aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2011-05-28Merge branch 'next' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (33 commits) x86: poll waiting for I/OAT DMA channel status maintainers: add dma engine tree details dmaengine: add TODO items for future work on dma drivers dmaengine: Add API documentation for slave dma usage dmaengine/dw_dmac: Update maintainer-ship dmaengine: move link order dmaengine/dw_dmac: implement pause and resume in dwc_control dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called dmaengine: at_hdmac: pause: no need to wait for FIFO empty pch_dma: modify pci device table definition pch_dma: Support new device ML7223 IOH pch_dma: Support I2S for ML7213 IOH pch_dma: Fix DMA setting issue pch_dma: modify for checkpatch pch_dma: fix dma direction issue for ML7213 IOH video-in dmaengine: at_hdmac: use descriptor chaining help function dmaengine: at_hdmac: implement pause and resume in atc_control ... Fix up trivial conflict in drivers/dma/dw_dmac.c
2011-05-28Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-9/+9
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/pch_gpio: Support new device ML7223 gpio: make gpio_{request,free}_array gpio array parameter const GPIO: OMAP: move to drivers/gpio GPIO: OMAP: move register offset defines into <plat/gpio.h> gpio: Convert gpio_is_valid to return bool gpio: Move the s5pc100 GPIO to drivers/gpio gpio: Move the s5pv210 GPIO to drivers/gpio gpio: Move the exynos4 GPIO to drivers/gpio gpio: Move to Samsung common GPIO library to drivers/gpio gpio/nomadik: add function to read GPIO pull down status gpio/nomadik: show all pins in debug gpio: move Nomadik GPIO driver to drivers/gpio gpio: move U300 GPIO driver to drivers/gpio langwell_gpio: add runtime pm support gpio/pca953x: Add support for pca9574 and pca9575 devices gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535
2011-05-28Merge branch 'setns'Linus Torvalds1-1/+3
* setns: ns: Wire up the setns system call Done as a merge to make it easier to fix up conflicts in arm due to addition of sendmmsg system call
2011-05-28ns: Wire up the setns system callEric W. Biederman1-1/+3
32bit and 64bit on x86 are tested and working. The rest I have looked at closely and I can't find any problems. setns is an easy system call to wire up. It just takes two ints so I don't expect any weird architecture porting problems. While doing this I have noticed that we have some architectures that are very slow to get new system calls. cris seems to be the slowest where the last system calls wired up were preadv and pwritev. avr32 is weird in that recvmmsg was wired up but never declared in unistd.h. frv is behind with perf_event_open being the last syscall wired up. On h8300 the last system call wired up was epoll_wait. On m32r the last system call wired up was fallocate. mn10300 has recvmmsg as the last system call wired up. The rest seem to at least have syncfs wired up which was new in the 2.6.39. v2: Most of the architecture support added by Daniel Lezcano <[email protected]> v3: ported to v2.6.36-rc4 by: Eric W. Biederman <[email protected]> v4: Moved wiring up of the system call to another patch v5: ported to v2.6.39-rc6 v6: rebased onto parisc-next and net-next to avoid syscall conflicts. v7: ported to Linus's latest post 2.6.39 tree. >  arch/blackfin/include/asm/unistd.h     |    3 ++- >  arch/blackfin/mach-common/entry.S      |    1 + Acked-by: Mike Frysinger <[email protected]> Oh - ia64 wiring looks good. Acked-by: Tony Luck <[email protected]> Signed-off-by: Eric W. Biederman <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-28Cache xattr security drop check for write v2Andi Kleen1-0/+13
