| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This drop reason can be used whenever an IPv6 packet
has a malformed extension header.
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Probably due to copy-paste error, the name of the arg is "init_val"
which is misleading, as the pointer is used to point to struct where to
store the current value. Rename it to "val" and change the arg comment
a bit on the way.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The driverinit param purpose is to serve the driver during init/reload
time to provide a value, either default or set by user.
Make sure that driver does not read value updated by user before the
reload is performed. Hold the new value in a separate struct and switch
it during reload.
Note that this is required to be eventually possible to call
devl_param_driverinit_value_get() without holding instance lock.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Eric Dumazet pointed out [0] that when we call skb_set_owner_r()
for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called,
resulting in a negative sk_forward_alloc.
We add a new helper which clones a skb and sets its owner only
when sk_rmem_schedule() succeeds.
Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv()
because tcp_send_synack() can make sk_forward_alloc negative before
ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases.
[0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/
Fixes: 323fbd0edf3f ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()")
Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
pull-request: bluetooth-next
- Add new PID/VID 0489:e0f2 for MT7921
- Add VID:PID 13d3:3529 for Realtek RTL8821CE
- Add CIS feature bits to controller information
- Set Per Platform Antenna Gain(PPAG) for Intel controllers
* tag 'for-net-next-2023-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)
Bluetooth: Make sure LE create conn cancel is sent when timeout
Bluetooth: Free potentially unfreed SCO connection
Bluetooth: hci_qca: get wakeup status from serdev device handle
Bluetooth: L2CAP: Fix potential user-after-free
Bluetooth: MGMT: add CIS feature bits to controller information
Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds
Bluetooth: HCI: Replace zero-length arrays with flexible-array members
Bluetooth: qca: Fix sparse warnings
Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921
Bluetooth: Fix issue with Actions Semi ATS2851 based devices
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d01 ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/[email protected]/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now handle_fragments() in OVS and TC have the similar code, and
this patch removes the duplicate code by moving the function
to nf_conntrack_ovs.
Note that skb_clear_hash(skb) or skb->ignore_df = 1 should be
done only when defrag returns 0, as it does in other places
in kernel.
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Aaron Conole <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are almost the same code in ovs_skb_network_trim() and
tcf_ct_skb_network_trim(), this patch extracts them into a function
nf_ct_skb_network_trim() and moves the function to nf_conntrack_ovs.
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Aaron Conole <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Userspace needs to know whether the adapter has feature support for
Connected Isochronous Stream - Central/Peripheral, so it can set up
LE Audio features accordingly.
Expose these feature bits as settings in MGMT controller info.
Signed-off-by: Pauli Virtanen <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Zero-length arrays are deprecated[1] and we are moving towards
adopting C99 flexible-array members instead. So, replace zero-length
arrays in a couple of structures with flex-array members.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [2].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2]
Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Current taprio software implementation is haunted by the shadow of the
igb/igc hardware model. It iterates over child qdiscs in increasing
order of TXQ index, therefore giving higher xmit priority to TXQ 0 and
lower to TXQ N. According to discussions with Vinicius, that is the
default (perhaps even unchangeable) prioritization scheme used for the
NICs that taprio was first written for (igb, igc), and we have a case of
two bugs canceling out, resulting in a functional setup on igb/igc, but
a less sane one on other NICs.
To the best of my understanding, taprio should prioritize based on the
traffic class, so it should really dequeue starting with the highest
traffic class and going down from there. We get to the TXQ using the
tc_to_txq[] netdev property.
TXQs within the same TC have the same (strict) priority, so we should
pick from them as fairly as we can. We can achieve that by implementing
something very similar to q->curband from multiq_dequeue().
Since igb/igc really do have TXQ 0 of higher hardware priority than
TXQ 1 etc, we need to preserve the behavior for them as well. We really
have no choice, because in txtime-assist mode, taprio is essentially a
software scheduler towards offloaded child tc-etf qdiscs, so the TXQ
selection really does matter (not all igb TXQs support ETF/SO_TXTIME,
says Kurt Kanzenbach).
To preserve the behavior, we need a capability bit so that taprio can
determine if it's running on igb/igc, or on something else. Because igb
doesn't offload taprio at all, we can't piggyback on the
qdisc_offload_query_caps() call from taprio_enable_offload(), but
instead we need a separate call which is also made for software
scheduling.
