aboutsummaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2023-03-30Merge tag 'wireless-next-2023-03-30' of ↵Jakub Kicinski2-4/+112
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * TC offload support for drivers below mac80211 * reduced neighbor report (RNR) handling for AP mode * mac80211 mesh fast-xmit and fast-rx support * support for another mesh A-MSDU format (seems nobody got the spec right) Major driver changes: Kalle moved the drivers that were just plain C files in drivers/net/wireless/ to legacy/ and virtual/ dirs. hwsim * multi-BSSID support * some FTM support ath11k * MU-MIMO parameters support * ack signal support for management packets rtl8xxxu * support for RTL8710BU aka RTL8188GU chips rtw89 * support for various newer firmware APIs ath10k * enabled threaded NAPI on WCN3990 iwlwifi * lots of work for multi-link/EHT (wifi7) * hardware timestamping support for some devices/firwmares * TX beacon protection on newer hardware * tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits) wifi: clean up erroneously introduced file wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del() wifi: iwlwifi: separate AP link management queues wifi: iwlwifi: mvm: free probe_resp_data later wifi: iwlwifi: bump FW API to 75 for AX devices wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta wifi: iwlwifi: mvm: send full STA during HW restart wifi: iwlwifi: mvm: rework active links counting wifi: iwlwifi: mvm: update mac config when assigning chanctx wifi: iwlwifi: mvm: use the correct link queue wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta wifi: iwlwifi: mvm: fix station link data leak wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link wifi: iwlwifi: mvm: use appropriate link for rate selection wifi: iwlwifi: mvm: use the new lockdep-checking macros wifi: iwlwifi: mvm: remove chanctx WARN_ON wifi: iwlwifi: mvm: avoid sending MAC context for idle wifi: iwlwifi: mvm: remove only link-specific AP keys wifi: iwlwifi: mvm: skip inactive links wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-29ipv6: Remove in6addr_any alternatives.Kuniyuki Iwashima1-6/+3
Some code defines the IPv6 wildcard address as a local variable and use it with memcmp() or ipv6_addr_equal(). Let's use in6addr_any and ipv6_addr_any() instead. Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-29vsock: support sockmapBobby Eshleman1-0/+17
This patch adds sockmap support for vsock sockets. It is intended to be usable by all transports, but only the virtio and loopback transports are implemented. SOCK_STREAM, SOCK_DGRAM, and SOCK_SEQPACKET are all supported. Signed-off-by: Bobby Eshleman <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-28net: dst: Switch to rcuref_t reference countingThomas Gleixner2-10/+11
Under high contention dst_entry::__refcnt becomes a significant bottleneck. atomic_inc_not_zero() is implemented with a cmpxchg() loop, which goes into high retry rates on contention. Switch the reference count to rcuref_t which results in a significant performance gain. Rename the reference count member to __rcuref to reflect the change. The gain depends on the micro-architecture and the number of concurrent operations and has been measured in the range of +25% to +130% with a localhost memtier/memcached benchmark which amplifies the problem massively. Running the memtier/memcached benchmark over a real (1Gb) network connection the conversion on top of the false sharing fix for struct dst_entry::__refcnt results in a total gain in the 2%-5% range over the upstream baseline. Reported-by: Wangyang Guo <[email protected]> Reported-by: Arjan Van De Ven <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-28net: dst: Prevent false sharing vs. dst_entry:: __refcntWangyang Guo4-8/+15
dst_entry::__refcnt is highly contended in scenarios where many connections happen from and to the same IP. The reference count is an atomic_t, so the reference count operations have to take the cache-line exclusive. Aside of the unavoidable reference count contention there is another significant problem which is caused by that: False sharing. perf top identified two affected read accesses. dst_entry::lwtstate and rtable::rt_genid. dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into a seperate cacheline vs. the read mostly members located at the beginning of the struct. That prevents false sharing vs. the struct members in the first 64 bytes of the structure, but there is also dst_entry::lwtstate which is located after the reference count and in the same cache line. This member is read after a reference count has been acquired. struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a size of 112 bytes, which means that the struct members of rtable which follow the dst member share the same cache