| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Allow the UMDs to query the current sclk/mclk
for profiling, etc.
Tested-by: Marek Olšák <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Useful for profiling.
Tested-by: Marek Olšák <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Setup new I915_GETPARAM ioctl entries for subslice total and
EU total. Userspace drivers need these values when constructing
GPGPU commands. This kernel query method is intended to replace
the PCI ID-based tables that userspace drivers currently maintain.
The kernel driver can employ fuse register reads as needed to
ensure the most accurate determination of GT config attributes.
This first became important with Cherryview in which the config
could differ between devices with the same PCI ID.
The kernel detection of these values is device-specific and not
included in this patch. Because zero is not a valid value for any of
these parameters, a value of zero is interpreted as unknown for the
device. Userspace drivers should continue to maintain ID-based tables
for older devices not supported by the new query method.
v2: Increment our I915_GETPARAM indices to fit after REVISION
which was merged ahead of us.
For: VIZ-4636
Signed-off-by: Jeff McGee <[email protected]>
Tested-by: Zhigang Gong <[email protected]>
Acked-by: Zhigang Gong <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
I have no idea about the exact rules, but this angered Dave's 32bit
rhel gcc.
Reported-by: Dave Airlie <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Adds a parameter which can be used with DRM_I915_GETPARAM to query the
GPU revision. The intention is to use this in Mesa to implement the
WaDisableSIMD16On3SrcInstr workaround on Skylake but only for
revision 2.
Signed-off-by: Neil Roberts <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
- Y tiling support for scanout from Tvrtko&Damien
- Remove more UMS support
- some small prep patches for OLR removal from John Harrison
- first few patches for dynamic pagetable allocation from Ben Widawsky, rebased
by tons of other people
- DRRS support patches (Sonika&Vandana)
- fbc patches from Paulo
- make sure our vblank callbacks aren't called when the pipes are off
- various patches all over
* tag 'drm-intel-next-2015-02-27' of git://anongit.freedesktop.org/drm-intel: (61 commits)
drm/i915: Update DRIVER_DATE to 20150227
drm/i915: Clarify obj->map_and_fenceable
drm/i915/skl: Allow Y (and Yf) frame buffer creation
drm/i915/skl: Update watermarks for Y tiling
drm/i915/skl: Updated watermark programming
drm/i915/skl: Adjust get_plane_config() to support Yb/Yf tiling
drm/i915/skl: Teach pin_and_fence_fb_obj() about Y tiling constraints
drm/i915/skl: Adjust intel_fb_align_height() for Yb/Yf tiling
drm/i915/skl: Allow scanning out Y and Yf fbs
drm/i915/skl: Add new displayable tiling formats
drm/i915: Remove DRIVER_MODESET checks from modeset code
drm/i915: Remove regfile code&data for UMS suspend/resume
drm/i915: Remove DRIVER_MODESET checks from gem code
drm/i915: Remove DRIVER_MODESET checks in the gpu reset code
drm/i915: Remove DRIVER_MODESET checks from suspend/resume code
drm/i915: Remove DRIVER_MODESET checks in load/unload/close code
drm/i915: fix a printk format
drm/i915: Add media rc6 residency file to sysfs
drm/i915: Add missing description to parameter in alloc_pt_range
drm/i915: Removed the read of RP_STATE_CAP from sysfs/debugfs functions
...
