aboutsummaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)AuthorFilesLines
2024-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-8/+3
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/filter.h kernel/bpf/core.c 66e13b615a0c ("bpf: verifier: prevent userspace memory access") d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT") https://lore.kernel.org/all/[email protected]/ No adjacent changes. Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-01xfrm: Add dir validation to "in" data path lookupAntony Antony1-0/+1
Introduces validation for the x->dir attribute within the XFRM input data lookup path. If the configured direction does not match the expected direction, input, increment the XfrmInStateDirError counter and drop the packet to ensure data integrity and correct flow handling. grep -vw 0 /proc/net/xfrm_stat XfrmInStateDirError 1 Signed-off-by: Antony Antony <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Reviewed-by: Nicolas Dichtel <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2024-05-01xfrm: Add dir validation to "out" data path lookupAntony Antony1-0/+1
Introduces validation for the x->dir attribute within the XFRM output data lookup path. If the configured direction does not match the expected direction, output, increment the XfrmOutStateDirError counter and drop the packet to ensure data integrity and correct flow handling. grep -vw 0 /proc/net/xfrm_stat XfrmOutPolError 1 XfrmOutStateDirError 1 Signed-off-by: Antony Antony <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Reviewed-by: Nicolas Dichtel <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2024-05-01xfrm: Add Direction to the SA in or outAntony Antony1-0/+6
This patch introduces the 'dir' attribute, 'in' or 'out', to the xfrm_state, SA, enhancing usability by delineating the scope of values based on direction. An input SA will restrict values pertinent to input, effectively segregating them from output-related values. And an output SA will restrict attributes for output. This change aims to streamline the configuration process and improve the overall consistency of SA attributes during configuration. This feature sets the groundwork for future patches, including the upcoming IP-TFS patch. Signed-off-by: Antony Antony <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2024-04-30Merge patch series "riscv: Create and document PR_RISCV_SET_ICACHE_FLUSH_CTX ↵Palmer Dabbelt1-0/+6
prctl" Charlie Jenkins <[email protected]> says: Improve the performance of icache flushing by creating a new prctl flag PR_RISCV_SET_ICACHE_FLUSH_CTX. The interface is left generic to allow for future expansions such as with the proposed J extension [1]. Documentation is also provided to explain the use case. Patch sent to add PR_RISCV_SET_ICACHE_FLUSH_CTX to man-pages [2]. [1] https://github.com/riscv/riscv-j-extension [2] https://lore.kernel.org/linux-man/[email protected] * b4-shazam-merge: cpumask: Add assign cpu documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl riscv: Include riscv_set_icache_flush_ctx prctl riscv: Remove unnecessary irqflags processor.h include Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2024-04-30bpf: Add support for kprobe session attachJiri Olsa1-0/+1
Adding support to attach bpf program for entry and return probe of the same function. This is common use case which at the moment requires to create two kprobe multi links. Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs kernel to attach single link program to both entry and exit probe. It's possible to control execution of the bpf program on return probe simply by returning zero or non zero from the entry bpf program execution to execute or not the bpf program on return probe respectively. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-04-30cxl/mbox: Add Clear Log mailbox commandSrinivasulu Thanneeru1-0/+1
Adding UAPI support for CXL r3.1 8.2.9.5.4 Clear Log command. This proposed patch will be useful for clearing and populating the Vendor debug log in certain scenarios, allowing for the aggregation of results over time. Signed-off-by: Srinivasulu Thanneeru <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dave Jiang <[email protected]>
2024-04-30cxl/mbox: Add Get Log Capabilities and Get Supported Logs Sub-List commandsSrinivasulu Thanneeru1-0/+2
Adding UAPI support for 1. CXL r3.1 8.2.9.5.3 Get Log Capabilities. 2. CXL r3.1 8.2.9.5.6 Get Supported Logs Sub-List. Signed-off-by: Srinivasulu Thanneeru <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dave Jiang <[email protected]>
2024-05-01ASoC: doc: dapm: various improvementsMark Brown2-10/+11
