| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The UAPI parts need to be split out from the kernel parts of user_events
now that other parts of the kernel will reference it. Do so by moving
the existing include/linux/user_events.h into
include/uapi/linux/user_events.h.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Beau Belgrave <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Parameter negotiation has been introduced with
commit 92f1f0c3290d ("tty: n_gsm: add parameter negotiation support")
However, means to set individual parameters per DLCI are not yet
implemented. Furthermore, it is currently not possible to keep a DLCI half
open until the user application sets the right parameters for it. This is
required to allow a user application to set its specific parameters before
the underlying link is established. Otherwise, the link is opened and
re-established right afterwards if the user application sets incompatible
parameters. This may be an unexpected behavior for the peer.
Add parameter 'wait_config' to 'gsm_config' to support setups where the
DLCI specific user application sets its specific parameters after open()
and before the link gets fully established. Setting this to zero disables
the user application specific DLCI configuration option.
Add the ioctls 'GSMIOC_GETCONF_DLCI' and 'GSMIOC_SETCONF_DLCI' for the
ldisc and virtual ttys. This gets/sets the DLCI specific parameters and may
trigger a reconnect of the DLCI if incompatible values have been set. Only
the parameters for the DLCI associated with the virtual tty can be set or
retrieved if called on these.
Add remark within the documentation to introduce the new ioctls.
Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Daniel Starke <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Make the broadcast cutoff configurable through netlink. Note
that macvlan is weird because there is no central device for
us to configure (the lowerdev could be anything). So all the
options are duplicated over what could be thousands of child
devices.
IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum
of all child device settings. This is unnecessary as we could
simply store the option in the port device and take the last
child device that gets updated as the value to use.
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add resize_cq verb support for user space CQs. Resize operation for
kernel CQs are not supported now.
Driver should free the current CQ only after user library polls
for all the completions and switch to new CQ. So after the resize_cq
is returned from the driver, user library polls for existing completions
and store it as temporary data. Once library reaps all completions in the
current CQ, it invokes the ibv_cmd_poll_cq to inform the driver about
the resize_cq completion. Adding a check for user CQs in driver's
poll_cq and complete the resize operation for user CQs.
Updating uverbs_cmd_mask with poll_cq to support this.
Signed-off-by: Selvin Xavier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Add a way for various userspace waits to signal urgency.
Signed-off-by: Rob Clark <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/525817/
Link: https://lore.kernel.org/r/[email protected]
|
|
This series adds a deadline hint to fences, so realtime deadlines
such as vblank can be communicated to the fence signaller for power/
frequency management decisions.
This is partially inspired by a trick i915 does, but implemented
via dma-fence for a couple of reasons:
1) To continue to be able to use the atomic helpers
2) To support cases where display and gpu are different drivers
See https://patchwork.freedesktop.org/series/93035/
This does not yet add any UAPI, although this will be needed in
a number of cases:
1) Workloads "ping-ponging" between CPU and GPU, where we don't
want the GPU freq governor to interpret time stalled waiting
for GPU as "idle" time
2) Cases where the compositor is waiting for fences to be signaled
before issuing the atomic ioctl, for example to maintain 60fps
cursor updates even when the GPU is not able to maintain that
framerate.
Signed-off-by: Rob Clark <[email protected]>
|
|
We had all of the internal driver APIs, but not the all important
userspace uABI, in the dma-buf doc. Fix that. And re-arrange the
comments slightly as otherwise the comments for the ioctl nr defines
would not show up.
