| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The enumeration allows us to keep track of the last
io_uring_register(2) opcode available.
Behaviour and opcodes names don't change.
Signed-off-by: Stefano Garzarella <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add a redirect_neigh() helper as redirect() drop-in replacement
for the xmit side. Main idea for the helper is to be very similar
in semantics to the latter just that the skb gets injected into
the neighboring subsystem in order to let the stack do the work
it knows best anyway to populate the L2 addresses of the packet
and then hand over to dev_queue_xmit() as redirect() does.
This solves two bigger items: i) skbs don't need to go up to the
stack on the host facing veth ingress side for traffic egressing
the container to achieve the same for populating L2 which also
has the huge advantage that ii) the skb->sk won't get orphaned in
ip_rcv_core() when entering the IP routing layer on the host stack.
Given that skb->sk neither gets orphaned when crossing the netns
as per 9c4c325252c5 ("skbuff: preserve sock reference when scrubbing
the skb.") the helper can then push the skbs directly to the phys
device where FQ scheduler can do its work and TCP stack gets proper
backpressure given we hold on to skb->sk as long as skb is still
residing in queues.
With the helper used in BPF data path to then push the skb to the
phys device, I observed a stable/consistent TCP_STREAM improvement
on veth devices for traffic going container -> host -> host ->
container from ~10Gbps to ~15Gbps for a single stream in my test
environment.
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Cc: David Ahern <[email protected]>
Link: https://lore.kernel.org/bpf/f207de81629e1724899b73b8112e0013be782d35.1601477936.git.daniel@iogearbox.net
|
|
Similarly to 5a52ae4e32a6 ("bpf: Allow to retrieve cgroup v1 classid
from v2 hooks"), add a helper to retrieve cgroup v1 classid solely
based on the skb->sk, so it can be used as key as part of BPF map
lookups out of tc from host ns, in particular given the skb->sk is
retained these days when crossing net ns thanks to 9c4c325252c5
("skbuff: preserve sock reference when scrubbing the skb."). This
is similar to bpf_skb_cgroup_id() which implements the same for v2.
Kubernetes ecosystem is still operating on v1 however, hence net_cls
needs to be used there until this can be dropped in with the v2
helper of bpf_skb_cgroup_id().
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/ed633cf27a1c620e901c5aa99ebdefb028dce600.1601477936.git.daniel@iogearbox.net
|
|
Enables storing userdata for nft_chain. Field udata points to user data
and udlen stores its length.
Adds new attribute flag NFTA_CHAIN_USERDATA.
Signed-off-by: Jose M. Guisado Gomez <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Update uAPI documentation to deprecate v1 structs and ioctls.
Signed-off-by: Kent Gibson <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Add a new version of the uAPI to address existing 32/64-bit alignment
issues, add support for debounce and event sequence numbers, allow
requested lines with different configurations, and provide some future
proofing by adding padding reserved for future use.
The alignment issue relates to the gpioevent_data, which packs to different
sizes on 32-bit and 64-bit platforms. That creates problems for 32-bit apps
running on 64-bit kernels. uAPI v2 addresses that particular issue, and
the problem more generally, by adding pad fields that explicitly pad
structs out to 64-bit boundaries, so they will pack to the same size now,
and even if some of the reserved padding is used for __u64 fields in the
future.
The new structs have been analysed with pahole to ensure that they
are sized as expected and contain no implicit padding.
The lack of future proofing in v1 makes it impossible to, for example,
add the debounce feature that is included in v2.
The future proofing is addressed by providing configurable attributes in
line config and reserved padding in all structs for future features.
Specifically, the line request, config, info, info_changed and event
structs receive updated versions and new ioctls.
As the majority of the structs and ioctls were being replaced, it is
opportune to rework some of the other aspects of the uAPI:
v1 has three different flags fields, each with their own separate
bit definitions. In v2 that is collapsed to one - gpio_v2_line_flag.
The handle and event requests are merged into a single request, the line
request, as the two requests were mostly the same other than the edge
detection provided by event requests. As a byproduct, the v2 uAPI allows
for multiple lines producing edge events on the same line handle.
This is a new capability as v1 only supports a single line in an event
request.
As a consequence, there are now only two types of file handle to be
concerned with, the chip and the line, and it is clearer which ioctls
apply to which type of handle.