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
- use the atomic helpers for plane_upate/disable hooks (Matt Roper)
- refactor the initial plane config code (Damien)
- ppgtt prep patches for dynamic pagetable alloc (Ben Widawsky, reworked and
rebased by a lot of other people)
- framebuffer modifier support from Tvrtko Ursulin, drm core code from Rob Clark
- piles of workaround patches for skl from Damien and Nick Hoath
- vGPU support for xengt on the client side (Yu Zhang)
- and the usual smaller things all over
* tag 'drm-intel-next-2015-02-14' of git://anongit.freedesktop.org/drm-intel: (88 commits)
drm/i915: Update DRIVER_DATE to 20150214
drm/i915: Remove references to previously removed UMS config option
drm/i915/skl: Use a LRI for WaDisableDgMirrorFixInHalfSliceChicken5
drm/i915/skl: Fix always true comparison in a revision id check
drm/i915/skl: Implement WaEnableLbsSlaRetryTimerDecrement
drm/i915/skl: Implement WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
drm/i915: Add process identifier to requests
drm/i915/skl: Implement WaBarrierPerformanceFixDisable
drm/i915/skl: Implement WaCcsTlbPrefetchDisable:skl
drm/i915/skl: Implement WaDisableChickenBitTSGBarrierAckForFFSliceCS
drm/i915/skl: Implement WaDisableHDCInvalidation
drm/i915/skl: Implement WaDisableLSQCROPERFforOCL
drm/i915/skl: Implement WaDisablePartialResolveInVc
drm/i915/skl: Introduce a SKL specific init_workarounds()
drm/i915/skl: Document that we implement WaRsClearFWBitsAtReset
drm/i915/skl: Implement WaSetGAPSunitClckGateDisable
drm/i915/skl: Make the init clock gating function skylake specific
drm/i915/skl: Provide a gen9 specific init_render_ring()
drm/i915/skl: Document the WM read latency W/A with its name
drm/i915/skl: Also detect eDRAM on SKL
...
|
|
Starting with SKL display engine can scan out Y, and newly introduced Yf
tiling formats so add the latter to the frame buffer modifier space.
v2: Definitions moved to drm_fourcc.h.
v3: Try to document the format better.
Signed-off-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Damien Lespiau <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
To be used from the new addfb2 extension.
v2:
- Drop Intel-specific untiled modfier.
- Move to drm_fourcc.h.
- Document layouts a bit and denote them as platform-specific and not
useable for cross-driver sharing.
- Add Y-tiling for completeness.
- Drop special docstring markers to avoid confusing kerneldoc.
v3: Give Y-tiling a unique idea, noticed by Tvrtko.
Signed-off-by: Tvrtko Ursulin <[email protected]> (v1)
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
In DRM/KMS we are lacking a good way to deal with tiled/compressed
formats. Especially in the case of dmabuf/prime buffer sharing, where
we cannot always rely on under-the-hood flags passed to driver specific
gem-create ioctl to pass around these extra flags.
The proposal is to add a per-plane format modifier. This allows to, if
necessary, use different tiling patters for sub-sampled planes, etc.
The format modifiers are added at the end of the ioctl struct, so for
legacy userspace it will be zero padded.
v1: original
v1.5: increase modifier to 64b
v2: Incorporate review comments from the big thread, plus a few more.
- Add a getcap so that userspace doesn't have to jump through hoops.
- Allow modifiers only when a flag is set. That way drivers know when
they're dealing with old userspace and need to fish out e.g. tiling
from other information.
- After rolling out checks for ->modifier to all drivers I've decided
that this is way too fragile and needs an explicit opt-in flag. So
do that instead.
- Add a define (just for documentation really) for the "NONE"
modifier. Imo we don't need to add mask #defines since drivers
really should only do exact matches against values defined with
fourcc_mod_code.
- Drop the Samsung tiling modifier on Rob's request since he's not yet
sure whether that one is accurate.
v3:
- Also add a new ->modifier[] array to struct drm_framebuffer and fill
it in drm_helper_mode_fill_fb_struct. Requested by Tvrkto Uruslin.
- Remove TODO in comment and add code comment that modifiers should be
properly documented, requested by Rob.
Cc: Rob Clark <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Daniel Stone <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Michel Dänzer <[email protected]>
Signed-off-by: Rob Clark <[email protected]> (v1.5)
Reviewed-by: Rob Clark <[email protected]>
Reviewed-by: Daniel Stone <[email protected]>
Acked-by: Dave Airlie <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
Flushing out my drm-misc queue with a few oddball things all over.
* tag 'topic/drm-misc-2015-02-06' of git://anongit.freedesktop.org/drm-intel:
drm: Use static attribute groups for managing connector sysfs entries
drm: remove DRM_FORMAT_NV12MT
drm/modes: Print the mode status in human readable form
drm/irq: Don't disable vblank interrupts when already disabled
|
|
So this has been merged originally in
commit 83052d4d5cd518332440bb4ee63d68bb5f744e0f
Author: Seung-Woo Kim <[email protected]>
Date: Thu Dec 15 15:40:55 2011 +0900
drm: Add multi buffer plane pixel formats
which hasn't seen a lot of review really. The problem is that it's not
a real pixel format, but just a different way to lay out NV12 pixels
in macroblocks, i.e. a tiling format.
