aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-09-28mac80211: support S1G associationThomas Pedersen2-0/+23
The changes required for associating in S1G are: - apply S1G BSS channel info before assoc - mark all S1G STAs as QoS STAs - include and parse AID request element - handle new Association Response format - don't fail assoc if supported rates element is missing Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com [pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: handle S1G low ratesThomas Pedersen1-0/+2
S1G doesn't have legacy (sband->bitrates) rates, only MCS. For now, just send a frame at MCS 0 if a low rate is requested. Note we also redefine (since we're out of TX flags) TX_RC_VHT_MCS as TX_RC_S1G_MCS to indicate an S1G MCS. This is probably OK as VHT MCS is not valid on S1G band and vice versa. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-12-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: encode listen interval for S1GThomas Pedersen1-0/+7
S1G allows listen interval up to 2^14 * 10000 beacon intervals. In order to do this listen interval needs a scaling factor applied to the lower 14 bits. Calculate this and properly encode the listen interval for S1G STAs. See IEEE802.11ah-2016 Table 9-44a for reference. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com [move listen_int_usf into function using it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: handle Association Response from S1G STAThomas Pedersen1-0/+5
The sending STA type is implicit based on beacon or probe response content. If sending STA was an S1G STA, adjust the Information Element location accordingly. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-9-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: convert S1G beacon to scan resultsThomas Pedersen1-0/+32
The S1G beacon is an extension frame as opposed to management frame for the regular beacon. This means we may have to occasionally cast the frame buffer to a different header type. Luckily this isn't too bad as scan results mostly only care about the IEs. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211: support S1G capability overrides in assocThomas Pedersen3-0/+14
NL80211_ATTR_S1G_CAPABILITY can be passed along with NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE to indicate S1G capabilities which should override the hardware capabilities in eg. the association request. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-4-thomas@adapt-ip.com [johannes: always require both attributes together, commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211/cfg80211: support 6 GHz scanningTova Mussai2-1/+34
Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-27ptp: add stub function for ptp_get_msgtype()Yangbo Lu1-0/+8
Added the missing stub function for ptp_get_msgtype(). Fixes: 036c508ba95e ("ptp: Add generic ptp message type function") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: dsa: point out the tail taggersVladimir Oltean1-0/+1
The Marvell 88E6060 uses tag_trailer.c and the KSZ8795, KSZ9477 and KSZ9893 switches also use tail tags. Tell that to the DSA core, since this makes a difference for the flow dissector. Most switches break the parsing of frame headers, but these ones don't, so no flow dissector adjustment needs to be done for them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: dsa: add a generic procedure for the flow dissectorVladimir Oltean1-0/+26
For all DSA formats that don't use tail tags, it looks like behind the obscure number crunching they're all doing the same thing: locating the real EtherType behind the DSA tag. Nonetheless, this is not immediately obvious, so create a generic helper for those DSA taggers that put the header before the EtherType. Another assumption for the generic function is that the DSA tags are of equal length on RX and on TX. Prior to the previous patch, this was not true for ocelot and for gswip. The problem was resolved for ocelot, but for gswip it still remains, so that can't use this helper yet. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: dsa: make the .flow_dissect tagger callback return voidVladimir Oltean1-2/+2
There is no tagger that returns anything other than zero, so just change the return type appropriately. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: dsa: tag_ocelot: use a short prefix on both ingress and egressVladimir Oltean1-0/+1
There are 2 goals that we follow: - Reduce the header size - Make the header size equal between RX and TX The issue that required long prefix on RX was the fact that the ocelot DSA tag, being put before Ethernet as it is, would overlap with the area that a DSA master uses for RX filtering (destination MAC address mainly). Now that we can ask DSA to put the master in promiscuous mode, in theory we could remove the prefix altogether and call it a day, but it looks like we can't. Using no prefix on ingress, some packets (such as ICMP) would be received, while others (such as PTP) would not be received. This is because the DSA master we use (enetc) triggers parse errors ("MAC rx frame errors") presumably because it sees Ethernet frames with a bad length. And indeed, when using no prefix, the EtherType (bytes 12-13 of the frame, bits 96-111) falls over the REW_VAL field from the extraction header, aka the PTP timestamp. When turning the short (32-bit) prefix on, the EtherType overlaps with bits 64-79 of the extraction header, which are a reserved area transmitted as zero by the switch. The packets are not dropped by the DSA master with a short prefix. Actually, the frames look like this in tcpdump (below is a PTP frame, with an extra dsa_8021q tag - dadb 0482 - added by a downstream sja1105). 