| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull kvm fixes from Paolo Bonzini:
"s390:
- Fix failure to start guests with kvm.use_gisa=0
- Panic if (un)share fails to maintain security.
ARM:
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
x86:
- Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
- Fix smatch issues
- Small cleanups
- Make x2APIC ID 100% readonly
- Fix typo in uapi constant
Generic:
- Use synchronize_srcu_expedited() on irqfd shutdown"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: SEV: uapi: fix typo in SEV_RET_INVALID_CONFIG
KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
KVM: eventfd: Use synchronize_srcu_expedited() on shutdown
KVM: selftests: Add a testcase to verify x2APIC is fully readonly
KVM: x86: Make x2APIC ID 100% readonly
KVM: x86: Use this_cpu_ptr() instead of per_cpu_ptr(smp_processor_id())
KVM: x86: hyper-v: Remove unused inline function kvm_hv_free_pa_page()
KVM: SVM: Fix an error code in sev_gmem_post_populate()
KVM: SVM: Fix uninitialized variable bug
KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
KVM: arm64: Tidying up PAuth code in KVM
KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
s390/uv: Panic for set and remove shared access UVC errors
KVM: s390: fix validity interception issue when gisa is switched off
docs: KVM: Fix register ID of SPSR_FIQ
KVM: arm64: vgic: fix unexpected unlock sparse warnings
KVM: arm64: fix kdoc warnings in W=1 builds
KVM: arm64: fix override-init warnings in W=1 builds
...
|
|
"INVALID" is misspelt in "SEV_RET_INAVLID_CONFIG". Since this is part of
the UAPI, keep the current definition and add a new one with the fix.
Fix-suggested-by: Marc Zyngier <[email protected]>
Signed-off-by: Amit Shah <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- Fix the name of file lease slab cache. When file leases were split
out of file locks the name of the file lock slab cache was used for
the file leases slab cache as well.
- Fix a type in take_fd() helper.
- Fix infinite directory iteration for stable offsets in tmpfs.
- When the icache is pruned all reclaimable inodes are marked with
I_FREEING and other processes that try to lookup such inodes will
block.
But some filesystems like ext4 can trigger lookups in their inode
evict callback causing deadlocks. Ext4 does such lookups if the
ea_inode feature is used whereby a separate inode may be used to
store xattrs.
Introduce I_LRU_ISOLATING which pins the inode while its pages are
reclaimed. This avoids inode deletion during inode_lru_isolate()
avoiding the deadlock and evict is made to wait until
I_LRU_ISOLATING is done.
netfs:
- Fault in smaller chunks for non-large folio mappings for
filesystems that haven't been converted to large folios yet.
- Fix the CONFIG_NETFS_DEBUG config option. The config option was
renamed a short while ago and that introduced two minor issues.
First, it depended on CONFIG_NETFS whereas it wants to depend on
CONFIG_NETFS_SUPPORT. The former doesn't exist, while the latter
does. Second, the documentation for the config option wasn't fixed
up.
- Revert the removal of the PG_private_2 writeback flag as ceph is
using it and fix how that flag is handled in netfs.
- Fix DIO reads on 9p. A program watching a file on a 9p mount
wouldn't see any changes in the size of the file being exported by
the server if the file was changed directly in the source
filesystem. Fix this by attempting to read the full size specified
when a DIO read is requested.
- Fix a NULL pointer dereference bug due to a data race where a
cachefiles cookies was retired even though it was still in use.
Check the cookie's n_accesses counter before discarding it.
nsfs:
- Fix ioctl declaration for NS_GET_MNTNS_ID from _IO() to _IOR() as
the kernel is writing to userspace.
pidfs:
- Prevent the creation of pidfds for kthreads until we have a
use-case for it and we know the semantics we want. It also confuses
userspace why they can get pidfds for kthreads.
squashfs:
- Fix an unitialized value bug reported by KMSAN caused by a
corrupted symbolic link size read from disk. Check that the
symbolic link size is not larger than expected"
* tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Squashfs: sanity check symbolic link size
9p: Fix DIO read through netfs
vfs: Don't evict inode under the inode lru traversing context
netfs: Fix handling of USE_PGPRIV2 and WRITE_TO_CACHE flags
netfs, ceph: Revert "netfs: Remove deprecated use of PG_private_2 as a second writeback flag"
file: fix typo in take_fd() comment
pidfd: prevent creation of pidfds for kthreads
netfs: clean up after renaming FSCACHE_DEBUG config
libfs: fix infinite directory reads for offset dir
nsfs: fix ioctl declaration
fs/netfs/fscache_cookie: add missing "n_accesses" check
filelock: fix name of file_lease slab cache
netfs: Fault in smaller chunks for non-large folio mappings
|
|
Add support to the rkisp1 driver for the companding block that exists on
the i.MX8MP version of the ISP. This requires usage of the new
extensible parameters format, and showcases how the format allows for
extensions without breaking backward compatibility.
Signed-off-by: Paul Elder <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Reviewed-by: Paul Elder <[email protected]>
Signed-off-by: Jacopo Mondi <[email protected]>
Tested-by: Kieran Bingham <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
|
|
Add the ability for the USB FunctionFS (FFS) gadget driver to be able
to create Device Firmware Upgrade (DFU) functional descriptors. [1]
This patch allows implementation of DFU in userspace using the
FFS gadget. The DFU protocol uses the control pipe (ep0) for all
messaging so only the addition of the DFU functional descriptor
is needed in the kernel driver.
The DFU functional descriptor is written to the ep0 file along with
any other descriptors during FFS setup. DFU requires an interface
descriptor followed by the DFU functional descriptor.
This patch includes documentation of the added descriptor for DFU
and conversion of some existing documentation to kernel-doc format
so that it can be included in the generated docs.
