aboutsummaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)AuthorFilesLines
2023-03-13ASoC: SOF: ipc4-topology: Modify the type of available input/output formatsRanjani Sridharan1-0/+1
Introduce a new struct sof_ipc4_pin_format which contains the pin index and the buffer size. Replace the type of available input/output audio formats in struct sof_ipc4_available_audio_format with this new struct type and rename them to input_pin_fmts and output_pin_fmts. Also, add a new token, SOF_TKN_CAVS_AUDIO_FORMAT_PIN_INDEX that will be used to parse the pin index for the audio format from topology. Currently we only set the audio format for Pin 0 in topology, so the default value will be 0 for all audio formats. Finally, parse the pin_index and the input/output buffer sizes along with audio formats into the pin_format arrays in struct sof_ipc4_available_audio_format. This makes the base_config array in struct sof_ipc4_available_audio_format redundant. So remove it. This change will allow the addition of audio formats for the non-zero pins in topology transparent to the topology parser in the kernel. Signed-off-by: Ranjani Sridharan <[email protected]> Reviewed-by: Rander Wang <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-13ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE tokenRanjani Sridharan1-0/+1
Do not parse the SOF_TKN_CAVS_AUDIO_FORMAT_DMA_BUFFER_SIZE token as the dma_buffer_size can be derived from the input/output buffer size and the type of widget during copier prepare. For the deep buffer case, introduce a new token that will be used to get the deep buffer DMA size for the host copier from topology. Signed-off-by: Ranjani Sridharan <[email protected]> Reviewed-by: Rander Wang <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-13ASoC: SOF: Use input/output pin consistentlyRanjani Sridharan1-6/+6
Currently we use input/output and sink/source pins interchangeably. Remove the references to sink/source pins and replace with input/output pins everywhere for consistency and clarity. Signed-off-by: Ranjani Sridharan <[email protected]> Reviewed-by: Rander Wang <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-13ASoC: SOF: rename a couple of tokensRanjani Sridharan1-2/+2
Rename SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID and SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID as SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID_BIT_DEPTH and SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID_BIT_DEPTH respectively. These are currently not used. Signed-off-by: Ranjani Sridharan <[email protected]> Reviewed-by: Rander Wang <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-13ASoC: SOF: uapi: header: Update sof_abi_hdr doc for IPC4 usePeter Ujfalusi2-3/+10
With IPC4 the sof_abit_hdr is only used between user space (and in topology) and kernel. The same abi header is used with small differencies like different magic number and the type field have slightly different name, but similar function in IPC4 (param_id). Update the kernel documentation to highlight the differences. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Jaska Uimonen <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-13ASoC: SOF: uapi: header: Convert sof_abi_hdr comments to kernel stylePeter Ujfalusi1-8/+14
Replace the comments for sof_abi_hdr to kernel style. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Jaska Uimonen <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-10xdp: add xdp_set_features_flag utility routineLorenzo Bianconi1-0/+2
Introduce xdp_set_features_flag utility routine in order to update dynamically xdp_features according to the dynamic hw configuration via ethtool (e.g. changing number of hw rx/tx queues). Add xdp_clear_features_flag() in order to clear all xdp_feature flag. Reviewed-by: Shay Agroskin <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-10Merge tag 'wireless-next-2023-03-10' of ↵Jakub Kicinski1-2/+35
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== wireless-next patches for 6.4 Major changes: cfg80211 * 6 GHz improvements * HW timestamping support * support for randomized auth/deauth TA for PASN privacy (also for mac80211) mac80211 * radiotap TLV and EHT support for the iwlwifi sniffer * HW timestamping support * per-link debugfs for multi-link brcmfmac * support for Apple (M1 Pro/Max) devices iwlwifi * support for a few new devices * EHT sniffer support rtw88 * better support for some SDIO devices (e.g. MAC address from efuse) rtw89 * HW scan support for 8852b * better support for 6 GHz scanning * tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits) wifi: iwlwifi: mvm: fix EOF bit reporting wifi: iwlwifi: Do not include radiotap EHT user info if not needed wifi: iwlwifi: mvm: add EHT RU allocation to radiotap wifi: iwlwifi: Update logs for yoyo reset sw changes wifi: iwlwifi: mvm: clean up duplicated defines wifi: iwlwifi: rs-fw: break out for unsupported bandwidth wifi: iwlwifi: Add support for B step of BnJ-Fm4 wifi: iwlwifi: mvm: make flush code a bit clearer wifi: iwlwifi: mvm: avoid UB shift of snif_queue wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width wifi: iwlwifi: mvm: rename define to generic name wifi: iwlwifi: mvm: allow Microsoft to use TAS wifi: iwlwifi: mvm: add all EHT based on data0 info from HW wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags wifi: iwlwifi: mvm: add an helper function radiotap TLVs wifi: radiotap: separate vendor TLV into header/content wifi: iwlwifi: reduce verbosity of some logging events wifi: iwlwifi: Adding the code to get RF name for MsP device ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-10pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi headerThomas Huth1-11/+0
CONFIG_* switches should not be exposed in uapi headers, thus let's get rid of the USE_WCACHING macro here (which was also named way to generic) and integrate the logic directly in the only function that needs it. Suggested-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-03-10Move bp_type_idx to include/linux/hw_breakpoint.hPalmer Dabbelt1-10/+0
This has a "#ifdef CONFIG_*" that used to be exposed to userspace. The names in here are so generic that I don't think it's a good idea to expose them to userspace (or even the rest of the kernel). There are multiple in-kernel users, so it's been moved to a kernel header file. Signed-off-by: Palmer Dabbelt <[email protected]> Reviewed-by: Andrew Waterman <[email protected]> Reviewed-by: Albert Ou <[email protected]> Message-Id: <[email protected]> [thuth: Remove it also from tools/include/uapi/linux/hw_breakpoint.h] Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-03-10Move ep_take_care_of_epollwakeup() to fs/eventpoll.cPalmer Dabbelt1-12/+0
