| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
struct scsi_host_cmd_pool has already been declared. Remove the duplicate.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wan Jiabing <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
A kernel panic was observed due to a timing issue between the sync thread
and the initiator processing a login response from the target. The session
reopen can be invoked both from the session sync thread when iscsid
restarts and from iscsid through the error handler. Before the initiator
receives the response to a login, another reopen request can be sent from
the error handler/sync session. When the initial login response is
subsequently processed, the connection has been closed and the socket has
been released.
To fix this a new connection state, ISCSI_CONN_BOUND, is added:
- Set the connection state value to ISCSI_CONN_DOWN upon
iscsi_if_ep_disconnect() and iscsi_if_stop_conn()
- Set the connection state to the newly created value ISCSI_CONN_BOUND
after bind connection (transport->bind_conn())
- In iscsi_set_param(), return -ENOTCONN if the connection state is not
either ISCSI_CONN_BOUND or ISCSI_CONN_UP
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Gulam Mohamed <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
index 91074fd97f64..f4bf62b007a0 100644
|
|
s/infrastruture/infrastructure/
[mkp: combined .c and .h patches]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bhaskar Chowdhury <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
frog
|
|
Currently IOPOLL support is only available in block layer. This patch
adds mq_poll support to the SCSI layer.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Kashyap Desai <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
SCSI currently uses an atomic variable to track queue depth for each
attached device. The queue depth depends on many factors such as transport
type and device implementation. In addition, the SCSI device queue depth is
not a static entity but changes over time as a result of congestion
management.
While blk-mq currently tracks queue depth for each hctx, it can't easily be
changed to accommodate the SCSI per-device requirement.
The current approach of using an atomic variable doesn't scale well when
there are lots of CPU cores and the disk is very fast. IOPS can be
substantially impacted by the atomic in the hot path.
Replace the atomic variable sdev->device_busy with an sbitmap for tracking
the SCSI device queue depth.
It has been observed that IOPS is improved ~30% by this patchset in the
following test:
1) test machine(32 logical CPU cores)
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
NUMA node(s): 2
Model name: Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz
2) setup scsi_debug:
modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256
3) fio script:
fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \
--numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \
--loops=10000 --name=job1 --filename=/dev/sdN
[mkp: fix device_busy reference in mpt3sas]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/linux-block/[email protected]/
Cc: Omar Sandoval <[email protected]>
Cc: Kashyap Desai <[email protected]>
Cc: Sumanesh Samanta <[email protected]>
Cc: Ewan D. Milne <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: Sumanesh Samanta <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add scsi_device_busy() helper to prepare drivers for tracking device queue
depth via sbitmap_queue.
Link: https://lore.kernel.org/r/[email protected]
Cc: Omar Sandoval <[email protected]>
Cc: Kashyap Desai <[email protected]>
Cc: Sumanesh Samanta <[email protected]>
Cc: Ewan D. Milne <[email protected]>
Tested-by: Sumanesh Samanta <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The following three fields of scsi_host_template are referenced in the SCSI
I/O submission hot path. Put them together in one cacheline:
- cmd_size
- queuecommand
- commit_rqs
Link: https://lore.kernel.org/r/[email protected]
Cc: Omar Sandoval <[email protected]>
Cc: Kashyap Desai <[email protected]>
Cc: Sumanesh Samanta <[email protected]>
Cc: Ewan D. Milne <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: Sumanesh Samanta <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Since SCSI is the only driver which requires dispatch budget move the token
from struct request to struct scsi_cmnd.
Link: https://lore.kernel.org/r/[email protected]
Cc: Omar Sandoval <[email protected]>
Cc: Kashyap Desai <[email protected]>
Cc: Sumanesh Samanta <[email protected]>
Cc: Ewan D. Milne <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: Sumanesh Samanta <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This patch just breaks out the code that calculates the number of SCSI cmds
that will be used for a SCSI session. It also adds a check that we don't go
over the host's can_queue value.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The purpose of the taskqueuelock was to handle the issue where a bad target
decides to send a R2T and before its data has been sent decides to send a
cmd response to complete the cmd. The following patches fix up the
frwd/back locks so they are taken from the queue/xmit (frwd) and completion
(back) paths again. To get there this patch removes the taskqueuelock which
for iSCSI xmit wq based drivers was taken in the queue, xmit and completion
paths.
Instead of the lock, we just make sure we have a ref to the task when we
queue a R2T, and then we always remove the task from the requeue list in
the xmit path or the forced cleanup paths.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
These variants were added for bisectability. Remove them, as all call sites
have now been convertd to use the original API.