There is also some minor renaming of fields for consistency compared to
their v1 counterparts, e.g. offset rather than lineoffset or line_offset,
and consumer rather than consumer_label.
Additionally, v1 GPIOHANDLES_MAX becomes GPIO_V2_LINES_MAX in v2 for
clarity, and the gpiohandle_data __u8 array becomes a bitmap in
gpio_v2_line_values.
The v2 uAPI is mostly a reorganisation and extension of v1, so userspace
code, particularly libgpiod, should readily port to it.
Signed-off-by: Kent Gibson <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Replace constant array sizes with a macro constant to clarify the source
of array sizes, provide a place to document any constraints on the size,
and to simplify array sizing in userspace if constructing structs
from their composite fields.
Signed-off-by: Kent Gibson <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
We encountered this issue when booting blob with a 32-bit kernel.
The implementation doesn't match v6 of the virtio-spec change, so fix
this.
Fixes: ff886cbdcc44 ("virtio-gpu api: blob resources")
Signed-off-by: Alistair Delva <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
Commit 5d5b4128c4ca ("devlink: introduce flash update overwrite mask")
added a usage of _BITUL to the UAPI <linux/devlink.h> header, but failed
to include the header file where it was defined. It happens that this
does not break any existing kernel include chains because it gets
included through other sources. However, when including the UAPI headers
in a userspace application (such as devlink in iproute2), _BITUL is not
defined.
Fixes: 5d5b4128c4ca ("devlink: introduce flash update overwrite mask")
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
DM depends on these block 5.10 commits:
22ada802ede8 block: use lcm_not_zero() when stacking chunk_sectors
07d098e6bbad block: allow 'chunk_sectors' to be non-power-of-2
021a24460dc2 block: add QUEUE_FLAG_NOWAIT
6abc49468eea dm: add support for REQ_NOWAIT and enable it for linear target
Signed-off-by: Mike Snitzer <[email protected]>
|
|
When an L2TPv3 session receives a data frame with an incorrect cookie
l2tp_core logs a warning message and bumps a stats counter to reflect
the fact that the packet has been dropped.
However, the stats counter in question is missing from the l2tp_netlink
get message for tunnel and session instances.
Include the statistic in the netlink get response.
Signed-off-by: Tom Parkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This enables support for attaching freplace programs to multiple attach
points. It does this by amending the UAPI for bpf_link_Create with a target
btf ID that can be used to supply the new attachment point along with the
target program fd. The target must be compatible with the target that was
supplied at program load time.
The implementation reuses the checks that were factored out of
check_attach_btf_id() to ensure compatibility between the BTF types of the
old and new attachment. If these match, a new bpf_tracing_link will be
created for the new attach target, allowing multiple attachments to
co-exist simultaneously.
The code could theoretically support multiple-attach of other types of
tracing programs as well, but since I don't have a use case for any of
those, there is no API support for doing so.
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
PCI devices support two variants of the D3 power state: D3hot (main power
present) D3cold (main power removed). Previously struct pci_dev contained:
unsigned int d3_delay; /* D3->D0 transition time in ms */
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
"d3_delay" refers specifically to the D3hot state. Rename it to
"d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for
Specifying Device Readiness Durations" in the PCI Firmware spec r3.2,
sec 4.6.9.
There is no change to the functionality.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
This feature was recently added to virtio-gpu, lets make
it userspace queryable. It's an error to use
BLOB_FLAG_USE_CROSS_DEVICE when this feature is not present.
Signed-off-by: Gurchetan Singh <[email protected]>
Acked-by: Tomeu Vizoso <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
This exposes the host visible feature to userspace. Without it,
it is an error to specify BLOB_MEM_HOST3D with
BLOG_FLAG_USE_MAPPABLE.
Signed-off-by: Gurchetan Singh <[email protected]>
Acked-by: Tomeu Vizoso <[email protected]>
Acked-by: Lingfeng Yang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
This makes blob resources available to guest userspace. They are needed
for GL4.5, Vulkan and zero-copy virtio-gpu.
For Mesa, blob resources have been tested with Piglit's ARB_buffer_storage
tests and apitraces. Apitraces of GL4.5 games show we're between 70%
to 80% of host performance on Iris, based on a apitrace of a 2013 GL4.5
game:
11.204 FPS (guest)
15.947 FPS (host)
This is still better than the status quo, when said game was unplayable
with Virgl due to an inefficient GL4.3 fallback. But there's still room
for improvement if we want to match HW-assisted virtualization.
