aboutsummaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)AuthorFilesLines
2022-04-20net/sched: flower: Add number of vlan tags filterBoris Sukholitko1-0/+2
These are bookkeeping parts of the new num_of_vlans filter. Defines, dump, load and set are being done here. Signed-off-by: Boris Sukholitko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-19spi: add SPI_RX_CPHA_FLIP mode bitBaruch Siach1-1/+2
Some SPI devices latch MOSI bits on one clock phase, but produce valid MISO bits on the other phase. Add SPI_RX_CPHA_FLIP mode to instruct the controller driver to flip CPHA for Rx (MISO) only transfers. Signed-off-by: Baruch Siach <[email protected]> Link: https://lore.kernel.org/r/a715ca92713ca02071f33dcca9960a66a03c949a.1649702729.git.baruch@tkos.co.il Signed-off-by: Mark Brown <[email protected]>
2022-04-19ASoC: Intel: avs: Declare vendor tokensCezary Rojewski1-0/+126
Expose all vendor tokens that help shape AVS topology. Parsing helpers introduced in follow up patches make use of these to know which block they are currently dealing with and to verify their correctness. Signed-off-by: Amadeusz Sławiński <[email protected]> Signed-off-by: Cezary Rojewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-19net: sched: support hash selecting tx queueTonghao Zhang1-0/+2
This patch allows users to pick queue_mapping, range from A to B. Then we can load balance packets from A to B tx queue. The range is an unsigned 16bit value in decimal format. $ tc filter ... action skbedit queue_mapping skbhash A B "skbedit queue_mapping QUEUE_MAPPING" (from "man 8 tc-skbedit") is enhanced with flags: SKBEDIT_F_TXQ_SKBHASH +----+ +----+ +----+ | P1 | | P2 | | Pn | +----+ +----+ +----+ | | | +-----------+-----------+ | | clsact/skbedit | MQ v +-----------+-----------+ | q0 | qn | qm v v v HTB/FQ FIFO ... FIFO For example: If P1 sends out packets to different Pods on other host, and we want distribute flows from qn - qm. Then we can use skb->hash as hash. setup commands: $ NETDEV=eth0 $ ip netns add n1 $ ip link add ipv1 link $NETDEV type ipvlan mode l2 $ ip link set ipv1 netns n1 $ ip netns exec n1 ifconfig ipv1 2.2.2.100/24 up $ tc qdisc add dev $NETDEV clsact $ tc filter add dev $NETDEV egress protocol ip prio 1 \ flower skip_hw src_ip 2.2.2.100 action skbedit queue_mapping skbhash 2 6 $ tc qdisc add dev $NETDEV handle 1: root mq $ tc qdisc add dev $NETDEV parent 1:1 handle 2: htb $ tc class add dev $NETDEV parent 2: classid 2:1 htb rate 100kbit $ tc class add dev $NETDEV parent 2: classid 2:2 htb rate 200kbit $ tc qdisc add dev $NETDEV parent 1:2 tbf rate 100mbit burst 100mb latency 1 $ tc qdisc add dev $NETDEV parent 1:3 pfifo $ tc qdisc add dev $NETDEV parent 1:4 pfifo $ tc qdisc add dev $NETDEV parent 1:5 pfifo $ tc qdisc add dev $NETDEV parent 1:6 pfifo $ tc qdisc add dev $NETDEV parent 1:7 pfifo $ ip netns exec n1 iperf3 -c 2.2.2.1 -i 1 -t 10 -P 10 pick txqueue from 2 - 6: $ ethtool -S $NETDEV | grep -i tx_queue_[0-9]_bytes tx_queue_0_bytes: 42 tx_queue_1_bytes: 0 tx_queue_2_bytes: 11442586444 tx_queue_3_bytes: 7383615334 tx_queue_4_bytes: 3981365579 tx_queue_5_bytes: 3983235051 tx_queue_6_bytes: 6706236461 tx_queue_7_bytes: 42 tx_queue_8_bytes: 0 tx_queue_9_bytes: 0 txqueues 2 - 6 are mapped to classid 1:3 - 1:7 $ tc -s class show dev $NETDEV ... class mq 1:3 root leaf 8002: Sent 11949133672 bytes 7929798 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:4 root leaf 8003: Sent 7710449050 bytes 5117279 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:5 root leaf 8004: Sent 4157648675 bytes 2758990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:6 root leaf 8005: Sent 4159632195 bytes 2759990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:7 root leaf 8006: Sent 7003169603 bytes 4646912 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... Cc: Jamal Hadi Salim <[email protected]> Cc: Cong Wang <[email protected]> Cc: Jiri Pirko <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Jonathan Lemon <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Alexander Lobakin <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Talal Ahmad <[email protected]> Cc: Kevin Hao <[email protected]> Cc: Ilias Apalodimas <[email protected]> Cc: Kees Cook <[email protected]> Cc: Kumar Kartikeya Dwivedi <[email protected]> Cc: Antoine Tenart <[email protected]> Cc: Wei Wang <[email protected]> Cc: Arnd Bergmann <[email protected]> Signed-off-by: Tonghao Zhang <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-04-18devlink: implement line card active stateJiri Pirko1-0/+1
Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-18devlink: implement line card provisioningJiri Pirko1-0/+15
In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-18devlink: add support to create line card and expose to userJiri Pirko1-0/+7
Extend the devlink API so the driver is going to be able to create and destroy linecard instances. There can be multiple line cards per devlink device. Expose this new type of object over devlink netlink API to the userspace, with notifications. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-17Input: add Marine Navigation KeycodesShelby Heffron1-0/+21
Add keycodes that are used by marine navigation devices. Signed-off-by: Shelby Heffron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2022-04-17net/ipv6: Introduce accept_unsolicited_na knob to implement router-side ↵Arun Ajith S1-0/+1
changes for RFC9131 Add a new neighbour cache entry in STALE state for routers on receiving an unsolicited (gratuitous) neighbour advertisement with target link-layer-address option specified. This is similar to the arp_accept configuration for IPv4. A new sysctl endpoint is created to turn on this behaviour: /proc/sys/net/ipv6/conf/interface/accept_unsolicited_na. Signed-off-by: Arun Ajith S <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-15net: ethtool: extend ringparam set/get APIs for tx_pushJie Wang1-0/+1
Currently tx push is a standard driver feature which controls use of a fast path descriptor push. So this patch extends the ringparam APIs and data structures to support set/get tx push by ethtool -G/g. Signed-off-by: Jie Wang <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-15Merge tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull io_uring fixes from Jens Axboe: - Ensure we check and -EINVAL any use of reserved or struct padding. Although we generally always do that, it's missed in two spots for resource updates, one for the ring fd registration from this merge window, and one for the extended arg. Make sure we have all of them handled. (Dylan) - A few fixes for the deferred file assignment (me, Pavel) - Add a feature flag for the deferred file assignment so apps can tell we handle it correctly (me) - Fix a small perf regression with the current file position fix in this merge window (me) * tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-block: io_uring: abort file assignment prior to assigning creds io_uring: fix poll error reporting io_uring: fix poll file assign deadlock io_uring: use right issue_flags for splice/tee io_uring: verify pad field is 0 in io_get_ext_arg io_uring: verify resv is 0 in ringfd register/unregister io_uring: verify that resv2 is 0 in io_uring_rsrc_update2 io_uring: move io_uring_rsrc_update2 validation io_uring: fix assign file locking issue io_uring: stop using io_wq_work as an fd placeholder io_uring: move apoll->events cache io_uring: io_kiocb_update_pos() should not touch file for non -1 offset io_uring: flag the fact that linked file assignment is sane
2022-04-15drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICESMatt Atwood1-4/+23
Newer platforms have DSS that aren't necessarily available for both geometry and compute, two queries will need to exist. This introduces the first, when passing a valid engine class and engine instance in the flags returns a topology describing geometry. Based on past discussion, we currently only support this new query item on Xe_HP and beyond; earlier platforms do not need to worry about geometry and compute pipelines having access to different topology and should continue to use the existing topology query. v2: fix white space errors v3: change flags from hosting 2 8 bit numbers to holding a i915_engine_class_instance struct v4: add error if non rcs engine passed. v5 (by MattR): - Improve kerneldoc and cross references to related structs/enums. (Daniel) - Clarify that geometry query is only supported on render engines (Francisco) - Clarify that the new query is only supported on Xe_HP+. - Fix checkpatch warnings. Cc: Ashutosh Dixit <[email protected]> Cc: Matt Roper <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Francisco Jerez <[email protected]> UMD (mesa): https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14143 Testcase: igt@i915_query@test-query-geometry-subslices Signed-off-by: Matt Atwood <[email protected]> Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Francisco Jerez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-15drm/i915/doc: Link query items to their uapi structsMatt Roper1-14/+20
