aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2023-02-22Merge branch 'pci/endpoint'Bjorn Helgaas2-15/+14
- Convert dra7xx to threaded IRQ handler (Manivannan Sadhasivam) - Move tegra194 dw_pcie_ep_linkup() to threaded IRQ handler (Manivannan Sadhasivam) - Add a separate lock for the endpoint pci_epf list to avoid deadlock while running callbacks (Manivannan Sadhasivam) - Use callbacks instead of notifier chains to signal events from EPC to EPF drivers (Manivannan Sadhasivam) - Use link_up() callback in place of LINK_UP notifier (Manivannan Sadhasivam) * pci/endpoint: PCI: endpoint: Use link_up() callback in place of LINK_UP notifier PCI: endpoint: Use callback mechanism for passing events from EPC to EPF PCI: endpoint: Use a separate lock for protecting epc->pci_epf list PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handler PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ
2023-02-22Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+2
- Avoid FLR for AMD FCH AHCI adapters to avoid a hardware defect (Damien Le Moal) - Add ACS quirk for Wangxun NICs that don't allow peer-to-peer between functions, but don't advertise an ACS Capability (Mengyuan Lou) * pci/virtualization: PCI: Add ACS quirk for Wangxun NICs PCI: Avoid FLR for AMD FCH AHCI adapters
2023-02-22Merge branch 'pci/pm'Bjorn Helgaas1-0/+1
- Account for _S0W when deciding whether to put bridges in D3 to avoid missing hotplug events (Rafael J. Wysocki) * pci/pm: PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3()
2023-02-22dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callersSerge Semin1-1/+1
When CONFIG_DW_EDMA=m, dw_edma_probe() is built as a module. Previously edma.h declared it as extern, but the implementation isn't available for builtin callers. A subsequent commit will add calls from dw_pcie_host_init() and dw_pcie_ep_init(), which can only be built-in. Make it safe for such builtin callers to call dw_edma_probe() by using IS_REACHABLE() to define a stub when CONFIG_DW_EDMA=m. When CONFIG_DW_EDMA=m, these builtin callers will fail to detect and register eDMA devices, so eDMA won't be usable even if the dw-edma module is loaded. [bhelgaas: split to separate patch, commit log] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Serge Semin <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Vinod Koul <[email protected]>
2023-02-22dmaengine: dw-edma: Add mem-mapped LL-entries supportSerge Semin1-1/+4
Currently the DW eDMA driver only supports the linked lists memory allocated locally with respect to the remote eDMA engine setup. It means the linked lists will be accessible by the CPU via the MMIO space only. If eDMA is embedded into the DW PCIe Root Ports or local Endpoints (which support will be added in subsequent commits) the linked lists are supposed to be allocated in the CPU memory. In that case the LL-entries can be directly accessed, while the former case implies using the MMIO accessors for that. In order to have both cases supported by the driver, the dw_edma_region descriptor should be fixed to contain the MMIO-backed and just memory-based virtual addresses. The linked lists initialization procedure will use one of them depending on the eDMA device nature. If the eDMA engine is embedded into the local DW PCIe Root Port/Endpoint controllers, the list entries will be directly accessed by referencing the corresponding structure fields. Otherwise the MMIO accessors usage will be preserved. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Serge Semin <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Vinod Koul <[email protected]>
2023-02-22Merge tag 'hwmon-for-v6.3' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Infineon TDA38640 Voltage Regulator - NXP MC34VR500 PMIC - GXP fan controller - MPQ7932 Power Management IC New chip or board support added to existing drivers: - it87: IT87952E; also other cleanup/improvements - intel-m10-bmc-hwmon: N6000 - pmbus/max16601: MAX16600 - aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer Poweradjust 3, Aquacomputer Aquaero - nct6775: Support for B650/B660/X670 ASUS boards - oxp-sensors: AYANEO AIR and AIR Pro Other notable changes: - Various kernel documentation fixes - Various devicetree bindings fixes - Explicitly deprecated [devm_]hwmon_device_register_with_groups - ftsteutates: Support for fanX_fault and other cleanup - ltc2945: Support for setting shunt resistor and other cleanup/fixes - coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify platform device handling ... and various other minor cleanups and fixes" * tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits) hwmon: Deprecate [devm_]hwmon_device_register_with_groups hwmon: (mlxreg-fan) Return zero speed for broken fan hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource() hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3 hwmon: (iio_hwmon) use dev_err_probe hwmon: intel-m10-bmc-hwmon: Add N6000 sensors Docs/hwmon/index: Add missing SPDX License Identifier hwmon: (it87) Updated documentation for recent updates to it87 hwmon: (it87) Add new chipset IT87952E hwmon: (it87) Allow multiple chip IDs for force_id hwmon: (it87) Add chip_id in some info message hwmon: (it87) List full chip model name hwmon: (it87) Disable configuration exit for certain chips hwmon: (it87) Allow disabling exiting of configuration mode Documentation: hwmon: correct spelling hwmon: (pmbus/max16601) Add support for MAX16600 hwmon: (ltc2945) Allow setting shunt resistor hwmon: (ltc2945) Handle error case in ltc2945_value_store hwmon: (ltc2945) Add devicetree match table ...
2023-02-22Merge tag 'for-linus-2023022201' of ↵Linus Torvalds3-23/+182
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - HID-BPF infrastructure: this allows to start using HID-BPF. Note that the mechanism to ship HID-BPF program through the kernel tree is still not implemented yet (but is planned). This should be a no-op for 99% of users. Also we are gaining kselftests for the HID tree (Benjamin Tissoires) - Some UAF fixes in workers when using uhid (Pietro Borrello & Benjamin Tissoires) - Constify hid_ll_driver (Thomas Weißschuh) - Allow more custom IIO sensors through HID (Philipp Jungkamp) - Logitech HID++ fixes for scroll wheel, protocol and debug (Bastien Nocera) - Some new device support: Steam Deck (Vicki Pfau), UClogic (José Expósito), Logitech G923 Xbox Edition steering wheel (Walt Holman), EVision keyboards (Philippe Valembois) - other assorted code cleanups and fixes * tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (99 commits) HID: mcp-2221: prevent UAF in delayed work hid: bigben_probe(): validate report count HID: asus: use spinlock to safely schedule workers HID: asus: use spinlock to protect concurrent accesses HID: bigben: use spinlock to safely schedule workers HID: bigben_worker() remove unneeded check on report_field HID: bigben: use spinlock to protect concurrent accesses HID: logitech-hidpp: Add myself to authors HID: logitech-hidpp: Retry commands when device is busy HID: logitech-hidpp: Add more debug statements HID: Add support for Logitech G923 Xbox Edition steering wheel HID: logitech-hidpp: Add Signature M650 HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk HID: logitech-hidpp: Don't restart communication if not necessary HID: logitech-hidpp: Add constants for HID++ 2.0 error codes Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures" HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support HID: i2c-hid: goodix: Add mainboard-vddio-supply dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply HID: i2c-hid: goodix: Stop tying the reset line to the regulator ...