For Vulkan, blob resources have been tested with dEQP.vk.memory* and
running Vulkan applications in production with the "Cuttlefish" virtual
Android device. This has been done with Lingfeng Yang's "gfxstream"
Vulkan implementation, which virtualizes Vulkan across many Google
products.
Signed-off-by: Gurchetan Singh <[email protected]>
Acked-by: Tomeu Vizoso <[email protected]>
Acked-by: Chia-I Wu <[email protected]>
Acked-by: Lingfeng Yang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
|
|
This patch adds a new virtgpu feature that allows directly
mapping host allocated resources.
This is based on virtio shared memory regions, which allows
querying for memory regions using PCI transport. Each shared
memory region has an associated "shmid", the meaning of which
is device specific.
For virtio-gpu, we can define the shared memory region with id
VIRTIO_GPU_SHM_ID_HOST_VISIBLE to be the "host visible memory
region".
The presence of the host visible memory region means the following
hypercalls are supported:
1) VIRTIO_GPU_CMD_RESOURCE_MAP_BLOB
This hypercall tells the host to inject the host resource's
mapping in an offset into virtio-gpu's PCI address space.
This is typically done via KVM_SET_USER_MEMORY_REGION on Linux
hosts.
On success, VIRTIO_GPU_RESP_OK_MAP_INFO is returned, which
specifies the host buffer's caching type and possibly in the
future performance hints about the buffer..
2) VIRTIO_GPU_CMD_RESOURCE_UNMAP_BLOB
This hypercall tells the host to remove the host resource's
mapping from the guest VM.
Signed-off-by: Gerd Hoffmann <[email protected]>
Acked-by: Tomeu Vizoso <[email protected]>
Acked-by: Lingfeng Yang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Co-developed-by: Gurchetan Singh <[email protected]>
Signed-off-by: Gurchetan Singh <[email protected]>
|
|
A blob resource is a container for:
- VIRTIO_GPU_BLOB_MEM_GUEST: a guest memory allocation
(referred to as a "guest-only blob resource")
- VIRTIO_GPU_BLOB_MEM_HOST3D: a host3d memory allocation
(referred to as a "host-only blob resource")
- VIRTIO_GPU_BLOB_MEM_HOST3D_GUEST: a guest + host3d memory allocation
(referred to as a "default blob resource").
The memory properties of the blob resource must be described by
`blob_mem`.
For default and guest only blob resources set, `nents` guest system
pages are assigned to the resource. For default blob resources,
these guest pages are used for transfer operations. Attach/detach is
also possible to allow swap-in/swap-out, but isn't required since it
may not be applicable to future blob mem types
(shared guest/guest vram).
Host allocations depend on whether the 3D is supported. If 3D is not
supported, the only valid field for `blob_mem` is
VIRTIO_GPU_BLOB_MEM_GUEST.
If 3D is supported, the virtio-gpu resource is created from the
context local object identified by the `blob_id`. The actual host
allocation done by the CMD_SUBMIT_3D.
Userspace must specify if the blob resource is intended to be used
for userspace mapping, sharing between virtio-gpu contexts and/or
sharing between virtio devices. This is done via `blob_flags`.
For 3D hosts, both VIRTIO_GPU_CMD_TRANSFER_TO_HOST_3D and
VIRTIO_GPU_CMD_TRANSFER_FROM_HOST_3D may be used to update
the host resource. There is no restriction on the image/buffer
view the guest/host userspace has on the blob resource.
VIRTIO_GPU_CMD_SET_SCANOUT_BLOB / VIRTIO_GPU_CMD_RESOURCE_FLUSH may
be used with blob resources as well. The modifier is intentionally
left out of SCANOUT_BLOB, and auxilary blobs are also left out
as a simplification.
The use case for blob resources is zero-copy, needed for coherent
memory in virglrenderer. Host only blob resources are not mappable
without the feature described in the next patch, but are shareable.
Future work:
- Emulated coherent `blob_mem` type for QEMU/vhost-user
- A `blob_mem` type for guest-only resources imported in
cache-coherent FOSS GPU/display drivers.
- Display integration involving the blob model using seamless
Wayland windows.
