| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
|
|
git://git.kernel.dk/linux-block
Pull io_uring buffered writes support from Jens Axboe:
"This contains support for buffered writes, specifically for XFS. btrfs
is in progress, will be coming in the next release.
io_uring does support buffered writes on any file type, but since the
buffered write path just always -EAGAIN (or -EOPNOTSUPP) any attempt
to do so if IOCB_NOWAIT is set, any buffered write will effectively be
handled by io-wq offload. This isn't very efficient, and we even have
specific code in io-wq to serialize buffered writes to the same inode
to avoid further inefficiencies with thread offload.
This is particularly sad since most buffered writes don't block, they
simply copy data to a page and dirty it. With this pull request, we
can handle buffered writes a lot more effiently.
If balance_dirty_pages() needs to block, we back off on writes as
indicated.
This improves buffered write support by 2-3x.
Jan Kara helped with the mm bits for this, and Stefan handled the
fs/iomap/xfs/io_uring parts of it"
* tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block:
mm: honor FGP_NOWAIT for page cache page allocation
xfs: Add async buffered write support
xfs: Specify lockmode when calling xfs_ilock_for_iomap()
io_uring: Add tracepoint for short writes
io_uring: fix issue with io_write() not always undoing sb_start_write()
io_uring: Add support for async buffered writes
fs: Add async write file modification handling.
fs: Split off inode_needs_update_time and __file_update_time
fs: add __remove_file_privs() with flags parameter
fs: add a FMODE_BUF_WASYNC flags for f_mode
iomap: Return -EAGAIN from iomap_write_iter()
iomap: Add async buffered write support
iomap: Add flags parameter to iomap_page_create()
mm: Add balance_dirty_pages_ratelimited_flags() function
mm: Move updates of dirty_exceeded into one place
mm: Move starting of background writeback into the main balancing loop
|
|
Pull io_uring updates from Jens Axboe:
- As per (valid) complaint in the last merge window, fs/io_uring.c has
grown quite large these days. io_uring isn't really tied to fs
either, as it supports a wide variety of functionality outside of
that.
Move the code to io_uring/ and split it into files that either
implement a specific request type, and split some code into helpers
as well. The code is organized a lot better like this, and io_uring.c
is now < 4K LOC (me).
- Deprecate the epoll_ctl opcode. It'll still work, just trigger a
warning once if used. If we don't get any complaints on this, and I
don't expect any, then we can fully remove it in a future release
(me).
- Improve the cancel hash locking (Hao)
- kbuf cleanups (Hao)
- Efficiency improvements to the task_work handling (Dylan, Pavel)
- Provided buffer improvements (Dylan)
- Add support for recv/recvmsg multishot support. This is similar to
the accept (or poll) support for have for multishot, where a single
SQE can trigger everytime data is received. For applications that
expect to do more than a few receives on an instantiated socket, this
greatly improves efficiency (Dylan).
- Efficiency improvements for poll handling (Pavel)
- Poll cancelation improvements (Pavel)
- Allow specifiying a range for direct descriptor allocations (Pavel)
- Cleanup the cqe32 handling (Pavel)
- Move io_uring types to greatly cleanup the tracing (Pavel)
- Tons of great code cleanups and improvements (Pavel)
- Add a way to do sync cancelations rather than through the sqe -> cqe
interface, as that's a lot easier to use for some use cases (me).
- Add support to IORING_OP_MSG_RING for sending direct descriptors to a
different ring. This avoids the usually problematic SCM case, as we
disallow those. (me)
- Make the per-command alloc cache we use for apoll generic, place
limits on it, and use it for netmsg as well (me).
- Various cleanups (me, Michal, Gustavo, Uros)
* tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits)
io_uring: ensure REQ_F_ISREG is set async offload
net: fix compat pointer in get_compat_msghdr()
io_uring: Don't require reinitable percpu_ref
io_uring: fix types in io_recvmsg_multishot_overflow
io_uring: Use atomic_long_try_cmpxchg in __io_account_mem
io_uring: support multishot in recvmsg
net: copy from user before calling __get_compat_msghdr
net: copy from user before calling __copy_msghdr
io_uring: support 0 length iov in buffer select in compat
io_uring: fix multishot ending when not polled
io_uring: add netmsg cache
io_uring: impose max limit on apoll cache
io_uring: add abstraction around apoll cache
io_uring: move apoll cache to poll.c
io_uring: consolidate hash_locked io-wq handling
io_uring: clear REQ_F_HASH_LOCKED on hash removal
io_uring: don't race double poll setting REQ_F_ASYNC_DATA
io_uring: don't miss setting REQ_F_DOUBLE_POLL
io_uring: disable multishot recvmsg
io_uring: only trace one of complete or overflow
...