The new way of doing this is with the soon-to-be-merged fb modifiers.
This was brough up in some long irc discussion around the entire
topic, as an example of where things have gone wrong. Luckily we can
correct the mistake:
- The kms side support for NV12MT is all dead code because
format_check in drm_crtc.c never accepted NV12MT.
- The gem side for the gsc support doesn't look better: The code
forgets to set the pixel format and makes a big mess with the tiling
mode bits, inadvertedly setting them all.
Conclusion: This never really worked (at least not in upstream) and
hence we can safely correct our mistake here.
Cc: Seung-Woo Kim <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Daniel Stone <[email protected]>
Cc: Damien Lespiau <[email protected]>
Reviewed-by: Rob Clark <[email protected]>
Reviewed-by: Gustavo Padovan <[email protected]>
Acked-by: Joonyoung Shim <[email protected]>
Acked-by: Seung-Woo Kim <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
This will let userland only try to use the new ring
when the appropriate kernel is present
v2: change the number to be consistent with upstream (Zhipeng)
Signed-off-by: Zhipeng Gong <[email protected]>
Reviewed--by: Rodrigo Vivi <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
On Skylake GT3 we have 2 Video Command Streamers (VCS), which is asymmetrical.
For example, HEVC GPU commands can be only dispatched to VCS1 ring.
But userspace has no control when using VCS1 or VCS2. This patch introduces
a mechanism to avoid the default ping-pong mode and use one specific ring
through execution flag. This mechanism is usable for all the platforms
with 2 VCS rings.
The open source usage is from these two commits in vaapi/intel:
commit 702050f04131a44ef8ac16651708ce8a8d98e4b8
Author: Zhao, Yakui <[email protected]>
Date: Mon Nov 17 12:44:19 2014 +0800
Allow the batchbuffer to be submitted with override flag
commit a56efcdf27d11ad9b21664b4a2cda72d7f90f5a8
Author: Zhao Yakui <[email protected]>
Date: Mon Nov 17 12:44:22 2014 +0800
Add the override flag to assure that HEVC video command
always uses BSD ring0 for SKL GT3 machine
v2: fix whitespace (Rodrigo)
v3: remove incorrect chunk that came on -collector rebase. (Rodrigo)
v4: change the comment (Zhipeng)
v5: address Daniel's comment (Zhipeng)
Signed-off-by: Zhipeng Gong <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over
* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
drm/i915: Update DRIVER_DATE to 20150117
i915: reuse %ph to dump small buffers
drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
drm/i915: PSR link standby at debugfs
drm/i915: group link_standby setup and let this info visible everywhere.
drm/i915: Add missing vbt check.
drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
drm/i915: Fix kerneldoc for i915 atomic plane code
drm/i915: Don't pretend SDVO hotplug works on 915
drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
drm/i915: Make hpd arrays big enough to avoid out of bounds access
Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
drm/i915: Improve HiZ throughput on Cherryview.
drm/i915: Reset CSB read pointer in ring init
drm/i915: Drop unused position fields (v2)
drm/i915: Move to atomic plane helpers (v9)
...
|
|
Sometimes we wish to tweak how an individual context behaves. Since we
always create a context for every filp, this means that individual
processes can fine tune their behaviour even if they do not explicitly
create a context.
The first example parameter here is to enable multi-process GPU testing,
but the interface should be able to cope with passing arbitrarily complex
parameters.
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Testcase: igt/gem_reset_stats/ban-period-*
Signed-off-by: Daniel Vetter <[email protected]>
|
|
This patch provides support to create write-combining virtual mappings of
GEM object. It intends to provide the same funtionality of 'mmap_gtt'
interface without the constraints and contention of a limited aperture
space, but requires clients handles the linear to tile conversion on their
own. This is for improving the CPU write operation performance, as with such
mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar
to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache
flush after update from CPU side, when object is passed onto GPU. This
type of mapping is specially useful in case of sub-region update,
i.e. when only a portion of the object is to be updated. Using a CPU mmap
in such cases would normally incur a clflush of the whole object, and
using a GTT mmapping would likely require eviction of an active object or
fence and thus stall. The write-combining CPU mmap avoids both.
