| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge series from Luca Ceresoli <[email protected]>:
This series applies various improvements to the DAPM documentation: a
rewrite of a few sections for clarity, style improvements and typo fixes.
Signed-off-by: Luca Ceresoli <[email protected]>
---
Changes in v2:
- avoid wrapping in patch 3 as suggested by Alex
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Luca Ceresoli (12):
ASoC: doc: dapm: fix typos
ASoC: doc: dapm: fix struct name
ASoC: doc: dapm: minor rewording
ASoC: doc: dapm: remove dash after colon
ASoC: doc: dapm: clarify it's an internal API
ASoC: doc: dapm: replace "map" with "graph"
ASoC: doc: dapm: extend initial descrption
ASoC: doc: dapm: describe how widgets and routes are registered
ASoC: doc: dapm: fix and improve section "Registering DAPM controls"
ASoC: doc: dapm: improve section "Codec/DSP Widget Interconnections"
ASoC: doc: dapm: update section "DAPM Widget Events"
ASoC: doc: dapm: update event types
Documentation/sound/soc/dapm-graph.svg | 375 +++++++++++++++++++++++++++++++++
Documentation/sound/soc/dapm.rst | 174 ++++++++++-----
2 files changed, 492 insertions(+), 57 deletions(-)
---
base-commit: c942a0cd3603e34dd2d7237e064d9318cb7f9654
change-id: 20240315-dapm-docs-79bd51f267db
Best regards,
--
Luca Ceresoli <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When dirty data is being written to the cache, setting/waiting on/clearing
the fscache flag is always done in tandem with setting/waiting on/clearing
the writeback flag. The netfslib buffered write routines wait on and set
both flags and the write request cleanup clears both flags, so the fscache
flag is almost superfluous.
The reason it isn't superfluous is because the fscache flag is also used to
indicate that data just read from the server is being written to the cache.
The flag is used to prevent a race involving overlapping direct-I/O writes
to the cache.
Change this to indicate that a page is in need of being copied to the cache
by placing a magic value in folio->private and marking the folios dirty.
Then when the writeback code sees a folio marked in this way, it only
writes it to the cache and not to the server.
If a folio that has this magic value set is modified, the value is just
replaced and the folio will then be uplodaded too.
With this, PG_fscache is no longer required by the netfslib core, 9p and
afs.
Ceph and nfs, however, still need to use the old PG_fscache-based tracking.
To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the
flags in the netfs_inode struct for those filesystems. This reenables the
use of PG_fscache in that inode. 9p and afs use the netfslib write helpers
so get switched over; cifs, for the moment, does page-by-page manual access
to the cache, so doesn't use PG_fscache and is unaffected.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: Matthew Wilcox (Oracle) <[email protected]>
cc: Eric Van Hensbergen <[email protected]>
cc: Latchesar Ionkov <[email protected]>
cc: Dominique Martinet <[email protected]>
cc: Christian Schoenebeck <[email protected]>
cc: Marc Dionne <[email protected]>
cc: Ilya Dryomov <[email protected]>
cc: Xiubo Li <[email protected]>
cc: Steve French <[email protected]>
cc: Paulo Alcantara <[email protected]>
cc: Ronnie Sahlberg <[email protected]>
cc: Shyam Prasad N <[email protected]>
cc: Tom Talpey <[email protected]>
cc: Bharath SM <[email protected]>
cc: Trond Myklebust <[email protected]>
cc: Anna Schumaker <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
|
|
In Field Scan test image files are named in ff-mm-ss-<batch02x>.scan
format. Current trace output, prints the batch number in decimal format.
Make it easier to correlate the trace line to a test image file by
showing the batch number also in hex format.
Add 0x prefix to all fields in the trace line to make the type explicit.
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Reviewed-by: Ashok Raj <[email protected]>
Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
|
|
At last, we should let it work by introducing this reset reason in
trace world.