|
|
Simplify:
#define ALIGN_STRUCTFIELD(type) ((int)(offsetof(struct {char a; type b;}, b)))
with
#define ALIGN_STRUCTFIELD(type) __alignof__(struct {type b;})
Which works just the same.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: David Laight <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These start a rework of the handling of trip points in the thermal
core, improve the cpufreq/devfreq cooling device handling, update some
thermal control drivers and the tmon utility and clean up code.
Specifics:
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to
be used by the different sensors when registering a thermal zone
(Daniel Lezcano).
- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba).
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn).
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3
(Wolfram Sang).
- Convert the QCom tsens DT binding to the dtsformat format
(Krzysztof Kozlowski).
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano).
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof).
- Fix array underflow in prep_lookup_table (Dan Carpenter).
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun).
- Fix typos in comments detected on sun8i by Coccinelle (Julia
Lawall).
- Fix typos in comments on rzg2l (Biju Das).
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li).
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov).
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer).
- Fix typo in the comments for the 'tmon' tool (Slark Xiao).
- Make the thermal core use ida_alloc()/free() directly instead of
ida_simple_get()/ida_simple_remove() that have been deprecated
(keliu).
- Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal
control driver (Rafael Wysocki)"
* tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including new CPU IDs for
the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
updates, documentation cleanups and a new version of the pm-graph
suite of utilities.
Specifics:
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq
policy which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
function parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello)"
* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
PM: QoS: Add check to make sure CPU freq is non-negative
PM: hibernate: defer device probing when resuming from hibernation
intel_idle: make SPR C1 and C1E be independent
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
pm-graph v5.9
cpufreq: Warn users while freeing active policy
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
PM: domains: Ensure genpd_debugfs_dir exists before remove
PM: runtime: Extend support for wakeirq for force_suspend|resume
...
|
|
Reference-putting functions should not access the object being put after
decrementing the refcount unless they reduce the refcount to zero.
Fix a couple of instances of this in afs by copying the information to be
logged by tracepoint to local variables before doing the decrement.
[Fixed a bit in afs_put_server() that I'd missed but Marc caught]
Fixes: 341f741f04be ("afs: Refcount the afs_call struct")
Fixes: 452181936931 ("afs: Trace afs_server usage")
Fixes: 977e5f8ed0ab ("afs: Split the usage count on struct afs_server")
Signed-off-by: David Howells <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/165911278430.3745403.16526310736054780645.stgit@warthog.procyon.org.uk/ # v1
|
|
Use refcount_t rather than atomic_t in afs to make use of the count
checking facilities provided.
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Marc Dionne <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/165911277768.3745403.423349776836296452.stgit@warthog.procyon.org.uk/ # v1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC drivers from Arnd Bergmann:
"The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management to
allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and use
the firmware interfaces for system power control and for power
capping"
* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
soc: a64fx-diag: disable modular build
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: fujitsu: Add A64FX diagnostic interrupt driver
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- An addition of 'accounted' flag to slab allocation tracepoints to
indicate memcg_kmem accounting, by Vasily
- An optimization of memcg handling in freeing paths, by Muchun
- Various smaller fixes and cleanups
* tag 'slab-for-5.20_or_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: move generic bulk alloc/free functions to SLOB
mm/sl[au]b: use own bulk free function when bulk alloc failed
mm: slab: optimize memcg_slab_free_hook()
mm/tracing: add 'accounted' entry into output of allocation tracepoints
tools/vm/slabinfo: Handle files in debugfs
mm/slub: Simplify __kmem_cache_alias()
mm, slab: fix bad alignments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Delay the cleanup of interrupted posix lock requests until the user
space result arrives. Previously, the immediate cleanup would lead to
extraneous warnings when the result arrived.
- Tracepoint improvements, e.g. adding the lock resource name.
- Delay the completion of lockspace creation until one full recovery
cycle has completed. This allows more error cases to be returned to
the caller.
- Remove warnings from the locking layer about delayed network replies.
The recently added midcomms warnings are much more useful.
