aboutsummaryrefslogtreecommitdiff
path: root/include/uapi/linux
AgeCommit message (Collapse)AuthorFilesLines
2020-10-09Merge tag 'linux-can-next-for-5.10-20201007' of ↵Jakub Kicinski2-0/+169
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== linux-can-next-for-5.10-20201007 The first 3 patches are by me and fix several warnings found when compiling the kernel with W=1. Lukas Bulwahn's patch adjusts the MAINTAINERS file, to accommodate the renaming of the mcp251xfd driver. Vincent Mailhol contributes 3 patches for the CAN networking layer. First error queue support is added the the CAN RAW protocol. The second patch converts the get_can_dlc() and get_canfd_dlc() in-Kernel-only macros from using __u8 to u8. The third patch adds a helper function to calculate the length of one bit in in multiple of time quanta. Oliver Hartkopp's patch add support for the ISO 15765-2:2016 transport protocol to the CAN stack. Three patches by Lad Prabhakar add documentation for various new rcar controllers to the device tree bindings of the rcar_can and rcan_canfd driver. Michael Walle's patch adds various processors to the flexcan driver binding documentation. The next two patches are by me and target the flexcan driver aswell. The remove the ack_grp and ack_bit from the fsl,stop-mode DT property and the driver, as they are not used anymore. As these are the last two arguments this change will not break existing device trees. The last three patches are by Srinivas Neeli and target the xilinx_can driver. The first one increases the lower limit for the bit rate prescaler to 2, the other two fix sparse and coverity findings. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add remote reload statsMoshe Shemesh1-0/+1
Add remote reload stats to hold the history of actions performed due devlink reload commands initiated by remote host. For example, in case firmware activation with reset finished successfully but was initiated by remote host. The function devlink_remote_reload_actions_performed() is exported to enable drivers update on remote reload actions performed as it was not initiated by their own devlink instance. Expose devlink remote reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 remote_reload: driver_reinit 0 fw_activate 0 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 remote_reload: driver_reinit 1 fw_activate 1 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 0, "fw_activate": 0, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 1, "fw_activate": 1, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add reload statsMoshe Shemesh1-0/+6
Add reload stats to hold the history per reload action type and limit. For example, the number of times fw_activate has been performed on this device since the driver module was added or if the firmware activation was performed with or without reset. Add devlink notification on stats update. Expose devlink reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add devlink reload limit optionMoshe Shemesh1-0/+14
Add reload limit to demand restrictions on reload actions. Reload limits supported: no_reset: No reset allowed, no down time allowed, no link flap and no configuration is lost. By default reload limit is unspecified and so no constraints on reload actions are required. Some combinations of action and limit are invalid. For example, driver can not reinitialize its entities without any downtime. The no_reset reload limit will have usecase in this patchset to implement restricted fw_activate on mlx5. Have the uapi parameter of reload limit ready for future support of multiselection. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add reload action option to devlink reload commandMoshe Shemesh1-0/+13
Add devlink reload action to allow the user to request a specific reload action. The action parameter is optional, if not specified then devlink driver re-init action is used (backward compatible). Note that when required to do firmware activation some drivers may need to reload the driver. On the other hand some drivers may need to reset the firmware to reinitialize the driver entities. Therefore, the devlink reload command returns the actions which were actually performed. Reload actions supported are: driver_reinit: driver entities re-initialization, applying devlink-param and devlink-resource values. fw_activate: firmware activate. command examples: $devlink dev reload pci/0000:82:00.0 action driver_reinit reload_actions_performed: driver_reinit $devlink dev reload pci/0000:82:00.0 action fw_activate reload_actions_performed: driver_reinit fw_activate Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09block: fix uapi blkzoned.h commentsDamien Le Moal1-6/+9