To ensure the cache coherency, before using this mapping, the GTT domain
has been reused here. This provides the required cache flush if the object
is in CPU domain or synchronization against the concurrent rendering.
Although the access through an uncached mmap should automatically
invalidate the cache lines, this may not be true for non-temporal write
instructions and also not all pages of the object may be updated at any
given point of time through this mapping. Having a call to get_pages in
set_to_gtt_domain function, as added in the earlier patch 'drm/i915:
Broaden application of set-domain(GTT)', would guarantee the clflush and
so there will be no cachelines holding the data for the object before it
is accessed through this map.
The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been
extended with a new flags field (defaulting to 0 for existent users). In
order for userspace to detect the extended ioctl, a new parameter
I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface.
v2: Fix error handling, invalid flag detection, renaming (ickle)
v3: Rebase to latest drm-intel-nightly codebase
The new mmapping is exercised by igt/gem_mmap_wc,
igt/gem_concurrent_blit and igt/gem_gtt_speed.
Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a
Signed-off-by: Akash Goel <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
The atomic modeset ioctl can be used to push any number of new values
for object properties. The driver can then check the full device
configuration as single unit, and try to apply the changes atomically.
The ioctl simply takes a list of object IDs and property IDs and their
values.
Originally based on a patch from Ville Syrjälä, although it has mutated
(mutilated?) enough since then that you probably shouldn't blame it on
him ;-)
The atomic support is hidden behind the DRM_CLIENT_CAP_ATOMIC cap (to
protect legacy userspace) and drm.atomic module param (for now).
v2: Check for file_priv->atomic to make sure we only allow userspace
in-the-know to use atomic.
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Once a driver is using atomic helpers for modeset, the next step is to
switch over to atomic properties. To do this, make sure that any
modeset objects have their ->atomic_{get,set}_property() vfuncs suitably
populated if they have custom properties (you did already remember to
plug in atomic-helper func for the legacy ->set_property() vfuncs,
right?), and then set DRIVER_ATOMIC bit in driver_features flag.
A new cap is introduced, DRM_CLIENT_CAP_ATOMIC, for the purposes of
shielding legacy userspace from atomic properties. Mostly for the
benefit of legacy DDX drivers that do silly things like getting/setting
each property at startup (since some of the new atomic properties will
be able to trigger modeset).
Signed-off-by: Rob Clark <[email protected]>
[danvet: Squash in fixup patch to check for DRM_MODE_PROP_ATOMIC
instaed of the CAP define when filtering properties. Reported by
Tvrtko Uruslin, acked by Rob.]
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Backmerge my drm-misc branch because of conflicts. Just simple stuff
but better to clear this out before I merge the other atomic patches.
Conflicts:
drivers/gpu/drm/drm_crtc.c
drivers/gpu/drm/drm_edid.c
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
drm-intel-next-2014-11-21:
- infoframe tracking (for fastboot) from Jesse
- start of the dri1/ums support removal
- vlv forcewake timeout fixes (Imre)
- bunch of patches to polish the rps code (Imre) and improve it on bdw (Tom
O'Rourke)
- on-demand pinning for execlist contexts
- vlv/chv backlight improvements (Ville)
- gen8+ render ctx w/a work from various people
- skl edp programming (Satheeshakrishna et al.)
- psr docbook (Rodrigo)
- piles of little fixes and improvements all over, as usual
* tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel: (117 commits)
drm/i915: Don't pin LRC in GGTT when dumping in debugfs
drm/i915: Update DRIVER_DATE to 20141121
drm/i915/g4x: fix g4x infoframe readout
drm/i915: Only call mod_timer() if not already pending
drm/i915: Don't rely upon encoder->type for infoframe hw state readout
drm/i915: remove the IRQs enabled WARN from intel_disable_gt_powersave
drm/i915: Use ggtt error obj capture helper for gen8 semaphores
drm/i915: vlv: increase timeout when setting idle GPU freq
drm/i915: vlv: fix cdclk setting during modeset while suspended
drm/i915: Dump hdmi pipe_config state
drm/i915: Gen9 shadowed registers
drm/i915/skl: Gen9 multi-engine forcewake
drm/i915: Read power well status before other registers for drpc info
drm/i915: Pin tiled objects for L-shaped configs
drm/i915: Update ring freq for full gpu freq range
drm/i915: change initial rps frequency for gen8
drm/i915: Keep min freq above floor on HSW/BDW
drm/i915: Use efficient frequency for HSW/BDW
drm/i915: Can i915_gem_init_ioctl
drm/i915: Sanitize ->lastclose
...
|
|
I guess for hysterical raisins this was meant to be the way to read
blob properties. But that's done with the two-stage approach which
uses separate blob kms object and the special-purpose get_blob ioctl.
