aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2023-10-23bpf: correct loop detection for iterators convergenceEduard Zingerman1-0/+15
It turns out that .branches > 0 in is_state_visited() is not a sufficient condition to identify if two verifier states form a loop when iterators convergence is computed. This commit adds logic to distinguish situations like below: (I) initial (II) initial | | V V .---------> hdr .. | | | | V V | .------... .------.. | | | | | | V V V V | ... ... .-> hdr .. | | | | | | | V V | V V | succ <- cur | succ <- cur | | | | | V | V | ... | ... | | | | '----' '----' For both (I) and (II) successor 'succ' of the current state 'cur' was previously explored and has branches count at 0. However, loop entry 'hdr' corresponding to 'succ' might be a part of current DFS path. If that is the case 'succ' and 'cur' are members of the same loop and have to be compared exactly. Co-developed-by: Andrii Nakryiko <[email protected]> Co-developed-by: Alexei Starovoitov <[email protected]> Reviewed-by: Andrii Nakryiko <[email protected]> Signed-off-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-10-23bpf: exact states comparison for iterator convergence checksEduard Zingerman1-0/+1
Convergence for open coded iterators is computed in is_state_visited() by examining states with branches count > 1 and using states_equal(). states_equal() computes sub-state relation using read and precision marks. Read and precision marks are propagated from children states, thus are not guaranteed to be complete inside a loop when branches count > 1. This could be demonstrated using the following unsafe program: 1. r7 = -16 2. r6 = bpf_get_prandom_u32() 3. while (bpf_iter_num_next(&fp[-8])) { 4. if (r6 != 42) { 5. r7 = -32 6. r6 = bpf_get_prandom_u32() 7. continue 8. } 9. r0 = r10 10. r0 += r7 11. r8 = *(u64 *)(r0 + 0) 12. r6 = bpf_get_prandom_u32() 13. } Here verifier would first visit path 1-3, create a checkpoint at 3 with r7=-16, continue to 4-7,3 with r7=-32. Because instructions at 9-12 had not been visitied yet existing checkpoint at 3 does not have read or precision mark for r7. Thus states_equal() would return true and verifier would discard current state, thus unsafe memory access at 11 would not be caught. This commit fixes this loophole by introducing exact state comparisons for iterator convergence logic: - registers are compared using regs_exact() regardless of read or precision marks; - stack slots have to have identical type. Unfortunately, this is too strict even for simple programs like below: i = 0; while(iter_next(&it)) i++; At each iteration step i++ would produce a new distinct state and eventually instruction processing limit would be reached. To avoid such behavior speculatively forget (widen) range for imprecise scalar registers, if those registers were not precise at the end of the previous iteration and do not match exactly. This a conservative heuristic that allows to verify wide range of programs, however it precludes verification of programs that conjure an imprecise value on the first loop iteration and use it as precise on the second. Test case iter_task_vma_for_each() presents one of such cases: unsigned int seen = 0; ... bpf_for_each(task_vma, vma, task, 0) { if (seen >= 1000) break; ... seen++; } Here clang generates the following code: <LBB0_4>: 24: r8 = r6 ; stash current value of ... body ... 'seen' 29: r1 = r10 30: r1 += -0x8 31: call bpf_iter_task_vma_next 32: r6 += 0x1 ; seen++; 33: if r0 == 0x0 goto +0x2 <LBB0_6> ; exit on next() == NULL 34: r7 += 0x10 35: if r8 < 0x3e7 goto -0xc <LBB0_4> ; loop on seen < 1000 <LBB0_6>: ... exit ... Note that counter in r6 is copied to r8 and then incremented, conditional jump is done using r8. Because of this precision mark for r6 lags one state behind of precision mark on r8 and widening logic kicks in. Adding barrier_var(seen) after conditional is sufficient to force clang use the same register for both counting and conditional jump. This issue was discussed in the thread [1] which was started by Andrew Werner <[email protected]> demonstrating a similar bug in callback functions handling. The callbacks would be addressed in a followup patch. [1] https://lore.kernel.org/bpf/[email protected]/ Co-developed-by: Andrii Nakryiko <[email protected]> Co-developed-by: Alexei Starovoitov <[email protected]> Signed-off-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-10-23page_pool: update document about fragment APIYunsheng Lin1-13/+80