Document the possible options for drm_i915_query_item.query_id with links to the corresponding uapi structures. Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Francisco Jerez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-15drm/i915/doc: Convert perf UAPI comments to kerneldocMatt Roper1-30/+86
Convert the comments for drm_i915_query_perf_config and drm_i915_perf_oa_config to kerneldoc so that they will show up in the generated documentation. Also correct a couple places that referred to query_id when they actually meant to refer to query_item.flags. Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Francisco Jerez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-15drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldocMatt Roper1-32/+78
This structure has a great comment describing the fields, but it's not currently in kerneldoc form and does not show up in the generated documentation. Let's fix that and also clarify the description of what "subslice" refers to on gen12 platforms and beyond and that "slice" is no longer meaningful on Xe_HP and beyond. Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Francisco Jerez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-0/+4
2022-04-14Merge tag 'drm-intel-next-2022-04-13-1' of ↵Dave Airlie1-0/+47
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull for v5.19: Features and functionality: - Add support for new Tile 4 format on DG2 (Stan) - Add support for new CCS clear color compression on DG2 (Mika, Juha-Pekka) - Add support for new render and media compression formats on DG2 (Matt) - Support multiple eDP and LVDS native mode refresh rates (Ville) - Support static DRRS (Ville) - ATS-M platform info (Matt) - RPL-S PCI IDs (Tejas) - Extend DP HDR support to HSW+ (Uma) - Bump ADL-P DMC version to v2.16 (Madhumitha) - Let users disable PSR2 while enabling PSR1 (José) Refactoring and cleanups: - Massive DRRS and panel fixed mode refactoring and cleanups (Ville) - Power well refactoring and cleanup (Imre) - Clean up and refactor crtc readout and compute config (Ville) - Use kernel string helpers (Lucas) - Refactor gmbus pin lookups and allocation (Jani) - PCH display cleanups (Ville) - DPLL and DPLL manager refactoring (Ville) - Include and header refactoring (Jani, Tvrtko) - DMC abstractions (Jani) - Non-x86 build refactoring (Casey) - VBT parsing refactoring (Ville) - Bigjoiner refactoring (Ville) - Optimize plane, pfit, scaler, etc. programming using unlocked writes (Ville) - Split several register writes in commit to noarm+arm pairs (Ville) - Clean up SAGV handling (Ville) - Clean up bandwidth and ddb allocation (Ville) - FBC cleanups (Ville) Fixes: - Fix native HDMI and DP HDMI DFP clock limits on deep color/4:2:0 (Ville) - Fix DMC firmware platform check (Lucas) - Fix cursor coordinates on bigjoiner secondary (Ville) - Fix MSO vs. bigjoiner timing confusion (Ville) - Fix ADL-P eDP voltage swing (José) - Fix VRR capability property update (Manasi) - Log DG2 SNPS PHY calibration errors (Matt, Lucas) - Fix PCODE request status checks (Stan) - Fix uncore unclaimed access warnings (Lucas) - Fix VBT new max TMDS clock parsing (Shawn) - Fix ADL-P non-existent underrun recovery (Swathi Dhanavanthri) - Fix ADL-N stepping info (Tejas) - Fix DPT mapping flags to contiguous (Stan) - Fix DG2 max display bandwidth (Vinod) - Fix DP low voltage SKU checks (Ankit) - Fix RPL-S VT-d translation enable via quirk (Tejas) - Fixes to PSR2 (José) - Fix PIPE_MBUS_DBOX_CTL programming (José) - Fix LTTPR capability read/check on DP 1.2 (Imre) - Fix ADL-P register corruption after DDI clock enabling (Imre) - Fix ADL-P MBUS DBOX BW and B credits (Caz) Merges: - Backmerge drm-next (Rodrigo, Jani) Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-13KVM, SEV: Add KVM_EXIT_SHUTDOWN metadata for SEV-ESPeter Gonda1-1/+4