v2: Fix docs build warning coming from newly including the uabi header
in the docs build
Signed-off-by: Rob Clark <[email protected]>
Acked-by: Pekka Paalanen <[email protected]>
|
|
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Shay Agroskin <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Zero-length arrays as fake flexible arrays are deprecated and we are moving
towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and -fstrict-flex-arrays=3
enabled:
CC drivers/target/target_core_user.o
drivers/target/target_core_user.c: In function ‘queue_cmd_ring’:
drivers/target/target_core_user.c:1096:15: warning: array subscript 0 is outside array bounds of ‘struct iovec[0]’ [-Warray-bounds=]
1096 | iov = &entry->req.iov[0];
| ^~~~~~~~~~~~~~~~~~
In file included from drivers/target/target_core_user.c:31:
./include/uapi/linux/target_core_user.h:122:38: note: while referencing ‘iov’
122 | struct iovec iov[0];
| ^~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/270
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/ZBSchMvTdl7VObKI@work
Reviewed-by: Bodo Stroesser <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
MTL introduces additional OA units dedicated to media use cases. Add
support for programming these OA units by passing the media engine class
and instance parameters.
UMD specific changes for GPUvis support:
https://patchwork.freedesktop.org/patch/522827/?series=114023
https://patchwork.freedesktop.org/patch/522822/?series=114023
https://patchwork.freedesktop.org/patch/522826/?series=114023
https://patchwork.freedesktop.org/patch/522828/?series=114023
https://patchwork.freedesktop.org/patch/522816/?series=114023
https://patchwork.freedesktop.org/patch/522825/?series=114023
v2: (Ashutosh)
- check for IP_VER(12, 70) instead of MTL
- remove PERF_GROUP_OAG comment in mtl_oa_base
- remove oa_buffer.group
- use engine->oa_group->type in engine_supports_oa_format
- remove fw_domains and use FORCEWAKE_ALL
- remove MPES/MPEC comment
- s/xehp/mtl/ in b counter validation function name
- remove engine_supports_oa in __oa_engine_group
- remove warn_ON from __oam_engine_group
- refactor oa_init_groups and oa_init_regs
- assign g->type correctly
- use enum oa_type definition
v3: (Ashutosh)
- Drop oa_unit_functional as engine_supports_oa is enough
v4:
- s/DRM_DEBUG/drm_dbg/
Signed-off-by: Umesh Nerlige Ramappa <[email protected]>
Reviewed-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
One or more engines map to a specific OA unit. All reports from these
engines are captured in the OA buffer managed by this OA unit.
Current i915 OA implementation supports only the OAG unit. OAG primarily
caters to render engine, so i915 OA uses render as the default engine
in the OA implementation. Since there are more OA units on newer
hardware that map to other engines, allow user to pass engine class and
instance to select and program specific OA units.
UMD specific changes for GPUvis support:
https://patchwork.freedesktop.org/patch/522827/?series=114023
https://patchwork.freedesktop.org/patch/522822/?series=114023
https://patchwork.freedesktop.org/patch/522826/?series=114023
https://patchwork.freedesktop.org/patch/522828/?series=114023
https://patchwork.freedesktop.org/patch/522816/?series=114023
https://patchwork.freedesktop.org/patch/522825/?series=114023
v2: (Ashutosh)
- Clarify commit message
- Add drm_dbg
- Clarify uapi description
v3: (Ashutosh)
- Remove irrelevant info from the uapi comment
v4: Ensure engine class:instance is passed together (Ashutosh)
v5: Remove unnecessary quote (Ashutosh)
Signed-off-by: Umesh Nerlige Ramappa <[email protected]>
Reviewed-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted
BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial
list of nontransmitted BSSID profiles should include in the frame
a Reduced Neighbor Report element carrying information for at least the
nontransmitted BSSIDs that are not present in the Multiple BSSID element
carried in that frame.
Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above.
Number of RNR elements must be more than or equal to the number of
MBSSID elements. This attribute can be used only when EMA is enabled.
Userspace is responsible for splitting the RNR into multiple elements such
that each element excludes the non-transmitting profiles already included
in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index.
Each EMA beacon will be generated by adding MBSSID and RNR elements
at the same index. If the userspace provides more RNR elements than the
number of MBSSID elements then these will be added in every EMA beacon.