One of the possible expected outputs is:
... tcp_send_reset: skbaddr=xxx skaddr=xxx src=xxx dest=xxx
state=TCP_ESTABLISHED reason=NOT_SPECIFIED
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Replace the use of pages with folios. Saves a few calls to
compound_head() and removes some uses of obsolete functions.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Vishal Moola (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Use new_folio throughout where we had been using hpage.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Vishal Moola (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Convert from huge_zero_page to huge_zero_folio.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Reclaim the Slab page flag by using a spare bit in PageType. We are
perennially short of page flags for various purposes, and now that the
original SLAB allocator has been retired, SLUB does not use the
mapcount/page_type field. This lets us remove a number of special cases
for ignoring mapcount on Slab pages.
[[email protected]: update vmcoreinfo]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The current folio_test_hugetlb() can be fooled by a concurrent folio split
into returning true for a folio which has never belonged to hugetlbfs.
This can't happen if the caller holds a refcount on it, but we have a few
places (memory-failure, compaction, procfs) which do not and should not
take a speculative reference.
Since hugetlb pages do not use individual page mapcounts (they are always
fully mapped and use the entire_mapcount field to record the number of
mappings), the PageType field is available now that page_mapcount()
ignores the value in this field.
In compaction and with CONFIG_DEBUG_VM enabled, the current implementation
can result in an oops, as reported by Luis. This happens since 9c5ccf2db04b
("mm: remove HUGETLB_PAGE_DTOR") effectively added some VM_BUG_ON() checks
in the PageHuge() testing path.
[[email protected]: update vmcoreinfo]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9c5ccf2db04b ("mm: remove HUGETLB_PAGE_DTOR")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Reported-by: Luis Chamberlain <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218227
Cc: Miaohe Lin <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
arch_update_hw_pressure()
Now that cpufreq provides a pressure value to the scheduler, rename
arch_update_thermal_pressure into HW pressure to reflect that it returns
a pressure applied by HW (i.e. with a high frequency change) and not
always related to thermal mitigation but also generated by max current
limitation as an example. Such high frequency signal needs filtering to be
smoothed and provide an value that reflects the average available capacity
into the scheduler time scale.
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Lukasz Luba <[email protected]>
Reviewed-by: Qais Yousef <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Convert f2fs__page tracepoint class() and its instances to use folio
and related functionality, and rename it to f2fs__folio().
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/trace/events/rpcgss.h
386f4a737964 ("trace: events: cleanup deprecated strncpy uses")
a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field")
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_tc_lib.c
2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device")
784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This commit enhances the ability to troubleshoot the global
cgroup_rstat_lock by introducing wrapper helper functions for the lock
along with associated tracepoints.
Although global, the cgroup_rstat_lock helper APIs and tracepoints take
arguments such as cgroup pointer and cpu_in_loop variable. This
adjustment is made because flushing occurs per cgroup despite the lock
being global. Hence, when troubleshooting, it's important to identify the
relevant cgroup. The cpu_in_loop variable is necessary because the global
lock may be released within the main flushing loop that traverses CPUs.
In the tracepoints, the cpu_in_loop value is set to -1 when acquiring the
main lock; otherwise, it denotes the CPU number processed last.
The new feature in this patchset is detecting when lock is contended. The
tracepoints are implemented with production in mind. For minimum overhead
attach to cgroup:cgroup_rstat_lock_contended, which only gets activated
when trylock detects lock is contended. A quick production check for
issues could be done via this perf commands:
perf record -g -e cgroup:cgroup_rstat_lock_contended
Next natural question would be asking how long time do lock contenders
wait for obtaining the lock. This can be answered by measuring the time
between cgroup:cgroup_rstat_lock_contended and cgroup:cgroup_rstat_locked
when args->contended is set. Like this bpftrace script:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_lock_contended {@start[tid]=nsecs}
tracepoint:cgroup:cgroup_rstat_locked {
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns); }'
Extending with time spend holding the lock will be more expensive as this
also looks at all the non-contended cases.
Like this bpftrace script:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_lock_contended {@start[tid]=nsecs}
tracepoint:cgroup:cgroup_rstat_locked { @locked[tid]=nsecs;
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}}
tracepoint:cgroup:cgroup_rstat_unlock {
@locked_ns=hist(nsecs-@locked[tid]); delete(@locked[tid]);}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns);print(@locked_ns); }'
Signed-off-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
The string SND_SOC_DAPM_DIR_OUT is printed in the snd_soc_dapm_path trace
event instead of its value:
(((REC->path_dir) == SND_SOC_DAPM_DIR_OUT) ? "->" : "<-")
User space cannot parse this, as it has no idea what SND_SOC_DAPM_DIR_OUT
is. Use TRACE_DEFINE_ENUM() to convert it to its value:
(((REC->path_dir) == 1) ? "->" : "<-")
So that user space tools, such as perf and trace-cmd, can parse it
correctly.