Introduce two static keys to minimize the performance penalty on systems
which only have igb/igc NICs, and on systems which only have other NICs.
For mixed systems, taprio will have to dynamically check whether to
dequeue using one prioritization algorithm or using the other.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add sock_init_data_uid() to explicitly initialize the socket uid.
To initialise the socket uid, sock_init_data() assumes a the struct
socket* sock is always embedded in a struct socket_alloc, used to
access the corresponding inode uid. This may not be true.
Examples are sockets created in tun_chr_open() and tap_open().
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are 2 classes of in-tree drivers currently:
- those who act upon struct tc_taprio_sched_entry :: gate_mask as if it
holds a bit mask of TXQs
- those who act upon the gate_mask as if it holds a bit mask of TCs
When it comes to the standard, IEEE 802.1Q-2018 does say this in the
second paragraph of section 8.6.8.4 Enhancements for scheduled traffic:
| A gate control list associated with each Port contains an ordered list
| of gate operations. Each gate operation changes the transmission gate
| state for the gate associated with each of the Port's traffic class
| queues and allows associated control operations to be scheduled.
In typically obtuse language, it refers to a "traffic class queue"
rather than a "traffic class" or a "queue". But careful reading of
802.1Q clarifies that "traffic class" and "queue" are in fact
synonymous (see 8.6.6 Queuing frames):
| A queue in this context is not necessarily a single FIFO data structure.
| A queue is a record of all frames of a given traffic class awaiting
| transmission on a given Bridge Port. The structure of this record is not
| specified.
i.o.w. their definition of "queue" isn't the Linux TX queue.
The gate_mask really is input into taprio via its UAPI as a mask of
traffic classes, but taprio_sched_to_offload() converts it into a TXQ
mask.
The breakdown of drivers which handle TC_SETUP_QDISC_TAPRIO is:
- hellcreek, felix, sja1105: these are DSA switches, it's not even very
clear what TXQs correspond to, other than purely software constructs.
Only the mqprio configuration with 8 TCs and 1 TXQ per TC makes sense.
So it's fine to convert these to a gate mask per TC.
- enetc: I have the hardware and can confirm that the gate mask is per
TC, and affects all TXQs (BD rings) configured for that priority.
- igc: in igc_save_qbv_schedule(), the gate_mask is clearly interpreted
to be per-TXQ.
- tsnep: Gerhard Engleder clarifies that even though this hardware
supports at most 1 TXQ per TC, the TXQ indices may be different from
the TC values themselves, and it is the TXQ indices that matter to
this hardware. So keep it per-TXQ as well.
- stmmac: I have a GMAC datasheet, and in the EST section it does
specify that the gate events are per TXQ rather than per TC.
- lan966x: again, this is a switch, and while not a DSA one, the way in
which it implements lan966x_mqprio_add() - by only allowing num_tc ==
NUM_PRIO_QUEUES (8) - makes it clear to me that TXQs are a purely
software construct here as well. They seem to map 1:1 with TCs.
- am65_cpsw: from looking at am65_cpsw_est_set_sched_cmds(), I get the
impression that the fetch_allow variable is treated like a prio_mask.
This definitely sounds closer to a per-TC gate mask rather than a
per-TXQ one, and TI documentation does seem to recomment an identity
mapping between TCs and TXQs. However, Roger Quadros would like to do
some testing before making changes, so I'm leaving this driver to
operate as it did before, for now. Link with more details at the end.
Based on this breakdown, we have 5 drivers with a gate mask per TC and
4 with a gate mask per TXQ. So let's make the gate mask per TXQ the
opt-in and the gate mask per TC the default.
Benefit from the TC_QUERY_CAPS feature that Jakub suggested we add, and
query the device driver before calling the proper ndo_setup_tc(), and
figure out if it expects one or the other format.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/#25193204
Cc: Horatiu Vultur <[email protected]>
Cc: Siddharth Vadapalli <[email protected]>
Cc: Roger Quadros <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Acked-by: Kurt Kanzenbach <[email protected]> # hellcreek
Reviewed-by: Gerhard Engleder <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The taprio qdisc does not currently pass the mqprio queue configuration
down to the offloading device driver. So the driver cannot act upon the
TXQ counts/offsets per TC, or upon the prio->tc map. It was probably
assumed that the driver only wants to offload num_tc (see
TC_MQPRIO_HW_OFFLOAD_TCS), which it can get from netdev_get_num_tc(),
but there's clearly more to the mqprio configuration than that.