Signed-off-by: Aloka Dixit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[Johannes: validate elements]
Signed-off-by: Johannes Berg <[email protected]>
|
|
There is only a single user of the UUID uAPI, let's make it
part of that user.
The way it's done is to prevent compilation time breakage for
the user space that does
#include <linux/uuid.h>
In the future MEI user space tools can switch over to use mei_uuid.h.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This series from Or changes default of IB out-of-order feature and
allows to the RDMA users to decide if they need to wait for completion
for all segments or it is enough to wait for last segment completion only.
Thanks
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
By improving the BPF_LINK_UPDATE command of bpf(), it should allow you
to conveniently switch between different struct_ops on a single
bpf_link. This would enable smoother transitions from one struct_ops
to another.
The struct_ops maps passing along with BPF_LINK_UPDATE should have the
BPF_F_LINK flag.
Signed-off-by: Kui-Feng Lee <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Make bpf_link support struct_ops. Previously, struct_ops were always
used alone without any associated links. Upon updating its value, a
struct_ops would be activated automatically. Yet other BPF program
types required to make a bpf_link with their instances before they
could become active. Now, however, you can create an inactive
struct_ops, and create a link to activate it later.
With bpf_links, struct_ops has a behavior similar to other BPF program
types. You can pin/unpin them from their links and the struct_ops will
be deactivated when its link is removed while previously need someone
to delete the value for it to be deactivated.
bpf_links are responsible for registering their associated
struct_ops. You can only use a struct_ops that has the BPF_F_LINK flag
set to create a bpf_link, while a structs without this flag behaves in
the same manner as before and is registered upon updating its value.
The BPF_LINK_TYPE_STRUCT_OPS serves a dual purpose. Not only is it
used to craft the links for BPF struct_ops programs, but also to
create links for BPF struct_ops them-self. Since the links of BPF
struct_ops programs are only used to create trampolines internally,
they are never seen in other contexts. Thus, they can be reused for
struct_ops themself.
To maintain a reference to the map supporting this link, we add
bpf_struct_ops_link as an additional type. The pointer of the map is
RCU and won't be necessary until later in the patchset.
Signed-off-by: Kui-Feng Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
PARPORT_EPP_FAST flag currently uses 32-bit I/O port access for data
read/write (insl/outsl).
Add PARPORT_EPP_FAST_16 and PARPORT_EPP_FAST_8 that use insw/outsw
and insb/outsb (and PARPORT_EPP_FAST_32 as alias for PARPORT_EPP_FAST).
Signed-off-by: Ondrej Zary <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Add feature bit to existing device caps field. EFA supports data polling
of 128 bytes blocks.
The flag indicates that the NIC guarentees that a 128 byte aligned block
is written in order, ie that observing the last 8 bits of the block mean
the prior 127 bytes are also written.
It is useful for "last data polling" acceleration techniques.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Yehuda Yitschak <[email protected]>
Reviewed-by: Yossi Leybovich <[email protected]>
Signed-off-by: Yonatan Nachum <[email protected]>
Signed-off-by: Michael Margolin <[email protected]>
Acked-by: Gal Pressman <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Currently when NL80211_SCAN_FLAG_COLOCATED_6GHZ is set in the scan flags,
in addition to the co-located APs, PSC channels in the 6 GHz band would
also be scanned if the user space has asked for it. In other words, the
scan would happen on PSC channels & co-located 6 GHz channels that were
reported in the RNR IE.
Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZ flag to
reflect the above said behavior.
Signed-off-by: Manikanta Pubbisetty <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
After a couple of years and multiple LTS releases we received a report
that the behavior of O_DIRECTORY | O_CREAT changed starting with v5.7.