Update the kdoc comments for struct blk_zone (capacity field description missing) and for struct blk_zone_report (flags field description missing). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09bpf: Add tcp_notsent_lowat bpf setsockoptNikita V. Shirokov1-1/+1
Adding support for TCP_NOTSENT_LOWAT sockoption (https://lwn.net/Articles/560082/) in tcp bpf programs. Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201009070325.226855-1-tehnerd@tehnerd.com
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-07can: add ISO 15765-2:2016 transport protocolOliver Hartkopp1-0/+166
CAN Transport Protocols offer support for segmented Point-to-Point communication between CAN nodes via two defined CAN Identifiers. As CAN frames can only transport a small amount of data bytes (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this segmentation is needed to transport longer PDUs as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic. This protocol driver implements data transfers according to ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20200928200404.82229-1-socketcan@hartkopp.net [mkl: Removed "WITH Linux-syscall-note" from isotp.c. Fixed indention, a checkpatch warning and typos. Replaced __u{8,32} by u{8,32}. Removed always false (optlen < 0) check in isotp_setsockopt().] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFOMatthew Rosato2-0/+89
Allow the VFIO_DEVICE_GET_INFO ioctl to include a capability chain. Add a flag indicating capability chain support, and introduce the definitions for the first set of capabilities which are specified to s390 zPCI devices. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-07vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devicesBharat Bhushan1-0/+1
DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-07bpf: Fix typo in uapi/linux/bpf.hJakub Wilk1-1/+1
Reported-by: Samanta Navarro <ferivoz@riseup.net> Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201007055717.7319-1-jwilk@jwilk.net
2020-10-07btrfs: tree-checker: fix false alert caused by legacy btrfs root itemQu Wenruo1-0/+14
Commit 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check") introduced btrfs root item size check, however btrfs root item has two versions, the legacy one which just ends before generation_v2 member, is smaller than current btrfs root item size. This caused btrfs kernel to reject valid but old tree root leaves. Fix this problem by also allowing legacy root item, since kernel can already handle them pretty well and upgrade to newer root item format when needed. Reported-by: Martin Steigerwald <martin@lichtvoll.de> Fixes: 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check") CC: stable@vger.kernel.org # 5.4+ Tested-By: Martin Steigerwald <martin@lichtvoll.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07Merge branches 'arm/allwinner', 'arm/mediatek', 'arm/renesas', 'arm/tegra', ↵Joerg Roedel1-5/+13
'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/amd', 'x86/vt-d' and 'core' into next
2020-10-06can: raw: add missing error queue supportVincent Mailhol1-0/+3
Error queue are not yet implemented in CAN-raw sockets. The problem: a userland call to recvmsg(soc, msg, MSG_ERRQUEUE) on a CAN-raw socket would unqueue messages from the normal queue without any kind of error or warning. As such, it prevented CAN drivers from using the functionalities that relies on the error queue such as skb_tx_timestamp(). SCM_CAN_RAW_ERRQUEUE is defined as the type for the CAN raw error queue. SCM stands for "Socket control messages". The name is inspired from SCM_J1939_ERRQUEUE of include/uapi/linux/can/j1939.h. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20200926162527.270030-1-mailhol.vincent@wanadoo.fr Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-06netlink: add mask validationJakub Kicinski1-0/+2