I've considered 2 mechanisms to remedy that. First is to pass a struct
tc_mqprio_qopt_offload as part of the tc_taprio_qopt_offload. The second
is to make taprio actually call TC_SETUP_QDISC_MQPRIO, *in addition to*
TC_SETUP_QDISC_TAPRIO.
The difference is that in the first case, existing drivers (offloading
or not) all ignore taprio's mqprio portion currently, whereas in the
second case, we could control whether to call TC_SETUP_QDISC_MQPRIO,
based on a new capability. The question is which approach would be
better.
I'm afraid that calling TC_SETUP_QDISC_MQPRIO unconditionally (not based
on a taprio capability bit) would risk introducing regressions. For
example, taprio doesn't populate (or validate) qopt->hw, as well as
mqprio.flags, mqprio.shaper, mqprio.min_rate, mqprio.max_rate.
In comparison, adding a capability is functionally equivalent to just
passing the mqprio in a way that drivers can ignore it, except it's
slightly more complicated to use it (need to set the capability).
Ultimately, what made me go for the "mqprio in taprio" variant was that
it's easier for offloading drivers to interpret the mqprio qopt slightly
differently when it comes from taprio vs when it comes from mqprio,
should that ever become necessary.
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
mqprio_parse_opt() proudly has a comment:
/* If hardware offload is requested we will leave it to the device
* to either populate the queue counts itself or to validate the
* provided queue counts.
*/
Unfortunately some device drivers did not get this memo, and don't
validate the queue counts, or populate them.
In case drivers don't want to populate the queue counts themselves, just
act upon the requested configuration, it makes sense to introduce a tc
capability, and make mqprio query it, so they don't have to do the
validation themselves.
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since mqprio is a scheduler and not a classifier, move its offload
structure to pkt_sched.h, where struct tc_taprio_qopt_offload also lies.
Also update some header inclusions in drivers that access this
structure, to the best of my abilities.
Cc: Igor Russkikh <[email protected]>
Cc: Yisen Zhuang <[email protected]>
Cc: Salil Mehta <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Saeed Mahameed <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Cc: Horatiu Vultur <[email protected]>
Cc: Lars Povlsen <[email protected]>
Cc: Steen Hegelund <[email protected]>
Cc: Daniel Machon <[email protected]>
Cc: [email protected]
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We use BH context only for synchronization, so we don't care if it's
actually serving softirq or not.
As a side node, in case of threaded NAPI, in_serving_softirq() will
return false because it's in process context with BH off, making
page_pool_recycle_in_cache() unreachable.
Signed-off-by: Qingfang DENG <[email protected]>
Tested-by: Felix Fietkau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some applications seem to rely on RAW sockets.
If they use private netns, we can avoid piling all RAW
sockets bound to a given protocol into a single bucket.
Also place (struct raw_hashinfo).lock into its own
cache line to limit false sharing.
Alternative would be to have per-netns hashtables,
but this seems too expensive for most netns
where RAW sockets are not used.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Modify flow table offload to cache the last ct info status that was passed
to the driver offload callbacks by extending enum nf_flow_flags with new
"NF_FLOW_HW_ESTABLISHED" flag. Set the flag if ctinfo was 'established'
during last act_ct meta actions fill call. This infrastructure change is
necessary to optimize promoting of UDP connections from 'new' to
'established' in following patches in this series.
Signed-off-by: Vlad Buslov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Modify flow table offload to support unidirectional connections by
extending enum nf_flow_flags with new "NF_FLOW_HW_BIDIRECTIONAL" flag. Only
offload reply direction when the flag is set. This infrastructure change is
necessary to support offloading UDP NEW connections in original direction
in following patches in series.
Signed-off-by: Vlad Buslov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In the unlikely case incoming packets are dropped because
of IP_MINTTL / IPV6_MINHOPCOUNT constraints...
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
A summary of the flags being set for various drivers is given below.
Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features
that can be turned off and on at runtime. This means that these flags
may be set and unset under RTNL lock protection by the driver. Hence,
READ_ONCE must be used by code loading the flag value.
Also, these flags are not used for synchronization against the availability
of XDP resources on a device. It is merely a hint, and hence the read
may race with the actual teardown of XDP resources on the device. This
may change in the future, e.g. operations taking a reference on the XDP
resources of the driver, and in turn inhibiting turning off this flag.
However, for now, it can only be used as a hint to check whether device
supports becoming a redirection target.
Turn 'hw-offload' feature flag on for:
- netronome (nfp)
- netdevsim.
Turn 'native' and 'zerocopy' features flags on for:
- intel (i40e, ice, ixgbe, igc)
- mellanox (mlx5).
- stmmac
- netronome (nfp)
Turn 'native' features flags on for:
- amazon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2, enetc)
- funeth
- intel (igb)
- marvell (mvneta, mvpp2, octeontx2)
- mellanox (mlx4)
- mtk_eth_soc
- qlogic (qede)
- sfc
- socionext (netsec)
- ti (cpsw)
- tap
- tsnep
- veth
- xen
- virtio_net.
Turn 'basic' (tx, pass, aborted and drop) features flags on for:
- netronome (nfp)
- cavium (thunder)
- hyperv.
Turn 'redirect_target' feature flag on for:
- amanzon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2)
- intel (i40e, ice, igb, ixgbe)
- ti (cpsw)
- marvell (mvneta, mvpp2)
- sfc
- socionext (netsec)
- qlogic (qede)
- mellanox (mlx5)
- tap
- veth
- virtio_net
- xen
Reviewed-by: Gerhard Engleder <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Co-developed-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Marek Majtyka <[email protected]>
Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a Netlink spec-compatible family for netdevs.
This is a very simple implementation without much
thought going into it.
It allows us to reap all the benefits of Netlink specs,
one can use the generic client to issue the commands:
$ ./cli.py --spec netdev.yaml --dump dev_get
[{'ifindex': 1, 'xdp-features': set()},
{'ifindex': 2, 'xdp-features': {'basic', 'ndo-xmit', 'redirect'}},
{'ifindex': 3, 'xdp-features': {'rx-sg'}}]
the generic python library does not have flags-by-name
support, yet, but we also don't have to carry strings
in the messages, as user space can get the names from
the spec.
Acked-by: Jesper Dangaard Brouer <[email protected]>
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Co-developed-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Co-developed-by: Marek Majtyka <[email protected]>
Signed-off-by: Marek Majtyka <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/327ad9c9868becbe1e601b580c962549c8cd81f2.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Avoid possible synchronize_rcu() as part from the
kfree_rcu() call when 2nd arg is not provided.
Signed-off-by: Julian Anastasov <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The software pedit action didn't get the same love as some of the
other actions and it's still using spinlocks and shared stats in the
datapath.
Transition the action to rcu and percpu stats as this improves the
action's performance dramatically on multiple cpu deployments.
Reviewed-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Pedro Tammela <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
There are also quite some places in netfilter that may process IPv4 TCP
GSO packets, we need to replace them too.
In length_mt(), we have to use u_int32_t/int to accept skb_ip_totlen()
return value, otherwise it may overflow and mismatch. This change will
also help us add selftest for IPv4 BIG TCP in the following patch.
Note that we don't need to replace the one in tcpmss_tg4(), as it will
return if there is data after tcphdr in tcpmss_mangle_packet(). The
same in mangle_contents() in nf_nat_helper.c, it returns false when
skb->len + extra > 65535 in enlarge_skb().
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds three APIs to replace the iph->tot_len setting
and getting in all places where IPv4 BIG TCP packets may reach,
they will be used in the following patches.
Note that iph_totlen() will be used when iph is not in linear
data of the skb.
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Devlink features were introduced to disallow devlink reload calls of
userspace before the devlink was fully initialized. The reason for this
workaround was the fact that devlink reload was originally called
without devlink instance lock held.
However, with recent changes that converted devlink reload to be
performed under devlink instance lock, this is redundant so remove
devlink features entirely.