As more drivers begin to use the fragment API, update the document about how to decide which API to use for the driver author. Signed-off-by: Yunsheng Lin <[email protected]> CC: Lorenzo Bianconi <[email protected]> CC: Alexander Duyck <[email protected]> CC: Liang Chen <[email protected]> CC: Alexander Lobakin <[email protected]> CC: Dima Tisnek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23page_pool: introduce page_pool_alloc() APIYunsheng Lin1-0/+66
Currently page pool supports the below use cases: use case 1: allocate page without page splitting using page_pool_alloc_pages() API if the driver knows that the memory it need is always bigger than half of the page allocated from page pool. use case 2: allocate page frag with page splitting using page_pool_alloc_frag() API if the driver knows that the memory it need is always smaller than or equal to the half of the page allocated from page pool. There is emerging use case [1] & [2] that is a mix of the above two case: the driver doesn't know the size of memory it need beforehand, so the driver may use something like below to allocate memory with least memory utilization and performance penalty: if (size << 1 > max_size) page = page_pool_alloc_pages(); else page = page_pool_alloc_frag(); To avoid the driver doing something like above, add the page_pool_alloc() API to support the above use case, and update the true size of memory that is acctually allocated by updating '*size' back to the driver in order to avoid exacerbating truesize underestimate problem. Rename page_pool_free() which is used in the destroy process to __page_pool_destroy() to avoid confusion with the newly added API. 1. https://lore.kernel.org/all/d3ae6bd3537fbce379382ac6a42f67e22f27ece2.1683896626.git.lorenzo@kernel.org/ 2. https://lore.kernel.org/all/[email protected]/ Signed-off-by: Yunsheng Lin <[email protected]> CC: Lorenzo Bianconi <[email protected]> CC: Alexander Duyck <[email protected]> CC: Liang Chen <[email protected]> CC: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23page_pool: remove PP_FLAG_PAGE_FRAGYunsheng Lin1-4/+2
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count handling is unified and page_pool_alloc_frag() is supported in 32-bit arch with 64-bit DMA, so remove it. Signed-off-by: Yunsheng Lin <[email protected]> CC: Lorenzo Bianconi <[email protected]> CC: Alexander Duyck <[email protected]> CC: Liang Chen <[email protected]> CC: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23page_pool: unify frag_count handling in page_pool_is_last_frag()Yunsheng Lin1-13/+34
Currently when page_pool_create() is called with PP_FLAG_PAGE_FRAG flag, page_pool_alloc_pages() is only allowed to be called under the below constraints: 1. page_pool_fragment_page() need to be called to setup page->pp_frag_count immediately. 2. page_pool_defrag_page() often need to be called to drain the page->pp_frag_count when there is no more user will be holding on to that page. Those constraints exist in order to support a page to be split into multi fragments. And those constraints have some overhead because of the cache line dirtying/bouncing and atomic update. Those constraints are unavoidable for case when we need a page to be split into more than one fragment, but there is also case that we want to avoid the above constraints and their overhead when a page can't be split as it can only hold a fragment as requested by user, depending on different use cases: use case 1: allocate page without page splitting. use case 2: allocate page with page splitting. use case 3: allocate page with or without page splitting depending on the fragment size. Currently page pool only provide