Reported-by: Luca Ceresoli <[email protected]>
Fixes: 6e588a0d839b5 ("ASoC: dapm: Consolidate path trace events")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a potential tracepoint crash
- Fix NFSv4 GETATTR on big-endian platforms
* tag 'nfsd-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix endianness issue in nfsd4_encode_fattr4
SUNRPC: Fix rpcgss_context trace event acceptor field
|
|
Add an rcu_sr_normal() trace event. It takes three arguments
first one is the name of RCU flavour, second one is a user id
which triggeres synchronize_rcu_normal() and last one is an
event.
There are two traces in the synchronize_rcu_normal(). On entry,
when a new request is registered and on exit point when request
is completed.
Please note, CONFIG_RCU_TRACE=y is required to activate traces.
Reviewed-by: Paul E. McKenney <[email protected]>
Signed-off-by: Uladzislau Rezki (Sony) <[email protected]>
|
|
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit 6bdb913f0a70 ("mm: wrap calls to
set_pte_at_notify with invalidate_range_start and invalidate_range_end",
2012-10-09) did so to remove the fallback from .invalidate_page() to
.change_pte() and allow sleepable .invalidate_page() hooks.
This however made KVM's usage of the .change_pte() callback completely
moot, because KVM unmaps the sPTEs during .invalidate_range_start()
and therefore .change_pte() has no hope of finding a sPTE to change.
Drop the generic KVM code that dispatches to kvm_set_spte_gfn(), as
well as all the architecture specific implementations.
Signed-off-by: Paolo Bonzini <[email protected]>
Acked-by: Anup Patel <[email protected]>
Acked-by: Michael Ellerman <[email protected]> (powerpc)
Reviewed-by: Bibo Mao <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add "sched_prepare_exec" tracepoint, which is run right after the point
of no return but before the current task assumes its new exec identity.
Unlike the tracepoint "sched_process_exec", the "sched_prepare_exec"
tracepoint runs before flushing the old exec, i.e. while the task still
has the original state (such as original MM), but when the new exec
either succeeds or crashes (but never returns to the original exec).
Being able to trace this event can be helpful in a number of use cases:
* allowing tracing eBPF programs access to the original MM on exec,
before current->mm is replaced;
* counting exec in the original task (via perf event);
* profiling flush time ("sched_prepare_exec" to "sched_process_exec").
Example of tracing output:
$ cat /sys/kernel/debug/tracing/trace_pipe
<...>-379 [003] ..... 179.626921: sched_prepare_exec: interp=/usr/bin/sshd filename=/usr/bin/sshd pid=379 comm=sshd
<...>-381 [002] ..... 180.048580: sched_prepare_exec: interp=/bin/bash filename=/bin/bash pid=381 comm=sshd
<...>-385 [001] ..... 180.068277: sched_prepare_exec: interp=/usr/bin/tty filename=/usr/bin/tty pid=385 comm=bash
<...>-389 [006] ..... 192.020147: sched_prepare_exec: interp=/usr/bin/dmesg filename=/usr/bin/dmesg pid=389 comm=bash
Signed-off-by: Marco Elver <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
The rpcgss_context trace event acceptor field is a dynamically sized
string that records the "data" parameter. But this parameter is also
dependent on the "len" field to determine the size of the data.
It needs to use __string_len() helper macro where the length can be passed
in. It also incorrectly uses strncpy() to save it instead of
__assign_str(). As these macros can change, it is not wise to open code
them in trace events.
As of commit c759e609030c ("tracing: Remove __assign_str_len()"),
__assign_str() can be used for both __string() and __string_len() fields.
Before that commit, __assign_str_len() is required to be used. This needs
to be noted for backporting. (In actuality, commit c1fa617caeb0 ("tracing:
Rework __assign_str() and __string() to not duplicate getting the string")
is the commit that makes __string_str_len() obsolete).