Signed-off-by: Gerd Hoffmann <[email protected]>
Acked-by: Tomeu Vizoso <[email protected]>
Acked-by: Chia-I Wu <[email protected]>
Acked-by: Lingfeng Yang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Co-developed-by: Gurchetan Singh <[email protected]>
Signed-off-by: Gurchetan Singh <[email protected]>
|
|
A helper is added to allow seq file writing of kernel data
structures using vmlinux BTF. Its signature is
long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr,
u32 btf_ptr_size, u64 flags);
Flags and struct btf_ptr definitions/use are identical to the
bpf_snprintf_btf helper, and the helper returns 0 on success
or a negative error value.
Suggested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
A helper is added to support tracing kernel type information in BPF
using the BPF Type Format (BTF). Its signature is
long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr,
u32 btf_ptr_size, u64 flags);
struct btf_ptr * specifies
- a pointer to the data to be traced
- the BTF id of the type of data pointed to
- a flags field is provided for future use; these flags
are not to be confused with the BTF_F_* flags
below that control how the btf_ptr is displayed; the
flags member of the struct btf_ptr may be used to
disambiguate types in kernel versus module BTF, etc;
the main distinction is the flags relate to the type
and information needed in identifying it; not how it
is displayed.
For example a BPF program with a struct sk_buff *skb
could do the following:
static struct btf_ptr b = { };
b.ptr = skb;
b.type_id = __builtin_btf_type_id(struct sk_buff, 1);
bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0);
Default output looks like this:
(struct sk_buff){
.transport_header = (__u16)65535,
.mac_header = (__u16)65535,
.end = (sk_buff_data_t)192,
.head = (unsigned char *)0x000000007524fd8b,
.data = (unsigned char *)0x000000007524fd8b,
.truesize = (unsigned int)768,
.users = (refcount_t){
.refs = (atomic_t){
.counter = (int)1,
},
},
}
Flags modifying display are as follows:
- BTF_F_COMPACT: no formatting around type information
- BTF_F_NONAME: no struct/union member names/types
- BTF_F_PTR_RAW: show raw (unobfuscated) pointer values;
equivalent to %px.
- BTF_F_ZERO: show zero-valued struct/union members;
they are not displayed by default
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs
the target program on a specific CPU. This is achieved by a new flag in
bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program
is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for
BPF programs that handle perf_event and other percpu resources, as the
program can access these resource locally.
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Allow the user to configure below Spatial Reuse Parameter Set element.
* Non-SRG OBSS PD Max Offset
* SRG BSS Color Bitmap
* SRG Partial BSSID Bitmap
Signed-off-by: Rajkumar Manoharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Recently channels gained a potential frequency offset, so
include this in the per-channel survey info.
Signed-off-by: Thomas Pedersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[add the offset only if non-zero]
Signed-off-by: Johannes Berg <[email protected]>
|
|
It's not desireable to have all MSRs always handled by KVM kernel space. Some
MSRs would be useful to handle in user space to either emulate behavior (like
uCode updates) or differentiate whether they are valid based on the CPU model.
To allow user space to specify which MSRs it wants to see handled by KVM,
this patch introduces a new ioctl to push filter rules with bitmaps into
KVM. Based on these bitmaps, KVM can then decide whether to reject MSR access.
With the addition of KVM_CAP_X86_USER_SPACE_MSR it can also deflect the
denied MSR events to user space to operate on.
If no filter is populated, MSR handling stays identical to before.
Signed-off-by: Alexander Graf <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
MSRs are weird. Some of them are normal control registers, such as EFER.
Some however are registers that really are model specific, not very
interesting to virtualization workloads, and not performance critical.
Others again are really just windows into package configuration.
Out of these MSRs, only the first category is necessary to implement in
kernel space. Rarely accessed MSRs, MSRs that should be fine tunes against
certain CPU models and MSRs that contain information on the package level
are much better suited for user space to process. However, over time we have
accumulated a lot of MSRs that are not the first category, but still handled
by in-kernel KVM code.
This patch adds a generic interface to handle WRMSR and RDMSR from user
space. With this, any future MSR that is part of the latter categories can
be handled in user space.
Furthermore, it allows us to replace the existing "ignore_msrs" logic with
something that applies per-VM rather than on the full system. That way you
can run productive VMs in parallel to experimental ones where you don't care
about proper MSR handling.
Signed-off-by: Alexander Graf <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
NL80211_ATTR_S1G_CAPABILITY can be passed along with
NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE
to indicate S1G capabilities which should override the
hardware capabilities in eg. the association request.