page_pool_alloc_pages() and page_pool_alloc_frag() API to enable the 1 & 2 separately, so we can not use a combination of 1 & 2 to enable 3, it is not possible yet because of the per page_pool flag PP_FLAG_PAGE_FRAG. So in order to allow allocating unsplit page without the overhead of split page while still allow allocating split page we need to remove the per page_pool flag in page_pool_is_last_frag(), as best as I can think of, it seems there are two methods as below: 1. Add per page flag/bit to indicate a page is split or not, which means we might need to update that flag/bit everytime the page is recycled, dirtying the cache line of 'struct page' for use case 1. 2. Unify the page->pp_frag_count handling for both split and unsplit page by assuming all pages in the page pool is split into a big fragment initially. As page pool already supports use case 1 without dirtying the cache line of 'struct page' whenever a page is recyclable, we need to support the above use case 3 with minimal overhead, especially not adding any noticeable overhead for use case 1, and we are already doing an optimization by not updating pp_frag_count in page_pool_defrag_page() for the last fragment user, this patch chooses to unify the pp_frag_count handling to support the above use case 3. There is no noticeable performance degradation and some justification for unifying the frag_count handling with this patch applied using a micro-benchmark testing in [1]. 1. https://lore.kernel.org/all/[email protected]/ Signed-off-by: Yunsheng Lin <[email protected]> CC: Lorenzo Bianconi <[email protected]> CC: Alexander Duyck <[email protected]> CC: Liang Chen <[email protected]> CC: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-24Merge tag 'topic/vmemdup-user-array-2023-10-24-1' of ↵Dave Airlie1-0/+40
git://anongit.freedesktop.org/drm/drm into drm-next vmemdup-user-array API and changes with it. This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes. Signed-off-by: Dave Airlie <[email protected]> From: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-10-23Merge tag 'for-net-next-2023-10-23' of ↵Jakub Kicinski3-8/+37
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add 0bda:b85b for Fn-Link RTL8852BE - ISO: Many fixes for broadcast support - Mark bcm4378/bcm4387 as BROKEN_LE_CODED - Add support ITTIM PE50-M75C - Add RTW8852BE device 13d3:3570 - Add support for QCA2066 - Add support for Intel Misty Peak - 8087:0038 * tag 'for-net-next-2023-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: Bluetooth: hci_sync: Fix Opcode prints in bt_dev_dbg/err Bluetooth: Fix double free in hci_conn_cleanup Bluetooth: btmtksdio: enable bluetooth wakeup in system suspend Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE Bluetooth: hci_bcm4377: Mark bcm4378/bcm4387 as BROKEN_LE_CODED Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Bluetooth: Make handle of hci_conn be unique Bluetooth: btusb: Add date->evt_skb is NULL check Bluetooth: ISO: Fix bcast listener cleanup Bluetooth: msft: __hci_cmd_sync() doesn't return NULL Bluetooth: ISO: Match QoS adv handle with BIG handle Bluetooth: ISO: Allow binding a bcast listener to 0 bises Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables Bluetooth: qca: add support for QCA2066 Bluetooth: ISO: Set CIS bit only for devices with CIS support Bluetooth: Add support for Intel Misty Peak - 8087:0038 Bluetooth: Add support ITTIM PE50-M75C Bluetooth: ISO: Pass BIG encryption info through QoS Bluetooth: ISO: Fix BIS cleanup ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23devlink: make devlink_flash_overwrite enum named oneJiri Pirko1-1/+1
Since this enum is going to be used in generated userspace file, name it properly. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23bpf, tcx: Get rid of tcx_link_constDaniel Borkmann1-6/+1
Small clean up to get rid of the extra tcx_link_const() and only retain the tcx_link(). Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-10-23ASoC: Merge up v6.6-rc7Mark Brown78-196/+294
Get fixes needed so we can enable build of ams-delta in more configurations.