line as dst_entry::__refcnt. Especially rtable::rt_genid is also read by the contexts which have a reference count acquired already. When dst_entry:__refcnt is incremented or decremented via an atomic operation these read accesses stall. This was found when analysing the memtier benchmark in 1:100 mode, which amplifies the problem extremly. Move the rt[6i]_uncached[_list] members out of struct rtable and struct rt6_info into struct dst_entry to provide padding and move the lwtstate member after that so it ends up in the same cache line. The resulting improvement depends on the micro-architecture and the number of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached benchmark. [ tglx: Rearrange struct ] Signed-off-by: Wangyang Guo <[email protected]> Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-279p: Add additional debug flags and open modesEric Van Hensbergen1-0/+6
Add some additional debug flags to assist with debugging cache changes. Also add some additional open modes so we can track cache state in fids more directly. Signed-off-by: Eric Van Hensbergen <[email protected]>
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-24net: ieee802154: Handle limited devices with only datagram supportMiquel Raynal1-0/+3
Some devices, like HardMAC ones can be a bit limited in the way they handle mac commands. In particular, they might just not support it at all and instead only be able to transmit and receive regular data packets. In this case, they cannot be used for any of the internal management commands that we have introduced so far and must be flagged accordingly. Signed-off-by: Miquel Raynal <[email protected]> Acked-by: Alexander Aring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stefan Schmidt <[email protected]>
2023-03-24wifi: nl80211: make nl80211_send_chandef non-staticJaewan Kim1-0/+9
Expose nl80211_send_chandef functionality for mac80211_hwsim or vendor netlink can use it where needed. Signed-off-by: Jaewan Kim <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-03-24cfg80211: support RNR for EMA APAloka Dixit1-0/+19
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial list of nontransmitted BSSID profiles should include in the frame a Reduced Neighbor Report element carrying information for at least the nontransmitted BSSIDs that are not present in the Multiple BSSID element carried in that frame. Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above. Number of RNR elements must be more than or equal to the number of MBSSID elements. This attribute can be used only when EMA is enabled. Userspace is responsible for splitting the RNR into multiple elements such that each element excludes the non-transmitting profiles already included in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon will be generated by adding MBSSID and RNR elements at the same index. If the userspace provides more RNR elements than the number of MBSSID elements then these will be added in every EMA beacon. Signed-off-by: Aloka Dixit <[email protected]> Link: https://lore.kernel.org/r/[email protected] [Johannes: validate elements] Signed-off-by: Johannes Berg <[email protected]>
2023-03-23Merge branch 'main' of ↵Jakub Kicinski1-2/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Florian Westphal says: ==================== netfilter updates for net-next This pull request contains changes for the *net-next* tree. 1. Change IPv6 stack to keep conntrack references until ipsec policy checks are done, like ipv4, from Madhu Koriginja. This update was missed when IPv6 NAT support was added 10 years ago. 2. get rid of old 'compat' structure layout in nf_nat_redirect core and move the conversion to the only user that needs the old layout for abi reasons. From Jeremy Sowden. 3. Compact some common code paths in nft_redir, also from Jeremy. 4. Time to remove the 'default y' knob so iptables 32bit compat interface isn't compiled in by default anymore, from myself. 5. Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used. Also from myself. * 'main' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: keep conntrack reference until IPsecv6 policy checks are done xtables: move icmp/icmpv6 logic to xt_tcpudp netfilter: xtables: disable 32bit compat interface by default netfilter: nft_masq: deduplicate eval call-backs netfilter: nft_redir: use `struct nf_nat_range2` throughout and deduplicate eval call-backs ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-23mac802154: Handle received BEACON_REQMiquel Raynal1-0/+2
When performing an active scan, devices emit BEACON_REQ which must be answered by other PANs receiving the request, unless they are already passively sending beacons. Answering a beacon request becomes a duty when the user tells us to send beacons and the request provides an interval of 15. Signed-off-by: Miquel Raynal <[email protected]> Acked-by: Alexander Aring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stefan Schmidt <[email protected]>