Link: https://lore.kernel.org/r/[email protected]
Cc: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
All call-sites of below libsas APIs:
- sas_alloc_event()
- sas_notify_port_event()
- sas_notify_phy_event()
have been converted to use the _gfp()-suffixed version. Modify the
original APIs above to take a gfp_t flags parameter by default.
For bisectability, call-sites will be modified again to use the original
libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions
can then be removed.
Link: https://lore.kernel.org/r/[email protected]
Cc: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
sas_alloc_event() uses in_interrupt() to decide which allocation should be
used.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The in_interrupt() check is also only partially correct, because it fails
to choose the correct code path when just preemption or interrupts are
disabled. For example, as in the following call chain:
mvsas/mv_sas.c: mvs_work_queue() [process context]
spin_lock_irqsave(mvs_info::lock, )
-> libsas/sas_event.c: sas_notify_phy_event()
-> sas_alloc_event()
-> in_interrupt() = false
-> invalid GFP_KERNEL allocation
-> libsas/sas_event.c: sas_notify_port_event()
-> sas_alloc_event()
-> in_interrupt() = false
-> invalid GFP_KERNEL allocation
Introduce sas_alloc_event_gfp(), sas_notify_port_event_gfp(), and
sas_notify_phy_event_gfp(), which all behave like the non _gfp() variants
but use a caller-passed GFP mask for allocations.
For bisectability, all callers will be modified first to pass GFP context,
then the non _gfp() libsas API variants will be modified to take a gfp_t by
default.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost")
Cc: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
LLDDs report events to libsas with .notify_port_event and .notify_phy_event
callbacks.
These callbacks are fixed and so there is no reason why the functions
cannot be called directly, so do that.
This neatens the code slightly, makes it more obvious, and reduces function
pointer usage, which is generally a good thing. Downside is that there are
2x more symbol exports.
[[email protected]: Remove the now unused "sas_ha" local variables]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Ahmed S. Darwish <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add the missing 'set_status_byte()' accessor function.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Benjamin Block <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Use the standard SCSI message definitions instead of the driver-internal
ones.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add a new interface, fc_eh_should_retry_cmd(), which checks if the cmd
should be retried or not by checking the rport state. If the rport state is
marginal it returns false to make sure there won't be any retries on the
cmd.
Make the fc_remote_port_delete(), fc_user_scan_tgt(), and
fc_timeout_deleted_rport() functions handle the new rport state.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Muneendra Kumar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add a new optional routine, eh_should_retry_cmd(), in scsi_host_template
that allows the transport to decide if a cmd is retryable. Return true if
the transport is in a state the cmd should be retried on.
Update scmd_eh_abort_handler() and scsi_eh_flush_done_q() to both call
scsi_eh_should_retry_cmd() to check whether the command needs to be
retried.
The above changes were based on a patch by Mike Christie.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Muneendra Kumar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add code in scsi_result_to_blk_status to translate a new error
DID_TRANSPORT_MARGINAL to the corresponding blk_status_t i.e
BLK_STS_TRANSPORT.
Add DID_TRANSPORT_MARGINAL case to scsi_decide_disposition().
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Muneendra Kumar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
|
|
iSCSI NOPs are sometimes "lost", mistakenly sent to the user-land iscsid
daemon instead of handled in the kernel, as they should be, resulting in a
message from the daemon like:
iscsid: Got nop in, but kernel supports nop handling.
This can occur because of the new forward- and back-locks, and the fact
that an iSCSI NOP response can occur before processing of the NOP send is
complete. This can result in "conn->ping_task" being NULL in
iscsi_nop_out_rsp(), when the pointer is actually in the process of being
set.
To work around this, we add a new state to the "ping_task" pointer. In
addition to NULL (not assigned) and a pointer (assigned), we add the state
"being set", which is signaled with an INVALID pointer (using "-1").
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Most of this file is only used inside of libfc, so move it to where it is
actually used, with only fc_fill_fc_hdr() left inside of the header.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Under fc_host_statistics add statistics for Congestion Signals that are
delivered to the host as interrupt signals.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: James Smart <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Shyam Sundar <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Parse the incoming FPIN packets and update the host and rport FPIN
statistics based on the FPINs.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Reviewed-by: James Smart <[email protected]>
Signed-off-by: Shyam Sundar <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add a structure for holding FPIN statistics, for host & rport respectively,
and add associated sysfs nodes:
/sys/class/fc_host/hostXX/statistics/
/sys/class/fc_remote_ports/rport-XX\:Y-Z/statistics/
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: James Smart <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Shyam Sundar <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull more SCSI updates from James Bottomley:
"The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed.