If an SEV-ES guest requests termination, exit to userspace with KVM_EXIT_SYSTEM_EVENT and a dedicated SEV_TERM type instead of -EINVAL so that userspace can take appropriate action. See AMD's GHCB spec section '4.1.13 Termination Request' for more details. Suggested-by: Sean Christopherson <[email protected]> Suggested-by: Paolo Bonzini <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Peter Gonda <[email protected]> Reported-by: kernel test robot <[email protected]> Message-Id: <[email protected]> [Add documentatino. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-13Merge branch 'kvm-older-features' into HEADPaolo Bonzini1-1/+47
Merge branch for features that did not make it into 5.18: * New ioctls to get/set TSC frequency for a whole VM * Allow userspace to opt out of hypercall patching Nested virtualization improvements for AMD: * Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE, nested vGIF) * Allow AVIC to co-exist with a nested guest running * Fixes for LBR virtualizations when a nested guest is running, and nested LBR virtualization support * PAUSE filtering for nested hypervisors Guest support: * Decoupling of vcpu_is_preempted from PV spinlocks Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-13net: rtnetlink: add ndm flags and state mask attributesNikolay Aleksandrov1-0/+2
Add ndm flags/state masks which will be used for bulk delete filtering. All of these are used by the bridge and vxlan drivers. Also minimal attr policy validation is added, it is up to ndo_fdb_del_bulk implementers to further validate them. Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13net: netlink: add NLM_F_BULK delete request modifierNikolay Aleksandrov1-0/+1
Add a new delete request modifier called NLM_F_BULK which, when supported, would cause the request to delete multiple objects. The flag is a convenient way to signal that a multiple delete operation is requested which can be gradually added to different delete requests. In order to make sure older kernels will error out if the operation is not supported instead of doing something unintended we have to break a required condition when implementing support for this flag, f.e. for neighbors we will omit the mandatory mac address attribute. Initially it will be used to add flush with filtering support for bridge fdbs, but it also opens the door to add similar support to others. Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-12Merge tag 'hardening-v5.18-rc3' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - latent_entropy: Use /dev/urandom instead of small GCC seed (Jason Donenfeld) - uapi/stddef.h: add missed include guards (Tadeusz Struk) * tag 'hardening-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: use /dev/urandom uapi/linux/stddef.h: Add include guards
2022-04-12drm/fourcc: Introduce format modifier for DG2 clear colorMika Kahola1-0/+14
DG2 clear color render compression uses Tile4 layout. Therefore, we need to define a new format modifier for uAPI to support clear color rendering. v2: Display version is fixed. [Imre] KDoc is enhanced for cc modifier. [Nanley & Lionel] v3: Split out the modifier addition to a separate patch. Clarify the modifier layout description. Cc: [email protected] Signed-off-by: Mika Kahola <[email protected]> cc: Anshuman Gupta <[email protected]> Signed-off-by: Juha-Pekka Heikkilä <[email protected]> Signed-off-by: Ramalingam C <[email protected]> Signed-off-by: Imre Deak <[email protected]> Acked-by: Nanley Chery <[email protected]> Reviewed-by: Juha-Pekka Heikkila <[email protected]> Acked-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-12drm/fourcc: Introduce format modifiers for DG2 render and media compressionMatt Roper1-0/+22
The render/media engines on DG2 unify render compression and media compression into a single format for the first time, using the Tile 4 layout for main surfaces. The compression algorithm is different from any previous platform and the display engine must still be configured to decompress either a render or media compressed surface; as such, we need new RC and MC framebuffer modifiers to represent buffers in this format. v2: Clarify modifier layout description. Cc: [email protected] Signed-off-by: Matt Roper <[email protected]> Signed-off-by: Imre Deak <[email protected]> Acked-by: Nanley Chery <[email protected]> Reviewed-by: Juha-Pekka Heikkila <[email protected]> Acked-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-12Merge drm/drm-next into drm-intel-gt-nextJoonas Lahtinen74-554/+1319