This doesn't make any sense to expose to userspace, so it's been moved to the one user. This was introduced by commit 95f19f658ce1 ("epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled"). Signed-off-by: Palmer Dabbelt <[email protected]> Reviewed-by: Andrew Waterman <[email protected]> Reviewed-by: Albert Ou <[email protected]> Message-Id: <[email protected]> [thuth: Rebased to fix contextual conflicts] Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-03-10Move COMPAT_ATM_ADDPARTY to net/atm/svc.cPalmer Dabbelt1-4/+0
This used to be behind an #ifdef COMPAT_COMPAT, so most of userspace wouldn't have seen the definition before. Unfortunately this header file became visible to userspace, so the definition has instead been moved to net/atm/svc.c (the only user). Signed-off-by: Palmer Dabbelt <[email protected]> Reviewed-by: Andrew Waterman <[email protected]> Reviewed-by: Albert Ou <[email protected]> Message-Id: <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-03-10Merge tag 'for-6.3-rc1-tag' of ↵Linus Torvalds1-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "First batch of fixes. Among them there are two updates to sysfs and ioctl which are not strictly fixes but are used for testing so there's no reason to delay them. - fix block group item corruption after inserting new block group - fix extent map logging bit not cleared for split maps after dropping range - fix calculation of unusable block group space reporting bogus values due to 32/64b division - fix unnecessary increment of read error stat on write error - improve error handling in inode update - export per-device fsid in DEV_INFO ioctl to distinguish seeding devices, needed for testing - allocator size classes: - fix potential dead lock in size class loading logic - print sysfs stats for the allocation classes" * tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix block group item corruption after inserting new block group btrfs: fix extent map logging bit not cleared for split maps after dropping range btrfs: fix percent calculation for bg reclaim message btrfs: fix unnecessary increment of read error stat on write error btrfs: handle btrfs_del_item errors in __btrfs_update_delayed_inode btrfs: ioctl: return device fsid from DEV_INFO ioctl btrfs: fix potential dead lock in size class loading logic btrfs: sysfs: add size class stats
2023-03-09Merge branch 'main' of ↵Jakub Kicinski1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Florian Westphal says: ==================== Netfilter updates for net-next 1. nf_tables 'brouting' support, from Sriram Yagnaraman. 2. Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header, from Xin Long. This comes with a test BIG TCP test case, added to tools/testing/selftests/net/. 3. Fix spelling and indentation in conntrack, from Jeremy Sowden. * 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nat: fix indentation of function arguments netfilter: conntrack: fix typo selftests: add a selftest for big tcp netfilter: use nf_ip6_check_hbh_len in nf_ct_skb_network_trim netfilter: move br_nf_check_hbh_len to utils netfilter: bridge: move pskb_trim_rcsum out of br_nf_check_hbh_len netfilter: bridge: check len before accessing more nh data netfilter: bridge: call pskb_may_pull in br_nf_check_hbh_len netfilter: bridge: introduce broute meta statement ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-9/+17
Documentation/bpf/bpf_devel_QA.rst b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info") d56b0c461d19 ("bpf, docs: Fix link to netdev-FAQ target") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-09bpf: Fix a typo for BPF_F_ANY_ALIGNMENT in bpf.hMichael Weiß1-1/+1
Fix s/BPF_PROF_LOAD/BPF_PROG_LOAD/ typo in the documentation comment for BPF_F_ANY_ALIGNMENT in bpf.h. Signed-off-by: Michael Weiß <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-03-09Merge tag 'net-6.3-rc2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - core: avoid skb end_offset change in __skb_unclone_keeptruesize() - sched: - act_connmark: handle errno on tcf_idr_check_alloc - flower: fix fl_change() error recovery path - ieee802154: prevent user from crashing the host Current release - new code bugs: - eth: bnxt_en: fix the double free during device removal - tools: ynl: - fix enum-as-flags in the generic CLI - fully inherit attrs in subsets - re-license uniformly under GPL-2.0 or BSD-3-clause Previous releases - regressions: - core: use indirect calls helpers for sk_exit_memory_pressure() - tls: - fix return value for async crypto - avoid hanging tasks on the tx_lock - eth: ice: copy last block omitted in ice_get_module_eeprom() Previous releases - always broken: - core: avoid double iput when sock_alloc_file fails - af_unix: fix struct pid leaks in OOB support - tls: - fix possible race condition - fix device-offloaded sendpage straddling records - bpf: - sockmap: fix an infinite loop error - test_run: fix &xdp_frame misplacement for LIVE_FRAMES - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR - netfilter: tproxy: fix deadlock due to missing BH disable - phylib: get rid of unnecessary locking - eth: bgmac: fix *initial* chip reset to support BCM5358 - eth: nfp: fix csum for ipsec offload - eth: mtk_eth_soc: fix RX data corruption issue Misc: - usb: qmi_wwan: add telit 0x1080 composition" * tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) tools: ynl: fix enum-as-flags in the generic CLI tools: ynl: move the enum classes to shared code net: avoid double iput when sock_alloc_file fails af_unix: fix struct pid leaks in OOB support eth: fealnx: bring back this old driver net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC net: microchip: sparx5: fix deletion of existing DSCP mappings octeontx2-af: Unlock contexts in the queue context cache in case of fault detection net/smc: fix fallback failed while sendmsg with fastopen ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause mailmap: update entries for Stephen Hemminger mailmap: add entry for Maxim Mikityanskiy nfc: change order inside nfc_se_io error path ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation net: usb: qmi_wwan: add Telit 0x1080 composition net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990 netfilter: conntrack: adopt safer max chain length net: tls: fix device-offloaded sendpage straddling records ...