2023-10-23Bluetooth: Make handle of hci_conn be uniqueZiyang Xuan1-1/+5
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if the handle of the first hci_conn entry in hci_dev->conn_hash->list is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of hci_conn->handle to make it be unique. Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles") Signed-off-by: Ziyang Xuan <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-23Bluetooth: ISO: Fix bcast listener cleanupIulia Tanasescu1-23/+20
This fixes the cleanup callback for slave bis and pa sync hcons. Closing all bis hcons will trigger BIG Terminate Sync, while closing all bises and the pa sync hcon will also trigger PA Terminate Sync. Signed-off-by: Iulia Tanasescu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-23Bluetooth: ISO: Pass BIG encryption info through QoSIulia Tanasescu2-1/+27
This enables a broadcast sink to be informed if the PA it has synced with is associated with an encrypted BIG, by retrieving the socket QoS and checking the encryption field. After PA sync has been successfully established and the first BIGInfo advertising report is received, a new hcon is added and notified to the ISO layer. The ISO layer sets the encryption field of the socket and hcon QoS according to the encryption parameter of the BIGInfo advertising report event. After that, the userspace is woken up, and the QoS of the new PA sync socket can be read, to inspect the encryption field and follow up accordingly. Signed-off-by: Iulia Tanasescu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-23Bluetooth: ISO: Fix BIS cleanupIulia Tanasescu1-0/+2
This fixes the master BIS cleanup procedure - as opposed to CIS cleanup, no HCI disconnect command should be issued. A master BIS should only be terminated by disabling periodic and extended advertising, and terminating the BIG. In case of a Broadcast Receiver, all BIS and PA connections can be cleaned up by calling hci_conn_failed, since it contains all function calls that are necessary for successful cleanup. Signed-off-by: Iulia Tanasescu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-23EDAC/versal: Add a Xilinx Versal memory controller driverShubhrajyoti Datta1-0/+12
Add a EDAC driver for the RAS capabilities on the Xilinx integrated DDR Memory Controllers (DDRMCs) which support both DDR4 and LPDDR4/4X memory interfaces. It has four programmable Network-on-Chip (NoC) interface ports and is designed to handle multiple streams of traffic. The driver reports correctable and uncorrectable errors, and also creates debugfs entries for testing through error injection. [ bp: - Add a pointer to the documentation about the register unlock code. - Squash in a fix for a Smatch static checker issue as reported by Dan Carpenter: https://lore.kernel.org/r/[email protected] ] Co-developed-by: Sai Krishna Potthuri <[email protected]> Signed-off-by: Sai Krishna Potthuri <[email protected]> Signed-off-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-10-23Merge branches 'rcu/torture', 'rcu/fixes', 'rcu/docs', 'rcu/refscale', ↵Frederic Weisbecker6-9/+51
'rcu/tasks' and 'rcu/stall' into rcu/next rcu/torture: RCU torture, locktorture and generic torture infrastructure rcu/fixes: Generic and misc fixes rcu/docs: RCU documentation updates rcu/refscale: RCU reference scalability test updates rcu/tasks: RCU tasks updates rcu/stall: Stall detection updates
2023-10-23ASoC: simple-card-utils: Make simple_util_remove() return voidUwe Kleine-König1-1/+1
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. simple_util_remove() returned zero unconditionally. Make it return void instead and convert all users to struct platform_device::remove_new(). Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Herve Codina <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-10-23wifi: mac80211: don't drop all unprotected public action framesAvraham Stern1-0/+29
Not all public action frames have a protected variant. When MFP is enabled drop only public action frames that have a dual protected variant. Fixes: 76a3059cf124 ("wifi: mac80211: drop some unprotected action frames") Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: cfg80211: Allow AP/P2PGO to indicate port authorization to peer ↵Vinayak Yadawad1-2/+6