An implementation of DFU 1.1 that implements just the runtime descriptor
using the FunctionFS gadget (with rebooting into u-boot for DFU mode)
has been tested on an i.MX8 Nano.
An implementation of DFU 1.1 that implements both runtime and DFU mode
using the FunctionFS gadget has been tested on Xilinx Zynq UltraScale+.
Note that for the best performance of firmware update file transfers, the
userspace program should respond as quick as possible to the setup packets.
[1] https://www.usb.org/sites/default/files/DFU_1.1.pdf
Signed-off-by: David Sands <[email protected]>
Co-developed-by: Chris Wulff <[email protected]>
Signed-off-by: Chris Wulff <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Link: https://patch.msgid.link/483e2fcf4beb0d9135d62e7d27b46fa2685479d4.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are many unpatched kernel versions out there that do not initialize
the reserved fields of struct nexthop_grp. The issue with that is that if
those fields were to be used for some end (i.e. stop being reserved), old
kernels would still keep sending random data through the field, and a new
userspace could not rely on the value.
In this patch, use the existing NHA_OP_FLAGS, which is currently inbound
only, to carry flags back to the userspace. Add a flag to indicate that the
reserved fields in struct nexthop_grp are zeroed before dumping. This is
reliant on the actual fix from commit 6d745cd0e972 ("net: nexthop:
Initialize all fields in dumped nexthops").
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Link: https://patch.msgid.link/21037748d4f9d8ff486151f4c09083bcf12d5df8.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The kernel is writing an object of type __u64, so the ioctl has to be
defined to _IOR(NSIO, 0x5, __u64) instead of _IO(NSIO, 0x5).
Reported-by: Dmitry V. Levin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Applications may want to deal with dynamic RSS contexts only.
So dumping context 0 will be counter-productive for them.
Support starting the dump from a given context ID.
Alternative would be to implement a dump flag to skip just
context 0, not sure which is better...
Reviewed-by: Edward Cree <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Get drm-misc-next to the state of v6.11-rc2.
Signed-off-by: Thomas Zimmermann <[email protected]>
|
|
The rkisp1 driver stores ISP configuration parameters in the fixed
rkisp1_params_cfg structure. As the members of the structure are part of
the userspace API, the structure layout is immutable and cannot be
extended further. Introducing new parameters or modifying the existing
ones would change the buffer layout and cause breakages in existing
applications.
The allow for future extensions to the ISP parameters, introduce a new
extensible parameters format, with a new format 4CC. Document usage of
the new format in the rkisp1 admin guide.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Daniel Scally <[email protected]>
Reviewed-by: Paul Elder <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Tested-by: Kieran Bingham <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
|
|
Add to the rkisp1-config.h header data types and documentation of
the extensible parameters format.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Paul Elder <[email protected]>
Tested-by: Kieran Bingham <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
|
|
This patch takes care of the following warnings during documentation
compiling:
./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'width' not described in 'drm_plane_size_hint'
./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'height' not described in 'drm_plane_size_hint'
Signed-off-by: Mohammed Anees <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Introduce the 'GET_DATA_DIRECT_SYSFS_PATH' ioctl to return the sysfs
path of the affiliated 'data direct' device for a given device.
Signed-off-by: Yishai Hadas <[email protected]>
Link: https://patch.msgid.link/403745463e0ef52adbef681ff09aa6a29a756352.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Add support for DMABUF MR registrations with Data-direct device.
Upon userspace calling to register a DMABUF MR with the data direct bit
set, the below algorithm will be followed.
1) Obtain a pinned DMABUF umem from the IB core using the user input
parameters (FD, offset, length) and the DMA PF device. The DMA PF
device is needed to allow the IOMMU to enable the DMA PF to access the
user buffer over PCI.
2) Create a KSM MKEY by setting its entries according to the user buffer
VA to IOVA mapping, with the MKEY being the data direct device-crossed
MKEY. This KSM MKEY is umrable and will be used as part of the MR cache.
The PD for creating it is the internal device 'data direct' kernel one.
3) Create a crossing MKEY that points to the KSM MKEY using the crossing
access mode.
4) Manage the KSM MKEY by adding it to a list of 'data direct' MKEYs
managed on the mlx5_ib device.
5) Return the crossing MKEY to the user, created with its supplied PD.
Upon DMA PF unbind flow, the driver will revoke the KSM entries.
The final deregistration will occur under the hood once the application
deregisters its MKEY.
Notes:
- This version supports only the PINNED UMEM mode, so there is no
dependency on ODP.
- The IOVA supplied by the application must be system page aligned due to
HW translations of KSM.
- The crossing MKEY will not be umrable or part of the MR cache, as we
cannot change its crossed (i.e. KSM) MKEY over UMR.
Signed-off-by: Yishai Hadas <[email protected]>
Link: https://patch.msgid.link/1f99d8020ed540d9702b9e2252a145a439609ba6.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Pull control lookup optimization changes.
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Christian Brauner <[email protected]> says:
Recently, we added the ability to list mounts in other mount namespaces
and the ability to retrieve namespace file descriptors without having to
go through procfs by deriving them from pidfds.
This extends nsfs in two ways:
(1) Add the ability to retrieve information about a mount namespace via
NS_MNT_GET_INFO. This will return the mount namespace id and the
number of mounts currently in the mount namespace. The number of
mounts can be used to size the buffer that needs to be used for
listmount() and is in general useful without having to actually
iterate through all the mounts.
The structure is extensible.
(2) Add the ability to iterate through all mount namespaces over which
the caller holds privilege returning the file descriptor for the
next or previous mount namespace.
To retrieve a mount namespace the caller must be privileged wrt to
it's owning user namespace. This means that PID 1 on the host can
list all mounts in all mount namespaces or that a container can list
all mounts of its nested containers.