Merge series from Luca Ceresoli <[email protected]>: This series applies various improvements to the DAPM documentation: a rewrite of a few sections for clarity, style improvements and typo fixes. Signed-off-by: Luca Ceresoli <[email protected]> --- Changes in v2: - avoid wrapping in patch 3 as suggested by Alex - Link to v1: https://lore.kernel.org/r/[email protected] --- Luca Ceresoli (12): ASoC: doc: dapm: fix typos ASoC: doc: dapm: fix struct name ASoC: doc: dapm: minor rewording ASoC: doc: dapm: remove dash after colon ASoC: doc: dapm: clarify it's an internal API ASoC: doc: dapm: replace "map" with "graph" ASoC: doc: dapm: extend initial descrption ASoC: doc: dapm: describe how widgets and routes are registered ASoC: doc: dapm: fix and improve section "Registering DAPM controls" ASoC: doc: dapm: improve section "Codec/DSP Widget Interconnections" ASoC: doc: dapm: update section "DAPM Widget Events" ASoC: doc: dapm: update event types Documentation/sound/soc/dapm-graph.svg | 375 +++++++++++++++++++++++++++++++++ Documentation/sound/soc/dapm.rst | 174 ++++++++++----- 2 files changed, 492 insertions(+), 57 deletions(-) --- base-commit: c942a0cd3603e34dd2d7237e064d9318cb7f9654 change-id: 20240315-dapm-docs-79bd51f267db Best regards, -- Luca Ceresoli <[email protected]>
2024-04-30drm/amdkfd: Bump kfd version for contiguous VRAM allocationPhilip Yang1-1/+2
Bump the kfd ioctl minor version to delcare the contiguous VRAM allocation flag support. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-04-30drm/amdgpu: Support contiguous VRAM allocationPhilip Yang1-0/+1
RDMA device with limited scatter-gather ability requires contiguous VRAM buffer allocation for RDMA peer direct support. Add a new KFD alloc memory flag and store as bo alloc flag AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS. When pin this bo to export for RDMA peerdirect access, this will set TTM_PL_FLAG_CONTIFUOUS flag, and ask VRAM buddy allocator to get contiguous VRAM. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-04-30netdev: add queue statsXuan Zhuo1-0/+19
These stats are commonly. Support reporting those via netdev-genl queue stats. name: rx-hw-drops name: rx-hw-drop-overruns name: rx-csum-unnecessary name: rx-csum-none name: rx-csum-bad name: rx-hw-gro-packets name: rx-hw-gro-bytes name: rx-hw-gro-wire-packets name: rx-hw-gro-wire-bytes name: rx-hw-drop-ratelimits name: tx-hw-drops name: tx-hw-drop-errors name: tx-csum-none name: tx-needs-csum name: tx-hw-gso-packets name: tx-hw-gso-bytes name: tx-hw-gso-wire-packets name: tx-hw-gso-wire-bytes name: tx-hw-drop-ratelimits Signed-off-by: Xuan Zhuo <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-04-30virtio_net: introduce device stats feature and structuresXuan Zhuo1-0/+143
The virtio-net device stats spec: https://github.com/oasis-tcs/virtio-spec/commit/42f389989823039724f95bbbd243291ab0064f82 We introduce the relative feature and structures. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-04-30RDMA/core: Add an option to display driver-specific QPs in the rdmatoolChiara Meiohas1-0/+6
Utilize the -dd flag (driver-specific details) in the rdmatool to view driver-specific QPs which are not exposed yet. Add the netlink attribute to mark request to convey driver details and use it to return QP subtype as a string. $ rdma resource show qp link ibp8s0f1 link ibp8s0f1/1 lqpn 360 type UD state RTS sq-psn 0 comm [mlx5_ib] link ibp8s0f1/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core] link ibp8s0f1/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core] $ rdma resource show qp link ibp8s0f1 -dd link ibp8s0f1/1 lqpn 360 type UD state RTS sq-psn 0 comm [mlx5_ib] link ibp8s0f1/1 lqpn 465 type DRIVER subtype REG_UMR state RTS sq-psn 0 comm [mlx5_ib] link ibp8s0f1/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core] link ibp8s0f1/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core] $ rdma resource show 0: ibp8s0f0: pd 3 cq 4 qp 3 cm_id 0 mr 0 ctx 0 srq 2 1: ibp8s0f1: pd 3 cq 4 qp 3 cm_id 0 mr 0 ctx 0 srq 2 $ rdma resource show -dd 0: ibp8s0f0: pd 3 cq 4 qp 4 cm_id 0 mr 0 ctx 0 srq 2 1: ibp8s0f1: pd 3 cq 4 qp 4 cm_id 0 mr 0 ctx 0 srq 2 Signed-off-by: Chiara Meiohas <[email protected]> Link: https://lore.kernel.org/r/2607bb3ddec3cae3443c2ea19e9f700825d20a98.1713268997.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]>
2024-04-30Merge tag 'drm-intel-gt-next-2024-04-26' of ↵Dave Airlie1-0/+15
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next UAPI Changes: - drm/i915/guc: Use context hints for GT frequency Allow user to provide a low latency context hint. When set, KMD sends a hint to GuC which results in special handling for this context. SLPC will ramp the GT frequency aggressively every time it switches to this context. The down freq threshold will also be lower so GuC will ramp down the GT freq for this context more slowly. We also disable waitboost for this context as that will interfere with the strategy. We need to enable the use of SLPC Compute strategy during init, but it will apply only to contexts that set this bit during context creation. Userland can check whether this feature is supported using a new param- I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission enabled platforms as they use SLPC for frequency management. The Mesa usage model for this flag is here - https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint - drm/i915/gt: Enable only one CCS for compute workload Enable only one CCS engine by default with all the compute sices allocated to it. While generating the list of UABI engines to be exposed to the user, exclude any additional CCS engines beyond the first instance *** NOTE: This W/A will make all DG2 SKUs appear like single CCS SKUs by default to mitigate a hardware