| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Tegra SoC and clock controller changes for v5.11
Export symbols and add stubs necessary for upcoming modified Tegra
memory controller drivers (touching also devfreq and interconnect).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
0day reported one -22.7% regression for will-it-scale page_fault2
case [1] on a 4 sockets 144 CPU platform, and bisected to it to be
caused by Waiman's optimization (commit bd0b230fe1) of saving one
'struct page_counter' space for 'struct mem_cgroup'.
Initially we thought it was due to the cache alignment change introduced
by the patch, but further debug shows that it is due to some hot data
members ('vmstats_local', 'vmstats_percpu', 'vmstats') sit in 2 adjacent
cacheline (2N and 2N+1 cacheline), and when adjacent cache line prefetch
is enabled, it triggers an "extended level" of cache false sharing for
2 adjacent cache lines.
So exchange the 2 member blocks, while keeping mostly the original
cache alignment, which can restore and even enhance the performance,
and save 64 bytes of space for 'struct mem_cgroup' (from 2880 to 2816,
with 0day's default RHEL-8.3 kernel config)
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Fixes: bd0b230fe145 ("mm/memcg: unify swap and memsw page counters")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Feng Tang <[email protected]>
Acked-by: Waiman Long <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
|
|
This adds the MIPI DSI Host Pixel Clock bindings.
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-Top Box
used by O2.cz. This keymap adds support for the default IR controls.
Signed-off-by: Christian Hewitt <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The SoundWire 1.1 specification only allowed for reads and writes of
bytes. The SoundWire 1.2 specification adds a new capability to
transfer "Multi-Byte Quantities" (MBQ) across the bus. The transfers
still happens one-byte-at-a-time, but the update is atomic.
For example when writing a 16-bit volume, the first byte transferred
is only taken into account when the second byte is successfully
transferred.
The mechanism is symmetrical for read and writes:
- On a read, the address of the last byte to be read is modified by
setting the MBQ bit
- On a write, the address of all but the last byte to be written are
modified by setting the MBQ bit. The address for the last byte relies
on the MBQ bit being cleared.
The current definitions for MBQ-based controls in the SDCA draft
standard are limited to 16 bits for volumes, so for now this is the
only supported format. An update will be provided if and when support
for 24-bit and 32-bit values is specified by the SDCA standard.
One possible objection is that this code could have been handled with
regmap-sdw.c. However this is a new spec addition not handled by every
SoundWire 1.1 and non-SDCA device, so there's no reason to load code
that will never be used.
Also in practice it's extremely unlikely that CONFIG_REGMAP would not
be selected with CONFIG_REGMAP_MBQ selected. However there's no
functional dependency between the two modules so they can be selected
separately.
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Reviewed-by: Vinod Koul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The upcoming SDCA (SoundWire Device Class Audio) specification defines
a hierarchical encoding to interface with Class-defined capabilities.
The specification is not yet accessible to the general public but this
information is released with explicit permission from the MIPI Board
to avoid delays with SDCA support on Linux platforms.
A block of 64 MBytes of register addresses are allocated to SDCA
controls, starting at address 0x40000000. The 26 LSBs which identify
individual controls are set based on the following variables:
- Function Number. An SCDA device can be split in up to 8 independent
Functions. Each of these Functions is described in the SDCA
specification, e.g. Smart Amplifier, Smart Microphone, Simple
Microphone, Jack codec, HID, etc.
- Entity Number. Within each Function, an Entity is an identifiable
block. Up to 127 Entities are connected in a pre-defined
graph (similar to USB), with Entity0 reserved for Function-level
configurations. In contrast to USB, the SDCA spec pre-defines
Function Types, topologies, and allowed options, i.e. the degree of
freedom is not unlimited to limit the possibility of errors in
descriptors leading to software quirks.
- Control Selector. Within each Entity, the SDCA specification defines
48 controls such as Mute, Gain, AGC, etc, and 16 implementation
defined ones. Some Control Selectors might be used for low-level
platform setup, and other exposed to applications and users. Note
that the same Control Selector capability, e.g. Latency control,
might be located at different offsets in different entities, the
Control Selector mapping is Entity-specific.
- Control Number. Some Control Selectors allow channel-specific values
to be set, with up to 64 channels allowed. This is mostly used for
volume control.
