| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
fbdev driver is for an Intel product which was never shipped, and for
the intelfb and the amba-clcd drivers the drm drivers can be used
instead.
The other code changes are minor: some fb_deferred_io flushing fixes,
imxfb margin fixes and stifb cleanups.
Summary:
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)"
* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
fbdev/intelfb: Remove driver
fbdev/hyperv_fb: Do not clear global screen_info
firmware/sysfb: Clear screen_info state after consuming it
fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
drm/hyperv: Remove firmware framebuffers with aperture helper
fbdev/sis: Remove dependency on screen_info
video/logo: use %u format specifier for unsigned int values
video/sticore: Remove info field from STI struct
arch/parisc: Detect primary video device from device instance
fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
video/sticore: Store ROM device in STI struct
fbdev: flush deferred IO before closing
fbdev: flush deferred work in fb_deferred_io_fsync()
fbdev: amba-clcd: Delete the old CLCD driver
fbdev: Remove support for Carillo Ranch driver
fbdev: hgafb: fix kernel-doc comments
fbdev: mmp: Fix typo and wording in code comment
fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
fbdev: imxfb: add '*/' on a separate line in block comment
fbdev: imxfb: use __func__ for function name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Don't force a retune before eMMC RPMB switch
- Add optional HS400 tuning in HS400es initialization
- Add a sysfs node to for write-protect-group-size
- Add re-tuning test to the mmc-test module
- Use mrq.sbc to support close-ended ioctl requests
MMC host:
- mmci: Add support for SDIO in-band irqs for the stm32 variant
- mmc_spi: Remove broken support custom DMA mapped buffers
- mtk-sd: Improve and extend the support for tunings
- renesas_sdhi: Document support for the RZ/Five variant
- sdhci_am654: Drop support for the ti,otap-del-sel DT property
- sdhci-brcmstb: Add support for the brcm 74165b0 variant
- sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
- sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
- sdhci-xenon: Add support for the Marvell ac5 variant"
* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: xenon: Add ac5 support via bounce buffer
dt-bindings: mmc: add Marvell ac5
mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
mmc: core: Do not force a retune before RPMB switch
mmc: core: Add HS400 tuning in HS400es initialization
mmc: sdhci_omap: Fix TI SoC dependencies
mmc: sdhci_am654: Fix TI SoC dependencies
mmc: core: Add wp_grp_size sysfs node
mmc: mmc_test: Add re-tuning test
mmc: mmc_spi: remove custom DMA mapped buffers
dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
mmc: mtk-sd: Extend number of tuning steps
dt-bindings: mmc: mtk-sd: add tuning steps related property
mmc: sdhci-omap: don't misuse kernel-doc marker
mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
mmc: core: Use mrq.sbc in close-ended ffu
mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Move the generic PM domain and its governor to the pmdomain
subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd"
* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Move genpd and its governor to the pmdomain subsystem
PM: domains: Drop redundant header for genpd
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
PM: domains: fix domain_governor kernel-doc warnings
pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
pmdomain: qcom-cpr: Convert to platform remove callback returning void
pmdomain: imx93-pd: Convert to platform remove callback returning void
pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx-gpcv2: Convert to platform remove callback returning void
pmdomain: imx-gpc: Convert to platform remove callback returning void
pmdomain: imx-pgc: Convert to platform remove callback returning void
pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
dt-bindings: power: meson-g12a-power: document ISP power domain
firmware: arm_scpi: Move power-domain driver to the pmdomain dir
pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
pmdomain: qcom: rpmhpd: Update part number to X1E80100
dt-bindings: power: rpmpd: Update part number to X1E80100
|
|
Pull rdma updates from Jason Gunthorpe:
"Small cycle, with some typical driver updates:
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and
bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast
list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()
RDMA/efa: Add EFA query MR support
IB/iser: Prevent invalidating wrong MR
RDMA/erdma: Add hardware statistics support
RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests
IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos
RDMA/mana_ib: Add CQ interrupt support for RAW QP
RDMA/mana_ib: query device capabilities
RDMA/mana_ib: register RDMA device with GDMA
RDMA/bnxt_re: Fix the sparse warnings
RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications
RDMA/bnxt_re: Share a page to expose per CQ info with userspace
RDMA/bnxt_re: Add UAPI to share a page with user space
IB/ipoib: Fix mcast list locking
RDMA/mlx5: Expose register c0 for RDMA device
net/mlx5: E-Switch, expose eswitch manager vport
net/mlx5: Manage ICM type of SW encap
RDMA/mlx5: Support handling of SW encap ICM area
net/mlx5: Introduce indirect-sw-encap ICM properties
RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This includes the series of changes related to device attributes, as
well as slight code refactoring.
Some old devices are recognized to have legacy layout of configuration
ROM. They have an inconvenience that FireWire subsystem adds no
attributes for vendor information to corresponding devices. The main
purpose of this update is to rectify the inconvenience.
We have a slight concern about regression. The update changes the
value of modalias for the unit devices by populating its model field,
which was previously left as zero in the case. I've assessed the
potential impact of this change and anticipate it to have minimal
concern for both the kernel and user lands. The change is enough
acceptable"
* tag 'firewire-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fill model field in modalias of unit device for legacy layout of configuration ROM
firewire: core: detect model name for legacy layout of configuration ROM
firewire: core: detect numeric model identifier for legacy layout of configuration ROM
firewire: test: add test of device attributes for legacy AV/C device
firewire: test: add test of device attributes for simple AV/C device
firewire: test: add KUnit test for device attributes
firewire: core: replace magic number with macro
firewire: core: adds constant qualifier for local helper functions
firewire: make fw_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, an assortment of updates and cleanups to many
others, and first part of the big rework of the core GPIOLIB that's
currently underway.