2023-02-22Merge tag 'pinctrl-v6.3-1' of ↵Linus Torvalds3-12/+157
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Nothing special, notably a lot of new Qualcomm hardware is supported, a RISC-V reference SoC and then some cleanups both in code and device tree bindings. Core changes: - Add PINCTRL_PINFUNCTION() macro and use it in several drivers New drivers: - New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on) pin controllers. (RISC-V.) - New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller - New subdrivers for the Qualcomm SM8550 SoC and LPASS pin controllers - New subdriver for the Qualcomm SA8775P SoC pin controller - New subdriver for the Qualcomm IPQ5332 SoC pin controller - New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin control - New subdriver for the Mediatek MT7981 SoC pin controller Improvements: - Several cleanups and refactorings to the Intel drivers - Add 4KOhm bias support to the Intel driver - Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver - Support general purpose clocks in the Qualcomm MSM8226 SoC - Several conversions to use the new I2C .probe_new() call - Massive clean-up of the Qualcomm Device Tree YAML schemas - Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC driver" * tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits) pinctrl: qcom: Add support for i2c specific pull feature pinctrl: starfive: Add StarFive JH7110 aon controller driver pinctrl: starfive: Add StarFive JH7110 sys controller driver dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl pinctrl: add mt7981 pinctrl driver dt-bindings: pinctrl: add bindings for MT7981 SoC dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated pinctrl: qcom: Introduce IPQ5332 TLMM driver dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS pinctrl: at91: use devm_kasprintf() to avoid potential leaks dt-bindings: pinctrl: qcom: correct gpio-ranges in examples dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example ...
2023-02-22Merge tag 'gpio-updates-for-v6.3' of ↵Linus Torvalds6-231/+5
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "A rather small update, there are no new drivers, just improvements and refactoring in existing ones. Thanks to migrating of several drivers to using generalized APIs and dropping of OF interfaces in favor of using software nodes we're actually removing more code than we're adding. Core GPIOLIB: - drop several OF interfaces after moving a significant part of the code to using software nodes - remove more interfaces referring to the global GPIO numberspace that we're getting rid of - improvements in the gpio-regmap library - add helper for GPIO device reference counting - remove unused APIs - minor tweaks like sorting headers alphabetically Extended support in existing drivers: - add support for Tegra 234 PMC to gpio-tegra186 Driver improvements: - migrate the 104-dio/idi family of drivers to using the regmap-irq API - migrate gpio-i8255 and gpio-mm to the GPIO regmap API - clean-ups in gpio-pca953x - remove duplicate assignments of of_gpio_n_cells in gpio-davinci, gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x - improvements to gpio-pcf857x: implement get/set_multiple callbacks, use generic device properties instead of OF + minor tweaks - fix OF-related header includes and Kconfig dependencies in gpio-zevio - dynamically allocate the GPIO base in gpio-omap - use a dedicated printf specifier for printing fwnode info in gpio-sim - use dev_name() for the GPIO chip label in gpio-vf610 - other minor tweaks and fixes Documentation: - remove mentions of legacy API from comments in various places - convert the DT binding documents to YAML schema for Fujitsu MB86S7x, Unisoc GPIO and Unisoc EIC - document the Unisoc UMS512 controller in DT bindings" * tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits) gpio: sim: Use %pfwP specifier instead of calling fwnode API directly gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping() gpiolib: of: Move enum of_gpio_flags to its only user gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM gpio: zevio: Add missing header gpio: Get rid of gpio_to_chip() gpio: pcf857x: Drop unneeded explicit casting gpio: pcf857x: Make use of device properties gpio: pcf857x: Get rid of legacy platform data gpio: rockchip: Do not mention legacy API in the code gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells gpio: zevio: Use proper headers and drop OF_GPIO dependency gpio: zevio: Remove duplicate assignment of of_gpio_n_cells gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells dt-bindings: gpio: Add compatible string for Unisoc UMS512 dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml gpio: ge: Remove duplicate assignment of of_gpio_n_cells gpio: davinci: Remove duplicate assignment of of_gpio_n_cells gpio: omap: use dynamic allocation of base ...
2023-02-22Merge tag 'spi-v6.3' of ↵Linus Torvalds3-8/+29
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This has been a fairly quiet release for SPI, though it is likely that the next release will have some big changes as there's some preparatory work for multiple chip select support gone in - the rest of the code is on the list but will need to be rebased onto -rc1. Otherwise there's a couple of new tunables for chip select timings, some new devices and smaller device specific updates and fixes. - Support for configuring the hold and minimum inactive times for chip selects. - Beginnings of support for supporting devices which have multiple chip selects on a single device. - Support for newer Broadcom HSSPI and Intel controllers, Silicon Labs EM3581 and SI3210" * tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (67 commits) spi: dt-bindings: qcom,spi-qcom-qspi: document OPP and power-domains spi: spidev: drop the incorrect notice from Kconfig spi: bcm63xx-hsspi: fix error code in probe spi: bcmbca-hsspi: Fix error code in probe() function spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one() spi: intel: Check number of chip selects after reading the descriptor spi: xilinx: add force_irq for QSPI mode spi: spi-st-ssc: convert to DT schema spi: Reorder fields in 'struct spi_transfer' spi: cadence-quadspi: use STIG mode for small reads spi: cadence-quadspi: setup ADDR Bits in cmd reads spi: cadence-quadspi: Add flag for direct mode writes spi: cadence-quadspi: Reset CMD_CTRL Reg on cmd r/w completion MAINTAINERS: Remove file reference for Broadcom Broadband SoC HS SPI driver entry spi: bcm63xx-hsspi: bcmbca-hsspi: fix _be16 type usage MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers spi: bcmbca-hsspi: Add driver for newer HSSPI controller spi: bcm63xx-hsspi: Disable spi mem dual io read op support spi: spi-mem: Allow controller supporting mem_ops without exec_op spi: bcm63xx-hsspi: Add prepend mode support ...
