>
Cc: Greg Hackmann <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Maged Michael <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Russell King <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Allow expedited membarrier to be used for data shared between processes
through shared memory.
Processes wishing to receive the membarriers register with
MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED. Those which want to issue
membarrier invoke MEMBARRIER_CMD_GLOBAL_EXPEDITED.
This allows extremely simple kernel-level implementation: we have almost
everything we need with the PRIVATE_EXPEDITED barrier code. All we need
to do is to add a flag in the mm_struct that will be used to check
whether we need to send the IPI to the current thread of each CPU.
There is a slight downside to this approach compared to targeting
specific shared memory users: when performing a membarrier operation,
all registered "global" receivers will get the barrier, even if they
don't share a memory mapping with the sender issuing
MEMBARRIER_CMD_GLOBAL_EXPEDITED.
This registration approach seems to fit the requirement of not
disturbing processes that really deeply care about real-time: they
simply should not register with MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED.
In order to align the membarrier command names, the "MEMBARRIER_CMD_SHARED"
command is renamed to "MEMBARRIER_CMD_GLOBAL", keeping an alias of
MEMBARRIER_CMD_SHARED to MEMBARRIER_CMD_GLOBAL for UAPI header backward
compatibility.
Signed-off-by: Mathieu Desnoyers <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrea Parri <[email protected]>
Cc: Andrew Hunter <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Dave Watson <[email protected]>
Cc: David Sehr <[email protected]>
Cc: Greg Hackmann <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Maged Michael <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Russell King <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Document the membarrier requirement on having a full memory barrier in
__schedule() after coming from user-space, before storing to rq->curr.
It is provided by smp_mb__after_spinlock() in __schedule().
Document that membarrier requires a full barrier on transition from
kernel thread to userspace thread. We currently have an implicit barrier
from atomic_dec_and_test() in mmdrop() that ensures this.
The x86 switch_mm_irqs_off() full barrier is currently provided by many
cpumask update operations as well as write_cr3(). Document that
write_cr3() provides this barrier.
Signed-off-by: Mathieu Desnoyers <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrea Parri <[email protected]>
Cc: Andrew Hunter <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Dave Watson <[email protected]>
Cc: David Sehr <[email protected]>
Cc: Greg Hackmann <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Maged Michael <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Russell King <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Allow PowerPC to skip the full memory barrier in switch_mm(), and
only issue the barrier when scheduling into a task belonging to a
process that has registered to use expedited private.
Threads targeting the same VM but which belong to different thread
groups is a tricky case. It has a few consequences:
It turns out that we cannot rely on get_nr_threads(p) to count the
number of threads using a VM. We can use
(atomic_read(&mm->mm_users) == 1 && get_nr_threads(p) == 1)
instead to skip the synchronize_sched() for cases where the VM only has
a single user, and that user only has a single thread.
It also turns out that we cannot use for_each_thread() to set
thread flags in all threads using a VM, as it only iterates on the
thread group.
Therefore, test the membarrier state variable directly rather than
relying on thread flags. This means
membarrier_register_private_expedited() needs to set the
MEMBARRIER_STATE_PRIVATE_EXPEDITED flag, issue synchronize_sched(), and
only then set MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY which allows
private expedited membarrier commands to succeed.
membarrier_arch_switch_mm() now tests for the
MEMBARRIER_STATE_PRIVATE_EXPEDITED flag.
Signed-off-by: Mathieu Desnoyers <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Andrea Parri <[email protected]>
Cc: Andrew Hunter <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Dave Watson <[email protected]>
Cc: David Sehr <[email protected]>
Cc: Greg Hackmann <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Maged Michael <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Russell King <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Pull remoteproc updates from Bjorn Andersson:
"This contains a few bug fixes and a cleanup up of the resource-table
handling in the framework, which removes the need for drivers with no
resource table to provide a fake one"
* tag 'rproc-v4.16' of git://github.com/andersson/remoteproc:
remoteproc: Reset table_ptr on stop
remoteproc: Drop dangling find_rsc_table dummies
remoteproc: Move resource table load logic to find
remoteproc: Don't handle empty resource table
remoteproc: Merge rproc_ops and rproc_fw_ops
remoteproc: Clone rproc_ops in rproc_alloc()
remoteproc: Cache resource table size
remoteproc: Remove depricated crash completion
virtio_remoteproc: correct put_device virtio_device.dev
|
|
The consumers of this routine expects the affinity map of of vector
index relative to the first completion vector. The upper layers are
not aware of internal/private completion vectors that mlx5 allocates
for its own usage.
Hence, return the affinity map of vector index relative to the first
completion vector.