Add to that some code shrink in the character device module and
updates to DT bindings and that's pretty much it.
Core GPIOLIB:
- protect the global list of GPIO devices with a read-write semaphore
as it is rarely modified but can be traversed by multiple readers
at once
- remove GPIO devices from the global list when they are
*unregistered* and not when they are *released* (which only happens
when the last reference is dropped) as this may lead to a
successful lookup of an unregistered device
- remove the unnecessary "extra_checks" switch
- rename functions that are called with a lock taken
- remove duplicate includes
Character device handling:
- use locking guards to reduce the code size
- allocate the big linereq structure using the more suitable
kvzalloc()
- redulce the size of critical sections
- improve documentation
- move the debounce_period_us field out of struct gpio_desc
New drivers:
- Nuvoton NPCM SGPIO driver for BMC NPCM7xx/NPCM8xx
- Realtek DHC (Digital Home Center) SoC GPIO driver
Driver improvements:
- replace gpiochip_is_requested() with a safer alternative in the
form of gpiochip_dup_line_label() as the former returns a pointer
to a string that can be deleted
- implement the dbg_show() callback in gpio-sim
- improve the coding style for local variables by removing
unnecessary tabs
- use generic device properties instead of OF variants in gpio-mmio
- use the preferred coding style for __free() in gpio-mockup
- reuse PM ops from the gpio-tangier in gpio-elkhartlake
- rework PM and use cleanup helpers in gpio-tangier
- fix the EIC configuration in gpio-pmic-eic-sprd
- remove the unneeded call to platform_set_drvdata() in gpio-sifive
- use generic GPIO helpers for driver callbacks in gpio-dwapb
- add clock support on certain pins of gpio-ixp4xx
- don't use the core-specific DEBUG_GPIO switch in drivers
- kerneldoc improvements
DT bindings:
- add bindings for the new Realtek and Nuvoton devices
- allow gpio-ranges in gpio-dwapb
- support GPIO hogs in gpio-rockchip
- describe the label property in gpio-zynqmp-modepin
Other:
- header cleanups
- forward declarations cleanups"
* tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpiolib: replace the GPIO device mutex with a read-write semaphore
gpiolib: remove the GPIO device from the list when it's unregistered
gpio: nuvoton: Add Nuvoton NPCM sgpio driver
dt-bindings: gpio: add NPCM sgpio driver bindings
gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCs
dt-bindings: gpio: realtek: Add realtek,rtd-gpio
gpio: pmic-eic-sprd: Configure the bit corresponding to the EIC through offset
gpio: dwapb: Use generic request, free and set_config
gpio: sysfs: drop tabs from local variable declarations
gpiolib: drop tabs from local variable declarations
gpiolib: remove extra_checks
gpio: tps65219: don't use CONFIG_DEBUG_GPIO
gpiolib: cdev: replace locking wrappers for gpio_device with guards
gpiolib: cdev: replace locking wrappers for config_mutex with guards
gpiolib: cdev: allocate linereq using kvzalloc()
gpiolib: cdev: include overflow.h
gpiolib: cdev: reduce locking in gpio_desc_to_lineinfo()
gpiolib: cdev: improve documentation of get/set values
gpiolib: cdev: fully adopt guard() and scoped_guard()
gpiolib: remove debounce_period_us from struct gpio_desc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
|
|
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
|
Some *thermal_cooling_device_register() calls pass a string literal as
the 'type' parameter, so kstrdup_const() can be used instead of
kstrdup() to avoid a memory allocation in such cases.
Signed-off-by: Christophe JAILLET <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The thermal framework does not have any debug information except a
sysfs stat which is a bit controversial. This one allocates big chunks
of memory for every cooling devices with a high number of states and
could represent on some systems in production several megabytes of
memory for just a portion of it. As the sysfs is limited to a page
size, the output is not exploitable with large data array and gets
truncated.
The patch provides the same information than sysfs except the
transitions are dynamically allocated, thus they won't show more
events than the ones which actually occurred. There is no longer a
size limitation and it opens the field for more debugging information
where the debugfs is designed for, not sysfs.
The thermal debugfs directory structure tries to stay consistent with
the sysfs one but in a very simplified way:
thermal/
-- cooling_devices
|-- 0
| |-- clear
| |-- time_in_state_ms
| |-- total_trans
| `-- trans_table
|-- 1
| |-- clear
| |-- time_in_state_ms
| |-- total_trans
| `-- trans_table
|-- 2
| |-- clear
| |-- time_in_state_ms
| |-- total_trans
| `-- trans_table
|-- 3
| |-- clear
| |-- time_in_state_ms
| |-- total_trans
| `-- trans_table
`-- 4
|-- clear
|-- time_in_state_ms
|-- total_trans
`-- trans_table
The content of the files in the cooling devices directory is the same
as the sysfs one except for the trans_table which has the following
format:
Transition Hits
1->0 246
0->1 246
2->1 632
1->2 632
3->2 98
2->3 98
Signed-off-by: Daniel Lezcano <[email protected]>
[ rjw: White space fixups, rebase ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The depency of FANOTIFY_ACCESS_PERMISSIONS on SECURITY made sure that
the fsnotify permission hooks were never called when SECURITY was
disabled.
