aboutsummaryrefslogtreecommitdiff
path: root/include/uapi/linux
AgeCommit message (Collapse)AuthorFilesLines
2023-03-31dmaengine: idxd: Add descriptor definitions for DIX generate operationFenghua Yu1-0/+20
The Data Integrity Extension (DIX) generate operation (0x17) computes the Data Integrity Field (DIF) on the source data and writes only the computed DIF for each source block to the PI destination address. Add descriptor definitions for this operation so that user can use DSA to accelerate DIX generate operation. Signed-off-by: Fenghua Yu <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-03-31dmaengine: idxd: Add descriptor definitions for 16 bytes of pattern in ↵Fenghua Yu1-0/+4
memory fill operation The memory fill operation (0x04) can fill in memory with either 8 bytes or 16 bytes of pattern. To fill in memory with 16 bytes of pattern, the first 8 bytes are provided in pattern lower in bytes 16-23 and the next 8 bytes are in pattern upper in bytes 40-47 in the descriptor. Currently only 8 bytes of pattern is enabled. Add descriptor definitions for pattern lower and pattern upper so that user can use 16 bytes of pattern to fill memory. Signed-off-by: Fenghua Yu <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-03-30Merge tag 'wireless-next-2023-03-30' of ↵Jakub Kicinski1-1/+23
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * TC offload support for drivers below mac80211 * reduced neighbor report (RNR) handling for AP mode * mac80211 mesh fast-xmit and fast-rx support * support for another mesh A-MSDU format (seems nobody got the spec right) Major driver changes: Kalle moved the drivers that were just plain C files in drivers/net/wireless/ to legacy/ and virtual/ dirs. hwsim * multi-BSSID support * some FTM support ath11k * MU-MIMO parameters support * ack signal support for management packets rtl8xxxu * support for RTL8710BU aka RTL8188GU chips rtw89 * support for various newer firmware APIs ath10k * enabled threaded NAPI on WCN3990 iwlwifi * lots of work for multi-link/EHT (wifi7) * hardware timestamping support for some devices/firwmares * TX beacon protection on newer hardware * tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits) wifi: clean up erroneously introduced file wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del() wifi: iwlwifi: separate AP link management queues wifi: iwlwifi: mvm: free probe_resp_data later wifi: iwlwifi: bump FW API to 75 for AX devices wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta wifi: iwlwifi: mvm: send full STA during HW restart wifi: iwlwifi: mvm: rework active links counting wifi: iwlwifi: mvm: update mac config when assigning chanctx wifi: iwlwifi: mvm: use the correct link queue wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta wifi: iwlwifi: mvm: fix station link data leak wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link wifi: iwlwifi: mvm: use appropriate link for rate selection wifi: iwlwifi: mvm: use the new lockdep-checking macros wifi: iwlwifi: mvm: remove chanctx WARN_ON wifi: iwlwifi: mvm: avoid sending MAC context for idle wifi: iwlwifi: mvm: remove only link-specific AP keys wifi: iwlwifi: mvm: skip inactive links wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-30net/sched: act_tunnel_key: add support for "don't fragment"Davide Caratti1-0/+1
extend "act_tunnel_key" to allow specifying TUNNEL_DONT_FRAGMENT. Suggested-by: Ilya Maximets <[email protected]> Reviewed-by: Pedro Tammela <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-30netfilter: Correct documentation errors in nf_tables.hMatthieu De Beule1-4/+4
NFTA_RANGE_OP incorrectly says nft_cmp_ops instead of nft_range_ops. NFTA_LOG_GROUP and NFTA_LOG_QTHRESHOLD claim NLA_U32 instead of NLA_U16 NFTA_EXTHDR_SREG isn't documented as a register Signed-off-by: Matthieu De Beule <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-03-30netfilter: nfnetlink_queue: enable classid socket info retrievalEric Sage1-0/+1
This enables associating a socket with a v1 net_cls cgroup. Useful for applying a per-cgroup policy when processing packets in userspace. Signed-off-by: Eric Sage <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-03-30uapi: net: ipv6: Replace fake flex-array with flex-array memberGustavo A. R. Silva1-1/+1
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address the following warning found with GCC-13 and -fstrict-flex-arrays=3 enabled: net/ipv6/exthdrs.c: In function ‘fl6_update_dst’: net/ipv6/exthdrs.c:1393:28: warning: array subscript 0 is outside array bounds of ‘struct in6_addr[0]’ [-Warray-bounds=] 1393 | fl6->daddr = *((struct rt0_hdr *)opt->srcrt)->addr; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./include/linux/ipv6.h:5, from ./include/linux/icmpv6.h:6, from net/ipv6/exthdrs.c:27: ./include/uapi/linux/ipv6.h:84:33: note: while referencing ‘addr’ 84 | struct in6_addr addr[0]; | ^~~~ net/ipv6/exthdrs.c: In function ‘ipv6_push_rthdr0.isra’: net/ipv6/exthdrs.c:1125:19: warning: array subscript <unknown> is outside array bounds of ‘struct in6_addr[0]’ [-Warray-bounds=] 1125 | phdr->addr[hops - 1] = **addr_p; | ~~~~~~~~~~^~~~~~~~~~ ./include/uapi/linux/ipv6.h:84:33: note: while referencing ‘addr’ 84 | struct in6_addr addr[0]; | ^~~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/276 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <[email protected]>