Signed-off-by: Thomas Pedersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[johannes: always require both attributes together, commit message]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Support 6 GHz scanning, by
* a new scan flag to scan for colocated BSSes advertised
by (and found) APs on 2.4 & 5 GHz
* doing the necessary reduced neighbor report parsing for
this, to find them
* adding the ability to split the scan request in case the
device by itself cannot support this.
Also add some necessary bits in mac80211 to not break with
these changes.
Signed-off-by: Tova Mussai <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This patch extends the CSC API in video devices to be supported
also on sub-devices. The flag V4L2_MBUS_FRAMEFMT_SET_CSC set by
the application when calling VIDIOC_SUBDEV_S_FMT ioctl.
The flags:
V4L2_SUBDEV_MBUS_CODE_CSC_COLORSPACE,
V4L2_SUBDEV_MBUS_CODE_CSC_XFER_FUNC,
V4L2_SUBDEV_MBUS_CODE_CSC_YCBCR_ENC/V4L2_SUBDEV_MBUS_CODE_CSC_HSV_ENC
V4L2_SUBDEV_MBUS_CODE_CSC_QUANTIZATION
are set by the driver in the VIDIOC_SUBDEV_ENUM_MBUS_CODE ioctl.
New 'flags' fields were added to the structs
v4l2_subdev_mbus_code_enum, v4l2_mbus_framefmt which are borrowed
from the 'reserved' field
The patch also replaces the 'ycbcr_enc' field in
'struct v4l2_mbus_framefmt' with a union that includes 'hsv_enc'
Signed-off-by: Dafna Hirschfeld <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
For video capture it is the driver that reports the colorspace,
transfer function, Y'CbCr/HSV encoding and quantization range
used by the video, and there is no way to request something
different, even though many HDTV receivers have some sort of
colorspace conversion capabilities.
For output video this feature already exists since the application
specifies this information for the video format it will send out, and
the transmitter will enable any available CSC if a format conversion has
to be performed in order to match the capabilities of the sink.
For video capture we propose adding new v4l2_pix_format flag:
V4L2_PIX_FMT_FLAG_SET_CSC. The flag is set by the application,
the driver will interpret the colorspace, xfer_func, ycbcr_enc/hsv_enc
and quantization fields as the requested colorspace information and will
attempt to do the conversion it supports.
Drivers set the flags
V4L2_FMT_FLAG_CSC_COLORSPACE,
V4L2_FMT_FLAG_CSC_XFER_FUNC,
V4L2_FMT_FLAG_CSC_YCBCR_ENC/V4L2_FMT_FLAG_CSC_HSV_ENC,
V4L2_FMT_FLAG_CSC_QUANTIZATION,
in the flags field of the struct v4l2_fmtdesc during enumeration to
indicate that they support colorspace conversion for the respective field.
Drivers do not have to actually look at the flags. If the flags are not
set, then the fields 'colorspace', 'xfer_func', 'ycbcr_enc/hsv_enc',
and 'quantization' are set to the default values by the core, i.e. just
pass on the received format without conversion.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Dafna Hirschfeld <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Sections of device flash may contain settings or device identifying
information. When performing a flash update, it is generally expected
that these settings and identifiers are not overwritten.
However, it may sometimes be useful to allow overwriting these fields
when performing a flash update. Some examples include, 1) customizing
the initial device config on first programming, such as overwriting
default device identifying information, or 2) reverting a device
configuration to known good state provided in the new firmware image, or
3) in case it is suspected that current firmware logic for managing the
preservation of fields during an update is broken.
Although some devices are able to completely separate these types of
settings and fields into separate components, this is not true for all
hardware.
To support controlling this behavior, a new
DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK is defined. This is an
nla_bitfield32 which will define what subset of fields in a component
should be overwritten during an update.
If no bits are specified, or of the overwrite mask is not provided, then
an update should not overwrite anything, and should maintain the
settings and identifiers as they are in the previous image.
If the overwrite mask has the DEVLINK_FLASH_OVERWRITE_SETTINGS bit set,
then the device should be configured to overwrite any of the settings in
the requested component with settings found in the provided image.
Similarly, if the DEVLINK_FLASH_OVERWRITE_IDENTIFIERS bit is set, the
device should be configured to overwrite any device identifiers in the
requested component with the identifiers from the image.
Multiple overwrite modes may be combined to indicate that a combination
of the set of fields that should be overwritten.
