| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- make the NuBus bus type static and constant
- defconfig updates
* tag 'm68k-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.7-rc1
nubus: Make nubus_bus_type static and constant
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kirill A. Shutemov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[[email protected]: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Zi Yan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- The EDAC drivers part of the effort to make the ->remove() platform
driver callback return void
- Add support for AMD AI accelerators
- Add support for a number of Intel SoCs: Alder Lake-N, Raptor Lake-P,
Meteor Lake-{P,PS}
- Random fixes and cleanups all over the place
* tag 'edac_updates_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (39 commits)
EDAC/skx_common: Filter out the invalid address
EDAC, pnd2: Sort headers alphabetically
EDAC, pnd2: Correct misleading error message in mk_region_mask()
EDAC, pnd2: Apply bit macros and helpers where it makes sense
EDAC, pnd2: Replace custom definition by one from sizes.h
EDAC/igen6: Add Intel Meteor Lake-P SoCs support
EDAC/igen6: Add Intel Meteor Lake-PS SoCs support
EDAC/igen6: Add Intel Raptor Lake-P SoCs support
EDAC/igen6: Add Intel Alder Lake-N SoCs support
EDAC/igen6: Make get_mchbar() helper function
EDAC/amd64: Add support for family 0x19, models 0x90-9f devices
EDAC/mc: Add support for HBM3 memory type
EDAC/{sb,i7core}_edac: Do not use a plain integer for a NULL pointer
EDAC/armada_xp: Explicitly include correct DT includes
EDAC/pci_sysfs: Use PCI_HEADER_TYPE_MASK instead of literals
EDAC/thunderx: Fix possible out-of-bounds string access
EDAC/fsl_ddr: Convert to platform remove callback returning void
EDAC/zynqmp: Convert to platform remove callback returning void
EDAC/xgene: Convert to platform remove callback returning void
EDAC/ti: Convert to platform remove callback returning void
...
|
|
- power management improvement for EHL OOB wakeup in intel-ish (Kai-Heng Feng)
- generic intel-ish code cleanups (Even Xu)
|
|
- bus_type constification (Greg Kroah-Hartman)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iov_iter cleanups from Christian Brauner:
"This contains a minor cleanup. The patches drop an unused argument
from import_single_range() allowing to replace import_single_range()
with import_ubuf() and dropping import_single_range() completely"
* tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: replace import_single_range() with import_ubuf()
iov_iter: remove unused 'iov' argument from import_single_range()
|
|
We don't need to do any gymnastics if we don't have an io_context
assigned at all, so just return early with our default priority.
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We call this once per IO, which can be millions of times per second.
Since nobody really uses io priorities, or at least it isn't very
common, this is all wasted time and can amount to as much as 3% of
the total kernel time.
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull vfs rw updates from Christian Brauner:
"This contains updates from Amir for read-write backing file helpers
for stacking filesystems such as overlayfs:
- Fanotify is currently in the process of introducing pre content
events. Roughly, a new permission event will be added indicating
that it is safe to write to the file being accessed. These events
are used by hierarchical storage managers to e.g., fill the content
of files on first access.
During that work we noticed that our current permission checking is
inconsistent in rw_verify_area() and remap_verify_area().
Especially in the splice code permission checking is done multiple
times. For example, one time for the whole range and then again for
partial ranges inside the iterator.
In addition, we mostly do permission checking before we call
file_start_write() except for a few places where we call it after.
For pre-content events we need such permission checking to be done
before file_start_write(). So this is a nice reason to clean this
all up.
After this series, all permission checking is done before
file_start_write().
As part of this cleanup we also massaged the splice code a bit. We
got rid of a few helpers because we are alredy drowning in special
read-write helpers. We also cleaned up the return types for splice
helpers.