2023-02-22Merge tag 'regmap-v6.3' of ↵Linus Torvalds1-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A quiet release for regmap: we've seen several cleanups, an update for a change in the MDIO APIs and one small fix" * tag 'regmap-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap-irq: Remove unused mask_invert flag regmap-irq: Remove unused type_invert flag regmap: Reorder fields in 'struct regmap_bus' to save some memory regmap: apply reg_base and reg_downshift for single register ops
2023-02-22Merge tag 'sound-6.3-rc1' of ↵Linus Torvalds19-526/+413
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The majority of works in this cycle are about ASoC spread over trees. Most of them are for new devices and cleanups / refactoring works, and not much significant changes are seen in the core side. Below are some highlights: ASoC: - Continued refactoring to move into common helper functions - Lots of DT schema conversons and stylistic nits - Continued work on building out the new SOF IPC4 scheme - Continued work for Intel AVS - New drivers for Awinc AT88395, Infineon PEB2466, Iron Device SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034, Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1 ALSA: - A few cleanups to make the remove callbacks to void returns - FireWire refactoring and enhancements - PCM kselftest enhancements" * tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits) ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks ASoC: soc-ac97: Return correct error codes ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared ASoC: cs35l45: Remove separate namespace for tables ASoC: cs35l45: Remove separate tables module ASoC: soc-ac97: Convert to agnostic GPIO API ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi" ALSA: hda: cs35l41: Enable Amp High Pass Filter ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded ALSA: hda: cs35l41: Correct error condition handling ASoC: codecs: wcd934x: Use min macro for comparison and assignment ASoC: Intel: Skylake: Fix struct definition ASoC: tlv320adcx140: extend list of supported samplerates ASoC: imx-pcm-rpmsg: Remove unused variable SoC: rt5682s: Disable jack detection interrupt during suspend ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3 ASoC: SOF: Intel: Enable d0i3 work for ipc4 ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version ASoC: SOF: Introduce a new set_pm_gate() IPC PM op ...
2023-02-22io_uring: rename 'in_idle' to 'in_cancel'Jens Axboe1-1/+1
This better describes what it does - it's incremented when the task is currently undergoing a cancelation operation, due to exiting or exec'ing. Signed-off-by: Jens Axboe <[email protected]>
2023-02-22clk: qcom: Revert sync_state based clk_disable_unusedBjorn Andersson1-1/+0
Revert the postponement of clk_disable_unused() for clock providers that implement sync_state, and the change to drivers implementing this, until agreement on the implementation has been reached. This reverts: 29e31415e14e ("clk: qcom: Remove need for clk_ignore_unused on sc8280xp") 99c0f7d35c4b ("clk: qcom: sdm845: Use generic clk_sync_state_disable_unused callback") 26b36df75166 ("clk: Add generic sync_state callback for disabling unused clocks") Requested-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]>
2023-02-22mfd: ntxec: Add version number for EC in Tolino VisionAndreas Kemnade1-1/+1
The EC firmware has a different version number than anything defined until now. Signed-off-by: Andreas Kemnade <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-22mfd: Remove toshiba tmio driversArnd Bergmann5-419/+0
Four separate mfd drivers are in the "tmio" family, and all of them were used in now-removed PXA machines (eseries, tosa, and hx4700), so the mfd drivers and all its children can be removed as well. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-22backlight: pwm_bl: Drop support for legacy PWM probingUwe Kleine-König1-1/+0
There is no in-tree user left which relies on legacy probing. So drop support for it which removes another user of the deprecated pwm_request() function. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-22Merge branch 'for-6.3/hid-bpf' into for-linusBenjamin Tissoires2-0/+175
Initial support of HID-BPF (Benjamin Tissoires) The history is a little long for this series, as it was intended to be sent for v6.2. However some last minute issues forced us to postpone it to v6.3. Conflicts: * drivers/hid/i2c-hid/Kconfig: commit bf7660dab30d ("HID: stop drivers from selecting CONFIG_HID") conflicts with commit 2afac81dd165 ("HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is") the resolution is simple enough: just drop the "default" and "select" lines as the new commit from Arnd is doing
2023-02-22Merge branch 'for-6.3/multitouch' into for-linusBenjamin Tissoires1-0/+1
Allow to pass quirks from i2c-hid to hid-multitouch (Allen Ballway & Dmitry Torokhov)
2023-02-22Merge branch 'for-6.3/hid-sensor' into for-linusBenjamin Tissoires1-0/+1
Allow more custom IIO sensors through HID (Philipp Jungkamp)
2023-02-22Merge branch 'for-6.3/hid-core' into for-linusBenjamin Tissoires1-23/+5
- constify hid_ll_driver (Thomas Weißschuh) - map standard Battery System Charging to upower (José Expósito) - couple of assorted fixes and new handling of HID usages (Jingyuan Liang & Ronald Tschalär)
2023-02-22mfd: core: Spelling s/compement/complement/Geert Uytterhoeven1-1/+1
Fix a misspelling of "complement". Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/aa7abd7103a0e4be954ea63de78f12e8251b2964.1673271092.git.geert+renesas@glider.be
2023-02-22mfd: twl: Fix TWL6032 phy vbus detectionAndreas Kemnade1-0/+2
TWL6032 has a few charging registers prepended before the charging registers the TWL6030 has. To be able to use common register defines declare the additional registers as additional module. At the moment this affects the access to CHARGERUSB_CTRL1 in phy-twl6030-usb. Without this patch, it is accessing the wrong register on TWL6032. The consequence is that presence of Vbus is not reported. Cc: Bin Liu <[email protected]> Cc: Tony Lindgren <[email protected]> Signed-off-by: Andreas Kemnade <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-22mfd: axp20x: Fix order of pek rise and fall eventsAren Moynihan1-5/+10