Drivers which support the new overwrite mask must set the
DEVLINK_SUPPORT_FLASH_UPDATE_OVERWRITE_MASK in the
supported_flash_update_params field of their devlink_ops.
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch changes the bpf_sk_assign() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
The bpf_sk_lookup_assign() is taking ARG_PTR_TO_SOCKET_"OR_NULL". Meaning
it specifically takes a literal NULL. ARG_PTR_TO_BTF_ID_SOCK_COMMON
does not allow a literal NULL, so another ARG type is required
for this purpose and another follow-up patch can be used if
there is such need.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch changes the bpf_tcp_*_syncookie() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Lorenz Bauer <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch changes the bpf_sk_storage_*() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
A micro benchmark has been done on a "cgroup_skb/egress" bpf program
which does a bpf_sk_storage_get(). It was driven by netperf doing
a 4096 connected UDP_STREAM test with 64bytes packet.
The stats from "kernel.bpf_stats_enabled" shows no meaningful difference.
The sk_storage_get_btf_proto, sk_storage_delete_btf_proto,
btf_sk_storage_get_proto, and btf_sk_storage_delete_proto are
no longer needed, so they are removed.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Lorenz Bauer <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
ARG_PTR_TO_BTF_ID_SOCK_COMMON
The previous patch allows the networking bpf prog to use the
bpf_skc_to_*() helpers to get a PTR_TO_BTF_ID socket pointer,
e.g. "struct tcp_sock *". It allows the bpf prog to read all the
fields of the tcp_sock.
This patch changes the bpf_sk_release() and bpf_sk_*cgroup_id()
to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will
work with the pointer returned by the bpf_skc_to_*() helpers
also. For example, the following will work:
sk = bpf_skc_lookup_tcp(skb, tuple, tuplen, BPF_F_CURRENT_NETNS, 0);
if (!sk)
return;
tp = bpf_skc_to_tcp_sock(sk);
if (!tp) {
bpf_sk_release(sk);
return;
}
lsndtime = tp->lsndtime;
/* Pass tp to bpf_sk_release() will also work */
bpf_sk_release(tp);
Since PTR_TO_BTF_ID could be NULL, the helper taking
ARG_PTR_TO_BTF_ID_SOCK_COMMON has to check for NULL at runtime.
A btf_id of "struct sock" may not always mean a fullsock. Regardless
the helper's running context may get a non-fullsock or not,
considering fullsock check/handling is pretty cheap, it is better to
keep the same verifier expectation on helper that takes ARG_PTR_TO_BTF_ID*
will be able to handle the minisock situation. In the bpf_sk_*cgroup_id()
case, it will try to get a fullsock by using sk_to_full_sk() as its
skb variant bpf_sk"b"_*cgroup_id() has already been doing.
bpf_sk_release can already handle minisock, so nothing special has to
be done.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patchset is based on Google-internal RSEQ work done by Paul
Turner and Andrew Hunter.
When working with per-CPU RSEQ-based memory allocations, it is
sometimes important to make sure that a global memory location is no
longer accessed from RSEQ critical sections. For example, there can be
two per-CPU lists, one is "active" and accessed per-CPU, while another
one is inactive and worked on asynchronously "off CPU" (e.g. garbage
collection is performed). Then at some point the two lists are
swapped, and a fast RCU-like mechanism is required to make sure that
the previously active list is no longer accessed.
This patch introduces such a mechanism: in short, membarrier() syscall
issues an IPI to a CPU, restarting a potentially active RSEQ critical
section on the CPU.
Signed-off-by: Peter Oskolkov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Mathieu Desnoyers <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Extend the user-space RNG interface:
1. Add entropy input via ALG_SET_DRBG_ENTROPY setsockopt option;
2. Add additional data input via sendmsg syscall.
This allows DRBG to be tested with test vectors, for example for the
purpose of CAVP testing, which otherwise isn't possible.
To prevent erroneous use of entropy input, it is hidden under
CRYPTO_USER_API_RNG_CAVP config option and requires CAP_SYS_ADMIN to
succeed.
Signed-off-by: Elena Petrova <[email protected]>
Acked-by: Stephan Müller <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Currently, we use length of DSACKed range to compute number of
delivered packets. And if sequence range in DSACK is corrupted,
we can get bogus dsacked/acked count, and bogus cwnd.