89:0c:a9:f2:01:00 > 88:80:00:0a:00:1d, 802.3, length 0: LLC, \ dsap Unknown (0x10) Individual, ssap ProWay NM (0x0e) Response, \ ctrl 0x0004: Information, send seq 2, rcv seq 0, \ Flags [Response], length 78 0x0000: 8880 000a 001d 890c a9f2 0100 0000 100f ................ 0x0010: 0400 0000 0180 c200 000e 001f 7b63 0248 ............{c.H 0x0020: dadb 0482 88f7 1202 0036 0000 0000 0000 .........6...... 0x0030: 0000 0000 0000 0000 0000 001f 7bff fe63 ............{..c 0x0040: 0248 0001 1f81 0500 0000 0000 0000 0000 .H.............. 0x0050: 0000 0000 0000 0000 0000 0000 ............ So the short prefix is our new default: we've shortened our RX frames by 12 octets, increased TX by 4, and headers are now equal between RX and TX. Note that we still need promiscuous mode for the DSA master to not drop it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: dsa: allow drivers to request promiscuous mode on masterVladimir Oltean1-0/+6
Currently DSA assumes that taggers don't mess with the destination MAC address of the frames on RX. That is not always the case. Some DSA headers are placed before the Ethernet header (ocelot), and others simply mangle random bytes from the destination MAC address (sja1105 with its incl_srcpt option). Currently the DSA master goes to promiscuous mode automatically when the slave devices go too (such as when enslaved to a bridge), but in standalone mode this is a problem that needs to be dealt with. So give drivers the possibility to signal that their tagging protocol will get randomly dropped otherwise, and let DSA deal with fixing that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: mscc: ocelot: move NPI port configuration to DSAVladimir Oltean1-3/+0
Remove the ocelot_configure_cpu() function, which was in fact bringing up 2 ports: the CPU port module, which both switchdev and DSA have, and the NPI port, which only DSA has. The (non-Ethernet) CPU port module is at a fixed index in the analyzer, whereas the NPI port is selected through the "ethernet" property in the device tree. Therefore, the function to set up an NPI port is DSA-specific, so we move it there, simplifying the ocelot switch library a little bit. Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: UNGLinuxDriver <UNGLinuxDriver@microchip.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25devlink: introduce flash update overwrite maskJacob Keller2-1/+26
Sections of device flash may contain settings or device identifying information. When performing a flash update, it is generally expected that these settings and identifiers are not overwritten. However, it may sometimes be useful to allow overwriting these fields when performing a flash update. Some examples include, 1) customizing the initial device config on first programming, such as overwriting default device identifying information, or 2) reverting a device configuration to known good state provided in the new firmware image, or 3) in case it is suspected that current firmware logic for managing the preservation of fields during an update is broken. Although some devices are able to completely separate these types of settings and fields into separate components, this is not true for all hardware. To support controlling this behavior, a new DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK is defined. This is an nla_bitfield32 which will define what subset of fields in a component should be overwritten during an update. If no bits are specified, or of the overwrite mask is not provided, then an update should not overwrite anything, and should maintain the settings and identifiers as they are in the previous image. If the overwrite mask has the DEVLINK_FLASH_OVERWRITE_SETTINGS bit set, then the device should be configured to overwrite any of the settings in the requested component with settings found in the provided image. Similarly, if the DEVLINK_FLASH_OVERWRITE_IDENTIFIERS bit is set, the device should be configured to overwrite any device identifiers in the requested component with the identifiers from the image. Multiple overwrite modes may be combined to indicate that a combination of the set of fields that should be overwritten. Drivers which support the new overwrite mask must set the DEVLINK_SUPPORT_FLASH_UPDATE_OVERWRITE_MASK in the supported_flash_update_params field of their devlink_ops. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25devlink: convert flash_update to use params structureJacob Keller1-2/+16
The devlink core recently gained support for checking whether the driver supports a flash_update parameter, via `supported_flash_update_params`. However, parameters are specified as function arguments. Adding a new parameter still requires modifying the signature of the .flash_update callback in all drivers. Convert the .flash_update function to take a new `struct devlink_flash_update_params` instead. By using this structure, and the `supported_flash_update_params` bit field, a new parameter to flash_update can be added without requiring modification to existing drivers. As before, all parameters except file_name will require driver opt-in. Because file_name is a necessary field to for the flash_update to make sense, no "SUPPORTED" bitflag is provided and it is always considered valid. All future additional parameters will require a new bit in the supported_flash_update_params bitfield. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Bin Luo <luobin9@huawei.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Ido Schimmel <idosch@mellanox.com> Cc: Danielle Ratson <danieller@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25devlink: check flash_update parameter support in net coreJacob Keller1-0/+15