Some recent benchmarking on btrfs showed that a major scaling bottleneck on large systems on btrfs is currently the xattr lookup on every write. Why xattr lookup on every write I hear you ask? write wants to drop suid and security related xattrs that could set o capabilities for executables. To do that it currently looks up security.capability on EVERY write (even for non executables) to decide whether to drop it or not. In btrfs this causes an additional tree walk, hitting some per file system locks and quite bad scalability. In a simple read workload on a 8S system I saw over 90% CPU time in spinlocks related to that. Chris Mason tells me this is also a problem in ext4, where it hits the global mbcache lock. This patch adds a simple per inode to avoid this problem. We only do the lookup once per file and then if there is no xattr cache the decision. All xattr changes clear the flag. I also used the same flag to avoid the suid check, although that one is pretty cheap. A file system can also set this flag when it creates the inode, if it has a cheap way to do so. This is done for some common file systems in followon patches. With this patch a major part of the lock contention disappears for btrfs. Some testing on smaller systems didn't show significant performance changes, but at least it helps the larger systems and is generally more efficient. v2: Rename is_sgid. add file system helper. Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Serge E. Hallyn <[email protected]> Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Al Viro <[email protected]>
2011-05-28atomic: Add atomic_or()Paul E. McKenney1-0/+13
An atomic_or() function is needed by TREE_RCU to avoid deadlock, so add a generic version. Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-05-28cpuset: Fix cpuset_cpus_allowed_fallback(), don't update tsk->rt.nr_cpus_allowedKOSAKI Motohiro2-1/+8
The rule is, we have to update tsk->rt.nr_cpus_allowed if we change tsk->cpus_allowed. Otherwise RT scheduler may confuse. Signed-off-by: KOSAKI Motohiro <[email protected]> Cc: Oleg Nesterov <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-05-27Merge git://git.infradead.org/mtd-2.6Linus Torvalds4-24/+17
* git://git.infradead.org/mtd-2.6: (97 commits) mtd: kill CONFIG_MTD_PARTITIONS mtd: remove add_mtd_partitions, add_mtd_device and friends mtd: convert remaining users to mtd_device_register() mtd: samsung onenand: convert to mtd_device_register() mtd: omap2 onenand: convert to mtd_device_register() mtd: txx9ndfmc: convert to mtd_device_register() mtd: tmio_nand: convert to mtd_device_register() mtd: socrates_nand: convert to mtd_device_register() mtd: sharpsl: convert to mtd_device_register() mtd: s3c2410 nand: convert to mtd_device_register() mtd: ppchameleonevb: convert to mtd_device_register() mtd: orion_nand: convert to mtd_device_register() mtd: omap2: convert to mtd_device_register() mtd: nomadik_nand: convert to mtd_device_register() mtd: ndfc: convert to mtd_device_register() mtd: mxc_nand: convert to mtd_device_register() mtd: mpc5121_nfc: convert to mtd_device_register() mtd: jz4740_nand: convert to mtd_device_register() mtd: h1910: convert to mtd_device_register() mtd: fsmc_nand: convert to mtd_device_register() ... Fixed up trivial conflicts in - drivers/mtd/maps/integrator-flash.c: removed in ARM tree - drivers/mtd/maps/physmap.c: addition of afs partition probe type clashing with removal of CONFIG_MTD_PARTITIONS
2011-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds5-1/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits) [SCSI] lpfc 8.3.24: Extend BSG infrastructure and add link diagnostics [SCSI] lpfc 8.3.24: Add resource extent support [SCSI] lpfc 8.3.24: Add request-firmware support [SCSI] lpfc 8.3.24: Add SR-IOV control [SCSI] lpfc 8.3.24: Extended hardware support and support dump images [SCSI] lpfc 8.3.24: Miscellaneous Fixes and Corrections [SCSI] libsas: Add option for SATA soft reset [SCSI] libsas: check dev->gone before submitting sata i/o [SCSI] libsas: fix/amend device gone notification in sas_deform_port() [SCSI] MAINTAINERS update for SCSI (new email address) [SCSI] Fix Ultrastor asm snippet [SCSI] osst: fix warning [SCSI] osst: wrong index used in inner loop [SCSI] aic94xx: world-writable sysfs update_bios file [SCSI] MAINTAINERS: Add drivers/target/ entry [SCSI] target: Convert TASK_ATTR to scsi_tcq.h definitions [SCSI] target: Convert REPORT_LUNs to use int_to_scsilun [SCSI] target: Fix task->task_execute_queue=1 clear bug + LUN_RESET OOPs [SCSI] target: Fix bug with task_sg chained transport_free_dev_tasks release [SCSI] target: Fix interrupt context bug with stats_lock and core_tmr_alloc_req ...