Fixes: 05e0cc84e00c ("net/mlx5: Fix get vector affinity helper function")
Reported-by: Logan Gunthorpe <[email protected]>
Tested-by: Max Gurtovoy <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Cc: <[email protected]> # v4.15
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2018-02-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) support XDP attach in libbpf, from Eric.
2) minor fixes, from Daniel, Jakub, Yonghong, Alexei.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull spectre/meltdown updates from Thomas Gleixner:
"The next round of updates related to melted spectrum:
- The initial set of spectre V1 mitigations:
- Array index speculation blocker and its usage for syscall,
fdtable and the n180211 driver.
- Speculation barrier and its usage in user access functions
- Make indirect calls in KVM speculation safe
- Blacklisting of known to be broken microcodes so IPBP/IBSR are not
touched.
- The initial IBPB support and its usage in context switch
- The exposure of the new speculation MSRs to KVM guests.
- A fix for a regression in x86/32 related to the cpu entry area
- Proper whitelisting for known to be safe CPUs from the mitigations.
- objtool fixes to deal proper with retpolines and alternatives
- Exclude __init functions from retpolines which speeds up the boot
process.
- Removal of the syscall64 fast path and related cleanups and
simplifications
- Removal of the unpatched paravirt mode which is yet another source
of indirect unproteced calls.
- A new and undisputed version of the module mismatch warning
- A couple of cleanup and correctness fixes all over the place
Yet another step towards full mitigation. There are a few things still
missing like the RBS underflow mitigation for Skylake and other small
details, but that's being worked on.
That said, I'm taking a belated christmas vacation for a week and hope
that everything is magically solved when I'm back on Feb 12th"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL
KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL
KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES
KVM/x86: Add IBPB support
KVM/x86: Update the reverse_cpuid list to include CPUID_7_EDX
x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL
x86/pti: Mark constant arrays as __initconst
x86/spectre: Simplify spectre_v2 command line parsing
x86/retpoline: Avoid retpolines for built-in __init functions
x86/kvm: Update spectre-v1 mitigation
KVM: VMX: make MSR bitmaps per-VCPU
x86/paravirt: Remove 'noreplace-paravirt' cmdline option
x86/speculation: Use Indirect Branch Prediction Barrier in context switch
x86/cpuid: Fix up "virtual" IBRS/IBPB/STIBP feature bits on Intel
x86/spectre: Fix spelling mistake: "vunerable"-> "vulnerable"
x86/spectre: Report get_user mitigation for spectre_v1
nl80211: Sanitize array index in parse_txq_params
vfs, fdtable: Prevent bounds-check bypass via speculative execution
x86/syscall: Sanitize syscall table de-references under speculation
x86/get_user: Use pointer masking to limit speculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of changes:
- a fixup for kexec related to 5-level paging mode. That covers most
of the cases except kexec from a 5-level kernel to a 4-level
kernel. The latter needs more work and is going to come in 4.17
- two trivial fixes for build warnings triggered by LTO and gcc-8"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/power: Fix swsusp_arch_resume prototype
x86/dumpstack: Avoid uninitlized variable
x86/kexec: Make kexec (mostly) work in 5-level paging mode
|
|
Pull more block updates from Jens Axboe:
"Most of this is fixes and not new code/features:
- skd fix from Arnd, fixing a build error dependent on sla allocator
type.
- blk-mq scheduler discard merging fixes, one from me and one from
Keith. This fixes a segment miscalculation for blk-mq-sched, where
we mistakenly think two segments are physically contigious even
though the request isn't carrying real data. Also fixes a bio-to-rq
merge case.
- Don't re-set a bit on the buffer_head flags, if it's already set.
This can cause scalability concerns on bigger machines and
workloads. From Kemi Wang.
- Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
distuingish between a local (device related) resource starvation
and a global one. The latter might happen without IO being in
flight, so it has to be handled a bit differently. From Ming"
* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
block: skd: fix incorrect linux/slab_def.h inclusion
buffer: Avoid setting buffer bits that are already set
blk-mq-sched: Enable merging discard bio into request
blk-mq: fix discard merge with scheduler attached
blk-mq: introduce BLK_STS_DEV_RESOURCE
|
|
Pull NTB updates from Jon Mason:
"Bug fixes galore, removal of the ntb atom driver, and updates to the
ntb tools and tests to support the multi-port interface"
* tag 'ntb-4.16' of git://github.com/jonmason/ntb: (37 commits)
NTB: ntb_perf: fix cast to restricted __le32
ntb_perf: Fix an error code in perf_copy_chunk()
ntb_hw_switchtec: Make function switchtec_ntb_remove() static
NTB: ntb_tool: fix memory leak on 'buf' on error exit path
NTB: ntb_perf: fix printing of resource_size_t
NTB: ntb_hw_idt: Set NTB_TOPO_SWITCH topology
NTB: ntb_test: Update ntb_perf tests
NTB: ntb_test: Update ntb_tool MW tests
NTB: ntb_test: Add ntb_tool Message tests
NTB: ntb_test: Update ntb_tool Scratchpad tests
NTB: ntb_test: Update ntb_tool DB tests
NTB: ntb_test: Update ntb_tool link tests
NTB: ntb_test: Add ntb_tool port tests
NTB: ntb_test: Safely use paths with whitespace
NTB: ntb_perf: Add full multi-port NTB API support
NTB: ntb_tool: Add full multi-port NTB API support
NTB: ntb_pp: Add full multi-port NTB API support
NTB: Fix UB/bug in ntb_mw_get_align()
NTB: Set dma mask and dma coherent mask to NTB devices
NTB: Rename NTB messaging API methods
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has the following changes for you:
- new flag to mark DMA safe buffers in i2c_msg. Also, some
infrastructure around it. And docs.