Moving the fsnotify permission hook out of the secutiy hook broke that
optimisation.
Reported-and-tested-by: Jens Axboe <[email protected]>
Closes: https://lore.kernel.org/linux-fsdevel/[email protected]/
Fixes: d9e5d31084b0 ("fsnotify: optionally pass access range in file permission hooks")
Signed-off-by: Amir Goldstein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
The info field in struct sti_struct was used to detect the default
display device. That test is now done with the respective Linux device
and the info field is unused. Remove it.
Signed-off-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
Store the ROM's parent device in each STI struct, so we can associate
the STI framebuffer with a device.
The new field will eventually replace the fbdev subsystem's info field,
which the function fb_is_primary_device() currently requires to detect
the firmware's output. By using the device instead of the framebuffer
info, a later patch can generalize the helper for use in non-fbdev code.
Signed-off-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
We have managed to ascertain that all users of the old FBDEV
code that are out of tree are now gone.
The new DRM driver can be found in drivers/gpu/drm/pl111/.
The remaining out of tree user was the ARM FVP emulation
platform, running Android. Thanks to changes in Android
versions 13 and 14, Android can now use the DRM driver when
being emulated under FVP. Some final patches are being put
in place to make it fully featured.
This is essentially a revert of the partial revert in
commit 112c35237c72 ("Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver"")
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs update from Jaegeuk Kim:
"In this series, we've some progress to support Zoned block device
regarding to the power-cut recovery flow and enabling
checkpoint=disable feature which is essential for Android OTA.
Other than that, some patches touched sysfs entries and tracepoints
which are minor, while several bug fixes on error handlers and
compression flows are good to improve the overall stability.
Enhancements:
- enable checkpoint=disable for zoned block device
- sysfs entries such as discard status, discard_io_aware, dir_level
- tracepoints such as f2fs_vm_page_mkwrite(), f2fs_rename(),
f2fs_new_inode()
- use shared inode lock during f2fs_fiemap() and f2fs_seek_block()
Bug fixes:
- address some power-cut recovery issues on zoned block device
- handle errors and logics on do_garbage_collect(),
f2fs_reserve_new_block(), f2fs_move_file_range(),
f2fs_recover_xattr_data()
- don't set FI_PREALLOCATED_ALL for partial write
- fix to update iostat correctly in f2fs_filemap_fault()
- fix to wait on block writeback for post_read case
- fix to tag gcing flag on page during block migration
- restrict max filesize for 16K f2fs
- fix to avoid dirent corruption
- explicitly null-terminate the xattr list
There are also several clean-up patches to remove dead codes and
better readability"
* tag 'f2fs-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (33 commits)
f2fs: show more discard status by sysfs
f2fs: Add error handling for negative returns from do_garbage_collect
f2fs: Constrain the modification range of dir_level in the sysfs
f2fs: Use wait_event_freezable_timeout() for freezable kthread
f2fs: fix to check return value of f2fs_recover_xattr_data
f2fs: don't set FI_PREALLOCATED_ALL for partial write
f2fs: fix to update iostat correctly in f2fs_filemap_fault()
f2fs: fix to check compress file in f2fs_move_file_range()
f2fs: fix to wait on block writeback for post_read case
f2fs: fix to tag gcing flag on page during block migration
f2fs: add tracepoint for f2fs_vm_page_mkwrite()
f2fs: introduce f2fs_invalidate_internal_cache() for cleanup
f2fs: update blkaddr in __set_data_blkaddr() for cleanup
f2fs: introduce get_dnode_addr() to clean up codes
f2fs: delete obsolete FI_DROP_CACHE
f2fs: delete obsolete FI_FIRST_BLOCK_WRITTEN
f2fs: Restrict max filesize for 16K f2fs
f2fs: let's finish or reset zones all the time
f2fs: check write pointers when checkpoint=disable
f2fs: fix write pointers on zoned device after roll forward
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
"Change of locking rules for __dentry_kill(), regularized refcounting
rules in that area, assorted cleanups and removal of weird corner
cases (e.g. now ->d_iput() on child is always called before the parent
might hit __dentry_kill(), etc)"
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
dcache: remove unnecessary NULL check in dget_dlock()
kill DCACHE_MAY_FREE
__d_unalias() doesn't use inode argument
d_alloc_parallel(): in-lookup hash insertion doesn't need an RCU variant
get rid of DCACHE_GENOCIDE
d_genocide(): move the extern into fs/internal.h
simple_fill_super(): don't bother with d_genocide() on failure
nsfs: use d_make_root()
d_alloc_pseudo(): move setting ->d_op there from the (sole) caller
kill d_instantate_anon(), fold __d_instantiate_anon() into remaining caller
retain_dentry(): introduce a trimmed-down lockless variant
__dentry_kill(): new locking scheme
d_prune_aliases(): use a shrink list
switch select_collect{,2}() to use of to_shrink_list()
to_shrink_list(): call only if refcount is 0
fold dentry_kill() into dput()
don't try to cut corners in shrink_lock_dentry()
fold the call of retain_dentry() into fast_dput()
Call retain_dentry() with refcount 0
dentry_kill(): don't bother with retain_dentry() on slow path
...
|
|
Add extra sanity check for btrfs_ioctl_defrag_range_args::flags.
This is not really to enhance fuzzing tests, but as a preparation for
future expansion on btrfs_ioctl_defrag_range_args.
