aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2018-01-29Merge tag 'spi-nor/for-4.16' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon1-1/+11
Pull spi-nor changes from Cyrille Pitchen: " This pull-request contains the following notable changes: Core changes: * Add support to new ISSI and Cypress/Spansion memory parts. * Fix support of Micron memories by checking error bits in the FSR. * Fix update of block-protection bits by reading back the SR. * Restore the internal state of the SPI flash memory when removing the device. Driver changes: * Maintenance for Freescale, Intel and Metiatek drivers. * Add support of the direct access mode for the Cadence QSPI controller. "
2018-01-28NTB: Fix UB/bug in ntb_mw_get_align()Serge Semin1-1/+1
Simple (1 << pidx) operation causes undefined behaviour when pidx >= 32. It must be casted to u64 to match the actual return value of ntb_link_is_up() method, so to have all the possible peer indexes covered and to get rid of undefined behaviour. Additionally there are special macros in "linux/bitops.h" to perform the bit-set-shift operations, so it's recommended to have them used for proper bit setting. Signed-off-by: Serge Semin <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-01-28NTB: Rename NTB messaging API methodsSerge Semin1-18/+16
There is a common methods signature form used over all the NTB API like functions naming scheme, arguments names and order, etc. Recently added NTB messaging API IO callbacks were named a bit different so should be renamed to be in compliance with the rest of the API. Signed-off-by: Serge Semin <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-01-28ntb_hw_switchtec: Add initialization code for crosslinkLogan Gunthorpe1-6/+9
Crosslink is a feature of the Switchtec switches that is similar to the B2B mode of other NTB devices. It allows a system to be designed that is perfectly symmetric with two identical switches that link two hosts together. In order for the system to be symmetric, there is an empty host-less partition between the two switches which the host must enumerate and assign BAR addresses to. The firmware in the switch manages this specially so that the BAR addresses on both sides of the empty partition will be identical despite being in the same partition with the same address space. The driver determines whether crosslink is enabled by a flag set in the NTB partition info registers which are set by the switch's configuration file. When crosslink is enabled, a reserved LUT window is setup to point to the peer's switch's NTB registers and the local MWs are set to forward to the host-less partition's BARs. (Yes, this hurts my brain too.) Once this is setup, largely the same NTB infrastructure is used to communicate between the two hosts. Signed-off-by: Logan Gunthorpe <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-01-28ntb_hw_switchtec: Expand PFF CSR registersLogan Gunthorpe1-1/+14
The PFF CSR registers actual mirrors the PCI configuration space for all the ports in the switch. Previously, this was not needed by the driver but will be used by the crosslink code to enumerate the bus in an host-less centre partition. Signed-off-by: Logan Gunthorpe <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-01-28ntb_hw_switchtec: Allow using Switchtec NTB in multi-partition setupsKelvin Cao1-0/+8
Allow using Switchtec NTB in setups that have more than two partitions. Note: this does not enable having multi-host communication, it only allows for a single NTB link between two hosts in a network that might have more than two. Use following logic to determine the NT peer partition: 1) If there are 2 partitions, and the target vector is set in the Switchtec configuration, use the partition specified in target vector. 2) If there are 2 partitions and target vector is unset use the only other partition as specified in the NT EP map. 3) If there are more than 2 partitions and target vector is set use the other partition specified in target vector. 4) If there are more than 2 partitions and target vector is unset, this is invalid and report an error. Signed-off-by: Kelvin Cao <[email protected]> [[email protected]: commit message fleshed out] Signed-off-by: Logan Gunthorpe <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller4-9/+140
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-01-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) A number of extensions to tcp-bpf, from Lawrence. - direct R or R/W access to many tcp_sock fields via bpf_sock_ops - passing up to 3 arguments to bpf_sock_ops functions - tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks - optionally calling bpf_sock_ops program when RTO fires - optionally calling bpf_sock_ops program when packet is retransmitted - optionally calling bpf_sock_ops program when TCP state changes - access to tclass and sk_txhash - new selftest 2) div/mod exception handling, from Daniel. One of the ugly leftovers from the early eBPF days is that div/mod operations based on registers have a hard-coded src_reg == 0 test in the interpreter as well as in JIT code generators that would return from the BPF program with exit code 0. This was basically adopted from cBPF interpreter for historical reasons. There are multiple reasons why this is very suboptimal and prone to bugs. To name