bug. All the EUs will still remain usable, and all the userspace drivers have been confirmed to be able to dynamically detect the change in number of CCS engines and adjust. For the smaller percent of applications that get perf benefit from letting the userspace driver dispatch across all 4 CCS engines we will be introducing a sysfs control as a later patch to choose 4 CCS each with 25% EUs (or 50% if 2 CCS). NOTE: A regression has been reported at https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895 However Andi has been triaging the issue and we're closing in a fix to the gap in the W/A implementation: https://lists.freedesktop.org/archives/intel-gfx/2024-April/348747.html Driver Changes: - Add new and fix to existing workarounds: Wa_14018575942 (MTL), Wa_16019325821 (Gen12.70), Wa_14019159160 (MTL), Wa_16015675438, Wa_14020495402 (Gen12.70) (Tejas, John, Lucas) - Fix UAF on destroy against retire race and remove two earlier partial fixes (Janusz) - Limit the reserved VM space to only the platforms that need it (Andi) - Reset queue_priority_hint on parking for execlist platforms (Chris) - Fix gt reset with GuC submission is disabled (Nirmoy) - Correct capture of EIR register on hang (John) - Remove usage of the deprecated ida_simple_xx() API - Refactor confusing __intel_gt_reset() (Nirmoy) - Fix the fix for GuC reset lock confusion (John) - Simplify/extend platform check for Wa_14018913170 (John) - Replace dev_priv with i915 (Andi) - Add and use gt_to_guc() wrapper (Andi) - Remove bogus null check (Rodrigo, Dan) . Selftest improvements (Janusz, Nirmoy, Daniele) Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-04-29Merge tag 'tee-ts-for-v6.10' of ↵Arnd Bergmann1-0/+1
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers TEE driver for Trusted Services This introduces a TEE driver for Trusted Services [1]. Trusted Services is a TrustedFirmware.org project that provides a framework for developing and deploying device Root of Trust services in FF-A [2] Secure Partitions. The project hosts the reference implementation of Arm Platform Security Architecture [3] for Arm A-profile devices. The FF-A Secure Partitions are accessible through the FF-A driver in Linux. However, the FF-A driver doesn't have a user space interface so user space clients currently cannot access Trusted Services. The goal of this TEE driver is to bridge this gap and make Trusted Services functionality accessible from user space. [1] https://www.trustedfirmware.org/projects/trusted-services/ [2] https://developer.arm.com/documentation/den0077/ [3] https://www.arm.com/architecture/security-features/platform-security * tag 'tee-ts-for-v6.10' of https://git.linaro.org/people/jens.wiklander/linux-tee: MAINTAINERS: tee: tstee: Add entry Documentation: tee: Add TS-TEE driver tee: tstee: Add Trusted Services TEE driver tee: optee: Move pool_op helper functions tee: Refactor TEE subsystem header files Link: https://lore.kernel.org/r/20240425073119.GA3261080@rayden Signed-off-by: Arnd Bergmann <[email protected]>
2024-04-29Merge tag 'for-netdev' of ↵Jakub Kicinski1-5/+32
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-04-29 We've added 147 non-merge commits during the last 32 day(s) which contain a total of 158 files changed, 9400 insertions(+), 2213 deletions(-). The main changes are: 1) Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86 BPF JIT. This allows inlining per-CPU array and hashmap lookups and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko. 2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song. 3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction, from Alexei Starovoitov. 4) Add support for passing mark with bpf_fib_lookup helper, from Anton Protopopov. 5) Add a new bpf_wq API for deferring events and refactor sleepable bpf_timer code to keep common code where possible, from Benjamin Tissoires. 6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs to check when NULL is passed for non-NULLable parameters, from Eduard Zingerman. 7) Harden the BPF verifier's and/or/xor value tracking, from Harishankar Vishwanathan. 8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel crypto subsystem, from Vadim Fedorenko. 9) Various improvements to the BPF instruction set standardization doc, from Dave Thaler. 10) Extend libbpf APIs to partially consume items from the BPF ringbuffer, from Andrea Righi. 11) Bigger batch of BPF selftests refactoring to use common network helpers and to drop duplicate code, from Geliang Tang. 12) Support bpf_tail_call_static() helper for BPF programs with GCC 13, from Jose E. Marchesi. 13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled, from Kumar Kartikeya Dwivedi. 14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs, from David Vernet. 15) Extend the BPF verifier to allow different input maps for a given bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu. 16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan. 17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison the stack memory, from Martin KaFai Lau. 18) Improve xsk selftest coverage with new tests on maximum and minimum hardware ring size configurations, from Tushar Vyavahare. 