Cc: [email protected]
Fixes: 0c77668ddb4e ("SUNRPC: Introduce trace points in rpc_auth_gss.ko")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
For 2 out of 3 of these changes we can simply swap in strscpy() as it
guarantess NUL-termination which is needed for the following trace
print.
trace_rpcgss_context() should use memcpy as its format specifier %.*s
allows for the length to be specifier (__entry->len). Due to this,
acceptor does not technically need to be NUL-terminated. Moreover,
swapping in strscpy() and keeping everything else the same could result
in truncation of the source string by one byte. To remedy this, we could
use `len + 1` but I am unsure of the size of the destination buffer so a
simple memcpy should suffice.
| TP_printk("win_size=%u expiry=%lu now=%lu timeout=%u acceptor=%.*s",
| __entry->window_size, __entry->expiry, __entry->now,
| __entry->timeout, __entry->len, __get_str(acceptor))
I suspect acceptor not to naturally be a NUL-terminated string due to
the presence of some stringify methods.
| .crstringify_acceptor = gss_stringify_acceptor,
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <[email protected]>
Acked-by: Chuck Lever <[email protected]>
Link: https://lore.kernel.org/r/20240401-strncpy-include-trace-events-mdio-h-v1-1-9cb5a4cda116@google.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Prior to this patch, what we can see by enabling trace_tcp_send is
only happening under two circumstances:
1) active rst mode
2) non-active rst mode and based on the full socket
That means the inconsistency occurs if we use tcpdump and trace
simultaneously to see how rst happens.
It's necessary that we should take into other cases into considerations,
say:
1) time-wait socket
2) no socket
...
By parsing the incoming skb and reversing its 4-tuple can
we know the exact 'flow' which might not exist.
Samples after applied this patch:
1. tcp_send_reset: skbaddr=XXX skaddr=XXX src=ip:port dest=ip:port
state=TCP_ESTABLISHED
2. tcp_send_reset: skbaddr=000...000 skaddr=XXX src=ip:port dest=ip:port
state=UNKNOWN
Note:
1) UNKNOWN means we cannot extract the right information from skb.
2) skbaddr/skaddr could be 0
Signed-off-by: Jason Xing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Introducing entry_saddr and entry_daddr parameters in this macro
for later use can help us record the reverse 4-tuple by analyzing
the 4-tuple of the incoming skb when receiving.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, the microcode field (Microcode Revision) of 'struct mce' is not
exposed to userspace through the mce_record tracepoint.
Knowing the microcode version on which the MCE was received is critical
information for debugging. If the version is not recorded, later attempts
to acquire the version might result in discrepancies since it can be
changed at runtime.
Add microcode version to the tracepoint to prevent ambiguity over
the active version on the system when the MCE was received.
Signed-off-by: Avadhut Naik <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Sohil Mehta <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Machine Check Error information from 'struct mce' is exposed to userspace
through the mce_record tracepoint.
Currently, however, the PPIN (Protected Processor Inventory Number) field
of 'struct mce' is not exposed.
Add a PPIN field to the tracepoint as it provides a unique identifier for
the system (or socket in case of multi-socket systems) on which the MCE
has been received.
Also, add a comment explaining the kind of information that can be and
should be added to the tracepoint.
Signed-off-by: Avadhut Naik <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Sohil Mehta <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Stop using lkb structs in the callback tracepoints so that lkb
references are not needed. This prepares for separating lkb
structs from callbacks.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
|
|
- Only capitalize entries where that makes sense
- Print separate values separately
- Rename 'PROCESSOR' to vendor & CPUID
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Avadhut Naik <[email protected]>
Cc: "Tony Luck" <[email protected]>
Link: https://lore.kernel.org/r/ZgZpn/[email protected]
|
|
The udp_fail_queue_rcv_skb() tracepoint lacks any details on the source
and destination IP/port whereas this information can be critical in case
of UDP/syslog.
Signed-off-by: Balazs Scheidler <[email protected]>
Reviewed-by: Jason Xing <[email protected]>
Link: https://lore.kernel.org/r/0c8b3e33dbf679e190be6f4c6736603a76988a20.1711475011.git.balazs.scheidler@axoflow.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch moves TP_STORE_ADDR_PORTS_SKB() to a common header and removes
the TCP specific implementation details.