2023-03-30dm: split discards further if target sets max_discard_granularityMike Snitzer1-2/+2
The block core (bio_split_discard) will already split discards based on the 'discard_granularity' and 'max_discard_sectors' queue_limits. But the DM thin target also needs to ensure that it doesn't receive a discard that spans a 'max_discard_sectors' boundary. Introduce a dm_target 'max_discard_granularity' flag that if set will cause DM core to split discard bios relative to 'max_discard_sectors'. This treats 'discard_granularity' as a "min_discard_granularity" and 'max_discard_sectors' as a "max_discard_granularity". Requested-by: Joe Thornber <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2023-03-30KVM: arm64: timers: Allow userspace to set the global counter offsetMarc Zyngier1-0/+3
And this is the moment you have all been waiting for: setting the counter offset from userspace. We expose a brand new capability that reports the ability to set the offset for both the virtual and physical sides. In keeping with the architecture, the offset is expressed as a delta that is substracted from the physical counter value. Once this new API is used, there is no going back, and the counters cannot be written to to set the offsets implicitly (the writes are instead ignored). Reviewed-by: Colton Lewis <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-30wifi: nl80211: support advertising S1G capabilitiesKieran Frewen1-0/+7
Include S1G capabilities in netlink band info messages. Signed-off-by: Kieran Frewen <[email protected]> Co-developed-by: Gilad Itzkovitch <[email protected]> Signed-off-by: Gilad Itzkovitch <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-03-29Merge v6.3-rc4 into drm-nextDaniel Vetter3-2/+5
I just landed the fence deadline PR from Rob that a bunch of drivers want/need to apply driver-specific patches. Backmerge -rc4 so that they don't have to be stuck on -rc2 for no reason at all. Signed-off-by: Daniel Vetter <[email protected]>
2023-03-29Merge tag 'dma-fence-deadline' of https://gitlab.freedesktop.org/drm/msm ↵Daniel Vetter1-22/+15
into drm-next This series adds a deadline hint to fences, so realtime deadlines such as vblank can be communicated to the fence signaller for power/ frequency management decisions. This is partially inspired by a trick i915 does, but implemented via dma-fence for a couple of reasons: 1) To continue to be able to use the atomic helpers 2) To support cases where display and gpu are different drivers See https://patchwork.freedesktop.org/series/93035/ This does not yet add any UAPI, although this will be needed in a number of cases: 1) Workloads "ping-ponging" between CPU and GPU, where we don't want the GPU freq governor to interpret time stalled waiting for GPU as "idle" time 2) Cases where the compositor is waiting for fences to be signaled before issuing the atomic ioctl, for example to maintain 60fps cursor updates even when the GPU is not able to maintain that framerate. Signed-off-by: Daniel Vetter <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt5nDQpa6J86V1oFKPA30YcJzPhAVpmF7N1K1g2N3c=Zg@mail.gmail.com
2023-03-29tracing/user_events: Align structs with tabs for readabilityBeau Belgrave1-12/+12
Add tabs to make struct members easier to read and unify the style of the code. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-03-29tracing/user_events: Add ioctl for disabling addressesBeau Belgrave1-0/+24
Enablements are now tracked by the lifetime of the task/mm. User processes need to be able to disable their addresses if tracing is requested to be turned off. Before unmapping the page would suffice. However, we now need a stronger contract. Add an ioctl to enable this. A new flag bit is added, freeing, to user_event_enabler to ensure that if the event is attempted to be removed while a fault is being handled that the remove is delayed until after the fault is reattempted. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-03-29tracing/user_events: Use remote writes for event enablementBeau Belgrave1-3/+12
As part of the discussions for user_events aligned with user space tracers, it was determined that user programs should register a aligned value to set or clear a bit when an event becomes enabled. Currently a shared page is being used that requires mmap(). Remove the shared page implementation and move to a user registered address implementation. In this new model during the event registration from user programs 3 new values are specified. The first is the address to update when the event is either enabled or disabled. The second is the bit to set/clear to reflect the event being enabled. The third is the size of the value at the specified address. This allows for a local 32/64-bit value in user programs to support both kernel and user tracers. As an example, setting bit 31 for kernel tracers when the event becomes enabled allows for user tracers to use the other bits for ref counts or other flags. The kernel side updates the bit atomically, user programs need to also update these values atomically. User provided addresses must be aligned on a natural boundary, this allows for single page checking and prevents odd behaviors such as a enable value straddling 2 pages instead of a single page. Currently page faults are only logged, future patches will handle these. Link: https://lkml.kernel.org/r/[email protected] Suggested-by: Mathieu Desnoyers <[email protected]> Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-03-29tracing/user_events: Split header into uapi and kernelBeau Belgrave1-0/+48