2023-03-09char: pcmcia: remove all the driversJiri Slaby1-64/+0
These char PCMCIA drivers are buggy[1] and receive only minimal care. It was concluded[2], that we should try to remove most pcmcia drivers completely. Let's start with these char broken one. Note that I also removed a UAPI header: include/uapi/linux/cm4000_cs.h. I found only coccinelle tests mentioning some ioctl constants from that file. But they are not actually used. Anyway, should someone complain, we may reintroduce the header (or its parts). [1] https://lore.kernel.org/all/[email protected]/ [2] https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jiri Slaby (SUSE) <[email protected]> Cc: "Hyunwoo Kim" <[email protected]> Cc: Harald Welte <[email protected]> Cc: Lubomir Rintel <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Acked-by: Dominik Brodowski <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-09sctp: add weighted fair queueing stream schedulerXin Long1-1/+2
As it says in rfc8260#section-3.6 about the weighted fair queueing scheduler: A Weighted Fair Queueing scheduler between the streams is used. The weight is configurable per outgoing SCTP stream. This scheduler considers the lengths of the messages of each stream and schedules them in a specific way to use the capacity according to the given weights. If the weight of stream S1 is n times the weight of stream S2, the scheduler should assign to stream S1 n times the capacity it assigns to stream S2. The details are implementation dependent. Interleaving user messages allows for a better realization of the capacity usage according to the given weights. This patch adds Weighted Fair Queueing Scheduler actually based on the code of Fair Capacity Scheduler by adding fc_weight into struct sctp_stream_out_ext and taking it into account when sorting stream-> fc_list in sctp_sched_fc_sched() and sctp_sched_fc_dequeue_done(). Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-09sctp: add fair capacity stream schedulerXin Long1-1/+2
As it says in rfc8260#section-3.5 about the fair capacity scheduler: A fair capacity distribution between the streams is used. This scheduler considers the lengths of the messages of each stream and schedules them in a specific way to maintain an equal capacity for all streams. The details are implementation dependent. interleaving user messages allows for a better realization of the fair capacity usage. This patch adds Fair Capacity Scheduler based on the foundations added by commit 5bbbbe32a431 ("sctp: introduce stream scheduler foundations"): A fc_list and a fc_length are added into struct sctp_stream_out_ext and a fc_list is added into struct sctp_stream. In .enqueue, when there are chunks enqueued into a stream, this stream will be linked into stream-> fc_list by its fc_list ordered by its fc_length. In .dequeue, it always picks up the 1st skb from stream->fc_list. In .dequeue_done, fc_length is increased by chunk's len and update its location in stream->fc_list according to the its new fc_length. Note that when the new fc_length overflows in .dequeue_done, instead of resetting all fc_lengths to 0, we only reduced them by U32_MAX / 4 to avoid a moment of imbalance in the scheduling, as Marcelo suggested. Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-08bpf: implement numbers iteratorAndrii Nakryiko1-0/+8
Implement the first open-coded iterator type over a range of integers. It's public API consists of: - bpf_iter_num_new() constructor, which accepts [start, end) range (that is, start is inclusive, end is exclusive). - bpf_iter_num_next() which will keep returning read-only pointer to int until the range is exhausted, at which point NULL will be returned. If bpf_iter_num_next() is kept calling after this, NULL will be persistently returned. - bpf_iter_num_destroy() destructor, which needs to be called at some point to clean up iterator state. BPF verifier enforces that iterator destructor is called at some point before BPF program exits. Note that `start = end = X` is a valid combination to setup an empty iterator. bpf_iter_num_new() will return 0 (success) for any such combination. If bpf_iter_num_new() detects invalid combination of input arguments, it returns error, resets iterator state to, effectively, empty iterator, so any subsequent call to bpf_iter_num_next() will keep returning NULL. BPF verifier has no knowledge that returned integers are in the [start, end) value range, as both `start` and `end` are not statically known and enforced: they are runtime values. While the implementation is pretty trivial, some care needs to be taken to avoid overflows and underflows. Subsequent selftests will validate correctness of [start, end) semantics, especially around extremes (INT_MIN and INT_MAX). Similarly to bpf_loop(), we enforce that no more than BPF_MAX_LOOPS can be specified. bpf_iter_num_{new,next,destroy}() is a logical evolution from bounded BPF loops and bpf_loop() helper and is the basis for implementing ergonomic BPF loops with no statically known or verified bounds. Subsequent patches implement bpf_for() macro, demonstrating how this can be wrapped into something that works and feels like a normal for() loop in C language. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-03-08netfilter: bridge: introduce broute meta statementSriram Yagnaraman1-0/+2
nftables equivalent for ebtables -t broute. Implement broute meta statement to set br_netfilter_broute flag in skb to force a packet to be routed instead of being bridged. Signed-off-by: Sriram Yagnaraman <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-03-07ynl: re-license uniformly under GPL-2.0 OR BSD-3-ClauseJakub Kicinski2-2/+2
I was intending to make all the Netlink Spec code BSD-3-Clause to ease the adoption but it appears that: - I fumbled the uAPI and used "GPL WITH uAPI note" there - it gives people pause as they expect GPL in the kernel As suggested by Chuck re-license under dual. This gives us benefit of full BSD freedom while fulfilling the broad "kernel is under GPL" expectations. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-07wifi: nl80211: Add support for randomizing TA of auth and deauth framesVeerendranath Jakkam1-0/+5
Add support to use a random local address in authentication and deauthentication frames sent to unassociated peer when the driver supports. The driver needs to configure receive behavior to accept frames with random transmit address specified in TX path authentication frames during the time of the frame exchange is pending and such frames need to be acknowledged similarly to frames sent to the local permanent address when this random address functionality is used. This capability allows use of randomized transmit address for PASN authentication frames to improve privacy of WLAN clients. Signed-off-by: Veerendranath Jakkam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-03-07wifi: nl80211: add a command to enable/disable HW timestampingAvraham Stern1-0/+22
Add a command to enable and disable HW timestamping of TM and FTM frames. HW timestamping can be enabled for a specific mac address or for all addresses. The low level driver will indicate how many peers HW timestamping can be enabled concurrently, and this information will be passed to userspace. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230301115906.05678d7b1c17.Iccc08869ea8156f1c71a3111a47f86dd56234bd0@changeid [switch to needing netdev UP, minor edits] Signed-off-by: Johannes Berg <[email protected]>
2023-03-07wifi: nl80211: Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZIlan Peer1-2/+8
Add a detailed description of NL80211_SCAN_FLAG_COLOCATED_6GHZ flag. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230301115906.487ab04feb39.I5129fd61841332474693046241586f057b134c3c@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-03-06Merge tag 'for-netdev' of ↵Jakub Kicinski1-2/+31