Note that mlx5 used this to enable devlink reload conditionally only
when device didn't act as multi port slave. Move the multi port check
into mlx5_devlink_reload_down() callback alongside with the other
checks preventing the device from reload in certain states.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Implement the core hooks in order to provide the softMAC layer support
for sending beacons. Coordinators may be requested to send beacons in a
beacon enabled PAN in order for the other devices around to self
discover the available PANs automatically.
Changing the channels is prohibited while a beacon operation is
ongoing.
The implementation uses a workqueue triggered at a certain interval
depending on the symbol duration for the current channel and the
interval order provided.
Sending beacons in response to a BEACON_REQ frame (ie. answering active
scans) is not yet supported.
This initial patchset has no security support (llsec).
Co-developed-by: David Girault <[email protected]>
Signed-off-by: David Girault <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
|
|
Parse user requests for sending beacons, start sending beacons at a
regular pace. If needed, the pace can be updated with a new request. The
process can also be interrupted at any moment.
The page and channel must be changed beforehands if needed. Interval
orders above 14 are reserved to tell a device it must answer BEACON_REQ
coming from another device as part of an active scan procedure and this
is not yet supported.
A netlink "beacon request" structure is created to list the
requirements.
Mac layers may now implement the ->send_beacons() and
->stop_beacons() hooks.
Co-developed-by: David Girault <[email protected]>
Signed-off-by: David Girault <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
|
|
For large ranges (outside of s16) the documentation currently
recommends open-coding the validation, but it's better to use
the NLA_POLICY_FULL_RANGE() or NLA_POLICY_FULL_RANGE_SIGNED()
policy validation instead; recommend that.
Signed-off-by: Johannes Berg <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/20230127084506.09f280619d64.I5dece85f06efa8ab0f474ca77df9e26d3553d4ab@changeid
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2023-01-28
We've added 124 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 6386 insertions(+), 1827 deletions(-).
The main changes are:
1) Implement XDP hints via kfuncs with initial support for RX hash and
timestamp metadata kfuncs, from Stanislav Fomichev and
Toke Høiland-Jørgensen.
Measurements on overhead: https://lore.kernel.org/bpf/[email protected]
2) Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case, from Andrii Nakryiko.
3) Significantly reduce the search time for module symbols by livepatch
and BPF, from Jiri Olsa and Zhen Lei.
4) Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs
in different time intervals, from David Vernet.
5) Fix several issues in the dynptr processing such as stack slot liveness
propagation, missing checks for PTR_TO_STACK variable offset, etc,
from Kumar Kartikeya Dwivedi.
6) Various performance improvements, fixes, and introduction of more
than just one XDP program to XSK selftests, from Magnus Karlsson.
7) Big batch to BPF samples to reduce deprecated functionality,
from Daniel T. Lee.
8) Enable struct_ops programs to be sleepable in verifier,
from David Vernet.
9) Reduce pr_warn() noise on BTF mismatches when they are expected under
the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien.
10) Describe modulo and division by zero behavior of the BPF runtime
in BPF's instruction specification document, from Dave Thaler.
11) Several improvements to libbpf API documentation in libbpf.h,
from Grant Seltzer.
12) Improve resolve_btfids header dependencies related to subcmd and add
proper support for HOSTCC, from Ian Rogers.
13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room()
helper along with BPF selftests, from Ziyang Xuan.
14) Simplify the parsing logic of structure parameters for BPF trampoline
in the x86-64 JIT compiler, from Pu Lehui.
15) Get BTF working for kernels with CONFIG_RUST enabled by excluding
Rust compilation units with pahole, from Martin Rodriguez Reboredo.
16) Get bpf_setsockopt() working for kTLS on top of TCP sockets,
from Kui-Feng Lee.