- Introduce generic read-write helpers for backing files. This lifts
some overlayfs code to common code so it can be used by the FUSE
passthrough work coming in over the next cycles. Make Amir and
Miklos the maintainers for this new subsystem of the vfs"
* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: fix __sb_write_started() kerneldoc formatting
fs: factor out backing_file_mmap() helper
fs: factor out backing_file_splice_{read,write}() helpers
fs: factor out backing_file_{read,write}_iter() helpers
fs: prepare for stackable filesystems backing file helpers
fsnotify: optionally pass access range in file permission hooks
fsnotify: assert that file_start_write() is not held in permission hooks
fsnotify: split fsnotify_perm() into two hooks
fs: use splice_copy_file_range() inline helper
splice: return type ssize_t from all helpers
fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
fs: move file_start_write() into direct_splice_actor()
fs: fork splice_file_range() from do_splice_direct()
fs: create {sb,file}_write_not_started() helpers
fs: create file_write_started() helper
fs: create __sb_write_started() helper
fs: move kiocb_start_write() into vfs_iocb_iter_write()
fs: move permission hook out of do_iter_read()
fs: move permission hook out of do_iter_write()
fs: move file_start_write() into vfs_iter_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs super updates from Christian Brauner:
"This contains the super work for this cycle including the long-awaited
series by Jan to make it possible to prevent writing to mounted block
devices:
- Writing to mounted devices is dangerous and can lead to filesystem
corruption as well as crashes. Furthermore syzbot comes with more
and more involved examples how to corrupt block device under a
mounted filesystem leading to kernel crashes and reports we can do
nothing about. Add tracking of writers to each block device and a
kernel cmdline argument which controls whether other writeable
opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are
allowed.
Note that this effectively only prevents modification of the
particular block device's page cache by other writers. The actual
device content can still be modified by other means - e.g. by
issuing direct scsi commands, by doing writes through devices lower
in the storage stack (e.g. in case loop devices, DM, or MD are
involved) etc. But blocking direct modifications of the block
device page cache is enough to give filesystems a chance to perform
data validation when loading data from the underlying storage and
thus prevent kernel crashes.
Syzbot can use this cmdline argument option to avoid uninteresting
crashes. Also users whose userspace setup does not need writing to
mounted block devices can set this option for hardening. We expect
that this will be interesting to quite a few workloads.
Btrfs is currently opted out of this because they still haven't
merged patches we require for this to work from three kernel
releases ago.
- Reimplement block device freezing and thawing as holder operations
on the block device.
This allows us to extend block device freezing to all devices
associated with a superblock and not just the main device. It also
allows us to remove get_active_super() and thus another function
that scans the global list of superblocks.
Freezing via additional block devices only works if the filesystem
chooses to use @fs_holder_ops for these additional devices as well.
That currently only includes ext4 and xfs.
Earlier releases switched get_tree_bdev() and mount_bdev() to use
@fs_holder_ops. The remaining nilfs2 open-coded version of
mount_bdev() has been converted to rely on @fs_holder_ops as well.
So block device freezing for the main block device will continue to
work as before.
There should be no regressions in functionality. The only special
case is btrfs where block device freezing for the main block device
never worked because sb->s_bdev isn't set. Block device freezing
for btrfs can be fixed once they can switch to @fs_holder_ops but
that can happen whenever they're ready"
* tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
block: Fix a memory leak in bdev_open_by_dev()
super: don't bother with WARN_ON_ONCE()
super: massage wait event mechanism
ext4: Block writes to journal device
xfs: Block writes to log device
fs: Block writes to mounted block devices
btrfs: Do not restrict writes to btrfs devices
block: Add config option to not allow writing to mounted devices
block: Remove blkdev_get_by_*() functions
bcachefs: Convert to bdev_open_by_path()
fs: handle freezing from multiple devices
fs: remove dead check
nilfs2: simplify device handling
fs: streamline thaw_super_locked
ext4: simplify device handling
xfs: simplify device handling
fs: simplify setup_bdev_super() calls
blkdev: comment fs_holder_ops
porting: document block device freeze and thaw changes
fs: remove unused helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
|
|
__put_unaligned_be24() and friends use implicit casts to convert
larger-sized data to bytes, which trips sparse truncation warnings when
the argument is a constant:
CC [M] drivers/input/touchscreen/hynitron_cstxxx.o
CHECK drivers/input/touchscreen/hynitron_cstxxx.c
drivers/input/touchscreen/hynitron_cstxxx.c: note: in included file (through arch/x86/include/generated/asm/unaligned.h):
include/asm-generic/unaligned.h:119:16: warning: cast truncates bits from constant value (aa01a0 becomes a0)
include/asm-generic/unaligned.h:120:20: warning: cast truncates bits from constant value (aa01 becomes 1)
include/asm-generic/unaligned.h:119:16: warning: cast truncates bits from constant value (ab00d0 becomes d0)
include/asm-generic/unaligned.h:120:20: warning: cast truncates bits from constant value (ab00 becomes 0)
To avoid this let's mask off upper bits explicitly, the resulting code
should be exactly the same, but it will keep sparse happy.