The other main changes are two driver updates (arcmsr, pm80xx) and
assorted minor clean ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: qla2xxx: Fix return of uninitialized value in rval
scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands
scsi: sr: Initialize ->cmd_len
scsi: arcmsr: Update driver version to v1.50.00.02-20200819
scsi: arcmsr: Add support for ARC-1886 series RAID controllers
scsi: arcmsr: Fix device hot-plug monitoring timer stop
scsi: arcmsr: Remove unnecessary syntax
scsi: pm80xx: Driver version update
scsi: pm80xx: Increase the number of outstanding I/O supported to 1024
scsi: pm80xx: Remove DMA memory allocation for ccb and device structures
scsi: pm80xx: Increase number of supported queues
scsi: sym53c8xx_2: Fix sizeof() mismatch
scsi: isci: Fix a typo in a comment
scsi: qla4xxx: Fix inconsistent format argument type
scsi: myrb: Fix inconsistent format argument types
scsi: myrb: Remove redundant assignment to variable timeout
scsi: bfa: Fix error return in bfad_pci_init()
scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup()
scsi: snic: Simplify the return expression of svnic_cq_alloc()
scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc()
...
|
|
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
|
|
Rename scsi_init_io() to scsi_alloc_sgtables(), and ensure callers call
scsi_free_sgtables() to cleanup failures close to scsi_init_io() instead of
leaking it down the generic I/O submission path.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add Host and host template flag 'host_tagset' so hostwide tagset can be
shared on multiple reply queues after the SCSI device's reply queue is
converted to blk-mq hw queue.
[jpg: Update comment on .can_queue and add Scsi_Host.host_tagset]
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: John Garry <[email protected]>
Tested-by: Don Brace<[email protected]> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
trace-cmd report doesn't show events from target subsystem because
scsi_command_size() leaks through event format string:
[target:target_sequencer_start] function scsi_command_size not defined
[target:target_cmd_complete] function scsi_command_size not defined
Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't
help because an expression is used inside TP_printk(). trace-cmd event
parser doesn't understand minus sign inside [ ]:
Error: expected ']' but read '-'
Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated
field for CONTROL byte.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Roman Bolshakov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The request queue is currently run unconditionally in scsi_end_request() if
both target queue and host queue are ready.
Recently Long Li reported that cost of a queue run can be very heavy in
case of high queue depth. Improve this situation by only running the
request queue when this LUN is busy.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Long Li <[email protected]>
Tested-by: Long Li <[email protected]>
Tested-by: Kashyap Desai <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add 256GBit speed setting to the SCSI FC transport. This speed can be
reached via FC trunking techniques.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
scsi_host_find_tag() is used by the drivers to return a scsi command based
on the command tag. Typically it's used from the interrupt handler to fetch
the command associated with a value returned from hardware. Some drivers
like fnic or qla4xxx, however, also use it also to traverse outstanding
commands. With the current implementation scsi_host_find_tag() will return
commands even if they are not started (i.e. passed to the driver). This
will result in random errors with those drivers. With this patch
scsi_host_find_tag() will only return 'started' commands (i.e. commands
which have been passed to the drivers) thus avoiding the above issue. The
other use cases will be unaffected as the interrupt handler naturally will
only ever return 'started' requests.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Drop the repeated word "the" in a comment.
Link: https://lore.kernel.org/r/[email protected]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: [email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
According to 'include/scsi/scsi_transport_fc.h':
"Attributes are based on HBAAPI V2.0 definitions"
... so it seems sane to match the 'HBA Attribute Length' to them.
If we don't, the compiler complains that the copied data will be truncated.
Fixes the following W=1 kernel build warning(s):
In file included from include/linux/bitmap.h:9,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/percpu.h:7,
from include/scsi/libfc.h:13,
from drivers/scsi/libfc/fc_elsct.c:17:
In function ‘strncpy’,
inlined from ‘fc_ct_ms_fill.constprop’ at include/scsi/fc_encode.h:263:3:
include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 79 [-Wstringop-truncation]
297 | #define __underlying_strncpy __builtin_strncpy
| ^
include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
307 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
In function ‘strncpy’,
inlined from ‘fc_ct_ms_fill.constprop’ at include/scsi/fc_encode.h:275:3:
include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 79 [-Wstringop-truncation]
297 | #define __underlying_strncpy __builtin_strncpy
| ^
include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
307 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
:This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates.