The UAPI parts need to be split out from the kernel parts of user_events now that other parts of the kernel will reference it. Do so by moving the existing include/linux/user_events.h into include/uapi/linux/user_events.h. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-03-29tty: n_gsm: add ioctl for DLC specific parameter configurationDaniel Starke1-1/+16
Parameter negotiation has been introduced with commit 92f1f0c3290d ("tty: n_gsm: add parameter negotiation support") However, means to set individual parameters per DLCI are not yet implemented. Furthermore, it is currently not possible to keep a DLCI half open until the user application sets the right parameters for it. This is required to allow a user application to set its specific parameters before the underlying link is established. Otherwise, the link is opened and re-established right afterwards if the user application sets incompatible parameters. This may be an unexpected behavior for the peer. Add parameter 'wait_config' to 'gsm_config' to support setups where the DLCI specific user application sets its specific parameters after open() and before the link gets fully established. Setting this to zero disables the user application specific DLCI configuration option. Add the ioctls 'GSMIOC_GETCONF_DLCI' and 'GSMIOC_SETCONF_DLCI' for the ldisc and virtual ttys. This gets/sets the DLCI specific parameters and may trigger a reconnect of the DLCI if incompatible values have been set. Only the parameters for the DLCI associated with the virtual tty can be set or retrieved if called on these. Add remark within the documentation to introduce the new ioctls. Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Reported-by: kernel test robot <[email protected]> Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-29macvlan: Add netlink attribute for broadcast cutoffHerbert Xu1-0/+1
Make the broadcast cutoff configurable through netlink. Note that macvlan is weird because there is no central device for us to configure (the lowerdev could be anything). So all the options are duplicated over what could be thousands of child devices. IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum of all child device settings. This is unnecessary as we could simply store the option in the port device and take the last child device that gets updated as the value to use. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-28dma-buf/sync_file: Surface sync-file uABIRob Clark1-22/+15
We had all of the internal driver APIs, but not the all important userspace uABI, in the dma-buf doc. Fix that. And re-arrange the comments slightly as otherwise the comments for the ioctl nr defines would not show up. v2: Fix docs build warning coming from newly including the uabi header in the docs build Signed-off-by: Rob Clark <[email protected]> Acked-by: Pekka Paalanen <[email protected]>
2023-03-27ethtool: Add support for configuring tx_push_buf_lenShay Agroskin1-0/+2
This attribute, which is part of ethtool's ring param configuration allows the user to specify the maximum number of the packet's payload that can be written directly to the device. Example usage: # ethtool -G [interface] tx-push-buf-len [number of bytes] Co-developed-by: Jakub Kicinski <[email protected]> Signed-off-by: Shay Agroskin <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-24scsi: target: uapi: Replace fake flex-array with flexible-array memberGustavo A. R. Silva1-1/+1
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address the following warning found with GCC-13 and -fstrict-flex-arrays=3 enabled: CC drivers/target/target_core_user.o drivers/target/target_core_user.c: In function ‘queue_cmd_ring’: drivers/target/target_core_user.c:1096:15: warning: array subscript 0 is outside array bounds of ‘struct iovec[0]’ [-Warray-bounds=] 1096 | iov = &entry->req.iov[0]; | ^~~~~~~~~~~~~~~~~~ In file included from drivers/target/target_core_user.c:31: ./include/uapi/linux/target_core_user.h:122:38: note: while referencing ‘iov’ 122 | struct iovec iov[0]; | ^~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/270 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/ZBSchMvTdl7VObKI@work Reviewed-by: Bodo Stroesser <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-03-24cfg80211: support RNR for EMA APAloka Dixit1-0/+13
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial list of nontransmitted BSSID profiles should include in the frame a Reduced Neighbor Report element carrying information for at least the nontransmitted BSSIDs that are not present in the Multiple BSSID element carried in that frame. Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above. Number of RNR elements must be more than or equal to the number of MBSSID elements. This attribute can be used only when EMA is enabled. Userspace is responsible for splitting the RNR into multiple elements such that each element excludes the non-transmitting profiles already included in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon will be generated by adding MBSSID and RNR elements at the same index. If the userspace provides more RNR elements than the number of MBSSID elements then these will be added in every EMA beacon. Signed-off-by: Aloka Dixit <[email protected]> Link: https://lore.kernel.org/r/[email protected] [Johannes: validate elements] Signed-off-by: Johannes Berg <[email protected]>