We don't have good validation policy for existing unsigned int attrs which serve as flags (for new ones we could use NLA_BITFIELD32). With increased use of policy dumping having the validation be expressed as part of the policy is important. Add validation policy in form of a mask of supported/valid bits. Support u64 in the uAPI to be future-proof, but really for now the embedded mask member can only hold 32 bits, so anything with bit 32+ set will always fail validation. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06Merge tag 'rxrpc-fixes-20201005' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Miscellaneous fixes Here are some miscellaneous rxrpc fixes: (1) Fix the xdr encoding of the contents read from an rxrpc key. (2) Fix a BUG() for a unsupported encoding type. (3) Fix missing _bh lock annotations. (4) Fix acceptance handling for an incoming call where the incoming call is encrypted. (5) The server token keyring isn't network namespaced - it belongs to the server, so there's no need. Namespacing it means that request_key() fails to find it. (6) Fix a leak of the server keyring. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-11/+3
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-0/+1
Pull networking fixes from David Miller: 1) Make sure SKB control block is in the proper state during IPSEC ESP-in-TCP encapsulation. From Sabrina Dubroca. 2) Various kinds of attributes were not being cloned properly when we build new xfrm_state objects from existing ones. Fix from Antony Antony. 3) Make sure to keep BTF sections, from Tony Ambardar. 4) TX DMA channels need proper locking in lantiq driver, from Hauke Mehrtens. 5) Honour route MTU during forwarding, always. From Maciej Żenczykowski. 6) Fix races in kTLS which can result in crashes, from Rohit Maheshwari. 7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan Jha. 8) Use correct address family in xfrm state lookups, from Herbert Xu. 9) A bridge FDB flush should not clear out user managed fdb entries with the ext_learn flag set, from Nikolay Aleksandrov. 10) Fix nested locking of netdev address lists, from Taehee Yoo. 11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau. 12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit. 13) Don't free command entries in mlx5 while comp handler could still be running, from Eran Ben Elisha. 14) Error flow of request_irq() in mlx5 is busted, due to an off by one we try to free and IRQ never allocated. From Maor Gottlieb. 15) Fix leak when dumping netlink policies, from Johannes Berg. 16) Sendpage cannot be performed when a page is a slab page, or the page count is < 1. Some subsystems such as nvme were doing so. Create a "sendpage_ok()" helper and use it as needed, from Coly Li. 17) Don't leak request socket when using syncookes with mptcp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net/core: check length before updating Ethertype in skb_mpls_{push,pop} net: mvneta: fix double free of txq->buf net_sched: check error pointer in tcf_dump_walker() net: team: fix memory leak in __team_options_register net: typhoon: Fix a typo Typoon --> Typhoon net: hinic: fix DEVLINK build errors net: stmmac: Modify configuration method of EEE timers tcp: fix syn cookied MPTCP request socket leak libceph: use sendpage_ok() in ceph_tcp_sendpage() scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map() drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage() tcp: use sendpage_ok() to detect misused .sendpage nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage() net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send net: introduce helper sendpage_ok() in include/linux/net.h net: usb: pegasus: Proper error handing when setting pegasus' MAC address net: core: document two new elements of struct net_device netlink: fix policy dump leak net/mlx5e: Fix race condition on nhe->n pointer in neigh update net/mlx5e: Fix VLAN create flow ...
2020-10-05rxrpc: Fix accept on a connection that need securingDavid Howells1-1/+1
When a new incoming call arrives at an userspace rxrpc socket on a new connection that has a security class set, the code currently pushes it onto the accept queue to hold a ref on it for the socket. This doesn't work, however, as recvmsg() pops it off, notices that it's in the SERVER_SECURING state and discards the ref. This means that the call runs out of refs too early and the kernel oopses. By contrast, a kernel rxrpc socket manually pre-charges the incoming call pool with calls that already have user call IDs assigned, so they are ref'd by the call tree on the socket. Change the mode of operation for userspace rxrpc server sockets to work like this too. Although this is a UAPI change, server sockets aren't currently functional. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <dhowells@redhat.com>
2020-10-05Merge 5.9-rc8 into staging-nextGreg Kroah-Hartman2-11/+3
We need the IIO fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-04net: devlink: Add unused port flavourAndrew Lunn1-0/+3