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-03-06 We've added 85 non-merge commits during the last 13 day(s) which contain a total of 131 files changed, 7102 insertions(+), 1792 deletions(-). The main changes are: 1) Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses, from Joanne Koong. 2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities, from Andrii Nakryiko. 3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc, from Alexei Starovoitov. 4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps, from Kumar Kartikeya Dwivedi. 5) Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them, from Eduard Zingerman. 6) Make uprobe attachment Android APK aware by supporting attachment to functions inside ELF objects contained in APKs via function names, from Daniel Müller. 7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper to start the timer with absolute expiration value instead of relative one, from Tero Kristo. 8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id, from Tejun Heo. 9) Extend libbpf to support users manually attaching kprobes/uprobes in the legacy/perf/link mode, from Menglong Dong. 10) Implement workarounds in the mips BPF JIT for DADDI/R4000, from Jiaxun Yang. 11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT, from Hengqi Chen. 12) Extend BPF instruction set doc with describing the encoding of BPF instructions in terms of how bytes are stored under big/little endian, from Jose E. Marchesi. 13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui. 14) Fix bpf_xdp_query() backwards compatibility on old kernels, from Yonghong Song. 15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS, from Florent Revest. 16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache, from Hou Tao. 17) Fix BPF verifier's check_subprogs to not unnecessarily mark a subprogram with has_tail_call, from Ilya Leoshkevich. 18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode selftests/bpf: Split test_attach_probe into multi subtests libbpf: Add support to set kprobe/uprobe attach mode tools/resolve_btfids: Add /libsubcmd to .gitignore bpf: add support for fixed-size memory pointer returns for kfuncs bpf: generalize dynptr_get_spi to be usable for iters bpf: mark PTR_TO_MEM as non-null register type bpf: move kfunc_call_arg_meta higher in the file bpf: ensure that r0 is marked scratched after any function call bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper bpf: clean up visit_insn()'s instruction processing selftests/bpf: adjust log_fixup's buffer size for proper truncation bpf: honor env->test_state_freq flag in is_state_visited() selftests/bpf: enhance align selftest's expected log matching bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER} bpf: improve stack slot state printing selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access() selftests/bpf: test if pointer type is tracked for BPF_ST_MEM bpf: allow ctx writes using BPF_ST_MEM instruction bpf: Use separate RCU callbacks for freeing selem ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-06fs: dlm: remove deprecated code partsAlexander Aring3-61/+5
This patch removes code parts which was declared deprecated by commit 6b0afc0cc3e9 ("fs: dlm: don't use deprecated timeout features by default"). This contains the following dlm functionality: - start a cancel of a dlm request did not complete after certain timeout: The current way how dlm cancellation works and interfering with other dlm requests triggered by the user can end in an overlapping and returning in -EBUSY. The most user don't handle this case and are unaware that DLM can return such errno in such situation. Due the timeout the user are mostly unaware when this happens. - start a netlink warning messages for user space if dlm requests did not complete after certain timeout: This feature was never being built in the only known dlm user space side. As we are to remove the timeout cancellation feature we can directly remove this feature as well. There might be the possibility to bring the timeout cancellation feature back. However the current way of handling the -EBUSY case which is only a software limitation and not a hardware limitation should be changed. We minimize the current code base in DLM cancellation feature to not have to deal with those existing features while solving the DLM cancellation feature in general. UAPI define DLM_LSFL_TIMEWARN is commented as deprecated and reserved value. We should avoid at first to give it a new meaning but let possible users still compile by keeping this define. In far future we can give this flag a new meaning. The same for the DLM_LKF_TIMEOUT lock request flag. Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David Teigland <[email protected]>
2023-03-06btrfs: ioctl: return device fsid from DEV_INFO ioctlQu Wenruo1-1/+11
Currently user space utilizes dev info ioctl to grab the info of a certain devid, this includes its device uuid. But the returned info is not enough to determine if a device is a seed. Commit a26d60dedf9a ("btrfs: sysfs: add devinfo/fsid to retrieve actual fsid from the device") exports the same value in sysfs so this is for parity with ioctl. Add a new member, fsid, into btrfs_ioctl_dev_info_args, and populate the member with fsid value. This should not cause any compatibility problem, following the combinations: - Old user space, old kernel - Old user space, new kernel User space tool won't even check the new member. - New user space, old kernel The kernel won't touch the new member, and user space tool should zero out its argument, thus the new member is all zero. User space tool can then know the kernel doesn't support this fsid reporting, and falls back to whatever they can. - New user space, new kernel Go as planned. Would find the fsid member is no longer zero, and trust its value. Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-03-05ASoC: uapi: Replace zero-length arrays with __DECLARE_FLEX_ARRAY() helperGustavo A. R. Silva1-3/+3
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new __DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/227 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Amadeusz Sławiński <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]>
2023-03-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-7/+1
Pull more SCSI updates from James Bottomley: "Updates that missed the first pull, mostly because of needing more soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an enclosure services (ses) update (mostly bug fixes) and other minor bug fixes and changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: zfcp: Trace when request remove fails after qdio send fails scsi: zfcp: Change the type of all fsf request id fields and variables to u64 scsi: zfcp: Make the type for accessing request hashtable buckets size_t scsi: ufs: core: Simplify ufshcd_execute_start_stop() scsi: ufs: core: Rely on the block layer for setting RQF_PM scsi: core: Extend struct scsi_exec_args scsi: lpfc: Fix double word in comments scsi: core: Remove the /proc/scsi/${proc_name} directory earlier scsi: core: Fix a source code comment scsi: cxgbi: Remove unneeded version.h include scsi: qedi: Remove unneeded version.h include scsi: mpi3mr: Remove unneeded version.h include scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization scsi: mpi3mr: Use number of bits to manage bitmap sizes scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() scsi: mpi3mr: Fix an issue found by KASAN scsi: mpi3mr: Replace 1-element array with flex-array scsi: ipr: Work around fortify-string warning scsi: ipr: Make ipr_probe_ioa_part2() return void ...