17) Disable stack protection for BPF objects in bpftool given BPF backends
don't support it, from Holger Hoffstätte.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits)
selftest/bpf: Make crashes more debuggable in test_progs
libbpf: Add documentation to map pinning API functions
libbpf: Fix malformed documentation formatting
selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata
selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket.
bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().
bpf/selftests: Verify struct_ops prog sleepable behavior
bpf: Pass const struct bpf_prog * to .check_member
libbpf: Support sleepable struct_ops.s section
bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable
selftests/bpf: Fix vmtest static compilation error
tools/resolve_btfids: Alter how HOSTCC is forced
tools/resolve_btfids: Install subcmd headers
bpf/docs: Document the nocast aliasing behavior of ___init
bpf/docs: Document how nested trusted fields may be defined
bpf/docs: Document cpumask kfuncs in a new file
selftests/bpf: Add selftest suite for cpumask kfuncs
selftests/bpf: Add nested trust selftests suite
bpf: Enable cpumasks to be queried and used as kptrs
bpf: Disallow NULLable pointers for trusted kfuncs
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
418e53401e47 ("ice: move devlink port creation/deletion")
643ef23bd9dd ("ice: Introduce local var for readability")
https://lore.kernel.org/all/[email protected]/
https://lore.kernel.org/all/[email protected]/
drivers/net/ethernet/engleder/tsnep_main.c
3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues")
25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/[email protected]/
net/netfilter/nf_conntrack_proto_sctp.c
13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths")
f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/[email protected]/
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 1d18bb1a4ddd ("devlink: allow registering parameters after
the instance") as the subject implies introduced possibility to register
devlink params even for already registered devlink instance. This is a
bit problematic, as the consistency or params list was originally
secured by the fact it is static during devlink lifetime. So in order to
protect the params list, take devlink instance lock during the params
operations. Introduce unlocked function variants and use them in drivers
in locked context. Put lock assertions to appropriate places.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
devlink_param_driverinit_value_set() currently returns int with possible
error, but no user is checking it anyway. The only reason for a fail is
a driver bug. So convert the function to return void and put WARN_ONs
on error paths.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There is no user outside the devlink code, so remove the export and make
the functions static. Move them before callers to avoid forward
declarations.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This file is included by a lot of other commonly included
headers, it doesn't need socket.h or flow_dissector.h.
This reduces the size of this file after pre-processing
from 28165 to 4663.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
net/checksum.h pulls in linux/uaccess.h which is large.
In the x86 header the include seems to not be needed at all.
ARM on the other hand does not include uaccess.h, even tho
it calls access_ok().
In the generic implementation guard the include of linux/uaccess.h
with the same condition as the code that needs it.
With this change pre-processed net/checksum.h shrinks on x86
from 30616 lines to just 1193.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Users who want to share a single public IP address for outgoing connections
between several hosts traditionally reach for SNAT. However, SNAT requires
state keeping on the node(s) performing the NAT.
A stateless alternative exists, where a single IP address used for egress
can be shared between several hosts by partitioning the available ephemeral
port range. In such a setup:
1. Each host gets assigned a disjoint range of ephemeral ports.
2. Applications open connections from the host-assigned port range.
3. Return traffic gets routed to the host based on both, the destination IP
and the destination port.
An application which wants to open an outgoing connection (connect) from a
given port range today can choose between two solutions:
1. Manually pick the source port by bind()'ing to it before connect()'ing
the socket.
This approach has a couple of downsides:
a) Search for a free port has to be implemented in the user-space. If
the chosen 4-tuple happens to be busy, the application needs to retry
from a different local port number.
Detecting if 4-tuple is busy can be either easy (TCP) or hard
(UDP). In TCP case, the application simply has to check if connect()
returned an error (EADDRNOTAVAIL). That is assuming that the local
port sharing was enabled (REUSEADDR) by all the sockets.
# Assume desired local port range is 60_000-60_511
s = socket(AF_INET, SOCK_STREAM)
s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s.bind(("192.0.2.1", 60_000))
s.connect(("1.1.1.1", 53))
# Fails only if 192.0.2.1:60000 -> 1.1.1.1:53 is busy
# Application must retry with another local port
In case of UDP, the network stack allows binding more than one socket
to the same 4-tuple, when local port sharing is enabled
(REUSEADDR). Hence detecting the conflict is much harder and involves
querying sock_diag and toggling the REUSEADDR flag [1].
b) For TCP, bind()-ing to a port within the ephemeral port range means
that no connecting sockets, that is those which leave it to the
network stack to find a free local port at connect() time, can use
the this port.
IOW, the bind hash bucket tb->fastreuse will be 0 or 1, and the port
will be skipped during the free port search at connect() time.
2. Isolate the app in a dedicated netns and use the use the per-netns
ip_local_port_range sysctl to adjust the ephemeral port range bounds.