Optionally pass a structure for NS_MNT_GET_INFO with
NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount
namespace in one go.
(1) and (2) can be implemented for other namespace types easily.
Together with recent api additions this means one can iterate through
all mounts in all mount namespaces without ever touching procfs. Here's
a sample program list_all_mounts_everywhere.c:
// SPDX-License-Identifier: GPL-2.0-or-later
#define _GNU_SOURCE
#include <asm/unistd.h>
#include <assert.h>
#include <errno.h>
#include <fcntl.h>
#include <getopt.h>
#include <linux/stat.h>
#include <sched.h>
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/param.h>
#include <sys/pidfd.h>
#include <sys/stat.h>
#include <sys/statfs.h>
#define die_errno(format, ...) \
do { \
fprintf(stderr, "%m | %s: %d: %s: " format "\n", __FILE__, \
__LINE__, __func__, ##__VA_ARGS__); \
exit(EXIT_FAILURE); \
} while (0)
/* Get the id for a mount namespace */
#define NS_GET_MNTNS_ID _IO(0xb7, 0x5)
/* Get next mount namespace. */
struct mnt_ns_info {
__u32 size;
__u32 nr_mounts;
__u64 mnt_ns_id;
};
#define MNT_NS_INFO_SIZE_VER0 16 /* size of first published struct */
/* Get information about namespace. */
#define NS_MNT_GET_INFO _IOR(0xb7, 10, struct mnt_ns_info)
/* Get next namespace. */
#define NS_MNT_GET_NEXT _IOR(0xb7, 11, struct mnt_ns_info)
/* Get previous namespace. */
#define NS_MNT_GET_PREV _IOR(0xb7, 12, struct mnt_ns_info)
#define PIDFD_GET_MNT_NAMESPACE _IO(0xFF, 3)
#define STATX_MNT_ID_UNIQUE 0x00004000U /* Want/got extended stx_mount_id */
#define __NR_listmount 458
#define __NR_statmount 457
/*
* @mask bits for statmount(2)
*/
#define STATMOUNT_SB_BASIC 0x00000001U /* Want/got sb_... */
#define STATMOUNT_MNT_BASIC 0x00000002U /* Want/got mnt_... */
#define STATMOUNT_PROPAGATE_FROM 0x00000004U /* Want/got propagate_from */
#define STATMOUNT_MNT_ROOT 0x00000008U /* Want/got mnt_root */
#define STATMOUNT_MNT_POINT 0x00000010U /* Want/got mnt_point */
#define STATMOUNT_FS_TYPE 0x00000020U /* Want/got fs_type */
#define STATMOUNT_MNT_NS_ID 0x00000040U /* Want/got mnt_ns_id */
#define STATMOUNT_MNT_OPTS 0x00000080U /* Want/got mnt_opts */
struct statmount {
__u32 size; /* Total size, including strings */
__u32 mnt_opts;
__u64 mask; /* What results were written */
__u32 sb_dev_major; /* Device ID */
__u32 sb_dev_minor;
__u64 sb_magic; /* ..._SUPER_MAGIC */
__u32 sb_flags; /* SB_{RDONLY,SYNCHRONOUS,DIRSYNC,LAZYTIME} */
__u32 fs_type; /* [str] Filesystem type */
__u64 mnt_id; /* Unique ID of mount */
__u64 mnt_parent_id; /* Unique ID of parent (for root == mnt_id) */
__u32 mnt_id_old; /* Reused IDs used in proc/.../mountinfo */
__u32 mnt_parent_id_old;
__u64 mnt_attr; /* MOUNT_ATTR_... */
__u64 mnt_propagation; /* MS_{SHARED,SLAVE,PRIVATE,UNBINDABLE} */
__u64 mnt_peer_group; /* ID of shared peer group */
__u64 mnt_master; /* Mount receives propagation from this ID */
__u64 propagate_from; /* Propagation from in current namespace */
__u32 mnt_root; /* [str] Root of mount relative to root of fs */
__u32 mnt_point; /* [str] Mountpoint relative to current root */
__u64 mnt_ns_id;
__u64 __spare2[49];
char str[]; /* Variable size part containing strings */
};
struct mnt_id_req {
__u32 size;
__u32 spare;
__u64 mnt_id;
__u64 param;
__u64 mnt_ns_id;
};
#define MNT_ID_REQ_SIZE_VER1 32 /* sizeof second published struct */
#define LSMT_ROOT 0xffffffffffffffff /* root mount */
static int __statmount(__u64 mnt_id, __u64 mnt_ns_id, __u64 mask,
struct statmount *stmnt, size_t bufsize, unsigned int flags)
{
struct mnt_id_req req = {
.size = MNT_ID_REQ_SIZE_VER1,
.mnt_id = mnt_id,
.param = mask,
.mnt_ns_id = mnt_ns_id,
};
return syscall(__NR_statmount, &req, stmnt, bufsize, flags);
}
static struct statmount *sys_statmount(__u64 mnt_id, __u64 mnt_ns_id,
__u64 mask, unsigned int flags)
{
size_t bufsize = 1 << 15;
struct statmount *stmnt = NULL, *tmp = NULL;
int ret;
for (;;) {
tmp = realloc(stmnt, bufsize);
if (!tmp)
goto out;
stmnt = tmp;
ret = __statmount(mnt_id, mnt_ns_id, mask, stmnt, bufsize, flags);
if (!ret)
return stmnt;
if (errno != EOVERFLOW)
goto out;
bufsize <<= 1;
if (bufsize >= UINT_MAX / 2)
goto out;
}
out:
free(stmnt);
printf("statmount failed");
return NULL;
}
static ssize_t sys_listmount(__u64 mnt_id, __u64 last_mnt_id, __u64 mnt_ns_id,
__u64 list[], size_t num, unsigned int flags)
{
struct mnt_id_req req = {
.size = MNT_ID_REQ_SIZE_VER1,
.mnt_id = mnt_id,
.param = last_mnt_id,
.mnt_ns_id = mnt_ns_id,
};
return syscall(__NR_listmount, &req, list, num, flags);
}
int main(int argc, char *argv[])
{
#define LISTMNT_BUFFER 10