On kernels prior to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
had the following semantics:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: create regular file
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: EISDIR
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: create regular file
* d exists and is a regular file: EEXIST
* d exists and is a directory: EEXIST
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
On kernels since to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
have the following semantics:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: ENOTDIR (create regular file)
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: EISDIR
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: ENOTDIR (create regular file)
* d exists and is a regular file: EEXIST
* d exists and is a directory: EEXIST
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
This is a fairly substantial semantic change that userspace didn't
notice until Pedro took the time to deliberately figure out corner
cases. Since no one noticed this breakage we can somewhat safely assume
that O_DIRECTORY | O_CREAT combinations are likely unused.
The v5.7 breakage is especially weird because while ENOTDIR is returned
indicating failure a regular file is actually created. This doesn't make
a lot of sense.
Time was spent finding potential users of this combination. Searching on
codesearch.debian.net showed that codebases often express semantical
expectations about O_DIRECTORY | O_CREAT which are completely contrary
to what our code has done and currently does.
The expectation often is that this particular combination would create
and open a directory. This suggests users who tried to use that
combination would stumble upon the counterintuitive behavior no matter
if pre-v5.7 or post v5.7 and quickly realize neither semantics give them
what they want. For some examples see the code examples in [1] to [3]
and the discussion in [4].
There are various ways to address this issue. The lazy/simple option
would be to restore the pre-v5.7 behavior and to just live with that bug
forever. But since there's a real chance that the O_DIRECTORY | O_CREAT
quirk isn't relied upon we should try to get away with murder(ing bad
semantics) first. If we need to Frankenstein pre-v5.7 behavior later so
be it.
So let's simply return EINVAL categorically for O_DIRECTORY | O_CREAT
combinations. In addition to cleaning up the old bug this also opens up
the possiblity to make that flag combination do something more intuitive
in the future.
Starting with this commit the following semantics apply:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: EINVAL
* d exists and is a regular file: EINVAL
* d exists and is a directory: EINVAL
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: EINVAL
* d exists and is a regular file: EINVAL
* d exists and is a directory: EINVAL
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
One additional note, O_TMPFILE is implemented as:
#define __O_TMPFILE 020000000
#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)
For older kernels it was important to return an explicit error when
O_TMPFILE wasn't supported. So O_TMPFILE requires that O_DIRECTORY is
raised alongside __O_TMPFILE. It also enforced that O_CREAT wasn't
specified. Since O_DIRECTORY | O_CREAT could be used to create a regular
allowing that combination together with __O_TMPFILE would've meant that
false positives were possible, i.e., that a regular file was created
instead of a O_TMPFILE. This could've been used to trick userspace into
thinking it operated on a O_TMPFILE when it wasn't.
Now that we block O_DIRECTORY | O_CREAT completely the check for O_CREAT
in the __O_TMPFILE branch via if ((flags & O_TMPFILE_MASK) != O_TMPFILE)
can be dropped. Instead we can simply check verify that O_DIRECTORY is
raised via if (!(flags & O_DIRECTORY)) and explain this in two comments.
As Aleksa pointed out O_PATH is unaffected by this change since it
always returned EINVAL if O_CREAT was specified - with or without
O_DIRECTORY.
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://sources.debian.org/src/flatpak/1.14.4-1/subprojects/libglnx/glnx-dirfd.c/?hl=324#L324 [1]
Link: https://sources.debian.org/src/flatpak-builder/1.2.3-1/subprojects/libglnx/glnx-shutil.c/?hl=251#L251 [2]
Link: https://sources.debian.org/src/ostree/2022.7-2/libglnx/glnx-dirfd.c/?hl=324#L324 [3]
Link: https://www.openwall.com/lists/oss-security/2014/11/26/14 [4]
Reported-by: Pedro Falcato <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver and accel changes for v6.4:
- uAPI changes:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2. This is to allow the user to perform power
testing/measurements when training different topologies.
- Expose in the INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- Expose in the INFO ioctl a bit-mask of the available rotator engines
in Gaudi2. This is to align with other engines that are already exposed.