The power button can get "stuck" if the rising edge and falling edge irq are read in the same pass. This can often be triggered when resuming from suspend if the power button is released before the kernel handles the interrupt. Swapping the order of the rise and fall events makes sure that the press event is handled first, which prevents this situation. Signed-off-by: Aren Moynihan <[email protected]> Reviewed-by: Samuel Holland <[email protected]> Tested-by: Samuel Holland <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-22Merge tags 'ib-mfd-extcon-i2c-v6.3' and 'ib-mfd-fpga-hwmon-v6.3-1' into ↵Lee Jones1-38/+167
ibs-for-mfd-merged Immutable branch between MFD, Extcon and I2C due for the v6.3 merge window Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
2023-02-21scsi: core: Extend struct scsi_exec_argsBart Van Assche1-0/+1
Allow SCSI LLDs to specify SCMD_* flags. Link: https://lore.kernel.org/r/[email protected] Cc: Mike Christie <[email protected]> Cc: John Garry <[email protected]> Reviewed-by: John Garry <[email protected]> Signed-off-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-02-21scsi: mpi3mr: Replace 1-element array with flex-arrayKees Cook1-7/+1
Nothing else defined MPI3_NVME_ENCAP_CMD_MAX, so the "command" buffer was being defined as a fake flexible array of size 1. Replace this with a proper flex array. Avoids this GCC 13 warning under -fstrict-flex-arrays=3: In function 'fortify_memset_chk', inlined from 'mpi3mr_build_nvme_sgl' at ../drivers/scsi/mpi3mr/mpi3mr_app.c:693:2, inlined from 'mpi3mr_bsg_process_mpt_cmds.constprop' at ../drivers/scsi/mpi3mr/mpi3mr_app.c:1214:8: ../include/linux/fortify-string.h:430:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 430 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/[email protected] Cc: Sumit Saxena <[email protected]> Cc: Himanshu Madhani <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: Stephen Rothwell <[email protected]> Cc: kernel test robot <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-02-21Merge tag 'net-next-6.3' of ↵Linus Torvalds115-855/+3282
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-21Merge tag 'v6.3-p1' of ↵Linus Torvalds13-42/+38
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ...
2023-02-21Merge tag 'platform-drivers-x86-v6.3-1' of ↵Linus Torvalds8-73/+149
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD PMC: Improvements to aid s2idle debugging - Dell WMI-DDV: hwmon support - INT3472 camera sensor power-management: Improve privacy LED support - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support - Mellanox: SN5600 and Nvidia L1 switch support - Microsoft Surface Support: Various cleanups + code improvements - tools/intel-speed-select: Various improvements - Miscellaneous other cleanups / fixes * tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits) platform/x86: nvidia-wmi-ec-backlight: Add force module parameter platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY platform/x86: dell-ddv: Prefer asynchronous probing platform/x86: dell-ddv: Add hwmon support Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform: mellanox: mlx-platform: Move bus shift assignment out of the loop platform: mellanox: mlx-platform: Add mux selection register to regmap platform_data/mlxreg: Add field with mapped resource address platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration platform: mellanox: Extend all systems with I2C notification callback platform: mellanox: Split logic in init and exit flow platform: mellanox: Split initialization procedure platform: mellanox: Introduce support of new Nvidia L1 switch platform: mellanox: Introduce support for next-generation 800GB/s switch platform: mellanox: Cosmetic changes - rename to more common name platform: mellanox: Change "reset_pwr_converter_fail" attribute platform: mellanox: Introduce support for rack manager switch MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi x86/platform/uv: Make kobj_type structure constant platform/x86: think-lmi: Make kobj_type structure constant ...
2023-02-21Merge tag 'tag-chrome-platform-for-v6.3' of ↵Linus Torvalds2-6/+87
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "New drivers: - cros_ec_uart for ChromeOS EC protocol over UART - cros_typec_vdm for USB PD Vendor Defined Message Improvements: - Preserve logs as much as possible when EC panics - Shutdown to refrain from potential HW damages when EC panics Fixes: - Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE - Fix a lockdep false positive Cleanups: - Use sysfs_emit*() instead of scnprintf() - Use asm instead of asm-generic for unaligned.h Misc: - Rename module name from cros_ec_typec to cros-ec-typec - Minor fixes" * tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits) platform/chrome: cros_ec_typec: Fix spelling mistake platform/chrome: cros_typec_vdm: Add Attention support platform/chrome: cros_ec: Add VDM attention headers platform/chrome: cros_typec_vdm: Fix VDO copy platform/chrome: cros_ec_typec: allow deferred probe of switch handles platform/chrome: cros_ec_proto: remove big stub objects from stack platform/chrome: cros_ec_uart: fix negative type promoted to high platform/chrome: cros_ec: Use per-device lockdep key platform/chrome: fix kernel-doc warnings for cros_ec_command platform/chrome: fix kernel-doc warning for last_resume_result platform/chrome: fix kernel-doc warning for suspend_timeout_ms platform/chrome: fix kernel-doc warnings for panic notifier platform/chrome: cros_ec_lpc: initialize the buf variable platform/chrome: cros_ec: Fix panic notifier registration platform/chrome: cros_typec_switch: Check for retimer flag platform/chrome: cros_typec_switch: Use fwnode* prop check platform/chrome: cros_typec_vdm: Add VDM send support platform/chrome: cros_typec_vdm: Add VDM reply support platform/chrome: cros_ec_typec: Add initial VDM support platform/chrome: cros_ec_typec: Alter module name with hyphens ...