Previously the macro assumed the skb passed as an argument is a
TCP packet, the implementation now uses an argument to the L4 header and
uses that to extract the source/destination ports, which happen
to be named the same in "struct tcphdr" and "struct udphdr"
Reviewed-by: Jason Xing <[email protected]>
Signed-off-by: Balazs Scheidler <[email protected]>
Link: https://lore.kernel.org/r/9e306f78260dfbbdc7353ba5f864cc027a409540.1711475011.git.balazs.scheidler@axoflow.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a simple bpf_modify_return_test_tp() kfunc, available to all program
types, that is useful for various testing and benchmarking scenarios, as
it allows to trigger most tracing BPF program types from BPF side,
allowing to do complex testing and benchmarking scenarios.
It is also attachable to for fmod_ret programs, making it a good and
simple way to trigger fmod_ret program under test/benchmark.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-03-25
We've added 38 non-merge commits during the last 13 day(s) which contain
a total of 50 files changed, 867 insertions(+), 274 deletions(-).
The main changes are:
1) Add the ability to specify and retrieve BPF cookie also for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints, from Andrii Nakryiko.
2) Allow the use of bpf_get_{ns_,}current_pid_tgid() helper for all
program types and add additional BPF selftests, from Yonghong Song.
3) Several improvements to bpftool and its build, for example, enabling
libbpf logs when loading pid_iter in debug mode, from Quentin Monnet.
4) Check the return code of all BPF-related set_memory_*() functions during
load and bail out in case they fail, from Christophe Leroy.
5) Avoid a goto in regs_refine_cond_op() such that the verifier can
be better integrated into Agni tool which doesn't support backedges
yet, from Harishankar Vishwanathan.
6) Add a small BPF trie perf improvement by always inlining
longest_prefix_match, from Jesper Dangaard Brouer.
7) Small BPF selftest refactor in bpf_tcp_ca.c to utilize start_server()
helper instead of open-coding it, from Geliang Tang.
8) Improve test_tc_tunnel.sh BPF selftest to prevent client connect
before the server bind, from Alessandro Carminati.
9) Fix BPF selftest benchmark for older glibc and use syscall(SYS_gettid)
instead of gettid(), from Alan Maguire.
10) Implement a backward-compatible method for struct_ops types with
additional fields which are not present in older kernels,
from Kui-Feng Lee.
11) Add a small helper to check if an instruction is addr_space_cast
from as(0) to as(1) and utilize it in x86-64 JIT, from Puranjay Mohan.
12) Small cleanup to remove unnecessary error check in
bpf_struct_ops_map_update_elem, from Martin KaFai Lau.
13) Improvements to libbpf fd validity checks for BPF map/programs,
from Mykyta Yatsenko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (38 commits)
selftests/bpf: Fix flaky test btf_map_in_map/lookup_update
bpf: implement insn_is_cast_user() helper for JITs
bpf: Avoid get_kernel_nofault() to fetch kprobe entry IP
selftests/bpf: Use start_server in bpf_tcp_ca
bpf: Sync uapi bpf.h to tools directory
libbpf: Add new sec_def "sk_skb/verdict"
selftests/bpf: Mark uprobe trigger functions with nocf_check attribute
selftests/bpf: Use syscall(SYS_gettid) instead of gettid() wrapper in bench
bpf-next: Avoid goto in regs_refine_cond_op()
bpftool: Clean up HOST_CFLAGS, HOST_LDFLAGS for bootstrap bpftool
selftests/bpf: scale benchmark counting by using per-CPU counters
bpftool: Remove unnecessary source files from bootstrap version
bpftool: Enable libbpf logs when loading pid_iter in debug mode
selftests/bpf: add raw_tp/tp_btf BPF cookie subtests
libbpf: add support for BPF cookie for raw_tp/tp_btf programs
bpf: support BPF cookie in raw tracepoint (raw_tp, tp_btf) programs
bpf: pass whole link instead of prog when triggering raw tracepoint
bpf: flatten bpf_probe_register call chain
selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh
selftests/bpf: Add a sk_msg prog bpf_get_ns_current_pid_tgid() test
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
A bigger buffer allow for more diverse tag names.