Not all ports of a switch need to be used, particularly in embedded systems. Add a port flavour for ports which physically exist in the switch, but are not connected to the front panel etc, and so are unused. By having unused ports present in devlink, it gives a more accurate representation of the hardware. It also allows regions to be associated to such ports, so allowing, for example, to determine unused ports are correctly powered off, or to compare probable reset defaults of unused ports to used ports experiences issues. Actually registering unused ports and setting the flavour to unused is optional. The DSA core will register all such switch ports, but such ports are expected to be limited in number. Bigger ASICs may decide not to list unused ports. v2: Expand the description about why it is useful Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-0/+2
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Rename 'searched' column to 'clashres' in conntrack /proc/ stats to amend a recent patch, from Florian Westphal. 2) Remove unused nft_data_debug(), from YueHaibing. 3) Remove unused definitions in IPVS, also from YueHaibing. 4) Fix user data memleak in tables and objects, this is also amending a recent patch, from Jose M. Guisado. 5) Use nla_memdup() to allocate user data in table and objects, also from Jose M. Guisado 6) User data support for chains, from Jose M. Guisado 7) Remove unused definition in nf_tables_offload, from YueHaibing. 8) Use kvzalloc() in ip_set_alloc(), from Vasily Averin. 9) Fix false positive reported by lockdep in nfnetlink mutexes, from Florian Westphal. 10) Extend fast variant of cmp for neq operation, from Phil Sutter. 11) Implement fast bitwise variant, also from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04Merge tag 'v5.9-rc7' into patchworkMauro Carvalho Chehab3-13/+7
Linux 5.9-rc7 * tag 'v5.9-rc7': (683 commits) Linux 5.9-rc7 mm/thp: Split huge pmds/puds if they're pinned when fork() mm: Do early cow for pinned pages during fork() for ptes mm/fork: Pass new vma pointer into copy_page_range() mm: Introduce mm_struct.has_pinned mm: validate pmd after splitting mm: don't rely on system state to detect hot-plug operations mm: replace memmap_context by meminit_context arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback lib/memregion.c: include memregion.h lib/string.c: implement stpcpy mm/migrate: correct thp migration stats mm/gup: fix gup_fast with dynamic page table folding mm: memcontrol: fix missing suffix of workingset_restore mm, THP, swap: fix allocating cluster for swapfile by mistake mm: slab: fix potential double free in ___cache_free Documentation/llvm: Fix clang target examples io_uring: ensure async buffered read-retry is setup properly KVM: SVM: Add a dedicated INVD intercept routine io_uring: don't unconditionally set plug->nowait = true ...
2020-10-03net/sched: act_mpls: Add action to push MPLS LSE before Ethernet headerGuillaume Nault1-0/+1
Define the MAC_PUSH action which pushes an MPLS LSE before the mac header (instead of between the mac and the network headers as the plain PUSH action does). The only special case is when the skb has an offloaded VLAN. In that case, it has to be inlined before pushing the MPLS header. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03net/sched: act_vlan: Add {POP,PUSH}_ETH actionsGuillaume Nault1-0/+4
Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to respectively pop and push a base Ethernet header at the beginning of a frame. POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any, must be stripped before calling POP_ETH. PUSH_ETH is restricted to skbs with no mac_header, and only the MAC addresses can be configured. The Ethertype is automatically set from skb->protocol. These restrictions ensure that all skb's fields remain consistent, so that this action can't confuse other part of the networking stack (like GSO). Since openvswitch already had these actions, consolidate the code in skbuff.c (like for vlan and mpls push/pop). Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03genetlink: allow dumping command-specific policyJakub Kicinski1-0/+1
Right now CTRL_CMD_GETPOLICY can only dump the family-wide policy. Support dumping policy of a specific op. v3: - rebase after per-op policy export and handle that v2: - make cmd U32, just in case. v1: - don't echo op in the output in a naive way, this should make it cleaner to extend the output format for dumping policies for all the commands at once in the future. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20201001225933.1373426-11-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03genetlink: properly support per-op policy dumpingJohannes Berg1-0/+10