The per-netns setting affects all sockets, so this approach can be used
only if:
- there is just one egress IP address, or
- the desired egress port range is the same for all egress IP addresses
used by the application.
For TCP, this approach avoids the downsides of (1). Free port search and
4-tuple conflict detection is done by the network stack:
system("sysctl -w net.ipv4.ip_local_port_range='60000 60511'")
s = socket(AF_INET, SOCK_STREAM)
s.setsockopt(SOL_IP, IP_BIND_ADDRESS_NO_PORT, 1)
s.bind(("192.0.2.1", 0))
s.connect(("1.1.1.1", 53))
# Fails if all 4-tuples 192.0.2.1:60000-60511 -> 1.1.1.1:53 are busy
For UDP this approach has limited applicability. Setting the
IP_BIND_ADDRESS_NO_PORT socket option does not result in local source
port being shared with other connected UDP sockets.
Hence relying on the network stack to find a free source port, limits the
number of outgoing UDP flows from a single IP address down to the number
of available ephemeral ports.
To put it another way, partitioning the ephemeral port range between hosts
using the existing Linux networking API is cumbersome.
To address this use case, add a new socket option at the SOL_IP level,
named IP_LOCAL_PORT_RANGE. The new option can be used to clamp down the
ephemeral port range for each socket individually.
The option can be used only to narrow down the per-netns local port
range. If the per-socket range lies outside of the per-netns range, the
latter takes precedence.
UAPI-wise, the low and high range bounds are passed to the kernel as a pair
of u16 values in host byte order packed into a u32. This avoids pointer
passing.
PORT_LO = 40_000
PORT_HI = 40_511
s = socket(AF_INET, SOCK_STREAM)
v = struct.pack("I", PORT_HI << 16 | PORT_LO)
s.setsockopt(SOL_IP, IP_LOCAL_PORT_RANGE, v)
s.bind(("127.0.0.1", 0))
s.getsockname()
# Local address between ("127.0.0.1", 40_000) and ("127.0.0.1", 40_511),
# if there is a free port. EADDRINUSE otherwise.
[1] https://github.com/cloudflare/cloudflare-blog/blob/232b432c1d57/2022-02-connectx/connectx.py#L116
Reviewed-by: Marek Majkowski <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The struct device for ISM devices was part of struct smcd_dev. Move to
struct ism_dev, provide a new API call in struct smcd_ops, and convert
existing SMCD code accordingly.
Furthermore, remove struct smcd_dev from struct ism_dev.
This is the final part of a bigger overhaul of the interfaces between SMC
and ISM.
Signed-off-by: Stefan Raspl <[email protected]>
Signed-off-by: Jan Karcher <[email protected]>
Signed-off-by: Wenjia Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The ism module had SMC-D-specific code sprinkled across the entire module.
We are now consolidating the SMC-D-specific parts into the latter parts
of the module, so it becomes more clear what code is intended for use with
ISM, and which parts are glue code for usage in the context of SMC-D.
This is the fourth part of a bigger overhaul of the interfaces between SMC
and ISM.
Signed-off-by: Stefan Raspl <[email protected]>
Signed-off-by: Jan Karcher <[email protected]>
Signed-off-by: Wenjia Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We separate the code implementing the struct smcd_ops API in the ISM
device driver from the functions that may be used by other exploiters of
ISM devices.
Note: We start out small, and don't offer the whole breadth of the ISM
device for public use, as many functions are specific to or likely only
ever used in the context of SMC-D.
This is the third part of a bigger overhaul of the interfaces between SMC
and ISM.
Signed-off-by: Stefan Raspl <[email protected]>
Signed-off-by: Jan Karcher <[email protected]>
Signed-off-by: Wenjia Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Register the smc module with the new ism device driver API.
This is the second part of a bigger overhaul of the interfaces between SMC
and ISM.
Signed-off-by: Stefan Raspl <[email protected]>
Signed-off-by: Jan Karcher <[email protected]>
Signed-off-by: Wenjia Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a new API that allows other drivers to concurrently access ISM devices.
To do so, we introduce a new API that allows other modules to register for
ISM device usage. Furthermore, we move the GID to struct ism, where it
belongs conceptually, and rename and relocate struct smcd_event to struct
ism_event.