2023-03-03Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linuxLinus Torvalds1-0/+1
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Don't access released socket during error recovery (Akinobu Mita) - Bring back auto-removal of deleted namespaces during sequential scan (Christoph Hellwig) - Fix an error code in nvme_auth_process_dhchap_challenge (Dan Carpenter) - Show well known discovery name (Daniel Wagner) - Add a missing endianess conversion in effects masking (Keith Busch) - Fix for a regression introduced in blk-rq-qos during init in this merge window (Breno) - Reorder a few fields in struct blk_mq_tag_set, eliminating a few holes and shrinking it (Christophe) - Remove redundant bdev_get_queue() NULL checks (Juhyung) - Add sed-opal single user mode support flag (Luca) - Remove SQE128 check in ublk as it isn't needed, saving some memory (Ming) - Op specific segment checking for cloned requests (Uday) - Exclusive open partition scan fixes (Yu) - Loop offset/size checking before assigning them in the device (Zhong) - Bio polling fixes (me) * tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux: blk-mq: enforce op-specific segment limits in blk_insert_cloned_request nvme-fabrics: show well known discovery name nvme-tcp: don't access released socket during error recovery nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge() nvme: bring back auto-removal of deleted namespaces during sequential scan blk-iocost: Pass gendisk to ioc_refresh_params nvme: fix sparse warning on effects masking block: be a bit more careful in checking for NULL bdev while polling block: clear bio->bi_bdev when putting a bio back in the cache loop: loop_set_status_from_info() check before assignment ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd block: remove more NULL checks after bdev_get_queue() blk-mq: Reorder fields in 'struct blk_mq_tag_set' block: fix scan partition for exclusively open device again block: Revert "block: Do not reread partition table on exclusively open device" sed-opal: add support flag for SUM in status ioctl
2023-03-02bpf: Add support for absolute value BPF timersTero Kristo1-0/+15
Add a new flag BPF_F_TIMER_ABS that can be passed to bpf_timer_start() to start an absolute value timer instead of the default relative value. This makes the timer expire at an exact point in time, instead of a time with latencies induced by both the BPF and timer subsystems. Suggested-by: Artem Bityutskiy <[email protected]> Signed-off-by: Tero Kristo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-03-02Merge tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+11
Pull drm fixes from Dave Airlie: "fbdev: - fix uninit var in error path shmem: - revert unGPLing an export i915: - Don't use stolen memory or BAR mappings for ring buffers with LLC - Add inverted backlight quirk for HP 14-r206nv - Fix GSI offset for MCR lookups - GVT fixes (memleak, debugfs attributes, kconfig, typos) amdgpu: - SMU 13 fixes - Enable TMZ for GC 10.3.6 - Misc display fixes - Buddy allocator fixes - GC 11 fixes - S0ix fix - INFO IOCTL queries for GC 11 - VCN harvest fixes for SR-IOV - UMC 8.10 RAS fixes - Don't restrict bpc to 8 - NBIO 7.5 fix - Allow freesync on PCon for more devices amdkfd: - SDMA fix - Illegal memory access fix" * tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits) drm/amdgpu/vcn: fix compilation issue with legacy gcc drm/amd/display: Extend Freesync over PCon support for more devices Revert "drm/amd/display: Do not set DRR on pipe commit" drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes drm/amd/display: Ext displays with dock can't recognized after resume drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini drm/amdgpu: remove unused variable ring drm/amd/display: fix dm irq error message in gpu recover drm/amd: Fix initialization for nbio 7.5.1 drm/amd/display: Don't restrict bpc to 8 bpc drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable drm/radeon: Fix eDP for single-display iMac11,2 drm/shmem-helper: Revert accidental non-GPL export drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init() drm/amd/pm: downgrade log level upon SMU IF version mismatch drm/amdgpu: Add ecc info query interface for umc v8_10 drm/amdgpu: Add convert_error_address function for umc v8_10 drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err drm/amdgpu: change default behavior of bad_page_threshold parameter drm/amdgpu: exclude duplicate pages from UMC RAS UE count ...