__u64 list[LISTMNT_BUFFER], last_mnt_id = 0;
int ret, pidfd, fd_mntns;
struct mnt_ns_info info = {};
pidfd = pidfd_open(getpid(), 0);
if (pidfd < 0)
die_errno("pidfd_open failed");
fd_mntns = ioctl(pidfd, PIDFD_GET_MNT_NAMESPACE, 0);
if (fd_mntns < 0)
die_errno("ioctl(PIDFD_GET_MNT_NAMESPACE) failed");
ret = ioctl(fd_mntns, NS_MNT_GET_INFO, &info);
if (ret < 0)
die_errno("ioctl(NS_GET_MNTNS_ID) failed");
printf("Listing %u mounts for mount namespace %d:%llu\n", info.nr_mounts, fd_mntns, info.mnt_ns_id);
for (;;) {
ssize_t nr_mounts;
next:
nr_mounts = sys_listmount(LSMT_ROOT, last_mnt_id, info.mnt_ns_id, list, LISTMNT_BUFFER, 0);
if (nr_mounts <= 0) {
printf("Finished listing mounts for mount namespace %d:%llu\n\n", fd_mntns, info.mnt_ns_id);
ret = ioctl(fd_mntns, NS_MNT_GET_NEXT, 0);
if (ret < 0)
die_errno("ioctl(NS_MNT_GET_NEXT) failed");
close(ret);
ret = ioctl(fd_mntns, NS_MNT_GET_NEXT, &info);
if (ret < 0) {
if (errno == ENOENT) {
printf("Finished listing all mount namespaces\n");
exit(0);
}
die_errno("ioctl(NS_MNT_GET_NEXT) failed");
}
close(fd_mntns);
fd_mntns = ret;
last_mnt_id = 0;
printf("Listing %u mounts for mount namespace %d:%llu\n", info.nr_mounts, fd_mntns, info.mnt_ns_id);
goto next;
}
for (size_t cur = 0; cur < nr_mounts; cur++) {
struct statmount *stmnt;
last_mnt_id = list[cur];
stmnt = sys_statmount(last_mnt_id, info.mnt_ns_id,
STATMOUNT_SB_BASIC |
STATMOUNT_MNT_BASIC |
STATMOUNT_MNT_ROOT |
STATMOUNT_MNT_POINT |
STATMOUNT_MNT_NS_ID |
STATMOUNT_MNT_OPTS |
STATMOUNT_FS_TYPE,
0);
if (!stmnt) {
printf("Failed to statmount(%llu) in mount namespace(%llu)\n", last_mnt_id, info.mnt_ns_id);
continue;
}
printf("mnt_id(%u/%llu) | mnt_parent_id(%u/%llu): %s @ %s ==> %s with options: %s\n",
stmnt->mnt_id_old, stmnt->mnt_id,
stmnt->mnt_parent_id_old, stmnt->mnt_parent_id,
stmnt->str + stmnt->fs_type,
stmnt->str + stmnt->mnt_root,
stmnt->str + stmnt->mnt_point,
stmnt->str + stmnt->mnt_opts);
free(stmnt);
}
}
exit(0);
}
* patches from https://lore.kernel.org/r/[email protected]:
nsfs: iterate through mount namespaces
file: add fput() cleanup helper
fs: add put_mnt_ns() cleanup helper
fs: allow mount namespace fd
Signed-off-by: Christian Brauner <[email protected]>
|
|
It is already possible to list mounts in other mount namespaces and to
retrieve namespace file descriptors without having to go through procfs
by deriving them from pidfds.
Augment these abilities by adding the ability to retrieve information
about a mount namespace via NS_MNT_GET_INFO. This will return the mount
namespace id and the number of mounts currently in the mount namespace.
The number of mounts can be used to size the buffer that needs to be
used for listmount() and is in general useful without having to actually
iterate through all the mounts. The structure is extensible.
And add the ability to iterate through all mount namespaces over which
the caller holds privilege returning the file descriptor for the next or
previous mount namespace.
To retrieve a mount namespace the caller must be privileged wrt to it's
owning user namespace. This means that PID 1 on the host can list all
mounts in all mount namespaces or that a container can list all mounts
of its nested containers.
Optionally pass a structure for NS_MNT_GET_INFO with
NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount namespace
in one go. Both ioctls can be implemented for other namespace types
easily.
Together with recent api additions this means one can iterate through
all mounts in all mount namespaces without ever touching procfs.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
- remove Power Saving Policy property
Core Changes:
- update connector documentation
CI:
- add tests for mediatek, meson, rockchip
Driver Changes:
amdgpu:
- revert support for Power Saving Policy property
bridge:
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
mgag200:
- transparently support BMC outputs
omapdrm:
- use common helper for_each_endpoint_of_node()
panel:
- panel-edp: fix name for HKC MB116AN01
vkms:
- clean up endianess warnings
Signed-off-by: Daniel Vetter <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently the only opportunity to set sock ops flags dictating
which callbacks fire for a socket is from within a TCP-BPF sockops
program. This is problematic if the connection is already set up
as there is no further chance to specify callbacks for that socket.
Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_setsockopt() and bpf_getsockopt()
to allow users to specify callbacks later, either via an iterator
over sockets or via a socket-specific program triggered by a
setsockopt() on the socket.