Reported-by: kernel test robot <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
disk_clear_zoned is unused now that the last warts of the host-aware
model support in sd are gone.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
KVM Xen change for 6.8:
To workaround Xen guests that don't expect Xen PV clocks to be marked as being
based on a stable TSC, add a Xen config knob to allow userspace to opt out of
KVM setting the "TSC stable" bit in Xen PV clocks. Note, the "TSC stable" bit
was added to the PVCLOCK ABI by KVM without an ack from Xen, i.e. KVM isn't
entirely blameless for the buggy guest behavior.
|
|
Merge system-wide power management updates for 6.8-rc1:
- Fix possible deadlocks in the core system-wide PM code that occur if
device-handling functions cannot be executed asynchronously during
resune from system-wide suspend (Rafael J. Wysocki).
- Clean up unnecessary local variable initializations in multiple
places in the hibernation code (Wang chaodong, Li zeming).
- Adjust core hibernation code to avoid missing wakeup events that
occur after saving an image to persistent storage (Chris Feng).
- Update hibernation code to enforce correct ordering during image
compression and decompression (Hongchen Zhang).
- Use kmap_local_page() instead of kmap_atomic() in copy_data_page()
during hibernation and restore (Chen Haonan).
- Adjust documentation and code comments to reflect recent task freezer
changes (Kevin Hao).
- Repair excess function parameter description warning in the
hibernation image-saving code (Randy Dunlap).
* pm-sleep:
PM: sleep: Fix possible deadlocks in core system-wide PM code
async: Introduce async_schedule_dev_nocall()
async: Split async_schedule_node_domain()
PM: hibernate: Repair excess function parameter description warning
PM: sleep: Remove obsolete comment from unlock_system_sleep()
Documentation: PM: Adjust freezing-of-tasks.rst to the freezer changes
PM: hibernate: Use kmap_local_page() in copy_data_page()
PM: hibernate: Enforce ordering during image compression/decompression
PM: hibernate: Avoid missing wakeup events during hibernation
PM: hibernate: Do not initialize error in snapshot_write_next()
PM: hibernate: Do not initialize error in swap_write_page()
PM: hibernate: Drop unnecessary local variable initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp
Merge OPP (Operating Performance Points) updates for 6.8 from Viresh
Kumar:
"- Fix _set_required_opps when opp is NULL (Bryan O'Donoghue).
- ti: Use device_get_match_data() (Rob Herring).
- Minor cleanups around OPP level and other parts and call
dev_pm_opp_set_opp() recursively for required OPPs (Viresh Kumar)."
* tag 'opp-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Rename 'rate_clk_single'
OPP: Pass rounded rate to _set_opp()
OPP: Relocate dev_pm_opp_sync_regulators()
OPP: Move dev_pm_opp_icc_bw to internal opp.h
OPP: Fix _set_required_opps when opp is NULL
OPP: The level field is always of unsigned int type
OPP: Check for invalid OPP in dev_pm_opp_find_level_ceil()
OPP: Don't set OPP recursively for a parent genpd
OPP: Call dev_pm_opp_set_opp() for required OPPs
OPP: Use _set_opp_level() for single genpd case
OPP: Level zero is valid
opp: ti: Use device_get_match_data()
|
|
for the v6.8 merge window
This fix didn't make it upstream in time, pick it up
for the v6.8 merge window.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
|
|
Revert "net/mlx5: Implement management PF Ethernet profile"
This reverts commit 22c4640698a1d47606b5a4264a584e8046641784.