2023-03-23mei: Move uuid.h to the MEI namespaceAndy Shevchenko3-31/+31
There is only a single user of the UUID uAPI, let's make it part of that user. The way it's done is to prevent compilation time breakage for the user space that does #include <linux/uuid.h> In the future MEI user space tools can switch over to use mei_uuid.h. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-22bpf: Update the struct_ops of a bpf_link.Kui-Feng Lee1-5/+16
By improving the BPF_LINK_UPDATE command of bpf(), it should allow you to conveniently switch between different struct_ops on a single bpf_link. This would enable smoother transitions from one struct_ops to another. The struct_ops maps passing along with BPF_LINK_UPDATE should have the BPF_F_LINK flag. Signed-off-by: Kui-Feng Lee <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-03-22bpf: Create links for BPF struct_ops maps.Kui-Feng Lee1-1/+11
Make bpf_link support struct_ops. Previously, struct_ops were always used alone without any associated links. Upon updating its value, a struct_ops would be activated automatically. Yet other BPF program types required to make a bpf_link with their instances before they could become active. Now, however, you can create an inactive struct_ops, and create a link to activate it later. With bpf_links, struct_ops has a behavior similar to other BPF program types. You can pin/unpin them from their links and the struct_ops will be deactivated when its link is removed while previously need someone to delete the value for it to be deactivated. bpf_links are responsible for registering their associated struct_ops. You can only use a struct_ops that has the BPF_F_LINK flag set to create a bpf_link, while a structs without this flag behaves in the same manner as before and is registered upon updating its value. The BPF_LINK_TYPE_STRUCT_OPS serves a dual purpose. Not only is it used to craft the links for BPF struct_ops programs, but also to create links for BPF struct_ops them-self. Since the links of BPF struct_ops programs are only used to create trampolines internally, they are never seen in other contexts. Thus, they can be reused for struct_ops themself. To maintain a reference to the map supporting this link, we add bpf_struct_ops_link as an additional type. The pointer of the map is RCU and won't be necessary until later in the patchset. Signed-off-by: Kui-Feng Lee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-03-23ata: parport_pc: add 16-bit and 8-bit fast EPP transfer flagsOndrej Zary1-0/+3
PARPORT_EPP_FAST flag currently uses 32-bit I/O port access for data read/write (insl/outsl). Add PARPORT_EPP_FAST_16 and PARPORT_EPP_FAST_8 that use insw/outsw and insb/outsb (and PARPORT_EPP_FAST_32 as alias for PARPORT_EPP_FAST). Signed-off-by: Ondrej Zary <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2023-03-22wifi: nl80211: Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZManikanta Pubbisetty1-1/+3
Currently when NL80211_SCAN_FLAG_COLOCATED_6GHZ is set in the scan flags, in addition to the co-located APs, PSC channels in the 6 GHz band would also be scanned if the user space has asked for it. In other words, the scan would happen on PSC channels & co-located 6 GHz channels that were reported in the RNR IE. Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZ flag to reflect the above said behavior. Signed-off-by: Manikanta Pubbisetty <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-03-21x86/sev: Change snp_guest_issue_request()'s fw_err argumentDionna Glaze1-2/+16
The GHCB specification declares that the firmware error value for a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The upper 32 bits are for the VMM's own error code. The fw_err argument to snp_guest_issue_request() is thus a misnomer, and callers will need access to all 64 bits. The type of unsigned long also causes problems, since sw_exit_info2 is u64 (unsigned long long) vs the argument's unsigned long*. Change this type for issuing the guest request. Pass the ioctl command struct's error field directly instead of in a local variable, since an incomplete guest request may not set the error code, and uninitialized stack memory would be written back to user space. The firmware might not even be called, so bookend the call with the no firmware call error and clear the error. Since the "fw_err" field is really exitinfo2 split into the upper bits' vmm error code and lower bits' firmware error code, convert the 64 bit value to a union. [ bp: - Massage commit message - adjust code - Fix a build issue as Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/oe-kbuild-all/[email protected] - print exitinfo2 in hex Tom: - Correct -EIO exit case. ] Signed-off-by: Dionna Glaze <[email protected]> Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected]
2023-03-21crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALLPeter Gonda1-0/+7
The PSP can return a "firmware error" code of -1 in circumstances where the PSP has not actually been called. To make this protocol unambiguous, name the value SEV_RET_NO_FW_CALL. [ bp: Massage a bit. ] Signed-off-by: Peter Gonda <[email protected]> Signed-off-by: Dionna Glaze <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-20Merge 6.3-rc3 into char-misc-nextGreg Kroah-Hartman4-3/+16