- Expose in the INFO ioctl the register's address of the f/w that should
be used to trigger interrupts from within the user's code running in the
compute engines.
- Add a critical-event bit in the eventfd bitmask so the user will know the
event that was received was critical, and a reset will now occur
- Expose in the INFO ioctl two new opcodes to fetch information on h/w and
f/w events. The events recorded are the events that were reported in the
eventfd.
- New features and improvements:
- Add a dedicated interrupt ID in MSI-X in the device to the notification of
an unexpected user-related event in Gaudi2. Handle it in the driver by
reporting this event.
- Allow the user to fetch the device memory current usage even when the
device is undergoing compute-reset (a reset type that only clears the
compute engines).
- Enable graceful reset mechanism for compute-reset. This will give the
user a few seconds before the device is reset. For example, the user can,
during that time, perform certain device operations (dump data for debug)
or close the device in an orderly fashion.
- Align the decoder with the rest of the engines in regard to notification
to the user about interrupts and in regard to performing graceful reset
when needed (instead of immediate reset).
- Add support for assert interrupt from the TPC engine.
- Get the reset type that is necessary to perform per event from the
auto-generated irq_map array.
- Print the specific reason why a device is still in use when notifying to
the user about it (after the user closed the device's FD).
- Move to threaded IRQ when handling interrupts of workload completions.
- Firmware related fixes:
- Fix RAZWI event handler to match newest f/w version.
- Read error cause register in dma core events because the f/w doesn't
do that.
- Increase maximum time to wait for completion of Gaudi2 reset due to f/w
bug.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
i.e increment the device file refcount for any dma-buf that was exported
for that device. This will make sure the compute device release function
won't be called until the user closes all the FDs of the relevant
dma-bufs. Without this change, closing the device's FD before/without
closing the dma-buf's FD would always lead to hard-reset of the device.
- Fix a link in the drm documentation to correctly point to the accel section.
- Compilation warnings cleanups
- Misc bug fixes and code cleanups
Signed-off-by: Dave Airlie <[email protected]>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmQYfcAACgkQZR1NuKta
# 54DB4Af/SuiHZkVXwr+yHPv9El726rz9ZQD7mQtzNmehWGonwAvz15yqocNMUSbF
# JbqE/vrZjvbXrP1Uv5UrlRVdnFHSPV18VnHU4BMS/WOm19SsR6vZ0QOXOoa6/AUb
# w+kF3D//DbFI4/mTGfpH5/pzwu51ti8aVktosPFlHIa8iI8CB4/4IV+ivQ8UW4oK
# HyDRkIvHdRmER7vGOfhwhsr4zdqSlJBYrv3C3Z1dkSYBPW/5ICbiM1UlKycwdYKI
# cajQBSdUQwUCWnI+i8RmSy3kjNO6OE4XRUvTv89F2bQeyK/1rJLG2m2xZR/Ml/o5
# 7Cgvbn0hWZyeqe7OObYiBlSOBSehCA==
# =wclm
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Mar 2023 01:37:36 AEST
# gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780
# gpg: Can't check signature: No public key
From: Oded Gabbay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.
The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.
The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.
Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.
[ bp:
- Massage commit message
- adjust code
- Fix a build issue as
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/oe-kbuild-all/[email protected]
- print exitinfo2 in hex
Tom:
- Correct -EIO exit case. ]
Signed-off-by: Dionna Glaze <[email protected]>
Signed-off-by: Tom Lendacky <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Add logic for setting up and tearing down chained DMA connections.
Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.
Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.
Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.
Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.
Signed-off-by: Jyri Sarha <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The PSP can return a "firmware error" code of -1 in circumstances where
the PSP has not actually been called. To make this protocol unambiguous,
name the value SEV_RET_NO_FW_CALL.