Revert "net/mlx5: Enable SD feature"
This reverts commit c88c49ac9c18fb7c3fa431126de1d8f8f555e912.
Revert "net/mlx5e: Block TLS device offload on combined SD netdev"
This reverts commit 83a59ce0057b7753d7fbece194b89622c663b2a6.
Revert "net/mlx5e: Support per-mdev queue counter"
This reverts commit d72baceb92539a178d2610b0e9ceb75706a75b55.
Revert "net/mlx5e: Support cross-vhca RSS"
This reverts commit c73a3ab8fa6e93a783bd563938d7cf00d62d5d34.
Revert "net/mlx5e: Let channels be SD-aware"
This reverts commit e4f9686bdee7b4dd89e0ed63cd03606e4bda4ced.
Revert "net/mlx5e: Create EN core HW resources for all secondary devices"
This reverts commit c4fb94aa822d6c9d05fc3c5aee35c7e339061dc1.
Revert "net/mlx5e: Create single netdev per SD group"
This reverts commit e2578b4f983cfcd47837bbe3bcdbf5920e50b2ad.
Revert "net/mlx5: SD, Add informative prints in kernel log"
This reverts commit c82d360325112ccc512fc11a3b68cdcdf04a1478.
Revert "net/mlx5: SD, Implement steering for primary and secondaries"
This reverts commit 605fcce33b2d1beb0139b6e5913fa0b2062116b2.
Revert "net/mlx5: SD, Implement devcom communication and primary election"
This reverts commit a45af9a96740873db9a4b5bb493ce2ad81ccb4d5.
Revert "net/mlx5: SD, Implement basic query and instantiation"
This reverts commit 63b9ce944c0e26c44c42cdd5095c2e9851c1a8ff.
Revert "net/mlx5: SD, Introduce SD lib"
This reverts commit 4a04a31f49320d078b8078e1da4b0e2faca5dfa3.
Revert "net/mlx5: Fix query of sd_group field"
This reverts commit e04984a37398b3f4f5a79c993b94c6b1224184cc.
Revert "net/mlx5e: Use the correct lag ports number when creating TISes"
This reverts commit a7e7b40c4bc115dbf2a2bb453d7bbb2e0ea99703.
There are some unanswered questions on the list, and we don't
have any docs. Given the lack of replies so far and the fact
that v6.8 merge window has started - let's revert this and
revisit for v6.9.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Revert "net: stmmac: Use interrupt mode INTM=1 for per channel irq"
This reverts commit 36af9f25ddfd311da82628f194c794786467cb12.
Revert "net: stmmac: Add support for TX/RX channel interrupt"
This reverts commit 9072e03d32088137a435ddf3aa95fd6e038d69d8.
Revert "net: stmmac: Make MSI interrupt routine generic"
This reverts commit 477bd4beb93bf9ace9bda71f1437b191befa9cf4.
Revert "dt-bindings: net: snps,dwmac: per channel irq"
This reverts commit 67d47c8ada0f8795bfcdb85cc8f2ad3ce556674b.
Device tree bindings need to be reviewed.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the fw_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Takashi Sakamoto <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/2023121931-skydiver-dodgy-d1bd@gregkh
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
Remove the @boardinfo: line to prevent the kernel-doc warning:
include/linux/i3c/master.h:98: warning: Excess struct member 'boardinfo' description in 'i2c_dev_desc'
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
In MIPI I3C Specification:
"Ninth Bit of SDR Target Returned (Read) Data as End-of-Data: In I2C, the
ninth Data bit from Target to Controller is an ACK by the Controller. By
contrast, in I3C this bit allows the Target to end a Read, and allows the
Controller to Abort a Read. In SDR terms, the ninth bit of Read data is
referred to as the T-Bit (for ‘Transition’)"
I3C allow devices early terminate data transfer. So need "actual_len" field
to indicate how much get by i3c_priv_xfer.