Previous discussion on this here [1].
[1] https://lore.kernel.org/bpf/[email protected]/
Signed-off-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
virtio:
- Define DRM capset
Cross-subsystem Changes:
dma-buf:
- heaps: Clean up documentation
printk:
- Pass description to kmsg_dump()
Core Changes:
CI:
- Update IGT tests
- Point upstream repo to GitLab instance
modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
panic:
- Avoid build-time interference with framebuffer console
docs:
- Document Colorspace property
scheduler:
- Remove full_recover from drm_sched_start
TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
Driver Changes:
amdgpu:
- Support Power Saving Policy connector property
ast:
- astdp: Support AST2600 with VGA; Clean up HPD
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
gma500:
- Update i2c terminology
ivpu:
- Add MODULE_FIRMWARE()
lcdif:
- Fix pixel clock
loongson:
- Use GEM refcount over TTM's
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
sti:
- Fix module owner
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- Call drm_atomic_helper_shutdown()
v3d:
- Clean up perfmon
vkms:
- Clean up
Signed-off-by: Daniel Vetter <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The cec_msg_set_reply_to() helper function never zeroed the
struct cec_msg flags field, this can cause unexpected behavior
if flags was uninitialized to begin with.
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: 0dbacebede1e ("[media] cec: move the CEC framework out of staging and to media")
Cc: <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The UMP v1.1 spec says in the section 6.2.1:
"If a UMP Endpoint declares MIDI 2.0 Protocol but a Function Block
represents a MIDI 1.0 connection, then may optionally be used for
messages to/from that Function Block."
It implies that the driver can (and should) keep MIDI 1.0 CVM
exceptionally for those FBs even if UMP Endpoint is running in MIDI
2.0 protocol, and the current driver lacks of it.
This patch extends the sequencer port info to indicate a MIDI 1.0
port, and tries to send/receive MIDI 1.0 CVM as is when this port is
the source or sink. The sequencer port flag is set by the driver at
parsing FBs and GTBs although application can set it to its own
user-space clients, too.
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
drm-xe-next for 6.12
UAPI Changes:
- Rename xe perf layer as xe observation layer, but was
also made available via fixes to previous verison (Ashutosh)
- Use write-back caching mode for system memory on DGFX,
but was also mad available via fixes to previous version (Thomas)
- Expose SIMD16 EU mask in topology query for userspace to know
the type of EU, as available in PVC, Lunar Lake and Battlemage
(Lucas)
- Return ENOBUFS instead of ENOMEM in vm_bind if failure is tied
to an array of binds (Matthew Brost)
Driver Changes:
- Log cleanup moving messages to debug priority (Michal Wajdeczko)
- Add timeout to fences to adhere to dma_buf rules (Matthew Brost)
- Rename old engine nomenclature to exec_queue (Matthew Brost)
- Convert multiple bind ops to 1 job (Matthew Brost)
- Add error injection for vm bind to help testing error path
(Matthew Brost)
- Fix error handling in page table to propagate correctly
to userspace (Matthew Brost)
- Re-organize and cleanup SR-IOV related registers (Michal Wajdeczko)
- Make the device write barrier compatible with VF (Michal Wajdeczko)
- New display workarounds for Battlemage (Matthew Auld)
- New media workarounds for Lunar Lake and Battlemage (Ngai-Mint Kwan)
- New graphics workarounds for Lunar Lake (Bommu Krishnaiah)
- Tracepoint updates (Matthew Brost, Nirmoy Das)
- Cleanup the header generation for OOB workarounds (Lucas De Marchi)
- Fix leaking HDCP-related object (Nirmoy Das)
- Serialize L2 flushes to avoid races (Tejas Upadhyay)
- Log pid and comm on job timeout (José Roberto de Souza)
- Simplify boilerplate code for live kunit (Michal Wajdeczko)
- Improve kunit skips for live kunit (Michal Wajdeczko)
- Fix xe_sync cleanup when handling xe_exec ioctl (Ashutosh Dixit)
- Limit fair VF LMEM provisioning (Michal Wajdeczko)
- New workaround to fence mmio writes in Lunar Lake (Tejas Upadhyay)
- Warn on writes inaccessible register in VF (Michal Wajdeczko)
- Fix register lookup in VF (Michal Wajdeczko)
- Add GSC support for Battlemage (Alexander Usyskin)
- Fix wedging only the GT in which timeout occurred (Matthew Brost)
- Block device suspend when wedging (Matthew Brost)
- Handle compression and migration changes for Battlemage
(Akshata Jahagirdar)
- Limit access of stolen memory for Lunar Lake (Uma Shankar)
- Fail invalid addresses during user fence creation (Matthew Brost)
- Refcount xe_file to safely and accurately store fdinfo stats
(Umesh Nerlige Ramappa)
- Cleanup and fix PM reference for TLB invalidation code
(Matthew Brost)
- Fix PM reference handling when communicating with GuC (Matthew Brost)
- Add new BO flag for 2 MiB alignement and use in VF (Michal Wajdeczko)
- Simplify MMIO setup for multi-tile platforms (Lucas De Marchi)
- Add check for uninitialized access to OOB workarounds
(Lucas De Marchi)
- New GSC and HuC firmware blobs for Lunar Lake and Battlemage
(Daniele Ceraolo Spurio)
- Unify mmio wait logic (Gustavo Sousa)
- Fix off-by-one when processing RTP rules (Lucas De Marchi)
- Future-proof migrate logic with compressed PAT flag (Matt Roper)
- Add WA kunit tests for Battlemage (Lucas De Marchi)
- Test active tracking for workaorunds with kunit (Lucas De Marchi)
- Add kunit tests for RTP with no actions (Lucas De Marchi)
- Unify parse of OR rules in RTP (Lucas De Marchi)
- Add performance tuning for Battlemage (Sai Teja Pottumuttu)
- Make bit masks unsigned (Geert Uytterhoeven)
Signed-off-by: Dave Airlie <[email protected]>
From: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/k7xuktfav4zmtxxjr77glu2hszypvzgmzghoumh757nqfnk7kn@ccfi4ts3ytbk
|
|
If this flag is set, then the reply is expected to consist of
the CEC_MSG_VENDOR_COMMAND_WITH_ID opcode followed by the Vendor ID (as
used in bytes 1-4 of the message), followed by the struct cec_msg reply
field.
