| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull networking fixes from David Miller:
1) Avoid negative netdev refcount in error flow of xfrm state add, from
Aviad Yehezkel.
2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the
ethernet header protocol field in xfrm{4,6}_mode_tunnel_input().
From Yossi Kuperman.
3) Fix a syzbot triggered skb_under_panic in pppoe having to do with
failing to allocate an appropriate amount of headroom. From
Guillaume Nault.
4) Fix memory leak in vmxnet3 driver, from Neil Horman.
5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module,
from Wolfgang Bumiller.
6) Restrict what kinds of sockets can be bound to the KCM multiplexer
and also disallow when another layer has attached to the socket and
made use of sk_user_data. From Tom Herbert.
7) Fix use before init of IOTLB in vhost code, from Jason Wang.
8) Correct STACR register write bit definition in IBM emac driver, from
Ivan Mikhaylov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/ibm/emac: wrong bit is used for STA control register write
net/ibm/emac: add 8192 rx/tx fifo size
vhost: do not try to access device IOTLB when not initialized
vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
i40e: flower: check if TC offload is enabled on a netdev
qed: Free reserved MR tid
qed: Remove reserveration of dpi for kernel
kcm: Check if sk_user_data already set in kcm_attach
kcm: Only allow TCP sockets to be attached to a KCM mux
net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
net: sched: em_nbyte: don't add the data offset twice
mlxsw: spectrum_router: Don't log an error on missing neighbor
vmxnet3: repair memory leak
ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
pppoe: take ->needed_headroom of lower device into account on xmit
xfrm: fix boolean assignment in xfrm_get_type_offload
xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version
xfrm: fix error flow in case of add state fails
xfrm: Add SA to hardware at the end of xfrm_state_construct()
|
|
no users since 2014
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Signed-off-by: Al Viro <[email protected]>
|
|
Signed-off-by: Al Viro <[email protected]>
|
|
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Only two of dev_ioctl() callers may pass SIOCGIFCONF to it.
Separating that codepath from the rest of dev_ioctl() allows both
to simplify dev_ioctl() itself (all other cases work with struct ifreq *)
*and* seriously simplify the compat side of that beast: all it takes
is passing to inet_gifconf() an extra argument - the size of individual
records (sizeof(struct ifreq) or sizeof(struct compat_ifreq)). With
dev_ifconf() called directly from sock_do_ioctl()/compat_dev_ifconf()
that's easy to arrange.
As the result, compat side of SIOCGIFCONF doesn't need any
allocations, copy_in_user() back and forth, etc.
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
When building the erspan header for either v1 or v2, the eth_hdr()
does not point to the right inner packet's eth_hdr,
causing kasan report use-after-free and slab-out-of-bouds read.
The patch fixes the following syzkaller issues:
[1] BUG: KASAN: slab-out-of-bounds in erspan_xmit+0x22d4/0x2430 net/ipv4/ip_gre.c:735
[2] BUG: KASAN: slab-out-of-bounds in erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698
[3] BUG: KASAN: use-after-free in erspan_xmit+0x22d4/0x2430 net/ipv4/ip_gre.c:735
[4] BUG: KASAN: use-after-free in erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698
[2] CPU: 0 PID: 3654 Comm: syzkaller377964 Not tainted 4.15.0-rc9+ #185
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
__asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:440
erspan_build_header+0x3bf/0x3d0 net/ipv4/ip_gre.c:698
erspan_xmit+0x3b8/0x13b0 net/ipv4/ip_gre.c:740
__netdev_start_xmit include/linux/netdevice.h:4042 [inline]
netdev_start_xmit include/linux/netdevice.h:4051 [inline]
packet_direct_xmit+0x315/0x6b0 net/packet/af_packet.c:266
packet_snd net/packet/af_packet.c:2943 [inline]
packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2968
sock_sendmsg_nosec net/socket.c:638 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:648
SYSC_sendto+0x361/0x5c0 net/socket.c:1729
SyS_sendto+0x40/0x50 net/socket.c:1697
do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline]
do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389
entry_SYSENTER_compat+0x54/0x63 arch/x86/entry/entry_64_compat.S:129
RIP: 0023:0xf7fcfc79
RSP: 002b:00000000ffc6976c EFLAGS: 00000286 ORIG_RAX: 0000000000000171
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000020011000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020008000
RBP: 000000000000001c R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre")
Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Signed-off-by: William Tu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
All users are now converted to tc_cls_common_offload_init().
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
cls_bpf now guarantees that only device-bound programs are
allowed with skip_sw. The drivers no longer pay attention to
flags on filter load, therefore the bpf_offload member can be
removed. If flags are needed again they should probably be
added to struct tc_cls_common_offload instead.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Rename the tc_cls_common_offload_init() helper function to
tc_cls_common_offload_init_deprecated() and add a new implementation
which also takes flags argument. We will only set extack if flags
indicate that offload is forced (skip_sw) otherwise driver errors
should be ignored, as they don't influence the overall filter
installation.