Shipping userspace seems to have never relied on this, and the kernel
also never put any blob thing onto that property. And nowadays it
would blow up, e.g. in drm_property_destroy. Also it makes no sense to
return values in an ioctl that only returns metadata about everything.
So let's ditch all the internal code for the blob list, rename the
list to be unambiguous and sprinkle comments all over the place to
explain this peculiar piece of api.
v2: Squash in fixup from Rob to remove now unused variables.
Cc: Rob Clark <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Reviewed-by: Rob Clark <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
Currently objects for which the hardware needs a contiguous physical
address are allocated a shadow backing storage to satisfy the contraint.
This shadow buffer is not wired into the normal obj->pages and so the
physical object is incoherent with accesses via the GPU, GTT and CPU. By
setting up the appropriate scatter-gather table, we can allow userspace
to access the physical object via either a GTT mmaping of or by rendering
into the GEM bo. However, keeping the CPU mmap of the shmemfs backing
storage coherent with the contiguous shadow is not yet possible.
Fortuituously, CPU mmaps of objects requiring physical addresses are not
expected to be coherent anyway.
This allows the physical constraint of the GEM object to be transparent
to userspace and allow it to efficiently render into or update them via
the GTT and GPU.
v2: Fix leak of pci handle spotted by Ville
v3: Remove the now duplicate call to detach_phys_object during free.
v4: Wait for rendering before pwrite. As this patch makes it possible to
render into the phys object, we should make it correct as well!
Signed-off-by: Chris Wilson <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Userspace cares about whether or not swizzling depends on the page
address for its direct access into bound objects. Extend the get_tiling
ioctl to report the physical swizzling value in addition to the logical
swizzling value so that userspace can accurately determine when it is
possible for manual detiling.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Akash Goel <[email protected]>
Cc: Daniel Vetter <[email protected]>
Testcase: igt/gem_tiled_wc
Signed-off-by: Daniel Vetter <[email protected]>
|
|
This patch removes DRM_EXYNOS_GEM_MMAP ictrl feature specific
to Exynos drm and instead uses drm generic mmap.
We had used the interface specific to Exynos drm to do mmap directly,
not to use demand paging which maps each page with physical memory
at page fault handler. We don't need the specific mmap interface
because the drm generic mmap which uses vm offset manager stuff can
also do mmap directly.
This patch makes a userspace region to be mapped with whole physical
memory region allocated by userspace request when mmap system call is
requested.
Changelog v2:
- do not set VM_IO, VM_DONTEXPEND and VM_DONTDUMP. These flags were already
set by drm_gem_mmap
- do not include <linux/anon_inodes.h>, which isn't needed anymore.
Signed-off-by: Inki Dae <[email protected]>
|
|
This interface and relevant codes aren't used anymore.
Signed-off-by: Inki Dae <[email protected]>
|
|
The userspace drm.h include doesn't prefix the drm directory. This can lead
to compile failures as /usr/include/drm/ isn't in the standard gcc include
paths. Fix it to be <drm/drm.h>, which matches the rest of the driver drm
header files that get installed into /usr/include/drm.
Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1138759
Fixes: 1d7a5cbf8f74e
Reported-by: Jeffrey Bastian <[email protected]>
Signed-off-by: Josh Boyer <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
Allows pinning of buffers in the non-CPU visible portion of
vram.
v2: incorporate Michel's comments.
v3: rebase on Michel's patch
v4: rebase on Michel's v2 patch
Signed-off-by: Alex Deucher <[email protected]>
Reviewed-by: Michel Dänzer <[email protected]>
|
|
This flag is a hint that userspace expects the BO to be accessed by the
CPU. We can use that hint to prevent such BOs from ever being stored in
the CPU inaccessible part of VRAM.