STA/P2PClient In 4way handshake offload, cfg80211_port_authorized enables driver to indicate successful 4way handshake to cfg80211 layer. Currently this path of port authorization is restricted to interface type NL80211_IFTYPE_STATION and NL80211_IFTYPE_P2P_CLIENT. This patch extends the support for NL80211_IFTYPE_AP and NL80211_IFTYPE_P2P_GO interfaces to authorize peer STA/P2P_CLIENT, whenever authentication is offloaded on the AP/P2P_GO interface. Signed-off-by: Vinayak Yadawad <[email protected]> Link: https://lore.kernel.org/r/dee3b0a2b4f617e932c90bff4504a89389273632.1695721435.git.vinayak.yadawad@broadcom.com Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: mac80211: rename struct cfg80211_rx_assoc_resp to ↵Kalle Valo1-4/+4
cfg80211_rx_assoc_resp_data make htmldocs warns: Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251. Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'. This is because there's a function named cfg80211_rx_assoc_resp() and a struct named cfg80211_rx_assoc_resp, see previous patch for more info. To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The parameter for the function is named 'data' anyway so the naming here is consistent. Compile tested only. Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()Kalle Valo1-15/+15
make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/[email protected]/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: remove unused argument of ieee80211_get_tdls_action()Dmitry Antipov1-2/+1
Remove unused 'hdr_size' argument of 'ieee80211_get_tdls_action()' and adjust 'ieee80211_report_used_skb()' accordingly. Signed-off-by: Dmitry Antipov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: nl80211: fix doc typosRandy Dunlap1-2/+2
Correct some typos. Signed-off-by: Randy Dunlap <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Kalle Valo <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: mac80211: fix header kernel-doc typosRandy Dunlap1-14/+14
Correct typos and fix run-on sentences. Signed-off-by: Randy Dunlap <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Kalle Valo <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: cfg80211: fix header kernel-doc typosRandy Dunlap1-10/+10
Correct spelling of several words. Signed-off-by: Randy Dunlap <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Kalle Valo <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: mac80211: add link id to mgd_prepare_tx()Miri Korenblit1-0/+3
As we are moving to MLO and links terms, also the airtime protection will be done for a link rather than for a vif. Thus, some drivers will need to know for which link to protect airtime. Add link id as a parameter to the mgd_prepare_tx() callback. Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.c7fc59a6780b.Ic88a5037d31e184a2dce0b031ece1a0a93a3a9da@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: mac80211: make mgd_protect_tdls_discover MLO-awareMiri Korenblit1-1/+2
Since userspace can choose now what link to establish the TDLS on, we should know on what channel to do session protection. Add a link id parameter to this callback. Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.ef12ce3eb835.If864f406cfd9e24f36a2b88fd13a37328633fcf9@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: cfg80211: Fix typo in documentationIlan Peer1-1/+1
Fix a small typo in a comment. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.9dce226e393f.I929bfb9371e31c9e8d2bb1c1a96e9b1f3d02f2d0@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: mac80211: Rename and update IEEE80211_VIF_DISABLE_SMPS_OVERRIDEIlan Peer1-3/+3
EMLSR operation and SMPS operation cannot coexist. Thus, when EMLSR is enabled, all SMPS signaling towards the AP should be stopped (it is expected that the AP will consider SMPS to be off). Rename IEEE80211_VIF_DISABLE_SMPS_OVERRIDE to IEEE80211_VIF_EML_ACTIVE and use the flag as an indication from the driver that EMLSR is enabled. When EMLSR is enabled SMPS flows towards the AP MLD should be stopped. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.fb2c2f9a0645.If6df5357568abd623a081f0f33b07e63fb8bba99@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-10-23wifi: mac80211: add a driver callback to add vif debugfsMiri Korenblit1-0/+6
Add a callback which the driver can use to add the vif debugfs. We used to have this back until commit d260ff12e776 ("mac80211: remove vif debugfs driver callbacks") where we thought that it will be easier to just add them during interface add/remove. However, now with multi-link, we want to have proper debugfs for drivers for multi-link where some files might be in the netdev for non-MLO connections, and in the links for MLO ones, so we need to do some reconstruction when switching the mode. Moving to this new call enables that and MLO drivers will have to use it for proper debugfs operation. Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.ac38913f6ab7.Iee731d746bb08fcc628fa776f337016a12dc62ac@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-10-23Merge tag 'v6.6-rc7' into sched/core, to pick up fixesIngo Molnar39-47/+118