19) Various ReST man pages fixes as well as documentation and bash completion improvements for bpftool, from Rameez Rehman & Quentin Monnet. 20) Fix libbpf with regards to dumping subsequent char arrays, from Quentin Deslandes. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits) bpf, docs: Clarify PC use in instruction-set.rst bpf_helpers.h: Define bpf_tail_call_static when building with GCC bpf, docs: Add introduction for use in the ISA Internet Draft selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args selftests/bpf: dummy_st_ops should reject 0 for non-nullable params bpf: check bpf_dummy_struct_ops program params for test runs selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops selftests/bpf: adjust dummy_st_ops_success to detect additional error bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable selftests/bpf: Add ring_buffer__consume_n test. bpf: Add bpf_guard_preempt() convenience macro selftests: bpf: crypto: add benchmark for crypto functions selftests: bpf: crypto skcipher algo selftests bpf: crypto: add skcipher to bpf crypto bpf: make common crypto API for TC/XDP programs bpf: update the comment for BTF_FIELDS_MAX selftests/bpf: Fix wq test. selftests/bpf: Use make_sockaddr in test_sock_addr selftests/bpf: Use connect_to_addr in test_sock_addr ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-29Merge v6.9-rc6 into drm-nextDaniel Vetter2-8/+3
Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas has some fun with i915-gem conflicts. Signed-off-by: Daniel Vetter <[email protected]>
2024-04-29media: uapi: v4l: Don't expose generic metadata formats to userspaceLaurent Pinchart1-0/+2
The generic metadata pixel formats (V4L2_META_FMT_GENERIC_*) are meant to be used in conjunction with device-specific media bus codes. Those codes are work in progress and not available in the upstream kernel yet. To make sure the generic metadata pixel formats won't be used by userspace until we have the full infrastructure in place, keep their definition private to the kernel for now. Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: v4l: Add V4L2-PIX-FMT-Y14P formatJean-Michel Hautbois1-0/+1
This is a packed grey-scale image format with a depth of 14 bits per pixel. Every four consecutive samples are packed into seven bytes. Each of the first four bytes contain the eight high order bits of the pixels, and the three following bytes contains the six least significants bits of each pixel, in the same order. As the other formats only needed 5 bytes before, append two bytes in the documentation array. Signed-off-by: Jean-Michel Hautbois <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: v4l: Add V4L2-PIX-FMT-Y12P formatJean-Michel Hautbois1-0/+1
This is a packed grey-scale image format with a depth of 12 bits per pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes contain the 8 high order bits of the pixels, and the 3rd byte contains the 4 least significants bits of each pixel, in the same order. Add the entry in userspace API, and document it. Signed-off-by: Jean-Michel Hautbois <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: v4l: subdev: Add len_routes field to struct v4l2_subdev_routingSakari Ailus1-3/+7
The len_routes field is used to tell the size of the routes array in struct v4l2_subdev_routing. This way the number of routes returned from S_ROUTING IOCTL may be larger than the number of routes provided, in case there are more routes returned by the driver. Note that this uAPI is still disabled in the code, so this change can safely be done. Anyone who manually patched the code to enable this uAPI must update their code. The patch also increases the number of reserved fields in struct v4l2_subdev_routing. Signed-off-by: Sakari Ailus <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: v4l: Set line based metadata flag in V4L2 coreSakari Ailus1-0/+4
Set (and unset) the V4L2_FMT_FLAG_META_LINE_BASED flag in struct v4l2_fmtdesc based on the format after returning the driver callback for enumerating formats. This way the drivers don't need to care about the flag. Signed-off-by: Sakari Ailus <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: v4l: Support line-based metadata captureSakari Ailus1-0/+10
Many camera sensors, among other devices, transmit embedded data and image data for each CSI-2 frame. This embedded data typically contains register configuration of the sensor that has been used to capture the image data of the same frame. The embedded data is received by the CSI-2 receiver and has the same properties as the image data, including that it is line based: it has width, height and bytesperline (stride). Add these fields to struct v4l2_meta_format and document them. Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is line-based i.e. these fields of struct v4l2_meta_format are valid for it. Signed-off-by: Sakari Ailus <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: uapi: v4l: Add generic 8-bit metadata format definitionsSakari Ailus1-0/+8