Signed-off-by: Michel Dänzer <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
into drm-next
radeon userptr support.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: allow userptr write access under certain conditions
drm/radeon: add userptr flag to register MMU notifier v3
drm/radeon: add userptr flag to directly validate the BO to GTT
drm/radeon: add userptr flag to limit it to anonymous memory v2
drm/radeon: add userptr support v8
Conflicts:
drivers/gpu/drm/radeon/radeon_prime.c
|
|
Instead of hard coding the value properly document
that this is an userspace interface.
No intended functional change.
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Whenever userspace mapping related to our userptr change
we wait for it to become idle and unmap it from GTT.
v2: rebased, fix mutex unlock in error path
v3: improve commit message
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This way we test userptr availability at BO creation time instead of first use.
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Avoid problems with writeback by limiting userptr to anonymous memory.
v2: add commit and code comments
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch adds an IOCTL for turning a pointer supplied by
userspace into a buffer object.
It imposes several restrictions upon the memory being mapped:
1. It must be page aligned (both start/end addresses, i.e ptr and size).
2. It must be normal system memory, not a pointer into another map of IO
space (e.g. it must not be a GTT mmapping of another object).
3. The BO is mapped into GTT, so the maximum amount of memory mapped at
all times is still the GTT limit.
4. The BO is only mapped readonly for now, so no write support.
5. List of backing pages is only acquired once, so they represent a
snapshot of the first use.
Exporting and sharing as well as mapping of buffer objects created by
this function is forbidden and results in an -EPERM.
v2: squash all previous changes into first public version
v3: fix tabs, map readonly, don't use MM callback any more
v4: set TTM_PAGE_FLAG_SG so that TTM never messes with the pages,
pin/unpin pages on bind/unbind instead of populate/unpopulate
v5: rebased on 3.17-wip, IOCTL renamed to userptr, reject any unknown
flags, better handle READONLY flag, improve permission check
v6: fix ptr cast warning, use set_page_dirty/mark_page_accessed on unpin
v7: add warning about it's availability in the API definition
v8: drop access_ok check, fix VM mapping bits
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]> (v4)
Reviewed-by: Jérôme Glisse <[email protected]> (v4)
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Ben Skeggs <[email protected]>
|
|
Signed-off-by: Ben Skeggs <[email protected]>
|
|
git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.17-rc1
Mostly some cleanup all over the place. Pitch alignment limitations of
the display controller are now honored and job submission is 64-bit
safe.
The SOR output (used for eDP) properly configures sync signal polarities
according to the display mode rather than hard-coding them to some value
and the number of bits per color is now taken from the panel rather than
hard-coded to properly support 24-bit vs. 18-bit panels.
The DSI controller now properly supports non-continuous clock mode.
GEM objects can now have their flags and tiling mode modified via IOCTLs
to allow buffers imported from Nouveau to be properly displayed. Newer
generations of the Tegra display controller can also detile block linear
buffers at scan-out time.
Finally the driver now properly exports MODULE_DEVICE_TABLEs to allow it
to be automatically loaded when built as a module.
* tag 'drm/tegra/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: add MODULE_DEVICE_TABLEs
drm/tegra: dc - Reset controller on driver remove
drm/tegra: Properly align stride for framebuffers
drm/tegra: sor - Configure proper sync polarities
drm/tegra: sor - Use bits-per-color from panel
drm/tegra: Make job submission 64-bit safe
drm/tegra: Allow non-authenticated processes to create buffer objects
drm/tegra: Add SET/GET_FLAGS IOCTLs
drm/tegra: Add SET/GET_TILING IOCTLs
drm/tegra: Implement more tiling modes
drm/tegra: dsi - Handle non-continuous clock flag
drm/tegra: sor - missing unlock on error
|
|
Signed-off-by: Michel Dänzer <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The DRM_TEGRA_GEM_SET_FLAGS IOCTL can be used to set the flags of a
buffer object after it has been allocated or imported. Flags associated
with a buffer object can be queried using the DRM_TEGRA_GEM_GET_FLAGS
IOCTL.