2023-02-21Merge tag 'for-linus-6.3-rc1-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - help deprecate the /proc/xen files by making the related information available via sysfs - mark the Xen variants of play_dead "noreturn" - support a shared Xen platform interrupt - several small cleanups and fixes * tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: sysfs: make kobj_type structure constant x86/Xen: drop leftover VM-assist uses xen: Replace one-element array with flexible-array member xen/grant-dma-iommu: Implement a dummy probe_device() callback xen/pvcalls-back: fix permanently masked event channel xen: Allow platform PCI interrupt to be shared x86/xen/time: prefer tsc as clocksource when it is invariant x86/xen: mark xen_pv_play_dead() as __noreturn x86/xen: don't let xen_pv_play_dead() return drivers/xen/hypervisor: Expose Xen SIF flags to userspace
2023-02-21Merge tag 'hyperv-next-signed-20230220' of ↵Linus Torvalds3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - allow Linux to run as the nested root partition for Microsoft Hypervisor (Jinank Jain and Nuno Das Neves) - clean up the return type of callback functions (Dawei Li) * tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Fix hv_get/set_register for nested bringup Drivers: hv: Make remove callback of hyperv driver void returned Drivers: hv: Enable vmbus driver for nested root partition x86/hyperv: Add an interface to do nested hypercalls Drivers: hv: Setup synic registers in case of nested root partition x86/hyperv: Add support for detecting nested hypervisor
2023-02-22netfilter: ctnetlink: make event listener tracking globalFlorian Westphal2-1/+5
pernet tracking doesn't work correctly because other netns might have set NETLINK_LISTEN_ALL_NSID on its event socket. In this case its expected that events originating in other net namespaces are also received. Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID requires much more intrusive changes both in netlink and nfnetlink, f.e. adding a 'setsockopt' callback that lets nfnetlink know that the event socket entered (or left) ALL_NSID mode. Move to global tracking instead: if there is an event socket anywhere on the system, all net namespaces which have conntrack enabled and use autobind mode will allocate the ecache extension. netlink_has_listeners() returns false only if the given group has no subscribers in any net namespace, the 'net' argument passed to nfnetlink_has_listeners is only used to derive the protocol (nfnetlink), it has no other effect. For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event listeners a new netlink_has_net_listeners() is also needed. Fixes: 90d1daa45849 ("netfilter: conntrack: add nf_conntrack_events autodetect mode") Reported-by: Bryce Kahle <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2023-02-22bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC supportSouradeep Chowdhury1-1/+1
The Data Capture and Compare(DCC) is a debugging tool that uses the bootconfig for configuring the register values during boot-time. Increase the max nodes supported by bootconfig to cater to the requirements of the Data Capture and Compare Driver. Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Souradeep Chowdhury <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2023-02-21Merge tag 'arm64-upstream' of ↵Linus Torvalds5-10/+45
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ...
2023-02-21scsi: ufs: core: Initialize devfreq synchronouslyAdrien Thierry1-0/+1
During UFS initialization, devfreq initialization is asynchronous: ufshcd_async_scan() calls ufshcd_add_lus(), which in turn initializes devfreq for UFS. The simple ondemand governor is then loaded. If it is built as a module, request_module() is called and throws a warning: WARNING: CPU: 7 PID: 167 at kernel/kmod.c:136 __request_module+0x1e0/0x460 Modules linked in: crct10dif_ce llcc_qcom phy_qcom_qmp_usb ufs_qcom phy_qcom_snps_femto_v2 ufshcd_pltfrm phy_qcom_qmp_combo ufshcd_core phy_qcom_qmp_ufs qcom_wdt socinfo fuse ipv6 CPU: 7 PID: 167 Comm: kworker/u16:3 Not tainted 6.2.0-rc6-00009-g58706f7fb045 #1 Hardware name: Qualcomm SA8540P Ride (DT) Workqueue: events_unbound async_run_entry_fn pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __request_module+0x1e0/0x460 lr : __request_module+0x1d8/0x460 sp : ffff800009323b90 x29: ffff800009323b90 x28: 0000000000000000 x27: 0000000000000000 x26: ffff800009323d50 x25: ffff7b9045f57810 x24: ffff7b9045f57830 x23: ffffdc5a83e426e8 x22: ffffdc5ae80a9818 x21: 0000000000000001 x20: ffffdc5ae7502f98 x19: ffff7b9045f57800 x18: ffffffffffffffff x17: 312f716572667665 x16: 642f7366752e3030 x15: 0000000000000000 x14: 000000000000021c x13: 0000000000005400 x12: ffff7b9042ed7614 x11: ffff7b9042ed7600 x10: 00000000636c0890 x9 : 0000000000000038 x8 : ffff7b9045f2c880 x7 : ffff7b9045f57c68 x6 : 0000000000000080 x5 : 0000000000000000 x4 : 8000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffffdc5ae5d382f0 x0 : 0000000000000001 Call trace: __request_module+0x1e0/0x460 try_then_request_governor+0x7c/0x100 devfreq_add_device+0x4b0/0x5fc ufshcd_async_scan+0x1d4/0x310 [ufshcd_core] async_run_entry_fn+0x34/0xe0 process_one_work+0x1d0/0x320 worker_thread+0x14c/0x444 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 This occurs because synchronous module loading from async is not allowed. According to __request_module(): /* * We don't allow synchronous module loading from async. Module * init may invoke async_synchronize_full() which will end up * waiting for this task which already is waiting for the module * loading to complete, leading to a deadlock. */ Such a deadlock was experienced on the Qualcomm QDrive3/sa8540p-ride. With DEVFREQ_GOV_SIMPLE_ONDEMAND=m, the boot hangs after the warning. Fix both the warning and the deadlock by moving devfreq initialization out of the async routine. Tested on the sa8540p-ride by using fio to put the UFS under load, and printing the trace generated by /sys/kernel/tracing/events/ufs/ufshcd_clk_scaling events. The trace looks similar with and without the change. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Adrien Thierry <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-02-21scsi: scsi_transport_fc: Add an additional flag to fc_host_fpin_rcv()Muneendra1-1/+3
The LLDD and the stack currently process FPINs received from the fabric, but the stack is not aware of any action taken by the driver to alleviate congestion. The current interface between the driver and the SCSI stack is limited to passing the notification mainly for statistics and heuristics. The reaction to an FPIN could be handled either by the driver or by the stack (marginal path and failover). Amend the interface to indicate if action on an FPIN has already been reacted to by the LLDDs or not. Add an additional flag to fc_host_fpin_rcv() to indicate if the FPIN has been acknowledged/reacted to by the driver. Also added a new event code FCH_EVT_LINK_FPIN_ACK to notify to the user that the event has been acknowledged/reacted by the LLDD driver Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Anil Gurumurthy <[email protected]> Signed-off-by: Anil Gurumurthy <[email protected]> Co-developed-by: Nilesh Javali <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Muneendra <[email protected]> Reviewed-by: James Smart <[email protected]> Reviewed-by: Himanshu Madhani <[email protected]> Reviewed-by: Ewan D. Milne <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-02-21uaccess: Add speculation barrier to copy_from_user()Dave Hansen1-0/+4