In the future we're going to add new members, allowing more fine tuning
for btrfs defrag. Without the -ENONOTSUPP error, there would be no way
to detect if the kernel supports those new defrag features.
CC: [email protected] # 4.14+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: host: Fix kernel-doc warning
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
...
|
|
Pull io_uring updates from Jens Axboe:
"Mostly just come fixes and cleanups, but one feature as well. In
detail:
- Harden the check for handling IOPOLL based on return (Pavel)
- Various minor optimizations (Pavel)
- Drop remnants of SCM_RIGHTS fd passing support, now that it's no
longer supported since 6.7 (me)
- Fix for a case where bytes_done wasn't initialized properly on a
failure condition for read/write requests (me)
- Move the register related code to a separate file (me)
- Add support for returning the provided ring buffer head (me)
- Add support for adding a direct descriptor to the normal file table
(me, Christian Brauner)
- Fix for ensuring pending task_work for a ring with DEFER_TASKRUN is
run even if we timeout waiting (me)"
* tag 'for-6.8/io_uring-2024-01-08' of git://git.kernel.dk/linux:
io_uring: ensure local task_work is run on wait timeout
io_uring/kbuf: add method for returning provided buffer ring head
io_uring/rw: ensure io->bytes_done is always initialized
io_uring: drop any code related to SCM_RIGHTS
io_uring/unix: drop usage of io_uring socket
io_uring/register: move io_uring_register(2) related code to register.c
io_uring/openclose: add support for IORING_OP_FIXED_FD_INSTALL
io_uring/cmd: inline io_uring_cmd_get_task
io_uring/cmd: inline io_uring_cmd_do_in_task_lazy
io_uring: split out cmd api into a separate header
io_uring: optimise ltimeout for inline execution
io_uring: don't check iopoll if request completes
|
|
Pull block updates from Jens Axboe:
"Pretty quiet round this time around. This contains:
- NVMe updates via Keith:
- nvme fabrics spec updates (Guixin, Max)
- nvme target udpates (Guixin, Evan)
- nvme attribute refactoring (Daniel)
- nvme-fc numa fix (Keith)
- MD updates via Song:
- Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai)
- Fix raid5 hang issue (Junxiao Bi)
- Add Yu Kuai as Reviewer of the md subsystem
- Remove deprecated flavors (Song Liu)
- raid1 read error check support (Li Nan)
- Better handle events off-by-1 case (Alex Lyakas)
- Efficiency improvements for passthrough (Kundan)
- Support for mapping integrity data directly (Keith)
- Zoned write fix (Damien)
- rnbd fixes (Kees, Santosh, Supriti)
- Default to a sane discard size granularity (Christoph)
- Make the default max transfer size naming less confusing
(Christoph)
- Remove support for deprecated host aware zoned model (Christoph)
- Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel,
Bart, Christoph)"
* tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits)
block: Treat sequential write preferred zone type as invalid
block: remove disk_clear_zoned
sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics
drivers/block/xen-blkback/common.h: Fix spelling typo in comment
blk-cgroup: fix rcu lockdep warning in blkg_lookup()
blk-cgroup: don't use removal safe list iterators
block: floor the discard granularity to the physical block size
mtd_blkdevs: use the default discard granularity
bcache: use the default discard granularity
zram: use the default discard granularity
null_blk: use the default discard granularity
nbd: use the default discard granularity
ubd: use the default discard granularity
block: default the discard granularity to sector size
bcache: discard_granularity should not be smaller than a sector
block: remove two comments in bio_split_discard
block: rename and document BLK_DEF_MAX_SECTORS
loop: don't abuse BLK_DEF_MAX_SECTORS
aoe: don't abuse BLK_DEF_MAX_SECTORS
null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- reduce area lock contention for non-primary IO TLB pools (Petr
Tesarik)
- don't store redundant offsets in the dma_ranges stuctures (Robin
Murphy)
- clear dev->dma_mem when freeing per-device pools (Joakim Zhang)
* tag 'dma-mapping-6.8-2024-01-08' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: clear dev->dma_mem to NULL after freeing it
swiotlb: reduce area lock contention for non-primary IO TLB pools
dma-mapping: don't store redundant offsets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"There is one new SoC for each 32-bit Arm and 64-bit RISC-V, but both
the Rockchips rv1109 and Sopgho CV1812H are just minor variations of
already supported chips.
The other six new SoCs are all part of existing arm64 families, but
are somewhat more interesting:
- Samsung ExynosAutov920 is an automotive chip, and the first one we
support based on the Cortex-A78AE core with lockstep mode.
- Google gs101 (Tensor G1) is the chip used in a number of Pixel
phones, and is grouped with Samsung Exynos here since it is based
on the same SoC design, sharing most of its IP blocks with that
series.
- MediaTek MT8188 is a new chip used for mid-range tablets and
Chromebooks, using two Cortex-A78 cores where the older MT8195 had
four of them.
- Qualcomm SM8650 (Snapdragon 8 Gen 3) is their current top range
phone SoC and the first supported chip based on Cortex-X4,
Cortex-A720 and Cortex-A520.
- Qualcomm X1E80100 (Snapdragon X Elite) in turn is the latest Laptop
chip using the custom Oryon cores.
- Unisoc UMS9620 (Tanggula 7 series) is a 5G phone SoC based on
Cortex-A76 and Cortex-A55
In terms of boards, we have
- Five old Microsoft Lumia phones, the HTC One Mini 2, Motorola Moto
G 4G, and Huawei Honor 5X/GR5, all based on Snapdragon SoCs.