- Current/Next values. Some Control Selectors are
'Dual-Ranked'. Software may either update the Current value directly
for immediate effect. Alternatively, software may write into the
'Next' values and update the SoundWire 1.2 'Commit Groups' register
to copy 'Next' values into 'Current' ones in a synchronized
manner. This is different from bank switching which is typically
used to change the bus configuration only.
- MBQ. the Multi-Byte Quantity bit is used to provide atomic updates
when accessing more that one byte, for example a 16-bit volume
control would be updated consistently, the intermediate values
mixing old MSB with new LSB are not applied.
These 6 parameters are used to build a 32-bit address to access the
desired Controls. Because of address range, paging is required, but
the most often used parameter values are placed in the lower 16 bits
of the address. This helps to keep the paging registers constant while
updating Controls for a specific Device/Function.
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add documentation for enum rc_proto and struct lirc_scancode
at the generated docs.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sean Young <[email protected]>
|
|
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
=> 3) snd_soc_link_compr_startup/shutdown()
This patch is for 3) snd_soc_link_compr_startup/shutdown()
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
=> 2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 2) snd_soc_component_compr_open/free(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
=> 1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 1) snd_soc_dai_compr_startup/shutdown(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
TD.4.7.3. Try SNK DRP Connect Try.SRC DRP fails. The compliance
tester mimics being a Try.SRC USB-C port.
The failure is due to TCPM exiting SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS
when VBUS is not present eventhough when SNK.Rp is seen. Exit to
SRC_TRYWAIT from SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS only when SNK.Rp
is not seen for PD_T_TRY_CC_DEBOUNCE.
>From the spec:
The port shall then transition to Attached.SNK when the SNK.Rp state
is detected on exactly one of the CC1 or CC2 pins for at least
tTryCCDebounce and VBUS is detected. Alternatively, the port shall
transition to TryWait.SRC if SNK.Rp state is not detected for
tTryCCDebounce.
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Further perf/core patches will depend on:
d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")
which is already in Linus' tree.
|
|
gpr_get() does membuf_write() twice to override pt_regs->msr in
between. We can call membuf_write() once and change ->msr in the
kernel buffer, this simplifies the code and the next fix.
The patch adds a new simple helper, membuf_at(offs), it returns the
new membuf which can be safely used after membuf_write().
Signed-off-by: Oleg Nesterov <[email protected]>
[mpe: Fixup some minor whitespace issues noticed by Christophe]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
USB Power Delivery Specification R3.0 introduced separate
field for the DFP product type to the ID Header VDO.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A new API, rproc_set_firmware() is added to allow the remoteproc platform
drivers and remoteproc client drivers to be able to configure a custom
firmware name that is different from the default name used during
remoteproc registration. This function is being introduced to provide
a kernel-level equivalent of the current sysfs interface to remoteproc
client drivers, and can only change firmwares when the remoteproc is
offline. This allows some remoteproc drivers to choose different firmwares
at runtime based on the functionality the remote processor is providing.
The TI PRU Ethernet driver will be an example of such usage as it
requires to use different firmwares for different supported protocols.
Also, update the firmware_store() function used by the sysfs interface
to reuse this function to avoid code duplication.
Reviewed-by: Rishabh Bhatnagar <[email protected]>
Signed-off-by: Suman Anna <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after
calling tls_dev_del if TLX TX offload is also enabled. Clearing
tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a
time frame when tls_device_down may get called and call tls_dev_del for
RX one extra time, confusing the driver, which may lead to a crash.
This patch corrects this racy behavior by adding a flag to prevent
tls_device_down from calling tls_dev_del the second time.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The current semantic for napi_consume_skb() is that caller need
to provide non-zero budget when calling from NAPI context, and
breaking this semantic will cause hard to debug problem, because
_kfree_skb_defer() need to run in atomic context in order to push
the skb to the particular cpu' napi_alloc_cache atomically.
So add the lockdep_assert_in_softirq() to assert when the running
context is not in_softirq, in_softirq means softirq is serving or
BH is disabled, which has a ambiguous semantics due to the BH
disabled confusion, so add a comment to emphasize that.
And the softirq context can be interrupted by hard IRQ or NMI
context, lockdep_assert_in_softirq() need to assert about hard
IRQ or NMI context too.
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Provide a wrapper function to get the IMA hash of an inode. This helper
is useful in fingerprinting files (e.g executables on execution) and
using these fingerprints in detections like an executable unlinking
itself.
Since the ima_inode_hash can sleep, it's only allowed for sleepable
LSM hooks.