Add support for per-op policy dumping. The data is pretty much as before, except that now the assumption that the policy with index 0 is "the" policy no longer holds - you now need to look at the new CTRL_ATTR_OP_POLICY attribute which is a nested attr (indexed by op) containing attributes for do and dump policies. When a single op is requested, the CTRL_ATTR_OP_POLICY will be added in the same way, since do and dump policies may differ. v2: - conditionally advertise per-command policies only if there actually is a policy being used for the do/dump and it's present at all Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02block: scsi_ioctl: Avoid the use of one-element arraysGustavo A. R. Silva1-1/+4
One-element arrays are being deprecated[1]. Replace the one-element array with a simple object of type compat_caddr_t: 'compat_caddr_t unused'[2], once it seems this field is actually never used. Also, update struct cdrom_generic_command in UAPI by adding an anonimous union to avoid using the one-element array _reserved_. [1] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays [2] https://github.com/KSPP/linux/issues/86 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/lkml/5f76f5d0.qJ4t%2FHWuRzSW7bTa%25lkp@intel.com/ Build-tested-by: kernel test robot <lkp@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02Merge tag 'mac80211-next-for-net-next-2020-10-02' of ↵David S. Miller1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of changes, this time with: * lots more S1G band support * 6 GHz scanning, finally * kernel-doc fixes * non-split wiphy dump fixes in nl80211 * various other small cleanups/features ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02bpf: Introducte bpf_this_cpu_ptr()Hao Luo1-0/+13
Add bpf_this_cpu_ptr() to help access percpu var on this cpu. This helper always returns a valid pointer, therefore no need to check returned value for NULL. Also note that all programs run with preemption disabled, which means that the returned pointer is stable during all the execution of the program. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-6-haoluo@google.com
2020-10-02bpf: Introduce bpf_per_cpu_ptr()Hao Luo1-0/+18
Add bpf_per_cpu_ptr() to help bpf programs access percpu vars. bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the kernel except that it may return NULL. This happens when the cpu parameter is out of range. So the caller must check the returned value. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-5-haoluo@google.com
2020-10-02bpf: Introduce pseudo_btf_idHao Luo1-9/+27
Pseudo_btf_id is a type of ld_imm insn that associates a btf_id to a ksym so that further dereferences on the ksym can use the BTF info to validate accesses. Internally, when seeing a pseudo_btf_id ld insn, the verifier reads the btf_id stored in the insn[0]'s imm field and marks the dst_reg as PTR_TO_BTF_ID. The btf_id points to a VAR_KIND, which is encoded in btf_vminux by pahole. If the VAR is not of a struct type, the dst reg will be marked as PTR_TO_MEM instead of PTR_TO_BTF_ID and the mem_size is resolved to the size of the VAR's type. >From the VAR btf_id, the verifier can also read the address of the ksym's corresponding kernel var from kallsyms and use that to fill dst_reg. Therefore, the proper functionality of pseudo_btf_id depends on (1) kallsyms and (2) the encoding of kernel global VARs in pahole, which should be available since pahole v1.18. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-2-haoluo@google.com
2020-10-02NFSACL: Replace PROC() macro with open codeChuck Lever1-0/+2
Clean up: Follow-up on ten-year-old commit b9081d90f5b9 ("NFS: kill off complicated macro 'PROC'") by performing the same conversion in the NFSACL code. To reduce the chance of error, I copied the original C preprocessor output and then made some minor edits. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-9/+125