Generic 8-bit metadata formats define the in-memory data layout but not the format of the data itself. The reasoning for having such formats is to allow CSI-2 receiver drivers to receive and DMA drivers to write the data to memory without knowing a large number of device-specific formats. These formats may be used only in conjunction with a Media Controller pipeline where the internal pad of the source sub-device defines the specific format of the data (using an mbus code). Signed-off-by: Sakari Ailus <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: uapi: Document which mbus format fields are valid for metadataSakari Ailus1-6/+12
Now that metadata mbus formats have been added, it is necessary to define which fields in struct v4l2_mbus_format are applicable to them (not many). Signed-off-by: Sakari Ailus <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: uapi: Add generic serial metadata mbus formatsSakari Ailus1-0/+9
Add generic serial metadata mbus formats. These formats describe data width and packing but not the content itself. The reason for specifying such formats is that the formats as such are fairly device specific but they are still handled by CSI-2 receiver drivers that should not be aware of device specific formats. What makes generic metadata formats possible is that these formats are parsed by software only, after capturing the data to system memory. Also add a definition for "Data Unit" to cover what is essentially a pixel but is not image data. Signed-off-by: Sakari Ailus <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29media: v4l2-subdev: Clearly document that the crop API won't be extendedLaurent Pinchart1-0/+4
The V4L2 subdev crop API has been marked as obsolete, deprecated by the selection API. Despite this, it has recently been extended with streams support. In hindsight this was a mistake. Make sure it doesn't happen again by clearly documenting that no new extensions will be accepted. Suggested-by: Hans Verkuil <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-04-29xfrm: Correct spelling mistake in xfrm.h commentAntony Antony1-1/+1
A spelling error was found in the comment section of include/uapi/linux/xfrm.h. Since this header file is copied to many userspace programs and undergoes Debian spellcheck, it's preferable to fix it in upstream rather than downstream having exceptions. This commit fixes the spelling mistake. Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Antony Antony <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2024-04-26drm/amd: GFX12 changes for converting tiling flags to modifiersAurabindo Pillai1-0/+3
GFX12 swizzle mode and GCC formats changed and is much simpler. Use a seperate function for the same. Changes: * Swizzle mode is now 3 bits only * DCC enablement doesn't come from tiling_flags, it is always set in modifiers * DCC max compressed block size of 128B Signed-off-by: Aurabindo Pillai <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-04-26drm/amd: define new gfx12 uapi flagsAurabindo Pillai1-1/+13
define new gfx12 uapi flags Signed-off-by: Marek Olšák <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-04-26drm/amd: Add gfx12 swizzle mode defsAurabindo Pillai1-0/+16
Add GFX12 swizzle mode definitions for use with DCN401 Signed-off-by: Aurabindo Pillai <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-04-26Merge tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds1-5/+0
Pull drm fixes from Dave Airlie: "Regular weekly merge request, mostly amdgpu and misc bits in xe/etnaviv/gma500 and some core changes. Nothing too outlandish, seems to be about normal for this time of release. atomic-helpers: - Fix memory leak in drm_format_conv_state_copy() fbdev: - fbdefio: Fix address calculation amdgpu: - Suspend/resume fix - Don't expose gpu_od directory if it's empty - SDMA 4.4.2 fix - VPE fix - BO eviction fix - UMSCH fix - SMU 13.0.6 reset fixes - GPUVM flush accounting fix - SDMA 5.2 fix - Fix possible UAF in mes code amdkfd: - Eviction fence handling fix - Fix memory leak when GPU memory allocation fails - Fix dma-buf validation - Fix rescheduling of restore worker - SVM fix gma500: - Fix crash during boot etnaviv: - fix GC7000 TX clock gating - revert NPU UAPI changes xe: - Fix error paths on managed allocations - Fix PF/VF relay messages" * tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernel: (23 commits) Revert "drm/etnaviv: Expose a few more chipspecs to userspace" drm/etnaviv: fix tx clock gating on some GC7000 variants drm/xe/guc: Fix arguments passed to relay G2H handlers drm/xe: call free_gsc_pkt only once on action add failure drm/xe: Remove sysfs only once on action add failure fbdev: fix incorrect address computation in deferred IO drm/amdgpu/mes: fix use-after-free issue drm/amdgpu/sdma5.2: use legacy HDP flush for SDMA2/3 drm/amdgpu: Fix the ring buffer size for queue VM flush drm/amdkfd: Add VRAM accounting for SVM migration drm/amd/pm: Restore config space after reset drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspend drm/amdkfd: Fix rescheduling of restore worker drm/amdgpu: Update BO eviction priorities drm/amdgpu/vpe: fix vpe dpm setup failed drm/amdgpu: Assign correct bits for SDMA HDP flush drm/amdgpu/pm: Remove gpu_od if it's an empty directory drm/amdkfd: make sure VM is ready for updating operations drm/amdgpu: Fix leak when GPU memory allocation fails drm/amdkfd: Fix eviction fence handling ...