When implementing .flash_update, drivers which do not support per-component update are manually checking the component parameter to verify that it is NULL. Without this check, the driver might accept an update request with a component specified even though it will not honor such a request. Instead of having each driver check this, move the logic into net/core/devlink.c, and use a new `supported_flash_update_params` field in the devlink_ops. Drivers which will support per-component update must now specify this by setting DEVLINK_SUPPORT_FLASH_UPDATE_COMPONENT in the supported_flash_update_params in their devlink_ops. This helps ensure that drivers do not forget to check for a NULL component if they do not support per-component update. This also enables a slightly better error message by enabling the core stack to set the netlink bad attribute message to indicate precisely the unsupported attribute in the message. Going forward, any new additional parameter to flash update will require a bit in the supported_flash_update_params bitfield. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Bin Luo <luobin9@huawei.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Ido Schimmel <idosch@mellanox.com> Cc: Danielle Ratson <danieller@mellanox.com> Cc: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: stmmac: Add option for VLAN filter fail queue enableChuah, Kim Tatt1-0/+2
Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail Queuing. This option allows packets that fail VLAN filter to be routed to a specific Rx queue when Receive All is also set. When this option is enabled: - Enable VFFQ only when entering promiscuous mode, because Receive All will pass up all rx packets that failed address filtering (similar to promiscuous mode). - VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN filters and get routed to selected VFFQ Rx queue. Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: tcp: drop unused function argument from mptcp_incoming_optionsFlorian Westphal1-4/+2
Since commit cfde141ea3faa30e ("mptcp: move option parsing into mptcp_incoming_options()"), the 3rd function argument is no longer used. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24mptcp: add sk_stop_timer_sync helperGeliang Tang1-0/+2
This patch added a new helper sk_stop_timer_sync, it deactivates a timer like sk_stop_timer, but waits for the handler to finish. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24of: add of_mdio_find_device() apiRussell King1-0/+6
Add a helper function which finds the mdio_device structure given a device tree node. This is helpful for finding the PCS device based on a DTS node but managing it as a mdio_device instead of a phy_device. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: mscc: ocelot: always pass skb clone to ocelot_port_add_txtstamp_skbVladimir Oltean1-2/+2
Currently, ocelot switchdev passes the skb directly to the function that enqueues it to the list of skb's awaiting a TX timestamp. Whereas the felix DSA driver first clones the skb, then passes the clone to this queue. This matters because in the case of felix, the common IRQ handler, which is ocelot_get_txtstamp(), currently clones the clone, and frees the original clone. This is useless and can be simplified by using skb_complete_tx_timestamp() instead of skb_tstamp_tx(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: phy: Document core PHY structuresAndrew Lunn1-131/+292
Add kerneldoc for the core PHY data structures, a few inline functions and exported functions which are not already documented. v2 Typos g/phy/PHY/s Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: phy: Fixup kernel docAndrew Lunn2-2/+4
Add missing parameter documentation, or fixup wrong parameter names. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mcast: add support for blocked port groupsNikolay Aleksandrov1-0/+1
When excluding S,G entries we need a way to block a particular S,G,port. The new port group flag is managed based on the source's timer as per RFCs 3376 and 3810. When a source expires and its port group is in EXCLUDE mode, it will be blocked. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mcast: handle port group filter modesNikolay Aleksandrov1-0/+1
We need to handle group filter mode transitions and initial state. To change a port group's INCLUDE -> EXCLUDE mode (or when we have added a new port group in EXCLUDE mode) we need to add that port to all of *,G ports' S,G entries for proper replication. When the EXCLUDE state is changed from IGMPv3 report, br_multicast_fwd_filter_exclude() must be called after the source list processing because the assumption is that all of the group's S,G entries will be created before transitioning to EXCLUDE mode, i.e. most importantly its blocked entries will already be added so it will not get automatically added to them. The transition EXCLUDE -> INCLUDE happens only when a port group timer expires, it requires us to remove that port from all of *,G ports' S,G entries where it was automatically added previously. Finally when we are adding a new S,G entry we must add all of *,G's EXCLUDE ports to it. In order to distinguish automatically added *,G EXCLUDE ports we have a new port group flag - MDB_PG_FLAGS_STAR_EXCL. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mcast: add rt_protocol field to the port group structNikolay Aleksandrov1-0/+1