There are no major core changes in this series apart from a
refactoring in scsi_lib.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
scsi: cxgb3i: Fix some leaks in init_act_open()
scsi: ibmvscsi: Make some functions static
scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
scsi: ufs: Fix WriteBooster flush during runtime suspend
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs-qcom: Fix scheduling while atomic issue
scsi: mpt3sas: Fix reply queue count in non RDPQ mode
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
scsi: vhost: Notify TCM about the maximum sg entries supported per command
scsi: qla2xxx: Remove return value from qla_nvme_ls()
scsi: qla2xxx: Remove an unused function
scsi: iscsi: Register sysfs for iscsi workqueue
scsi: scsi_debug: Parser tables and code interaction
scsi: core: Refactor scsi_mq_setup_tags function
scsi: core: Fix incorrect usage of shost_for_each_device
scsi: qla2xxx: Fix endianness annotations in source files
...
|
|
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member[1][2], introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in which
the sizeof operator is being incorrectly/erroneously applied to zero-length
arrays and the result is zero. Such instances may be hiding some bugs. So,
this work (flexible-array member conversions) will also help to get
completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200507192147.GA16206@embeddedor
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Leftover from cmd_list removal.
Link: https://lore.kernel.org/r/[email protected]
Fixes: c5a9707672fe ("scsi: core: Remove cmd_list functionality")
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set
the dma_pad value in the queue. Move the handling into those callers
instead of burdening the common code, and move the ->extra_len field
from struct request to struct scsi_cmnd.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Don't burden the common block code with with specifics of the libata DMA
draining mechanism. Instead move most of the code to the scsi midlayer.
That also means the nr_phys_segments adjustments in the blk-mq fast path
can go away entirely, given that SCSI never looks at nr_phys_segments
after mapping the request to a scatterlist.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
|
|
If an iSCSI connection happens to fail while the daemon isn't running (due
to a crash or for another reason), the kernel failure report is not
received. When the daemon restarts, there is insufficient kernel state in
sysfs for it to know that this happened. open-iscsi tries to reopen every
connection, but on different initiators, we'd like to know which
connections have failed.
There is session->state, but that has a different lifetime than an iSCSI
connection, so it doesn't directly reflect the connection state.
[mkp: typos]
Link: https://lore.kernel.org/r/[email protected]
Cc: Khazhismel Kumykov <[email protected]>
Suggested-by: Junho Ryu <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Call scsi_bios_ptable from scsi_partsize instead of requiring boilerplate
code in the callers. Also switch the calling convention to match that
of the ->bios_param instances calling this function, and use true/false
for the return value instead of the weird -1 convention.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Large queues of I/O to offline devices that are eventually submitted when
devices are unblocked result in a many repeated "rejecting I/O to offline
device" messages. These messages can fill up the dmesg buffer in crash
dumps so no useful prior messages remain. In addition, if a serial console
is used, the flood of messages can cause a hard lockup in the console code.
Introduce a flag indicating the message has already been logged for the
device, and reset the flag when scsi_device_set_state() changes the device
state.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart van Assche <[email protected]>
Signed-off-by: Ewan D. Milne <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Link: https://lore.kernel.org/r/f57b8ddf30397c2c7213e49634e5e9cbd4246368.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
iSCSI session destruction can be arbitrarily slow, since it might require
network operations and serialization inside the SCSI layer. This patch
adds a new user event to trigger the destruction work asynchronously,
releasing the rx_queue_mutex as soon as the operation is queued and before
it is performed. This change allows other operations to run in other
sessions in the meantime, removing one of the major iSCSI bottlenecks for
us.
To prevent the session from being used after the destruction request, we
remove it immediately from the sesslist. This simplifies the locking
required during the asynchronous removal.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Gabriel Krisman Bertazi <[email protected]>
Co-developed-by: Khazhismel Kumykov <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Frank Mayhar <[email protected]>
Signed-off-by: Khazhismel Kumykov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member[1][2], introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200224161406.GA21454@embeddedor
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Satish Kharat <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The current behavior of the SCSI core is to clear driver-private data
before preparing a request for submission to the SCSI LLD. Make it possible
for SCSI LLDs to disable clearing of driver-private data.
These hooks will be used by a later patch, namely "scsi: ufs: Let the SCSI
core allocate per-command UFS data".
Link: https://lore.kernel.org/r/[email protected]
Cc: Tomas Winkler <[email protected]>
Cc: Stanley Chu <[email protected]>
Cc: Bean Huo <[email protected]>
Cc: Avri Altman <[email protected]>
Cc: Can Guo <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Remove cmd_list functionality; no users left. With that the
scsi_put_command() becomes empty, so remove that one, too.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart van Assche <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add an iterator scsi_host_busy_iter() to traverse all busy commands. If
locking against concurrent command completions is required, it has to be
provided by the caller.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|