2024-04-26net: hsr: Provide RedBox support (HSR-SAN)Lukasz Majewski1-0/+1
Introduce RedBox support (HSR-SAN to be more precise) for HSR networks. Following traffic reduction optimizations have been implemented: - Do not send HSR supervisory frames to Port C (interlink) - Do not forward to HSR ring frames addressed to Port C - Do not forward to Port C frames from HSR ring - Do not send duplicate HSR frame to HSR ring when destination is Port C The corresponding patch to modify iptable2 sources has already been sent: https://lore.kernel.org/netdev/[email protected]/T/ Testing procedure (veth and netns): ----------------------------------- One shall run: linux-vanila/tools/testing/selftests/net/hsr/hsr_redbox.sh (Detailed description of the setup one can find in the test script file). Testing procedure (real hardware): ---------------------------------- The EVB-KSZ9477 has been used for testing on net-next branch (SHA1: 5fc68320c1fb3c7d456ddcae0b4757326a043e6f). Ports 4/5 were used for SW managed HSR (hsr1) as first hsr0 for ports 1/2 (with HW offloading for ksz9477) was created. Port 3 has been used as interlink port (single USB-ETH dongle). Configuration - RedBox (EVB-KSZ9477): if link set lan1 down;ip link set lan2 down ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1 ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 interlink lan3 supervision 45 version 1 ip link set lan4 up;ip link set lan5 up ip link set lan3 up ip addr add 192.168.0.11/24 dev hsr1 ip link set hsr1 up Configuration - DAN-H (EVB-KSZ9477): ip link set lan1 down;ip link set lan2 down ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1 ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 supervision 45 version 1 ip link set lan4 up;ip link set lan5 up ip addr add 192.168.0.12/24 dev hsr1 ip link set hsr1 up This approach uses only SW based HSR devices (hsr1). -------------- ----------------- ------------ DAN-H Port5 | <------> | Port5 | | Port4 | <------> | Port4 Port3 | <---> | PC | | (RedBox) | | (USB-ETH) EVB-KSZ9477 | | EVB-KSZ9477 | | -------------- ----------------- ------------ Signed-off-by: Lukasz Majewski <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-04-26Merge tag 'drm-etnaviv-fixes-2024-04-25' of ↵Dave Airlie1-5/+0
https://git.pengutronix.de/git/lst/linux into drm-fixes - fix GC7000 TX clock gating - revert NPU UAPI changes Signed-off-by: Dave Airlie <[email protected]> From: Lucas Stach <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-04-25bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB argsPhilo Lu1-0/+2
Two important arguments in RTT estimation, mrtt and srtt, are passed to tcp_bpf_rtt(), so that bpf programs get more information about RTT computation in BPF_SOCK_OPS_RTT_CB. The difference between bpf_sock_ops->srtt_us and the srtt here is: the former is an old rtt before update, while srtt passed by tcp_bpf_rtt() is that after update. Signed-off-by: Philo Lu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2024-04-25powerpc/papr_scm: Move duplicate definitions to common header filesShivaprasad G Bhat1-0/+165
papr_scm and ndtest share common PDSM payload structs like nd_papr_pdsm_health. Presently these structs are duplicated across papr_pdsm.h and ndtest.h header files. Since 'ndtest' is essentially arch independent and can run on platforms other than PPC64, a way needs to be deviced to avoid redundancy and duplication of PDSM structs in future. So the patch proposes moving the PDSM header from arch/powerpc/include- -/uapi/ to the generic include/uapi/linux directory. Also, there are some #defines common between papr_scm and ndtest which are not exported to the user space. So, move them to a header file which can be shared across ndtest and papr_scm via newly introduced include/linux/papr_scm.h. Signed-off-by: Shivaprasad G Bhat <[email protected]> Signed-off-by: Vaibhav Jain <[email protected]> Suggested-by: Aneesh Kumar K.V <[email protected]> Link: https://lore.kernel.org/r/170638176942.112443.2937254675538057083.stgit@ltcd48-lp2.aus.stglab.ibm.com Signed-off-by: Ira Weiny <[email protected]>
2024-04-25Revert "drm/etnaviv: Expose a few more chipspecs to userspace"Christian Gmeiner1-5/+0
This reverts commit 1dccdba084897443d116508a8ed71e0ac8a031a4. In userspace a different approach was choosen - hwdb. As a result, there is no need for these values. Signed-off-by: Christian Gmeiner <[email protected]> Reviewed-by: Tomeu Vizoso <[email protected]> Signed-off-by: Lucas Stach <[email protected]>
2024-04-24scsi: mpi3mr: Fix some kernel-doc warnings in scsi_bsg_mpi3mr.hRandy Dunlap1-3/+5
Correct the name of a struct in kernel-doc to match the actual function name. Add kernel-doc comments for 2 reserved fields to match comments for other reserved fields. Correct the kernel-doc comments for a nested struct to eliminate kernel-doc warnings for them. Warnings fixed here are: scsi_bsg_mpi3mr.h:419: warning: expecting prototype for struct mpi3mr_bsg_buf_entry_list. Prototype was for struct mpi3mr_buf_entry_list instead scsi_bsg_mpi3mr.h:435: warning: Function parameter or struct member 'rsvd2' not described in 'mpi3mr_bsg_mptcmd' scsi_bsg_mpi3mr.h:456: warning: Function parameter or struct member 'rsvd3' not described in 'mpi3mr_bsg_packet' scsi_bsg_mpi3mr.h:456: warning: Excess struct member 'drvrcmd' description in 'mpi3mr_bsg_packet' scsi_bsg_mpi3mr.h:456: warning: Excess struct member 'mptcmd' description in 'mpi3mr_bsg_packet' Signed-off-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: James E.J. Bottomley <[email protected]> Cc: Martin K. Petersen <[email protected]> Cc: Sathya Prakash Veerichetty <[email protected]> Cc: Kashyap Desai <[email protected]> Cc: Sumit Saxena <[email protected]> Cc: Sreekanth Reddy <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-04-24scsi: ufs: bsg: Fix all kernel-doc warningsRandy Dunlap1-1/+3