Pull in TTM changes needed for DG2 CCS enabling from Ram. Signed-off-by: Joonas Lahtinen <[email protected]>
2022-04-11dmaengine: idxd: update IAA definitions for user headerDave Jiang1-3/+28
Add additional structure definitions for Intel In-memory Analytics Accelerator (IAA/IAX). See specification (1) for more details. 1: https://cdrdv2.intel.com/v1/dl/getContent/721858 Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/164704100212.1373038.18362680016033557757.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2022-04-11Merge drm/drm-next into drm-intel-nextJani Nikula74-558/+1350
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb ("drm/i915/xehpsdv: Add has_flat_ccs to device info"). Signed-off-by: Jani Nikula <[email protected]>
2022-04-10io_uring: flag the fact that linked file assignment is saneJens Axboe1-0/+1
Give applications a way to tell if the kernel supports sane linked files, as in files being assigned at the right time to be able to reliably do <open file direct into slot X><read file from slot X> while using IOSQE_IO_LINK to order them. Not really a bug fix, but flag it as such so that it gets pulled in with backports of the deferred file assignment. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Jens Axboe <[email protected]>
2022-04-08Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-2/+2
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-04-09 We've added 63 non-merge commits during the last 9 day(s) which contain a total of 68 files changed, 4852 insertions(+), 619 deletions(-). The main changes are: 1) Add libbpf support for USDT (User Statically-Defined Tracing) probes. USDTs are an abstraction built on top of uprobes, critical for tracing and BPF, and widely used in production applications, from Andrii Nakryiko. 2) While Andrii was adding support for x86{-64}-specific logic of parsing USDT argument specification, Ilya followed-up with USDT support for s390 architecture, from Ilya Leoshkevich. 3) Support name-based attaching for uprobe BPF programs in libbpf. The format supported is `u[ret]probe/binary_path:[raw_offset|function[+offset]]`, e.g. attaching to libc malloc can be done in BPF via SEC("uprobe/libc.so.6:malloc") now, from Alan Maguire. 4) Various load/store optimizations for the arm64 JIT to shrink the image size by using arm64 str/ldr immediate instructions. Also enable pointer authentication to verify return address for JITed code, from Xu Kuohai. 5) BPF verifier fixes for write access checks to helper functions, e.g. rd-only memory from bpf_*_cpu_ptr() must not be passed to helpers that write into passed buffers, from Kumar Kartikeya Dwivedi. 6) Fix overly excessive stack map allocation for its base map structure and buckets which slipped-in from cleanups during the rlimit accounting removal back then, from Yuntao Wang. 7) Extend the unstable CT lookup helpers for XDP and tc/BPF to report netfilter connection tracking tuple direction, from Lorenzo Bianconi. 8) Improve bpftool dump to show BPF program/link type names, Milan Landaverde. 9) Minor cleanups all over the place from various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits) bpf: Fix excessive memory allocation in stack_map_alloc() selftests/bpf: Fix return value checks in perf_event_stackmap test selftests/bpf: Add CO-RE relos into linked_funcs selftests libbpf: Use weak hidden modifier for USDT BPF-side API functions libbpf: Don't error out on CO-RE relos for overriden weak subprogs samples, bpf: Move routes monitor in xdp_router_ipv4 in a dedicated thread libbpf: Allow WEAK and GLOBAL bindings during BTF fixup libbpf: Use strlcpy() in path resolution fallback logic libbpf: Add s390-specific USDT arg spec parsing logic libbpf: Make BPF-side of USDT support work on big-endian machines libbpf: Minor style improvements in USDT code libbpf: Fix use #ifdef instead of #if to avoid compiler warning libbpf: Potential NULL dereference in usdt_manager_attach_usdt() selftests/bpf: Uprobe tests should verify param/return values libbpf: Improve string parsing for uprobe auto-attach libbpf: Improve library identification for uprobe binary path resolution selftests/bpf: Test for writes to map key from BPF helpers selftests/bpf: Test passing rdonly mem to global func bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-07net-core: rx_otherhost_dropped to core_statsJeffrey Ji1-0/+5