Signed-off-by: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
As the title said, use the macro directly like the patch[1] did
to avoid those duplications. No functional change.
[1]
commit 6a6b0b9914e7 ("tcp: Avoid preprocessor directives in tracepoint macro args")
Signed-off-by: Jason Xing <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
As the title said, use the macro directly like the patch[1] did
to avoid those duplications. No functional change.
[1]
commit 6a6b0b9914e7 ("tcp: Avoid preprocessor directives in tracepoint macro args")
Signed-off-by: Jason Xing <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Put the macro into another standalone file for better extension.
Some tracepoints can use this common part in the future.
Signed-off-by: Jason Xing <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The trace event "workqueue_activate_work" only print work struct.
However, function is the region of interest in a full sequence of work.
Current workqueue_activate_work trace event output:
workqueue_activate_work: work struct ffffff88b4a0f450
With this change, workqueue_activate_work will print the function name,
align with workqueue_queue_work/execute_start/execute_end event.
workqueue_activate_work: work struct ffffff80413a78b8 function=vmstat_update
Signed-off-by: Kassey Li <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Instead of passing prog as an argument to bpf_trace_runX() helpers, that
are called from tracepoint triggering calls, store BPF link itself
(struct bpf_raw_tp_link for raw tracepoints). This will allow to pass
extra information like BPF cookie into raw tracepoint registration.
Instead of replacing `struct bpf_prog *prog = __data;` with
corresponding `struct bpf_raw_tp_link *link = __data;` assignment in
`__bpf_trace_##call` I just passed `__data` through into underlying
bpf_trace_runX() call. This works well because we implicitly cast `void *`,
and it also avoids naming clashes with arguments coming from
tracepoint's "proto" list. We could have run into the same problem with
"prog", we just happened to not have a tracepoint that has "prog" input
argument. We are less lucky with "link", as there are tracepoints using
"link" argument name already. So instead of trying to avoid naming
conflicts, let's just remove intermediate local variable. It doesn't
hurt readibility, it's either way a bit of a maze of calls and macros,
that requires careful reading.
Acked-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
As __assign_str() no longer uses its "src" parameter, there's a check to
make sure nothing depends on it being different than what was passed to
__string(). It originally just compared the pointer passed to __string()
with the pointer passed into __assign_str() via the "src" parameter. But
there's a couple of outliers that just pass in a quoted string constant,
where comparing the pointers is UB to the compiler, as the compiler is
free to create multiple copies of the same string constant.
Instead, just use strcmp(). It may slow down the trace event, but this
will eventually be removed.
Also, fix the issue of passing NULL to strcmp() by adding a WARN_ON() to
make sure that both "src" and the pointer saved in __string() are either
both NULL or have content, and then checking if "src" is not NULL before
performing the strcmp().
Link: https://lore.kernel.org/all/CAHk-=wjxX16kWd=uxG5wzqt=aXoYDf1BgWOKk+qVmAO0zh7sjA@mail.gmail.com/
Fixes: b1afefa62ca9 ("tracing: Use strcmp() in __assign_str() WARN_ON() check")
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Main user visible change:
- User events can now have "multi formats"
The current user events have a single format. If another event is
created with a different format, it will fail to be created. That
is, once an event name is used, it cannot be used again with a
different format. This can cause issues if a library is using an
event and updates its format. An application using the older format
will prevent an application using the new library from registering
its event.
A task could also DOS another application if it knows the event
names, and it creates events with different formats.
The multi-format event is in a different name space from the single
format. Both the event name and its format are the unique
identifier. This will allow two different applications to use the
same user event name but with different payloads.
- Added support to have ftrace_dump_on_oops dump out instances and
not just the main top level tracing buffer.
Other changes:
- Add eventfs_root_inode
Only the root inode has a dentry that is static (never goes away)
and stores it upon creation. There's no reason that the thousands
of other eventfs inodes should have a pointer that never gets set
in its descriptor. Create a eventfs_root_inode desciptor that has a
eventfs_inode descriptor and a dentry pointer, and only the root
inode will use this.
- Added WARN_ON()s in eventfs
There's some conditionals remaining in eventfs that should never be
hit, but instead of removing them, add WARN_ON() around them to
make sure that they are never hit.