- Multiple Rockchips mobile gaming systems (Anbernic RG351V, Powkiddy
RK2023, Powkiddy X55) along with the Sonoff iHost Smart Home Hub
and a few Rockchips SBCs
- Some ComXpress boards based on Marvell CN913x, which is the
follow-up to Armada 7xxx/8xxx.
- Six new industrial/embedded boards based on NXP i.MX8 and i.MX9
- Mediatek MT8183 based Chromebooks from Lenovo, Asus and Acer.
- Toradex Verdin AM62 Mallow carrier for TI AM62
- Huashan Pi board based on the SophGo CV1812H RISC-V chip
- Two boards based on Allwinner H616/H618
- A number of reference boards for various added SoCs from Qualcomm,
Mediatek, Google, Samsung, NXP and Spreadtrum
As usual, there are cleanups and warning fixes across all platforms as
well as added features for several of them"
* tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (857 commits)
ARM: dts: usr8200: Fix phy registers
arm64: dts: intel: minor whitespace cleanup around '='
arm64: dts: socfpga: agilex: drop redundant status
arm64: dts: socfpga: agilex: add unit address to soc node
arm64: dts: socfpga: agilex: move firmware out of soc node
arm64: dts: socfpga: agilex: move FPGA region out of soc node
arm64: dts: socfpga: agilex: align pin-controller name with bindings
arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties
arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings
arm64: dts: socfpga: stratix10: add unit address to soc node
arm64: dts: socfpga: stratix10: move firmware out of soc node
arm64: dts: socfpga: stratix10: move FPGA region out of soc node
arm64: dts: socfpga: stratix10: align pincfg nodes with bindings
arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB
arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
ARM: dts: socfpga: align NAND controller name with bindings
ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
This adds the data structure invalidating caches for the nested domain
allocated with IOMMU_HWPT_DATA_VTD_S1 type.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Wrap up the data pointer/num sanity and __iommu_copy_struct_from_user()
call for iommu drivers to copy driver specific data at a specific location
in the struct iommu_user_data_array.
And expect it to be used in cache_invalidate_user ops for example.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Co-developed-by: Yi Liu <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
In nested translation, the stage-1 page table is user-managed but cached
by the IOMMU hardware, so an update on present page table entries in the
stage-1 page table should be followed with a cache invalidation.
Add an IOMMU_HWPT_INVALIDATE ioctl to support such a cache invalidation.
It takes hwpt_id to specify the iommu_domain, and a multi-entry array to
support multiple invalidation data in one ioctl.
enum iommu_hwpt_invalidate_data_type is defined to tag the data type of
the entries in the multi-entry array.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Co-developed-by: Nicolin Chen <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The updates of the PTEs in the nested page table will be propagated to the
hardware caches.
Add a new domain op cache_invalidate_user() for the userspace to flush the
hardware caches for a nested domain through iommufd. No wrapper for it, as
it's only supposed to be used by iommufd. Then, pass in invalidation
requests in form of a user data array containing a number of invalidation
data entries.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs
it for pre-PAT systems. This series notably contains a patch from
Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
other architecture does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in
architecture specific code across several architectures. This is now
needed as the warning is enabled by default. There are still some
remaining warnings in minor platforms, but the series should catch
most of the widely used ones make them more consistent with one
another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64 and
sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures"
* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Fix 32 bit __generic_cmpxchg_local
Hexagon: Make pfn accessors statics inlines
ARC: mm: Make virt_to_pfn() a static inline
mips: remove extraneous asm-generic/iomap.h include
sparc: Use $(kecho) to announce kernel images being ready
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"Just one cleanup and one documentation improvement change. No
functional changes"
* tag 'modules-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
kernel/module: improve documentation for try_module_get()
module: Remove redundant TASK_UNINTERRUPTIBLE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work.
In the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to
remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as
those patches are still being reviewed. After that we then can expect
also the removal of the no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
see further work by Thomas Weißschuh with the constificatin of the
struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have
suggested for him to become a maintainer and he's accepted. So for
v6.9-rc1 I look forward to seeing him sent you a pull request for
further sysctl changes. This also removes Iurii Zaikin as a maintainer
as he has moved on to other projects and has had no time to help at
all"
* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove struct ctl_path
sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
coda: Remove the now superfluous sentinel elements from ctl_table array
sysctl: Remove the now superfluous sentinel elements from ctl_table array
fs: Remove the now superfluous sentinel elements from ctl_table array
cachefiles: Remove the now superfluous sentinel element from ctl_table array
sysclt: Clarify the results of selftest run
sysctl: Add a selftest for handling empty dirs
sysctl: Fix out of bounds access for empty sysctl registers
MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
MAINTAINERS: remove Iurii Zaikin from proc sysctl
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
Pull nfs client updates from Anna Schumaker:
"New Features:
- Always ask for type with READDIR
- Remove nfs_writepage()
Bugfixes:
- Fix a suspicious RCU usage warning
- Fix a blocklayoutdriver reference leak
- Fix the block driver's calculation of layoutget size
- Fix handling NFS4ERR_RETURNCONFLICT
- Fix _xprt_switch_find_current_entry()
- Fix v4.1 backchannel request timeouts
- Don't add zero-length pnfs block devices
- Use the parent cred in nfs_access_login_time()
Cleanups:
- A few improvements when dealing with referring calls from the
server
- Clean up various unused variables, struct fields, and function
calls
- Various tracepoint improvements"
* tag 'nfs-for-6.8-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (21 commits)
NFSv4.1: Use the nfs_client's rpc timeouts for backchannel
SUNRPC: Fixup v4.1 backchannel request timeouts
rpc_pipefs: Replace one label in bl_resolve_deviceid()
nfs: Remove writepage
NFS: drop unused nfs_direct_req bytes_left
pNFS: Fix the pnfs block driver's calculation of layoutget size
nfs: print fileid in lookup tracepoints
nfs: rename the nfs_async_rename_done tracepoint
nfs: add new tracepoint at nfs4 revalidate entry point
SUNRPC: fix _xprt_switch_find_current_entry logic
NFSv4.1/pnfs: Ensure we handle the error NFS4ERR_RETURNCONFLICT
NFSv4.1: if referring calls are complete, trust the stateid argument
NFSv4: Track the number of referring calls in struct cb_process_state
NFS: Use parent's objective cred in nfs_access_login_time()
NFSv4: Always ask for type with READDIR
pnfs/blocklayout: Don't add zero-length pnfs_block_dev
blocklayoutdriver: Fix reference leak of pnfs_device_node
SUNRPC: Fix a suspicious RCU usage warning
SUNRPC: Create a helper function for accessing the rpc_clnt's xprt_switch
SUNRPC: Remove unused function rpc_clnt_xprt_switch_put()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various ext4 bug fixes and cleanups. The fixes are mostly in the
fstrim and mballoc code paths.