2023-03-23mac802154: Handle active scanningMiquel Raynal1-1/+17
Active scan support is based on the current passive scan support, cheered up with beacon requests sent after every channel change. Co-developed-by: David Girault <[email protected]> Signed-off-by: David Girault <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Acked-by: Alexander Aring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stefan Schmidt <[email protected]>
2023-03-22net: Update an existing TCP congestion control algorithm.Kui-Feng Lee1-0/+3
This feature lets you immediately transition to another congestion control algorithm or implementation with the same name. Once a name is updated, new connections will apply this new algorithm. The purpose is to update a customized algorithm implemented in BPF struct_ops with a new version on the flight. The following is an example of using the userspace API implemented in later BPF patches. link = bpf_map__attach_struct_ops(skel->maps.ca_update_1); ....... err = bpf_link__update_map(link, skel->maps.ca_update_2); We first load and register an algorithm implemented in BPF struct_ops, then swap it out with a new one using the same name. After that, newly created connections will apply the updated algorithm, while older ones retain the previous version already applied. This patch also takes this chance to refactor the ca validation into the new tcp_validate_congestion_control() function. Cc: [email protected], Eric Dumazet <[email protected]> Signed-off-by: Kui-Feng Lee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-03-22Merge tag 'ipsec-libreswan-mlx5' of ↵Jakub Kicinski1-0/+5
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Leon Romanovsky says: ==================== Extend packet offload to fully support libreswan The following patches are an outcome of Raed's work to add packet offload support to libreswan [1]. The series includes: * Priority support to IPsec policies * Statistics per-SA (visible through "ip -s xfrm state ..." command) * Support to IKE policy holes * Fine tuning to acquire logic. [1] https://github.com/libreswan/libreswan/pull/986 Link: https://lore.kernel.org/all/[email protected] * tag 'ipsec-libreswan-mlx5' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5e: Update IPsec per SA packets/bytes count net/mlx5e: Use one rule to count all IPsec Tx offloaded traffic net/mlx5e: Support IPsec acquire default SA net/mlx5e: Allow policies with reqid 0, to support IKE policy holes xfrm: copy_to_user_state fetch offloaded SA packets/bytes statistics xfrm: add new device offload acquire flag net/mlx5e: Use chains for IPsec policy priority offload net/mlx5: fs_core: Allow ignore_flow_level on TX dest net/mlx5: fs_chains: Refactor to detach chains from tc usage ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-22Bluetooth: btintel: Iterate only bluetooth device ACPI entriesKiran K1-0/+1
Current flow interates over entire ACPI table entries looking for Bluetooth Per Platform Antenna Gain(PPAG) entry. This patch iterates over ACPI entries relvant to Bluetooth device only. Fixes: c585a92b2f9c ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)") Signed-off-by: Kiran K <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-03-22netfilter: nft_redir: use `struct nf_nat_range2` throughout and deduplicate ↵Jeremy Sowden1-2/+1
eval call-backs `nf_nat_redirect_ipv4` takes a `struct nf_nat_ipv4_multi_range_compat`, but converts it internally to a `struct nf_nat_range2`. Change the function to take the latter, factor out the code now shared with `nf_nat_redirect_ipv6`, move the conversion to the xt_REDIRECT module, and update the ipv4 range initialization in the nft_redir module. Replace a bare hex constant for 127.0.0.1 with a macro. Remove `WARN_ON`. `nf_nat_setup_info` calls `nf_ct_is_confirmed`: /* Can't setup nat info for confirmed ct. */ if (nf_ct_is_confirmed(ct)) return NF_ACCEPT; This means that `ct` cannot be null or the kernel will crash, and implies that `ctinfo` is `IP_CT_NEW` or `IP_CT_RELATED`. nft_redir has separate ipv4 and ipv6 call-backs which share much of their code, and an inet one switch containing a switch that calls one of the others based on the family of the packet. Merge the ipv4 and ipv6 ones into the inet one in order to get rid of the duplicate code. Const-qualify the `priv` pointer since we don't need to write through it. Assign `priv->flags` to the range instead of OR-ing it in. Set the `NF_NAT_RANGE_PROTO_SPECIFIED` flag once during init, rather than on every eval. Signed-off-by: Jeremy Sowden <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-03-22wifi: mac80211: generate EMA beacons in AP modeAloka Dixit1-0/+68