2023-03-01bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwrJoanne Koong1-0/+5
Two new kfuncs are added, bpf_dynptr_slice and bpf_dynptr_slice_rdwr. The user must pass in a buffer to store the contents of the data slice if a direct pointer to the data cannot be obtained. For skb and xdp type dynptrs, these two APIs are the only way to obtain a data slice. However, for other types of dynptrs, there is no difference between bpf_dynptr_slice(_rdwr) and bpf_dynptr_data. For skb type dynptrs, the data is copied into the user provided buffer if any of the data is not in the linear portion of the skb. For xdp type dynptrs, the data is copied into the user provided buffer if the data is between xdp frags. If the skb is cloned and a call to bpf_dynptr_data_rdwr is made, then the skb will be uncloned (see bpf_unclone_prologue()). Please note that any bpf_dynptr_write() automatically invalidates any prior data slices of the skb dynptr. This is because the skb may be cloned or may need to pull its paged buffer into the head. As such, any bpf_dynptr_write() will automatically have its prior data slices invalidated, even if the write is to data in the skb head of an uncloned skb. Please note as well that any other helper calls that change the underlying packet buffer (eg bpf_skb_pull_data()) invalidates any data slices of the skb dynptr as well, for the same reasons. Signed-off-by: Joanne Koong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-03-01bpf: Add xdp dynptrsJoanne Koong1-1/+1
Add xdp dynptrs, which are dynptrs whose underlying pointer points to a xdp_buff. The dynptr acts on xdp data. xdp dynptrs have two main benefits. One is that they allow operations on sizes that are not statically known at compile-time (eg variable-sized accesses). Another is that parsing the packet data through dynptrs (instead of through direct access of xdp->data and xdp->data_end) can be more ergonomic and less brittle (eg does not need manual if checking for being within bounds of data_end). For reads and writes on the dynptr, this includes reading/writing from/to and across fragments. Data slices through the bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and bpf_dynptr_slice_rdwr() should be used. For examples of how xdp dynptrs can be used, please see the attached selftests. Signed-off-by: Joanne Koong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-03-01bpf: Add skb dynptrsJoanne Koong1-2/+11
Add skb dynptrs, which are dynptrs whose underlying pointer points to a skb. The dynptr acts on skb data. skb dynptrs have two main benefits. One is that they allow operations on sizes that are not statically known at compile-time (eg variable-sized accesses). Another is that parsing the packet data through dynptrs (instead of through direct access of skb->data and skb->data_end) can be more ergonomic and less brittle (eg does not need manual if checking for being within bounds of data_end). For bpf prog types that don't support writes on skb data, the dynptr is read-only (bpf_dynptr_write() will return an error) For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write() interfaces, reading and writing from/to data in the head as well as from/to non-linear paged buffers is supported. Data slices through the bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used. For examples of how skb dynptrs can be used, please see the attached selftests. Signed-off-by: Joanne Koong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-03-01Merge tag 'loongarch-6.3' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Make -mstrict-align configurable - Add kernel relocation and KASLR support - Add single kernel image implementation for kdump - Add hardware breakpoints/watchpoints support - Add kprobes/kretprobes/kprobes_on_ftrace support - Add LoongArch support for some selftests. * tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits) selftests/ftrace: Add LoongArch kprobe args string tests support selftests/seccomp: Add LoongArch selftesting support tools: Add LoongArch build infrastructure samples/kprobes: Add LoongArch support LoongArch: Mark some assembler symbols as non-kprobe-able LoongArch: Add kprobes on ftrace support LoongArch: Add kretprobes support LoongArch: Add kprobes support LoongArch: Simulate branch and PC* instructions LoongArch: ptrace: Add hardware single step support LoongArch: ptrace: Add function argument access API LoongArch: ptrace: Expose hardware breakpoints to debuggers LoongArch: Add hardware breakpoints/watchpoints support LoongArch: kdump: Add crashkernel=YM handling LoongArch: kdump: Add single kernel image implementation LoongArch: Add support for kernel address space layout randomization (KASLR) LoongArch: Add support for kernel relocation LoongArch: Add la_abs macro implementation LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs LoongArch: Use la.pcrel instead of la.abs when it's trivially possible ...
2023-02-28drm/amdkfd: Implement DMA buf fd export from KFDFelix Kuehling1-2/+12
Exports a DMA buf fd of a given KFD buffer handle. This is intended for being able to import KFD BOs into GEM contexts to leverage the amdgpu_bo_va API for more flexible virtual address mappings. It will also be used for the new upstreamable RDMA solution coming to UCX and RCCL. The corresponding user mode change (Thunk API and kfdtest) is here: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf Signed-off-by: Felix Kuehling <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Xiaogang Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-02-27Merge tag 'net-6.3-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...
2023-02-27Merge tag 'fuse-update-6.3' of ↵Linus Torvalds1-1/+44
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Fix regression in fileattr permission checking - Fix possible hang during PID namespace destruction - Add generic support for request extensions - Add supplementary group list extension - Add limited support for supplying supplementary groups in create requests - Documentation fixes * tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: add inode/permission checks to fileattr_get/fileattr_set fuse: fix all W=1 kernel-doc warnings fuse: in fuse_flush only wait if someone wants the return code fuse: optional supplementary group in create requests fuse: add request extension
2023-02-26Merge tag 'media/v6.3-1' of ↵Linus Torvalds3-74/+73
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ...
2023-02-25Merge tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds1-6/+9
Pull VFIO updates from Alex Williamson: - Remove redundant resource check in vfio-platform (Angus Chen) - Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing removal of arbitrary kernel limits in favor of cgroup control (Yishai Hadas) - mdev tidy-ups, including removing the module-only build restriction for sample drivers, Kconfig changes to select mdev support, documentation movement to keep sample driver usage instructions with sample drivers rather than with API docs, remove references to out-of-tree drivers in docs (Christoph Hellwig) - Fix collateral breakages from mdev Kconfig changes (Arnd Bergmann) - Make mlx5 migration support match device support, improve source and target flows to improve pre-copy support and reduce downtime (Yishai Hadas) - Convert additional mdev sysfs case to use sysfs_emit() (Bo Liu) - Resolve copy-paste error in mdev mbochs sample driver Kconfig (Ye Xingchen) - Avoid propagating missing reset error in vfio-platform if reset requirement is relaxed by module option (Tomasz Duszynski) - Range size fixes in mlx5 variant driver for missed last byte and stricter range calculation (Yishai Hadas) - Fixes to suspended vaddr support and locked_vm accounting, excluding mdev configurations from the former due to potential to indefinitely block kernel threads, fix underflow and restore locked_vm on new mm (Steve Sistare) - Update outdated vfio documentation due to new IOMMUFD interfaces in recent kernels (Yi Liu) - Resolve deadlock between group_lock and kvm_lock, finally (Matthew Rosato) - Fix NULL pointer in group initialization error path with IOMMUFD (Yan Zhao) * tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio: (32 commits) vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd docs: vfio: Update vfio.rst per latest interfaces vfio: Update the kdoc for vfio_device_ops vfio/mlx5: Fix range size calculation upon tracker creation vfio: no need to pass kvm pointer during device open vfio: fix deadlock between group lock and kvm lock vfio: revert "iommu driver notify callback" vfio/type1: revert "implement notify callback" vfio/type1: revert "block on invalid vaddr" vfio/type1: restore locked_vm vfio/type1: track locked_vm per dma vfio/type1: prevent underflow of locked_vm via exec() vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR vfio: platform: ignore missing reset if disabled at module init vfio/mlx5: Improve the target side flow to reduce downtime vfio/mlx5: Improve the source side flow upon pre_copy vfio/mlx5: Check whether VF is migratable samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS vfio/mdev: Use sysfs_emit() to instead of sprintf() vfio-mdev: add back CONFIG_VFIO dependency ...