- Begin the process of deprecating two unused lock-timeout-related
features. These features now require enabling via a Kconfig option,
and enabling them triggers deprecation warnings. We expect to remove
the code in v6.2.
* tag 'dlm-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: move kref_put assert for lkb structs
fs: dlm: don't use deprecated timeout features by default
fs: dlm: add deprecation Kconfig and warnings for timeouts
fs: dlm: remove timeout from dlm_user_adopt_orphan
fs: dlm: remove waiter warnings
fs: dlm: fix grammar in lowcomms output
fs: dlm: add comment about lkb IFL flags
fs: dlm: handle recovery result outside of ls_recover
fs: dlm: make new_lockspace() wait until recovery completes
fs: dlm: call dlm_lsop_recover_prep once
fs: dlm: update comments about recovery and membership handling
fs: dlm: add resource name to tracepoints
fs: dlm: remove additional dereference of lksb
fs: dlm: change ast and bast trace order
fs: dlm: change posix lock sigint handling
fs: dlm: use dlm_plock_info for do_unlock_close
fs: dlm: change plock interrupted message to debug again
fs: dlm: add pid to debug log
fs: dlm: plock use list_first_entry
|
|
alignof() gives an alignment of types as they would be as standalone
variables. But alignment in structures might be different, and when
building the fields of events, the alignment must be the actual
alignment otherwise the field offsets may not match what they actually
are.
This caused trace-cmd to crash, as libtraceevent did not check if the
field offset was bigger than the event. The write_msr and read_msr
events on 32 bit had their fields incorrect, because it had a u64 field
between two ints. alignof(u64) would give 8, but the u64 field was at a
4 byte alignment.
Define a macro as:
ALIGN_STRUCTFIELD(type) ((int)(offsetof(struct {char a; type b;}, b)))
which gives the actual alignment of types in a structure.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: [email protected]
Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Per task wakeup while not running (wwnr) monitor.
This model is broken, the reason is that a task can be running in the
processor without being set as RUNNABLE. Think about a task about to
sleep:
1: set_current_state(TASK_UNINTERRUPTIBLE);
2: schedule();
And then imagine an IRQ happening in between the lines one and two,
waking the task up. BOOM, the wakeup will happen while the task is
running.
Q: Why do we need this model, so?
A: To test the reactors.
Link: https://lkml.kernel.org/r/473c0fc39967250fdebcff8b620311c11dccad30.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Gabriele Paoloni <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Tao Zhou <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The wakeup in preemptive (wip) monitor verifies if the
wakeup events always take place with preemption disabled:
|
|
v
#==================#
H preemptive H <+
#==================# |
| |
| preempt_disable | preempt_enable
v |
sched_waking +------------------+ |
+--------------- | | |
| | non_preemptive | |
+--------------> | | -+
+------------------+
The wakeup event always takes place with preemption disabled because
of the scheduler synchronization. However, because the preempt_count
and its trace event are not atomic with regard to interrupts, some
inconsistencies might happen.
The documentation illustrates one of these cases.
Link: https://lkml.kernel.org/r/c98ca678df81115fddc04921b3c79720c836b18f.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Gabriele Paoloni <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Tao Zhou <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
In Linux terms, the runtime verification monitors are encapsulated
inside the "RV monitor" abstraction. The "RV monitor" includes a set
of instances of the monitor (per-cpu monitor, per-task monitor, and
so on), the helper functions that glue the monitor to the system
reference model, and the trace output as a reaction for event parsing
and exceptions, as depicted below:
Linux +----- RV Monitor ----------------------------------+ Formal
Realm | | Realm
+-------------------+ +----------------+ +-----------------+
| Linux kernel | | Monitor | | Reference |
| Tracing | -> | Instance(s) | <- | Model |
| (instrumentation) | | (verification) | | (specification) |
+-------------------+ +----------------+ +-----------------+
| | |
| V |
| +----------+ |
| | Reaction | |
| +--+--+--+-+ |
| | | | |
| | | +-> trace output ? |
+------------------------|--|----------------------+
| +----> panic ?
+-------> <user-specified>
Add the rv/da_monitor.h, enabling automatic code generation for the
*Monitor Instance(s)* using C macros, and code to support it.
The benefits of the usage of macro for monitor synthesis are 3-fold as it:
- Reduces the code duplication;
- Facilitates the bug fix/improvement;
- Avoids the case of developers changing the core of the monitor code
to manipulate the model in a (let's say) non-standard way.