In struct utp_upiu_query_v4_0, add description for @osf3 and mark the @reserved field as private so that no description is needed for it. In struct utp_upiu_cmd, use the correct struct member name to eliminate a kernel-doc warning. Signed-off-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: James E.J. Bottomley <[email protected]> Cc: Martin K. Petersen <[email protected]> Cc: Alim Akhtar <[email protected]> Cc: Avri Altman <[email protected]> Cc: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2024-04-23bpf: add support for bpf_wq user typeBenjamin Tissoires1-0/+4
Mostly a copy/paste from the bpf_timer API, without the initialization and free, as they will be done in a separate patch. Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-04-24Merge tag 'drm-xe-next-2024-04-23' of ↵Dave Airlie1-4/+21
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Remove unused flags (Francois Dugast) - Extend uAPI to query HuC micro-controler firmware version (Francois Dugast) - drm/xe/uapi: Define topology types as indexes rather than masks (Francois Dugast) - drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE (Francois Dugast) - devcoredump updates. Some touching the output format. (José Roberto de Souza, Matthew Brost) - drm/xe/hwmon: Add infra to support card power and energy attributes - Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst) - drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper) - Invalidate userptr VMA on page pin fault (Matthew Brost) - Improve xe_bo_move tracepoint (Priyanka Danamudi) - Align fence output format in ftrace log Cross-driver Changes: - drm/i915/hwmon: Get rid of devm (Ashutosh Dixit) (Acked-by: Rodrigo Vivi <[email protected]>) - drm/i915/display: convert inner wakeref get towards get_if_in_use (SOB Rodrigo Vivi) - drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref (Committer, SOB Jani Nikula) Driver Changes: - Fix for unneeded CCS metadata allocation (Akshata Jahagirdar) - Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda) - A couple of build fixes (Arnd Bergmann) - Fix register definition (Ashutosh Dixit) - Add BMG mocs table (Balasubramani Vivekanandan) - Replace sprintf() across driver (Bommu Krishnaiah) - Add an xe2 workaround (Bommu Krishnaiah) - Makefile fix (Dafna Hirschfeld) - force_wake_get error value check (Daniele Ceraolo Spurio) - Handle GSCCS ER interrupt (Daniele Ceraolo Spurio) - GSC Workaround (Daniele Ceraolo Spurio) - Build error fix (Dawei Li) - drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast) - Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala, Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada, Vinay Belgaumkar, Badal Nilawar) - xe2hpg compression (Himal Ghimiray Prasad) - Error code cleanups and fixes (Himal Prasad Ghimiray) - struct xe_device cleanup (Jani Nikula) - Avoid validating bos when only requesting an exec dma-fence (José Roberto de Souza) - Remove debug message from migrate_clear (José Roberto de Souza) - Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza) - Mark dpt and related vma as uncached (Juha-Pekka Heikkila) - Hwmon updates (Karthik Poosa) - KConfig fix when ACPI_WMI selcted (Lu Yao) - Update intel_uncore_read*() return types (Luca Coelho) - Mocs updates (Lucas De Marchi, Matt Roper) - Drop dynamic load-balancing workaround (Lucas De Marchi) - Fix a PVC workaround (Lucas De Marchi) - Group live kunit tests into a single module (Lucas De Marchi) - Various code cleanups (Lucas De Marchi) - Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock (Maarten Lankhorst) - Fix a bo leak (Marten Lankhorst) - Add LRC parsing for more GPU instructions (Matt Roper) - Add various definitions for hardware and IP (Matt Roper) - Define all possible engines in media IP descriptors (Matt Roper) - Various cleanups, asserts and code fixes (Matthew Auld) - Various cleanups and code fixes (Matthew Brost) - Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni) - Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost) - Handle timing out of already signaled jobs gracefully (Matthew Brost) - Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost) - Do not grab forcewakes when issuing GGTT TLB invalidation via GuC (Matthew Brost) - Drop ggtt invalidate from display code (Matthew Brost) - drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost) - Add debug messages for MMU notifier and VMA invalidate (Matthew Brost) - Use ordered wq for preempt fence waiting (Matthew Brost) - Initial development for SR-IOV support including some refactoring (Michal Wajdeczko) - Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko) - Move userptr over to start using hmm_range_fault (Oak Zeng) - Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli) - Pcode - and VRAM initialization check update (Riana Tauro) - Large PM update including i915 display patches, and a fix for one of those. (Rodrigo Vivi) - Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan) - GSC / HDCP updates (Suraj Kandpal) - Minor code cleanup (Tejas Upadhyay) - Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop (Thomas Hellström) - Backmerge (Thomas Hellström) - GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong) Signed-off-by: Dave Airlie <[email protected]> # -----BEGIN PGP SIGNATURE----- # # iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG # v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0 # vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM= # =HouD # -----END PGP SIGNATURE----- # gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST # gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF # gpg: Can't check signature: No public key # Conflicts: # drivers/gpu/drm/xe/xe_device_types.h # drivers/gpu/drm/xe/xe_vm.c # drivers/gpu/drm/xe/xe_vm_types.h From: Thomas Hellstrom <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