Signed-off-by: KP Singh <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This is in preparation to add a helper for BPF LSM programs to use
IMA hashes when attached to LSM hooks. There are LSM hooks like
inode_unlink which do not have a struct file * argument and cannot
use the existing ima_file_hash API.
An inode based API is, therefore, useful in LSM based detections like an
executable trying to delete itself which rely on the inode_unlink LSM
hook.
Moreover, the ima_file_hash function does nothing with the struct file
pointer apart from calling file_inode on it and converting it to an
inode.
Signed-off-by: KP Singh <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Mimi Zohar <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Extend MRP to support LC mode(link check) for the interconnect port.
This applies only to the interconnect ring.
Opposite to RC mode(ring check) the LC mode is using CFM frames to
detect when the link goes up or down and based on that the userspace
will need to react.
One advantage of the LC mode over RC mode is that there will be fewer
frames in the normal rings. Because RC mode generates InTest on all
ports while LC mode sends CFM frame only on the interconnect port.
All 4 nodes part of the interconnect ring needs to have the same mode.
And it is not possible to have running LC and RC mode at the same time
on a node.
Whenever the MIM starts it needs to detect the status of the other 3
nodes in the interconnect ring so it would send a frame called
InLinkStatus, on which the clients needs to reply with their link
status.
This patch adds InLinkStatus frame type and extends existing rules on
how to forward this frame.
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: Horatiu Vultur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently both filter and action flags use same "TCA_" prefix which makes
them hard to distinguish to code and confusing for users. Create aliases
for existing action flags constants with "TCA_ACT_" prefix.
Signed-off-by: Vlad Buslov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now that all the PHY drivers have been migrated to directly implement
the generic .handle_interrupt() callback for a seamless support of
shared IRQs and all the .config_inter() implementations clear any
pending interrupts, we can safely remove the two callbacks.
With this patch, phylib has a proper support for shared IRQs (and not
just for multi-PHY devices. A PHY driver must implement both the
.handle_interrupt() and .config_intr() callbacks for the IRQs to be
actually used.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since commit 4b1faf931650 ("block: Kill bio_pair_split()"), there's
no user of BIO_SPLIT_ENTRIES anymore.
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.
Signed-off-by: Sumit Garg <[email protected]>
Acked-by: Alexandru Elisei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Clean up the module-param macros by adding some indentation and using
the __aligned() macro to improve readability.
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
|
|
Specify type alignment for kernel parameters instead of sizeof(void *).
The alignment attribute is used to prevent gcc from increasing the
alignment of objects with static extent as an optimisation, something
which would mess up the __param array stride.
Using __alignof__(struct kernel_param) rather than sizeof(void *) is
preferred since it better indicates why it is there and doesn't break
should the type size or alignment change.
Note that on m68k the alignment of struct kernel_param is actually two
and that adding a 1- or 2-byte field to the 20-byte struct would cause a
breakage with the current 4-byte alignment.
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
|
|
Drop the redundant "unused" attributes from module-parameter structures
already marked "used".
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
|
|
Instead of using the array-of-pointers trick to avoid having gcc mess up
the built-in module-version array stride, specify type alignment when
declaring entries to prevent gcc from increasing alignment.
This is essentially an alternative (one-line) fix to the problem
addressed by commit b4bc842802db ("module: deal with alignment issues in
built-in module versions").
gcc can increase the alignment of larger objects with static extent as
an optimisation, but this can be suppressed by using the aligned
attribute when declaring variables.
Note that we have been relying on this behaviour for kernel parameters
for 16 years and it indeed hasn't changed since the introduction of the
aligned attribute in gcc-3.1.
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
|
|
Commit 98562ad8cb03 ("module: explicitly align module_version_attribute
structure") added an alignment attribute to the struct
module_version_attribute type in order to fix an alignment issue on m68k
where the structure is 2-byte aligned while MODULE_VERSION() forced the
__modver section entries to be 4-byte aligned (sizeof(void *)).
This was essentially an alternative fix to the problem addressed by
b4bc842802db ("module: deal with alignment issues in built-in module
versions") which used the array-of-pointer trick to prevent gcc from
increasing alignment of the version attribute entries. And with the
pointer indirection in place there's no need to increase the alignment
of the type.
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
|
|
The enum rc_proto value RC_PROTO_MAX has no documentation, this is causing
a warning while building the documentation.