one: the return code mapping for such abnormal program exit of 0 does not always match with a suitable program type's exit code mapping. For example, '0' in tc means action 'ok' where the packet gets passed further up the stack, which is just undesirable for such cases (e.g. when implementing policy) and also does not match with other program types. After considering _four_ different ways to address the problem, we adapt the same behavior as on some major archs like ARMv8: X div 0 results in 0, and X mod 0 results in X. aarch64 and aarch32 ISA do not generate any traps or otherwise aborts of program execution for unsigned divides. Given the options, it seems the most suitable from all of them, also since major archs have similar schemes in place. Given this is all in the realm of undefined behavior, we still have the option to adapt if deemed necessary. 3) sockmap sample refactoring, from John. 4) lpm map get_next_key fixes, from Yonghong. 5) test cleanups, from Alexei and Prashant. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-01-28PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplateBjorn Helgaas2-20/+2
Add SPDX GPL-2.0+ to all PCI files that specified the GPL and allowed either GPL version 2 or any later version. Remove the boilerplate GPL version 2 or later language, relying on the assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") that the SPDX identifier may be used instead of the full boilerplate text. Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]>
2018-01-28PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplateBjorn Helgaas4-24/+4
Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license. Remove the boilerplate GPL version 2 language, relying on the assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") that the SPDX identifier may be used instead of the full boilerplate text. Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]>
2018-01-28Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single bug fix to prevent a subtle deadlock in the scheduler core code vs cpu hotplug" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix cpu.max vs. cpuhotplug deadlock
2018-01-27Merge branch 'timers/urgent' into timers/coreThomas Gleixner28-37/+178
Pick up urgent bug fix and resolve the conflict. Signed-off-by: Thomas Gleixner <[email protected]>
2018-01-27PCI/AER: Add uevents in AER and EEH error/resumeBryant G. Ly1-0/+36
Devices can go offline when erors reported. This patch adds a change to the kernel object and lets udev know of error. When device resumes, a change is also set reporting device as online. Therefore, EEH and AER events are better propagated to user space for PCI devices in all arches. Signed-off-by: Bryant G. Ly <[email protected]> Signed-off-by: Juan J. Alvarez <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Acked-by: Russell Currey <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-01-26Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and ↵Stephen Boyd1-0/+52
'clk-allwinner' into clk-next * clk-aspeed: clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs dt-bindings: clock: Add ASPEED constants * clk-lock-UP: clk: fix reentrancy of clk_enable() on UP systems * clk-mediatek: clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: mediatek: Fix all warnings for missing struct clk_onecell_data clk: mediatek: fixup test-building of MediaTek clock drivers clk: mediatek: group drivers under indpendent menu * clk-allwinner: clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU clk: sunxi-ng: add support for Allwinner H3 DE2 CCU dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3 clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL clk: sunxi-ng: Support fixed post-dividers on NM style clocks clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: Support fixed post-dividers on MP style clocks clk: sunxi: Use PTR_ERR_OR_ZERO()
2018-01-26Merge branches 'clk-remove-asm-clkdev', 'clk-debugfs-fixes', 'clk-renesas' ↵Stephen Boyd4-36/+74
and 'clk-meson' into clk-next * clk-remove-asm-clkdev: clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks arch: Remove clkdev.h asm-generic from Kbuild clk: Prepare to remove asm-generic/clkdev.h blackfin: Use generic clkdev.h header * clk-debugfs-fixes: clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: Improve flags doc for of_clk_detect_critical() * clk-renesas: clk: renesas: r8a7796: Add FDP clock clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend clk: renesas: mstp: Keep wakeup sources active during system suspend clk: renesas: r8a77970: Add LVDS clock * clk-meson: clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: meson-axg: make local symbol axg_gp0_params_table static clk: meson-axg: fix return value check in axg_clkc_probe() clk: meson: mpll: use 64-bit maths in params_from_rate clk: meson-axg: add clock controller drivers clk: meson-axg: add clocks dt-bindings required header dt-bindings: clock: add compatible variant for the Meson-AXG clk: meson: make the spinlock naming more specific clk: meson: gxbb: remove IGNORE_UNUSED from mmc clocks clk: meson: gxbb: fix wrong clock for SARADC/SANA
2018-01-26Merge branch 'clk-divider-container' into clk-nextStephen Boyd1-1/+1
* clk-divider-container: clk: divider: fix incorrect usage of container_of Plus fixup sprd/div.c to pass the width too.