Note that this assumes that the byte after the Vendor ID is a
vendor-specific opcode.
This flag makes it easier to wait for replies to vendor commands,
using the same CEC framework support for waiting for regular replies.
Support for this flag is indicated by setting the new
CEC_CAP_REPLY_VENDOR_ID capability.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This reverts commit 76299a557f36d624ca32500173ad7856e1ad93c0.
It was merged without meeting userspace requirements.
Signed-off-by: Hamza Mahfooz <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a34 ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df4a ("uprobe: Wire up uretprobe system call")
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Frozen processes present a significant challenge in binder transactions.
When a process is frozen, it cannot, by design, accept and/or respond to
binder transactions. As a result, the sender needs to adjust its
behavior, such as postponing transactions until the peer process
unfreezes. However, there is currently no way to subscribe to these
state change events, making it impossible to implement frozen-aware
behaviors efficiently.
Introduce a binder API for subscribing to frozen state change events.
This allows programs to react to changes in peer process state,
mitigating issues related to binder transactions sent to frozen
processes.
Implementation details:
For a given binder_ref, the state of frozen notification can be one of
the followings:
1. Userspace doesn't want a notification. binder_ref->freeze is null.
2. Userspace wants a notification but none is in flight.
list_empty(&binder_ref->freeze->work.entry) = true
3. A notification is in flight and waiting to be read by userspace.
binder_ref_freeze.sent is false.
4. A notification was read by userspace and kernel is waiting for an ack.
binder_ref_freeze.sent is true.
When a notification is in flight, new state change events are coalesced into
the existing binder_ref_freeze struct. If userspace hasn't picked up the
notification yet, the driver simply rewrites the state. Otherwise, the
notification is flagged as requiring a resend, which will be performed
once userspace acks the original notification that's inflight.
See https://r.android.com/3070045 for how userspace is going to use this
feature.
Signed-off-by: Yu-Ting Tseng <[email protected]>
Acked-by: Carlos Llamas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When building with gcc-5:
In function ‘decode_oa_format.isra.26’,
inlined from ‘xe_oa_set_prop_oa_format’ at drivers/gpu/drm/xe/xe_oa.c:1664:6:
././include/linux/compiler_types.h:510:38: error: call to ‘__compiletime_assert_1336’ declared with attribute error: FIELD_GET: mask is not constant
[...]
./include/linux/bitfield.h:155:3: note: in expansion of macro ‘__BF_FIELD_CHECK’
__BF_FIELD_CHECK(_mask, _reg, 0U, "FIELD_GET: "); \
^
drivers/gpu/drm/xe/xe_oa.c:1573:18: note: in expansion of macro ‘FIELD_GET’
u32 bc_report = FIELD_GET(DRM_XE_OA_FORMAT_MASK_BC_REPORT, fmt);
^
Fixes: b6fd51c62119 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Linux 6.11-rc1
|
|
Add a new .note section containing type, size, offset and flags of every
xfeature that is present.
This information will be used by debuggers to understand the XSAVE layout of
the machine where the core file has been dumped, and to read XSAVE registers,
especially during cross-platform debugging.
The XSAVE layouts of modern AMD and Intel CPUs differ, especially since
Memory Protection Keys and the AVX-512 features have been inculcated into
the AMD CPUs.
Since AMD never adopted (and hence never left room in the XSAVE layout for)
the Intel MPX feature, tools like GDB had assumed a fixed XSAVE layout
matching that of Intel (based on the XCR0 mask).
Hence, core dumps from AMD CPUs didn't match the known size for the XCR0 mask.
This resulted in GDB and other tools not being able to access the values of
the AVX-512 and PKRU registers on AMD CPUs.
To solve this, an interim solution has been accepted into GDB, and is already
a part of GDB 14, see
https://sourceware.org/pipermail/gdb-patches/2023-March/198081.html.
But it depends on heuristics based on the total XSAVE register set size
and the XCR0 mask to infer the layouts of the various register blocks
for core dumps, and hence, is not a foolproof mechanism to determine the
layout of the XSAVE area.
Therefore, add a new core dump note in order to allow GDB/LLDB and other
relevant tools to determine the layout of the XSAVE area of the machine where
the corefile was dumped.
The new core dump note (which is being proposed as a per-process .note
section), NT_X86_XSAVE_LAYOUT (0x205) contains an array of structures.
Each structure describes an individual extended feature containing
offset, size and flags in this format:
struct x86_xfeat_component {
u32 type;
u32 size;
u32 offset;
u32 flags;
};
and in an independent manner, allowing for future extensions without depending
on hw arch specifics like CPUID etc.
[ bp: Massage commit message, zap trailing whitespace. ]
Co-developed-by: Jini Susan George <[email protected]>
Signed-off-by: Jini Susan George <[email protected]>
Co-developed-by: Borislav Petkov (AMD) <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Signed-off-by: Vignesh Balasubramanian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Backmerging to get a late RC of v6.10 before moving into v6.11.
Signed-off-by: Thomas Zimmermann <[email protected]>
|
|
The behavior of an SPI controller data output line (SDO or MOSI or COPI
(Controller Output Peripheral Input) for disambiguation) is usually not
specified when the controller is not clocking out data on SCLK edges.