Fixes: 72e637fec558 ("media: rc: validate that "rc_proto" is reasonable")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add a quirk IO_PGTABLE_QUIRK_ARM_OUTER_WBWA to override
the outer-cacheability attributes set in the TCR for a
non-coherent page table walker when using system cache.
Signed-off-by: Sai Prakash Ranjan <[email protected]>
Link: https://lore.kernel.org/r/f818676b4a2a9ad1edb92721947d47db41ed6a7c.1606287059.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <[email protected]>
|
|
Add a new iommu domain attribute DOMAIN_ATTR_IO_PGTABLE_CFG
for pagetable configuration which initially will be used to
set quirks like for system cache aka last level cache to be
used by client drivers like GPU to set right attributes for
caching the hardware pagetables into the system cache and
later can be extended to include other page table configuration
data.
Signed-off-by: Sai Prakash Ranjan <[email protected]>
Link: https://lore.kernel.org/r/9190aa16f378fc0a7f8e57b2b9f60b033e7eeb4f.1606287059.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <[email protected]>
|
|
Add a iommu_dma_free_cpu_cached_iovas function to allow drivers which
use the dma-iommu ops to free cached cpu iovas.
Signed-off-by: Tom Murphy <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Tested-by: Logan Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Allow the iommu_unmap_fast to return newly freed page table pages and
pass the freelist to queue_iova in the dma-iommu ops path.
This is useful for iommu drivers (in this case the intel iommu driver)
which need to wait for the ioTLB to be flushed before newly
free/unmapped page table pages can be freed. This way we can still batch
ioTLB free operations and handle the freelists.
Signed-off-by: Tom Murphy <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Tested-by: Logan Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The bdi_dev_name() returns a char [64], and
the __entry->name is a char [32].
It maybe dangerous to TP_printk("%s", __entry->name)
after the strncpy().
CC: [email protected]
Link: https://lore.kernel.org/r/20201124165205.GA23937@rlk
Acked-by: Steven Rostedt (VMware) <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Hui Su <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
|
|
This file content describes memory allocation status
at run-time, typically to detect memory leaks.
Signed-off-by: Karol Trzcinski <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Section comment should be coherent with IPC prefix from define
names.
Signed-off-by: Karol Trzcinski <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Each define value in series should be aligned and tabs should
be used instead of spaces to follow code-style.
Signed-off-by: Karol Trzcinski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Values given in this dictionary describes used firmware configuration,
like feature availability, buffer size limits and similar properties.
Signed-off-by: Karol Trzcinski <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
DP0 has reserved fields and the read-only SDCA_CASCADE bit. We should
not try to write values in these fields, so add a formal definition
for clearable interrupts to be used in DP0 interrupt handling.
DPN also has reserved fields so add definitions for clearable
interrupts as well.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Add clock id forc CE clock resource which is required to bring up the
crypto engine on sdm845.
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Thara Gopinath <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
A copy-pasta mistake tries to set SYSCALL_WORK flags instead of TIF
flags for !CONFIG_GENERIC_ENTRY. Also, add safeguards to catch this at
compilation time.
Fixes: 3136b93c3fb2 ("entry: Expose helpers to migrate TIF to SYSCALL_WORK flags")
Reported-by: Naresh Kamboju <[email protected]>
Suggested-by: Jann Horn <[email protected]>
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In an encrypted directory, a regular dentry (one that doesn't have the
no-key name flag) can only be created if the directory's encryption key
is available.
Therefore the calls to fscrypt_require_key() in __fscrypt_prepare_link()
and __fscrypt_prepare_rename() are unnecessary, as these functions
already check that the dentries they're given aren't no-key names.
Remove these unnecessary calls to fscrypt_require_key().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
|
|
It's possible to create a duplicate filename in an encrypted directory
by creating a file concurrently with adding the encryption key.
Specifically, sys_open(O_CREAT) (or sys_mkdir(), sys_mknod(), or
sys_symlink()) can lookup the target filename while the directory's
encryption key hasn't been added yet, resulting in a negative no-key
dentry. The VFS then calls ->create() (or ->mkdir(), ->mknod(), or
->symlink()) because the dentry is negative. Normally, ->create() would
return -ENOKEY due to the directory's key being unavailable. However,
if the key was added between the dentry lookup and ->create(), then the
filesystem will go ahead and try to create the file.
If the target filename happens to already exist as a normal name (not a
no-key name), a duplicate filename may be added to the directory.
In order to fix this, we need to fix the filesystems to prevent
->create(), ->mkdir(), ->mknod(), and ->symlink() on no-key names.