2023-02-25Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-0/+115
Pull virtio updates from Michael Tsirkin: - device feature provisioning in ifcvf, mlx5 - new SolidNET driver - support for zoned block device in virtio blk - numa support in virtio pmem - VIRTIO_F_RING_RESET support in vhost-net - more debugfs entries in mlx5 - resume support in vdpa - completion batching in virtio blk - cleanup of dma api use in vdpa - now simulating more features in vdpa-sim - documentation, features, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa/mlx5: support device features provisioning vdpa/mlx5: make MTU/STATUS presence conditional on feature bits vdpa: validate device feature provisioning against supported class vdpa: validate provisioned device features against specified attribute vdpa: conditionally read STATUS in config space vdpa: fix improper error message when adding vdpa dev vdpa/mlx5: Initialize CVQ iotlb spinlock vdpa/mlx5: Don't clear mr struct on destroy MR vdpa/mlx5: Directly assign memory key tools/virtio: enable to build with retpoline vringh: fix a typo in comments for vringh_kiov vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails scsi: virtio_scsi: fix handling of kmalloc failure vdpa: Fix a couple of spelling mistakes in some messages vhost-net: support VIRTIO_F_RING_RESET vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit vdpa: mlx5: support per virtqueue dma device vdpa: set dma mask for vDPA device virtio-vdpa: support per vq dma device vdpa: introduce get_vq_dma_device() ...
2023-02-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+9
Pull kvm updates from Paolo Bonzini: "ARM: - Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company) - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer RISC-V: - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE - Correctly place the guest in S-mode after redirecting a trap to the guest - Redirect illegal instruction traps to guest - SBI PMU support for guest s390: - Sort out confusion between virtual and physical addresses, which currently are the same on s390 - A new ioctl that performs cmpxchg on guest memory - A few fixes x86: - Change tdp_mmu to a read-only parameter - Separate TDP and shadow MMU page fault paths - Enable Hyper-V invariant TSC control - Fix a variety of APICv and AVIC bugs, some of them real-world, some of them affecting architecurally legal but unlikely to happen in practice - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Advertise support for Intel's new fast REP string features - Fix a double-shootdown issue in the emergency reboot code - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM similar treatment to VMX - Update Xen's TSC info CPUID sub-leaves as appropriate - Add support for Hyper-V's extended hypercalls, where "support" at this point is just forwarding the hypercalls to userspace - Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and MSR filters - One-off fixes and cleanups - Fix and cleanup the range-based TLB flushing code, used when KVM is running on Hyper-V - Add support for filtering PMU events using a mask. If userspace wants to restrict heavily what events the guest can use, it can now do so without needing an absurd number of filter entries - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU support is disabled - Add PEBS support for Intel Sapphire Rapids - Fix a mostly benign overflow bug in SEV's send|receive_update_data() - Move several SVM-specific flags into vcpu_svm x86 Intel: - Handle NMI VM-Exits before leaving the noinstr region - A few trivial cleanups in the VM-Enter flows - Stop enabling VMFUNC for L1 purely to document that KVM doesn't support EPTP switching (or any other VM function) for L1 - Fix a crash when using eVMCS's enlighted MSR bitmaps Generic: - Clean up the hardware enable and initialization flow, which was scattered around multiple arch-specific hooks. Instead, just let the arch code call into generic code. Both x86 and ARM should benefit from not having to fight common KVM code's notion of how to do initialization - Account allocations in generic kvm_arch_alloc_vm() - Fix a memory leak if coalesced MMIO unregistration fails selftests: - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct hypercall instruction instead of relying on KVM to patch in VMMCALL - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits) KVM: SVM: hyper-v: placate modpost section mismatch error KVM: x86/mmu: Make tdp_mmu_allowed static KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes KVM: arm64: nv: Filter out unsupported features from ID regs KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2 KVM: arm64: nv: Allow a sysreg to be hidden from userspace only KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2 KVM: arm64: nv: Handle SMCs taken from virtual EL2 KVM: arm64: nv: Handle trapped ERET from virtual EL2 KVM: arm64: nv: Inject HVC exceptions to the virtual EL2 KVM: arm64: nv: Support virtual EL2 exceptions KVM: arm64: nv: Handle HCR_EL2.NV system register traps KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state KVM: arm64: nv: Add EL2 system registers to vcpu context KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set KVM: arm64: nv: Introduce nested virtualization VCPU feature KVM: arm64: Use the S2 MMU context to iterate over S2 table ...