However, there do exist SPI peripherals that require specific MOSI line
state when data is not being clocked out of the controller.
Conventional SPI controllers may set the MOSI line on SCLK edges then bring
it low when no data is going out or leave the line the state of the last
transfer bit. More elaborated controllers are capable to set the MOSI idle
state according to different configurable levels and thus are more suitable
for interfacing with demanding peripherals.
Add SPI mode bits to allow peripherals to request explicit MOSI idle state
when needed.
When supporting a particular MOSI idle configuration, the data output line
state is expected to remain at the configured level when the controller is
not clocking out data. When a device that needs a specific MOSI idle state
is identified, its driver should request the MOSI idle configuration by
setting the proper SPI mode bit.
Acked-by: Nuno Sa <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Tested-by: David Lechner <[email protected]>
Signed-off-by: Marcelo Schmitt <[email protected]>
Link: https://patch.msgid.link/9802160b5e5baed7f83ee43ac819cb757a19be55.1720810545.git.marcelo.schmitt@analog.com
Signed-off-by: Mark Brown <[email protected]>
|
|
The NBD protocol defines the flag NBD_FLAG_ROTATIONAL to flag that the
export in use should be treated as a rotational device.
Add support for that flag to the kernel driver.
Signed-off-by: Wouter Verhelst <[email protected]>
Reviewed-by: Eric Blake <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Certain GPUs have better copy performance over xGMI on specific
SDMA engines depending on the source and destination GPU.
Allow users to create SDMA queues on these recommended engines.
Close to 2x overall performance has been observed with this
optimization.
Signed-off-by: Jonathan Kim <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
A lot of networking people were at a conference last week, busy
catching COVID, so relatively short PR.
Current release - regressions:
- tcp: process the 3rd ACK with sk_socket for TFO and MPTCP
Current release - new code bugs:
- l2tp: protect session IDR and tunnel session list with one lock,
make sure the state is coherent to avoid a warning
- eth: bnxt_en: update xdp_rxq_info in queue restart logic
- eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field
Previous releases - regressions:
- xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len,
the field reuses previously un-validated pad
Previous releases - always broken:
- tap/tun: drop short frames to prevent crashes later in the stack
- eth: ice: add a per-VF limit on number of FDIR filters
- af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash"
* tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
tun: add missing verification for short frame
tap: add missing verification for short frame
mISDN: Fix a use after free in hfcmulti_tx()
gve: Fix an edge case for TSO skb validity check
bnxt_en: update xdp_rxq_info in queue restart logic
tcp: process the 3rd ACK with sk_socket for TFO/MPTCP
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling
MAINTAINERS: make Breno the netconsole maintainer
MAINTAINERS: Update bonding entry
net: nexthop: Initialize all fields in dumped nexthops
net: stmmac: Correct byte order of perfect_match
selftests: forwarding: skip if kernel not support setting bridge fdb learning limit
tipc: Return non-zero value from tipc_udp_addr2str() on error
netfilter: nft_set_pipapo_avx2: disable softinterrupts
ice: Fix recipe read procedure
ice: Add a per-VF limit on number of FDIR filters
net: bonding: correctly annotate RCU in bond_should_notify_peers()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-25
We've added 14 non-merge commits during the last 8 day(s) which contain
a total of 19 files changed, 177 insertions(+), 70 deletions(-).
The main changes are:
1) Fix af_unix to disable MSG_OOB handling for sockets in BPF sockmap and
BPF sockhash. Also add test coverage for this case, from Michal Luczaj.
2) Fix a segmentation issue when downgrading gso_size in the BPF helper
bpf_skb_adjust_room(), from Fred Li.
3) Fix a compiler warning in resolve_btfids due to a missing type cast,
from Liwei Song.
4) Fix stack allocation for arm64 to align the stack pointer at a 16 byte
boundary in the fexit_sleep BPF selftest, from Puranjay Mohan.
5) Fix a xsk regression to require a flag when actuating tx_metadata_len,
from Stanislav Fomichev.
6) Fix function prototype BTF dumping in libbpf for prototypes that have
no input arguments, from Andrii Nakryiko.
7) Fix stacktrace symbol resolution in perf script for BPF programs
containing subprograms, from Hou Tao.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
tools/resolve_btfids: Fix comparison of distinct pointer types warning in resolve_btfids
bpf, events: Use prog to emit ksymbol event for main program
selftests/bpf: Test sockmap redirect for AF_UNIX MSG_OOB
selftests/bpf: Parametrize AF_UNIX redir functions to accept send() flags
selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected()
af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash
bpftool: Fix typo in usage help
libbpf: Fix no-args func prototype BTF dumping syntax
MAINTAINERS: Update powerpc BPF JIT maintainers
MAINTAINERS: Update email address of Naveen
selftests/bpf: fexit_sleep: Fix stack allocation for arm64
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Julian reports that commit 341ac980eab9 ("xsk: Support tx_metadata_len")
can break existing use cases which don't zero-initialize xdp_umem_reg
padding. Introduce new XDP_UMEM_TX_METADATA_LEN to make sure we
interpret the padding as tx_metadata_len only when being explicitly
asked.
Fixes: 341ac980eab9 ("xsk: Support tx_metadata_len")
Reported-by: Julian Schindel <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Define DRM native context capset in the VirtIO-GPU protocol header.