2018-01-26bpf: make unknown opcode handling more robustDaniel Borkmann1-0/+2
Recent findings by syzcaller fixed in 7891a87efc71 ("bpf: arsh is not supported in 32 bit alu thus reject it") triggered a warning in the interpreter due to unknown opcode not being rejected by the verifier. The 'return 0' for an unknown opcode is really not optimal, since with BPF to BPF calls, this would go untracked by the verifier. Do two things here to improve the situation: i) perform basic insn sanity check early on in the verification phase and reject every non-uapi insn right there. The bpf_opcode_in_insntable() table reuses the same mapping as the jumptable in ___bpf_prog_run() sans the non-public mappings. And ii) in ___bpf_prog_run() we do need to BUG in the case where the verifier would ever create an unknown opcode due to some rewrites. Note that JITs do not have such issues since they would punt to interpreter in these situations. Moreover, the BPF_JIT_ALWAYS_ON would also help to avoid such unknown opcodes in the first place. Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-01-26Merge branches 'clk-at91', 'clk-imx7ulp', 'clk-axigen', 'clk-si5351' and ↵Stephen Boyd1-0/+2
'clk-pxa' into clk-next * clk-at91: clk: at91: pmc: Support backup for programmable clocks clk: at91: pmc: Save SCSR during suspend clk: at91: pmc: Wait for clocks when resuming * clk-imx7ulp: clk: Don't touch hardware when reparenting during registration * clk-axigen: clk: axi-clkgen: Round closest in round_rate() and recalc_rate() clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() * clk-si5351: clk: si5351: _si5351_clkout_reset_pll() can be static clk: si5351: Do not enable parent clocks on probe clk: si5351: Rename internal plls to avoid name collisions clk: si5351: Apply PLL soft reset before enabling the outputs clk: si5351: Add DT property to enable PLL reset clk: si5351: implement remove handler * clk-pxa: clk: pxa: unbreak lookup of CLK_POUT
2018-01-26Merge branches 'clk-spreadtrum', 'clk-mvebu-dvfs', 'clk-qoriq', 'clk-imx' ↵Stephen Boyd3-0/+664
and 'clk-qcom-ipq8074' into clk-next * clk-spreadtrum: clk: sprd: add clocks support for SC9860 clk: sprd: Add dt-bindings include file for SC9860 dt-bindings: Add Spreadtrum clock binding documentation clk: sprd: add adjustable pll support clk: sprd: add composite clock support clk: sprd: add divider clock support clk: sprd: add mux clock support clk: sprd: add gate clock support clk: sprd: Add common infrastructure clk: move clock common macros out from vendor directories * clk-mvebu-dvfs: clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS clk: mvebu: armada-37xx-periph: cosmetic changes * clk-qoriq: clk: qoriq: add more divider clocks support * clk-imx: clk: imx51: uart4, uart5 gates only exist on imx50, imx53 * clk-qcom-ipq8074: clk: qcom: ipq8074: add misc resets for PCIE and NSS dt-bindings: clock: qcom: add misc resets for PCIE and NSS clk: qcom: ipq8074: add GP and Crypto clocks clk: qcom: ipq8074: add NSS ethernet port clocks clk: qcom: ipq8074: add NSS clocks clk: qcom: ipq8074: add PCIE, USB and SDCC clocks clk: qcom: ipq8074: add remaining PLL’s dt-bindings: clock: qcom: add remaining clocks for IPQ8074 clk: qcom: ipq8074: fix missing GPLL0 divider width clk: qcom: add parent map for regmap mux clk: qcom: add read-only divider operations
2018-01-26Merge branches 'clk-qcom-alpha-pll', 'clk-check-ops-ptr', 'clk-protect-rate' ↵Stephen Boyd2-0/+63
and 'clk-omap' into clk-next * clk-qcom-alpha-pll: clk: qcom: add read-only alpha pll post divider operations clk: qcom: support for 2 bit PLL post divider clk: qcom: support Brammo type Alpha PLL clk: qcom: support Huayra type Alpha PLL clk: qcom: support for dynamic updating the PLL clk: qcom: support for alpha mode configuration clk: qcom: flag for 64 bit CONFIG_CTL clk: qcom: fix 16 bit alpha support calculation clk: qcom: support for alpha pll properties * clk-check-ops-ptr: clk: check ops pointer on clock register * clk-protect-rate: clk: fix set_rate_range when current rate is out of range clk: add clk_rate_exclusive api clk: cosmetic changes to clk_summary debugfs entry clk: add clock protection mechanism to clk core clk: use round rate to bail out early in set_rate clk: rework calls to round and determine rate callbacks clk: add clk_core_set_phase_nolock function clk: take the prepare lock out of clk_core_set_parent clk: fix incorrect usage of ENOSYS * clk-omap: clk: ti: Drop legacy clk-3xxx-legacy code
2018-01-26Input: mms114 - drop platform data and use generic APIsSimon Shields1-24/+0
The MMS114 platform data has no in-tree users, so drop it. Switch to using the standard touchscreen properties via touchscreen_parse_properties(), and move the old DT parsing code to use device_property_*() APIs. Finally, use touchscreen_report_pos to report x/y coordinates and drop the custom x/y inversion code. Signed-off-by: Simon Shields <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Tested-by: Andi Shyti <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2018-01-26Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/s3c64xx', ↵Mark Brown1-4/+2