- huge refactoring of the at24 driver led by the new maintainer
Bartosz
- update I2C bus recovery to send STOP after recovery
- conversion from gpio to gpiod for I2C bus recovery
- adding a fault-injector to the i2c-gpio driver
- lots of small driver improvements, and bigger ones to
i2c-sh_mobile"
* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
i2c: mv64xxx: Add myself as maintainer for this driver
i2c: mv64xxx: Fix clock resource by adding an optional bus clock
i2c: mv64xxx: Remove useless test before clk_disable_unprepare
i2c: mxs: use true and false for boolean values
i2c: meson: update doc description to fix build warnings
i2c: meson: add configurable divider factors
dt-bindings: i2c: update documentation for the Meson-AXG
i2c: imx-lpi2c: add runtime pm support
i2c: rcar: fix some trivial typos in comments
i2c: davinci: fix the cpufreq transition
i2c: rk3x: add proper kerneldoc header
i2c: rk3x: account for const type of of_device_id.data
i2c: acorn: remove outdated path from file header
i2c: acorn: add MODULE_LICENSE tag
i2c: rcar: implement bus recovery
i2c: send STOP after successful bus recovery
i2c: ensure SDA is released in recovery if SDA is controllable
i2c: add 'set_sda' to bus_recovery_info
i2c: add identifier in declarations for i2c_bus_recovery
i2c: make kerneldoc about bus recovery more precise
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Refactor support for encrypted symlinks to move common code to fscrypt"
Ted also points out about the merge:
"This makes the f2fs symlink code use the fscrypt_encrypt_symlink()
from the fscrypt tree. This will end up dropping the kzalloc() ->
f2fs_kzalloc() change, which means the fscrypt-specific allocation
won't get tested by f2fs's kmalloc error injection system; which is
fine"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: (26 commits)
fscrypt: fix build with pre-4.6 gcc versions
fscrypt: remove 'ci' parameter from fscrypt_put_encryption_info()
fscrypt: document symlink length restriction
fscrypt: fix up fscrypt_fname_encrypted_size() for internal use
fscrypt: define fscrypt_fname_alloc_buffer() to be for presented names
fscrypt: calculate NUL-padding length in one place only
fscrypt: move fscrypt_symlink_data to fscrypt_private.h
fscrypt: remove fscrypt_fname_usr_to_disk()
ubifs: switch to fscrypt_get_symlink()
ubifs: switch to fscrypt ->symlink() helper functions
ubifs: free the encrypted symlink target
f2fs: switch to fscrypt_get_symlink()
f2fs: switch to fscrypt ->symlink() helper functions
ext4: switch to fscrypt_get_symlink()
ext4: switch to fscrypt ->symlink() helper functions
fscrypt: new helper function - fscrypt_get_symlink()
fscrypt: new helper functions for ->symlink()
fscrypt: trim down fscrypt.h includes
fscrypt: move fscrypt_is_dot_dotdot() to fs/crypto/fname.c
fscrypt: move fscrypt_valid_enc_modes() to fscrypt_private.h
...
|
|
Signed-off-by: Jung-uk Kim <jkim@free_BSD.org>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
This is more easy to read.
Signed-off-by: Jung-uk Kim <jkim@free_BSD.org>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
We should not assume NULL is defined as "(void *)0" because NULL is
an implementation-defined macro. Especially, Clang 6 complains about
it, i.e., "arithmetic on a null pointer treated as a cast from integer
to pointer is a GNU extension".
Signed-off-by: Jung-uk Kim <jkim@free_BSD.org>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
X32 follows ILP32 model. Check for ILP32 as well when checking for
x86_64 to ensure the defines are correct for X32 ABI.
Signed-off-by: Anuj Mittal <[email protected]>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|