This initial implementation presents three different types of monitor
instances:
- DECLARE_DA_MON_GLOBAL(name, type)
- DECLARE_DA_MON_PER_CPU(name, type)
- DECLARE_DA_MON_PER_TASK(name, type)
The first declares the functions for a global deterministic automata monitor,
the second for monitors with per-cpu instances, and the third with per-task
instances.
Link: https://lkml.kernel.org/r/51b0bf425a281e226dfeba7401d2115d6091f84e.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Gabriele Paoloni <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Tao Zhou <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
If an instance of tracing enables the same trace event as another
instance, or the top level instance, or even perf, then the va_list passed
into some tracepoints can be used more than once.
As va_list can only be traversed once, this can cause issues:
# cat /sys/kernel/tracing/instances/qla2xxx/trace
cat-56106 [012] ..... 2419873.470098: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14: Entered (null).
cat-56106 [012] ..... 2419873.470101: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14: Entered ×+<96>²Ü<98>^H.
cat-56106 [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14: Prepare to issue mbox cmd=0xde589000.
# cat /sys/kernel/tracing/trace
cat-56106 [012] ..... 2419873.470097: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14: Entered qla2x00_get_firmware_state.
cat-56106 [012] ..... 2419873.470100: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14: Entered qla2x00_mailbox_command.
cat-56106 [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14: Prepare to issue mbox cmd=0x69.
The instance version is corrupted because the top level instance iterated
the va_list first.
Use va_copy() in the __assign_vstr() macro to make sure that each trace
event for each use case gets a fresh va_list.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 0563231f93c6d ("tracing/events: Add __vstring() and __assign_vstr() helper macros")
Reported-by: Arun Easi <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Record not only the number of pages requested, but the number of
pages that were actually allocated, to get a measure of progress
(or lack thereof).
Signed-off-by: Chuck Lever <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for 5.20-rc1 from Daniel Lezcano:
"- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba)
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn)
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3 (Wolfram
Sang)
- Convert the QCom tsens DT binding to the dtsformat format (Krzysztof
Kozlowski)
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano)
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof)
- Fix array underflow in prep_lookup_table (Dan Carpenter)
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun)
- Fix typos in comments detected on sun8i by Coccinelle (Julia Lawall)
- Fix typos in comments on rzg2l (Biju Das)
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li)
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov)
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer)
- Fix typo in the comments for the 'tmon' tool (Slark Xiao)
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to be
used by the different sensors when registering a thermal zone
(Daniel Lezcano)"
* tag 'thermal-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (36 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
|
|
|
|
'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Simplify the thermal_power_cpu_get_power trace event by removing
complicated cpumask and variable length array. Now the tools parsing trace
output don't have to hassle to get this power data. The simplified format
version uses 'policy->cpu'. Remove also the 'load' information completely
since there is very little value of it in this trace event. To get the
CPUs' load (or utilization) there are other dedicated trace hooks in the
kernel. This patch also simplifies and speeds-up the main cooling code
when that trace event is enabled.
Rename the trace event to avoid confusion of tools which parse the trace
file.
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Lukasz Luba <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
When debugging a reference counting issue with ordered extents, I've found
we're lacking a lot of tracepoint coverage in the ordered extent code.
Close these gaps by adding tracepoints after every refcount_inc() in the
ordered extent code.
Reviewed-by: Boris Burkov <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Johannes Thumshirn <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Add tracepoint for better insight to how the RAID56 data are submitted.
The output looks like this: (trace event header and UUID skipped)
raid56_read_partial: full_stripe=389152768 devid=3 type=DATA1 offset=32768 opf=0x0 physical=323059712 len=32768
raid56_read_partial: full_stripe=389152768 devid=1 type=DATA2 offset=0 opf=0x0 physical=67174400 len=65536
raid56_write_stripe: full_stripe=389152768 devid=3 type=DATA1 offset=0 opf=0x1 physical=323026944 len=32768
raid56_write_stripe: full_stripe=389152768 devid=2 type=PQ1 offset=0 opf=0x1 physical=323026944 len=32768
The above debug output is from a 32K data write into an empty RAID56
data chunk.
Some explanation on the event output:
full_stripe: the logical bytenr of the full stripe
devid: btrfs devid
type: raid stripe type.