This is the first part of a bigger overhaul of the interfaces between SMC
and ISM.
Signed-off-by: Stefan Raspl <[email protected]>
Signed-off-by: Jan Karcher <[email protected]>
Signed-off-by: Wenjia Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This function is only used in net/ipv6/route.c and has no reason to be
visible outside of it.
Signed-off-by: Guillaume Nault <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/50706db7f675e40b3594d62011d9363dce32b92e.1674495822.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
First set of patches for v6.3. The most important change here is that
the old Wireless Extension user space interface is not supported on
Wi-Fi 7 devices at all. We also added a warning if anyone with modern
drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless
Extensions, everyone should switch to using nl80211 interface instead.
Static WEP support is removed, there wasn't any driver using that
anyway so there's no user impact. Otherwise it's smaller features and
fixes as usual.
Note: As mt76 had tricky conflicts due to the fixes in wireless tree,
we decided to merge wireless into wireless-next to solve them easily.
There should not be any merge problems anymore.
Major changes:
cfg80211
- remove never used static WEP support
- warn if Wireless Extention interface is used with cfg80211/mac80211 drivers
- stop supporting Wireless Extensions with Wi-Fi 7 devices
- support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting
rfkill
- add GPIO DT support
bitfield
- add FIELD_PREP_CONST()
mt76
- per-PHY LED support
rtw89
- support new Bluetooth co-existance version
rtl8xxxu
- support RTL8188EU
* tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (123 commits)
wifi: wireless: deny wireless extensions on MLO-capable devices
wifi: wireless: warn on most wireless extension usage
wifi: mac80211: drop extra 'e' from ieeee80211... name
wifi: cfg80211: Deduplicate certificate loading
bitfield: add FIELD_PREP_CONST()
wifi: mac80211: add kernel-doc for EHT structure
mac80211: support minimal EHT rate reporting on RX
wifi: mac80211: Add HE MU-MIMO related flags in ieee80211_bss_conf
wifi: mac80211: Add VHT MU-MIMO related flags in ieee80211_bss_conf
wifi: cfg80211: Use MLD address to indicate MLD STA disconnection
wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload
wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()
wifi: cfg80211: remove support for static WEP
wifi: rtl8xxxu: Dump the efuse only for untested devices
wifi: rtl8xxxu: Print the ROM version too
wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update()
wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter()
wifi: rtw88: Move register access from rtw_bf_assoc() outside the RCU
wifi: rtl8xxxu: Use a longer retry limit of 48
wifi: rtl8xxxu: Report the RSSI to the firmware
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add an area after the xdp_buff in struct xdp_buff_xsk that drivers can use
to stash extra information to use in metadata kfuncs. The maximum size of
24 bytes means the full xdp_buff_xsk structure will take up exactly two
cache lines (with the cb field spanning both). Also add a macro drivers can
use to check their own wrapping structs against the available size.
Cc: John Fastabend <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Jesper Dangaard Brouer <[email protected]>
Cc: Anatoly Burakov <[email protected]>
Cc: Alexander Lobakin <[email protected]>
Cc: Magnus Karlsson <[email protected]>
Cc: Maryam Tahhan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Define a new kfunc set (xdp_metadata_kfunc_ids) which implements all possible
XDP metatada kfuncs. Not all devices have to implement them. If kfunc is not
supported by the target device, the default implementation is called instead.
The verifier, at load time, replaces a call to the generic kfunc with a call
to the per-device one. Per-device kfunc pointers are stored in separate
struct xdp_metadata_ops.
Cc: John Fastabend <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Jesper Dangaard Brouer <[email protected]>
Cc: Anatoly Burakov <[email protected]>
Cc: Alexander Lobakin <[email protected]>
Cc: Magnus Karlsson <[email protected]>
Cc: Maryam Tahhan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
The DSA core is in charge of the ethtool_ops of the net devices
associated with switch ports, so in case a hardware driver supports the
MAC merge layer, DSA must pass the callbacks through to the driver.
Add support for precisely that.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The PCI and queue number info is missing in IRQ names.
Add PCI and queue number to IRQ names, to allow CPU affinity
tuning scripts to work.
Cc: [email protected]
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|