We need the mainline fixes in this branch for testing and other subsystem changes to be based properly on. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-20Merge tag 'amd-drm-next-6.4-2023-03-17' of ↵Dave Airlie1-2/+12
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.4-2023-03-17: amdgpu: - Misc code cleanups - Documentation fixes - Make kobj structures const - Add thermal throttling adjustments for supported APUs - UMC RAS fixes - Display reset fixes - DCN 3.2 fixes - Freesync fixes - DC code reorg - Generalize dmabuf import to work with KFD - DC DML fixes - SRIOV fixes - UVD code cleanups - IH 4.4.2 updates - HDP 4.4.2 updates - SDMA 4.4.2 updates - PSP 13.0.6 updates - Add capped/uncapped workload handling for supported APUs - DCN 3.1.4 updates - Re-org DC Kconfig - USB4 fixes - Reorg DC plane and stream handling - Register vga_switcheroo for apple-gmux - SMU 13.0.6 updates - Fix error checking in read_mm_registers functions for affected families - VCN 4.0.4 fix - Drop redundant pci_enable_pcie_error_reporting() call - RDNA2 SMU OD suspend/resume fix - Expose additional memory stats via fdinfo - RAS fixes - Misc display fixes - DP MST fixes - IOMMU regression fix for KFD amdkfd: - Make kobj structures const - Support for exporting buffers via dmabuf - Multi-VMA page migration fixes - NBIO fixes - Misc code cleanups - Fix possible double free - Fix possible UAF radeon: - iMac fix UAPI: - KFD dmabuf export support. Required for importing KFD buffers into GEM contexts and for RDMA P2P support. Proposed user mode changes: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-03-20media: videodev.h: drop V4L2_FBUF_CAP_LIST/BITMAP_CLIPPINGHans Verkuil1-0/+2
These two capabilities are no longer supported, so no longer define them when compiling the kernel. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-3/+16
net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/[email protected] tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-17Merge tag 'net-6.3-rc3' of ↵Linus Torvalds3-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wifi and ipsec. A little more changes than usual, but it's pretty normal for us that the rc3/rc4 PRs are oversized as people start testing in earnest. Possibly an extra boost from people deploying the 6.1 LTS but that's more of an unscientific hunch. Current release - regressions: - phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol() - virtio: vsock: don't use skbuff state to account credit - virtio: vsock: don't drop skbuff on copy failure - virtio_net: fix page_to_skb() miscalculating the memory size Current release - new code bugs: - eth: correct xdp_features after device reconfig - wifi: nl80211: fix the puncturing bitmap policy - net/mlx5e: flower: - fix raw counter initialization - fix missing error code - fix cloned flow attribute - ipa: - fix some register validity checks - fix a surprising number of bad offsets - kill FILT_ROUT_CACHE_CFG IPA register Previous releases - regressions: - tcp: fix bind() conflict check for dual-stack wildcard address - veth: fix use after free in XDP_REDIRECT when skb headroom is small - ipv4: fix incorrect table ID in IOCTL path - ipvlan: make skb->skb_iif track skb->dev for l3s mode - mptcp: - fix possible deadlock in subflow_error_report - fix UaFs when destroying unaccepted and listening sockets - dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290 Previous releases - always broken: - tcp: tcp_make_synack() can be called from process context, don't assume preemption is disabled when updating stats - netfilter: correct length for loading protocol registers - virtio_net: add checking sq is full inside xdp xmit - bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype change - phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number - eth: i40e: fix crash during reboot when adapter is in recovery mode - eth: ice: avoid deadlock on rtnl lock when auxiliary device plug/unplug meets bonding - dsa: mt7530: - remove now incorrect comment regarding port 5 - set PLL frequency and trgmii only when trgmii is used - eth: mtk_eth_soc: reset PCS state when changing interface types Misc: - ynl: another license adjustment - move the TCA_EXT_WARN_MSG attribute for tc action" * tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits) selftests: bonding: add tests for ether type changes bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change net: renesas: rswitch: Fix GWTSDIE register handling net: renesas: rswitch: Fix the output value of quote from rswitch_rx() ethernet: sun: add check for the mdesc_grab() net: ipa: fix some register validity checks net: ipa: kill FILT_ROUT_CACHE_CFG IPA register net: ipa: add two missing declarations net: ipa: reg: include <linux/bug.h> net: xdp: don't call notifiers during driver init net/sched: act_api: add specific EXT_WARN_MSG for tc action Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795 ynl: make the tooling check the license ynl: broaden the license even more tools: ynl: make definitions optional again hsr: ratelimit only when errors are printed qed/qed_mng_tlv: correctly zero out ->min instead of ->hour selftests: net: devlink_port_split.py: skip test if no suitable device available ...