We need to be able to differentiate between pg entries created by user-space and the kernel when we start generating S,G entries for IGMPv3/MLDv2's fast path. User-space entries are created by default as RTPROT_STATIC and the kernel entries are RTPROT_KERNEL. Later we can allow user-space to provide the entry rt_protocol so we can differentiate between who added the entries specifically (e.g. clag, admin, frr etc). Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mdb: add support for add/del/dump of entries with sourceNikolay Aleksandrov1-0/+2
Add new mdb attributes (MDBE_ATTR_SOURCE for setting, MDBA_MDB_EATTR_SOURCE for dumping) to allow add/del and dump of mdb entries with a source address (S,G). New S,G entries are created with filter mode of MCAST_INCLUDE. The same attributes are used for IPv4 and IPv6, they're validated and parsed based on their protocol. S,G host joined entries which are added by user are not allowed yet. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mdb: add support to extend add/del commandsNikolay Aleksandrov1-0/+12
Since the MDB add/del code expects an exact struct br_mdb_entry we can't really add any extensions, thus add a new nested attribute at the level of MDBA_SET_ENTRY called MDBA_SET_ENTRY_ATTRS which will be used to pass all new options via netlink attributes. This patch doesn't change anything functionally since the new attribute is not used yet, only parsed. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: mcast: rename br_ip's u member to dstNikolay Aleksandrov1-1/+1
Since now we have src in br_ip, u no longer makes sense so rename it to dst. No functional changes. v2: fix build with CONFIG_BATMAN_ADV_MCAST CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sven Eckelmann <sven@narfation.org> CC: b.a.t.m.a.n@lists.open-mesh.org Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: bridge: add src field to br_ipNikolay Aleksandrov1-0/+6
Add a new src field to struct br_ip which will be used to lookup S, G entries. When SSM option is added we will enable full br_ip lookups. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller7-59/+89
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-09-23 The following pull-request contains BPF updates for your *net-next* tree. We've added 95 non-merge commits during the last 22 day(s) which contain a total of 124 files changed, 4211 insertions(+), 2040 deletions(-). The main changes are: 1) Full multi function support in libbpf, from Andrii. 2) Refactoring of function argument checks, from Lorenz. 3) Make bpf_tail_call compatible with functions (subprograms), from Maciej. 4) Program metadata support, from YiFei. 5) bpf iterator optimizations, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller38-65/+199
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull vfs fixes from Al Viro: "No common topic, just assorted fixes" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse: fix the ->direct_IO() treatment of iov_iter fs: fix cast in fsparam_u32hex() macro vboxsf: Fix the check for the old binary mount-arguments struct
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds11-9/+21
Pull networking fixes from Jakub Kicinski: - fix failure to add bond interfaces to a bridge, the offload-handling code was too defensive there and recent refactoring unearthed that. Users complained (Ido) - fix unnecessarily reflecting ECN bits within TOS values / QoS marking in TCP ACK and reset packets (Wei) - fix a deadlock with bpf iterator. Hopefully we're in the clear on this front now... (Yonghong) - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel) - fix AQL on mt76 devices with FW rate control and add a couple of AQL issues in mac80211 code (Felix) - fix authentication issue with mwifiex (Maximilian) - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro) - fix exception handling for multipath routes via same device (David Ahern) - revert back to a BH spin lock flavor for nsid_lock: there are paths which do require the BH context protection (Taehee) - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke) - fix ife module load deadlock (Cong) - make an adjustment to netlink reply message type for code added in this release (the sole change touching uAPI here) (Michal) - a number of fixes for small NXP and Microchip switches (Vladimir) [ Pull request acked by David: "you can expect more of this in the future as I try to delegate more things to Jakub" ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits) net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU net: Update MAINTAINERS for MediaTek switch driver net/mlx5e: mlx5e_fec_in_caps() returns a boolean net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock net/mlx5e: kTLS, Fix leak on resync error flow net/mlx5e: kTLS, Add missing dma_unmap in RX resync net/mlx5e: kTLS, Fix napi sync and possible use-after-free net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats() net/mlx5e: Fix multicast counter not up-to-date in "ip -s" net/mlx5e: Fix endianness when calculating pedit mask first bit net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported net/mlx5e: CT: Fix freeing ct_label mapping net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready net/mlx5e: Use synchronize_rcu to sync with NAPI net/mlx5e: Use RCU to protect rq->xdp_prog ...