Add APIs to generate an array of beacons for an EMA AP (enhanced multiple BSSID advertisements), each including a single MBSSID element. EMA profile periodicity equals the count of elements. - ieee80211_beacon_get_template_ema_list() - Generate and return all EMA beacon templates. Drivers must call ieee80211_beacon_free_ema_list() to free the memory. No change in the prototype for the existing API, ieee80211_beacon_get_template(), which should be used for non-EMA AP. - ieee80211_beacon_get_template_ema_index() - Generate a beacon which includes the multiple BSSID element at the given index. Drivers can use this function in a loop until NULL is returned which indicates end of available MBSSID elements. - ieee80211_beacon_free_ema_list() - free the memory allocated for the list of EMA beacon templates. Modify existing functions ieee80211_beacon_get_ap(), ieee80211_get_mbssid_beacon_len() and ieee80211_beacon_add_mbssid() to accept a new parameter for EMA index. Signed-off-by: Aloka Dixit <[email protected]> Co-developed-by: John Crispin <[email protected]> Signed-off-by: John Crispin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-03-22wifi: mac80211: implement support for yet another mesh A-MSDU formatFelix Fietkau1-4/+7
MT7996 hardware supports mesh A-MSDU subframes in hardware, but uses a big-endian length field Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-03-22wifi: mac80211: add support for letting drivers register tc offload supportFelix Fietkau1-0/+9
On newer MediaTek SoCs (e.g. MT7986), WLAN->WLAN or WLAN->Ethernet flows can be offloaded by the SoC. In order to support that, the .ndo_setup_tc op is needed. Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-03-21neighbour: switch to standard rcu, instead of rcu_bhEric Dumazet4-16/+16
rcu_bh is no longer a win, especially for objects freed with standard call_rcu(). Switch neighbour code to no longer disable BH when not necessary. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-20xfrm: add new device offload acquire flagRaed Salem1-0/+5
During XFRM acquire flow, a default SA is created to be updated later, once acquire netlink message is handled in user space. When the relevant policy is offloaded this default SA is also offloaded to IPsec offload supporting driver, however this SA does not have context suitable for offloading in HW, nor is interesting to offload to HW, consequently needs a special driver handling apart from other offloaded SA(s). Add a special flag that marks such SA so driver can handle it correctly. Signed-off-by: Raed Salem <[email protected]> Link: https://lore.kernel.org/r/f5da0834d8c6b82ab9ba38bd4a0c55e71f0e3dab.1678714336.git.leon@kernel.org Acked-by: Steffen Klassert <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2023-03-18tcp: preserve const qualifier in tcp_sk()Eric Dumazet1-1/+1
We can change tcp_sk() to propagate its argument const qualifier, thanks to container_of_const(). We have two places where a const sock pointer has to be upgraded to a write one. We have been using const qualifier for lockless listeners to clearly identify points where writes could happen. Add tcp_sk_rw() helper to better document these. tcp_inbound_md5_hash(), __tcp_grow_window(), tcp_reset_check() and tcp_rack_reo_wnd() get an additional const qualififer for their @tp local variables. smc_check_reset_syn_req() also needs a similar change. Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-18x25: preserve const qualifier in [a]x25_sk()Eric Dumazet2-8/+2
We can change [a]x25_sk() to propagate their argument const qualifier, thanks to container_of_const(). Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-18af_unix: preserve const qualifier in unix_sk()Eric Dumazet1-4/+1
We can change unix_sk() to propagate its argument const qualifier, thanks to container_of_const(). We need to change dump_common_audit_data() 'struct unix_sock *u' local var to get a const attribute. Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-18raw: preserve const qualifier in raw_sk()Eric Dumazet1-4/+1
We can change raw_sk() to propagate const qualifier of its argument, thanks to container_of_const() Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-17ip_tunnel: Preserve pointer const in ip_tunnel_info_optsGavin Li1-5/+6
Change ip_tunnel_info_opts( ) from static function to macro to cast return value and preserve the const-ness of the pointer. Signed-off-by: Gavin Li <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-17vxlan: Expose helper vxlan_build_gbp_hdrGavin Li1-0/+19
The function vxlan_build_gbp_hdr will be used by other modules to build gbp option in vxlan header according to gbp flags. Signed-off-by: Gavin Li <[email protected]> Reviewed-by: Gavi Teitz <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Acked-by: Saeed Mahameed <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+11