Note that we need the tc_skip_hw() helper for new version, therefore
it is added later in the file.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Propagate extack to cls->destroy callbacks when called from
non-error paths. On error paths pass NULL to avoid overwriting
the failure message.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
TCF_LAYER_LINK and TCF_LAYER_NETWORK returned the same pointer as
skb->data points to the network header.
Use skb_mac_header instead.
Signed-off-by: Wolfgang Bumiller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"With the new ORC unwinder, ftrace stack tracing became disfunctional.
One was that ORC didn't know how to handle the ftrace callbacks in
general (which Josh fixed).
The other was that ORC would just bail if it hit a dynamically
allocated trampoline. Which means all ftrace stack tracing that
happens from the function tracer would produce no results (that
includes killing the max stack size tracer). I added a check to the
ORC unwinder to see if the trampoline belonged to ftrace, and if it
did, use the orc entry of the static trampoline that was used to
create the dynamic one (it would be identical).
Finally, I noticed that the skip values of the stack tracing were out
of whack. I went through and fixed them up"
* tag 'trace-v4.15-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Update stack trace skipping for ORC unwinder
ftrace, orc, x86: Handle ftrace dynamically allocated trampolines
x86/ftrace: Fix ORC unwinding from ftrace handlers
|
|
This reverts commit 6cfb521ac0d5b97470883ff9b7facae264b7ab12.
Turns out distros do not want to make retpoline as part of their "ABI",
so this patch should not have been merged. Sorry Andi, this was my
fault, I suggested it when your original patch was the "correct" way of
doing this instead.
Reported-by: Jiri Kosina <[email protected]>
Fixes: 6cfb521ac0d5 ("module: Add retpoline tag to VERMAGIC")
Acked-by: Andi Kleen <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
commit fbb16563c6c2 ("ASoC: snd_soc_component_driver has pmdown_time")
added new .pmdown_time which is for inverted version of current
.ignore_pmdown_time
But it is confusable name. Let's rename it to .use_pmdown_time
Reported-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Those helpers are going to be used by overlayfs to implement
NFS export decode.
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
Tejun reported the following cpu-hotplug lock (percpu-rwsem) read recursion:
tg_set_cfs_bandwidth()
get_online_cpus()
cpus_read_lock()
cfs_bandwidth_usage_inc()
static_key_slow_inc()
cpus_read_lock()
Reported-by: Tejun Heo <[email protected]>
Tested-by: Tejun Heo <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/20180122215328.GP3397@worktop
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after
sysctl setting") removed the initialisation of
ipv6_pinfo::autoflowlabel and added a second flag to indicate
whether this field or the net namespace default should be used.
The getsockopt() handling for this case was not updated, so it
currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is
not explicitly enabled. Fix it to return the effective value, whether
that has been set at the socket or net namespace level.
Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
use RCU instead of spin_{,unlock}_bh() to protect concurrent read/write on
act_csum configuration, to reduce the effects of contention in the data
path when multiple readers are present.
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some of the functions done by the generic driver should also be needed
by other opencapi drivers: attaching a context to an adapter,
translation fault handling, AFU interrupt allocation...
So to avoid code duplication, the driver provides a kernel API that
other drivers can use, similar to calling a in-kernel library.
It is still a bit theoretical, for lack of real hardware, and will
likely need adjustements down the road. But we used the cxlflash
driver as a guinea pig.
Signed-off-by: Frederic Barrat <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
Add user APIs through ioctl to allocate, free, and be notified of an
AFU interrupt.
For opencapi, an AFU can trigger an interrupt on the host by sending a
specific command targeting a 64-bit object handle. On POWER9, this is
implemented by mapping a special page in the address space of a
process and a write to that page will trigger an interrupt.
Signed-off-by: Frederic Barrat <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
Add an ocxl driver to handle generic opencapi devices. Of course, it's
not meant to be the only opencapi driver, any device is free to
implement its own. But if a host application only needs basic services
like attaching to an opencapi adapter, have translation faults handled
or allocate AFU interrupts, it should suffice.
The AFU config space must follow the opencapi specification and use
the expected vendor/device ID to be seen by the generic driver.
The driver exposes the device AFUs as a char device in /dev/ocxl/
Note that the driver currently doesn't handle memory attached to the
opencapi device.
Signed-off-by: Frederic Barrat <[email protected]>
Signed-off-by: Andrew Donnellan <[email protected]>
Signed-off-by: Alastair D'Silva <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
In the opencapi protocol, host memory contexts are referenced by a
'actag'. During setup, a driver must tell the device how many actags
it can used, and what values are acceptable.
On POWER9, the NPU can handle 64 actags per link, so they must be
shared between all the PCI functions of the link. To get a global
picture of how many actags are used by each AFU of every function, we
capture some data at the end of PCI enumeration, so that actags can be
shared fairly if needed.
This is not powernv specific per say, but rather a consequence of the
opencapi configuration specification being quite general. The number
of available actags on POWER9 makes it more likely to be hit. This is
somewhat mitigated by the fact that existing AFUs are coded by
requesting a reasonable count of actags and existing devices carry
only one AFU.