2011-05-27Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+2
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) ARM: 6945/1: Add unwinding support for division functions ARM: kill pmd_off() ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks ARM: 6943/1: mm: use TTBR1 instead of reserved context ID ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7 ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area ARM: add sendmmsg syscall ARM: 6863/1: allow hotplug on msm ARM: 6832/1: mmci: support for ST-Ericsson db8500v2 ARM: 6830/1: mach-ux500: force PrimeCell revisions ARM: 6829/1: amba: make hardcoded periphid override hardware ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID ARM: 6827/1: mach-netx: delete hardcoded periphid ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2 ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM at91: drop at572d940hf support at91rm9200: introduce at91rm9200_set_type to specficy cpu package at91: drop boot_params and PLAT_PHYS_OFFSET ...
2011-05-27gpio: make gpio_{request,free}_array gpio array parameter constLars-Peter Clausen2-4/+4
gpio_{request,free}_array should not (and do not) modify the passed gpio array, so make the parameter const. Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Eric Miao <[email protected]> Acked-by: Wolfram Sang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-05-27SUNRPC: Support for RPC over AF_LOCAL transportsChuck Lever2-1/+3
TI-RPC introduces the capability of performing RPC over AF_LOCAL sockets. It uses this mainly for registering and unregistering local RPC services securely with the local rpcbind, but we could also conceivably use it as a generic upcall mechanism. This patch provides a client-side only implementation for the moment. We might also consider a server-side implementation to provide AF_LOCAL access to NLM (for statd downcalls, and such like). Autobinding is not supported on kernel AF_LOCAL transports at this time. Kernel ULPs must specify the pathname of the remote endpoint when an AF_LOCAL transport is created. rpcbind supports registering services available via AF_LOCAL, so the kernel could handle it with some adjustment to ->rpcbind and ->set_port. But we don't need this feature for doing upcalls via well-known named sockets. This has not been tested with ULPs that move a substantial amount of data. Thus, I can't attest to how robust the write_space and congestion management logic is. Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds10-61/+64
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Kill ratelimit.h dependency in linux/net.h net: Add linux/sysctl.h includes where needed. net: Kill ether_table[] declaration. inetpeer: fix race in unused_list manipulations atm: expose ATM device index in sysfs IPVS: bug in ip_vs_ftp, same list heaad used in all netns. bug.h: Move ratelimit warn interfaces to ratelimit.h bonding: cleanup module option descriptions net:8021q:vlan.c Fix pr_info to just give the vlan fullname and version. net: davinci_emac: fix dev_err use at probe can: convert to %pK for kptr_restrict support net: fix ETHTOOL_SFEATURES compatibility with old ethtool_ops.set_flags netfilter: Fix several warnings in compat_mtw_from_user(). netfilter: ipset: fix ip_set_flush return code netfilter: ipset: remove unused variable from type_pf_tdel() netfilter: ipset: Use proper timeout value to jiffies conversion
2011-05-27net: Kill ratelimit.h dependency in linux/net.hDavid S. Miller2-6/+8
Ingo Molnar noticed that we have this unnecessary ratelimit.h dependency in linux/net.h, which hid compilation problems from people doing builds only with CONFIG_NET enabled. Move this stuff out to a seperate net/net_ratelimit.h file and include that in the only two places where this thing is needed. Signed-off-by: David S. Miller <[email protected]> Acked-by: Ingo Molnar <[email protected]>
2011-05-27net: Add linux/sysctl.h includes where needed.David S. Miller2-0/+2
Several networking headers were depending upon the implicit linux/sysctl.h include they get when including linux/net.h Add explicit includes. Signed-off-by: David S. Miller <[email protected]>
2011-05-27net: Kill ether_table[] declaration.David S. Miller1-4/+0
This got missed back in 2006 when Jes Sorensen deleted net/ethernet/sysctl_net_ether.c Signed-off-by: David S. Miller <[email protected]>
2011-05-27Merge branch 'docs-move' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs * 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: Create Documentation/security/, move LSM-, credentials-, and keys-related files from Documentation/ to Documentation/security/, add Documentation/security/00-INDEX, and update all occurrences of Documentation/<moved_file> to Documentation/security/<moved_file>.