(->rename() and ->link() need it too, but those are already handled
correctly by fscrypt_prepare_rename() and fscrypt_prepare_link().)
In preparation for this, add a helper function fscrypt_is_nokey_name()
that filesystems can use to do this check. Use this helper function for
the existing checks that fs/crypto/ does for rename and link.
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
|
|
Commit 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
addressed the problem that packets were discarded from the Tx AF_XDP
ring, when the driver returned NETDEV_TX_BUSY. Part of the fix was
bumping the skbuff reference count, so that the buffer would not be
freed by dev_direct_xmit(). A reference count larger than one means
that the skbuff is "shared", which is not the case.
If the "shared" skbuff is sent to the generic XDP receive path,
netif_receive_generic_xdp(), and pskb_expand_head() is entered the
BUG_ON(skb_shared(skb)) will trigger.
This patch adds a variant to dev_direct_xmit(), __dev_direct_xmit(),
where a user can select the skbuff free policy. This allows AF_XDP to
avoid bumping the reference count, but still keep the NETDEV_TX_BUSY
behavior.
Fixes: 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
Reported-by: Yonghong Song <[email protected]>
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fix reload stats structure exposed to the user. Change stats structure
hierarchy to have the reload action as a parent of the stat entry and
then stat entry includes value per limit. This will also help to avoid
string concatenation on iproute2 output.
Reload stats structure before this fix:
"stats": {
"reload": {
"driver_reinit": 2,
"fw_activate": 1,
"fw_activate_no_reset": 0
}
}
After this fix:
"stats": {
"reload": {
"driver_reinit": {
"unspecified": 2
},
"fw_activate": {
"unspecified": 1,
"no_reset": 0
}
}
Fixes: a254c264267e ("devlink: Add reload stats")
Signed-off-by: Moshe Shemesh <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a packet trap to report packets that were dropped due to a
blackhole nexthop.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Prelude to gssapi support
Here are some patches that do some reorganisation of the security class
handling in rxrpc to allow implementation of the RxGK security class that
will allow AF_RXRPC to use GSSAPI-negotiated tokens and better crypto. The
RxGK security class is not included in this patchset.
It does the following things:
(1) Add a keyrings patch to provide the original key description, as
provided to add_key(), to the payload preparser so that it can
interpret the content on that basis. Unfortunately, the rxrpc_s key
type wasn't written to interpret its payload as anything other than a
string of bytes comprising a key, but for RxGK, more information is
required as multiple Kerberos enctypes are supported.
(2) Remove the rxk5 security class key parsing. The rxk5 class never got
rolled out in OpenAFS and got replaced with rxgk.
(3) Support the creation of rxrpc keys with multiple tokens of different
types. If some types are not supported, the ENOPKG error is
suppressed if at least one other token's type is supported.
(4) Punt the handling of server keys (rxrpc_s type) to the appropriate
security class.
(5) Organise the security bits in the rxrpc_connection struct into a
union to make it easier to override for other classes.
(6) Move some bits from core code into rxkad that won't be appropriate to
rxgk.
* tag 'rxrpc-next-20201123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
rxrpc: Ask the security class how much space to allow in a packet
rxrpc: rxkad: Don't use pskb_pull() to advance through the response packet
rxrpc: Organise connection security to use a union
rxrpc: Don't reserve security header in Tx DATA skbuff
rxrpc: Merge prime_packet_security into init_connection_security
rxrpc: Fix example key name in a comment
rxrpc: Ignore unknown tokens in key payload unless no known tokens
rxrpc: Make the parsing of xdr payloads more coherent
rxrpc: Allow security classes to give more info on server keys
rxrpc: Don't leak the service-side session key to userspace
rxrpc: Hand server key parsing off to the security class
rxrpc: Split the server key type (rxrpc_s) into its own file
rxrpc: Don't retain the server key in the connection
rxrpc: Support keys with multiple authentication tokens
rxrpc: List the held token types in the key description in /proc/keys
rxrpc: Remove the rxk5 security class as it's now defunct
keys: Provide the original description to the key preparser
====================
Link: https://lore.kernel.org/r/160616220405.830164.2239716599743995145.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This controller provides DMAengine capabilities for a variety of peripheral
buses such as I2C, UART, and SPI. By using GPI dmaengine driver, bus
drivers can use a standardize interface that is protocol independent to
transfer data between memory and peripheral.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|