Also enable dioread_nolock in the case where the block size is less
than the page size (dioread_nolock has been default in the bs == ps
case for quite some time)"
* tag 'ext4_for_linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix inconsistent between segment fstrim and full fstrim
ext4: fallback to complex scan if aligned scan doesn't work
ext4: convert ext4_da_do_write_end() to take a folio
ext4: allow for the last group to be marked as trimmed
ext4: move ext4_check_bdev_write_error() into nojournal mode
jbd2: abort journal when detecting metadata writeback error of fs dev
jbd2: remove unused 'JBD2_CHECKPOINT_IO_ERROR' and 'j_atomic_flags'
jbd2: replace journal state flag by checking errseq
jbd2: add errseq to detect client fs's bdev writeback error
ext4: improving calculation of 'fe_{len|start}' in mb_find_extent()
ext4: clarify handling of unwritten bh in __ext4_block_zero_page_range()
ext4: treat end of range as exclusive in ext4_zero_range()
ext4: enable dioread_nolock as default for bs < ps case
ext4: delete redundant calculations in ext4_mb_get_buddy_page_lock()
ext4: reduce unnecessary memory allocation in alloc_flex_gd()
ext4: avoid online resizing failures due to oversized flex bg
ext4: remove unnecessary check from alloc_flex_gd()
ext4: unify the type of flexbg_size to unsigned int
|
|
for-6.8/block
Pull NVMe changes from Keith:
"nvme follow-up updates for Linux 6.8
- tcp, fc, and rdma target fixes (Maurizio, Daniel, Hannes, Christoph)
- discard fixes and improvements (Christoph)
- timeout debug improvements (Keith, Max)
- various cleanups (Daniel, Max, Giuxen)
- trace event string fixes (Arnd)
- shadow doorbell setup on reset fix (William)
- a write zeroes quirk for SK Hynix (Jim)"
* tag 'nvme-6.8-2024-1-10' of git://git.infradead.org/nvme: (25 commits)
nvmet-rdma: avoid circular locking dependency on install_queue()
nvmet-tcp: avoid circular locking dependency on install_queue()
nvme-pci: set doorbell config before unquiescing
nvmet-tcp: Fix the H2C expected PDU len calculation
nvme-tcp: enhance timeout kernel log
nvme-rdma: enhance timeout kernel log
nvme-pci: enhance timeout kernel log
nvme: trace: avoid memcpy overflow warning
nvmet: re-fix tracing strncpy() warning
nvme: introduce nvme_disk_is_ns_head helper
nvme-pci: disable write zeroes for SK Hynix BC901
nvmet-fcloop: Remove remote port from list when unlinking
nvmet-trace: avoid dereferencing pointer too early
nvmet-fc: remove unnecessary bracket
nvme: simplify the max_discard_segments calculation
nvme: fix max_discard_sectors calculation
nvme: also skip discard granularity updates in nvme_config_discard
nvme: update the explanation for not updating the limits in nvme_config_discard
nvmet-tcp: fix a missing endianess conversion in nvmet_tcp_try_peek_pdu
nvme-common: mark nvme_tls_psk_prio static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add incremental lskcipher/skcipher processing
Algorithms:
- Remove SHA1 from drbg
- Remove CFB and OFB
Drivers:
- Add comp high perf mode configuration in hisilicon/zip
- Add support for 420xx devices in qat
- Add IAA Compression Accelerator driver"
* tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits)
crypto: iaa - Account for cpu-less numa nodes
crypto: scomp - fix req->dst buffer overflow
crypto: sahara - add support for crypto_engine
crypto: sahara - remove error message for bad aes request size
crypto: sahara - remove unnecessary NULL assignments
crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct
crypto: sahara - use dev_err_probe()
crypto: sahara - use devm_clk_get_enabled()
crypto: sahara - use BIT() macro
crypto: sahara - clean up macro indentation
crypto: sahara - do not resize req->src when doing hash operations
crypto: sahara - fix processing hash requests with req->nbytes < sg->length
crypto: sahara - improve error handling in sahara_sha_process()
crypto: sahara - fix wait_for_completion_timeout() error handling
crypto: sahara - fix ahash reqsize
crypto: sahara - handle zero-length aes requests
crypto: skcipher - remove excess kerneldoc members
crypto: shash - remove excess kerneldoc members
crypto: qat - generate dynamically arbiter mappings
crypto: qat - add support for ring pair level telemetry
...
|
|
Before commit 7839d0078e0d ("PM: sleep: Fix possible deadlocks in core
system-wide PM code"), the resume of devices that were allowed to resume
asynchronously was scheduled before starting the resume of the other
devices, so the former did not have to wait for the latter unless
functional dependencies were present.