2011-05-27Merge branch 'v4l_for_linus' of ↵Linus Torvalds2-0/+39
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] v1.88 DM04/QQBOX Move remote to use rc_core dvb-usb-remote [media] Add missing include guard to header file [media] Inlined functions should be static [media] Remove invalid parameter description [media] cpia2: fix warning about invalid trigraph sequence [media] s5p-csis: Add missing dependency on PLAT_S5P [media] gspca/kinect: wrap gspca_debug with GSPCA_DEBUG [media] fintek-cir: new driver for Fintek LPC SuperIO CIR function [media] uvcvideo: Connect video devices to media entities [media] uvcvideo: Register subdevices for each entity [media] uvcvideo: Register a v4l2_device [media] add V4L2-PIX-FMT-SRGGB12 & friends to docbook [media] Documentation/DocBook: Rename media fops xml files [media] Media DocBook: fix validation errors [media] wl12xx: g_volatile_ctrl fix: wrong field set [media] fix kconfig dependency warning for VIDEO_TIMBERDALE [media] dm1105: GPIO handling added, I2C on GPIO added, LNB control through GPIO reworked [media] Add support for M-5MOLS 8 Mega Pixel camera ISP
2011-05-27Merge branch 'for-linus' of ↵Linus Torvalds3-7/+804
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (42 commits) regulator: Fix _regulator_get_voltage if get_voltage callback is NULL USB: TWL6025 allow different regulator name REGULATOR: TWL6025: add support to twl-regulator regulator: twl6030: do not write to _GRP for regulator disable regulator: twl6030: do not write to _GRP for regulator enable TPS65911: Comparator: Add comparator driver TPS65911: Add support for added GPIO lines GPIO: TPS65910: Move driver to drivers/gpio/ TPS65911: Add new irq definitions regulator: tps65911: Add new chip version MFD: TPS65910: Add support for TPS65911 device regulator: Fix off-by-one value range checking for mc13xxx_regulator_get_voltage regulator: mc13892: Fix voltage unit in test case. regulator: Remove MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros mfd: Fix off-by-one value range checking for tps65910_i2c_write regulator: Only apply voltage constraints from consumers that set them regulator: If we can't configure optimum mode we're always in the best one regulator: max8997: remove useless code regulator: Fix memory leak in max8998_pmic_probe failure path regulator: Fix desc_id for tps65023/6507x/65910 ...