'spi/topic/sh-msiof', 'spi/topic/sirf' and 'spi/topic/sun6i' into spi-next
2018-01-26Merge remote-tracking branch 'regulator/topic/core' into regulator-nextMark Brown2-10/+29
2018-01-26Merge branch 'master' of ↵David S. Miller2-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-01-26 One last patch for this development cycle: 1) Add ESN support for IPSec HW offload. From Yossef Efraim. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-01-26regulator: add PM suspend and resume hooksChunyan Zhang2-3/+12
In this patch, consumers are allowed to set suspend voltage, and this actually just set the "uV" in constraint::regulator_state, when the regulator_suspend_late() was called by PM core through callback when the system is entering into suspend, the regulator device would act suspend activity then. And it assumes that if any consumer set suspend voltage, the regulator device should be enabled in the suspend state. And if the suspend voltage of a regulator device for all consumers was set zero, the regulator device would be off in the suspend state. This patch also provides a new function hook to regulator devices for resuming from suspend states. Signed-off-by: Chunyan Zhang <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-01-26regulator: empty the old suspend functionsChunyan Zhang1-3/+2
Regualtor suspend/resume functions should only be called by PM suspend core via registering dev_pm_ops, and regulator devices should implement the callback functions. Thus, any regulator consumer shouldn't call the regulator suspend/resume functions directly. In order to avoid compile errors, two empty functions with the same name still be left for the time being. Signed-off-by: Chunyan Zhang <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-01-26regulator: leave one item to record whether regulator is enabledChunyan Zhang1-4/+15
The items "disabled" and "enabled" are a little redundant, since only one of them would be set to record if the regulator device should keep on or be switched to off in suspend states. So in this patch, the "disabled" was removed, only leave the "enabled": - enabled == 1 for regulator-on-in-suspend - enabled == 0 for regulator-off-in-suspend - enabled == -1 means do nothing when entering suspend mode. Signed-off-by: Chunyan Zhang <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-01-26module/retpoline: Warn about missing retpoline in moduleAndi Kleen1-0/+9
There's a risk that a kernel which has full retpoline mitigations becomes vulnerable when a module gets loaded that hasn't been compiled with the right compiler or the right option. To enable detection of that mismatch at module load time, add a module info string "retpoline" at build time when the module was compiled with retpoline support. This only covers compiled C source, but assembler source or prebuilt object files are not checked. If a retpoline enabled kernel detects a non retpoline protected module at load time, print a warning and report it in the sysfs vulnerability file. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: David Woodhouse <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-01-25openvswitch: add erspan version I and II supportWilliam Tu1-0/+1
The patch adds support for openvswitch to configure erspan v1 and v2. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added to uapi as a binary blob to support all ERSPAN v1 and v2's fields. Note that Previous commit "openvswitch: Add erspan tunnel support." was reverted since it does not design properly. Signed-off-by: William Tu <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-01-25net: erspan: create erspan metadata uapi headerWilliam Tu2-30/+54
The patch adds a new uapi header file, erspan.h, and moves the 'struct erspan_metadata' from internal erspan.h to it. Signed-off-by: William Tu <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-01-25net: erspan: use bitfield instead of mask and offsetWilliam Tu1-33/+94
Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-01-25pkt_cls: add new tc cls helper to check offload flag and chain indexJakub Kicinski1-0/+14
Very few (mlxsw) upstream drivers seem to allow offload of chains other than 0. Save driver developers typing and add a helper for checking both if ethtool's TC offload flag is on and if chain is 0. This helper will set the extack appropriately in both error cases. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-01-25bpf: Add BPF_SOCK_OPS_STATE_CBLawrence Brakmo1-1/+28