[ bp: Massage a bit. ]
Signed-off-by: Peter Gonda <[email protected]>
Signed-off-by: Dionna Glaze <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/gpu/drm/i915/gem/i915_gem_context.c: In function ‘set_proto_ctx_engines.isra’:
drivers/gpu/drm/i915/gem/i915_gem_context.c:769:41: warning: array subscript n is outside array bounds of ‘struct i915_engine_class_instance[0]’ [-Warray-bounds=]
769 | if (copy_from_user(&ci, &user->engines[n], sizeof(ci))) {
| ^~~~~~~~~~~~~~~~~
./include/uapi/drm/i915_drm.h:2494:43: note: while referencing ‘engines’
2494 | struct i915_engine_class_instance engines[0];
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/271
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZBSu2QsUJy31kjSE@work
|
|
All engine masks are exposed to user, make sure user gets the
correct rotator enabled mask in gaudi2.
Signed-off-by: Ofir Bitton <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
We expose this in order for user applications to know how much dram
is reserved for internal use.
Signed-off-by: Ofir Bitton <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Don't use padX for actual reservedX fields.
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Ofir Bitton <[email protected]>
|
|
We need the mainline fixes in this branch for testing and other
subsystem changes to be based properly on.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.4-2023-03-17:
amdgpu:
- Misc code cleanups
- Documentation fixes
- Make kobj structures const
- Add thermal throttling adjustments for supported APUs
- UMC RAS fixes
- Display reset fixes
- DCN 3.2 fixes
- Freesync fixes
- DC code reorg
- Generalize dmabuf import to work with KFD
- DC DML fixes
- SRIOV fixes
- UVD code cleanups
- IH 4.4.2 updates
- HDP 4.4.2 updates
- SDMA 4.4.2 updates
- PSP 13.0.6 updates
- Add capped/uncapped workload handling for supported APUs
- DCN 3.1.4 updates
- Re-org DC Kconfig
- USB4 fixes
- Reorg DC plane and stream handling
- Register vga_switcheroo for apple-gmux
- SMU 13.0.6 updates
- Fix error checking in read_mm_registers functions for affected families
- VCN 4.0.4 fix
- Drop redundant pci_enable_pcie_error_reporting() call
- RDNA2 SMU OD suspend/resume fix
- Expose additional memory stats via fdinfo
- RAS fixes
- Misc display fixes
- DP MST fixes
- IOMMU regression fix for KFD
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- NBIO fixes
- Misc code cleanups
- Fix possible double free
- Fix possible UAF
radeon:
- iMac fix
UAPI:
- KFD dmabuf export support. Required for importing KFD buffers into GEM contexts and for RDMA P2P support.
Proposed user mode changes: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
These two capabilities are no longer supported, so no
longer define them when compiling the kernel.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
net/wireless/nl80211.c
b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy")
cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping")
https://lore.kernel.org/all/[email protected]
tools/testing/selftests/net/Makefile
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
|
|
Implement MDB control path support, enabling the creation, deletion,
replacement and dumping of MDB entries in a similar fashion to the
bridge driver. Unlike the bridge driver, each entry stores a list of
remote VTEPs to which matched packets need to be replicated to and not a
list of bridge ports.
The motivating use case is the installation of MDB entries by a user
space control plane in response to received EVPN routes. As such, only
allow permanent MDB entries to be installed and do not implement
snooping functionality, avoiding a lot of unnecessary complexity.
Since entries can only be modified by user space under RTNL, use RTNL as
the write lock. Use RCU to ensure that MDB entries and remotes are not
freed while being accessed from the data path during transmission.
In terms of uAPI, reuse the existing MDB netlink interface, but add a
few new attributes to request and response messages:
* IP address of the destination VXLAN tunnel endpoint where the
multicast receivers reside.
* UDP destination port number to use to connect to the remote VXLAN
tunnel endpoint.
* VXLAN VNI Network Identifier to use to connect to the remote VXLAN
tunnel endpoint. Required when Ingress Replication (IR) is used and
the remote VTEP is not a member of originating broadcast domain
(VLAN/VNI) [1].