2011-05-27Merge git://git.infradead.org/battery-2.6Linus Torvalds2-0/+86
* git://git.infradead.org/battery-2.6: PXA: Use dev_pm_ops in z2_battery ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery ds2760_battery: Fix indexing of the 4 active full EEPROM registers power: Make test_power driver more dynamic. bq27x00_battery: Name of cycle count property max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build) ARM: RX-51: Enable isp1704 power on/off isp1704_charger: Allow board specific powering routine gpio-charger: Add gpio_charger_resume power_supply: Add driver for MAX8903 charger
2011-05-27Merge branch 'pablo/nf-2.6-updates' of git://1984.lsi.us.es/net-2.6David S. Miller3-11/+14
2011-05-27Merge branch 'tip/perf/urgent' of ↵Ingo Molnar5-7/+32
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
2011-05-27IPVS: bug in ip_vs_ftp, same list heaad used in all netns.Hans Schillstrom1-1/+2
When ip_vs was adapted to netns the ftp application was not adapted in a correct way. However this is a fix to avoid kernel errors. In the long term another solution might be chosen. I.e the ports that the ftp appl, uses should be per netns. Signed-off-by: Hans Schillstrom <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2011-05-27fs: pass exact type of data dirties to ->dirty_inodeChristoph Hellwig2-2/+2
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or anything else, so that the filesystem can track internally if it needs to push out a transaction for fdatasync or not. This is just the prototype change with no user for it yet. I plan to push large XFS changes for the next merge window, and getting this trivial infrastructure in this window would help a lot to avoid tree interdependencies. Also remove incorrect comments that ->dirty_inode can't block. That has been changed a long time ago, and many implementations rely on it. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Al Viro <[email protected]>
2011-05-27TPS65911: Comparator: Add comparator driverJorge Eduardo Candelaria1-0/+4
This driver adds functionality to the tps65911 chip driver. Two of the comparators are configurable by software and measures VCCS voltage to detect high or low voltage scenarios. Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Acked-by: Samuel Ortiz <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27TPS65911: Add support for added GPIO linesJorge Eduardo Candelaria1-76/+14
GPIO 1 to 8 are added for TPS65911 chip version. The gpio driver now handles more than one gpio lines. Subsequent versions of the chip family can add new GPIO lines with minimal driver changes. Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Acked-by: Grant Likely <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27TPS65911: Add new irq definitionsJorge Eduardo Candelaria1-1/+31
TPS65911 adds new interrupt sources, as well as two new registers to handle them, one for interrupt status and one for interrupt masking. The added irqs are: -VMBCH2 - Low and High threshold -GPIO1-8 - Rising and falling edge detection -WTCHDG - Watchdog interrupt -PWRDN - PWRDN reset interrupt The code should handle these new registers only when the chip version is TPS65911. Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Acked-by: Samuel Ortiz <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27regulator: tps65911: Add new chip versionJorge Eduardo Candelaria1-1/+9
The tps65911 chip introduces new features, including changes in the regulator module. - VDD1 and VDD2 remain unchanged. - VDD3 is now named VDDCTRL and has a wider voltage range. - LDOs are now named LDO1...8 and voltage ranges are sequential, making LDOs easier to handle. Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27MFD: TPS65910: Add support for TPS65911 deviceJorge Eduardo Candelaria1-0/+46
The TPS65911 is the next generation of the TPS65910 family of PMIC chips. It adds a few features: - Watchdog Timer - PWM & LED generators - Comparators for system control status It also adds a set of Interrupts and GPIOs, among other things. The driver exports a function to identify between different versions of the tps65910 family, allowing other modules to identify the capabilities of the current chip. Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Acked-by: Samuel Ortiz <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27regulator: Remove ↵Axel Lin1-4/+0
MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros In current implementation, the original macro implementation assumes the caller pass the parameter starting from 1 (to match the register names in datasheet). Thus we have unneeded plus one then minus one operations when using MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros. This patch removes these macros to avoid unneeded plus one then minus one operations without reducing readability. Signed-off-by: Axel Lin <[email protected]> Acked-by: Kyungmin Park <[email protected]> Acked-by: MyungJoo Ham <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27TPS65910: Add tps65910 regulator driverGraeme Gregory1-0/+14