2023-03-17vxlan: mdb: Add MDB control path supportIdo Schimmel1-0/+10
Implement MDB control path support, enabling the creation, deletion, replacement and dumping of MDB entries in a similar fashion to the bridge driver. Unlike the bridge driver, each entry stores a list of remote VTEPs to which matched packets need to be replicated to and not a list of bridge ports. The motivating use case is the installation of MDB entries by a user space control plane in response to received EVPN routes. As such, only allow permanent MDB entries to be installed and do not implement snooping functionality, avoiding a lot of unnecessary complexity. Since entries can only be modified by user space under RTNL, use RTNL as the write lock. Use RCU to ensure that MDB entries and remotes are not freed while being accessed from the data path during transmission. In terms of uAPI, reuse the existing MDB netlink interface, but add a few new attributes to request and response messages: * IP address of the destination VXLAN tunnel endpoint where the multicast receivers reside. * UDP destination port number to use to connect to the remote VXLAN tunnel endpoint. * VXLAN VNI Network Identifier to use to connect to the remote VXLAN tunnel endpoint. Required when Ingress Replication (IR) is used and the remote VTEP is not a member of originating broadcast domain (VLAN/VNI) [1]. * Source VNI Network Identifier the MDB entry belongs to. Used only when the VXLAN device is in external mode. * Interface index of the outgoing interface to reach the remote VXLAN tunnel endpoint. This is required when the underlay destination IP is multicast (P2MP), as the multicast routing tables are not consulted. All the new attributes are added under the 'MDBA_SET_ENTRY_ATTRS' nest which is strictly validated by the bridge driver, thereby automatically rejecting the new attributes. [1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-3.2.2 Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-16net/sched: act_api: add specific EXT_WARN_MSG for tc actionHangbin Liu1-0/+1
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") I didn't notice the tc action use different enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action. Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this param before going to the TCA_ACT_TAB nest. Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-16ynl: broaden the license even moreJakub Kicinski2-2/+2
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but we still put a slightly different license on the uAPI header than the rest of the code. Use the Linux-syscall-note on all the specs and all generated code. It's moot for kernel code, but should not hurt. This way the licenses match everywhere. Cc: Chuck Lever <[email protected]> Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause") Reviewed-by: Chuck Lever <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-16KVM: x86: Remove the KVM_GET_NR_MMU_PAGES ioctlThomas Huth1-1/+1
The KVM_GET_NR_MMU_PAGES ioctl is quite questionable on 64-bit hosts since it fails to return the full 64 bits of the value that can be set with the corresponding KVM_SET_NR_MMU_PAGES call. Its "long" return value is truncated into an "int" in the kvm_arch_vm_ioctl() function. Since this ioctl also never has been used by userspace applications (QEMU, Google's internal VMM, kvmtool and CrosVM have been checked), it's likely the best if we remove this badly designed ioctl before anybody really tries to use it. Signed-off-by: Thomas Huth <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-03-16platform/x86: ISST: Add SST-TF support via TPMISrinivas Pandruvada1-0/+26
The support of Intel Speed Select Technology - Turbo Frequency (SST-TF) feature enables the ability to set different “All core turbo ratio limits” to cores based on the priority. By using this feature, some cores can be configured to get higher turbo frequency by designating them as high priority at the cost of lower or no turbo frequency on the low priority cores. One new IOCTLs are added: ISST_IF_GET_TURBO_FREQ_INFO : Get information about turbo frequency buckets Once an instance is identified, read or write from correct MMIO offset for a given field as defined in the specification. For details on SST-TF operations using intel-speed-selet utility, refer to: Documentation/admin-guide/pm/intel-speed-select.rst under the kernel documentation Signed-off-by: Srinivas Pandruvada <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Pragya Tanwar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2023-03-16platform/x86: ISST: Add SST-PP support via TPMISrinivas Pandruvada1-0/+180