Adds support for calling sock_ops BPF program when there is a TCP state change. Two arguments are used; one for the old state and another for the new state. There is a new enum in include/uapi/linux/bpf.h that exports the TCP states that prepends BPF_ to the current TCP state names. If it is ever necessary to change the internal TCP state values (other than adding more to the end), then it will become necessary to convert from the internal TCP state value to the BPF value before calling the BPF sock_ops function. There are a set of compile checks added in tcp.c to detect if the internal and BPF values differ so we can make the necessary fixes. New op: BPF_SOCK_OPS_STATE_CB. Signed-off-by: Lawrence Brakmo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-01-25bpf: Add BPF_SOCK_OPS_RETRANS_CBLawrence Brakmo1-1/+8
Adds support for calling sock_ops BPF program when there is a retransmission. Three arguments are used; one for the sequence number, another for the number of segments retransmitted, and the last one for the return value of tcp_transmit_skb (0 => success). Does not include syn-ack retransmissions. New op: BPF_SOCK_OPS_RETRANS_CB. Signed-off-by: Lawrence Brakmo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-01-25bpf: Add support for reading sk_state and moreLawrence Brakmo1-0/+22
Add support for reading many more tcp_sock fields state, same as sk->sk_state rtt_min same as sk->rtt_min.s[0].v (current rtt_min) snd_ssthresh rcv_nxt snd_nxt snd_una mss_cache ecn_flags rate_delivered rate_interval_us packets_out retrans_out total_retrans segs_in data_segs_in segs_out data_segs_out lost_out sacked_out sk_txhash bytes_received (__u64) bytes_acked (__u64) Signed-off-by: Lawrence Brakmo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-01-25bpf: Add sock_ops RTO callbackLawrence Brakmo1-1/+7
Adds an optional call to sock_ops BPF program based on whether the BPF_SOCK_OPS_RTO_CB_FLAG is set in bpf_sock_ops_flags. The BPF program is passed 2 arguments: icsk_retransmits and whether the RTO has expired. Signed-off-by: Lawrence Brakmo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-01-25bpf: Adds field bpf_sock_ops_cb_flags to tcp_sockLawrence Brakmo2-1/+27
Adds field bpf_sock_ops_cb_flags to tcp_sock and bpf_sock_ops. Its primary use is to determine if there should be calls to sock_ops bpf program at various points in the TCP code. The field is initialized to zero, disabling the calls. A sock_ops BPF program can set it, per connection and as necessary, when the connection is established. It also adds support for reading and writting the field within a sock_ops BPF program. Reading is done by accessing the field directly. However, writing is done through the helper function bpf_sock_ops_cb_flags_set, in order to return an error if a BPF program is trying to set a callback that is not supported in the current kernel (i.e. running an older kernel). The helper function returns 0 if it was able to set all of the bits set in the argument, a positive number containing the bits that could not be set, or -EINVAL if the socket is not a full TCP socket. Examples of where one could call the bpf program: 1) When RTO fires 2) When a packet is retransmitted 3) When the connection terminates 4) When a packet is sent 5) When a packet is received Signed-off-by: Lawrence Brakmo <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-01-25bpf: Support passing args to sock_ops bpf functionLawrence Brakmo3-7/+39
Adds support for passing up to 4 arguments to sock_ops bpf functions. It reusues the reply union, so the bpf_sock_ops structures are not increased in size. Signed-off-by: Lawrence Brakmo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-01-25bpf: Add write access to tcp_sock and sock fieldsLawrence Brakmo2-1/+10
This patch adds a macro, SOCK_OPS_SET_FIELD, for writing to struct tcp_sock or struct sock fields. This required adding a new field "temp" to struct bpf_sock_ops_kern for temporary storage that is used by sock_ops_convert_ctx_access. It is used to store and recover the contents of a register, so the register can be used to store the address of the sk. Since we cannot overwrite the dst_reg because it contains the pointer to ctx, nor the src_reg since it contains the value we want to store, we need an extra register to contain the address of the sk. Also adds the macro SOCK_OPS_GET_OR_SET_FIELD that calls one of the GET or SET macros depending on the value of the TYPE field. Signed-off-by: Lawrence Brakmo <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-01-25fs/buffer.c: fold init_buffer() into init_page_buffers()Eric Biggers1-1/+0
Since commit e76004093db1 ("fs/buffer.c: remove unnecessary init operation after allocating buffer_head"), there are no callers of init_buffer() outside of init_page_buffers(). So just fold it into init_page_buffers(). Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Al Viro <[email protected]>
2018-01-25fs: fold __inode_permission() into inode_permission()Eric Biggers1-1/+0