2020-09-22Merge tag 'trace-v5.9-rc5' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Check kprobe is enabled before unregistering from ftrace as it isn't registered when disabled. - Remove kprobes enabled via command-line that is on init text when freed. - Add missing RCU synchronization for ftrace trampoline symbols removed from kallsyms. - Free trampoline on error path if ftrace_startup() fails. - Give more space for the longer PID numbers in trace output. - Fix a possible double free in the histogram code. - A couple of fixes that were discovered by sparse. * tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: init: make xbc_namebuf static kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot tracing: fix double free ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer tracing: Make the space reserved for the pid wider ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms ftrace: Free the trampoline when ftrace_startup() fails kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
2020-09-21net: phy: bcm7xxx: Add an entry for BCM72113Florian Fainelli1-0/+1
BCM72113 features a 28nm integrated EPHY, add an entry to the driver for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21bpf: Use a table to drive helper arg type checksLorenz Bauer1-0/+1
The mapping between bpf_arg_type and bpf_reg_type is encoded in a big hairy if statement that is hard to follow. The debug output also leaves to be desired: if a reg_type doesn't match we only print one of the options, instead printing all the valid ones. Convert the if statement into a table which is then used to drive type checking. If none of the reg_types match we print all options, e.g.: R2 type=rdonly_buf expected=fp, pkt, pkt_meta, map_value Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-12-lmb@cloudflare.com
2020-09-21bpf: Allow specifying a BTF ID per argument in function protosLorenz Bauer1-8/+10
Function prototypes using ARG_PTR_TO_BTF_ID currently use two ways to signal which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of IDs, one for each argument. This array is only accessed up to the highest numbered argument that uses ARG_PTR_TO_BTF_ID and may therefore be less than five arguments long. It usually points at a BTF_ID_LIST. Second, check_btf_id is a function pointer that is called by the verifier if present. It gets the actual BTF ID of the register, and the argument number we're currently checking. It turns out that the only user check_arg_btf_id ignores the argument, and is simply used to check whether the BTF ID has a struct sock_common at it's start. Replace both of these mechanisms with an explicit BTF ID for each argument in a function proto. Thanks to btf_struct_ids_match this is very flexible: check_arg_btf_id can be replaced by requiring struct sock_common. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-5-lmb@cloudflare.com
2020-09-21btf: Add BTF_ID_LIST_SINGLE macroLorenz Bauer1-0/+8
Add a convenience macro that allows defining a BTF ID list with a single item. This lets us cut down on repetitive macros. Suggested-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-4-lmb@cloudflare.com
2020-09-21btf: Make btf_set_contains take a const pointerLorenz Bauer1-1/+1
bsearch doesn't modify the contents of the array, so we can take a const pointer. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-2-lmb@cloudflare.com
2020-09-21Merge tag 'linux-can-next-for-5.10-20200921' of ↵David S. Miller3-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2020-09-21 this is a pull request of 38 patches for net-next. the first 5 patches are by Colin Ian King, Alexandre Belloni and me and they fix various spelling mistakes. The next patch is by me and fixes the indention in the CAN raw protocol according to the kernel coding style. Diego Elio Pettenò contributes two patches to fix dead links in CAN's Kconfig. Masahiro Yamada's patch removes the "WITH Linux-syscall-note" from SPDX tag of C files. AThe next 4 patches are by me and target the CAN device infrastructure and add error propagation and improve the output of various messages to ease driver development and debugging. YueHaibing's patch for the c_can driver removes an unused inline function. Next follows another patch by Colin Ian King, which removes the unneeded initialization of a variable in the mcba_usb driver. A patch by me annotates a fallthrough in the mscan driver. The ti_hecc driver is converted to use devm_platform_ioremap_resource_byname() in a patch by Dejin Zheng. Liu Shixin's patch converts the pcan_usb_pro driver to make use of le32_add_cpu() instead of open coding it. Wang Hai's patch for the peak_pciefd_main driver removes an unused makro. Vaibhav Gupta's patch converts the pch_can driver to generic power management. Stephane Grosjean improves the pcan_usb usb driver by first documenting the commands sent to the device and by adding support of rxerr/txerr counters. The next patch is by me and cleans up the Kconfig of the CAN SPI drivers. The next 6 patches all target the mcp251x driver, they are by Timo Schlüßler, Andy Shevchenko, Tim Harvey and me. They update the DT bindings documentation, sort the include files