This Intel Speed Select Technology - Performance Profile (SST-PP) feature introduces a mechanism that allows multiple optimized performance profiles per system. Each profile defines a set of CPUs that need to be online and rest offline to sustain a guaranteed base frequency. Five new IOCTLs are added: ISST_IF_PERF_LEVELS : Get number of performance levels ISST_IF_PERF_SET_LEVEL : Set to a new performance level ISST_IF_PERF_SET_FEATURE : Activate SST-BF/SST-TF for a performance level ISST_IF_GET_PERF_LEVEL_INFO : Get parameters for a performance level ISST_IF_GET_PERF_LEVEL_CPU_MASK : Get CPU mask for a performance level Once an instance is identified, read or write from correct MMIO offset for a given field as defined in the specification. For details on SST PP operations using intel-speed-selet utility, refer to: Documentation/admin-guide/pm/intel-speed-select.rst under the kernel documentation Signed-off-by: Srinivas Pandruvada <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Pragya Tanwar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2023-03-16platform/x86: ISST: Add SST-CP support via TPMISrinivas Pandruvada1-0/+79
Intel Speed Select Technology Core Power (SST-CP) is an interface that allows users to define per core priority. This defines a mechanism to distribute power among cores when there is a power constrained scenario. This defines a class of service (CLOS) configuration. Three new IOCTLs are added: ISST_IF_CORE_POWER_STATE : Enable/Disable SST-CP ISST_IF_CLOS_PARAM : Configure CLOS parameters ISST_IF_CLOS_ASSOC : Associate CPUs to a CLOS To associate CPUs to CLOS, either Linux CPU numbering or PUNIT numbering scheme can be used, using parameter punit_cpu_map (1: for PUNIT numbering 0 for Linux CPU number). There is no change to IOCTL to get PUNIT CPU number for a CPU. Introduce get_instance() function, which is used by majority of IOCTLs processing to convert a socket and power domain to tpmi_per_power_domain_info * instance. This instance has all the MMIO offsets stored to read a particular field. Once an instance is identified, read or write from correct MMIO offset for a given field as defined in the specification. For details on SST CP operations using intel-speed-selet utility, refer to: Documentation/admin-guide/pm/intel-speed-select.rst under the kernel documentation Signed-off-by: Srinivas Pandruvada <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Pragya Tanwar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2023-03-16platform/x86: ISST: Enumerate TPMI SST and create frameworkSrinivas Pandruvada1-0/+18
Enumerate TPMI SST driver and create basic framework to add more features. The basic user space interface is still same as the legacy using /dev/isst_interface. Users of "intel-speed-select" utility should be able to use same commands as prior gens without being aware of new underlying hardware interface. TPMI SST driver enumerates on device "intel_vsec.tpmi-sst". Since there can be multiple instances and there is one common SST core, split implementation into two parts: A common core part and an enumeration part. The enumeration driver is loaded for each device instance and register with the TPMI SST core driver. On very first enumeration the TPMI SST core driver register with SST core driver to get IOCTL callbacks. The api_version is incremented for IOCTL ISST_IF_GET_PLATFORM_INFO, so that user space can issue new IOCTLs. Each TPMI package contains multiple power domains. Each power domain has its own set of SST controls. For each domain map the MMIO memory and update per domain struct tpmi_per_power_domain_info. This information will be used to implement other SST interfaces. Implement first IOCTL commands to get number of TPMI SST instances and instance mask as some of the power domains may not have any SST controls. Signed-off-by: Srinivas Pandruvada <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Pragya Tanwar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2023-03-13bpf: use canonical ftrace pathRoss Zwisler1-4/+4
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many comments and samples in the bpf code still refer to this older debugfs path, so let's update them to avoid confusion. There are a few spots where the bpf code explicitly checks both tracefs and debugfs (tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left those alone so that the tools can continue to work with both paths. Signed-off-by: Ross Zwisler <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Reviewed-by: Steven Rostedt (Google) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-03-13net: virtio_net: implement exact header length guest featureJiri Pirko1-0/+1
Virtio spec introduced a feature VIRTIO_NET_F_GUEST_HDRLEN which when set implicates that device benefits from knowing the exact size of the header. For compatibility, to signal to the device that the header is reliable driver also needs to set this feature. Without this feature set by driver, device has to figure out the header size itself. Quoting the original virtio spec: "hdr_len is a hint to the device as to how much of the header needs to be kept to copy into each packet" "a hint" might not be clear for the reader what does it mean, if it is "maybe like that" of "exactly like that". This feature just makes it crystal clear and let the device count on the hdr_len being filled up by the exact length of header. Also note the spec already has following note about hdr_len: "Due to various bugs in implementations, this field is not useful as a guarantee of the transport header size." Without this feature the device needs to parse the header in core data path handling. Accurate