- Have saved_cmdlines allocation also include the map_cmdline_to_pid
array
The saved_cmdlines structure allocates a large amount of data to
hold its mappings. Within it, it has three arrays. Two are already
apart of it: map_pid_to_cmdline[] and saved_cmdlines[]. More memory
can be saved by also including the map_cmdline_to_pid[] array as
well.
- Restructure __string() and __assign_str() macros used in
TRACE_EVENT()
Dynamic strings in TRACE_EVENT() are declared with:
__string(name, source)
And assigned with:
__assign_str(name, source)
In the tracepoint callback of the event, the __string() is used to
get the size needed to allocate on the ring buffer and
__assign_str() is used to copy the string into the ring buffer.
There's a helper structure that is created in the TRACE_EVENT()
macro logic that will hold the string length and its position in
the ring buffer which is created by __string().
There are several trace events that have a function to create the
string to save. This function is executed twice. Once for
__string() and again for __assign_str(). There's no reason for
this. The helper structure could also save the string it used in
__string() and simply copy that into __assign_str() (it also
already has its length).
By using the structure to store the source string for the
assignment, it means that the second argument to __assign_str() is
no longer needed.
It will be removed in the next merge window, but for now add a
warning if the source string given to __string() is different than
the source string given to __assign_str(), as the source to
__assign_str() isn't even used and will be going away.
- Added checks to make sure that the source of __string() is also the
source of __assign_str() so that it can be safely removed in the
next merge window.
Included fixes that the above check found.
- Other minor clean ups and fixes"
* tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
tracing: Add __string_src() helper to help compilers not to get confused
tracing: Use strcmp() in __assign_str() WARN_ON() check
tracepoints: Use WARN() and not WARN_ON() for warnings
tracing: Use div64_u64() instead of do_div()
tracing: Support to dump instance traces by ftrace_dump_on_oops
tracing: Remove second parameter to __assign_rel_str()
tracing: Add warning if string in __assign_str() does not match __string()
tracing: Add __string_len() example
tracing: Remove __assign_str_len()
ftrace: Fix most kernel-doc warnings
tracing: Decrement the snapshot if the snapshot trigger fails to register
tracing: Fix snapshot counter going between two tracers that use it
tracing: Use EVENT_NULL_STR macro instead of open coding "(null)"
tracing: Use ? : shortcut in trace macros
tracing: Do not calculate strlen() twice for __string() fields
tracing: Rework __assign_str() and __string() to not duplicate getting the string
cxl/trace: Properly initialize cxl_poison region name
net: hns3: tracing: fix hclgevf trace event strings
drm/i915: Add missing ; to __assign_str() macros in tracepoint code
NFSD: Fix nfsd_clid_class use of __string_len() macro
...
|
|
The __string() helper macro of the TRACE_EVENT() macro is used to
determine how much of the ring buffer needs to be allocated to fit the
given source string. Some trace events have a string that is dependent on
another variable that could be NULL, and in those cases the string is
passed in to be NULL.
The __string() macro can handle being passed in a NULL pointer for which
it will turn it into "(null)". It does that with:
strlen((src) ? (const char *)(src) : "(null)") + 1
But if src itself has the same conditional type it can confuse the
compiler. That is:
__string(r ? dev(r)->name : NULL)
Would turn into:
strlen((r ? dev(r)->name : NULL) ? (r ? dev(r)->name : NULL) : "(null)" + 1
For which the compiler thinks that NULL is being passed to strlen() and
gives this kind of warning:
./include/trace/stages/stage5_get_offsets.h:50:21: warning: argument 1 null where non-null expected [-Wnonnull]
50 | strlen((src) ? (const char *)(src) : "(null)") + 1)
Instead, create a static inline function that takes the src string and
will return the string if it is not NULL and will return "(null)" if it
is. This will then make the strlen() line:
strlen(__string_src(src)) + 1
Where the compiler can see that strlen() will not end up with NULL and
does not warn about it.
Note that this depends on commit 51270d573a8d ("tracing/net_sched: Fix
tracepoints that save qdisc_dev() as a string") being applied, as passing
the qdisc_dev() into __string_src() will give an error.