The regulator module consists of 3 DCDCs and 8 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components Signed-off-by: Graeme Gregory <[email protected]> Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27TPS65910: IRQ: Add interrupt controllerGraeme Gregory1-0/+5
This module controls the interrupt handling for the tps chip. The interrupt sources are the following: - GPIO falling/rising edge detection - Battery voltage below/above threshold - PWRON signal - PWRHOLD signal - Temperature detection - RTC alarm and periodic event Signed-off-by: Graeme Gregory <[email protected]> Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Reviewed-by: Mark Brown <[email protected]> Acked-by: Samuel Ortiz <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27TPS65910: GPIO: Add GPIO driverGraeme Gregory1-0/+2
TPS65910 has one configurable GPIO that can be used for several purposes. Subsequent versions of the TPS chip support more than one GPIO. Signed-off-by: Graeme Gregory <[email protected]> Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Acked-by: Grant Likely <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27MFD: TPS65910: Add new mfd device for TPS65910Graeme Gregory1-0/+753
The TPS65910 chip is a power management IC for multimedia and handheld devices. It contains the following components: - Regulators - GPIO controller - RTC The tps65910 core driver is registered as a platform driver and provides communication through I2C with the host device for the different components. Signed-off-by: Graeme Gregory <[email protected]> Signed-off-by: Jorge Eduardo Candelaria <[email protected]> Acked-by: Samuel Ortiz <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27regulator: Support voltage offsets to compensate for drops in systemMark Brown1-0/+4
Some systems, particularly physically large systems used for early prototyping, may experience substantial voltage drops between the regulator and the consumers as a result of long traces in the system. With these systems voltages may need to be set higher than requested in order to ensure reliable system operation. Allow systems to work around such hardware issues by allowing constraints to supply an offset to be applied to any requested and reported voltages. This is not ideal, especially since the voltage drop may be load dependant, but is sufficient for most affected systems, it is not expected to be used in production hardware. The offset is applied after all constraint processing so constraints should be specified in terms of consumer values not physically configured values. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-27regulator: Remove supply_regulator_dev from machine configurationMark Brown1-3/+0
supply_regulator_dev (using a struct pointer) has been deprecated in favour of supply_regulator (using a regulator name) for quite a few releases now with a warning generated if it is used and there are no current in tree users so just remove the code. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]>
2011-05-26[SCSI] libsas: Add option for SATA soft resetDave Jiang1-0/+1
This allows a libsas driver to optionally provide a soft reset handler for libata to drive. The isci driver allows software to control the assertion/deassertion of SRST. [jejb: checkpatch.pl fixes] Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Dan Williams <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2011-05-26gpio: Convert gpio_is_valid to return boolJoe Perches2-5/+5
Make the code a bit more readable. Instead of casting an int to an unsigned then comparing to MAX_NR_GPIOS, add a >= 0 test and let the compiler optimizer do the conversion to unsigned. The generated code should be the same. Signed-off-by: Joe Perches <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-05-26arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT}Akinobu Mita1-2/+0
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT, CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used to test for existence of find bitops anymore. Signed-off-by: Akinobu Mita <[email protected]> Acked-by: Greg Ungerer <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Russell King <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Heiko Carstens <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26bitops: add #ifndef for each of find bitopsAkinobu Mita3-0/+13
The style that we normally use in asm-generic is to test the macro itself for existence, so in asm-generic, do: #ifndef find_next_zero_bit_le extern unsigned long find_next_zero_bit_le(const void *addr, unsigned long size, unsigned long offset); #endif and in the architectures, write static inline unsigned long find_next_zero_bit_le(const void *addr, unsigned long size, unsigned long offset) #define find_next_zero_bit_le find_next_zero_bit_le This adds the #ifndef for each of the find bitops in the generic header and source files. Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Akinobu Mita <[email protected]> Acked-by: Russell King <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Greg Ungerer <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26pid: fix typo in function descriptionSisir Koppaka1-1/+1