net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/[email protected] tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-17ipv4: raw: constify raw_v4_match() socket argumentEric Dumazet1-1/+1
This clarifies raw_v4_match() intent. Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-17ipv6: raw: constify raw_v6_match() socket argumentEric Dumazet1-1/+1
This clarifies raw_v6_match() intent. Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-17ipv6: constify inet6_mc_check()Eric Dumazet1-1/+1
inet6_mc_check() is essentially a read-only function. Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-17inet: preserve const qualifier in inet_sk()Eric Dumazet1-4/+1
We can change inet_sk() to propagate const qualifier of its argument. This should avoid some potential errors caused by accidental (const -> not_const) promotion. Other helpers like tcp_sk(), udp_sk(), raw_sk() will be handled in separate patch series. v2: use container_of_const() as advised by Jakub and Linus Signed-off-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/netdev/[email protected]/ Link: https://lore.kernel.org/netdev/CAHk-=wiOf12nrYEF2vJMcucKjWPN-Ns_SW9fA7LwST_2Dzp7rw@mail.gmail.com/ Signed-off-by: David S. Miller <[email protected]>
2023-03-17vxlan: mdb: Add an internal flag to indicate MDB usageIdo Schimmel1-0/+1
Add an internal flag to indicate whether MDB entries are configured or not. Set the flag after installing the first MDB entry and clear it before deleting the last one. The flag will be consulted by the data path which will only perform an MDB lookup if the flag is set, thereby keeping the MDB overhead to a minimum when the MDB is not used. Another option would have been to use a static key, but it is global and not per-device, unlike the current approach. Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-17vxlan: mdb: Add MDB control path supportIdo Schimmel1-0/+5
Implement MDB control path support, enabling the creation, deletion, replacement and dumping of MDB entries in a similar fashion to the bridge driver. Unlike the bridge driver, each entry stores a list of remote VTEPs to which matched packets need to be replicated to and not a list of bridge ports. The motivating use case is the installation of MDB entries by a user space control plane in response to received EVPN routes. As such, only allow permanent MDB entries to be installed and do not implement snooping functionality, avoiding a lot of unnecessary complexity. Since entries can only be modified by user space under RTNL, use RTNL as the write lock. Use RCU to ensure that MDB entries and remotes are not freed while being accessed from the data path during transmission. In terms of uAPI, reuse the existing MDB netlink interface, but add a few new attributes to request and response messages: * IP address of the destination VXLAN tunnel endpoint where the multicast receivers reside. * UDP destination port number to use to connect to the remote VXLAN tunnel endpoint. * VXLAN VNI Network Identifier to use to connect to the remote VXLAN tunnel endpoint. Required when Ingress Replication (IR) is used and the remote VTEP is not a member of originating broadcast domain (VLAN/VNI) [1]. * Source VNI Network Identifier the MDB entry belongs to. Used only when the VXLAN device is in external mode. * Interface index of the outgoing interface to reach the remote VXLAN tunnel endpoint. This is required when the underlay destination IP is multicast (P2MP), as the multicast routing tables are not consulted. All the new attributes are added under the 'MDBA_SET_ENTRY_ATTRS' nest which is strictly validated by the bridge driver, thereby automatically rejecting the new attributes. [1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-3.2.2 Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-17net: mana: Add new MANA VF performance counters for easier troubleshootingShradha Gupta1-0/+18
Extended performance counter stats in 'ethtool -S <interface>' output for MANA VF to facilitate troubleshooting. Tested-on: Ubuntu22 Signed-off-by: Shradha Gupta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-15scm: fix MSG_CTRUNC setting condition for SO_PASSSECAlexander Mikhalitsyn1-1/+12
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS. For some reason we have no corresponding check for SO_PASSSEC. In the recvmsg(2) doc we have: MSG_CTRUNC indicates that some control data was discarded due to lack of space in the buffer for ancillary data. So, we need to set MSG_CTRUNC flag for all types of SCM. This change can break applications those don't check MSG_CTRUNC flag. Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Leon Romanovsky <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Alexander Mikhalitsyn <[email protected]> v2: - commit message was rewritten according to Eric's suggestion Acked-by: Paul Moore <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-15net/smc: Introduce explicit check for v2 supportStefan Raspl1-0/+1