Reviewed-by: Miquel Raynal <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Add hotjoin entry in sys file system allow user enable/disable hotjoin
feature.
Add (*enable(disable)_hotjoin)() to i3c_master_controller_ops.
Add api i3c_master_enable(disable)_hotjoin();
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
sv_refcnt is no longer useful.
lockd and nfs-cb only ever have the svc active when there are a non-zero
number of threads, so sv_refcnt mirrors sv_nrthreads.
nfsd also keeps the svc active between when a socket is added and when
the first thread is started, but we don't really need a refcount for
that. We can simply not destroy the svc while there are any permanent
sockets attached.
So remove sv_refcnt and the get/put functions.
Instead of a final call to svc_put(), call svc_destroy() instead.
This is changed to also store NULL in the passed-in pointer to make it
easier to avoid use-after-free situations.
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
A future patch will remove refcounting on svc_serv as it is of little
use.
It is currently used to keep the svc around while the pool_stats file is
open.
Change this to get the pointer, protected by the mutex, only in
seq_start, and the release the mutex in seq_stop.
This means that if the nfsd server is stopped and restarted while the
pool_stats file it open, then some pool stats info could be from the
first instance and some from the second. This might appear odd, but is
unlikely to be a problem in practice.
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (ie, the client) stops responding.
We need to go back to handling RDMA Reads by getting the svc scheduler
to call svc_rdma_recvfrom() a second time to finish building an RPC
message after a Read completion.
This is the final patch, and makes several changes that have to
happen concurrently:
1. svc_rdma_process_read_list no longer waits for a completion, but
simply builds and posts the Read WRs.
2. svc_rdma_read_done() now queues a completed Read on
sc_read_complete_q for later processing rather than calling
complete().
3. The completed RPC message is no longer built in the
svc_rdma_process_read_list() path. Finishing the message is now
done in svc_rdma_recvfrom() when it notices work on the
sc_read_complete_q. The "finish building this RPC message" code
is removed from the svc_rdma_process_read_list() path.
This arrangement avoids the need for an nfsd thread to wait for an
RDMA Read non-interruptibly without a timeout. It's basically the
same code structure that Tom Tucker used for Read chunks along with
some clean-up and modernization.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Once a set of RDMA Reads are complete, the Read completion handler
will poke the transport to trigger a second call to
svc_rdma_recvfrom(). recvfrom() will then merge the RDMA Read
payloads with the previously received RPC header to form a completed
RPC Call message.
The new code is copied from the svc_rdma_process_read_list() path.
A subsequent patch will make use of this code and remove the code
that this was copied from (svc_rdma_rw.c).
Signed-off-by: Chuck Lever <[email protected]>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (ie, the client) stops responding.
We need to go back to handling RDMA Reads by allowing the nfsd
thread to return to the svc scheduler, then waking a second thread
finish the RPC message once the Read completion fires.
As a next step, add a list_head upon which completed Reads are queued.
A subsequent patch will make use of this queue.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (the client) stops responding. We
need to go back to handling RDMA Reads by allowing the nfsd thread
to return to the svc scheduler, then waking a second thread finish
the RPC message once the Read completion fires.
To start with, restore the rc_pages field so that RDMA Read pages
can be managed across calls to svc_rdma_recvfrom().
Signed-off-by: Chuck Lever <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
|
|
Now that the chunk_ctxt for Reads is no longer dynamically allocated
it can be initialized once for the life of the object that contains
it (struct svc_rdma_recv_ctxt).
Signed-off-by: Chuck Lever <[email protected]>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_build_read_segment() can use the recv_ctxt to derive that
information rather than the other way around. This removes one usage
of the ri_readctxt field, enabling its removal in a subsequent
patch.