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-10-01 The following pull-request contains BPF updates for your *net-next* tree. We've added 90 non-merge commits during the last 8 day(s) which contain a total of 103 files changed, 7662 insertions(+), 1894 deletions(-). Note that once bpf(/net) tree gets merged into net-next, there will be a small merge conflict in tools/lib/bpf/btf.c between commit 1245008122d7 ("libbpf: Fix native endian assumption when parsing BTF") from the bpf tree and the commit 3289959b97ca ("libbpf: Support BTF loading and raw data output in both endianness") from the bpf-next tree. Correct resolution would be to stick with bpf-next, it should look like: [...] /* check BTF magic */ if (fread(&magic, 1, sizeof(magic), f) < sizeof(magic)) { err = -EIO; goto err_out; } if (magic != BTF_MAGIC && magic != bswap_16(BTF_MAGIC)) { /* definitely not a raw BTF */ err = -EPROTO; goto err_out; } /* get file size */ [...] The main changes are: 1) Add bpf_snprintf_btf() and bpf_seq_printf_btf() helpers to support displaying BTF-based kernel data structures out of BPF programs, from Alan Maguire. 2) Speed up RCU tasks trace grace periods by a factor of 50 & fix a few race conditions exposed by it. It was discussed to take these via BPF and networking tree to get better testing exposure, from Paul E. McKenney. 3) Support multi-attach for freplace programs, needed for incremental attachment of multiple XDP progs using libxdp dispatcher model, from Toke Høiland-Jørgensen. 4) libbpf support for appending new BTF types at the end of BTF object, allowing intrusive changes of prog's BTF (useful for future linking), from Andrii Nakryiko. 5) Several BPF helper improvements e.g. avoid atomic op in cookie generator and add a redirect helper into neighboring subsys, from Daniel Borkmann. 6) Allow map updates on sockmaps from bpf_iter context in order to migrate sockmaps from one to another, from Lorenz Bauer. 7) Fix 32 bit to 64 bit assignment from latest alu32 bounds tracking which caused a verifier issue due to type downgrade to scalar, from John Fastabend. 8) Follow-up on tail-call support in BPF subprogs which optimizes x64 JIT prologue and epilogue sections, from Maciej Fijalkowski. 9) Add an option to perf RB map to improve sharing of event entries by avoiding remove- on-close behavior. Also, add BPF_PROG_TEST_RUN for raw_tracepoint, from Song Liu. 10) Fix a crash in AF_XDP's socket_release when memory allocation for UMEMs fails, from Magnus Karlsson. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-01dm: export dm_copy_name_and_uuidMike Snitzer1-2/+2
Allow DM targets to access the configured name and uuid. Also, bump DM ioctl version. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-10-01iommu/vt-d: Check UAPI data processed by IOMMU coreJacob Pan1-0/+1
IOMMU generic layer already does sanity checks on UAPI data for version match and argsz range based on generic information. This patch adjusts the following data checking responsibilities: - removes the redundant version check from VT-d driver - removes the check for vendor specific data size - adds check for the use of reserved/undefined flags Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/1601051567-54787-7-git-send-email-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-01iommu/uapi: Handle data and argsz filled by usersJacob Pan1-0/+1
IOMMU user APIs are responsible for processing user data. This patch changes the interface such that user pointers can be passed into IOMMU code directly. Separate kernel APIs without user pointers are introduced for in-kernel users of the UAPI functionality. IOMMU UAPI data has a user filled argsz field which indicates the data length of the structure. User data is not trusted, argsz must be validated based on the current kernel data size, mandatory data size, and feature flags. User data may also be extended, resulting in possible argsz increase. Backward compatibility is ensured based on size and flags (or the functional equivalent fields) checking. This patch adds sanity checks in the IOMMU layer. In addition to argsz, reserved/unused fields in padding, flags, and version are also checked. Details are documented in Documentation/userspace-api/iommu.rst Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/1601051567-54787-6-git-send-email-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-01iommu/uapi: Use named union for user dataJacob Pan1-2/+2
IOMMU UAPI data size is filled by the user space which must be validated by the kernel. To ensure backward compatibility, user data can only be extended by either re-purpose padding bytes or extend the variable sized union at the end. No size change is allowed before the union. Therefore, the minimum size is the offset of the union. To use offsetof() on the union, we must make it named. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/linux-iommu/20200611145518.0c2817d6@x1.home/ Link: https://lore.kernel.org/r/1601051567-54787-4-git-send-email-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-01iommu/uapi: Add argsz for user filled dataJacob Pan1-3/+9