This patch put bounds on DSACKed range to skip update of data
delivery and spurious retransmission information, if the DSACK
is unlikely caused by sender's action:
- DSACKed range shouldn't be greater than maximum advertised rwnd.
- Total no. of DSACKed segments shouldn't be greater than total
no. of retransmitted segs. Unlike spurious retransmits, network
duplicates or corrupted DSACKs shouldn't be counted as delivery.
Signed-off-by: Priyaranjan Jha <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
* for-5.10/block: (140 commits)
bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag
bdi: invert BDI_CAP_NO_ACCT_WB
bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag
mm: use SWP_SYNCHRONOUS_IO more intelligently
bdi: remove BDI_CAP_SYNCHRONOUS_IO
bdi: remove BDI_CAP_CGROUP_WRITEBACK
block: lift setting the readahead size into the block layer
md: update the optimal I/O size on reshape
bdi: initialize ->ra_pages and ->io_pages in bdi_init
aoe: set an optimal I/O size
bcache: inherit the optimal I/O size
drbd: remove dead code in device_to_statistics
fs: remove the unused SB_I_MULTIROOT flag
block: mark blkdev_get static
PM: mm: cleanup swsusp_swap_check
mm: split swap_type_of
PM: rewrite is_hibernate_resume_dev to not require an inode
mm: cleanup claim_swapfile
ocfs2: cleanup o2hb_region_dev_store
dasd: cleanup dasd_scan_partitions
...
|
|
The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wenpeng Liang <[email protected]>
Signed-off-by: Weihang Li <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression at the CEC adapter core
- two uAPI patches (one revert) for changes in this development cycle
* tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dt-bindings: media: imx274: Convert to json-schema
media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag
media: cec-adap.c: don't use flush_scheduled_work()
|
|
When excluding S,G entries we need a way to block a particular S,G,port.
The new port group flag is managed based on the source's timer as per
RFCs 3376 and 3810. When a source expires and its port group is in
EXCLUDE mode, it will be blocked.
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We need to handle group filter mode transitions and initial state.
To change a port group's INCLUDE -> EXCLUDE mode (or when we have added
a new port group in EXCLUDE mode) we need to add that port to all of
*,G ports' S,G entries for proper replication. When the EXCLUDE state is
changed from IGMPv3 report, br_multicast_fwd_filter_exclude() must be
called after the source list processing because the assumption is that
all of the group's S,G entries will be created before transitioning to
EXCLUDE mode, i.e. most importantly its blocked entries will already be
added so it will not get automatically added to them.
The transition EXCLUDE -> INCLUDE happens only when a port group timer
expires, it requires us to remove that port from all of *,G ports' S,G
entries where it was automatically added previously.
Finally when we are adding a new S,G entry we must add all of *,G's
EXCLUDE ports to it.
In order to distinguish automatically added *,G EXCLUDE ports we have a
new port group flag - MDB_PG_FLAGS_STAR_EXCL.
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We need to be able to differentiate between pg entries created by
user-space and the kernel when we start generating S,G entries for
IGMPv3/MLDv2's fast path. User-space entries are created by default as
RTPROT_STATIC and the kernel entries are RTPROT_KERNEL. Later we can
allow user-space to provide the entry rt_protocol so we can
differentiate between who added the entries specifically (e.g. clag,
admin, frr etc).
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add new mdb attributes (MDBE_ATTR_SOURCE for setting,
MDBA_MDB_EATTR_SOURCE for dumping) to allow add/del and dump of mdb
entries with a source address (S,G). New S,G entries are created with
filter mode of MCAST_INCLUDE. The same attributes are used for IPv4 and
IPv6, they're validated and parsed based on their protocol.
S,G host joined entries which are added by user are not allowed yet.
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since the MDB add/del code expects an exact struct br_mdb_entry we can't
really add any extensions, thus add a new nested attribute at the level of
MDBA_SET_ENTRY called MDBA_SET_ENTRY_ATTRS which will be used to pass
all new options via netlink attributes. This patch doesn't change
anything functionally since the new attribute is not used yet, only
parsed.
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
compat_sys_mount is identical to the regular sys_mount now, so remove it
and use the native version everywhere.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
|
|
'v5.10/vfio/misc', 'v5.10/vfio/no-cmd-mem' and 'v5.10/vfio/yan_zhao_fixes' into v5.10/vfio/next
|