Commit 7839d0078e0d removed that optimization in order to address a
correctness issue, but it can be restored with the help of a new device
power management flag, so do that now.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce the param_unknown_fn type and other clean ups (Andy
Shevchenko)
- Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
Silva, Kees Cook)
- Add KFENCE test to LKDTM (Stephen Boyd)
- Various strncpy() refactorings (Justin Stitt)
- Fix qnx4 to avoid writing into the smaller of two overlapping buffers
- Various strlcpy() refactorings
* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
qnx4: Use get_directory_fname() in qnx4_match()
qnx4: Extract dir entry filename processing into helper
atags_proc: Add __counted_by for struct buffer and use struct_size()
tracing/uprobe: Replace strlcpy() with strscpy()
params: Fix multi-line comment style
params: Sort headers
params: Use size_add() for kmalloc()
params: Do not go over the limit when getting the string length
params: Introduce the param_unknown_fn type
lkdtm: Add kfence read after free crash type
nvme-fc: replace deprecated strncpy with strscpy
nvdimm/btt: replace deprecated strncpy with strscpy
nvme-fabrics: replace deprecated strncpy with strscpy
drm/modes: replace deprecated strncpy with strscpy_pad
afs: Add __counted_by for struct afs_acl and use struct_size()
VMCI: Annotate struct vmci_handle_arr with __counted_by
i40e: Annotate struct i40e_qvlist_info with __counted_by
HID: uhid: replace deprecated strncpy with strscpy
samples: Replace strlcpy() with strscpy()
SUNRPC: Replace strlcpy() with strscpy()
|
|
Pull nfsd updates from Chuck Lever:
"The bulk of the patches for this release are clean-ups and minor bug
fixes.
There is one significant revert to mention: support for RDMA Read
operations in the server's RPC-over-RDMA transport implementation has
been fixed so it waits for Read completion in a way that avoids tying
up an nfsd thread. This prevents a possible DoS vector if an
RPC-over-RDMA client should become unresponsive during RDMA Read
operations.
As always I am grateful to NFSD contributors, reviewers, and testers"
* tag 'nfsd-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
nfsd: rename nfsd_last_thread() to nfsd_destroy_serv()
SUNRPC: discard sv_refcnt, and svc_get/svc_put
svc: don't hold reference for poolstats, only mutex.
SUNRPC: remove printk when back channel request not found
svcrdma: Implement multi-stage Read completion again
svcrdma: Copy construction of svc_rqst::rq_arg to rdma_read_complete()
svcrdma: Add back svcxprt_rdma::sc_read_complete_q
svcrdma: Add back svc_rdma_recv_ctxt::rc_pages
svcrdma: Clean up comment in svc_rdma_accept()
svcrdma: Remove queue-shortening warnings
svcrdma: Remove pointer addresses shown in dprintk()
svcrdma: Optimize svc_rdma_cc_init()
svcrdma: De-duplicate completion ID initialization helpers
svcrdma: Move the svc_rdma_cc_init() call
svcrdma: Remove struct svc_rdma_read_info
svcrdma: Update the synopsis of svc_rdma_read_special()
svcrdma: Update the synopsis of svc_rdma_read_call_chunk()
svcrdma: Update synopsis of svc_rdma_read_multiple_chunks()
svcrdma: Update synopsis of svc_rdma_copy_inline_range()
svcrdma: Update the synopsis of svc_rdma_read_data_item()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs updates from David Howells:
"The majority of the patches are aimed at fixing and improving the AFS
filesystem's rotation over server IP addresses, but there are also
some fixes from Oleg Nesterov for the use of read_seqbegin_or_lock().
- Fix fileserver probe handling so that the next round of probes
doesn't break ongoing server/address rotation by clearing all the
probe result tracking. This could occasionally cause the rotation
algorithm to drop straight through, give a 'successful' result
without actually emitting any RPC calls, leaving the reply buffer
in an undefined state.
Instead, detach the probe results into a separate struct and
allocate a new one each time we start probing and update the
pointer to it. Probes are also sent in order of address preference
to try and improve the chance that the preferred one will complete
first.
- Fix server rotation so that it uses configurable address
preferences across on the probes that have completed so far than
ranking them by RTT as the latter doesn't necessarily give the best
route. The preference list can be altered by writing into
/proc/net/afs/addr_prefs.
- Fix the handling of Read-Only (and Backup) volume callbacks as
there is one per volume, not one per file, so if someone performs a
command that, say, offlines the volume but doesn't change it, when
it comes back online we don't spam the server with a status fetch
for every vnode we're using. Instead, check the Creation timestamp
in the VolSync record when prompted by a callback break.
- Handle volume regression (ie. a RW volume being restored from a
backup) by scrubbing all cache data for that volume. This is
detected from the VolSync creation timestamp.
- Adjust abort handling and abort -> error mapping to match better
with what other AFS clients do.