finds is misspelt as finr. No functional change. Signed-off-by: Sisir Koppaka <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26ipmi: convert to seq_file interfaceAlexey Dobriyan1-1/+1
The ->read_proc interface is going away, convert to seq_file. Signed-off-by: Alexey Dobriyan <[email protected]> Cc:Corey Minyard <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pagesOlaf Hering1-0/+5
The balloon driver in a Xen guest frees guest pages and marks them as mmio. When the kernel crashes and the crash kernel attempts to read the oldmem via /proc/vmcore a read from ballooned pages will generate 100% load in dom0 because Xen asks qemu-dm for the page content. Since the reads come in as 8byte requests each ballooned page is tried 512 times. With this change a hook can be registered which checks wether the given pfn is really ram. The hook has to return a value > 0 for ram pages, a value < 0 on error (because the hypercall is not known) and 0 for non-ram pages. This will reduce the time to read /proc/vmcore. Without this change a 512M guest with 128M crashkernel region needs 200 seconds to read it, with this change it takes just 2 seconds. Signed-off-by: Olaf Hering <[email protected]> Cc: Alexey Dobriyan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26mm: extract exe_file handling from procfsJiri Slaby3-29/+2
Setup and cleanup of mm_struct->exe_file is currently done in fs/proc/. This was because exe_file was needed only for /proc/<pid>/exe. Since we will need the exe_file functionality also for core dumps (so core name can contain full binary path), built this functionality always into the kernel. To achieve that move that out of proc FS to the kernel/ where in fact it should belong. By doing that we can make dup_mm_exe_file static. Also we can drop linux/proc_fs.h inclusion in fs/exec.c and kernel/fork.c. Signed-off-by: Jiri Slaby <[email protected]> Cc: Alexander Viro <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26asm-generic/ptrace.h: start a common low level ptrace helperMike Frysinger1-0/+74
This is a series of low level ptrace unification steps to make it easier for common code (like KGDB) to poke at register state. This also avoids having to duplicate higher level operations for most ports which don't have special needs for accessing things. This patch: This implements a bunch of helper funcs for poking the registers of a ptrace structure. Now common code should be able to portably update specific registers (like kgdb updating the PC). Signed-off-by: Mike Frysinger <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Sergei Shtylyov <[email protected]> Cc: Dongdong Deng <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26memcg: add the pagefault count into memcg statsYing Han1-0/+7
Two new stats in per-memcg memory.stat which tracks the number of page faults and number of major page faults. "pgfault" "pgmajfault" They are different from "pgpgin"/"pgpgout" stat which count number of pages charged/discharged to the cgroup and have no meaning of reading/ writing page to disk. It is valuable to track the two stats for both measuring application's performance as well as the efficiency of the kernel page reclaim path. Counting pagefaults per process is useful, but we also need the aggregated value since processes are monitored and controlled in cgroup basis in memcg. Functional test: check the total number of pgfault/pgmajfault of all memcgs and compare with global vmstat value: $ cat /proc/vmstat | grep fault pgfault 1070751 pgmajfault 553 $ cat /dev/cgroup/memory.stat | grep fault pgfault 1071138 pgmajfault 553 total_pgfault 1071142 total_pgmajfault 553 $ cat /dev/cgroup/A/memory.stat | grep fault pgfault 199 pgmajfault 0 total_pgfault 199 total_pgmajfault 0 Performance test: run page fault test(pft) wit 16 thread on faulting in 15G anon pages in 16G container. There is no regression noticed on the "flt/cpu/s" Sample output from pft: TAG pft:anon-sys-default: Gb Thr CLine User System Wall flt/cpu/s fault/wsec 15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260 +-------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 10 16682.962 17344.027 16913.524 16928.812 166.5362 + 10 16695.568 16923.896 16820.604 16824.652 84.816568 No difference proven at 95.0% confidence [[email protected]: fix build] [[email protected]: shmem fix] Signed-off-by: Ying Han <[email protected]> Acked-by: KAMEZAWA Hiroyuki <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Reviewed-by: Minchan Kim <[email protected]> Cc: Daisuke Nishimura <[email protected]> Acked-by: Balbir Singh <[email protected]> Signed-off-by: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26memcg: rename mem_cgroup_zone_nr_pages() to mem_cgroup_zone_nr_lru_pages()Ying Han1-5/+5