The results of "access_ok()" can be mis-speculated. The result is that you can end speculatively: if (access_ok(from, size)) // Right here even for bad from/size combinations. On first glance, it would be ideal to just add a speculation barrier to "access_ok()" so that its results can never be mis-speculated. But there are lots of system calls just doing access_ok() via "copy_to_user()" and friends (example: fstat() and friends). Those are generally not problematic because they do not _consume_ data from userspace other than the pointer. They are also very quick and common system calls that should not be needlessly slowed down. "copy_from_user()" on the other hand uses a user-controller pointer and is frequently followed up with code that might affect caches. Take something like this: if (!copy_from_user(&kernelvar, uptr, size)) do_something_with(kernelvar); If userspace passes in an evil 'uptr' that *actually* points to a kernel addresses, and then do_something_with() has cache (or other) side-effects, it could allow userspace to infer kernel data values. Add a barrier to the common copy_from_user() code to prevent mis-speculated values which happen after the copy. Also add a stub for architectures that do not define barrier_nospec(). This makes the macro usable in generic code. Since the barrier is now usable in generic code, the x86 #ifdef in the BPF code can also go away. Reported-by: Jordy Zomer <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Acked-by: Daniel Borkmann <[email protected]> # BPF bits Signed-off-by: Linus Torvalds <[email protected]>
2023-02-21Merge tag 'thermal-6.3-rc1' of ↵Linus Torvalds4-0/+59
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "The majority of changes here are related to the general switch-over to using arrays of generic trip point structures registered along with a thermal zone instead of trip point callbacks (this has been done mostly by Daniel Lezcano with some help from yours truly on the Intel drivers front). Apart from that and the related reorganization of code, there are some enhancements of the existing driver and a new Mediatek Low Voltage Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major rework so it will use the generic idle_inject facility for CPU idle time injection going forward and it will take additional module parameters for specifying the subset of CPUs to be affected by it (work done by Srinivas Pandruvada). Also included are assorted fixes and a whole bunch of cleanups. Specifics: - Rework a large bunch of drivers to use the generic thermal trip structure and use the opportunity to do more cleanups by removing unused functions from the OF code (Daniel Lezcano) - Remove core header inclusion from drivers (Daniel Lezcano) - Fix some locking issues related to the generic thermal trip rework (Johan Hovold) - Fix a crash when requesting the critical temperature on tegra, which is related to the generic trip point work (Jon Hunter) - Clean up thermal device unregistration code (Viresh Kumar) - Fix and clean up thermal control core initialization error code paths (Daniel Lezcano) - Relocate the trip points handling code into a separate file (Daniel Lezcano) - Make the thermal core fail registration of thermal zones and cooling devices if the thermal class has not been registered (Rafael Wysocki) - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano) - Make the core thermal control code use sysfs_emit_at() instead of scnprintf() where applicable (ye xingchen) - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui) - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui) - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li) - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang) - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen) - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann) - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano) - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada) - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki) - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano) - Clean up and improve the int340x thermal driver (Rafael Wysocki) - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki) - Fix the Intel powerclamp thermal driver and make it use the common idle injection framework (Srinivas Pandruvada) - Add two module parameters, cpumask and max_idle, to the Intel powerclamp thermal driver to allow it to affect only a specific subset of CPUs instead of all of them (Srinivas Pandruvada) - Make the Intel quark_dts thermal driver Use generic trip point objects instead of its own trip point representation (Daniel Lezcano) - Add toctree entry for thermal documents and fix two issues in the Intel powerclamp driver documentation (Bagas Sanjaya) - Use strscpy() to instead of strncpy() in the thermal core (Xu Panda) - Fix thermal_sampling_exit() (Vincent Guittot) - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi) - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert Uytterhoeven) - Fix useless call to set_trips() when resuming in the rcar_gen3 thermal control driver and add interrupt support detection at init time to it (Niklas Söderlund) - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu) - Fix include path for libnl3 in pkg-config file for libthermal (Vibhav Pant) - Remove syscfg-based driver for st as the platform is not supported any more (Alain Volmat)" * tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits) thermal/drivers/st: Remove syscfg based driver thermal: Remove core header inclusion from drivers tools/lib/thermal: Fix include path for libnl3 in pkg-config file. thermal/drivers/hisi: Drop second sensor hi3660 thermal/drivers/rcar_gen3_thermal: Fix device initialization thermal/drivers/rcar_gen3_thermal: Create device local ops struct thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming thermal/drivers/rcar_gen3: Add support for R-Car V4H dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver dt-bindings: thermal: mediatek: Add LVTS thermal controllers thermal/drivers/mediatek: Relocate driver to mediatek folder tools/lib/thermal: Fix thermal_sampling_exit() Documentation: powerclamp: Fix numbered lists formatting Documentation: powerclamp: Escape wildcard in cpumask description Documentation: admin-guide: Add toctree entry for thermal docs thermal: intel: powerclamp: Add two module parameters Documentation: admin-guide: Move intel_powerclamp documentation thermal: core: Use sysfs_emit_at() instead of scnprintf() thermal: intel: powerclamp: Fix duration module parameter ...