Signed-off-by: Frederic Barrat <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
The function tracer can create a dynamically allocated trampoline that is
called by the function mcount or fentry hook that is used to call the
function callback that is registered. The problem is that the orc undwinder
will bail if it encounters one of these trampolines. This breaks the stack
trace of function callbacks, which include the stack tracer and setting the
stack trace for individual functions.
Since these dynamic trampolines are basically copies of the static ftrace
trampolines defined in ftrace_*.S, we do not need to create new orc entries
for the dynamic trampolines. Finding the return address on the stack will be
identical as the functions that were copied to create the dynamic
trampolines. When encountering a ftrace dynamic trampoline, we can just use
the orc entry of the ftrace static function that was copied for that
trampoline.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
The Atomic Operations feature (PCIe r4.0, sec 6.15) allows atomic
transctions to be requested by, routed through and completed by PCIe
components. Routing and completion do not require software support.
Component support for each is detectable via the DEVCAP2 register.
A Requester may use AtomicOps only if its PCI_EXP_DEVCTL2_ATOMIC_REQ is
set. This should be set only if the Completer and all intermediate routing
elements support AtomicOps.
A concrete example is the AMD Fiji-class GPU (which is capable of making
AtomicOp requests), below a PLX 8747 switch (advertising AtomicOp routing)
with a Haswell host bridge (advertising AtomicOp completion support).
Add pci_enable_atomic_ops_to_root() for per-device control over AtomicOp
requests. This checks to be sure the Root Port supports completion of the
desired AtomicOp sizes and the path to the Root Port supports routing the
AtomicOps.
Signed-off-by: Jay Cornwall <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
[bhelgaas: changelog, comments, whitespace]
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
git://git.linux-nfs.org/projects/anna/linux-nfs
NFS-over-RDMA client updates for Linux 4.16
New features:
- xprtrdma tracepoints
Bugfixes and cleanups:
- Fix memory leak if rpcrdma_buffer_create() fails
- Fix allocating extra rpcrdma_reps for the backchannel
- Remove various unused and redundant variables and lock cycles
- Fix IPv6 support in xprt_rdma_set_port()
- Fix memory leak by calling buf_free for callback replies
- Fix "bytes registered" accounting
- Fix kernel-doc comments
- SUNRPC tracepoint cleanups for consistent information
- Optimizations for __rpc_execute()
|
|
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in
'net'.
The esp{4,6}_offload.c conflicts were overlapping changes.
The 'out' label is removed so we just return ERR_PTR(-EINVAL)
directly.
Signed-off-by: David S. Miller <[email protected]>
|
|
Backchannel tasks will not have a reference to the rpc_clnt. Return -1 for
cl_clid in that case.
Signed-off-by: Benjamin Coddington <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc,
powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO
(alpha, metag, sparc, and tile). These two sets of architectures do
not interesect so remove the trapno paramater to remove confusion.
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
Since the SRP_LOGIN_REQ defined in the SRP standard is larger than
what fits in the RDMA/CM login request private data, introduce a new
login request format for the RDMA/CM.
Note: since srp_daemon and ibsrpdm rely on the subnet manager and
since there is no equivalent of the IB subnet manager in non-IB
networks, login has to be performed manually for non-IB networks.
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Fix the documentation warning:
include/linux/netdevice.h:1939: warning: Excess struct member 'carrier_changes' description in 'net_device'
Reported-by: kbuild test robot <[email protected]>
Fixes: b2d3bcfa26a7 ("net: core: Expose number of link up/down transitions")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Clean up: Make it easier to use text search when browsing a trace
report. Other events use "status=%d".
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Track RPC timeouts: report the XID and the server address to match
the content of network capture.
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
This includes decoding Write and Reply chunks, and fixing up inline
payloads.
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
These can be shared with all kernel ULPs, and more can easily be
added as needed.
Note: checkpatch.pl has some heartburn with the TRACE_DEFINE_ENUM
macros and the LIST macros. These follow the same style as other
header files under include/tracing/events , thus should be
considered acceptable exceptions.
Signed-off-by: Chuck Lever <[email protected]>
Acked-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
This patch just adds the capability for GFS2 to track which function
called gfs2_log_flush. This should make it easier to diagnose
problems based on the sequence of events found in the journals.
Signed-off-by: Bob Peterson <[email protected]>
Reviewed-by: Andreas Gruenbacher <[email protected]>
|
|
This patch adds a new structure called gfs2_log_header_v2 which is used
to store expanded fields into previously unused areas of the log headers
(i.e., this change is backwards compatible). Some of these are used for
debug purposes so we can backtrack when problems occur. Others are
reserved for future expansion.
This patch is based on a prototype from Steve Whitehouse.
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Add nop variant of media_entity_cleanup. This allows calling
media_entity_cleanup whether or not Media controller is enabled,
simplifying driver code.
Also drop #ifdefs on a few drivers around media_entity_cleanup().
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|