2024-04-23Merge 6.9-rc5 into tty-nextGreg Kroah-Hartman1-7/+8
We want the tty fixes in here as well, and it resolves a merge conflict in: drivers/tty/serial/serial_core.c as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-04-23Merge 6.9-rc5 into char-misc-nextGreg Kroah-Hartman1-7/+8
We need the char/misc fixes in here as well to work off of. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-04-23crash: add a new kexec flag for hotplug supportSourabh Jain1-0/+1
Commit a72bbec70da2 ("crash: hotplug support for kexec_load()") introduced a new kexec flag, `KEXEC_UPDATE_ELFCOREHDR`. Kexec tool uses this flag to indicate to the kernel that it is safe to modify the elfcorehdr of the kdump image loaded using the kexec_load system call. However, it is possible that architectures may need to update kexec segments other then elfcorehdr. For example, FDT (Flatten Device Tree) on PowerPC. Introducing a new kexec flag for every new kexec segment may not be a good solution. Hence, a generic kexec flag bit, `KEXEC_CRASH_HOTPLUG_SUPPORT`, is introduced to share the CPU/Memory hotplug support intent between the kexec tool and the kernel for the kexec_load system call. Now we have two kexec flags that enables crash hotplug support for kexec_load system call. First is KEXEC_UPDATE_ELFCOREHDR (only used in x86), and second is KEXEC_CRASH_HOTPLUG_SUPPORT (for all architectures). To simplify the process of finding and reporting the crash hotplug support the following changes are introduced. 1. Define arch specific function to process the kexec flags and determine crash hotplug support 2. Rename the @update_elfcorehdr member of struct kimage to @hotplug_support and populate it for both kexec_load and kexec_file_load syscalls, because architecture can update more than one kexec segment 3. Let generic function crash_check_hotplug_support report hotplug support for loaded kdump image based on value of @hotplug_support To bring the x86 crash hotplug support in line with the above points, the following changes have been made: - Introduce the arch_crash_hotplug_support function to process kexec flags and determine crash hotplug support - Remove the arch_crash_hotplug_[cpu|memory]_support functions Signed-off-by: Sourabh Jain <[email protected]> Acked-by: Baoquan He <[email protected]> Acked-by: Hari Bathini <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2024-04-22vDPA: code clean for vhost_vdpa uapiZhu Lingshan1-3/+3
This commit cleans up the uapi for vhost_vdpa by better naming some of the enums which report blk information to user space, and they are not in any official releases yet. Fixes: 1ac61ddfee93 ("vDPA: report virtio-blk flush info to user space") Fixes: ae1374b7f72c ("vDPA: report virtio-block read-only info to user space") Fixes: 330b8aea6924 ("vDPA: report virtio-block max segment size to user space") Signed-off-by: Zhu Lingshan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2024-04-22io_uring/net: support bundles for recvJens Axboe1-7/+8
If IORING_OP_RECV is used with provided buffers, the caller may also set IORING_RECVSEND_BUNDLE to turn it into a multi-buffer recv. This grabs buffers available and receives into them, posting a single completion for all of it. This can be used with multishot receive as well, or without it. Now that both send and receive support bundles, add a feature flag for it as well. If IORING_FEAT_RECVSEND_BUNDLE is set after registering the ring, then the kernel supports bundles for recv and send. Signed-off-by: Jens Axboe <[email protected]>
2024-04-22io_uring/net: support bundles for sendJens Axboe1-0/+9
If IORING_OP_SEND is used with provided buffers, the caller may also set IORING_RECVSEND_BUNDLE to turn it into a multi-buffer send. The idea is that an application can fill outgoing buffers in a provided buffer group, and then arm a single send that will service them all. Once there are no more buffers to send, or if the requested length has been sent, the request posts a single completion for all the buffers. This only enables it for IORING_OP_SEND, IORING_OP_SENDMSG is coming in a separate patch. However, this patch does do a lot of the prep work that makes wiring up the sendmsg variant pretty trivial. They share the prep side. Signed-off-by: Jens Axboe <[email protected]>
2024-04-22Backmerge tag 'v6.9-rc5' into drm-nextDave Airlie1-7/+8
Linux 6.9-rc5 I've had a persistent msm failure on clang, and the fix is in fixes so just pull it back to fix that. Signed-off-by: Dave Airlie <[email protected]>
2024-04-22Merge tag 'drm-misc-next-2024-04-19' of ↵Dave Airlie1-0/+11
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.10-rc1: UAPI Changes: - Add SIZE_HINTS property for cursor planes. Cross-subsystem Changes: Core Changes: - Document the requirements and expectations of adding new driver-specific properties. - Assorted small fixes to ttm. - More Kconfig fixes. - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - Fixes for drm-panic, and option to test it. - Assorted small fixes and updates to edid. - Add drm_crtc_vblank_crtc and use it in vkms, nouveau. Driver Changes: - Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi. - Add drm panic to simpledrm, mgag200, imx, ast. - Use dev_err_probe in bridge/panel drivers. - Add Innolux G121X1-L03, LG sw43408 panels. - Use struct drm_edid in i915 bios parsing. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.