alphabetically, add GPIO support, make use of the readx_poll_timeout() helper, and add support for half duplex SPI-controllers. Wolfram Sang contributes a patch to update the contact email address in the mscan driver, while Zhang Changzhong updates the clock handling. The next patch is by and updates the rx-offload infrastructure to support callback less usage. The last 6 patches add support for the mcp25xxfd CAN SPI driver. First the dt-bindings are added by Oleksij Rempel, the regmap infrastructure and the main driver is contributed by me. Kurt Van Dijck adds listen-only support, Manivannan Sadhasivam adds himself as maintainer, and Thomas Kopp himself as a reviewer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21Merge tag 'mac80211-next-for-net-next-2020-09-21' of ↵David S. Miller4-87/+331
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * some AP-side infrastructure for FILS discovery and unsolicited probe resonses * a major rework of the encapsulation/header conversion offload from Felix, to fit better with e.g. AP_VLAN interfaces * performance fix for VHT A-MPDU size, don't limit to HT * some initial patches for S1G (sub 1 GHz) support, more will come in this area * minor cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAXJan Kara1-9/+8
dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy implementation should be defined only in !CONFIG_DAX case, not in !CONFIG_FS_DAX case. Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support") Cc: <stable@vger.kernel.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-21can: rx-offload: can_rx_offload_add_manual(): add new initialization functionMarc Kleine-Budde1-0/+3
This patch adds a new initialization function: can_rx_offload_add_manual() It should be used to add support rx-offload to a driver, if the callback mechanism should not be used. Use e.g. can_rx_offload_queue_sorted() to queue skbs into rx-offload. Link: https://lore.kernel.org/r/20200915223527.1417033-33-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: dev: can_put_echo_skb(): propagate error in case of errorsMarc Kleine-Budde1-2/+2
The function can_put_echo_skb() can fail for several reasons. It may fail due to OOM, but when it fails it's usually due to locking problems in the driver. In order to help developing and debugging of new drivers propagate error value in case of errors. Link: https://lore.kernel.org/r/20200915223527.1417033-12-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: include: fix spelling mistakesMarc Kleine-Budde2-2/+2
This patch fixes spelling erros found by "codespell" in the include/linux/can subtree. Link: https://lore.kernel.org/r/20200915223527.1417033-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-20net: dsa: tag_8021q: add VLANs to the master interface tooVladimir Oltean1-0/+2
The whole purpose of tag_8021q is to send VLAN-tagged traffic to the CPU, from which the driver can decode the source port and switch id. Currently this only works if the VLAN filtering on the master is disabled. Change that by explicitly adding code to tag_8021q.c to add the VLANs corresponding to the tags to the filter of the master interface. Because we now need to call vlan_vid_add, then we also need to hold the RTNL mutex. Propagate that requirement to the callers of dsa_8021q_setup and modify the existing call sites as appropriate. Note that one call path, sja1105_best_effort_vlan_filtering_set -> sja1105_vlan_filtering -> sja1105_setup_8021q_tagging, was already holding this lock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20Merge tag 'locking_urgent_for_v5.9_rc6' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: "Two fixes from the locking/urgent pile: - Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter Zijlstra) - Make percpu-rwsem operations on the semaphore's ->read_count IRQ-safe because it can be used in an IRQ context (Hou Tao)" * tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count locking/lockdep: Fix "USED" <- "IN-NMI" inversions
2020-09-20Merge tag 'libnvdimm-fixes-5.9-rc6' of ↵Linus Torvalds1-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A handful of fixes to address a string of mistakes in the mechanism for device-mapper to determine if its component devices are dax capable. - Fix an original bug in device-mapper table reference counting when interrogating dax capability in the component device. This bug was hidden by the following bug. - Fix device-mapper to use the proper helper (dax_supported() instead of the leaf helper generic_fsdax_supported()) to determine dax operation of a stacked block device configuration. The original implementation is only valid for one level of dax-capable block device stacking. This bug was discovered while fixing the below regression. - Fix an infinite recursion regression introduced by broken attempts to quiet the generic_fsdax_supported() path and make it bail out before logging "dax capability not found" errors" * tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix stack overflow when mounting fsdax pmem device dm: Call proper helper to determine dax support dm/dax: Fix table reference counts
Powered by cgit, Gruvboxed by Blaster4385.