2023-02-25Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds2-5/+26
Pull Compute Express Link (CXL) updates from Dan Williams: "To date Linux has been dependent on platform-firmware to map CXL RAM regions and handle events / errors from devices. With this update we can now parse / update the CXL memory layout, and report events / errors from devices. This is a precursor for the CXL subsystem to handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that for DDR-attached-DRAM is handled by the EDAC driver where it maps system physical address events to a field-replaceable-unit (FRU / endpoint device). In general, CXL has the potential to standardize what has historically been a pile of memory-controller-specific error handling logic. Another change of note is the default policy for handling RAM-backed device-dax instances. Previously the default access mode was "device", mmap(2) a device special file to access memory. The new default is "kmem" where the address range is assigned to the core-mm via add_memory_driver_managed(). This saves typical users from wondering why their platform memory is not visible via free(1) and stuck behind a device-file. At the same time it allows expert users to deploy policy to, for example, get dedicated access to high performance memory, or hide low performance memory from general purpose kernel allocations. This affects not only CXL, but also systems with high-bandwidth-memory that platform-firmware tags with the EFI_MEMORY_SP (special purpose) designation. Summary: - CXL RAM region enumeration: instantiate 'struct cxl_region' objects for platform firmware created memory regions - CXL RAM region provisioning: complement the existing PMEM region creation support with RAM region support - "Soft Reservation" policy change: Online (memory hot-add) soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for setting aside such memory for dedicated access via device-dax. - CXL Events and Interrupts: Takeover CXL event handling from platform-firmware (ACPI calls this CXL Memory Error Reporting) and export CXL Events via Linux Trace Events. - Convey CXL _OSC results to drivers: Similar to PCI, let the CXL subsystem interrogate the result of CXL _OSC negotiation. - Emulate CXL DVSEC Range Registers as "decoders": Allow for first-generation devices that pre-date the definition of the CXL HDM Decoder Capability to translate the CXL DVSEC Range Registers into 'struct cxl_decoder' objects. - Set timestamp: Per spec, set the device timestamp in case of hotplug, or if platform-firwmare failed to set it. - General fixups: linux-next build issues, non-urgent fixes for pre-production hardware, unit test fixes, spelling and debug message improvements" * tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits) dax/kmem: Fix leak of memory-hotplug resources cxl/mem: Add kdoc param for event log driver state cxl/trace: Add serial number to trace points cxl/trace: Add host output to trace points cxl/trace: Standardize device information output cxl/pci: Remove locked check for dvsec_range_allowed() cxl/hdm: Add emulation when HDM decoders are not committed cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders cxl/hdm: Emulate HDM decoder from DVSEC range registers cxl/pci: Refactor cxl_hdm_decode_init() cxl/port: Export cxl_dvsec_rr_decode() to cxl_port cxl/pci: Break out range register decoding from cxl_hdm_decode_init() cxl: add RAS status unmasking for CXL cxl: remove unnecessary calling of pci_enable_pcie_error_reporting() dax/hmem: build hmem device support as module if possible dax: cxl: add CXL_REGION dependency cxl: avoid returning uninitialized error code cxl/pmem: Fix nvdimm registration races cxl/mem: Fix UAPI command comment cxl/uapi: Tag commands from cxl_query_cmd() ...
2023-02-25LoongArch: ptrace: Expose hardware breakpoints to debuggersQing Zhang1-0/+2
Implement the regset-based ptrace interface that exposes hardware breakpoints to user-space debuggers to query and set instruction and data breakpoints. Signed-off-by: Qing Zhang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-0/+4
Pull rdma updates from Jason Gunthorpe: "Quite a small cycle this time, even with the rc8. I suppose everyone went to sleep over xmas. - Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw, mana - inline CQE support for hns - Have mlx5 display device error codes - Pinned DMABUF support for irdma - Continued rxe cleanups, particularly converting the MRs to use xarray - Improvements to what can be cached in the mlx5 mkey cache" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits) IB/mlx5: Extend debug control for CC parameters IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors IB/hfi1: Fix math bugs in hfi1_can_pin_pages() RDMA/irdma: Add support for dmabuf pin memory regions RDMA/mlx5: Use query_special_contexts for mkeys net/mlx5e: Use query_special_contexts for mkeys net/mlx5: Change define name for 0x100 lkey value net/mlx5: Expose bits for querying special mkeys RDMA/rxe: Fix missing memory barriers in rxe_queue.h RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet RDMA/rxe: Remove rxe_alloc() RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size Subject: RDMA/rxe: Handle zero length rdma iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() RDMA/mlx5: Use rdma_umem_for_each_dma_block() RDMA/umem: Remove unused 'work' member from struct ib_umem RDMA/irdma: Cap MSIX used to online CPUs + 1 RDMA/mlx5: Check reg_create() create for errors RDMA/restrack: Correct spelling RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() ...
2023-02-24Merge tag 'char-misc-6.3-rc1' of ↵Linus Torvalds2-9/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits) scripts/tags.sh: fix incompatibility with PCRE2 firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries mei: lower the log level for non-fatal failed messages mei: bus: disallow driver match while dismantling device misc: vmw_balloon: fix memory leak with using debugfs_lookup() nvmem: stm32: fix OPTEE dependency dt-bindings: nvmem: qfprom: add IPQ8074 compatible nvmem: qcom-spmi-sdam: register at device init time nvmem: rave-sp-eeprm: fix kernel-doc bad line warning nvmem: stm32: detect bsec pta presence for STM32MP15x nvmem: stm32: add OP-TEE support for STM32MP13x nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() nvmem: core: add nvmem_add_one_cell() nvmem: core: drop the removal of the cells in nvmem_add_cells() nvmem: core: move struct nvmem_cell_info to nvmem-provider.h nvmem: core: add an index parameter to the cell of: property: add #nvmem-cell-cells property of: property: make #.*-cells optional for simple props of: base: add of_parse_phandle_with_optional_args() net: add helper eth_addr_add() ...
2023-02-24Merge tag 'tty-6.3-rc1' of ↵Linus Torvalds4-6/+29
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ...
Powered by cgit, Gruvboxed by Blaster4385.