Increment rx_otherhost_dropped counter when packet dropped due to mismatched dest MAC addr. An example when this drop can occur is when manually crafting raw packets that will be consumed by a user space application via a tap device. For testing purposes local traffic was generated using trafgen for the client and netcat to start a server Tested: Created 2 netns, sent 1 packet using trafgen from 1 to the other with "{eth(daddr=$INCORRECT_MAC...}", verified that iproute2 showed the counter was incremented. (Also had to modify iproute2 to show the stat, additional patch for that coming next.) Signed-off-by: Jeffrey Ji <[email protected]> Reviewed-by: Brian Vazquez <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-07virt: sevguest: Add support to get extended reportBrijesh Singh1-0/+13
Version 2 of GHCB specification defines Non-Automatic-Exit (NAE) to get extended guest report which is similar to the SNP_GET_REPORT ioctl. The main difference is related to the additional data that will be returned. That additional data returned is a certificate blob that can be used by the SNP guest user. The certificate blob layout is defined in the GHCB specification. The driver simply treats the blob as a opaque data and copies it to userspace. [ bp: Massage commit message, cast 1st arg of access_ok() ] Signed-off-by: Brijesh Singh <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-07virt: sevguest: Add support to derive keyBrijesh Singh1-0/+17
The SNP_GET_DERIVED_KEY ioctl interface can be used by the SNP guest to ask the firmware to provide a key derived from a root key. The derived key may be used by the guest for any purposes it chooses, such as a sealing key or communicating with the external entities. See SEV-SNP firmware spec for more information. [ bp: No need to memset "req" - it will get overwritten. ] Signed-off-by: Brijesh Singh <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Liam Merwick <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-07virt: Add SEV-SNP guest driverBrijesh Singh1-0/+50
The SEV-SNP specification provides the guest a mechanism to communicate with the PSP without risk from a malicious hypervisor who wishes to read, alter, drop or replay the messages sent. The driver uses snp_issue_guest_request() to issue GHCB SNP_GUEST_REQUEST or SNP_EXT_GUEST_REQUEST NAE events to submit the request to PSP. The PSP requires that all communication should be encrypted using key specified through a struct snp_guest_platform_data descriptor. Userspace can use SNP_GET_REPORT ioctl() to query the guest attestation report. See SEV-SNP spec section Guest Messages for more details. [ bp: Remove the "what" from the commit message, massage. ] Signed-off-by: Brijesh Singh <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-06RDMA: Split kernel-only global device caps from uverbs device capsJason Gunthorpe1-0/+4
Split out flags from ib_device::device_cap_flags that are only used internally to the kernel into kernel_cap_flags that is not part of the uapi. This limits the device_cap_flags to being the same bitmap that will be copied to userspace. This cleanly splits out the uverbs flags from the kernel flags to avoid confusion in the flags bitmap. Add some short comments describing which each of the kernel flags is connected to. Remove unused kernel flags. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2022-04-06net, uapi: remove inclusion of arpa/inet.hNick Desaulniers1-16/+12
In include/uapi/linux/tipc_config.h, there's a comment that it includes arpa/inet.h for ntohs; but ntohs is not defined in any UAPI header. For now, reuse the definitions from include/linux/byteorder/generic.h, since the various conversion functions do exist in UAPI headers: include/uapi/linux/byteorder/big_endian.h include/uapi/linux/byteorder/little_endian.h We would like to get to the point where we can build UAPI header tests with -nostdinc, meaning that kernel UAPI headers should not have a circular dependency on libc headers. Link: https://android-review.googlesource.com/c/platform/bionic/+/2048127 Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-05Merge drm/drm-next into drm-misc-nextMaxime Ripard79-577/+1478