* Source VNI Network Identifier the MDB entry belongs to. Used only when
the VXLAN device is in external mode.
* Interface index of the outgoing interface to reach the remote VXLAN
tunnel endpoint. This is required when the underlay destination IP is
multicast (P2MP), as the multicast routing tables are not consulted.
All the new attributes are added under the 'MDBA_SET_ENTRY_ATTRS' nest
which is strictly validated by the bridge driver, thereby automatically
rejecting the new attributes.
[1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-3.2.2
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <[email protected]>
Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The KVM_GET_NR_MMU_PAGES ioctl is quite questionable on 64-bit hosts
since it fails to return the full 64 bits of the value that can be
set with the corresponding KVM_SET_NR_MMU_PAGES call. Its "long" return
value is truncated into an "int" in the kvm_arch_vm_ioctl() function.
Since this ioctl also never has been used by userspace applications
(QEMU, Google's internal VMM, kvmtool and CrosVM have been checked),
it's likely the best if we remove this badly designed ioctl before
anybody really tries to use it.
Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The support of Intel Speed Select Technology - Turbo Frequency (SST-TF)
feature enables the ability to set different “All core turbo ratio
limits” to cores based on the priority. By using this feature, some cores
can be configured to get higher turbo frequency by designating them as
high priority at the cost of lower or no turbo frequency on the low
priority cores.
One new IOCTLs are added:
ISST_IF_GET_TURBO_FREQ_INFO : Get information about turbo frequency
buckets
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST-TF operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Pragya Tanwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
This Intel Speed Select Technology - Performance Profile (SST-PP) feature
introduces a mechanism that allows multiple optimized performance profiles
per system. Each profile defines a set of CPUs that need to be online and
rest offline to sustain a guaranteed base frequency.
Five new IOCTLs are added:
ISST_IF_PERF_LEVELS : Get number of performance levels
ISST_IF_PERF_SET_LEVEL : Set to a new performance level
ISST_IF_PERF_SET_FEATURE : Activate SST-BF/SST-TF for a performance level
ISST_IF_GET_PERF_LEVEL_INFO : Get parameters for a performance level
ISST_IF_GET_PERF_LEVEL_CPU_MASK : Get CPU mask for a performance level
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST PP operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Pragya Tanwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Intel Speed Select Technology Core Power (SST-CP) is an interface that
allows users to define per core priority. This defines a mechanism to
distribute power among cores when there is a power constrained
scenario. This defines a class of service (CLOS) configuration.
Three new IOCTLs are added:
ISST_IF_CORE_POWER_STATE : Enable/Disable SST-CP
ISST_IF_CLOS_PARAM : Configure CLOS parameters
ISST_IF_CLOS_ASSOC : Associate CPUs to a CLOS
To associate CPUs to CLOS, either Linux CPU numbering or PUNIT numbering
scheme can be used, using parameter punit_cpu_map (1: for PUNIT numbering
0 for Linux CPU number).
There is no change to IOCTL to get PUNIT CPU number for a CPU.
Introduce get_instance() function, which is used by majority of IOCTLs
processing to convert a socket and power domain to
tpmi_per_power_domain_info * instance. This instance has all the MMIO
offsets stored to read a particular field.
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST CP operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Pragya Tanwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Enumerate TPMI SST driver and create basic framework to add more
features.
The basic user space interface is still same as the legacy using
/dev/isst_interface. Users of "intel-speed-select" utility should
be able to use same commands as prior gens without being aware
of new underlying hardware interface.
TPMI SST driver enumerates on device "intel_vsec.tpmi-sst". Since there
can be multiple instances and there is one common SST core, split
implementation into two parts: A common core part and an enumeration
part. The enumeration driver is loaded for each device instance and
register with the TPMI SST core driver.