Reviewed-by: Stéphane Marchesin <[email protected]>
Tested-by: Alexandre Courbot <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Currently the tiling parameters of buffer objects can only be set at
allocation time, and only a single tiled mode is supported. This new
DRM_TEGRA_GEM_SET_TILING IOCTL allows more modes to be set and also
allows the tiling mode to be changed after the allocation. This will
enable the Tegra DRM driver to import buffers from a GPU and directly
scan them out by configuring the display controller appropriately.
To complement this, the DRM_TEGRA_GEM_GET_TILING IOCTL can query the
current tiling mode of a buffer object. This is necessary when importing
buffers via handle (as is done in Mesa for example) so that userspace
can determine the proper parameters for the 2D or 3D engines.
Reviewed-by: Stéphane Marchesin <[email protected]>
Tested-by: Alexandre Courbot <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Pull in drm-next with Dave's DP MST support so that I can merge some
conflicting patches which also touch the driver load sequencing around
interrupt handling.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Added a property to enable user space to set aspect ratio.
This patch contains declaration of the property and code to create the
property.
v2: Thierry's review comments.
- Made aspect ratio enum generic instead of HDMI/CEA specfic
- Removed usage of temporary aspect_ratio variable
v3: Thierry's review comments.
- Fixed indentation
v4: Thierry's review comments.
- Return ENOMEM when property creation fails
Signed-off-by: Vandana Kannan <[email protected]>
Cc: Thierry Reding <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Acked-by: Dave Airlie <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
DRM_COMMAND_END is 0xa0, so the last driver ioctl is 0x9f, not 0x99.
Signed-off-by: Damien Lespiau <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Query to find out how many compute units on a GPU.
Useful for OpenCL usermode drivers.
Signed-off-by: Alex Deucher <[email protected]>
|
|
Like range, but values are signed.
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: David Herrmann <[email protected]>
|
|
An object property is an id (idr) for a drm mode object. This
will allow a property to be used set/get a framebuffer, CRTC, etc.
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
|
|
If we continue to use bitmask for type, we will quickly run out of room
to add new types. Split this up so existing part of bitmask range
continues to function as before, but reserve a chunk of the remaining
space for an integer type-id. Wrap this all up in some type-check
helpers to keep the backwards-compat uglyness contained.
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
- prep refactoring for execlists (Oscar Mateo)
- corner-case fixes for runtime pm (Imre)
- tons of vblank improvements from Ville
- prep work for atomic plane/sprite updates (Ville)
- more chv code, now almost complete (tons of different people)
- refactoring and improvements for drm_irq.c merged through drm-intel-next
- g4x/ilk reset improvements (Ville)
- removal of encoder->mode_set
- moved audio state tracking into pipe_config
- shuffled fb pinning out of the platform crtc modeset callbacks into core code
- userptr support (Chris)
- OOM handling improvements from Chris, with now have a neat oom notifier which
jumps additional debug information.
- topdown allocation of ppgtt PDEs (Ben)
- fixes and small improvements all over
* tag 'drm-intel-next-2014-05-23' of git://anongit.freedesktop.org/drm-intel: (187 commits)
drm/i915: Kill private_default_ctx off
drm/i915: s/i915_hw_context/intel_context
drm/i915: Split the ringbuffers from the rings (3/3)
drm/i915: Split the ringbuffers from the rings (2/3)
drm/i915: Split the ringbuffers from the rings (1/3)
drm/i915: s/intel_ring_buffer/intel_engine_cs
drm/i915: disable GT power saving early during system suspend
drm/i915: fix possible RPM ref leaking during RPS disabling
drm/i915: remove user GTT mappings early during runtime suspend
drm/i915: Implement WaVcpClkGateDisableForMediaReset:ctg, elk
drm/i915: Fix gen2 and hsw+ scanline counter
drm/i915: Draw a picture about video timings
drm/i915: Improve gen3/4 frame counter
drm/i915: Add a small adjustment to the pixel counter on interlaced modes
drm/i915: Hold CRTC lock whilst freezing the planes
drm/i915: Only discard backing storage on releasing the last ref
drm/i915: Wait for pending page flips before enabling/disabling the primary plane
drm/i915: grab the audio power domain when enabling audio on HSW+
drm/i915: don't read HSW_AUD_PIN_ELD_CP_VLD when the power well is off
drm/i915: move bsd dispatch index somewhere better
...
|