Let's start the 5.19 development cycle. Signed-off-by: Maxime Ripard <[email protected]>
2022-04-04IB/uverbs: Move part of enum ib_device_cap_flags to uapiXiao Yang1-0/+31
1) Part of enum ib_device_cap_flags are used by ibv_query_device(3) or ibv_query_device_ex(3), so we define them in include/uapi/rdma/ib_user_verbs.h and only expose them to userspace. 2) Reformat enum ib_device_cap_flags by removing the indent before '='. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Xiao Yang <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2022-04-04IB/uverbs: Move enum ib_raw_packet_caps to uapiXiao Yang1-0/+7
This enum is used by ibv_query_device_ex(3) so it should be defined in include/uapi/rdma/ib_user_verbs.h. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Xiao Yang <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2022-04-04linux/fb.h: Spelling s/palette/palette/Geert Uytterhoeven1-1/+1
Fix a misspelling of "palette" in a comment. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Pekka Paalanen <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-04-03bpf: Correct the comment for BTF kind bitfieldHaiyue Wang1-2/+2
The commit 8fd886911a6a ("bpf: Add BTF_KIND_FLOAT to uapi") has extended the BTF kind bitfield from 4 to 5 bits, correct the comment. Signed-off-by: Haiyue Wang <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-02tracing: mark user_events as BROKENSteven Rostedt (Google)1-116/+0
After being merged, user_events become more visible to a wider audience that have concerns with the current API. It is too late to fix this for this release, but instead of a full revert, just mark it as BROKEN (which prevents it from being selected in make config). Then we can work finding a better API. If that fails, then it will need to be completely reverted. To not have the code silently bitrot, still allow building it with COMPILE_TEST. And to prevent the uapi header from being installed, then later changed, and then have an old distro user space see the old version, move the header file out of the uapi directory. Surround the include with CONFIG_COMPILE_TEST to the current location, but when the BROKEN tag is taken off, it will use the uapi directory, and fail to compile. This is a good way to remind us to move the header back. Link: https://lore.kernel.org/all/[email protected] Link: https://lkml.kernel.org/r/[email protected] Suggested-by: Mathieu Desnoyers <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-04-02KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl.David Woodhouse1-1/+3
This sets the default TSC frequency for subsequently created vCPUs. Signed-off-by: David Woodhouse <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SENDDavid Woodhouse1-0/+1
At the end of the patch series adding this batch of event channel acceleration features, finally add the feature bit which advertises them and document it all. For SCHEDOP_poll we need to wake a polling vCPU when a given port is triggered, even when it's masked — and we want to implement that in the kernel, for efficiency. So we want the kernel to know that it has sole ownership of event channel delivery. Thus, we allow userspace to make the 'promise' by setting the corresponding feature bit in its KVM_XEN_HVM_CONFIG call. As we implement SCHEDOP_poll bypass later, we will do so only if that promise has been made by userspace. Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/xen: Support per-vCPU event channel upcall via local APICDavid Woodhouse1-0/+2
Windows uses a per-vCPU vector, and it's delivered via the local APIC basically like an MSI (with associated EOI) unlike the traditional guest-wide vector which is just magically asserted by Xen (and in the KVM case by kvm_xen_has_interrupt() / kvm_cpu_get_extint()). Now that the kernel is able to raise event channel events for itself, being able to do so for Windows guests is also going to be useful. Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/xen: Kernel acceleration for XENVER_versionDavid Woodhouse1-1/+2
Turns out this is a fast path for PV guests because they use it to trigger the event channel upcall. So letting it bounce all the way up to userspace is not great. Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/xen: handle PV timers oneshot modeJoao Martins1-0/+6