Link: https://lore.kernel.org/all/ZfNmfCmgCs4Nc+EH@aschofie-mobl2/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Reported-by: Alison Schofield <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The WARN_ON() check in __assign_str() to catch where the source variable
to the macro doesn't match the source variable to __string() gives an
error in clang:
>> include/trace/events/sunrpc.h:703:4: warning: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Wstring-compare]
670 | __assign_str(progname, "unknown");
That's because the __assign_str() macro has:
WARN_ON_ONCE((src) != __data_offsets.dst##_ptr_);
Where "src" is a string literal. Clang warns when comparing a string
literal directly as it is undefined to what the value of the literal is.
Since this is still to make sure the same string that goes to __string()
is the same as __assign_str(), for string literals do a test for that and
then use strcmp() in those cases
Note that this depends on commit 51270d573a8d ("tracing/net_sched: Fix
tracepoints that save qdisc_dev() as a string") being applied, as this was
what found that bug.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: 433e1d88a3be ("tracing: Add warning if string in __assign_str() does not match __string()")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The second parameter of __assign_rel_str() is no longer used. It can be removed.
Note, the only real users of rel_string is user events. This code is just
in the sample code for testing purposes.
This makes __assign_rel_str() different than __assign_str() but that's
fine. __assign_str() is used over 700 places and has a larger impact. That
change will come later.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Mathieu Desnoyers <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
In preparation to remove the second parameter of __assign_str(), make sure
it is really a duplicate of __string() by adding a WARN_ON_ONCE().
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Mathieu Desnoyers <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Now that __assign_str() gets the length from the __string() (and
__string_len()) macros, there's no reason to have a separate
__assign_str_len() macro as __assign_str() can get the length of the
string needed.
Also remove __assign_rel_str() although it had no users anyway.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Jeff Layton <[email protected]>
Acked-by: Chuck Lever <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The TRACE_EVENT macros has some dependency if a __string() field is NULL,
where it will save "(null)" as the string. This string is also used by
__assign_str(). It's better to create a single macro instead of having
something that will not be caught by the compiler if there is an
unfortunate typo.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chuck Lever <[email protected]>
Suggested-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Instead of having:
#define __assign_str(dst, src) \
memcpy(__get_str(dst), __data_offsets.dst##_ptr_ ? \
__data_offsets.dst##_ptr_ : "(null)", \
__get_dynamic_array_len(dst))
Use the ? : shortcut and compact it down to:
#define __assign_str(dst, src) \
memcpy(__get_str(dst), __data_offsets.dst##_ptr_ ? : "(null)", \
__get_dynamic_array_len(dst))
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chuck Lever <[email protected]>
Suggested-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The TRACE_EVENT() macro handles dynamic strings by having:
TP_PROTO(struct some_struct *s),
TP_ARGS(s),
TP_STRUCT__entry(
__string(my_string, s->string)
),
TP_fast_assign(
__assign_str(my_string, s->string);
)
TP_printk("%s", __get_str(my_string))
There's even some code that may call a function helper to find the
s->string value. The problem with the above is that the work to get the
s->string is done twice. Once at the __string() and again in the
__assign_str().
The length of the string is calculated via a strlen(), not once, but
twice. Once during the __string() macro and again in __assign_str(). But
the length is actually already recorded in the data location and here's no
reason to call strlen() again.
Just use the saved length that was saved in the __string() code for the
__assign_str() code.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chuck Lever <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
string
The TRACE_EVENT() macro handles dynamic strings by having:
TP_PROTO(struct some_struct *s),
TP_ARGS(s),
TP_STRUCT__entry(
__string(my_string, s->string)
),
TP_fast_assign(
__assign_str(my_string, s->string);
)
TP_printk("%s", __get_str(my_string))
There's even some code that may call a function helper to find the
s->string value. The problem with the above is that the work to get the
s->string is done twice. Once at the __string() and again in the
__assign_str().
But the __string() uses dynamic_array() which has a helper structure that
is created holding the offsets and length of the string fields. Instead of
finding the string twice, just save it off in another field from that
helper structure, and have __assign_str() use that instead.
Note, this also means that the second parameter of __assign_str() isn't
even used anymore, and may be removed in the future.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chuck Lever <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|