2023-02-21Merge tag 'acpi-6.3-rc1' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These fix a frequency limit issue in the ACPI processor performance library code, fix a few issues in the ACPICA code, improve Crystal Cove support in the ACPI PMIC driver, fix string handling in the ACPI battery driver, add IRQ override quirks for a few machines more, fix other assorted problems and clean up code and documentation. Specifics: - Drop port I/O validation for some regions to avoid AML failures due to rejections of legitimate port I/O writes (Mario Limonciello) - Constify acpi_get_handle() pathname argument to allow its callers to pass const pathnames to it (Sakari Ailus) - Prevent acpi_ns_simple_repair() from crashing in some cases when AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin) - Fix typo in CDAT DSMAS struct definition (Lukas Wunner) - Drop an unnecessary (void *) conversion from the ACPI processor driver (Zhou jie) - Modify the ACPI processor performance library code to use the "no limit" frequency QoS as appropriate and adjust the intel_pstate driver accordingly (Rafael Wysocki) - Add support for NBFT to the ACPI table parser (Stuart Hayes) - Introduce list of known non-PNP devices to avoid enumerating some of them as PNP devices (Rafael Wysocki) - Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts to report the actual maintainers information (Rafael Wysocki) - Add two more entries to the ACPI IRQ override quirk list (Adam Niederer, Werner Sembach) - Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede) - Add comments with DSDT power OpRegion field names to the ACPI PMIC driver (Hans de Goede) - Fix string termination handling in the ACPI battery driver (Armin Wolf) - Limit error type to 32-bit width in the ACPI APEI error injection code (Shuai Xue) - Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans de Goede) - Silence missing prototype warnings in some places in the ACPI-related code (Ammar Faizi) - Make kobj_type structures used in the ACPI code constant (Thomas Weißschuh) - Correct spelling in firmware-guide/ACPI (Randy Dunlap) - Clarify the meaning of Explicit and Implicit in the _DSD GPIO properties documentation (Andy Shevchenko) - Fix some kernel-doc comments in the ACPI CPPC library code (Yang Li)" * tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) ACPI: make kobj_type structures constant Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit ACPICA: Fix typo in CDAT DSMAS struct definition ACPI: resource: Do IRQ override on all TongFang GMxRGxx ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models ACPI: CPPC: Fix some kernel-doc comments ACPI: video: Fix Lenovo Ideapad Z570 DMI match Documentation: firmware-guide/ACPI: correct spelling ACPI: PMIC: Add comments with DSDT power opregion field names ACPI: battery: Increase maximum string length ACPI: battery: Fix buffer overread if not NUL-terminated ACPI: APEI: EINJ: Limit error type to 32-bit width MAINTAINERS: Add x86 ACPI paths to the ACPI entry ACPI: battery: Fix missing NUL-termination with large strings ACPI: PNP: Introduce list of known non-PNP devices ACPICA: nsrepair: handle cases without a return value correctly ACPI: Silence missing prototype warnings cpufreq: intel_pstate: Drop ACPI _PSS states table patching ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily ACPI: processor: perflib: Use the "no limit" frequency QoS ...
2023-02-21Merge tag 'pm-6.3-rc1' of ↵Linus Torvalds4-1/+49
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ...
2023-02-21Merge tag 'hardening-v6.3-rc1' of ↵Linus Torvalds5-1/+26
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "Beyond some specific LoadPin, UBSAN, and fortify features, there are other fixes scattered around in various subsystems where maintainers were okay with me carrying them in my tree or were non-responsive but the patches were reviewed by others: - Replace 0-length and 1-element arrays with flexible arrays in various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees Cook) - randstruct: Disable Clang 15 support (Eric Biggers) - GCC plugins: Drop -std=gnu++11 flag (Sam James) - strpbrk(): Refactor to use strchr() (Andy Shevchenko) - LoadPin LSM: Allow root filesystem switching when non-enforcing - fortify: Use dynamic object size hints when available - ext4: Fix CFI function prototype mismatch - Nouveau: Fix DP buffer size arguments - hisilicon: Wipe entire crypto DMA pool on error - coda: Fully allocate sig_inputArgs - UBSAN: Improve arm64 trap code reporting - copy_struct_from_user(): Add minimum bounds check on kernel buffer size" * tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randstruct: disable Clang 15 support uaccess: Add minimum bounds check on kernel buffer size arm64: Support Clang UBSAN trap codes for better reporting coda: Avoid partial allocation of sig_inputArgs gcc-plugins: drop -std=gnu++11 to fix GCC 13 build lib/string: Use strchr() in strpbrk() crypto: hisilicon: Wipe entire pool on error net/i40e: Replace 0-length array with flexible array io_uring: Replace 0-length array with flexible array ext4: Fix function prototype mismatch for ext4_feat_ktype i915/gvt: Replace one-element array with flexible-array member drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size LoadPin: Allow filesystem switch when not enforcing LoadPin: Move pin reporting cleanly out of locking LoadPin: Refactor sysctl initialization LoadPin: Refactor read-only check into a helper ARM: ixp4xx: Replace 0-length arrays with flexible arrays fortify: Use __builtin_dynamic_object_size() when available rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
2023-02-21Merge tag 'rcu.2023.02.10a' of ↵Linus Torvalds7-14/+82
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes, perhaps most notably: - Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks - Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized - Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have done this for many years) - Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases) - Make kfree_rcu() and friends take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark This also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh) - SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture This also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another - Clean up the now-useless SRCU Kconfig option There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window - RCU-tasks updates, perhaps most notably these fixes: - A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang - A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period - A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU - Torture-test updates and fixes - Torture-test scripting updates and fixes - Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings * tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits) rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep() kernel/notifier: Remove CONFIG_SRCU init: Remove "select SRCU" fs/quota: Remove "select SRCU" fs/notify: Remove "select SRCU" fs/btrfs: Remove "select SRCU" fs: Remove CONFIG_SRCU drivers/pci/controller: Remove "select SRCU" drivers/net: Remove "select SRCU" drivers/md: Remove "select SRCU" drivers/hwtracing/stm: Remove "select SRCU" drivers/dax: Remove "select SRCU" drivers/base: Remove CONFIG_SRCU rcu: Disable laziness if lazy-tracking says so rcu: Track laziness during boot and suspend rcu: Remove redundant call to rcu_boost_kthread_setaffinity() rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts rcu: Align the output of RCU CPU stall warning messages rcu: Add RCU stall diagnosis information sched: Add helper nr_context_switches_cpu() ...