Pick up recent sched/urgent fixes merged upstream. Signed-off-by: Ingo Molnar <[email protected]>
2023-10-23tcp: add TCPI_OPT_USEC_TSEric Dumazet1-0/+1
Add the ability to report in tcp_info.tcpi_options if a flow is using usec resolution in TCP TS val. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: add support for usec resolution in TCP TS valuesEric Dumazet3-4/+9
Back in 2015, Van Jacobson suggested to use usec resolution in TCP TS values. This has been implemented in our private kernels. Goals were : 1) better observability of delays in networking stacks. 2) better disambiguation of events based on TSval/ecr values. 3) building block for congestion control modules needing usec resolution. Back then we implemented a schem based on private SYN options to negotiate the feature. For upstream submission, we chose to use a route attribute, because this feature is probably going to be used in private networks [1] [2]. ip route add 10/8 ... features tcp_usec_ts Note that RFC 7323 recommends a "timestamp clock frequency in the range 1 ms to 1 sec per tick.", but also mentions "the maximum acceptable clock frequency is one tick every 59 ns." [1] Unfortunately RFC 7323 5.5 (Outdated Timestamps) suggests to invalidate TS.Recent values after a flow was idle for more than 24 days. This is the part making usec_ts a problem for peers following this recommendation for long living idle flows. [2] Attempts to standardize usec ts went nowhere: https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf https://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/ Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: introduce TCP_PAWS_WRAPEric Dumazet1-2/+7
tcp_paws_check() uses TCP_PAWS_24DAYS constant to detect if TCP TS values might have wrapped after a long idle period. This mechanism is described in RFC 7323 5.5 (Outdated Timestamps) TCP_PAWS_24DAYS value was based on the assumption of a clock of 1 Khz. As we want to adopt a 1 Mhz clock in the future, we reduce this constant. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: add RTAX_FEATURE_TCP_USEC_TSEric Dumazet2-7/+16
This new dst feature flag will be used to allow TCP to use usec based timestamps instead of msec ones. ip route .... feature tcp_usec_ts Also document that RTAX_FEATURE_SACK and RTAX_FEATURE_TIMESTAMP are unused. RTAX_FEATURE_ALLFRAG is also going away soon. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: rename tcp_time_stamp() to tcp_time_stamp_ts()Eric Dumazet1-5/+4
This helper returns a TSval from a TCP socket. It currently calls tcp_time_stamp_ms() but will soon be able to return a usec based TSval, depending on an upcoming tp->tcp_usec_ts field. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: move tcp_ns_to_ts() to net/ipv4/syncookies.cEric Dumazet1-6/+0
tcp_ns_to_ts() is only used once from cookie_init_timestamp(). Also add the 'bool usec_ts' parameter to enable usec TS later. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: rename tcp_skb_timestamp()Eric Dumazet1-5/+9
This helper returns a 32bit TCP TSval from skb->tstamp. As we are going to support usec or ms units soon, rename it to tcp_skb_timestamp_ts() and add a boolean to select the unit. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: replace tcp_time_stamp_raw()Eric Dumazet1-6/+19
In preparation of usec TCP TS support, remove tcp_time_stamp_raw() in favor of tcp_clock_ts() helper. This helper will return a suitable 32bit result to feed TS values, depending on a socket field. Also add tcp_tw_tsval() and tcp_rsk_tsval() helpers to factorize the details. We do not yet support usec timestamps. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: introduce tcp_clock_ms()Eric Dumazet1-0/+5
It delivers current TCP time stamp in ms unit, and is used in place of confusing tcp_time_stamp_raw() It is the same family than tcp_clock_ns() and tcp_clock_ms(). tcp_time_stamp_raw() will be replaced later for TSval contexts with a more descriptive name. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: add tcp_time_stamp_ms() helperEric Dumazet1-0/+5
In preparation of adding usec TCP TS values, add tcp_time_stamp_ms() for contexts needing ms based values. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23tcp: fix cookie_init_timestamp() overflowsEric Dumazet1-1/+1