If the guest has offloaded the timer virq, handle the following hypercalls for programming the timer: VCPUOP_set_singleshot_timer VCPUOP_stop_singleshot_timer set_timer_op(timestamp_ns) The event channel corresponding to the timer virq is then used to inject events once timer deadlines are met. For now we back the PV timer with hrtimer. [ dwmw2: Add save/restore, 32-bit compat mode, immediate delivery, don't check timer in kvm_vcpu_has_event() ] Signed-off-by: Joao Martins <[email protected]> Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_IDDavid Woodhouse1-0/+3
In order to intercept hypercalls such as VCPUOP_set_singleshot_timer, we need to be aware of the Xen CPU numbering. This looks a lot like the Hyper-V handling of vpidx, for obvious reasons. Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/xen: intercept EVTCHNOP_send from guestsJoao Martins1-0/+28
Userspace registers a sending @port to either deliver to an @eventfd or directly back to a local event channel port. After binding events the guest or host may wish to bind those events to a particular vcpu. This is usually done for unbound and and interdomain events. Update requests are handled via the KVM_XEN_EVTCHN_UPDATE flag. Unregistered ports are handled by the emulator. Co-developed-by: Ankur Arora <[email protected]> Co-developed-By: David Woodhouse <[email protected]> Signed-off-by: Joao Martins <[email protected]> Signed-off-by: Ankur Arora <[email protected]> Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/xen: Support direct injection of event channel eventsDavid Woodhouse1-0/+3
This adds a KVM_XEN_HVM_EVTCHN_SEND ioctl which allows direct injection of events given an explicit { vcpu, port, priority } in precisely the same form that those fields are given in the IRQ routing table. Userspace is currently able to inject 2-level events purely by setting the bits in the shared_info and vcpu_info, but FIFO event channels are harder to deal with; we will need the kernel to take sole ownership of delivery when we support those. A patch advertising this feature with a new bit in the KVM_CAP_XEN_HVM ioctl will be added in a subsequent patch. Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-01Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull block driver fixes from Jens Axboe: "Followup block driver updates and fixes for the 5.18-rc1 merge window. In detail: - NVMe pull request - Fix multipath hang when disk goes live over reconnect (Anton Eidelman) - fix RCU hole that allowed for endless looping in multipath round robin (Chris Leech) - remove redundant assignment after left shift (Colin Ian King) - add quirks for Samsung X5 SSDs (Monish Kumar R) - fix the read-only state for zoned namespaces with unsupposed features (Pankaj Raghav) - use a private workqueue instead of the system workqueue in nvmet (Sagi Grimberg) - allow duplicate NSIDs for private namespaces (Sungup Moon) - expose use_threaded_interrupts read-only in sysfs (Xin Hao)" - nbd minor allocation fix (Zhang) - drbd fixes and maintainer addition (Lars, Jakob, Christoph) - n64cart build fix (Jackie) - loop compat ioctl fix (Carlos) - misc fixes (Colin, Dongli)" * tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block: drbd: remove check of list iterator against head past the loop body drbd: remove usage of list iterator variable after loop nbd: fix possible overflow on 'first_minor' in nbd_dev_add() MAINTAINERS: add drbd co-maintainer drbd: fix potential silent data corruption loop: fix ioctl calls using compat_loop_info nvme-multipath: fix hang when disk goes live over reconnect nvme: fix RCU hole that allowed for endless looping in multipath round robin nvme: allow duplicate NSIDs for private namespaces nvmet: remove redundant assignment after left shift nvmet: use a private workqueue instead of the system workqueue nvme-pci: add quirks for Samsung X5 SSDs nvme-pci: expose use_threaded_interrupts read-only in sysfs nvme: fix the read-only state for zoned namespaces with unsupposed features n64cart: convert bi_disk to bi_bdev->bd_disk fix build xen/blkfront: fix comment for need_copy xen-blkback: remove redundant assignment to variable i
Powered by cgit, Gruvboxed by Blaster4385.