On very first enumeration the TPMI SST core driver register with SST
core driver to get IOCTL callbacks. The api_version is incremented
for IOCTL ISST_IF_GET_PLATFORM_INFO, so that user space can issue
new IOCTLs.
Each TPMI package contains multiple power domains. Each power domain
has its own set of SST controls. For each domain map the MMIO memory
and update per domain struct tpmi_per_power_domain_info. This information
will be used to implement other SST interfaces.
Implement first IOCTL commands to get number of TPMI SST instances
and instance mask as some of the power domains may not have any
SST controls.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Pragya Tanwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
The user might want to stall/resume engines to perform power testing
for various scenarios. Because our current
HL_CS_FLAGS_ENGINE_CORE_COMMAND command only handles the engines' cores,
we need to add another opcode for handling entire engine and not just
its core.
The user supplies an array, where each entry holds the engine's ID and
the command to send to the engine. The size of the array is limited
by the number of engines in the ASIC (only Gaudi2 is currently
supported).
Signed-off-by: Koby Elbaz <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
In order to allow TPC engines to raise an assert, we must expose
the relevant MSIX interrupt to the user so he will configure the engine
correctly. In addition, we implement the corresponding interrupt
handler that will notify the user upon such an event.
Signed-off-by: Ofir Bitton <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
|
|
In order for engine cores to raise interrupts towards FW, They need
to know which register the event data should be written to.
Hence, we forward the relevant scratchpad register received during
dynamic regs handshake with FW.
Signed-off-by: Ofir Bitton <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
|
|
Enhance the existing user notifications by adding a HW and FW critical
event bits to be used when a HW or FW event occur that requires
both SW abort and hard-resetting the chip.
Signed-off-by: Moti Haimovski <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
|
|
Merge series from Peter Ujfalusi <[email protected]>:
The modules in IPC4 can have multiple 'pins' on their input and output
and these pins can receive or output audio in different formats.
Currently we assume that all pins are using the same format which is a
limitation that needs to be lifted in order to support more complex
components.
This series will extend and rework the format handling to allow
different formats on pins.
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and samples in the bpf code still refer to this older
debugfs path, so let's update them to avoid confusion. There are a few
spots where the bpf code explicitly checks both tracefs and debugfs
(tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
those alone so that the tools can continue to work with both paths.
Signed-off-by: Ross Zwisler <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Virtio spec introduced a feature VIRTIO_NET_F_GUEST_HDRLEN which when
set implicates that device benefits from knowing the exact size
of the header. For compatibility, to signal to the device that
the header is reliable driver also needs to set this feature.
Without this feature set by driver, device has to figure
out the header size itself.
Quoting the original virtio spec:
"hdr_len is a hint to the device as to how much of the header needs to
be kept to copy into each packet"
"a hint" might not be clear for the reader what does it mean, if it is
"maybe like that" of "exactly like that". This feature just makes it
crystal clear and let the device count on the hdr_len being filled up
by the exact length of header.
Also note the spec already has following note about hdr_len:
"Due to various bugs in implementations, this field is not useful
as a guarantee of the transport header size."
Without this feature the device needs to parse the header in core
data path handling. Accurate information helps the device to eliminate
such header parsing and directly use the hardware accelerators
for GSO operation.
virtio_net_hdr_from_skb() fills up hdr_len to skb_headlen(skb).
The driver already complies to fill the correct value. Introduce the
feature and advertise it.
Note that virtio spec also includes following note for device
implementation:
"Caution should be taken by the implementation so as to prevent
a malicious driver from attacking the device by setting
an incorrect hdr_len."
There is a plan to support this feature in our emulated device.
A device of SolidRun offers this feature bit. They claim this feature
will save the device a few cycles for every GSO packet.
Link: https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-230006x3
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Reviewed-by: Alvaro Karsz <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In preparation for handling processing modules with different
input/output pin counts, introduce two new tokens for input/output
audio format counts. Use these token values to parse all the available
audio formats from topology.
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|