DATA1: the first data stripe
DATA2: the second data stripe
PQ1: the P stripe
PQ2: the Q stripe
offset: the offset inside the stripe.
opf: the bio op type
physical: the physical offset the bio is for
len: the length of the bio
The first two lines are from partial RMW read, which is reading the
remaining data stripes from disks.
The last two lines are for full stripe RMW write, which is writing the
involved two 16K stripes (one for DATA1 stripe, one for P stripe).
The stripe for DATA2 doesn't need to be written.
There are 5 types of trace events:
- raid56_read_partial
Read remaining data for regular read/write path.
- raid56_write_stripe
Write the modified stripes for regular read/write path.
- raid56_scrub_read_recover
Read remaining data for scrub recovery path.
- raid56_scrub_write_stripe
Write the modified stripes for scrub path.
- raid56_scrub_read
Read remaining data for scrub path.
Also, since the trace events are included at super.c, we have to export
needed structure definitions to 'raid56.h' and include the header in
super.c, or we're unable to access those members.
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
[ reformat comments ]
Signed-off-by: David Sterba <[email protected]>
|
|
This adds the io_uring_short_write tracepoint to io_uring. A short write
is issued if not all pages that are required for a write are in the page
cache and the async buffered writes have to return EAGAIN.
Signed-off-by: Stefan Roesch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Make the trace format consistent with io_uring_complete for cflags
Signed-off-by: Dylan Yudaken <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
This is useful for investigating if task_work is batching
Signed-off-by: Dylan Yudaken <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
We have lots of trace events accepting an io_uring request and wanting
to print some of its fields like user_data, opcode, flags and so on.
However, as trace points were unaware of io_uring structures, we had to
pass all the fields as arguments. Teach trace/events/io_uring.h about
struct io_kiocb and stop the misery of passing a horde of arguments to
trace helpers.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/40ff72f92798114e56d400f2b003beb6cde6ef53.1655384063.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
trace_spmi_write_begin() and trace_spmi_read_end() both call
memcpy() with a length of "len + 1". This leads to one extra
byte being read beyond the end of the specified buffer. Fix
this out-of-bound memory access by using a length of "len"
instead.
Here is a KASAN log showing the issue:
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234
Read of size 2 at addr ffffffc0265b7540 by task [email protected]/1314
...
Call trace:
dump_backtrace+0x0/0x3e8
show_stack+0x2c/0x3c
dump_stack_lvl+0xdc/0x11c
print_address_description+0x74/0x384
kasan_report+0x188/0x268
kasan_check_range+0x270/0x2b0
memcpy+0x90/0xe8
trace_event_raw_event_spmi_read_end+0x1d0/0x234
spmi_read_cmd+0x294/0x3ac
spmi_ext_register_readl+0x84/0x9c
regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi]
_regmap_raw_read+0x40c/0x754
regmap_raw_read+0x3a0/0x514
regmap_bulk_read+0x418/0x494
adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3]
...
__arm64_sys_read+0x4c/0x60
invoke_syscall+0x80/0x218
el0_svc_common+0xec/0x1c8
...
addr ffffffc0265b7540 is located in stack of task [email protected]/1314 at offset 32 in frame:
adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3]
this frame has 1 object:
[32, 33) 'status'
Memory state around the buggy address:
ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00
^
ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00
==================================================================
Fixes: a9fce374815d ("spmi: add command tracepoints for SPMI")
Cc: [email protected]
Reviewed-by: Stephen Boyd <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: David Collins <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Bart Van Assche <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Fred Herard <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
There's several places that open code the following logic:
TP_STRUCT__entry(__dynamic_array(char, msg, MSG_MAX)),
TP_fast_assign(vsnprintf(__get_str(msg), MSG_MAX, vaf->fmt, *vaf->va);)
To load a string created by variable array va_list.
The main issue with this approach is that "MSG_MAX" usage in the
__dynamic_array() portion. That actually just reserves the MSG_MAX in the
event, and even wastes space because there's dynamic meta data also saved
in the event to denote the offset and size of the dynamic array. It would
have been better to just use a static __array() field.
Instead, create __vstring() and __assign_vstr() that work like __string
and __assign_str() but instead of taking a destination string to copy,
take a format string and a va_list pointer and fill in the values.