The caller of the function has been renamed to zone_nr_lru_pages(), and this is just fixing up in the memcg code. The current name is easily to be mis-read as zone's total number of pages. Signed-off-by: Ying Han <[email protected]> Acked-by: Johannes Weiner <[email protected]> Acked-by: KAMEZAWA Hiroyuki <[email protected]> Reviewed-by: Minchan Kim <[email protected]> Cc: Balbir Singh <[email protected]> Cc: Daisuke Nishimura <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26memcg: fix get_scan_count() for small targetsKAMEZAWA Hiroyuki1-5/+0
During memory reclaim we determine the number of pages to be scanned per zone as (anon + file) >> priority. Assume scan = (anon + file) >> priority. If scan < SWAP_CLUSTER_MAX, the scan will be skipped for this time and priority gets higher. This has some problems. 1. This increases priority as 1 without any scan. To do scan in this priority, amount of pages should be larger than 512M. If pages>>priority < SWAP_CLUSTER_MAX, it's recorded and scan will be batched, later. (But we lose 1 priority.) If memory size is below 16M, pages >> priority is 0 and no scan in DEF_PRIORITY forever. 2. If zone->all_unreclaimabe==true, it's scanned only when priority==0. So, x86's ZONE_DMA will never be recoverred until the user of pages frees memory by itself. 3. With memcg, the limit of memory can be small. When using small memcg, it gets priority < DEF_PRIORITY-2 very easily and need to call wait_iff_congested(). For doing scan before priorty=9, 64MB of memory should be used. Then, this patch tries to scan SWAP_CLUSTER_MAX of pages in force...when 1. the target is enough small. 2. it's kswapd or memcg reclaim. Then we can avoid rapid priority drop and may be able to recover all_unreclaimable in a small zones. And this patch removes nr_saved_scan. This will allow scanning in this priority even when pages >> priority is very small. Signed-off-by: KAMEZAWA Hiroyuki <[email protected]> Acked-by: Ying Han <[email protected]> Cc: Balbir Singh <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Cc: Daisuke Nishimura <[email protected]> Cc: Mel Gorman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26memcg: reclaim memory from nodes in round-robin orderYing Han1-0/+1
Presently, memory cgroup's direct reclaim frees memory from the current node. But this has some troubles. Usually when a set of threads works in a cooperative way, they tend to operate on the same node. So if they hit limits under memcg they will reclaim memory from themselves, damaging the active working set. For example, assume 2 node system which has Node 0 and Node 1 and a memcg which has 1G limit. After some work, file cache remains and the usages are Node 0: 1M Node 1: 998M. and run an application on Node 0, it will eat its foot before freeing unnecessary file caches. This patch adds round-robin for NUMA and adds equal pressure to each node. When using cpuset's spread memory feature, this will work very well. But yes, a better algorithm is needed. [[email protected]: comment editing] [[email protected]: fix time comparisons] Signed-off-by: Ying Han <[email protected]> Signed-off-by: KAMEZAWA Hiroyuki <[email protected]> Cc: Balbir Singh <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Cc: Daisuke Nishimura <[email protected]> Cc: Mel Gorman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-26memcg: count the soft_limit reclaim in global background reclaimYing Han2-3/+6
The global kswapd scans per-zone LRU and reclaims pages regardless of the cgroup. It breaks memory isolation since one cgroup can end up reclaiming pages from another cgroup. Instead we should rely on memcg-aware target reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under memory pressure. In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. This patch is the first step to skip shrink_zone() if soft_limit reclaim does enough work. This is part of the effort which tries to reduce reclaiming pages in global LRU in memcg. The per-memcg background reclaim patchset further enhances the per-cgroup targetting reclaim, which I should have V4 posted shortly. Try running multiple memory intensive workloads within seperate memcgs. Watch the counters of soft_steal in memory.stat. $ cat /dev/cgroup/A/memory.stat | grep 'soft' soft_steal 240000 soft_scan 240000 total_soft_steal 240000 total_soft_scan 240000 This patch: In the global background reclaim, we do soft reclaim before scanning the per-zone LRU. However, the return value is ignored. We would like to skip shrink_zone() if soft_limit reclaim does enough work. Also, we need to make the memory pressure balanced across per-memcg zones, like the logic vm-core. This patch is the first step where we start with counting the nr_scanned and nr_reclaimed from soft_limit reclaim into the global scan_control. Signed-off-by: Ying Han <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Mel Gorman <[email protected]> Cc: KAMEZAWA Hiroyuki <[email protected]> Cc: Balbir Singh <[email protected]> Acked-by: Daisuke Nishimura <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.