As IOMMU UAPI gets extended, user data size may increase. To support backward compatibiliy, this patch introduces a size field to each UAPI data structures. It is *always* the responsibility for the user to fill in the correct size. Padding fields are adjusted to ensure 8 byte alignment. Specific scenarios for user data handling are documented in: Documentation/userspace-api/iommu.rst As there is no current users of the API, struct version is not incremented. Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/1601051567-54787-3-git-send-email-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-30bpf: Introduce BPF_F_PRESERVE_ELEMS for perf event arraySong Liu1-0/+3
Currently, perf event in perf event array is removed from the array when the map fd used to add the event is closed. This behavior makes it difficult to the share perf events with perf event array. Introduce perf event map that keeps the perf event open with a new flag BPF_F_PRESERVE_ELEMS. With this flag set, perf events in the array are not removed when the original map fd is closed. Instead, the perf event will stay in the map until 1) it is explicitly removed from the array; or 2) the array is freed. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200930224927.1936644-2-songliubraving@fb.com
2020-09-30io_uring: provide IORING_ENTER_SQ_WAIT for SQPOLL SQ ring waitsJens Axboe1-0/+1
When using SQPOLL, applications can run into the issue of running out of SQ ring entries because the thread hasn't consumed them yet. The only option for dealing with that is checking later, or busy checking for the condition. Provide IORING_ENTER_SQ_WAIT if applications want to wait on this condition. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-30io_uring: allow disabling rings during the creationStefano Garzarella1-0/+2
This patch adds a new IORING_SETUP_R_DISABLED flag to start the rings disabled, allowing the user to register restrictions, buffers, files, before to start processing SQEs. When IORING_SETUP_R_DISABLED is set, SQE are not processed and SQPOLL kthread is not started. The restrictions registration are allowed only when the rings are disable to prevent concurrency issue while processing SQEs. The rings can be enabled using IORING_REGISTER_ENABLE_RINGS opcode with io_uring_register(2). Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-30io_uring: add IOURING_REGISTER_RESTRICTIONS opcodeStefano Garzarella1-0/+31
The new io_uring_register(2) IOURING_REGISTER_RESTRICTIONS opcode permanently installs a feature allowlist on an io_ring_ctx. The io_ring_ctx can then be passed to untrusted code with the knowledge that only operations present in the allowlist can be executed. The allowlist approach ensures that new features added to io_uring do not accidentally become available when an existing application is launched on a newer kernel version. Currently is it possible to restrict sqe opcodes, sqe flags, and register opcodes. IOURING_REGISTER_RESTRICTIONS can only be made once. Afterwards it is not possible to change restrictions anymore. This prevents untrusted code from removing restrictions. Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-30io_uring: use an enumeration for io_uring_register(2) opcodesStefano Garzarella1-11/+16
The enumeration allows us to keep track of the last io_uring_register(2) opcode available. Behaviour and opcodes names don't change. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-30bpf: Add redirect_neigh helper as redirect drop-inDaniel Borkmann1-0/+14
Add a redirect_neigh() helper as redirect() drop-in replacement for the xmit side. Main idea for the helper is to be very similar in semantics to the latter just that the skb gets injected into the neighboring subsystem in order to let the stack do the work it knows best anyway to populate the L2 addresses of the packet and then hand over to dev_queue_xmit() as redirect() does. This solves two bigger items: i) skbs don't need to go up to the stack on the host facing veth ingress side for traffic egressing the container to achieve the same for populating L2 which also has the huge advantage that ii) the skb->sk won't get orphaned in ip_rcv_core() when entering the IP routing layer on the host stack. Given that skb->sk neither gets orphaned when crossing the netns as per 9c4c325252c5 ("skbuff: preserve sock reference when scrubbing the skb.") the helper can then push the skbs directly to the phys device where FQ scheduler can do its work and TCP stack gets proper backpressure given we hold on to skb->sk as long as skb is still residing in queues. With the helper used in BPF data path to then push the skb to the phys device, I observed a stable/consistent TCP_STREAM improvement on veth devices for traffic going container -> host -> host -> container from ~10Gbps to ~15Gbps for a single stream in my test environment. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Cc: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/bpf/f207de81629e1724899b73b8112e0013be782d35.1601477936.git.daniel@iogearbox.net