At the same time, the use of ri_rqst can similarly be replaced with
a passed-in function parameter.
Start with build_read_segment() because it is a common utility
function at the bottom of the Read chunk path.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Further clean up: move the starting byte offset field into
svc_rdma_recv_ctxt.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Further clean up: move the page index field into svc_rdma_recv_ctxt.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Since the request's svc_rdma_recv_ctxt will stay around for the
duration of the RDMA Read operation, the contents of struct
svc_rdma_read_info can reside in the request's svc_rdma_recv_ctxt
rather than being allocated separately. This will eventually save a
call to kmalloc() in a hot path.
Start this clean-up by moving the Read chunk's svc_rdma_chunk_ctxt.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Prepare for nestling these into the send and recv ctxts so they
no longer have to be allocated dynamically.
Signed-off-by: Chuck Lever <[email protected]>
|
|
A send/recv_ctxt already records transport-related information
in the cq.id, thus there is no need to record the IP addresses of
the transport endpoints.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Update the DMA error flow tracepoints to report the completion ID of
the failing context. This ties the wait/failure to a particular
operation or request, which is more useful than knowing only the
failing transport.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Update the Send Queue's error flow tracepoints to report the
completion ID of the waiting or failing context. This ties the
wait/failure to a particular operation or request, which is a little
more useful than knowing only the transport that is about to close.
Signed-off-by: Chuck Lever <[email protected]>
|
|
De-duplicate some code, making it easier to add new tracepoints that
report only a completion ID.
Signed-off-by: Chuck Lever <[email protected]>
|
|
DMA unmapping can take quite some time, so it should not be handled
in a single-threaded completion handler. Defer releasing send_ctxts
to the recently-added workqueue.
With this patch, DMA unmapping can be handled in parallel, and it
does not cause head-of-queue blocking of Send completions.
Signed-off-by: Chuck Lever <[email protected]>
|
|
To handle work in the background, set up an UNBOUND workqueue for
svcrdma. Subsequent patches will make use of it.
Signed-off-by: Chuck Lever <[email protected]>
|
|
The svc_rdma_recv_ctxt free list uses a lockless list to avoid the
need for a spin lock in the fast path. llist_del_first(), which is
used by svc_rdma_recv_ctxt_get(), requires serialization, however,
when there are multiple list producers that are unserialized.
I mistakenly thought there was only one caller of
svc_rdma_recv_ctxt_get() (svc_rdma_refresh_recvs()), thus explicit
serialization would not be necessary. But there is another caller:
svc_rdma_bc_sendto(), and these two are not serialized against each
other. I haven't seen ill effects that I could directly ascribe to
a lack of serialization. It's just an observation based on code
audit.
When DMA-mapping before sending a Reply, the passed-in struct
svc_rdma_recv_ctxt is used only for its write and reply PCLs. These
are currently always empty in the backchannel case. So, instead of
passing a full svc_rdma_recv_ctxt object to
svc_rdma_map_reply_msg(), let's pass in just the Write and Reply
PCLs.
This change makes it unnecessary for the backchannel to acquire a
dummy svc_rdma_recv_ctxt object when sending an RPC Call. The need
for svc_rdma_recv_ctxt free list serialization is now completely
avoided.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Callback operations enum is defined in client and server, move it to
common header file.
Signed-off-by: ChenXiaoSong <[email protected]>
Acked-by: Anna Schumaker <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
This flag is no longer used.
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
NFSD will use this new API to determine whether nfsd_splice_read is
safe to use. This avoids the need to add a dependency to NFSD for
CONFIG_SUNRPC_GSS.
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
There is no support for per DMA channel interrupt for non-MSI platform,
where the MAC's per channel interrupt hooks up to interrupt controller(GIC)
through shared peripheral interrupt(SPI) to handle interrupt from TX/RX
transmit channel.
This patch generalize the existing MSI ISR to also support non-MSI
platform.
Signed-off-by: Teoh Ji Sheng <[email protected]>
Signed-off-by: Swee Leong Ching <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|