information helps the device to eliminate such header parsing and directly use the hardware accelerators for GSO operation. virtio_net_hdr_from_skb() fills up hdr_len to skb_headlen(skb). The driver already complies to fill the correct value. Introduce the feature and advertise it. Note that virtio spec also includes following note for device implementation: "Caution should be taken by the implementation so as to prevent a malicious driver from attacking the device by setting an incorrect hdr_len." There is a plan to support this feature in our emulated device. A device of SolidRun offers this feature bit. They claim this feature will save the device a few cycles for every GSO packet. Link: https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-230006x3 Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Reviewed-by: Alvaro Karsz <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-10xdp: add xdp_set_features_flag utility routineLorenzo Bianconi1-0/+2
Introduce xdp_set_features_flag utility routine in order to update dynamically xdp_features according to the dynamic hw configuration via ethtool (e.g. changing number of hw rx/tx queues). Add xdp_clear_features_flag() in order to clear all xdp_feature flag. Reviewed-by: Shay Agroskin <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-10Merge tag 'wireless-next-2023-03-10' of ↵Jakub Kicinski1-2/+35
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== wireless-next patches for 6.4 Major changes: cfg80211 * 6 GHz improvements * HW timestamping support * support for randomized auth/deauth TA for PASN privacy (also for mac80211) mac80211 * radiotap TLV and EHT support for the iwlwifi sniffer * HW timestamping support * per-link debugfs for multi-link brcmfmac * support for Apple (M1 Pro/Max) devices iwlwifi * support for a few new devices * EHT sniffer support rtw88 * better support for some SDIO devices (e.g. MAC address from efuse) rtw89 * HW scan support for 8852b * better support for 6 GHz scanning * tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits) wifi: iwlwifi: mvm: fix EOF bit reporting wifi: iwlwifi: Do not include radiotap EHT user info if not needed wifi: iwlwifi: mvm: add EHT RU allocation to radiotap wifi: iwlwifi: Update logs for yoyo reset sw changes wifi: iwlwifi: mvm: clean up duplicated defines wifi: iwlwifi: rs-fw: break out for unsupported bandwidth wifi: iwlwifi: Add support for B step of BnJ-Fm4 wifi: iwlwifi: mvm: make flush code a bit clearer wifi: iwlwifi: mvm: avoid UB shift of snif_queue wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width wifi: iwlwifi: mvm: rename define to generic name wifi: iwlwifi: mvm: allow Microsoft to use TAS wifi: iwlwifi: mvm: add all EHT based on data0 info from HW wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags wifi: iwlwifi: mvm: add an helper function radiotap TLVs wifi: radiotap: separate vendor TLV into header/content wifi: iwlwifi: reduce verbosity of some logging events wifi: iwlwifi: Adding the code to get RF name for MsP device ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-10pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi headerThomas Huth1-11/+0
CONFIG_* switches should not be exposed in uapi headers, thus let's get rid of the USE_WCACHING macro here (which was also named way to generic) and integrate the logic directly in the only function that needs it. Suggested-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-03-10Move bp_type_idx to include/linux/hw_breakpoint.hPalmer Dabbelt1-10/+0
This has a "#ifdef CONFIG_*" that used to be exposed to userspace. The names in here are so generic that I don't think it's a good idea to expose them to userspace (or even the rest of the kernel). There are multiple in-kernel users, so it's been moved to a kernel header file. Signed-off-by: Palmer Dabbelt <[email protected]> Reviewed-by: Andrew Waterman <[email protected]> Reviewed-by: Albert Ou <[email protected]> Message-Id: <[email protected]> [thuth: Remove it also from tools/include/uapi/linux/hw_breakpoint.h] Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-03-10Move ep_take_care_of_epollwakeup() to fs/eventpoll.cPalmer Dabbelt1-12/+0
This doesn't make any sense to expose to userspace, so it's been moved to the one user. This was introduced by commit 95f19f658ce1 ("epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled"). Signed-off-by: Palmer Dabbelt <[email protected]> Reviewed-by: Andrew Waterman <[email protected]> Reviewed-by: Albert Ou <[email protected]> Message-Id: <[email protected]> [thuth: Rebased to fix contextual conflicts] Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-03-10Move COMPAT_ATM_ADDPARTY to net/atm/svc.cPalmer Dabbelt1-4/+0
This used to be behind an #ifdef COMPAT_COMPAT, so most of userspace wouldn't have seen the definition before. Unfortunately this header file became visible to userspace, so the definition has instead been moved to net/atm/svc.c (the only user). Signed-off-by: Palmer Dabbelt <[email protected]> Reviewed-by: Andrew Waterman <[email protected]> Reviewed-by: Albert Ou <[email protected]> Message-Id: <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.