2023-02-21Merge tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-0/+1
Pull workqueue updates from Tejun Heo: - When per-cpu workqueue workers expire after sitting idle for too long, they used to wake up to the CPU that they're bound to in order to exit. This unfortunately could cause unwanted disturbances on CPUs isolated for e.g. RT applications. The worker exit path is restructured so that an existing worker is unbound from its CPU before being woken up for the last time, allowing it to migrate away from an isolated CPU for exiting. - A couple debug improvements. Watchdog dump is made more compact and workqueue now warns if used-after-free during the RCU grace period after destroy_workqueue(). * tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fold rebind_worker() within rebind_workers() workqueue: Unbind kworkers before sending them to exit() workqueue: Don't hold any lock while rcuwait'ing for !POOL_MANAGER_ACTIVE workqueue: Convert the idle_timer to a timer + work_struct workqueue: Factorize unbind/rebind_workers() logic workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex workqueue: Make show_pwq() use run-length encoding workqueue: Add a new flag to spot the potential UAF error
2023-02-21Merge tag 'irq-core-2023-02-20' of ↵Linus Torvalds3-2/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Move the interrupt affinity spreading mechanism into lib/group_cpus so it can be used for similar spreading requirements, e.g. in the block multi-queue code This also contains a first usecase in the block multi-queue code which Jens asked to take along with the librarization - Improve irqdomain locking to close a number race conditions which can be observed with massive parallel device driver probing - Enforce and document the semantics of disable_irq() which cannot be invoked safely from non-sleepable context - Move the IPI multiplexing code from the Apple AIC driver into the core, so it can be reused by RISCV Drivers: - Plug OF node refcounting leaks in various drivers - Correctly mark level triggered interrupts in the Broadcom L2 drivers - The usual small fixes and improvements - No new drivers for the record!" * tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts irqdomain: Switch to per-domain locking irqchip/mvebu-odmi: Use irq_domain_create_hierarchy() irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy() irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy() irqchip/gic-v3-its: Use irq_domain_create_hierarchy() irqchip/gic-v2m: Use irq_domain_create_hierarchy() irqchip/alpine-msi: Use irq_domain_add_hierarchy() x86/uv: Use irq_domain_create_hierarchy() x86/ioapic: Use irq_domain_create_hierarchy() irqdomain: Clean up irq_domain_push/pop_irq() irqdomain: Drop leftover brackets irqdomain: Drop dead domain-name assignment irqdomain: Drop revmap mutex irqdomain: Fix domain registration race irqdomain: Fix mapping-creation race irqdomain: Refactor __irq_domain_alloc_irqs() irqdomain: Look for existing mapping only once irqdomain: Drop bogus fwspec-mapping error handling ...
2023-02-21Merge tag 'timers-core-2023-02-20' of ↵Linus Torvalds2-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Updates for timekeeping, timers and clockevent/source drivers: Core: - Yet another round of improvements to make the clocksource watchdog more robust: - Relax the clocksource-watchdog skew criteria to match the NTP criteria. - Temporarily skip the watchdog when high memory latencies are detected which can lead to false-positives. - Provide an option to enable TSC skew detection even on systems where TSC is marked as reliable. Sigh! - Initialize the restart block in the nanosleep syscalls to be directed to the no restart function instead of doing a partial setup on entry. This prevents an erroneous restart_syscall() invocation from corrupting user space data. While such a situation is clearly a user space bug, preventing this is a correctness issue and caters to the least suprise principle. - Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout() to align it with the nanosleep semantics. Drivers: - The obligatory new driver bindings for Mediatek, Rockchip and RISC-V variants. - Add support for the C3STOP misfeature to the RISC-V timer to handle the case where the timer stops in deeper idle state. - Set up a static key in the RISC-V timer correctly before first use. - The usual small improvements and fixes all over the place" * tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ clocksource/drivers/em_sti: Mark driver as non-removable clocksource/drivers/sh_tmu: Mark driver as non-removable clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use clocksource/drivers/timer-microchip-pit64b: Add delay timer clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx dt-bindings: timer: mediatek,mtk-timer: add MT8365 clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback clocksource/drivers/sh_cmt: Mark driver as non-removable clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST clocksource/drivers/riscv: Increase the clock source rating clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT dt-bindings: timer: Add bindings for the RISC-V timer device RISC-V: time: initialize hrtimer based broadcast clock event device dt-bindings: timer: rk-timer: Add rktimer for rv1126 time/debug: Fix memory leak with using debugfs_lookup() clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime() clocksource: Verify HPET and PMTMR when TSC unverified ...
2023-02-21page_pool: add a comment explaining the fragment counter usageIlias Apalodimas1-0/+10
When reading the page_pool code the first impression is that keeping two separate counters, one being the page refcnt and the other being fragment pp_frag_count, is counter-intuitive. However without that fragment counter we don't know when to reliably destroy or sync the outstanding DMA mappings. So let's add a comment explaining this part. Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-21Merge tag 'x86_cache_for_v6.3_rc1' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 resource control updates from Borislav Petkov: - Add support for a new AMD feature called slow memory bandwidth allocation. Its goal is to control resource allocation in external slow memory which is connected to the machine like for example through CXL devices, accelerators etc * tag 'x86_cache_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Fix a silly -Wunused-but-set-variable warning Documentation/x86: Update resctrl.rst for new features x86/resctrl: Add interface to write mbm_local_bytes_config x86/resctrl: Add interface to write mbm_total_bytes_config x86/resctrl: Add interface to read mbm_local_bytes_config x86/resctrl: Add interface to read mbm_total_bytes_config x86/resctrl: Support monitor configuration x86/resctrl: Add __init attribute to rdt_get_mon_l3_config() x86/resctrl: Detect and configure Slow Memory Bandwidth Allocation x86/resctrl: Include new features in command line options x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag x86/resctrl: Add a new resource type RDT_RESOURCE_SMBA x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag x86/resctrl: Replace smp_call_function_many() with on_each_cpu_mask()
2023-02-21block: remove more NULL checks after bdev_get_queue()Juhyung Park1-6/+1
bdev_get_queue() never returns NULL. Several commits [1][2] have been made before to remove such superfluous checks, but some still remained. For places where bdev_get_queue() is called solely for NULL checks, it is removed entirely. [1] commit ec9fd2a13d74 ("blk-lib: don't check bdev_get_queue() NULL check") [2] commit fea127b36c93 ("block: remove superfluous check for request queue in bdev_is_zoned()") Signed-off-by: Juhyung Park <[email protected]> Reviewed-by: Pankaj Raghav <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.