- Fix offline and busy volume state handling as they only apply to
individual server instances and not entire volumes and the rotation
algorithm should go and look at other servers if available. Also
make it sleep briefly before each retry if all the volume instances
are unavailable"
* tag 'afs-fix-rotation-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (40 commits)
afs: trace: Log afs_make_call(), including server address
afs: Fix offline and busy message emission
afs: Fix fileserver rotation
afs: Overhaul invalidation handling to better support RO volumes
afs: Parse the VolSync record in the reply of a number of RPC ops
afs: Don't leave DONTUSE/NEWREPSITE servers out of server list
afs: Fix comment in afs_do_lookup()
afs: Apply server breaks to mmap'd files in the call processor
afs: Move the vnode/volume validity checking code into its own file
afs: Defer volume record destruction to a workqueue
afs: Make it possible to find the volumes that are using a server
afs: Combine the endpoint state bools into a bitmask
afs: Keep a record of the current fileserver endpoint state
afs: Dispatch vlserver probes in priority order
afs: Dispatch fileserver probes in priority order
afs: Mark address lists with configured priorities
afs: Provide a way to configure address priorities
afs: Remove the unimplemented afs_cmp_addr_list()
afs: Add some more info to /proc/net/afs/servers
rxrpc: Create a procfile to display outstanding client conn bundles
...
|
|
Instead of tearing down and setting up vq resources, use vq
suspend/resume during .set_map to speed things up a bit.
The vq mr is updated with the new mapping while the vqs are suspended.
If the device doesn't support resumable vqs, do the old teardown and
setup dance.
Reviewed-by: Gal Pressman <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Dragos Tatulea <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
.set_vq_state will set the indices and mark the fields to be modified in
the hw vq.
Advertise that the device supports changing the vq state when the device
is in DRIVER_OK state and suspended.
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Dragos Tatulea <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Addresses get set by .set_vq_address. hw vq addresses will be updated on
next modify_virtqueue.
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Dragos Tatulea <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Necessary for checking if resumable vqs are supported by the hardware.
Actual support will be added in a downstream patch.
Reviewed-by: Gal Pressman <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Signed-off-by: Dragos Tatulea <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This patch adds the support for feature VIRTIO_PMEM_F_SHMEM_REGION
(virtio spec v1.2 section 5.19.5.2 [1]).
During feature negotiation, if VIRTIO_PMEM_F_SHMEM_REGION is offered
by the device, the driver looks for a shared memory region of id 0.
If it is found, this feature is understood. Otherwise, this feature
bit is cleared.
During probe, if VIRTIO_PMEM_F_SHMEM_REGION has been negotiated,
virtio pmem ignores the `start` and `size` fields in device config
and uses the physical address range of shared memory region 0.
[1] https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-6480002
Signed-off-by: Changyuan Lyu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There are no exciting changes for users, it's been mostly API
conversions and some fixes or refactoring.
The mount API conversion is a base for future improvements that would
come with VFS. Metadata processing has been converted to folios, not
yet enabling the large folios but it's one patch away once everything
gets tested enough.
Core changes:
- convert extent buffers to folios:
- direct API conversion where possible
- performance can drop by a few percent on metadata heavy
workloads, the folio sizes are not constant and the calculations
add up in the item helpers
- both regular and subpage modes
- data cannot be converted yet, we need to port that to iomap and
there are some other generic changes required
- convert mount to the new API, should not be user visible:
- options deprecated long time ago have been removed: inode_cache,
recovery
- the new logic that splits mount to two phases slightly changes
timing of device scanning for multi-device filesystems
- LSM options will now work (like for selinux)
- convert delayed nodes radix tree to xarray, preserving the
preload-like logic that still allows to allocate with GFP_NOFS
- more validation of sysfs value of scrub_speed_max
- refactor chunk map structure, reduce size and improve performance
- extent map refactoring, smaller data structures, improved
performance
- reduce size of struct extent_io_tree, embedded in several
structures
- temporary pages used for compression are cached and attached to a
shrinker, this may slightly improve performance
- in zoned mode, remove redirty extent buffer tracking, zeros are
written in case an out-of-order is detected and proper data are
written to the actual write pointer
- cleanups, refactoring, error message improvements, updated tests
- verify and update branch name or tag
- remove unwanted text"
* tag 'for-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (89 commits)
btrfs: pass btrfs_io_geometry into btrfs_max_io_len
btrfs: pass struct btrfs_io_geometry to set_io_stripe
btrfs: open code set_io_stripe for RAID56
btrfs: change block mapping to switch/case in btrfs_map_block
btrfs: factor out block mapping for single profiles
btrfs: factor out block mapping for RAID5/6
btrfs: reduce scope of data_stripes in btrfs_map_block
btrfs: factor out block mapping for RAID10
btrfs: factor out block mapping for DUP profiles
btrfs: factor out RAID1 block mapping
btrfs: factor out block-mapping for RAID0
btrfs: re-introduce struct btrfs_io_geometry
btrfs: factor out helper for single device IO check
btrfs: migrate btrfs_repair_io_failure() to folio interfaces
btrfs: migrate eb_bitmap_offset() to folio interfaces
btrfs: migrate various end io functions to folios
btrfs: migrate subpage code to folio interfaces
btrfs: migrate get_eb_page_index() and get_eb_offset_in_page() to folios
btrfs: don't double put our subpage reference in alloc_extent_buffer
btrfs: cleanup metadata page pointer usage
...
|