Previously, v2 support was derived from a very specific format of the SEID as part of the SMC-D codebase. Make this part of the SMC-D device API, so implementers do not need to adhere to a specific SEID format. Signed-off-by: Stefan Raspl <[email protected]> Reviewed-and-tested-by: Jan Karcher <[email protected]> Reviewed-by: Wenjia Zhang <[email protected]> Signed-off-by: Wenjia Zhang <[email protected]> Reviewed-by: Tony Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-15neighbour: annotate lockless accesses to n->nud_stateEric Dumazet1-1/+1
We have many lockless accesses to n->nud_state. Before adding another one in the following patch, add annotations to readers and writers. Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Reviewed-by: Martin KaFai Lau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-14xdp: remove unused {__,}xdp_release_frame()Alexander Lobakin1-29/+0
__xdp_build_skb_from_frame() was the last user of {__,}xdp_release_frame(), which detaches pages from the page_pool. All the consumers now recycle Page Pool skbs and page, except mlx5, stmmac and tsnep drivers, which use page_pool_release_page() directly (might change one day). It's safe to assume this functionality is not needed anymore and can be removed (in favor of recycling). Signed-off-by: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-03-10xdp: add xdp_set_features_flag utility routineLorenzo Bianconi1-0/+11
Introduce xdp_set_features_flag utility routine in order to update dynamically xdp_features according to the dynamic hw configuration via ethtool (e.g. changing number of hw rx/tx queues). Add xdp_clear_features_flag() in order to clear all xdp_feature flag. Reviewed-by: Shay Agroskin <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-10Merge tag 'wireless-next-2023-03-10' of ↵Jakub Kicinski3-44/+299
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== wireless-next patches for 6.4 Major changes: cfg80211 * 6 GHz improvements * HW timestamping support * support for randomized auth/deauth TA for PASN privacy (also for mac80211) mac80211 * radiotap TLV and EHT support for the iwlwifi sniffer * HW timestamping support * per-link debugfs for multi-link brcmfmac * support for Apple (M1 Pro/Max) devices iwlwifi * support for a few new devices * EHT sniffer support rtw88 * better support for some SDIO devices (e.g. MAC address from efuse) rtw89 * HW scan support for 8852b * better support for 6 GHz scanning * tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits) wifi: iwlwifi: mvm: fix EOF bit reporting wifi: iwlwifi: Do not include radiotap EHT user info if not needed wifi: iwlwifi: mvm: add EHT RU allocation to radiotap wifi: iwlwifi: Update logs for yoyo reset sw changes wifi: iwlwifi: mvm: clean up duplicated defines wifi: iwlwifi: rs-fw: break out for unsupported bandwidth wifi: iwlwifi: Add support for B step of BnJ-Fm4 wifi: iwlwifi: mvm: make flush code a bit clearer wifi: iwlwifi: mvm: avoid UB shift of snif_queue wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width wifi: iwlwifi: mvm: rename define to generic name wifi: iwlwifi: mvm: allow Microsoft to use TAS wifi: iwlwifi: mvm: add all EHT based on data0 info from HW wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags wifi: iwlwifi: mvm: add an helper function radiotap TLVs wifi: radiotap: separate vendor TLV into header/content wifi: iwlwifi: reduce verbosity of some logging events wifi: iwlwifi: Adding the code to get RF name for MsP device ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-09neighbour: delete neigh_lookup_nodev as not usedLeon Romanovsky1-2/+0
neigh_lookup_nodev isn't used in the kernel after removal of DECnet. So let's remove it. Fixes: 1202cdd66531 ("Remove DECnet support from kernel") Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-09net: sched: remove qdisc_watchdog->last_expiresEric Dumazet1-1/+0
This field mirrors hrtimer softexpires, we can instead use the existing helpers. Signed-off-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+7
Documentation/bpf/bpf_devel_QA.rst b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info") d56b0c461d19 ("bpf, docs: Fix link to netdev-FAQ target") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-09sctp: add weighted fair queueing stream schedulerXin Long2-0/+2