2020-09-30bpf: Add classid helper only based on skb->skDaniel Borkmann1-0/+10
Similarly to 5a52ae4e32a6 ("bpf: Allow to retrieve cgroup v1 classid from v2 hooks"), add a helper to retrieve cgroup v1 classid solely based on the skb->sk, so it can be used as key as part of BPF map lookups out of tc from host ns, in particular given the skb->sk is retained these days when crossing net ns thanks to 9c4c325252c5 ("skbuff: preserve sock reference when scrubbing the skb."). This is similar to bpf_skb_cgroup_id() which implements the same for v2. Kubernetes ecosystem is still operating on v1 however, hence net_cls needs to be used there until this can be dropped in with the v2 helper of bpf_skb_cgroup_id(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/ed633cf27a1c620e901c5aa99ebdefb028dce600.1601477936.git.daniel@iogearbox.net
2020-09-30netfilter: nf_tables: add userdata attributes to nft_chainJose M. Guisado Gomez1-0/+2
Enables storing userdata for nft_chain. Field udata points to user data and udlen stores its length. Adds new attribute flag NFTA_CHAIN_USERDATA. Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-09-30gpio: uapi: document uAPI v1 as deprecatedKent Gibson1-0/+26
Update uAPI documentation to deprecate v1 structs and ioctls. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-30gpio: uapi: define uAPI v2Kent Gibson1-7/+284
Add a new version of the uAPI to address existing 32/64-bit alignment issues, add support for debounce and event sequence numbers, allow requested lines with different configurations, and provide some future proofing by adding padding reserved for future use. The alignment issue relates to the gpioevent_data, which packs to different sizes on 32-bit and 64-bit platforms. That creates problems for 32-bit apps running on 64-bit kernels. uAPI v2 addresses that particular issue, and the problem more generally, by adding pad fields that explicitly pad structs out to 64-bit boundaries, so they will pack to the same size now, and even if some of the reserved padding is used for __u64 fields in the future. The new structs have been analysed with pahole to ensure that they are sized as expected and contain no implicit padding. The lack of future proofing in v1 makes it impossible to, for example, add the debounce feature that is included in v2. The future proofing is addressed by providing configurable attributes in line config and reserved padding in all structs for future features. Specifically, the line request, config, info, info_changed and event structs receive updated versions and new ioctls. As the majority of the structs and ioctls were being replaced, it is opportune to rework some of the other aspects of the uAPI: v1 has three different flags fields, each with their own separate bit definitions. In v2 that is collapsed to one - gpio_v2_line_flag. The handle and event requests are merged into a single request, the line request, as the two requests were mostly the same other than the edge detection provided by event requests. As a byproduct, the v2 uAPI allows for multiple lines producing edge events on the same line handle. This is a new capability as v1 only supports a single line in an event request. As a consequence, there are now only two types of file handle to be concerned with, the chip and the line, and it is clearer which ioctls apply to which type of handle. There is also some minor renaming of fields for consistency compared to their v1 counterparts, e.g. offset rather than lineoffset or line_offset, and consumer rather than consumer_label. Additionally, v1 GPIOHANDLES_MAX becomes GPIO_V2_LINES_MAX in v2 for clarity, and the gpiohandle_data __u8 array becomes a bitmap in gpio_v2_line_values. The v2 uAPI is mostly a reorganisation and extension of v1, so userspace code, particularly libgpiod, should readily port to it. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Powered by cgit, Gruvboxed by Blaster4385.