Signed-off-by: Dmitry Osipenko <[email protected]>
Reviewed-by: Rob Clark <[email protected]>
Reviewed-by: Pierre-Eric Pelloux-Prayer <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This simplifies code and improves documentation"
* tag 'landlock-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Various documentation improvements
landlock: Clarify documentation for struct landlock_ruleset_attr
landlock: Use bit-fields for storing handled layer access masks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
|
|
RNDGETPOOL was thankfully removed twenty years ago, but it's stuck
around in headers. Probably removing it from uapi headers isn't great in
case there are some weird users out there, but we should at least mark
this as having been removed, to save future readers the same goose chase
I just went on.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
Provide a generic C vDSO getrandom() implementation, which operates on
an opaque state returned by vgetrandom_alloc() and produces random bytes
the same way as getrandom(). This has the following API signature:
ssize_t vgetrandom(void *buffer, size_t len, unsigned int flags,
void *opaque_state, size_t opaque_len);
The return value and the first three arguments are the same as ordinary
getrandom(), while the last two arguments are a pointer to the opaque
allocated state and its size. Were all five arguments passed to the
getrandom() syscall, nothing different would happen, and the functions
would have the exact same behavior.
The actual vDSO RNG algorithm implemented is the same one implemented by
drivers/char/random.c, using the same fast-erasure techniques as that.
Should the in-kernel implementation change, so too will the vDSO one.
It requires an implementation of ChaCha20 that does not use any stack,
in order to maintain forward secrecy if a multi-threaded program forks
(though this does not account for a similar issue with SA_SIGINFO
copying registers to the stack), so this is left as an
architecture-specific fill-in. Stack-less ChaCha20 is an easy algorithm
to implement on a variety of architectures, so this shouldn't be too
onerous.
Initially, the state is keyless, and so the first call makes a
getrandom() syscall to generate that key, and then uses it for
subsequent calls. By keeping track of a generation counter, it knows
when its key is invalidated and it should fetch a new one using the
syscall. Later, more than just a generation counter might be used.
Since MADV_WIPEONFORK is set on the opaque state, the key and related
state is wiped during a fork(), so secrets don't roll over into new
processes, and the same state doesn't accidentally generate the same
random stream. The generation counter, as well, is always >0, so that
the 0 counter is a useful indication of a fork() or otherwise
uninitialized state.
If the kernel RNG is not yet initialized, then the vDSO always calls the
syscall, because that behavior cannot be emulated in userspace, but
fortunately that state is short lived and only during early boot. If it
has been initialized, then there is no need to inspect the `flags`
argument, because the behavior does not change post-initialization
regardless of the `flags` value.
Since the opaque state passed to it is mutated, vDSO getrandom() is not
reentrant, when used with the same opaque state, which libc should be
mindful of.
The function works over an opaque per-thread state of a particular size,
which must be marked VM_WIPEONFORK, VM_DONTDUMP, VM_NORESERVE, and
VM_DROPPABLE for proper operation. Over time, the nuances of these
allocations may change or grow or even differ based on architectural
features.
The opaque state passed to vDSO getrandom() must be allocated using the
mmap_flags and mmap_prot parameters provided by the vgetrandom_opaque_params
struct, which also contains the size of each state. That struct can be
obtained with a call to vgetrandom(NULL, 0, 0, ¶ms, ~0UL). Then,
libc can call mmap(2) and slice up the returned array into a state per
each thread, while ensuring that no single state straddles a page
boundary. Libc is expected to allocate a chunk of these on first use,
and then dole them out to threads as they're created, allocating more
when needed.
vDSO getrandom() provides the ability for userspace to generate random
bytes quickly and safely, and is intended to be integrated into libc's
thread management. As an illustrative example, the introduced code in
the vdso_test_getrandom self test later in this series might be used to
do the same outside of libc. In a libc the various pthread-isms are
expected to be elided into libc internals.
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
The vDSO getrandom() implementation works with a buffer allocated with a
new system call that has certain requirements:
- It shouldn't be written to core dumps.
* Easy: VM_DONTDUMP.
- It should be zeroed on fork.
* Easy: VM_WIPEONFORK.
- It shouldn't be written to swap.
* Uh-oh: mlock is rlimited.
* Uh-oh: mlock isn't inherited by forks.
- It shouldn't reserve actual memory, but it also shouldn't crash when
page faulting in memory if none is available
* Uh-oh: VM_NORESERVE means segfaults.
It turns out that the vDSO getrandom() function has three really nice
characteristics that we can exploit to solve this problem:
1) Due to being wiped during fork(), the vDSO code is already robust to
having the contents of the pages it reads zeroed out midway through
the function's execution.
2) In the absolute worst case of whatever contingency we're coding for,
we have the option to fallback to the getrandom() syscall, and
everything is fine.
3) The buffers the function uses are only ever useful for a maximum of
60 seconds -- a sort of cache, rather than a long term allocation.
These characteristics mean that we can introduce VM_DROPPABLE, which
has the following semantics:
a) It never is written out to swap.
b) Under memory pressure, mm can just drop the pages (so that they're
zero when read back again).
c) It is inherited by fork.
d) It doesn't count against the mlock budget, since nothing is locked.
e) If there's not enough memory to service a page fault, it's not fatal,
and no signal is sent.
This way, allocations used by vDSO getrandom() can use:
VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE
And there will be no problem with OOMing, crashing on overcommitment,
using memory when not in use, not wiping on fork(), coredumps, or
writing out to swap.
In order to let vDSO getrandom() use this, expose these via mmap(2) as
MAP_DROPPABLE.
Note that this involves removing the MADV_FREE special case from
sort_folio(), which according to Yu Zhao is unnecessary and will simply
result in an extra call to shrink_folio_list() in the worst case. The
chunk removed reenables the swapbacked flag, which we don't want for
VM_DROPPABLE, and we can't conditionalize it here because there isn't a
vma reference available.
Finally, the provided self test ensures that this is working as desired.
Cc: [email protected]
Acked-by: David Hildenbrand <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|