Since commit 9c630ebefeee ("ovl: simplify permission checking"), overlayfs doesn't call __inode_permission() anymore, which leaves no users other than inode_permission(). So just fold it back into inode_permission(). Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Al Viro <[email protected]>
2018-01-25fs: add RWF_APPENDJürg Billeter2-1/+7
This is the per-I/O equivalent of O_APPEND to support atomic append operations on any open file. If a file is opened with O_APPEND, pwrite() ignores the offset and always appends data to the end of the file. RWF_APPEND enables atomic append and pwrite() with offset on a single file descriptor. Signed-off-by: Jürg Billeter <[email protected]> Signed-off-by: Al Viro <[email protected]>
2018-01-25f2fs: support inode creation timeChao Yu1-1/+3
This patch adds creation time field in inode layout to support showing kstat.btime in ->statx. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2018-01-25Merge branch 'for-upstream' of ↵David S. Miller1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-01-25 Here's one last bluetooth-next pull request for the 4.16 kernel: - Improved support for Intel controllers - New set_parity method to serdev (agreed with maintainers to be taken through bluetooth-next) - Fix error path in hci_bcm (missing call to serdev close) - New ID for BCM4343A0 UART controller Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-01-25net: don't call update_pmtu unconditionallyNicolas Dichtel1-0/+8
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to: "BUG: unable to handle kernel NULL pointer dereference at (null)" Let's add a helper to check if update_pmtu is available before calling it. Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") CC: Roman Kapl <[email protected]> CC: Xin Long <[email protected]> Signed-off-by: Nicolas Dichtel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-01-25net: tcp: close sock if net namespace is exitingDan Streetman1-0/+10
When a tcp socket is closed, if it detects that its net namespace is exiting, close immediately and do not wait for FIN sequence. For normal sockets, a reference is taken to their net namespace, so it will never exit while the socket is open. However, kernel sockets do not take a reference to their net namespace, so it may begin exiting while the kernel socket is still open. In this case if the kernel socket is a tcp socket, it will stay open trying to complete its close sequence. The sock's dst(s) hold a reference to their interface, which are all transferred to the namespace's loopback interface when the real interfaces are taken down. When the namespace tries to take down its loopback interface, it hangs waiting for all references to the loopback interface to release, which results in messages like: unregister_netdevice: waiting for lo to become free. Usage count = 1 These messages continue until the socket finally times out and closes. Since the net namespace cleanup holds the net_mutex while calling its registered pernet callbacks, any new net namespace initialization is blocked until the current net namespace finishes exiting. After this change, the tcp socket notices the exiting net namespace, and closes immediately, releasing its dst(s) and their reference to the loopback interface, which lets the net namespace continue exiting. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811 Signed-off-by: Dan Streetman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-01-25PCI: Make of_irq_parse_pci() staticRob Herring1-6/+0
Now that the DT PCI code is merged into drivers/pci, of_irq_parse_pci() can be static. Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Frank Rowand <[email protected]>
2018-01-26crypto: sha3-generic - export init/update/final routinesArd Biesheuvel1-0/+5
To allow accelerated implementations to fall back to the generic routines, e.g., in contexts where a SIMD based implementation is not allowed to run, expose the generic SHA3 init/update/final routines to other modules. Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2018-01-26crypto: sha3-generic - simplify codeArd Biesheuvel1-1/+0
In preparation of exposing the generic SHA3 implementation to other versions as a fallback, simplify the code, and remove an inconsistency in the output handling (endian swabbing rsizw words of state before writing the output does not make sense) Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2018-01-25device property: Define type of PROPERTY_ENRTY_*() macrosAndy Shevchenko1-5/+5
Some of the drivers may use the macro at runtime flow, like struct property_entry p[10]; ... p[index++] = PROPERTY_ENTRY_U8("u8 property", u8_data); In that case and absence of the data type compiler fails the build: drivers/char/ipmi/ipmi_dmi.c:79:29: error: Expected ; at end of statement drivers/char/ipmi/ipmi_dmi.c:79:29: error: got { Acked-by: Corey Minyard <[email protected]> Cc: Corey Minyard <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-01-24Merge branch 'rebased-net-ioctl' of ↵David S. Miller5-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.