As it says in rfc8260#section-3.6 about the weighted fair queueing scheduler: A Weighted Fair Queueing scheduler between the streams is used. The weight is configurable per outgoing SCTP stream. This scheduler considers the lengths of the messages of each stream and schedules them in a specific way to use the capacity according to the given weights. If the weight of stream S1 is n times the weight of stream S2, the scheduler should assign to stream S1 n times the capacity it assigns to stream S2. The details are implementation dependent. Interleaving user messages allows for a better realization of the capacity usage according to the given weights. This patch adds Weighted Fair Queueing Scheduler actually based on the code of Fair Capacity Scheduler by adding fc_weight into struct sctp_stream_out_ext and taking it into account when sorting stream-> fc_list in sctp_sched_fc_sched() and sctp_sched_fc_dequeue_done(). Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-09sctp: add fair capacity stream schedulerXin Long2-0/+8
As it says in rfc8260#section-3.5 about the fair capacity scheduler: A fair capacity distribution between the streams is used. This scheduler considers the lengths of the messages of each stream and schedules them in a specific way to maintain an equal capacity for all streams. The details are implementation dependent. interleaving user messages allows for a better realization of the fair capacity usage. This patch adds Fair Capacity Scheduler based on the foundations added by commit 5bbbbe32a431 ("sctp: introduce stream scheduler foundations"): A fc_list and a fc_length are added into struct sctp_stream_out_ext and a fc_list is added into struct sctp_stream. In .enqueue, when there are chunks enqueued into a stream, this stream will be linked into stream-> fc_list by its fc_list ordered by its fc_length. In .dequeue, it always picks up the 1st skb from stream->fc_list. In .dequeue_done, fc_length is increased by chunk's len and update its location in stream->fc_list according to the its new fc_length. Note that when the new fc_length overflows in .dequeue_done, instead of resetting all fc_lengths to 0, we only reduced them by U32_MAX / 4 to avoid a moment of imbalance in the scheduling, as Marcelo suggested. Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-08Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-0/+1
Andrii Nakryiko says: ==================== pull-request: bpf-next 2023-03-08 We've added 23 non-merge commits during the last 2 day(s) which contain a total of 28 files changed, 414 insertions(+), 104 deletions(-). The main changes are: 1) Add more precise memory usage reporting for all BPF map types, from Yafang Shao. 2) Add ARM32 USDT support to libbpf, from Puranjay Mohan. 3) Fix BTF_ID_LIST size causing problems in !CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor. 4) IMA selftests fix, from Roberto Sassu. 5) libbpf fix in APK support code, from Daniel Müller. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits) selftests/bpf: Fix IMA test libbpf: USDT arm arg parsing support libbpf: Refactor parse_usdt_arg() to re-use code libbpf: Fix theoretical u32 underflow in find_cd() function bpf: enforce all maps having memory usage callback bpf: offload map memory usage bpf, net: xskmap memory usage bpf, net: sock_map memory usage bpf, net: bpf_local_storage memory usage bpf: local_storage memory usage bpf: bpf_struct_ops memory usage bpf: queue_stack_maps memory usage bpf: devmap memory usage bpf: cpumap memory usage bpf: bloom_filter memory usage bpf: ringbuf memory usage bpf: reuseport_array memory usage bpf: stackmap memory usage bpf: arraymap memory usage bpf: hashtab memory usage ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-08net: reclaim skb->scm_io_uring bitEric Dumazet1-0/+1
Commit 0091bfc81741 ("io_uring/af_unix: defer registered files gc to io_uring release") added one bit to struct sk_buff. This structure is critical for networking, and we try very hard to not add bloat on it, unless absolutely required. For instance, we can use a specific destructor as a wrapper around unix_destruct_scm(), to identify skbs that unix_gc() has to special case. Signed-off-by: Eric Dumazet <[email protected]> Cc: Pavel Begunkov <[email protected]> Cc: Thadeu Lima de Souza Cascardo <[email protected]> Cc: Jens Axboe <[email protected]> Reviewed-by: Jens Axboe <[email protected]> Reviewed-by: Pavel Begunkov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-07wifi: radiotap: separate vendor TLV into header/contentMordechay Goodstein1-6/+14
To be able to use a general function later for any kind of TLV, separate the vendor TLV header/content in the structs. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230305124407.8ac5195bb3e6.I19ad99c1ad3108453aede64bddf6ef1a7c4a0b74@changeid [separate from the original combined patch] Signed-off-by: Johannes Berg <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.