It uses the helper:
#define __trace_event_vstr_len(fmt, va) \
({ \
va_list __ap; \
int __ret; \
\
va_copy(__ap, *(va)); \
__ret = vsnprintf(NULL, 0, fmt, __ap) + 1; \
va_end(__ap); \
\
min(__ret, TRACE_EVENT_STR_MAX); \
})
To figure out the length to store the string. It may be slightly slower as
it needs to run the vsnprintf() twice, but it now saves space on the ring
buffer.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Dennis Dalessandro <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Cc: Kalle Valo <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Arend van Spriel <[email protected]>
Cc: Franky Lin <[email protected]>
Cc: Hante Meuleman <[email protected]>
Cc: Gregory Greenman <[email protected]>
Cc: Peter Chen <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Mathias Nyman <[email protected]>
Cc: Chunfeng Yun <[email protected]>
Cc: Bin Liu <[email protected]>
Cc: Marek Lindner <[email protected]>
Cc: Simon Wunderlich <[email protected]>
Cc: Antonio Quartulli <[email protected]>
Cc: Sven Eckelmann <[email protected]>
Cc: Johannes Berg <[email protected]>
Cc: Jim Cromie <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The dev field of the neigh_create event uses __dynamic_array() with a
fixed size, which defeats the purpose of __dynamic_array(). Looking at the
logic, as it already uses __assign_str(), just use the same logic in
__string to create the size needed. It appears that because "dev" can be
NULL, it needs the check. But __string() can have the same checks as
__assign_str() so use them there too.
Link: https://lkml.kernel.org/r/[email protected]
Cc: David Ahern <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: [email protected]
Acked-by: Jakub Kicinski <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The fib_lookup_table and fib6_lookup_table events declare name as a
dynamic_array, but also give it a fixed size, which defeats the purpose of
the dynamic array, especially since the dynamic array also includes meta
data in the event to specify its size.
Since the size of the name is at most 16 bytes (defined by IFNAMSIZ),
it is not worth spending the effort to determine the size of the string.
Just use a fixed size array and copy into it. This will save 4 bytes that
are used for the meta data that saves the size and position of a dynamic
array, and even slightly speed up the event processing.
Link: https://lkml.kernel.org/r/[email protected]
Cc: David S. Miller <[email protected]>
Cc: [email protected]
Acked-by: Jakub Kicinski <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
This header file is private to the Intel IOMMU driver. Move it to the
driver folder.
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Steve Wahl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
include/net/sock.h
310731e2f161 ("net: Fix data-races around sysctl_mem.")
e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"")
https://lore.kernel.org/all/[email protected]/
net/ipv4/fib_semantics.c
747c14307214 ("ip: fix dflt addr selection for connected nexthop")
d62607c3fe45 ("net: rename reference+tracking helpers")
net/tls/tls.h
include/net/tls.h
3d8c51b25a23 ("net/tls: Check for errors in tls_device_init")
587903142308 ("tls: create an internal header")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to 66e4c8d95008 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
|
|
The trace event devlink_trap_report uses the __dynamic_array() macro to
determine the size of the input_dev_name field. This is because it needs
to test the dev field for NULL, and will use "NULL" if it is. But it also
has the size of the dynamic array as a fixed IFNAMSIZ bytes. This defeats
the purpose of the dynamic array, as this will reserve that amount of
bytes on the ring buffer, and to make matters worse, it will even save
that size in the event as the event expects it to be dynamic (for which it
is not).
Since IFNAMSIZ is just 16 bytes, just make it a static array and this will
remove the meta data from the event that records the size.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Leon Romanovsky <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: [email protected]
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the 'mode' and
'mode_flags' arguments of nilfs_btnode_submit_block into a single
argument 'opf'.
Reviewed-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Commit 2a222ca992c3 ("fs: have submit_bh users pass in op and flags
separately") renamed the jbd2_write_superblock() 'write_op' argument into
'write_flags'. Propagate this change to the jbd2_write_superblock()
callers. Additionally, change the type of 'write_flags' into blk_opf_t.
Cc: Mike Christie <[email protected]>
Cc: Theodore Ts'o <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Cc: Jaegeuk Kim <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
semicolon
Remove extra semicolon.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Tejun Heo <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Li kunyu <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer
and then dereferences it in the TP_printk() portion. This is unsafe as the
TP_printk() portion is executed at the time the buffer is read. That is,
it can be seconds, minutes, days, months, even years later. If the proto
is freed, then this dereference will can also lead to a kernel crash.
Instead, save the sysctl_mem array into the ring buffer and have the
TP_printk() reference that instead. This is the proper and safe way to
read pointers in trace events.