cookie_init_timestamp() is supposed to return a 64bit timestamp suitable for both TSval determination and setting of skb->tstamp. Unfortunately it uses 32bit fields and overflows after 2^32 * 10^6 nsec (~49 days) of uptime. Generated TSval are still correct, but skb->tstamp might be set far away in the past, potentially confusing other layers. tcp_ns_to_ts() is changed to return a full 64bit value, ts and ts_now variables are changed to u64 type, and TSMASK is removed in favor of shifts operations. While we are at it, change this sequence: ts >>= TSBITS; ts--; ts <<= TSBITS; ts |= options; to: ts -= (1UL << TSBITS); Fixes: 9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23BackMerge tag 'v6.6-rc7' into drm-nextDave Airlie70-170/+233
This is needed to add the msm pr which is based on a higher base. Signed-off-by: Dave Airlie <[email protected]>
2023-10-23ipv6: add new arguments to udp_tunnel6_dst_lookup()Beniamino Galvani1-3/+4
We want to make the function more generic so that it can be used by other UDP tunnel implementations such as geneve and vxlan. To do that, add the following arguments: - source and destination UDP port; - ifindex of the output interface, needed by vxlan; - the tos, because in some cases it is not taken from struct ip_tunnel_info (for example, when it's inherited from the inner packet); - the dst cache, because not all tunnel types (e.g. vxlan) want to use the one from struct ip_tunnel_info. With these parameters, the function no longer needs the full struct ip_tunnel_info as argument and we can pass only the relevant part of it (struct ip_tunnel_key). This is similar to what already done for IPv4 in commit 72fc68c6356b ("ipv4: add new arguments to udp_tunnel_dst_lookup()"). Suggested-by: Guillaume Nault <[email protected]> Signed-off-by: Beniamino Galvani <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23ipv6: remove "proto" argument from udp_tunnel6_dst_lookup()Beniamino Galvani1-1/+1
The function is now UDP-specific, the protocol is always IPPROTO_UDP. This is similar to what already done for IPv4 in commit 78f3655adcb5 ("ipv4: remove "proto" argument from udp_tunnel_dst_lookup()"). Suggested-by: Guillaume Nault <[email protected]> Signed-off-by: Beniamino Galvani <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23ipv6: rename and move ip6_dst_lookup_tunnel()Beniamino Galvani2-6/+7
At the moment ip6_dst_lookup_tunnel() is used only by bareudp. Ideally, other UDP tunnel implementations should use it, but to do so the function needs to accept new parameters that are specific for UDP tunnels, such as the ports. Prepare for these changes by renaming the function to udp_tunnel6_dst_lookup() and move it to file net/ipv6/ip6_udp_tunnel.c. This is similar to what already done for IPv4 in commit bf3fcbf7e7a0 ("ipv4: rename and move ip_route_output_tunnel()"). Suggested-by: Guillaume Nault <[email protected]> Signed-off-by: Beniamino Galvani <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22bcachefs: Update export_operations for snapshotsKent Overstreet1-0/+6
When support for snapshots was merged, export operations weren't updated yet. This patch adds new filehandle types for bcachefs that include the subvolume ID and updates export operations for subvolumes - and also .get_parent, support for which was added just prior to snapshots. Signed-off-by: Kent Overstreet <[email protected]>
2023-10-21Merge tag 'perf-urgent-2023-10-21' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events fix from Ingo Molnar: "Fix group event semantics" * tag 'perf-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Disallow mis-matched inherited group reads
2023-10-21nvmem: add explicit config option to read old syntax fixed OF cellsRafał Miłecki1-0/+2
Binding for fixed NVMEM cells defined directly as NVMEM device subnodes has been deprecated. It has been replaced by the "fixed-layout" NVMEM layout binding. New syntax is meant to be clearer and should help avoiding imprecise bindings. NVMEM subsystem already supports the new binding. It should be a good idea to limit support for old syntax to existing drivers that actually support & use it (we can't break backward compatibility!). That way we additionally encourage new bindings & drivers to ignore deprecated binding. It wasn't clear (to me) if rtc and w1 code actually uses old syntax fixed cells. I enabled them to don't risk any breakage. Signed-off-by: Rafał Miłecki <[email protected]> [for meson-{efuse,mx-efuse}.c] Acked-by: Martin Blumenstingl <[email protected]> [for mtk-efuse.c, nvmem/core.c, nvmem-provider.h] Reviewed-by: AngeloGioacchino Del Regno <[email protected]> [MT8192, MT8195 Chromebooks] Tested-by: AngeloGioacchino Del Regno <[email protected]> [for microchip-otpc.c] Reviewed-by: Claudiu Beznea <[email protected]> [SAMA7G5-EK] Tested-by: Claudiu Beznea <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.