Link: https://lore.kernel.org/all/[email protected]/
Cc: [email protected]
Fixes: 3847ce32aea9f ("core: add tracepoints for queueing skb to rcvbuf")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm SCMI updates for v5.20
The main additions this time around are:
1. The capability to trace full SCMI message headers and payloads.
The recent unearthing of chain of old firmware issues motivated
this effort so that it is easier to trace them and debug quicker
than it took this time around in absence of such tracing.
2. SCMI System power control driver to handle platform's requests for a
graceful shutdown. Though the system power control protocol has been
around since the begining of SCMI, it lacked the timeout information
that was added in SCMI v3.1 that enables kernel to take appropriate
action within the timeout and doesn't have to rely on any other
user inputs(which was blocking factor for addition of this driver
earlier)
3. Support for SCMI Power Capping protocol that was introduced in SCMI v3.1
This protocol is intended for controlling and monitoring the power
consumption of power capping domains. The firmware also provides the
hierarchy of powercap domains by providing parent domain information.
It also contains a bug fix in the old SCPI driver addressing possible
user-after-free issues.
* tag 'scmi-updates-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use fast channel tracing
include: trace: Add SCMI fast channel tracing
firmware: arm_scmi: Add SCMI v3.1 powercap fast channels support
firmware: arm_scmi: Generalize the fast channel support
firmware: arm_scmi: Add SCMI v3.1 powercap protocol basic support
dt-bindings: firmware: arm,scmi: Add support for powercap protocol
firmware: arm_scmi: Add SCMI System Power Control driver
firmware: arm_scmi: Add devm_protocol_acquire helper
firmware: arm_scmi: Add SCMI v3.1 System Power extensions
firmware: arm_scmi: Support only one single system power device
firmware: arm_scmi: Use new SCMI full message tracing
include: trace: Add SCMI full message tracing
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Slab caches marked with SLAB_ACCOUNT force accounting for every
allocation from this cache even if __GFP_ACCOUNT flag is not passed.
Unfortunately, at the moment this flag is not visible in ftrace output,
and this makes it difficult to analyze the accounted allocations.
This patch adds boolean "accounted" entry into trace output,
and set it to 'true' for calls used __GFP_ACCOUNT flag and
for allocations from caches marked with SLAB_ACCOUNT.
Set it to 'false' if accounting is disabled in configs.
Signed-off-by: Vasily Averin <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Acked-by: Muchun Song <[email protected]>
Reviewed-by: Hyeonggon Yoo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vlastimil Babka <[email protected]>
|
|
All the currently defined SCMI events are meant to trace only regular SCMI
transfers based on SCMI messages exchanges; SCMI transactions based on
fast channels, where used, are completely invisible from the tracing point
of view.
Add support to trace fast channel transactions; while doing that avoid
exposing full shared memory location addresses.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add a distinct trace event to dump full SCMI message headers and payloads.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
This adds a tracepoint event for 9p fid lifecycle tracing: when a fid
is created, its reference count increased/decreased, and freed.
The new 9p_fid_ref tracepoint should help anyone wishing to debug any
fid problem such as missing clunk (destroy) or use-after-free.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Dominique Martinet <[email protected]>
|
|
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The following commits added support for printing the real address-
65875073eddd ("net: use %px to print skb address in trace_netif_receive_skb")
70713dddf3d2 ("net_sched: introduce tracepoint trace_qdisc_enqueue()")
851f36e40962 ("net_sched: use %px to print skb address in trace_qdisc_dequeue()")
However, tracing the packet traversal shows a mix of hashes and real
addresses. Pasting a sample trace for reference-
ping-14249 [002] ..... 3424.046612: netif_rx_entry: dev=lo napi_id=0x3 queue_mapping=0
skbaddr=00000000dcbed83e vlan_tagged=0 vlan_proto=0x0000 vlan_tci=0x0000 protocol=0x0800
ip_summed=0 hash=0x00000000 l4_hash=0 len=84 data_len=0 truesize=768 mac_header_valid=1
mac_header=-14 nr_frags=0 gso_size=0 gso_type=0x0
ping-14249 [002] ..... 3424.046615: netif_rx: dev=lo skbaddr=ffffff888e5d1000 len=84
Switch the trace print formats to %p for all the events to have a
consistent format of printing the hashed addresses in all cases.
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|